iHome iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing Mode d'emploi

Marque: iHome

Modèle: iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing

Catégorie: Réveils

Taper: Mode d'emploi

iBTW281v2 - QSG (English)

Size: 700 x 160 mm (unfold), 140 x 160 mm (folded)

Color: 1C + 1C

material: 154gsm, art card, 1C + 1C,

June 28, 2021 V3 Front Cover

Quick Start Guide

What’s

Included:

Meet Your iBTW281v2

AC adapter

iBTW281v2 unit

Quick Set-Up:

The Display

For warranty visit:

www.ihome.com/support

Model: iBTW281v2

Back

Top

iHome

iBTW281V2

Connect the included AC adapter to the DC

jack located on the back of the unit and

connect the other end to a working wall outlet.

Connecting the Unit

Step One

Bluetooth Pairing

Step Two

Setting Your Clock

Step Three

• Turn on your Bluetooth device and make it

‘discoverable’ by turning on Bluetooth mode.

• Press the Power Button on the iBTW281v2. The ﬁrst

time the unit is powered on, it will automatically

enter pairing mode.

• Select ‘iHome iBTW281V2’ on your device’s

Bluetooth menu to connect!

• Press and hold the Time Set Button until the

display ﬂashes.

• Press the – or + Buttons to adjust selections and

tap Time Set to conﬁrm (make sure you set the

correct AM/PM time).

• Do this for time, year, month and date.

• All done!

Daylight Savings Time:

By default, the DST Switch in the battery

compartment is set to Auto and will automatically

adjust the time in March and November.

PM Indicator

Pairing Icon

Wireless Charging

Alarm 1 Alarm 2

Wake To

Low Battery

Hands Free Icon

Sleep Icon

Bluetooth

Dimmer Icon

Voice Icon

Using Qi Wireless Charging

This unit will wirelessly charge Qi compatible wireless

charging phones. Place Qi compatible device face up on

charging rest.

Check the lightning icon on the iBTW281v2 display for

charging status:

Slow blinking icon: Device is charging properly.

Solid icon: Device is charged.

Rapid blinking icon: Device is not charging

properly. Reposition device.

Note: The lightning icon may continue to blink slowly

when iOS devices are fully charged.

CAUTION: Remove metal protective or magnetic case

from phone before charging. When charging phone, do

not place magnetic-striped or other metal objects on

the charger. Doing so could damage the object or this

unit. Qi compatible phones with metallic looking

ﬁnishes will charge normally.

Charge Your Phone Here

Snooze/Display Dimmer

Snooze: When the alarm is sounding, press the Dimmer/ZZZ Button to snooze for 9

minutes.

Dimmer: Press the Dimmer/ZZZ Button (when alarm is NOT sounding) to adjust display

brightness.

Programmable Snooze and Dimmer

Adjust the snooze duration and set a schedule for your clock backlight to automatically dim

and brighten at certain times of the day.

1. Press and hold the Dimmer/ZZZ Button.

2. Use the + or - Buttons to adjust the snooze duration from 1-29 minutes. Press the

Dimmer/ZZZ Button again to conﬁrm.

Now it’s time to set the display dimmer schedule:

3. Default is set to OFF. Toggle to ON by pressing the + Button and then the ZZZ Button to

conﬁrm. (Note: Choosing OFF will simply exit the setting.)

4. Now choose the brightness level for daytime hours using the +/- Buttons. Press ZZZ again

to conﬁrm.

5. Now set the time you want the daytime dimmer to take eect. Use the +/- Buttons and

press ZZZ again to conﬁrm.

6. Now choose the brightness level for nighttime hours. Use the +/- Buttons and press ZZZ

again to conﬁrm.

7. Finally, set the time you want the nighttime dimmer to take eect. Use the +/- Buttons

and press ZZZ again to conﬁrm.

8. Done! The icon will appear on the display when Dimmer Schedule is active.

Manual Bluetooth Pairing

1. Press and hold the Bluetooth Button on the top of the iBTW281v2 for 2 seconds.

2. Select ‘iHome iBTW281’ on your device’s Bluetooth menu to connect.

3. If pairing is successful, a voice prompt will announce “CONNECTED”, then Bluetooth indicator

appears solid blue, indicating the iBTW281v2 is ready to play music.

4. To reset Bluetooth settings, press and hold the Bluetooth Button for 10 seconds.

Playing Audio Via Bluetooth

1. Press the Play/Pause/Speakerphone Button on the unit to play or pause audio from

your linked Bluetooth device.

2. Press the – or + Buttons to adjust the volume on the unit.

Using the Speakerphone feature

The iBTW281v2 must be ON and connected to a Bluetooth device in order to receive calls.

• Press the Play/Pause/Speakerphone Button to accept an incoming call.

• Press and hold to end or ignore a call.

Color Modes

Press the Color Button repeatedly to cycle through 8 dierent modes:

• Slow Fade • Pulse to Music

• Fast Change • Sky Gradient

• Favorite Color • Nightlight

• Twinkle • OFF

Favorite Color Mode: When the unit is in stand-by,

press +/- to cycle through the color spectrum.

Charging Devices Via USB Port

1. Connect the standard size end of a USB cable

(not included) to the USB port on the back of

the unit and connect the other end to the

charging port on your device.

2. Monitor the charging on your device. Some

devices use a proprietary charging method and

will not charge using the USB port. If this

happens, you must charge your device using

the charger that came with it.

NOTE: Unit must be plugged into working

outlet to charge devices.

Battery Back-Up

The unit comes with a CR-2450 back-up battery installed to provide continuous alarm

operation and clock settings in the event of a temporary power failure. Remove the battery

pull tab before use. When the battery icon on the clock display is ﬂashing, it is time to

replace the back-up battery. The battery compartment is located on the bottom of the unit.

1. Make sure the AC adapter is connected, or you will lose

your time and alarm settings during battery replacement.

2. Use a Phillips screwdriver to open the battery compartment

door.

3. Remove the exhausted battery from the compartment and

insert 1 CR-2450 battery, checking that the + side is facing

you. Replace the compartment door. Do not overtighten.

WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged,

exposed to water, ﬁre, or high temperatures. Do not place loose batteries in a pocket, purse,

or other container containing metal objects, mix with used or other battery types, or store

with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable

laws and regulations for transport and disposal.

WARNING

• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell

battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in

just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does not

close securely, stop using the product and keep it away from children. If you think

batteries might have been swallowed or placed inside any part of the body, seek immedi-

ate medical attention.”

• Attention should be drawn to the environmental aspects of battery disposal

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered ﬁnish. A

cloth or other protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning

agents such as thinner or similar materials can damage the surface of the unit.

FCC INFORMATION

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

• Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ISED Information

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and

compliance.

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and

your body.

Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences

et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée

aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre

le fonctionnement.

L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes

sur l'exposition aux RF et la conformité.

Ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans un autre environnement.

CCe matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps. "

Tout changement ou modiﬁcation non expressément approuvé par la partie responsable de la conformité pourrait annuler

le droit de l'utilisateur à utiliser l'équipement.

CAN ICES-3(B) / NMB-3(B), CAN RSS-216/CNR-216

1 Year Limited Warranty

For warranty and full instructions, visit ihome.com/support

Questions? Visit www.ihome.com

iBTW281v2-062521-C

Printed in China

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.

However, improper use can result in potential electrical shock or ﬁre hazards. Please read and follow all safety and

operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take

special note of all warnings listed in these instructions and on the unit.

1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,

laundry tub, swimming pool or in a wet basement.

2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.

For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.

Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the ﬂow of

air through the ventilation openings.

3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other applianc-

es (including ampliﬁers) that produce heat.

4. Power Sources – The unit should be connected to a power supply only of the type described in the operating

instructions or as marked on the appliance. Only use the AC adapter that came with the unit.

5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the

unit to where it is plugged into an AC socket.

6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section for cleaning instructions.

7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any

openings or vents located on the product.

8. Attachments – Do not use attachments not recommended by the product manufacturer.

9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable

system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent

damage to the product due to lightning and power-line surges.

10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result

in a risk of ﬁre or electric shock.

11. Damage Requiring Service – The unit should be serviced by qualiﬁed service personnel when:

A. the power supply cable or plug has been damaged.

B. objects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E. the unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, remove

batteries before storage

13. Servicing – The user should not attempt to service the unit beyond those methods described in the user manual.

Service methods not covered in the operating instructions should be referred to qualiﬁed service personnel.

14. Magnetic Interference: This product’s speakers contain powerful magnets which could cause interference or

damage to sensitive equipment such as hard drives, CRT televisions and monitors, as well as medical, scientiﬁc, and

navigational devices. Keep this unit away from these products at all times.

15. Only use attachments/accessories speciﬁed by the manufacturer. This product is suitable for use in tropical and/or

moderate climates.

16. The unit should be serviced by qualiﬁed service personnel when the enclosure damaged or does not operate

normally.

17. No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

18. WARNING: To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture”

19. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

20. Do not dispose of batteries in the household trash or ﬁre

21. The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

Power/

Alarm

Reset

Color Mode/

Sleep Play/Pause/

Speakerphone

Snooze/

Dimmer

Volume

Down Volume Up

Bluetooth

Pairing

Wireless

Charging

Area

Alarm 1

Button

Alarm 2

Button

5V/1A USB Port

(for charging devices)

Time Set

9V/3.3A

DC Jack

Model: iBTW281v2

Setting and Using the Alarms

This unit features dual alarms which can be set to dierent times and alarm sources. Each is set

in the same way. Instructions are given as “Alarm Button”; use Alarm 1 Button or Alarm 2

Button to set respective alarms. Note: Each step must be completed while display is ﬂashing or

setting will time-out with any changes saved.

1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon ﬂash.

A beep sounds.

2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting).

Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the display.

3. Press the Alarm Button to conﬁrm the alarm time setting. The alarm schedule will ﬂash:

7 (every day), 5 (weekdays) or 2 (weekend only). Press the – or + Buttons to select the desired

alarm schedule.

4. Press the Alarm Button to conﬁrm the alarm schedule. The wake-to source will ﬂash.

5. Press the – or + Buttons to select the desired wake-to alarm source: Bluetooth, Tone or Light

Only (no alarm sound).

Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is

detected, the alarm will default to the last tone selected.

Wake to Tone: Press the Alarm Button to conﬁrm. Press the – or + Buttons to select the desired

tone to wake to (Tone 1 -Tone 4).

Wake to Light Only: Press the Alarm Button to conﬁrm. Select this mode to wake to silent light

only alarm. (You will then skip volume setting and advance to step 9 Wake to Light setting.)

6. Press the Alarm Button to conﬁrm wake-to source. The alarm volume will ﬂash (unless Wake to

Light is set wake to choice, then volume setting is skipped and you are done).

7. Press the – or + Buttons to adjust the alarm volume.

8. Press the Alarm Button to conﬁrm alarm volume. The current Wake to Light mode will ﬂash.

9. Press the – or + Buttons to select the desired light mode to wake to (Slow Fade, Fast, One Color,

Twinkle, Pulse, Sky Gradient, Nightlight, O ).

10. Press the Alarm Button to conﬁrm the alarm settings and exit alarm setting mode. 2 beeps will

conﬁrm alarm setting is complete. The alarm icon will remain on the display, to show the alarm is armed.

Previewing the Alarm and Turning the Alarm On/O

1. Press and release the Alarm Button to view the current alarm time.

2. Press the Alarm Button to toggle the alarm ON and OFF, indicated by the related white

alarm indicator.

3. When the alarm sounds, press the corresponding Alarm Button (1 or 2) to disable the alarm

and reset it to come on at the same time the next day.

Wireless Charging + LED Color Changing

June 28, 2021

iHome iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing Mode d'emploi

Marque: iHome

Modèle: iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing

Catégorie: Réveils

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: iHome iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing User guide

iHome iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing Mode d'emploi

iHome iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents