JVC KD-G511 Le manuel du propriétaire

ENGLISH

FRANÇAIS

CD RECEIVER

RECEPTEUR CD

KD-G612/KD-G611/KD-G511

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0266-003A

[EX/EU]

For canceling the display demonstration, see page 8.

Pour annuler la démonstration des affichages, référez-vous à la page 8.

Cover_KD-G612[EX_EU]1.indd 2Cover_KD-G612[EX_EU]1.indd 2 10/26/04 8:55:59 PM10/26/04 8:55:59 PM

2

ENGLISH

How to forcibly eject a disc

If a disc cannot be recognized by the

receiver or cannot be ejected, ejects the disc

as follows.

“PLEASE” and “EJECT” appear alternately

on the display.

• If this does not work, try to reset your

receiver.

• Be careful not to drop the disc when it

ejects.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

How to reset your unit

This will reset the microcomputer. Your

preset adjustments will also be erased.

Note: Only for [EX] model users in UK and European countries

For security reasons, a numbered ID card is provided with this receiver, and the same ID number is

imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to

identify your receiver if stolen.

EN02-05_G612[EX_EU]1.indd 2EN02-05_G612[EX_EU]1.indd 2 10/26/04 8:56:14 PM10/26/04 8:56:14 PM

3

ENGLISH

How to reset your unit ........................... 2

How to forcibly eject a disc ................... 2

How to read this manual ........................ 4

How to use the M MODE button ........... 4

Control panel

—

KD-G612/KD-G611/KD-G511

.... 5

Parts identification ................................. 5

Remote controller —

RM-RK50

... 6

Main elements and features ................... 6

Getting started ....................... 7

Basic operations .................................. 7

Canceling the display demonstrations ... 8

Setting the clock .................................... 8

Radio operations ................... 9

Listening to the radio ........................... 9

Storing stations in memory .................... 10

Listening to a preset station ................... 10

FM RDS operations ................. 11

Searching for your favorite FM RDS

programme

....................................... 11

Storing your favorite programmes ......... 12

Using the standby receptions ................. 12

Tracking the same programme

—Network-Tracking Reception ........ 13

Disc operations ...................... 14

Playing a disc in the receiver ............... 14

Playing discs in the CD changer ........... 15

Other main functions ............................. 17

Changing the display information ......... 18

Selecting the playback modes ................ 19

Sound adjustments ................ 20

Selecting preset sound modes

(C-EQ: custom equalizer) .................. 20

Adjusting the sound ............................... 21

General settings — PSM ......... 22

Basic procedure ..................................... 22

Other main functions ............. 25

Assigning titles to the sources ............... 25

Detaching the control panel ................... 26

External component operations

... 27

Playing an external component ............ 27

DAB tuner operations

................ 28

Listening to the DAB tuner ................... 28

Storing DAB services in memory .......... 29

Tuning in to a preset DAB service ........ 29

Tracing the same programme

—Alternative Reception .................... 29

Maintenance .......................... 30

More about this receiver ........ 31

Troubleshooting ..................... 34

Specifications ......................... 37

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Contents

*For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

The receiver is equipped with the steering

wheel remote control function.

• See the Installation/Connection Manual

(separate volume) for connection.

EN02-05_G612[EX_EU]2.indd 3EN02-05_G612[EX_EU]2.indd 3 11/1/04 6:24:37 PM11/1/04 6:24:37 PM

4

ENGLISH

How to read this manual

The following methods are used to made the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see pages

31 – 33).

• Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

How to use the M MODE button

If you press M MODE, the receiver goes into

functions mode, then the number buttons and

5/∞ buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Time countdown indicator

To use these buttons for original functions

again after pressing M MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

• Pressing M MODE again also clears the

functions mode.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

EN02-05_G612[EX_EU]1.indd 4EN02-05_G612[EX_EU]1.indd 4 10/26/04 8:56:16 PM10/26/04 8:56:16 PM

5

ENGLISH

Control panel — KD-G612/KD-G611/KD-G511

1 5 (up) / ∞ (down) buttons

2 T/P TP/PTY (traffic programme/programme

type) button

3 D DISP (display) button

4 S SEL (select) button

5 • Control dial

•

(standby/on attenuator) button

6 Display window

7 Remote sensor

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

8 0 (eject) button

9

4/¢ buttons

p

(control panel release) button

q SOURCE button

w BAND button

e Number buttons

r EQ (equalizer) button

t MO (monaural) button

y SSM (Strong-station Sequential Memory)

button

u RPT (repeat) button

i RND (random) button

o M MODE button

;

AUX (auxiliary) input jack

• Only for KD-G612/KD-G611.

• NOT compatible with digital signals.

Display window

a Disc information indicators—TAG (ID3

Tag),

(folder), (track/file)

s Main display

d Source display / Volume level indicator

f EQ (equalizer) indicator

g Sound mode (C-EQ: custom equalizer)

indicators—ROCK, CLASSIC, POPS,

HIP HOP, JAZZ, USER

•

also works as the time countdown

indicator and level meter during play (see

page 23).

h Disc type indicators—WMA, MP3

j Tuner reception indicators—ST (stereo),

MO (monaural)

k RDS indicators—TP, PTY, AF, REG

l Playback source indicators—

CH: Lights up only when CD-CH is selected

as the playback source.

DISC: Lights up for the built-in CD player.

/ Playback mode / item indicators—

RND (random),

(disc), (folder),

RPT (repeat)

z LOUD (loudness) indicator

x Tr (track) indicator

Parts identification

Display window

EN02-05_G612[EX_EU]f.indd 5EN02-05_G612[EX_EU]f.indd 5 11/24/04 10:00:39 PM11/24/04 10:00:39 PM

6

ENGLISH

Remote controller — RM-RK50

Main elements and features

1 (standby/on/attenuator) button

• Turns on and off the power and also

attenuates the sound.

2 5 U (up) / D (down) ∞ buttons

• 5 U: Changes the FM/AM/DAB bands.

• D ∞: Changes the preset stations (or

services).

• Changes the folder of the MP3/WMA

discs.

• While playing an MP3 disc on an

MP3-compatible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

3 VOL – / VOL + buttons

• Adjusts the volume level.

4 SOUND button

• Selects the sound mode (C-EQ: custom

equalizer).

5 SOURCE button

• Selects the source.

6 2 R (reverse) / F (forward) 3 buttons

• Searches for stations (or services) if

pressed briefly.

• Searches for ensembles if pressed and

held.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks of the disc.

•

RM-RK50 is supplied for KD-G612/KD-G611.

• KD-G511 can be remotely controlled as

instructed here (with an optionally purchased

remote controller—recommended to use

RM-RK50).

Installing the lithium coin battery

(CR2025)

• When operating, aim the remote controller

directly at the remote sensor on the

receiver. Make sure there is no obstacle in

between.

Warning:

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

Caution:

EN06-11_G612[EX_EU]2.indd 6EN06-11_G612[EX_EU]2.indd 6 11/1/04 5:54:13 PM11/1/04 5:54:13 PM

7

ENGLISH

~

Ÿ

You cannot select some sources if they

are not ready.

* Only for KD-G612/KD-G611.

! • For FM/AM tuner only

• For DAB tuner only

⁄

Volume level appears.

Volume level indicator

@ Adjust the sound as you want.

(See pages 20 and 21.)

To drop the volume in a moment (ATT)

To restore the sound,

press it again.

To turn off the power

Getting started

Basic operations

* The control panel

illustrations used for

explanation in this

manual is KD-G612/

KD-G611.

EN06-11_G612[EX_EU]f.indd 7EN06-11_G612[EX_EU]f.indd 7 11/17/04 4:48:39 PM11/17/04 4:48:39 PM

8

ENGLISH

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

[Initial: DEMO ON]—see page 22.

1

2

3

4

Finish the procedure.

To activate the display demonstration

In step 3 above...

