Sony HT-S350 Mode d'emploi

F:\#Sagyou\1226\4748757112\4748757112HTS350UC2\00COV-

HTS350UC2\110BCO.fm

masterpage: Left

4-748-757-11(2)

http://www.sony.net/

Printed in Malaysia

Imprimé en Malaisie

HT-S350

4-748-757-11(2)

F:\#Sagyou\1226\4748757112\4748757112HTS350UC2\00COV-

HTS350UC2\010COV.fm

masterpage:

Right

HT-S350

4-748-757-11(2)

Sound Bar

Barre de son

Barra de sonido

HT-S350

Operating Instructions US

Manuel d’instructions FR

Manual de instrucciones ES

2

US

Owner’s Record

The model and serial numbers are

located on the bottom of the Bar

Speaker. Record the serial numbers in

the space provided below. Refer to

them whenever you call upon your Sony

dealer regarding the Sound Bar.

Model No. HT-S350

Serial No.

To reduce the risk of fire or electric

shock, do not expose this Sound Bar

to rain or moisture.

The Sound Bar is not disconnected from

the mains as long as it is connected to

the AC outlet, even if the Sound Bar

itself has been turned off.

To reduce the risk of fire, do not cover

the ventilation opening of the Sound

Bar with newspapers, tablecloths,

curtains, etc.

Do not expose the Sound Bar to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this Sound Bar to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the Sound Bar.

As the main plug is used to disconnect

the Sound Bar from the mains, connect

the Sound Bar to an easily accessible AC

outlet. Should you notice an

abnormality in the Sound Bar,

disconnect the main plug from the AC

outlet immediately.

Do not install the Sound Bar in a

confined space, such as a bookcase or

built-in cabinet.

CAUTION

Risk of explosion if the battery is

replaced by an incorrect type.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

For the Bar Speaker

The nameplate is located on the bottom

of the Bar Speaker.

For the customers in the U.S.A.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of

the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety. If

the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

WARNING

3

US

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required

when the apparatus has been

damaged in any way, such as power-

supply cord or plug is damaged,

liquid has been spilled or objects

have fallen into the apparatus, the

apparatus has been exposed to rain

or moisture, does not operate

normally, or has been dropped.

NOTE:

This Sound Bar has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This Sound

Bar generates, uses and can radiate

radio frequency energy and, if not

installed and used in accordance with

the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this Sound Bar does cause

harmful interference to radio or

television reception, which can be

determined by turning the Sound Bar off

and on, the user is encouraged to try to

correct the interference by one or more

of the following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

Sound Bar and receiver.

– Connect the Sound Bar into an outlet

on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals in order to meet FCC

emission limits.

If you have any questions about this

Sound Bar:

Visit: www.sony.com/support

Contact: Sony Customer Information

Service Center at 1-800-222-SONY

(7669)

Write: Sony Customer Information

Service Center 12451 Gateway Blvd., Fort

Myers, FL 33913

Supplier’s Declaration of Conformity

Trade Name: SONY

Model No.: HT-S350

Responsible Party: Sony Electronics Inc.

Address: 16535 Via Esprillo, San Diego,

CA 92127 USA

Telephone No.: 858-942-2230

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this Sound Bar.

US

4

US

This Sound Bar must not be co-located

or operated in conjunction with any

other antenna or transmitter.

This Sound Bar complies with FCC

radiation exposure limits set forth for an

uncontrolled environment and meets

the FCC radio frequency (RF) Exposure

Guidelines. This Sound Bar should be

installed and operated keeping the

radiator at least 20cm or more away

from person’s body.

For the customers in Canada

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

This Sound Bar contains licence-exempt

transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic

Development Canada’s license-exempt

RSS(s). Operation is subject to the

following two conditions:

This Sound Bar complies with ISED

radiation exposure limits set forth for an

uncontrolled environment and meets

RSS-102 of the ISED radio frequency (RF)

Exposure rules. This Sound Bar should

be installed and operated keeping the

radiator at least 20cm or more away

from person’s body.

(1) This Sound Bar may not cause

interference; and

(2) This Sound Bar must accept any

interference, including interference

that may cause undesired operation

of the Sound Bar.

5

US

Table of Contents

About These Operating

Instructions ..............................5

What’s in the Box ..........................6

What You Can Do with the Sound

Bar ............................................ 7

Guide to Parts and Controls ..........8

Connecting a TV

Connecting Sony TV with the

BLUETOOTH Function

Wirelessly .............................. 15

Mounting the Bar Speaker on a

Wall .........................................17

When the TV Remote Control does

not Work ................................ 19

Listening to the Sound

Listening to a TV and Other

Devices ..................................20

Adjusting the Sound .....................21

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device .................................... 23

Turning the Sound Bar On by

Operating the BLUETOOTH

Device ....................................25

Turning the BLUETOOTH Function

Off ..........................................25

Using the Various Functions

Performing the Wireless Connection

of the Subwoofer

(SECURE LINK) ........................26

Using the Control for HDMI

Function ................................. 27

Using the “BRAVIA” Sync

Function .................................28

Notes on HDMI Connections .......29

Saving Power Consumption ........29

Troubleshooting

Troubleshooting ..........................30

Resetting the Sound Bar .............35

Additional Information

Specifications ...............................36

Supported Input Audio Formats

(TV Input) ............................... 37

On BLUETOOTH

Communication .....................38

Precautions ..................................39

About These Operating

Instructions

•The instructions in these Operating

Instructions describe the controls on

the remote control.

•Some illustrations are presented as

conceptual drawings, and may be

different from the actual products.

•The default settings are underlined on

each feature description.

Example: Control for HDMI function on

Connecting a TV

with an HDMI

Cable



Startup Guide

(separate

document)

6

US

What’s in the Box

•Bar Speaker (1)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• Optical digital cable (1)

• WALL MOUNT TEMPLATE (1)

•Startup Guide

• Operating Instructions

7

US

What You Can Do with the Sound Bar

“Listening to a TV and Other

Devices” (page 20)

Blu-ray Disc™ player, cable

box, satellite box, etc.

Connecting the TV

(refer to “Startup Guide” (separate

document))

“Using the Control for HDMI

Function” (page 27)

“Using the “BRAVIA” Sync

Function” (page 28)

“Performing the Wireless

Connection of the Subwoofer

(SECURE LINK)” (page 26)

“Listening to Music from a

Mobile Device” (page 23)

“Connecting Sony TV

with the BLUETOOTH

Function Wirelessly”

(page 15)

8

US

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 Remote control sensor

Point the remote control at the

remote control sensor to operate

the Sound Bar.

 (power) button

Turns on the Sound Bar or sets it to

standby mode.

 (TV) button (page 20)

 BLUETOOTH button (page 23)

 +/– (volume) buttons

Bar Speaker

9

US

 Indicators

A lighting or flashing of the indicators on the Bar Speaker indicates the following

state.

Currently selected input

Sound format, surround effect

Volume

Indicators Status

Lights while TV input is selected.

Lights while BLUETOOTH input is selected.

Light while the Sound Bar is connected to the TV with the

BLUETOOTH function (TV input is selected).

Indicators Status

• Lights while 5.1ch Multi-channel sound is input.

• Flashes once while the sound mode is selected (page 21).

Indicators Status

Flashes once when the volume level is set to low (1 - 20).

Flash once when the volume level is set to medium (21 - 40).

Flash once when the volume level is set to high (41 - 49).

• Flash repeatedly while the sound is muted.

• Flash twice when the volume level is set to maximum/minimum.

or

The current input indicator flashes once when adjusting the

subwoofer volume by pressing SW

 +/–.

Flash three times when the subwoofer volume level is set to

maximum/minimum.

10

US

Setting value for each function

The on/off setting for each function is indicated by the number of times the following

indicator flashes.

• On: Flashes twice.

• Off: Flashes once.

For the indicator status when settings other than the on/off setting are changed, see

the description for each function.

Indicators Functions

•Night mode (page22)

•Voice mode (page22)

•Audio DRC (page22)

• Control for HDMI (page 27)

• BLUETOOTH standby (page 25)

• BLUETOOTH function (page 25)

• Auto standby (page 29)

• IR repeater (page 19)

Connecting a TV with the BLUETOOTH function (page 15).

11

US

Rear

 HDMI OUT (TV (ARC)) jack

Connect a TV that has an HDMI

input jack with an HDMI cable (not

supplied).

The Sound Bar is compatible with

ARC (page 27). ARC is the function

that sends TV sound to an AV device

such as the Sound Bar from the TV’s

HDMI input jack.

 TV IN (OPTICAL) jack

 IR repeater (page 19)

Transmits the remote signal of the

TV remote control to the TV.

12

US

 Status indicator

Indicates the status of the

subwoofer power and Bar Speaker

connection.

– Lights in green: The connection

between the subwoofer and Bar

Speaker is established.

– Flashes in green: The connection

between the subwoofer and Bar

Speaker is in progress.

– Lights in orange: The connection

between the subwoofer and Bar

Speaker is established with the

Secure Link function.

– Flashes in orange: The connection

between the subwoofer and Bar

Speaker with the Secure Link

function is in progress.

– Lights in red: The subwoofer is in

standby mode.

– Lights off: The subwoofer is

turned off.

 (power) button

Turns on/off the subwoofer.

 LINK button (page 26)

 Ventilation holes

For safety, do not block the

ventilation holes.

Subwoofer

13

US

Some buttons function differently

depending on how long the button is

pressed. The icons below indicate how

long to press the button.

• : Press the button.

• : Press and hold the button for 5

seconds.

 TV (page 20)

Selects the TV input.

 BLUETOOTH (page 20, 24)

Selects the BLUETOOTH input.

 AUTO SOUND (page 21)

Selects AUTO SOUND for the sound

effect.

 VOICE

: Turns on/off the voice mode.

(page 22)

: Turns on/off the Control for

HDMI function. (page 27)

  (volume) +*/–

Adjusts the volume.

 SW  (subwoofer volume) +/–

Adjusts the volume of the

subwoofer.

 GAME (page 21)

Selects GAME for the sound effect.

 SPORTS (page 21)

Selects SPORTS for the sound effect.

 SECURE LINK (page 26)

: Starts the link setting for the

Secure Link function.

 (power)

Turns on the Sound Bar or sets it to

standby mode.

 CINEMA (page 21)

Selects CINEMA for the sound

effect.

 MUSIC (page 21)

Selects MUSIC for the sound effect.

 NIGHT

: Turns on/off the night mode.

(page 22)

: Turns on/off the BLUETOOTH

standby mode. (page 25)

Remote Control

14

US

  (muting)

Turns off the sound temporarily or

turns on the sound.

 AUDIO*

: Selects the audio channel for

Dolby Digital multiplex broadcast.

(page 22)

: Turns on/off the Audio DRC

function. (page 22)

 NEWS (page 21)

Selects NEWS for the sound effect.

 STANDARD

: Selects STANDARD for the

sound effect. (page 21)

: Turns on/off the IR repeater

function. (page 19)

 INDICATORS

: Turns on/off the indicators on

the Bar Speaker.

: Turns on/off the auto standby

function. (page 29)

*The + and AUDIO buttons have a

tactile dot. Use it as a guide during

operation.

Tip

You can turn the indicators off by pressing

INDICATORS.

Even if the indicators are turned off by

pressing INDICATORS, when you operate

the Sound Bar, the indicators in relation to

the operation light or flash.

About the replacement of

batteries for the remote control

When the Sound Bar does not respond

by operating with the remote control,

replace two batteries with new

batteries.

Use R03 (size AAA) manganese

batteries for replacement.

15

US

Connecting a TV with an

HDMI Cable

Refer to Startup Guide (separate

document).

Connecting Sony TV with

the BLUETOOTH Function

Wirelessly

When using Sony TV* with the

BLUETOOTH function, you can listen to

sound of the TV or device that is

connected to the TV by connecting the

Sound Bar and TV wirelessly.

* The TV needs to be compatible with

A2DP (Advanced Audio Distribution

Profile).

To connect the Sound Bar and TV

wirelessly, you need to perform pairing

of the Sound Bar and TV by using the

BLUETOOTH function.

Pairing is the process required to

mutually register the information on

BLUETOOTH devices to be connected

wirelessly in advance.

1 Insert batteries (supplied) into the

remote control.

2 Turn on the TV.

3 Turn on the Bar Speaker and

subwoofer.

4 Point the remote control at the

remote control sensor on the Bar

Speaker, and press and hold TV on

the remote control and the

BLUETOOTH button on the Bar

Speaker simultaneously for 5

seconds.

The TV and BLUETOOTH indicators

flash twice, the Sound Bar enters

the pairing mode, then the

BLUETOOTH indicator flashes

quickly.

Connecting a TV

Connecting the Sound Bar

and TV Wirelessly

Blu-ray Disc player,

cable box, satellite

box, etc.

TV

BLUETOOTH

button

16

US

5 On the TV, search the Sound Bar

by performing the pairing

operation.

The list of the BLUETOOTH devices

that are searched appears on the TV

screen.

For the operation method to pair

the BLUETOOTH device to the TV,

refer to the operating instructions of

the TV.

6 Pair the Sound Bar and TV by

selecting “HT-S350” from the list

on the TV screen.

7 Make sure that the TV and

BLUETOOTH indicators on the Bar

Speaker light.

A connection between the Sound

Bar and TV has been established.

8 Select the program or input of the

TV by using the TV remote control.

The sound of the displayed image

on the TV screen is output from the

Sound Bar.

9 Adjust the volume of the Sound

Bar by using the TV remote

control.

When pressing the muting button

on the TV remote control, the sound

is muted temporarily.

• If the TV sound is not output from the

Sound Bar, press TV on the remote

control of the Sound Bar to select the TV

input and check the status of the

indicators on the Bar Speaker.

– The TV and BLUETOOTH indicators light:

The Sound Bar and TV are connected

and TV sound is output from the Sound

Bar.

– The BLUETOOTH indicator flashes

quickly: Perform pairing on the TV.

– The TV indicator lights: Perform the

connecting operation again from the

start.

• When you connect the Sound Bar and TV

with an HDMI cable (not supplied), the

BLUETOOTH connection is canceled. To

connect the Sound Bar and TV with the

BLUETOOTH function again, disconnect

the HDMI cable, then perform the

connecting operation from the start.

• To pair another TV after the first TV is

paired, turn off the paired TV, then pair

the new one by following the steps of

mobile device connection (page 23).

You can turn the Sound Bar on/off,

adjust the volume, and mute the sound

by using the TV remote control when

connecting the TV to the Sound Bar

wirelessly.

1 Turn the TV on with the TV remote

control.

The Sound Bar is turned on by

interlocking with the TV power and

BLUETOOTH

indicator

Remote control sensor

Notes

Listening to the Sound of the

TV or Device that is

Connected to the TV

17

US

TV sound is output from the Sound

Bar.

2 Select the program or input of the

device by using the TV remote

control.

The sound of the image displayed

on the TV screen is output from the

Sound Bar.

3 Adjust the volume of the Sound

Bar by using the TV remote

control.

When pressing the mute button on

the TV remote control, the sound is

muted temporarily.

Tip

When the TV is turned off, the Sound Bar is

also turned off by interlocking with the TV

power.

Mounting the Bar

Speaker on a Wall

You can mount the Bar Speaker on a

wall.

•Prepare screws (not supplied) that are

suitable for the wall material and

strength. As a plasterboard wall is

especially fragile, attach the screws

securely in the wall beam. Install the

speakers horizontally, hung by screws in

studs in a continuous flat section of the

wall.

• Have the installation done by a Sony

dealer or licensed contractor and pay

special attention to safety during the

installation.

• Sony shall not be held responsible for

accidents or damage caused by improper

installation, insufficient wall strength,

improper screw installation or natural

disaster, etc.

Notes

18

US

1 Prepare two screws (not supplied)

that are suitable for the wall

mount holes on the rear of the Bar

Speaker.

2 Stick WALL MOUNT TEMPLATE

(supplied) on a wall.

1 Align TV CENTER LINE () of

WALL MOUNT TEMPLATE with the

center line of your TV.

2 Align TV BOTTOM LINE () of

WALL MOUNT TEMPLATE with the

bottom of your TV, then stick

WALL MOUNT TEMPLATE on a

wall by using a commercially

available adhesive tape, etc.

3 Fasten the screws into the marks

() on SCREW LINE () of WALL

MOUNT TEMPLATE as in the

illustration below.

4 Remove WALL MOUNT TEMPLATE.

5 Hang the Bar Speaker on the

screws.

Align the holes of the rear of the Bar

Speaker with the screws, then hang

the Bar Speaker on the two screws.

When sticking WALL MOUNT TEMPLATE,

smooth it out fully.

Hole on the rear of the Bar Speaker

4mm (3/16 in)

More than 30 mm (1 3/16 in)

5 mm

(7/32 in)

10 mm

(13/32 in)

Center of the TV

WALL MOUNT

TEMPLATE

Adhesive tape,

etc.

Note

Screws

Marks ()

10 mm to

11 mm

(approx.

7/16 in)

368.5 mm

(14 1/2 in)

368.5 mm

(14 1/2 in)

19

US

When the TV Remote

Control does not Work

When the Bar Speaker obstructs the

remote control sensor of the TV, the TV

remote control may not work. In that

case, enable the IR repeater function of

the Sound Bar.

You can control the TV with the TV

remote control by sending the remote

signal from the rear of the Bar Speaker.

Press and hold STANDARD for 5

seconds to set the function to on or

off.

• Be sure to check that the TV remote

control cannot control the TV, and then

set the IR repeater function to on. If it is

set to on when the remote control can

control the TV, appropriate operation

may not be obtained because of the

interference between the direct

command from the remote control and

the command via the Bar Speaker.

• If the IR repeater function is set to on, this

function may not work depending on

your TV. Also, the remote controls of

other devices such as an air conditioner

may not work correctly. In this case,

change the installation position of the Bar

Speaker or TV.

IR repeater on

The BLUETOOTH indicator flashes twice.

IR repeater off

The BLUETOOTH indicator flashes once.

Notes

20

US

Listening to a TV and

Other Devices

1 Press TV or BLUETOOTH.

The indicator of the selected input

on the Bar Speaker lights.

2 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote

control.

Tip

You can also select the input by pressing 

(TV) or BLUETOOTH on the Bar Speaker.

• When the input source does not contain

much bass sound, such as in TV

programs, the bass sound from the

subwoofer may be difficult to hear.

•SW  +/– does not work when the

subwoofer is not connected.

Listening to the Sound

TV

 +/–

SW  +/–

BLUETOOTH

TV input

• TV that is connected to the TV IN

(OPTICAL) jack on the Bar Speaker

• TV compatible with the ARC function

that is connected to the HDMI OUT (TV

(ARC)) jack on the Bar Speaker

When you connect the TV to both the

HDMI OUT (TV (ARC)) and TV IN

(OPTICAL) jacks, the jack for audio input

is selected depending on which audio

signal is input first.

BLUETOOTH input

BLUETOOTH device that supports A2DP

For details, see “Listening to Music from

a Mobile Device” (page 23).

Notes

La page charge ...

Sony HT-S350 Mode d'emploi

Sony HT-S350 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents