Avalue Technology VNS-15W01 Manuel utilisateur

Part No. E2017VN15A5R

VNS-15W01

Panel PC

Quick Reference Guide

6th Ed – 21 January 2020

Copyright Notice

VNS-15W01

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "B" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

A Message to the Customer

Customer Services

Each and every product is built to the most exacting specifications to ensure reliable

performance in the harsh and demanding conditions typical of industrial

environments. Whether your new device is destined for the laboratory or the factory floor,

you can be assured that your product will provide the reliability and ease of operation.

Your satisfaction is our primary concern. Here is a guide to our customer services. To

ensure you get the full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

2 VNS-15W01 Quick Reference Guide

Quick Reference Guide

VNS-15W01 Quick Reference Guide

3

Content

1. Getting Started ........................................................................................................ 5

1.1 Safety Precautions .................................................................................................... 5

1.2 Packing List ............................................................................................................... 5

1.3 System Specifications ............................................................................................... 6

1.4 System Overview ...................................................................................................... 9

1.4.1 Front View ................................................................................................................................ 9

1.4.2 Rear View .............................................................................................................................. 10

1.5 System Dimensions ................................................................................................ 11

2. Hardware Configuration ....................................................................................... 12

2.1 VNS-15W01 connector mapping ............................................................................. 13

2.1.1 Serial port connector (COM) .................................................................................................. 13

3. Handset Feature .................................................................................................... 14

3.1 VNS-15W01 handset function ................................................................................. 15

3.1.1 The voice come out from speaker, When the handset is on the cradle. ............................... 15

3.1.2 The voice come out from the handset, when it is lifted up. ................................................... 15

4. LED Instruction ..................................................................................................... 16

4.1 VNS-15W01 LED Programmer’s Reference manual ............................................... 17

4.1.1 Android Studio ....................................................................................................................... 17

4.1.2 Sample code .......................................................................................................................... 17

4.2 For win 10 LED instruction ...................................................................................... 18

4.2.1 GENERICEC Library API Programmer’s Reference ............................................................. 18

4.2.1.1 GENERICEC_Open ............................................................................................................................. 18

4.2.1.2 GENERICEC_Close ............................................................................................................................. 18

4.2.1.3 GENERICEC_Close ............................................................................................................................. 18

4.2.1.4 GENERICEC_Write .............................................................................................................................. 19

4.2.2 Standard Operating Procedures ............................................................................................ 20

4.2.2.1 Apps ..................................................................................................................................................... 20

4.2.2.2 Bin ........................................................................................................................................................ 21

4.2.2.3 Driver .................................................................................................................................................... 21

4.2.2.4 Sample ................................................................................................................................................. 21

4.2.2.5 Demo .................................................................................................................................................... 22

4.3 For Ubuntu 19.04 LED instruction ........................................................................... 24

4.3.1 File list .................................................................................................................................... 24

4.3.2 Building .................................................................................................................................. 24

VNS-15W01

4 VNS-15W01 Quick Reference Guide

4.3.3 EC, I2C Definition on VNS device ......................................................................................... 24

4.3.4 Operation (vns_led) ............................................................................................................... 24

4.3.5 APP & API Introduction (vns_led.c, i2c-dev.h, i2cbusses.h) ................................................. 24

4.3.5.1 Open I2C driver .................................................................................................................... 24

4.3.5.2 Set I2C device/slave address .............................................................................................. 25

4.3.5.3 Write I2C command & data .................................................................................................. 25

5. Front Touch Button /Handset Function Instruction ........................................... 27

5.1 Handset Function / Front Touch Button Instruction ................................................. 28

1. Handset function disable as default....................................................................................... 28

2. Front touch button function as Enable. .................................................................................. 29

Quick Reference Guide

VNS-15W01 Quick Reference Guide

5

1. Getting Started

1.1 Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not make

connections while the power is on. Sensitive electronic

components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC

chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

Français:

Attention!

Débranchez le câble d'alimentation de votre châssis chaque

fois que vous travaillez avec le matériel. Ne faites pas de

connexion lorsque le système est allumé. Les composants

électroniques sensibles peuvent être endommagés par les

surtensions soudaines. Seule les personnels expérimentés

de l'électronique peuvent ouvrir le châssis du PC.

Précaution!

Il faut toujours mettre à la masse pour éliminer l’électricité

statique avant de toucher la carte CPU. Les appareils

électroniques modernes sont très sensibles aux électricité

statique. Pour des raisons de sécurité, utilisez un bracelet

électrostatique. Placez tous les composants électroniques

sur une surface antistatique ou dans un sac antistatique

quand ils ne sont pas dans le châssis.

Risque d'explosion si la batterie est remplacée par un type

incorrect. Jetez les piles usagées selon les instructions

1.2 Packing List

 1 x VNS-15W01

 1 x AC/DC adapter 12V/5A 90 Screw Type (Option)

 1 x power cord (Option)

VNS-15W01

6 VNS-15W01 Quick Reference Guide

1.3 System Specifications

Component

CPU

Intel Atom Z8350

CPU Cooler (Type)

Heatsink

Memory

2GB / 4GB DDR3L

Power Supply

DC Input, 12~24V / Powered LAN 802.3AT

Microphone

1 x A-MIC

Speaker

2 x 4Ω 2.0W/2.5W(MAX) speaker(L & R)

Camera

2.0MP Camera

Wireless LAN

WIFI 802.11 b/g/n

Operating System

Windows10 IoT 2016 64bit / Android 5.1 64bit

Storage

Other Storage Device

32GB/64GB eMMC

External I/O

Serial Port

1 x RJ45 for RS232/422/485(configurable by BIOS setting)

USB Port

2 x USB 2.0 Type A

LAN Port

1 x 10/100/1000 Ethernet

Indicator Light

LED indicating bar

Others

1 x Headphone- 1 x 3.5mm Audio Jack (4 rings)

Mechanical

Power Type

DC-IN(12~24V)/ Powered LAN 802.3T)

Power Connector

Type

DC-IN : DC Jack 5.7mm

Powered LAN+ : RJ45

Dimension

472.1 x 269 x 70.1 mm

Weight

2.5kg

Color

white

Option

1 x Handset

Software

BIOS

64 bit

Reliability

EMI Test

CE/ FCC class B

Dust and Rain Test

Front Panel IP65

Vibration Test

Sine Vibration test (Non-operation)

Reference IEC60068-2-6 Testing procedures

Test Fc : Vibration sinusoidal

1 Test Acceleration : 2G

2 Test frequency : 5~500 Hz

Quick Reference Guide

VNS-15W01 Quick Reference Guide

7

3 Sweep：1 Oct/ per one minute. (logarithmic)

4 Test Axis : X,Y and Z axis

5 Test time :30 min. each axis

6 System condition : Non-Operating mode

Package Vibration Test

Reference IEC60068-2-64 Testing procedures

Test Fh : Vibration boardband random Test

1. PSD: 0.026G²/Hz , 2.16 Grms

2. Non-operation mode

3. Test Frequency : 5-500Hz

4. Test Axis : X,Y and Z axis

5. 30 min. per each axis

Random Vibration Operation

Reference IEC60068-2-64 Testing procedures

Test Fh : Vibration boardband random Test

1. PSD: 0.00454G²/Hz , 1.5 Grms

2. Operation mode

3. Test Frequency : 5-500Hz

4. Test Axis : X,Y and Z axis

5. 30 minutes per each axis

6. IEC 60068-2-64 Test:Fh

Mechanical Shock

Test

Bump Test

Reference IEC 60068-2-29 Testing procedures

Test Eb : Bump Test

1. Wave form：Half Sine wave

2. Acceleration Rate：10g for operation mode

3. Duration Time：11ms

4. No. of Shock：Z axis 300 times

5. Test Axis: Z axis

6. Operation mode

Drop Test

1. One corner , three edges, six faces

2. ISTA 2A, IEC-60068-2-32 Test:Ed

Operating

Temperature

0°C ~ 40°C

Operating Humidity

0% ~ 90% Relative Humidity, Non-condensing

Storage Temperature

-20°C ~ 60°C

VNS-15W01

8 VNS-15W01 Quick Reference Guide

Note: Specifications are subject to change without notice.

Quick Reference Guide

VNS-15W01 Quick Reference Guide

9

1.4 System Overview

1.4.1 Front View

*Note:

Insert the IC card (face down) into the Smart Card Reader slot.

Power on/off

Brightness

Up/down

Volume

Up/down

NFC

Reading Light

Camera

Smart Card

Reader*

VNS-15W01

10 VNS-15W01 Quick Reference Guide

1.4.2 Rear View

Connectors

Label

Function

Note

DC IN

DC-IN power connector

LAN

RJ-45 Ethernet

COM

Serial port connector

USB

2 x USB2.0 connector

Line-out

Line-out audio jack

Quick Reference Guide

VNS-15W01 Quick Reference Guide

11

1.5 System Dimensions

(Unit: mm)

VNS-15W01

12 VNS-15W01 Quick Reference Guide

2.Hardware

Configuration

Quick Reference Guide

VNS-15W01 Quick Reference Guide

13

2.1 VNS-15W01 connector mapping

2.1.1 Serial port connector (COM)

RS-485

Signal

DATA-

1

DATA+

2

NC

3

NC

4

GND

5

NC

6

NC

7

NC

8

RS-232

Signal

DCD

1

RXD

2

TXD

3

DTR

4

GND

5

DSR

6

RTS

7

CTS

8

RS-422

Signal

TX-

1

TX+

2

RX+

3

RX-

4

GND

5

NC

6

NC

7

NC

8

VNS-15W01

14 VNS-15W01 Quick Reference Guide

3.Handset Feature

Quick Reference Guide

VNS-15W01 Quick Reference Guide

15

3.1 VNS-15W01 handset function

3.1.1 The voice come out from speaker, When the handset is on the cradle.

3.1.2 The voice come out from the handset, when it is lifted up.

VNS-15W01

16 VNS-15W01 Quick Reference Guide

4. LED Instruction

Quick Reference Guide

VNS-15W01 Quick Reference Guide

17

4.1 VNS-15W01 LED Programmer’s Reference manual

4.1.1 Android Studio

●Put the ledlib.jar into the app "libs" folder

●Set the jar file as library

4.1.2 Sample code

●import this library in java file

●You can use the sample code to run any super user command as follows.

import tw.com.avalue.ledlibrary.LEDlibrary;

@Override

protected void onCreate(Bundle savedInstanceState) {

super.onCreate(savedInstanceState);

setContentView(R.layout.activity_main);

LEDlibrary mLed = new LEDlibrary(this);

//mLed.LedOpen(mLed.RED_LED);

//mLed.LedOpen(mLed.GREEN_LED);

mLed.LedClose();

}

VNS-15W01

18 VNS-15W01 Quick Reference Guide

4.2 For win 10 LED instruction

4.2.1 GENERICEC Library API Programmer’s Reference

After install the GENERICEC driver on the board, the API DLL file also install into Windows

system directory. The functions of API provide are list as below, refer to each function’s

description to get more detail information.

4.2.1.1 GENERICEC_Open

bool GENERICEC_Open()

Return Value:

True on success and False on failure.

Remarks:

The function will loading or initial the GENERICEC driver, for use by the application. If

the return value is False, it indicates the driver is not installing yet.

4.2.1.2 GENERICEC_Close

bool GENERICEC_Close()

Return Value:

True on success and False on failure.

Remarks:

This function will close and unload the GENERICEC driver, it must be called before the

application terminates. If the return value is False, it indicates the driver is not installing

successfully.

4.2.1.3 GENERICEC_Close

bool GENERICEC_Read(unsigned char *wbuf, int wlen, unsigned char *rbuf, int

rlen)

Return Value:

True on success and False on failure.

Parameters:

wbuf Write buffer.

wlen Write buffer length.

rbuf Read buffer.

rlen Read buffer length.

Remarks:

Write the wbuf data and read the result from the rbuf. If the return value is False, it

indicates the driver is not installing successfully or not uses the GENERICEC_Open

function first.

Quick Reference Guide

VNS-15W01 Quick Reference Guide

19

4.2.1.4 GENERICEC_Write

bool GENERICEC_Write(unsigned char *wbuf, int wlen)

Return Value:

True on success and False on failure.

Parameters:

wbuf Write buffer.

wlen Write buffer length.

Remarks:

Write the wbuf data. If the return value is False, it indicates the driver is not installing

successfully or not uses the GENERICEC_Open function first.

VNS-15W01

20 VNS-15W01 Quick Reference Guide

4.2.2 Standard Operating Procedures

After have extracted Venus.zip, it can see folder structure as follow.

4.2.2.1 Apps

a. CycleTest

Cycle Test LED ON/OFF, auto minimizes the app after executing the program.

Timer Interval: set LED ON/OFF interval seconds.

b. ManualTest

Manual test LED ON/OFF, move the app to the center of screen after executing the

program.

La page est en cours de chargement...

Avalue Technology VNS-15W01 Manuel utilisateur

Avalue Technology VNS-15W01 Manuel utilisateur

dans d''autres langues

Autres documents