Setting the clock

1

2

Set the hour, minute, and clock

system.

1 Select “CLOCK H” (hour), then

adjust the hour.

2 Select “CLOCK M” (minute),

then adjust the minute.

3 Select “24H/12H,” then select

“24H” (hour) or “12H” (hour).

3 Finish the procedure.

To check the current clock time when the

power is turned off

EN06-11_G612[EX_EU]1.indd 8EN06-11_G612[EX_EU]1.indd 8 10/26/04 8:57:28 PM10/26/04 8:57:28 PM

9

ENGLISH

To tune in to a station manually

In step ! on the left...

1

2 Select the desired station frequencies.

When an FM stereo broadcast is hard to

receive

1

2

Lights up when monaural

mode is activated.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO

indicator goes off.

Radio operations

Listening to the radio

~

Ÿ

Selected band appears.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

! Start searching for a station.

When a station is received, searching

stops.

To stop searching, press the same

button again.

EN06-11_G612[EX_EU]1.indd 9EN06-11_G612[EX_EU]1.indd 9 10/26/04 8:57:29 PM10/26/04 8:57:29 PM

10

ENGLISH

2

3

4

Preset number flashes for a while.

Listening to a preset station

1

2

3 Select the preset station (1 – 6) you

want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 13.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential

Memory)

1

2 Select the FM band (FM1 – FM3)

you want to store into.

3

4

“SSM” flashes, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

1

EN06-11_G612[EX_EU]1.indd 10EN06-11_G612[EX_EU]1.indd 10 10/26/04 8:57:29 PM10/26/04 8:57:29 PM

11

ENGLISH

FM RDS operations

Searching for your favorite FM RDS programme

You can tune in to a station broadcasting your

favorite programme by searching for a PTY code.

~

The last selected PTY code appears.

Ÿ Select one of your favorite

programme type.

or

Select one of the twenty-nine PTY

codes.

Ex.: When “ROCK M” is selected

! Start searching for your favorite

programme.

If there is a station broadcasting a

programme of the same PTY code as

you have selected, that station is tuned

in.

PTY codes

NEWS, AFFAIRS, INFO, SPORT,

EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music),

ROCK M (music), EASY M (music),

LIGHT M (music), CLASSICS,

OTHER M (music), WEATHER,

FINANCE, CHILDREN, SOCIAL,

RELIGION, PHONE IN, TRAVEL,

LEISURE, JAZZ, COUNTRY,

NATION M (music), OLDIES,

FOLK M (music), DOCUMENT

EN06-11_G612[EX_EU]f.indd 11EN06-11_G612[EX_EU]f.indd 11 11/26/04 9:14:31 AM11/26/04 9:14:31 AM

12

ENGLISH

What you can do with RDS

RDS (Radio Data System) allows FM

stations to send an additional signal along

with their regular programme signals.

By receiving the RDS data, this receiver can

do the following:

•

Programme Type (PTY) Search (see page 11)

• Standby Reception of Traffic

Announcement—TA (see the following) or

your favorite programme (PTY) (see pages

13 and 23)

•

Tracing the same programme automatically

—Network-Tracking Reception (see page 13)

• Programme Search (see page 23)

Storing your favorite programmes

You can store six favorite programme types.

Preset programme types in the number buttons

(1 to 6):

1 Select a PTY code (see page 11).

2 Select the preset number (1 – 6) you

want to store into.

Ex.: When “ROCK M” is selected

3 Repeat steps 1 and 2 to store

other PTY codes into other preset

numbers.

4 Finish the procedure.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the receiver to

switch temporarily to Traffic Announcement

(TA) from any source other than AM.

The volume changes to the preset TA volume

level (see page 23).

To activate TA Standby Reception

The TP indicator either

lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

Standby Reception.)

To activate TA Standby Reception, tune in to

another station providing these signals. The

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

EN12-17_G612[EX_EU]f.indd 12EN12-17_G612[EX_EU]f.indd 12 11/25/04 9:51:34 AM11/25/04 9:51:34 AM

13

ENGLISH

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception

is not sufficient enough, this receiver

automatically tunes in to another FM RDS

station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

When shipped from the factory, Network-

Tracking Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 23.

Programme A broadcasting on different

frequency areas (01 – 05)

To check the current clock time while

listening to an FM RDS station

PTY Standby Reception

PTY Standby Reception allows the receiver

to switch temporarily to your favorite PTY

programme from any source other than AM.

To activate and select your favorite PTY

code for PTY Standby Reception, see page

23.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

PTY indicator will stop flashing and remain

lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 23).

The PTY indicator goes off.

EN12-17_G612[EX_EU]2.indd 13EN12-17_G612[EX_EU]2.indd 13 11/1/04 5:17:38 PM11/1/04 5:17:38 PM

14

ENGLISH

Disc operations

Playing a disc in the receiver

About MP3 and WMA discs

MP3 and WMA (Windows Media

®

Audio)

“tracks” (words “file” and “track” are used

interchangeably) are recorded in “folders.”

• When inserting an MP3 or a WMA disc:

*

Either the MP3 or WMA indicator lights up

depending on the detected file.

• When inserting an audio CD or a CD Text

disc:

To stop play and eject the disc

Total track

number

Total playing time

of the inserted disc

Total track number

of the inserted disc

Elapsed playing

time

Current track

number

All tracks will be played

repeatedly until you

change the source or eject

the disc.

Total folder

number

Disc information appears

automatically (see page 18).

CD Text: Disc title/performer =

Track title appears automatically

(see page 18).

Elapsed playing

time

Current track

number

Selected folder number

EN12-17_G612[EX_EU]1.indd 14EN12-17_G612[EX_EU]1.indd 14 10/26/04 8:57:46 PM10/26/04 8:57:46 PM

15

ENGLISH

~

*

If you have changed “EXT IN” setting

to “EXT IN” (see page 24), you

cannot select the CD changer.

Ÿ Select a disc.

For disc number from 01 – 06:

For disc number from 07 – 12:

Playing discs in the CD changer

About the CD changer

It is recommended to use the JVC MP3-

compatible CD changer with your receiver.

• You can also connect other CH-X series

CD changers (except CH-X99 and

CH-X100). However, they are not

compatible with MP3 discs, so you cannot

play back MP3 discs.

• You cannot use the KD-MK series CD

changers with this receiver.

• Disc text information recorded in the CD

Text can be displayed when a JVC CD

Text compatible CD changer is connected.

Before operating your CD changer:

• Refer also to the Instructions supplied

with your CD changer.

• You cannot control and play any WMA

disc in the CD changer.

All tracks of the inserted discs in the magazine

will be played repeatedly until you change

the source or eject the magazine from the CD

changer.

Selected disc number

EN12-17_G612[EX_EU]1.indd 15EN12-17_G612[EX_EU]1.indd 15 10/26/04 8:57:47 PM10/26/04 8:57:47 PM

16

ENGLISH

To fast-forward or reverse the track

Fast-forwards.

Reverses.

To go to the next or previous tracks

To the following tracks.

To the beginning of the current track, then the

previous tracks.

To go to the next or previous folders (only

for MP3 or WMA discs)

For MP3 discs:

For WMA discs:

To next folders.

To previous folders.

• When the current disc is an MP3 disc:

* “ROOT” appears if no folder is included in

the disc.

• When the current disc is an audio CD or a

CD Text disc:

Elapsed playing

time

Current track

number

Folder name*

Selected folder number

Elapsed playing

time

Current track

number

Disc information appears

automatically (see page 18).

CD Text: Disc title/performer =

Track title appears automatically

(see page 18).

EN12-17_G612[EX_EU]f.indd 16EN12-17_G612[EX_EU]f.indd 16 11/8/04 10:12:16 AM11/8/04 10:12:16 AM

17

ENGLISH

To locate a particular track (for CD) or

folder (for MP3 or WMA discs) directly

To select a number from 01 – 06:

To select a number from 07 – 12:

• To use folder search on MP3/WMA discs, it

is required that folders are assigned with

2-digits number at the beginning of their

folder names—01, 02, 03, and so on.

• To select a particular track in a folder

(for MP3 or WMA disc) after selecting a

folder:

Other main functions

Skipping a track quickly during play

• For MP3 or WMA disc, you can skip a track

within the same folder.

Ex.: To select track 32 while playing track 6

1

2

First time you press +10 or –10 button, the

track skips to the nearest higher or lower

track with a track number of multiple ten

(ex. 10th, 20th, 30th).

Then each time you press the button, you

can skip 10 tracks.

• After the last track, the first track will be

selected and vice versa.

3

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same

procedure.

EN12-17_G612[EX_EU]1.indd 17EN12-17_G612[EX_EU]1.indd 17 10/26/04 8:57:48 PM10/26/04 8:57:48 PM

18

ENGLISH

Changing the display information

While playing an audio CD or a CD Text ( / )

*

1

For KD-G612/KD-G611: If no title is assigned to an audio CD, “NO NAME” appears.

To assign a title to an audio CD, see page 25.

For KD-G511: “NO NAME” appears.

While playing an MP3 ( / ) or WMA ( ) disc

• When “TAG DISP” is set to “TAG ON” (see page 24)

*

2

If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this

case, the TAG indicator will not light up.

• When “TAG DISP” is set to “TAG OFF”

EN18-23_G612[EX_EU]1.indd 18EN18-23_G612[EX_EU]1.indd 18 10/26/04 8:58:01 PM10/26/04 8:58:01 PM

19

ENGLISH

Selecting the playback modes

You can use only one of the following playback modes at a time.

1

2 Select your desired playback mode.

Repeat play

Ex.: When “TRK RPT” is selected while

playing an MP3 disc in the receiver

Mode Plays repeatedly

TRK RPT: The current track.

• RPT lights up.

FLDR RPT*

1

: All tracks of the current folder.

•

and RPT light up.

DISC RPT*

2

: All tracks of the current disc.

•

and RPT light up.

RPT OFF: Cancels.

Random play

Ex.: When “DISC RND” is selected while

playing an MP3 disc in the receiver

Mode Plays at random

FLDR RND*

1

: All tracks of the current folder,

then tracks of the next folder and

so on.

• RND and

light up.

DISC RND: All tracks of the current disc.

• RND and

light up.

MAG RND*

2

: All tracks of the inserted discs.

• RND lights up.

RND OFF: Cancels.

*

1

Only while playing an MP3 ( / ) or WMA ( ) disc.

*

2

Only while playing discs in the CD changer ( ).

EN18-23_G612[EX_EU]1.indd 19EN18-23_G612[EX_EU]1.indd 19 10/26/04 8:58:03 PM10/26/04 8:58:03 PM

20

ENGLISH

Sound adjustments

Selecting preset sound modes (C-EQ: custom equalizer)

You can select a preset sound mode suitable to

the music genre.

~

Ÿ

Ex.: When “ROCK” is selected

Indication pattern for each sound mode:

Indication For:

Preset values

BAS

*

1

TRE

*

2

LOUD

*

3

USER (Flat sound) 00 00 OFF

ROCK Rock or

disco music

+03 +01 ON

CLASSIC Classical

music

+01 –02 OFF

POPS Light music +04 +01 OFF

HIP HOP Funk or rap

music

+02 00 ON

JAZZ Jazz music +02 +03 OFF

*

1

BAS: Bass

*

2

TRE: Treble

*

3

LOUD: Loudness

EN18-23_G612[EX_EU]f.indd 20EN18-23_G612[EX_EU]f.indd 20 11/17/04 3:39:39 PM11/17/04 3:39:39 PM

La page est en cours de chargement...

JVC KD-G511 Le manuel du propriétaire

JVC KD-G511 Le manuel du propriétaire

dans d''autres langues

Documents connexes