9A10020800
SR-L35
CD Receiver
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
Z
?
FRANÇAIS
ENGLISH
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
< Do not expose this apparatus to dripps or splashes.
< Do not place any objects filled with liquids, such as
vases, on the apparatus.
< Do not install this apparatus in a confined space such
as a book case or similar unit.
< The apparatus draws nominal non-operating power
from the AC outlet with its POWER switch in the off
position.
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT SAFETY
INSTRUCTIONS
ENGLISH
3
For U.S.A.
①
Optical pickup :
Type : CMS-M95BG6
Manufacturer : SAMSUNG
Laser output : 0.5mW on the objective lens
Wavelength : 760 - 800 nm
(rear panel of the unit)
CAUTION
< DO NOT REMOVE THE EXTERNAL CASES OR
CABINETS TO EXPOSE THE ELECTRONICS. NO USER
SERVICEABLE PARTS ARE WITHIN!
< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS
PRODUCT, CONTACT TEAC FOR A SERVICE
REFERRAL. DO NOT USE THE PRODUCT UNTIL IT
HAS BEEN REPAIRED.
< USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
WARNING : TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the equipment and/or the
receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
Changes or modifications to this equipments not
expressly approved by TEAC CORPORATION for
compliance will void the user’s warranty.
For U.S.A.
This product has been designed and manufactured
according to FDA regulations “title 21, CFR, chapter 1,
subchapter J, based on the Radiation Control for
Health and Safety Act of 1968“, and is classified as
class 1 laser product. There is not hazardous invisible
laser radiation during operation because invisible laser
radiation emitted inside of this product is completely
confined in the protective housings.
The label required in this regulation is shown
①.
4
Contents
Thank you for choosing TEAC. Read this manual
carefully to get the best performance from this
unit.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 2
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Compact Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . 6
RESET Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Use of the Folding Supports . . . . . . . . . . . . . . . . . . . 7
Names of Each Control . . . . . . . . . . . . . . . . . . . . . . . 8
CD
Playing a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programmed Playback. . . . . . . . . . . . . . . . . . . . . . . 12
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Shuffle Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TUNER
Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . 15
How to Preset Stations . . . . . . . . . . . . . . . . . . . . . . 16
How to select Preset Stations . . . . . . . . . . . . . . . . . 16
Listening the the Extenal Sources . . . . . . . . . . . . . . 17
Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Clock Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Before Use
Read this before operation
< As the unit may become warm during operation,
always leave sufficient space around the unit for
ventilation.
< The voltage supplied to the unit should match the
voltage as printed on the rear panel. If you are in
any doubt regarding this matter, consult an
electrician.
< Choose the installation location of your unit
carefully. Avoid placing it in direct sunlight or close
to a source of heat. Also avoid locations subject to
vibrations and excessive dust, heat, cold or
moisture.
< Do not place the unit on any high heat-producing
units like your amplifier/receiver.
< Do not use the unit in the hot place (over
85°F/30°C).
< Do not open the cabinet as this might result in
damage to the circuitry or electrical shock. If a
foreign object should get into the set, contact your
dealer or service agency.
< When removing the power plug from the wall
outlet, always pull directly on the plug, never yank
the cord.
< To keep the laser pickup clean, do not touch it, and
do not leave the CD compartment open.
< Do not attempt to clean the unit with chemical
solvents as this might damage the finish. Use a
clean, dry cloth.
< Keep this manual in a safe place for future
reference.
DO NOT MOVE THE UNIT DURING CD PLAYBACK
During playback, the disc rotates at high speed. Do
NOT lift or move the unit during playback. Doing so
may damage the disc.
WHEN MOVING THIS UNIT
When changing places of installation or packing the
unit for moving, be sure to remove the disc. Then,
press the power switch to switch the unit back to
standby, and disconnect the power cord. Moving
this unit with the disc loaded may result in damage
to this unit.
Beware of condensation
When the unit (or a disc) is moved from a cold to a
warm place, or used after a sudden temperature
change, there is a danger of condensation; vapor in
the air could condense on the internal mechanism,
making correct operation impossible. To prevent
this, or if this occurs, leave the unit for one or two
hours with the power turned on. The unit will
stabilize at the temperature of its surroundings.
Maintenance
If the surface of the unit gets dirty, wipe with a soft
cloth or use diluted neutral cleaning liquid. Be sure
to remove any fluid completely. Do not use thinner,
benzine or alcohol as they may damage the surface
of the unit.
CAUTION
The product shall not be exposed to dripping or
splashing and that no object filled with liquids, such
as vases, shall be placed on the product.m
Do not install this equipment in a confined space
such as a book case or similar unit.
Discs which can be played on this unit:
• Conventional audio CDs bearing the “Compact
Disc Digital Audio” logo:
?
• Properly finalized CD-R and CD-RW discs
Note:
< Depending on the quality of the disc and/or the
condition of the recording, some CD-R and CD-RW
discs may not be playable.
< Copy-protected discs and other discs which do not
conform to the CD standard may not play back
correctly in this player.
If you use such discs in this unit, TEAC Corporation
and its subsidiaries cannot be responsible for any
consequences or guarantee the quality of
reproduction. If you experience problems with such
non-standard discs, you should contact the
producers of the disc.
5
ENGLISH
Compact Disc
< Never use such chemicals as record sprays,
antistatic sprays or fluid, benzine or thinner to clean
the discs. Such chemicals will do irreparable
damage to the disc’s plastic surface.
< Discs should be returned to their cases after use to
avoid dust and scratches that could cause the laser
pickup to “skip.”
< Do not expose discs to direct sunlight or high
humidity and temperature for extended periods.
Long exposure to high temperatures will warp the
disc.
< CD-R/CD-RW discs are more sensitive to the effects
of heat and ultraviolet rays than ordinary CDs. It is
important that they are not stored in a location
where direct sunlight will fall on them, and which is
away from sources of heat such as radiators or
heat-generating electrical devices.
< Printable CD-R/CD-RW discs aren’t recommended,
as the label side might be sticky and damage the
unit.
< Do not stick papers or protective sheets on the
discs and do not use any protective coating spray.
< Use a soft oil-based felt-tipped pen to write the
information on the label side. Never use a ball-point
or hard-tipped pen, as this may cause damage to
the recorded side.
< Never use a stabilizer. Using commercially available
CD stabilizers with this unit will damage the
mechanisms and cause them to malfunction.
< Do not use irregular shape CDs (octagonal, heart-
shape, etc.). CDs of this sort can damage the unit.
< Always place the disc on the disc tray with the label
side uppermost. (Compact discs can be played or
recorded only on one side.)
< To remove a disc from its storage case, press down
on the center of the case and lift the disc out,
holding it carefully by the edges.
How to remove the disc
How to hold the disc
< Should the disc become dirty, wipe the surface
radially with a soft, dry cloth.
< If you are in any doubt as to the care and handling
of a CD-R/CD-RW disc, read the precautions
supplied with the disc, or contact the disc
manufacturer directly.
The provided Remote Control Unit allows the unit to
be operated from a distance.
When operating the remote control unit, point it
towards the REMOTE SENSOR on the front panel of
the unit.
< Even if the remote control unit is operated within
the effective range, remote control operation may
be impossible if there are any obstacles between
the unit and the remote control.
< If the remote control unit is operated near other
appliances which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly.
Conversely, the other appliances may operate
incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two “AAA” (R03, UM-4) dry batteries.
Make sure that the batteries are inserted with
their positive “+” and negative “_” poles
positioned correctly.
3. Close the cover.
Battery Replacement
If the distance required between the remote control
unit and main unit decreases, the batteries are
exhausted. In this case replace the batteries with
new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive
“+” and negative “_” polarities.
< Use batteries of the same type. Never use different
types of batteries together.
< Rechargeable and non-rechargeable batteries can
be used. Refer to the precautions on their labels.
< When the remote control unit is not to be used for
a long time (more than a month), remove the
batteries from the remote control unit to prevent
them from leaking. If they leak, wipe away the
liquid inside the battery compartment and replace
the batteries with new ones.
< Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.
Remote Control Unit
RESET Switch
In the following cases, function buttons may not
work properly.
• When the system is damaged by some electrical
shock.
• When the power is irregular or has electrical
noise.
In these cases, press the RESET switch once or twice
lightly with a pencil or a ball-point pen when the
unit is on.
6
ENGLISH
Wall Mounting
Use of the folding supports
If you want to, you can mount the unit on a wall.
You need to have hooks available that snugly fit into
the hanging holes in the back of the unit.
Precaution:
< Be aware of the best possible direction for receiving
AM broadcasts (this unit has no AM anntena you
can turn around).
1. Use the supplied guide sheet to mark the exact
drilling points on the wall.
2. Drill holes in the wall at the marked points.
3. Screw your hooks into the wall.
4. Using the hanging holes in the back of the
unit, carefully hang it onto the hooks.
Note:
< Ensure that the unit locks onto the hooks and that
the hooks are strong enough to support the weight
before releasing the hands.
For better stability in using the unit on a table or other
flat surface, you can pull out the pair of hinged
supports, as shown.
7
8
Names of Each Control
BA
T
C ED
P
Q
N OL L
SR
F G H I J K
A
H
M
Q
K
U
V
J
N
P
M
TOP
FRONT
REAR
REMOTE CONTROL
9
ENGLISH
STANDBY/ON switch
Press this switch to switch the unit between power
on and standby.
OPEN/CLOSE button
Press this button to open and close the CD
compartment.
TIMER/SLEEP button
Use this button to set the timer or sleep timer.
Display button
Use this button to change the display mode.
CD compartment
Press the OPEN/CLOSE button on top of the unit to
open the CD compartment.
Remote sensor
Display
REPEAT/PRESET button
Use this button to change the repeat mode or select
a preset number and station.
MEMORY/CLOCK ADJ button
Use this button to program tracks or to adjust the
clock.
BAND button
Use this button to select FM or AM.
FUNCTION button
Press this button to switch between CD, TUNER,
and AUX.
Speakers (stereo)
MUTING button
Use this button to cut the sound temporarily.
TUNING button
Use this button to tune in a station.
N
M
L
K
J
I
H
G
F
E
D
C
B
A
SHUFFLE button
Use this button to select shuffle playback mode.
CD operation buttons
When TUNER is selected, these buttons won’t work.
STOP button (H)
Use this button to stop playback.
PLAY/PAUSE button (y/J)
Use this button to start or pause playback.
SKIP/SEARCH buttons
(.
m
/
,
/)
Press these buttons to skip tracks.
Hold down these buttons to search for a part of a
track.
VOLUME button
Use this button to adjust the volume.
AUX IN jacks
Connect external sources to these jacks.
FM antenna terminal
Connect lead-type FM antenna to this terminal.
Tune in an FM station and extend the lead to find
the best position for the reception. Then fix it to the
wall with thumb tacks or the like.
PHONES
Insert the headphones plug into the PHONES jack,
and adjust the volume.
AC adaptor
First plug the power cord running out the AC
adaptor into the DC-IN jack on the left side of the
unit, then plug the adaptor into an AC wall socket.
SLEEP button
Use this button to set the sleep timer.
V
U
T
S
R
Q
P
O
The equipment draws nominal nonoperating
power from the AC outlet with its STANDBY/ON
switch in the STANDBY position.
Press the STANDBY/ON switch to turn the unit
ON.
Press the FUNCTION button to select “CD”.
< When no disc is in the unit, “no dISC” will be
displayed.
Press the OPEN/CLOSE button (L) to open the
CD compartment.
3
2
1
Playing a CD
Put a disc onto the center spindle in the CD
compartment, with the label side facing you,
and press the OPEN/CLOSE button to close the
CD compartment.
< CD’s must be pressed securely onto the Spindle,
until a “CLICK” is heard.
< Never place more than one disc in the CD player.
< It takes a few seconds for the unit to read the
contents of the disc. No button will work during
reading. Wait until the total number of the tracks
and total play time of the disc is displayed.
Press the PLAY/PAUSE button (y/J) to start
playback.
Playback starts from the first track.
When playback of all the tracks has finished, the
unit stops automatically.
5
4
1 3 42
5
10
When opening and closing, press the OPEN/CLOSE
button (L) on top of the unit. Do not force the
door by hand during opening and closing
operations.
11
ENGLISH
Search for a part of a track
During playback, hold down the SKIP/SEARCH
button (.
m
or
,
/) and release it when
the part you want to listen to is found.
DISPLAY button
During playback, press this button repeatedly to
change the display mode as follows:
< Clock display and timer mode display appears for 4
seconds and returns to original display.
< Remaining time of the disc cannot be selected in
the Stop, Repeat, and Shuffle modes.
MUTING button
To cut the sound temporarily, press the MUTING
button. Press the MUTING button again to restore
the sound. If you change the volume during the
muting, the muting will be canceled.
F
E
D
BDCF A
E
Playing time of the current track
Remaining time of the disc
Clock display
Timer mode display
To stop playback
Press the STOP button (H) to stop playback.
To suspend playback temporarily (pause
mode)
Press the PLAY/PAUSE button (y/J). Playback
stops at the current position.
To resume playback, press the PLAY/PAUSE button
(y/J) again.
To skip to the next or a previous track
During playback, press the SKIP/SEARCH button
(.
m
or
,
/) repeatedly until the desired
track is found. The selected track will be played
from the beginning.
In the stop mode, press the SKIP/SEARCH button
(.
m
or
,
/) repeatedly until the desired
track is found, and press the PLAY/PAUSE button
(y/J) to start playback from the selected track.
< When the .
m
button is pressed once during
playback, the track being played will be played
from the beginning. To return to the beginning of
the previous track, press the .
m
button
twice.
< During programmed playback, the next or previous
track in the program is played.
C
B
A
Repeat step and to program more tracks.
< You can program up to 20 tracks.
< To cancel the program mode, press the STOP
button (H).
When the selection of track numbers has been
finished, press the PLAY/PAUSE button (y/J)
to start program playback.
If the PLAY/PAUSE button isn’t pressed within 10
seconds, the MEMORY indicator will go off. In that
case, press the MEMORY/CLOCK ADJ button and
then press the PLAY/PAUSE button to start program
playback.
The programmed contents are kept in memory
even after switching from CD mode to TUNER or
the unit switches from power on to standby.
4
32
Up to 20 tracks can be programmed in the desired
order.
< Shuffle playback does not work during program
playback.
< Insert a disc and select “CD” before beginning
programming.
Press the MEMORY/CLOCK ADJ button in the
stop mode.
“MEMORY” indicator blinks, and “P-01” appears
on the display.
Within 10 seconds, press the SKIP/SEARCH
button to select a track.
< If the SKIP/SEARCH button isn’t pressed within 10
seconds, program mode will be canceled.
While “MEMORY” is blinking on the display,
press the MEMORY/CLOCK ADJUST button.
The track is programmed, and “P-02” is displayed.
3
2
1
Programmed Playback
1 3
4
2
12
13
ENGLISH
MEMORY/CLOCK ADJ
STOP
.m,/
To add a track to the end of the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until “00” appears on the
display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY/CLOCK ADJ
button.
The track is added to the end of the program.
To clear program
In the stop mode, do either of the following to
clear the program:
< Press OPEN/CLOSE button (L) on top of the unit to
open the CD compartment.
< Press the MEMORY/CLOCK ADJ button and then
the STOP (H) button.
< If the unit is disconnected from the power supply
for more than 3 minutes, the programmed
contents will be cleared.
To cancel the program playback mode
Press the STOP (H) button. “MEMORY” indicator
disappears, but the programmed contents aren’t
lost.
To return to the program mode, press the
MEMORY/CLOCK ADJ button.
To check the programmed order
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly to show the track numbers that
have been stored in memory.
To overwrite the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until the track number to be
changed appears on the display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY/CLOCK ADJ
button.
14
Repeat Playback
Repeat one track
Press the REPEAT/PRESET button once during
playback. The repeat indicator blinks.
The track being played will be played repeatedly. If
you press the SKIP/ SEARCH button and select
another track, the track you select will be played
repeatedly.
It is also possible to select a track to be repeated in
the stop mode. Press the REPEAT/PRESET button
and then select the track number by pressing the
SKIP/SEARCH button. Press the PLAY/PAUSE button
to start playback.
Repeat All the Tracks
All the tracks of the disc will be played repeatedly.
Press the REPEAT/PRESET button twice. The repeat
indicator lights steadily.
< During program playback, only the programmed
tracks will be played in order repeatedly.
< If one of the following buttons is pressed or the CD
compartment is opened, repeat mode will be
canceled:
STOP button (H)
STANDBY/ON switch
FUNCTION button
repeat one track
repeat all the tracks
(off)
Every time the REPEAT/PRESET button is pressed,
the REPEAT indicator lights or blinks, and the mode
is changed as follows :
REPEAT/PRESET
Shuffle Playback
Tracks can be played randomly.
Press the SHUFFLE button in the stop or play mode.
< If you press the SKIP/SEARCH button (
,
/)
during shuffle playback, next track will be randomly
selected and played.
< If you press the SKIP/SEARCH button (.
m
),
the currently played track will be played from the
beginning.
< A track cannot be replayed during shuffle playback.
< To stop shuffle playback, press the STOP button
(H).
< To cancel the shuffle playback mode, press the
SHUFFLE button.
< If one of the following buttons is pressed or the CD
compartment is opened, shuffle mode will be
canceled:
STOP button (H)
STANDBY/ON switch
FUNCTION button
SHUFFLE
ENGLISH
15
Listening to the Radio
1
2
4
3
Press the STANDBY/ON switch to turn the unit
ON.
Press the FUNCTION button to select “TUNER”.
Press the BAND button to select FM or AM.
Select the station you want to listen to (auto
selection).
Press and hold the TUNING button for a second or
more to change frequency display continuously.
When a station is tuned in, the tuning process will
stop automatically.
< Press the TUNING button to stop the auto selection.
4
3
2
1
Selecting stations which cannot be tuned
automatically (manual selection).
Press the TUNING button repeatedly until you find a
receivable station.
If the reception is poor
AM broadcast
Turn around the unit to find the best position for
AM stations.
FM broadcast
For a good reception, turn around the antenna so
that you can get the stations clearly.
< In an area where FM signals are weak, 75-ohm
unbalanced-type FM antenna (3 elements or more)
is recommended.
16
Press the BAND button to select FM or AM.
Press the REPEAT/PRESET button repeatedly
and select a preset channel.
2
1
In each band, up to 10 stations can be stored in preset
memories.
Press the BAND button to select FM or AM.
Operate the TUNING button to tune in a
station to be stored as a preset station.
Press the MEMORY/CLOCK ADJUST button.
Within 10 seconds, select a preset channel to
store the station using the REPEAT/PRESET
button, and then press the MEMORY/CLOCK
ADJUST button.
To store more stations, repeat steps to .
41
4
3
2
1
How to Preset Stations How to select Preset Stations
1
2
4 3 4
1
2
The unit automatically switches from power on to
standby at a specified time.
When the power is on, press the TIMER/SLEEP
button repeatedly until the desired time appears on
the display.
Use the SLEEP button when using the remote
control unit.
The sleep time can be changed at 10-minute
intervals.
ENGLISH
17
Listening to the External Sources Sleep Timer
You can connect external sources such as VCR
deck or TV to the AUX IN jacks.
Press the STANDBY/ON switch to turn the unit
ON.
Press the FUNCTION button repeatedly to
select “AUX”.
2
1
How to connect external sources
< Read instructions of each component you intend to
use with the SR-L35.
1
2
TIMER/SLEEP
When the sleep timer is activated, “SLEEP”
appears on the display.
< To cancel the sleep timer, press the SLEEP button.
(OFF)
90 80 10
70
Connect the component with an RCA pin cable.
< Make sure to connect:
white plug
w
white jack (L: left channel)
red plug
w
red jack (R: right channel)
< Use L-shaped pin plugs for connecting into the AUX
IN jacks if you are using the unit on a table or other
flat surface.
< Be sure to insert each plug securely. To prevent hum
and noise, do not bundle the connection cords with
the power cord.
AUDIO OUT
L
R
white
red
red
white
VCR, TV, etc.
18
Clock Adjustment
Press the DISPLAY button to select clock
display.
“:” blinks in the clock display.
< If the unit is in standby mode, press and hold the
MEMORY/CLOCK ADJUST button for 2 or more
seconds, and continue the procedure from step .
< Press the STOP button to cancel the time setting.
(In the TUNER mode, press the DISPLAY button.)
Within 4 seconds, press and hold the
MEMORY/CLOCK ADJUST button for 2 or more
seconds.
Press the .m or ,/ button to select
“12H” or “24H”.
< In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJUST button.
If you have selected “12H”, “AM” or “PM”
appears on the display.
4
3
2
3
1
Press the .m or ,/ button to set
the current hour.
< In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJUST button.
Press the .m or ,/ button to set
the current minute.
< In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJUST button to
finish the time setting mode.
The clock starts from 00 second.
< If the unit is disconnected from the power supply
for more than 3 minutes, the clock and timer
setting will be reset.
< If the unit is disconnected for less than 3 minutes
the time displayed may not be correct.
8
7
6
5
MEMORY/CLOCK ADJDISPLAY
.m,/
ENGLISH
Adjust the clock before setting the timer.
Setting the timer
Press the DISPLAY button once or twice to
select the timer mode.
The “TIMER” indicator blinks on the display.
Within 4 seconds, press and hold the
MEMORY/CLOCK ADJUST button for 2 or more
seconds.
The “TIMER” and hour blinks on the display.
Press the .m or ,/ button to set
the start time (hour).
In the TUNER mode, use the TUNING button.
3
2
1
Press the MEMORY/CLOCK ADJUST button.
The minute blinks on the display.
Press the .m or ,/ button to set
the start time (minute).
In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJUST button.
Time setting is finished and blinking of the
“TIMER” indicator will stop.
6
5
4
19
MEMORY/CLOCK ADJDISPLAY
.m,/
Timer (1)
To cancel the timer mode
Press and hold the TIMER/SLEEP button until the
“TIMER” indicator disappears from the display.
Activating the timer
Press and hold the TIMER/SLEEP button for 2 or
more seconds until “TIMER” indicator appears on
the display, and press the STANDBY/ON switch to
switch the unit back to standby.
20
Timer (2)
TIMER/SLEEP
The unit will turn on at the specified time every day,
and will return to stanby in one hour from the start
time.
For the timer to start playback of a CD, press the
FUNCTION button to select CD, insert a disc and
adjust the volume before switching the unit from
power on to standby.
For the timer to start the radio, press the FUNCTION
button to select TUNER, tune in a station and adjust
the volume before switching the unit from power
on to standby.
Don’t forget to switch the unit back to
standby, or the timer won’t work.
< If you want to switch the unit back to standby
anytime within 1 hour from the start time, press the
STANDBY/ON switch.
< If the unit is disconnected from the power supply
for more than 3 minutes, the clock and timer
settings will be reset.
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
TEAC Landscape Lighting SR-L35CD Manuel utilisateur
- Catégorie
- Lecteur CD
- Taper
- Manuel utilisateur
dans d''autres langues
Documents connexes
-
TEAC SR-L50 Manuel utilisateur
-
-
-
-
-
-
-
-
-