795-93850 1 of 41 12/15/21
DRUM MOUNTED PARTS CLEANER – SOLVENT
Models DMS332, DMS336, DMD332, DMD336
Operations and Maintenance Instructions
Graymills Corporation
2601 S. 25th Ave., Broadview, IL 60155
www.graymills.com
795-93850 2 of 41 12/15/21
SHIPPING INFO
Unpacking and Inspection
You should inspect your equipment for possible shipping damage.
Thoroughly check the equipment for any damage that might have occurred in transit, such as broken or
loose wiring and components, loose hardware, and mounting screws, etc.
In the Event of Shipping Damage
According to the contract terms and conditions of the Carrier, the responsibility of the Shipper ends at
the time and placement of shipment.
Notify the transportation company’s local agent if you discover damage.
Hold the damaged goods and packing material for the examining agent’s inspection. Do not return any
goods before the transportation company’s inspection and authorization.
File a claim with the transportation company. Substantiate the claim by referring to the agent’s report. A
certified copy of our invoice is available upon request. The original Bill of Lading is attached to our original
invoice. If the shipment was prepaid, write us for a receipted transportation bill.
Advise customer service regarding your wish for assistance and obtain an RMA (return material
authorization) number.
If the Shipment is Not Complete
Check the packing list as back-ordered items are noted on the packing list. You should have:
• Bill of lading
• Packing list
• User’s Manual
Re-inspect the container and packing material to see if you missed any smaller items during unpacking.
If the Shipment is not Correct
If the shipment is not what you ordered, contact the parts and service department immediately. Have the
order number and item number available. Hold the items until you receive shipping instructions.
Returns
Do not return any damaged or incorrect items until you receive shipping instructions from the customer
service department.
795-93850 3 of 41 12/15/21
INTRODUCTION
The Graymills Drum Mount is a degreaser for general maintenance and repair in industrial, automotive,
marine, or farm applications. Standard features include:
Standard Features
• Abrasive-resistant 170 GPH pump
• Reusable nylon filter system removes large particles of dirt and grime to keep fluid clean longer
• Flexible Stay-Put metal flush hose for directable hands-free flushing action
• Metal drain strainer keeps small parts from falling into cleaning solution tank
• 16-gauge minimum welded steel tank leak tested for 24 hours after welding with powder-coat
finish for durability and long-life
• Lift-off sink for easy setup and maintenance, fast cleanup and fluid changes
795-93850 4 of 41 12/15/21
SAFETY WARNINGS / CAUTIONS
Read all the SAFETY INSTRUCTIONS on the machine and those in the manual BEFORE installing
or using this equipment. Keep this manual handy for reference/training.
You will find various types of safety information on the following pages and on the labels attached to
Graymills equipment. The following Safety Statements explain their meaning.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid personal injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which,
if not avoided, could result in minor or moderate injury.
CAUTION, without the safety alert symbol, is used to address practices not related
to personal injury.
Read and understand the user manual before operating this unit.
Do not operate above 100°F (38°C) maximum ambient temperature, near open flames, sparks, or
smoking materials. Keep cover closed when unattended.
To provide continued protection against risk of electrical shock, fire, and explosion, connect to
properly grounded supply or outlets only.
Risk of explosion. This equipment has internal arcing and sparking parts, which shall not be
exposed to flammable vapors. This equipment shall not be located in a recessed floor area or
below grade.
Only cleaning fluids with a flash point at or above 104°F (40°C) shall be used. Refer to user manual
for a list of solvents which have been evaluated for use.
Do NOT contaminate cleaning solution with fluids below 104°F (40°C) flash point including
gasoline, alcohol, or other flammable liquids. Even small amounts will create a hazardous
condition.
Ensure fusible link and closing device are in proper working order. Fusible link melts at
165°F(74°C) causing lid to close. When open the lid must lean forward so it will close automatically
when link melts. Do NOT tamper with or remove the fusible safety link. If the safety link breaks or
is lost, do NOT use the unit. Replace the safety link immediately.
Hazardous voltage present. Disconnect power before repairing or cleaning. Unit must be properly
grounded to prevent electric shock, fire, and explosion hazard. Connect only to three prong outlets.
Should cord become cracked, frayed, or damaged in any way, it should be repaired immediately
by a qualified electrician. Never use an extension cord. Since operator safety at all times is a
priority, we strongly recommend that, whether or not required by local code, this equipment be
connected only into a power supply equipped with a “Ground Fault Interrupter” (GFI). All electrical
connections should conform to national/local codes and be made by qualified personnel.
Do not leave objects in the tank or let hose attachments exit the tank which prevent lid from closing
completely in the event of fire.
795-93850 5 of 41 12/15/21
Do not operate below minimum liquid level marking. Low liquid level may result in motor failure,
creating a potential fire hazard. Fill tank to recommended operating capacity range before plugging
in power cord Do not operate with tank empty.
Operator shall wear appropriate PPE (personal protective equipment). Refer to cleaning fluid SDS
(safety data sheet) for details. If any cleaning solutions are splashed on clothing, remove wet
clothing promptly and thoroughly wash body areas that have been in contact with the solution. Do
NOT permit saturated clothing to remain in contact with skin. Cleaning solutions may irritate skin
and eyes. If splashed in eyes, flush thoroughly with water. Consult Safety Data Sheet (SDS) and a
physician. Always wear appropriate safety items such as gloves, apron, safety glasses or goggles.
Floor may be slippery when wet, do not splash fluids out of tank.
Use with solvent cleaning fluids only. The use of aqueous based (water) cleaning fluids will damage
the finish and cause rusting.
Install unit on level surface. Do not overload tank floor, shelf, or trays. Load items evenly, do not
allow items to overhang outside tank.
Never work with equipment you feel may be unsafe. Contact your supervisor immediately if you
feel a piece of equipment is in an unsafe condition.
Install unit on level surface. Do not overload tank floor, shelf, or trays. Load items evenly, do not
allow items to overhang outside tank. Maximum load capacity is 100 lbs. Placing parts at one end
of tank can cause unit to become unbalanced and tip over.
Do NOT plug tank drain and fill. This also can cause unit to become unstable and possibly tip over.
Weight of liquid in drum affects stability. Keep filled to proper level.
795-93850 6 of 41 12/15/21
SPECIFICATIONS AND DIMENSIONS
Depending on the model, the Drum Mount parts cleaner operates at either 115V or 230V. To determine
the electrical requirements of your model, check the nameplate located on the side of the tank near the
motor. An “A” designation after the model number indicates it operates at 115V, 60 Hz, 1 ph. A “B”
following the model number means the unit is rated at 230V, 60 Hz, 1 ph.
The Drum Mount is designed to be used with combustible (flash point over 104°F) petroleum-based
cleaning fluids such as Regular Agitene® 141 or Super Agitene® 141. Super Agitene® 141 has a mild,
fresh odor and is far superior in cleaning ability than normal safety solvents. Super Agitene® 141 also
contains "HandEase," a lanolin formulation that helps prevent skin irritation, plus seven other ingredients
that make it a unique cleaning fluid that cleans faster, more easily and lasts longer than other cleaning
fluids. Super Agitene® 141 also leaves a light rust retarding film. Regular Agitene® 141 is a fast-drying,
film-free cleaner which contains Tergene, a detergent additive for better cleaning efficiency. It is especially
recommended for cleaning electrical parts since it will not harm varnish and parts to be painted.
MODEL
A
B
C
D
E
F
G
MAX
MIN
DMS332
34.5''
20.3''
56.7''
32''
17.8''
8''
37''
10
GAL
5
GAL
DMD332
65.4''
DMS336
38.5''
22.3''
60.4''
36''
19.8''
39''
20
GAL
10
GAL
DMD336
67.2''
795-93850 7 of 41 12/15/21
INSTALLATION AND OPERATION
The work area should be well ventilated.
Provide adequate lighting in the work area to allow observation of the cleaning process and the floor
area around the machine. Be sure to allow adequate room to bring work to and from the machine. Provide
sufficient clearance around the machine for fluid changeovers and servicing.
Site Preparation
Before installing, careful consideration should be given to the place of operation. Place unit on a smooth,
level surface. To the extent possible avoid installing machine in areas subject to high forklift traffic.
Reasonable precautions shall be taken to avoid damaging or puncturing the drum and tank walls.
Installation Procedure
All Models:
• After removing from shipping carton place drum upright with open end facing up.
• Place cleaning tank of top of drum. Mounting ring on sink bottom should insert easily into drum
and fully seat onto four mounting brackets. If the sink does not fit into drum check drum for
damage or out of roundness. If the sink cannot be made to seat fully into the drum do not use
the machine.
• Plug pump power cord into back of electric box.
• Raise tank cover and place link rod (Figure 2(B)) into fusible link (Figure 2(Q)) on cover. This link
is designed to melt at 165°F in case of fire. This eliminates the upper support and allows the
cover, which is held by the link rod in a slightly forward position (be sure this slightly forward
position is maintained), to drop shut. Do NOT allow any parts to remain in the parts washer that
would prevent the lid from closing. The fusible link and/or the link rod should be replaced any time
it is damaged and no longer holds the lid open.
• Slip cloth filter bag onto drain cover. Position drain cover with filter bag in tank drain opening.
• Fill with appropriate cleaning fluid
• Insert 3-prong plug into a properly grounded compatible outlet.
DMD Models Only:
• Position light (Figure 2(H)) on rear of cleaning tank. Lift lock ring and lower light onto bracket post.
Release lock ring and check that light is secure on tank.
• Lower pump (Figure 2(D)) into drum by releasing the cable from bracket on right end of tank and
allow the pump to slowly pull cable into opening at left end of tank (Figure 3).
• Plug light power cord into back of electric box.
Unit is now ready for use.
795-93850 8 of 41 12/15/21
FIGURE 2
ITEM
DESCRIPTION
A
LID STOP CABLE ASSY.
B
LINK ROD/LID SUPPORT
C
TRUARC RETAINING RING 1/4 DIA.
D
SUBMSBLE.PUMP 1/125HP,115/1/60,1/4",COMPLETE
E
FILTER BAG
F
SLEEVE 5/16OD X 1/4ID X 5/16LG
G
FLAT WASHER 5/16 ID
H
LAMP DM132/136,RIGID MT.,W/CONNECT.
J
FLEX HOSE 1/4" NPT Stl. 24"
K
DM132/136 DRAIN COVER 4"HOLE
L
NUT HEX 1/4-20 NC
M
FLAT WASHER, .265 ID x .625 OD x 0.050" 302S
N
HANDLE, T-BAR-PLASTIC
O
SWITCH,RKR,SPDT,16A,BLK,I/O-RED
P
C/S, HEX HD,L/W 1/4-20 X 3/4
Q
FUSE LINK ASSY. SOLDERED(TYPE K)
R
DM132/136 CABLE ASSY.1/4-20NC
S
HOSE,NEO.,1/2ID X 3/4OD,19"LG.
795-93850 9 of 41 12/15/21
Drum Mount Pump
The pump (FIGURE 2(D)) is a valuable aid in parts cleaning. It is particularly useful for flushing away
softened grease and grime as you brush the parts. The pumps designed for the Drum Mount models
operate at low pressure to aid against splash. These pumps are made of high strength, reinforced
thermoplastic. The pump screen which protects the pump intake may need periodic cleaning.
• Never work with equipment you feel may be unsafe. Contact your supervisor immediately if you
feel a piece of equipment is in an unsafe condition.
• Fill tank with Graymills Regular Agitene® 141/Super Agitene® 141 or comparable cleaning fluid
with a flash point of 104°F (40°C) or higher. Drum must contain enough fluid to submerge the
pump (FIGURE 2(D)) but should not be filled above top drum bead.
• Insert plug into a properly grounded compatible outlet.
• This machine contains a flexible hose (FIGURE 2(J)) capable of splashing solvent and/or ejecting
it from the machine. The hose must be directed into the tank at all times and eye protection worn
while operating the equipment.
• Turn on rocker switch on right side of tank to start fluid recirculating.
When DMS tank is removed from reservoir, care must be taken not to damage pump. Lift tank straight
up and lay upside down.
The light (DMD only) has a switch located on top making it possible to operate pump with light off.
FIG.
3
795-93850 10 of 41 12/15/21
MAINTENANCE
Cleaning
Inspect pump, fusible link, and all electrical cords and plugs each time unit is cleaned. Do NOT use if any
wear or damage is noticed until impaired components are repaired or replaced.
Fill drum to recommended operating capacity range before plugging in power cord. (See INSTALLATION
AND OPERATION section).
To maximize fluid life and increase efficiency of the unit, the unit should be cleaned regularly. It is
recommended that the unit’s metal strainer and cloth filter bag located at the bottom center of the tank
be removed and cleaned daily for optimum filtration of contaminants and lengthened fluid life.
Changing Fluid
When it is determined that the cleaning fluid is no longer usable, remove the tank from the drum, dispose
of the contents in accordance with local regulations, wipe out drum and refill with fresh cleaning fluid. To
avoid buildup of sludge and grime, periodically wipe out tank.
Always dispose of used cleaning fluid properly. Refer to the cleaning chemical manufacturer’s package
label and solvent MSDS for instructions.
DMD Models Only
• The pump supplied with this parts cleaner is retractable to protect it as well as to facilitate fluid
changeovers.
• Raise pump by pulling cable straight out as far as it will go. Be sure to pull the cable straight out
of the hole in order to avoid scraping cable against sleeve opening (see Figure 3). Repeated
scraping will cause cable to fray and weaken.
• Swing the cable over to opposite end of tank and insert into holding bracket. This will secure pump
into circular ring. Pump DOES NOT hang down, and therefore lift is much less.
Wiring Schematic
795-93850 11 of 41 12/15/21
TROUBLESHOOTING GUIDE
CONDITION
POSSIBLE CAUSE
CORRECTION
Pump
Pump does not run
Machine is unplugged
Plug machine into outlet
Pump is not plugged into
electrical box
Plug pump into electrical box
Circuit breaker is tripped
Check breaker and correct. If
problems persist, contact Graymills.
Pump motor is burned out
Replace pump
Faulty switch
Replace switch
Pump runs but does not
pump fluid
Pump filter screen is clogged
Clear debris from around pump
Flexible metal hose is clogged
Clear debris from hose
Pump runs but is noisy
(Some noise is normal).
Cavitation due to low liquid
level
Raise liquid level to correct level
Optional light
Light does not turn on
Machine is unplugged
Plug machine into outlet
Light is not plugged into
electrical box
Plug lamp into electrical box
Circuit breaker is tripped
Check breaker and correct. If
problems persist, contact Graymills.
Bulb is burned out
Replace bulb
Faulty switch (on lamp)
Replace lamp
REPLACEMENT PARTS
DESCRIPTION
GRAYMILLS P/N
DRAWING
Cover Stop Cable
765-93718
FIGURE 2(A)
Lid Support Rod
567-26793-65
FIGURE 2(B)
Fusible Link 165°F
740-93713
FIGURE 2(Q)
Rocker Switch
770-93609
FIGURE 2(O)
Drain Cover Assembly
742-07625
FIGURE 2(K)
Pump 1/125 HP
390-06940(-A model)
FIGURE 2(D)
Pump 1/150 HP
390-09800(-B model)
Flexible Metal Hose
728-27602
FIGURE 2(J)
Neoprene Hose 19"
729-08959
FIGURE 2(S)
Filter Bag
742-07657
FIGURE 2(E)
Pump Cable Assembly
765-29196
FIGURE 2(R)
Plastic “T” Handle
766-07640
FIGURE 2(N)
Lamp (DMD Models Only)
772-07645
FIGURE 2(H)
795-93850 12 of 41 12/15/21
ACCESSORIES
Graymills manufactures a wide variety of parts cleaning supplies and accessories for use with your Clean-
O-Matic. Contact your Graymills Jobber or Distributor for more information on the items listed below.
Parts Cleaning Brushes
Graymills parts cleaning brushes are specifically designed for tough parts cleaning work. The crimped
nylon fibers outwear ordinary brushes and won't ball up, flare out, or get flabby.
3B-G Standard Nylon Brush — 2-1/2” nylon bristles for maximum durability.
5D Double Brush — 2-1/2” nylon bristle brush for broad cleaning at one end of the tapered handle
and a 1-1/2” fine brush at the other.
6A Flow-Thru Brush – flushes parts as they are cleaned. Solvent flows through the core of the handle.
Manufactured with a 2’ connecting hose, 2·1/2” nylon bristles, and a rubber connector which slips
over the nozzle of the flexible metal hose.
7A Flat Angular Flow-Thru cleaning brush with polyester bristles; can attach to pump nozzle with
included hose. Plastic Handle.
8A Round Angular handle cleaning brush with polyester bristles; can attach to pump nozzle with
included hose. Plastic handle.
Baskets
There are several parts baskets available:
L-3 Permits flushing of small parts while keeping them organized. It measures 10” in diameter.
L-7 Ideal for small parts, the versatile basket is 8” L x 4” W x 6” H and hooks over the edge of any
Handi-Kleen unit or stands on legs.
L-8 Constructed of expanded metal on sides and bottom to accommodate big parts for thorough
soaking, the basket measures 13” L x 12” W x 5” H.
Drum Liners
C-27452 Fits 16-gallon drums (232 Model)
C-27484 Fits 30-gallon drums (236 Model)
Solvent Savers
Oil and Grease Removal (Packed two/carton)
SS-11 7" diameter x 11" long–includes one connecting hose
SS-18 7" diameter x 18" long–includes one connecting hose
Oil and Grease Plus Particulate Removal (Packed two/carton) In addition to special absorbent materials,
it contains a 5-micron filter cartridge that filters particulate from the solvent prior to oil and grease
absorbing stage.
SSC-11 7" diameter x 11" long–includes one connecting hose
SSC-18 7" diameter x 18" long-includes one connecting hose
Solvent Saver Hanging Bracket-Stainless Steel bracket holds filter out of way on inside of parts washer.
SS-BRAC 12" long x 9" deep X 8" high
795-93850 13 of 41 12/15/21
WARRANTY INFORMATION
Graymills Corporation warrants that the equipment manufactured and delivered, when properly
installed and maintained, shall be free from defects in workmanship and will function as quoted in the
published specification. Graymills does not warrant process performance, nor assume any liability for
equipment selection, adaptation, or installation.
Warranty does not apply to damages or defects caused by shipping, operator carelessness, misuse,
improper application or installation, abnormal use, use of add-on-parts or equipment which damages or
impairs the proper function of the unit, and modifications made to the unit. Warranty does not apply to
expendable parts needing replacement periodically due to normal wear and tear.
A new Warranty period shall not be established for repaired or replaced materials or products. Such items
shall remain under Warranty for only the remainder of the Warranty period of the original material or
product.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL,
WRITTEN, EXPRESSED, IMPLIED OR STATUTORY. GRAYMILLS CORPORATION MAKES NO
OTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE
AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY GRAYMILLS CORPORATION AND
EXCLUDED FROM THIS SALE. Graymills warranty obligations and Buyer remedies (except to title), are
solely and exclusively stated herein. In no case will Graymills be liable for consequential damages, loss
of production, or any other loss incurred due to interruption of service.
Graymills' obligation under this Warranty shall be limited to:
1. Repairing or replacing (at Graymills sole discretion) any non-conforming or defective component
within one year from the date of shipment from Graymills.
2. Repairing or replacing (at Graymills sole discretion), components supplied by, but not
manufactured by Graymills, to the extent of the warranty given by the original manufacturer.
3. This warranty does not cover rusting of a mild-steel parts cleaner used with aqueous (water-
based) materials. Buyer must give Graymills prompt notice of any defect or failure.
Buyer must give Graymills prompt notice of any defect or failure.
If you believe you have a Warranty claim, contact Graymills at (773) 477-4100. Any return material must
have an RMA number on the outside of the package and shipping prepaid or shipment will be refused.
Graymills will promptly examine the material and determine if it is defective and within the Warranty
period.
795-93850 14 of 41 12/15/21
This page intentionally left blank.
795-93850 15 of 41 12/15/21
LIMPIADOR DE PIEZAS MONTADO EN TAMBOR –
SOLVENTE
Modelos DMS332, DMS336, DMD332, DMD336
Instrucciones de operación y mantenimiento
Graymills Corporation
2601 S. 25th Ave., Broadview, IL 60155
www.graymills.com
795-93850 16 of 41 12/15/21
INFORMACIÓN DE ENVÍO
Desempacado e inspección
Debe inspeccionar su equipo por posibles daños durante el envío.
Revise minuciosamente el equipo para detectar cualquier daño que pueda haber ocurrido durante el
transporte, por ejemplo, componentes y cables sueltos o rotos, herrajes o tornillos de montaje sueltos,
etc.
En caso de daños durante el envío
De conformidad con los términos y condiciones de contrato del transportista, la responsabilidad del
expedidor termina al momento de hacer el envío.
En caso de que encuentre daños, notifique al agente local de la empresa transportista.
Guarde la mercancía dañada y el material de empaque para que el agente de revisión lo inspeccione.
No devuelva ninguna mercancía antes de la inspección y autorización por parte de la empresa
transportista.
Presente un reclamo ante la empresa transportista. Fundamente el reclamo haciendo referencia al
reporte del agente. Tiene disponible una copia certificada de su factura cuando usted la solicite. La hoja
de envío original está adjunta a nuestra factura original. Si el envío fue prepagado, contáctenos para
obtener el recibo de transporte.
Avise a servicio al cliente en caso de que desee recibir asistencia y obtener un número de autorización
de devolución de material (RMA, por sus siglas en inglés).
Si el envío no está completo
Revise el manifiesto de carga, ya que los artículos que se envían sobre pedido están indicados en el
manifiesto de carga. Usted debe tener lo siguiente:
• Hoja de envío
• Manifiesto de carga
• Manual del usuario
Vuelva a inspeccionar el contenedor y material de empaque para verificar que no haya pasado por alto
ningún artículo pequeño durante el desempaque.
Si el envío no es correcto
Si el envío que recibió no está de acuerdo con lo que usted pidió, comuníquese con el departamento de
piezas y servicio inmediatamente. Tenga el número de pedido y el número de artículo a la mano. Guarde
los artículos hasta que reciba instrucciones para su envío.
Devoluciones
No devuelva ningún artículo dañado o incorrecto hasta que reciba instrucciones para el envío de
devolución por parte del departamento de servicio al cliente.
795-93850 17 of 41 12/15/21
INTRODUCCIÓN
El Drum Mount de Graymills es un desengrasador para tareas generales de mantenimiento y reparación
en aplicaciones industriales, automotrices, marinas o agrícolas. Las características estándar incluyen:
Características estándar
• Bomba de 170 GPH (galones por hora) resistente a la abrasión
• Sistema filtrante de nailon reutilizable que elimina las partículas grandes de tierra y suciedad para
mantener el líquido limpio por más tiempo
• Manguera de enjuague metálica flexible de puesta fija para enjuague dirigido a manos libres
• Cedazo de drenado metálico que evita que las partículas pequeñas caigan al depósito de la
solución de limpieza
• Depósito de acero con calibre 16 como mínimo y probado durante 24 horas después de soldarse
como resistente a las fugas, con acabado de revestimiento en polvo para larga vida y durabilidad
• Lavabo extraíble para facilitar el montaje y las tareas de mantenimiento, limpieza y cambios de
líquido
795-93850 18 of 41 12/15/21
ADVERTENCIAS / PRECAUCIONES DE SEGURIDAD
ANTES de instalar o usar este equipo, lea todas las INSTRUCCIONES DE SEGURIDAD que vienen
en la máquina y en el manual. Mantenga este manual a la mano para referencia o capacitación.
Encontrará diferentes tipos de información sobre seguridad en las páginas siguientes y en las etiquetas
adheridas a los equipos Graymills. Las siguientes Declaraciones de seguridad explican su significado.
Este es el símbolo de alerta de seguridad. Se utiliza para ponerlo en alerta sobre posibles
riesgos de lesiones personales. Obedezca todas las indicaciones de seguridad que siguen a
este símbolo para evitar lesiones personales o la muerte.
PELIGRO significa que existe una situación de riesgo que, si no la evita, causará
lesiones graves o la muerte.
ADVERTENCIA significa que existe una situación de riesgo que, si no la evita,
podría causar lesiones graves o la muerte.
PRECAUCIÓN, utilizada junto con el símbolo de alerta de seguridad, significa que
existe una situación de riesgo que, si no la evita, podría causar lesiones menores a
moderadas.
PRECAUCIÓN, sin el símbolo de alerta de seguridad, se utiliza para indicar
prácticas que no están relacionadas con lesiones personales.
Antes de operar esta unidad lea y entienda el manual del usuario.
No opere la unidad cuando la temperatura ambiente máxima sea mayor que 100 °F (38 °C) ni
cerca de llamas, chispas o materiales humeantes. Mantenga la tapa cerrada cuando no esté en
uso.
Para mantener la protección continua contra riesgos de descarga eléctrica, incendio y explosión,
conecte la unidad a tomacorrientes o fuentes de alimentación conectadas a tierra correctamente.
Riesgo de explosión. Este equipo contiene piezas que generan arco eléctrico y chispas internas,
los cuales no deben exponerse a vapores inflamables. Este equipo no debe ubicarse en piso
desnivelado o por debajo del nivel del suelo.
Use únicamente líquidos limpiadores con punto de ignición mayor a 104 °F (40 °C). Consulte el
manual del usuario para ver la lista de solventes que ya fueron evaluados para su uso.
NO contamine la solución limpiadora con líquidos cuyo punto de ignición sea menor a 104 °F (40
°C), incluidos gasolina, alcohol u otros líquidos inflamables. Incluso pequeñas cantidades
generarán condiciones peligrosas.
Asegúrese de que el eslabón fusible y el dispositivo de cierre funcionen correctamente. El eslabón
fusible se funde a 165 °F (74 °C), lo cual causa que la tapa se cierre. Cuando está abierta, la tapa
debe inclinarse hacia adelante de modo que se cierre automáticamente cuando se funde el fusible.
NO manipule ni desmonte el eslabón fusible de seguridad. Si el eslabón fusible se rompe o se
pierde, NO use la unidad. Reemplace el eslabón fusible inmediatamente.
El nivel de voltaje presente es peligroso. Desconecte la alimentación eléctrica antes de realizar
cualquier reparación o limpieza del equipo. La unidad debe estar conectada a tierra correctamente
para prevenir riesgos de descarga eléctrica, incendio y explosión. Conecte la unidad únicamente
a tomacorrientes de tres clavijas. En caso de que el cable se agriete, deshilache o dañe de alguna
manera, debe ser reparado inmediatamente por un técnico electricista calificado. Nunca utilice
cables de extensión. Debido a que la seguridad del operador es una prioridad en todo momento,
recomendamos con firmeza que, más allá de que sea requerido o no por los reglamentos locales,
este equipo se conecte únicamente a una fuente de alimentación equipada con un "Interruptor de
795-93850 19 of 41 12/15/21
circuito por falla a tierra" (GFI, por sus siglas en inglés). Todas las conexiones eléctricas deben ser
realizadas por personal calificado de conformidad con las normas locales y nacionales.
No deje objetos en el depósito ni deje los accesorios de la manguera sobresaliendo por fuera del
depósito, ya que de este modo evitarán que la tapa cierre completamente en caso de incendio.
No opere la unidad cuando el líquido esté por debajo de la marca de nivel mínimo de líquido. El
bajo nivel de líquido puede causar la falla del motor y posible riesgo de incendio. Antes de conectar
el cable de alimentación llene el depósito de acuerdo al rango de capacidad operativa
recomendado. No opere la unidad con el depósito vacío.
El operador debe usar equipo de protección personal (EPP) adecuado. Consulte las hojas de
seguridad (SDS, por sus siglas en inglés) del líquido limpiador para más detalles. En caso de que
se salpiquen soluciones de limpieza en la ropa, quítese la ropa mojada inmediatamente y lave bien
las áreas del cuerpo que hayan tenido contacto con la solución. NO permita que la ropa empapada
permanezca en contacto con la piel. Las soluciones limpiadoras pueden irritar la piel y los ojos. Si
se salpican los ojos, enjuague minuciosamente con agua. Consulte la Hoja de datos de seguridad
(SDS, por sus siglas en inglés) y consulte a un médico. Siempre use artículos de seguridad
adecuados como guantes, batas, gafas o lentes de seguridad.
El piso puede estar resbaloso cuando está mojado, no salpique líquidos fuera del depósito.
Use la unidad únicamente con líquidos de limpieza solventes. El uso de líquidos de limpieza
acuosos (hechos a base de agua) daña el acabado y causa oxidación.
Instale la unidad a nivel de superficie. No sobrecargue el piso del depósito, el estante ni las
bandejas. Cargue los artículos de manera uniforme, no permita que los artículos cuelguen por
fuera del depósito.
Nunca trabaje con equipos que sienta que no son seguros. Contacte a su supervisor
inmediatamente en caso de que sienta que el equipo no está en condiciones de uso seguras.
Instale la unidad a nivel de superficie. No sobrecargue el piso del depósito, el estante ni las
bandejas. Cargue los artículos de manera uniforme, no permita que los artículos cuelguen por
fuera del depósito. Capacidad de carga máxima de 100 libras Si coloca las piezas en un extremo
del depósito puede causar que la unidad pierda el equilibrio y se vuelque.
NO taponar el drenado del depósito para llenarlo. Esto también puede causar que la unidad se
desestabilice y probablemente se vuelque.
El peso del líquido en el tambor afecta su estabilidad. Mantenga el tambor lleno hasta un nivel
adecuado.
795-93850 20 of 41 12/15/21
ESPECIFICACIONES Y DIMENSIONES
Dependiendo del modelo, el limpiador de piezas Drum Mount opera a 115 V o 230 V. Para determinar
los requerimientos eléctricos de su modelo, revise la placa de datos localizada a un lado del depósito
cerca del motor. La designación "A" después del número de modelo indica que opera a 115 V, 60 Hz y
1 ph. La "B" después del número de modelo significa que la unidad está clasificada para 230 V, 60 Hz y
1 ph.
El Handi-Kleen está diseñado para utilizarse con líquidos limpiadores combustibles (punto de ignición a
más de 104 °F (40 °C)) hechos a base de petróleo como Regular Agitene® 141 o Super Agitene® 141.
El Super Agitene® 141 tiene un olor fresco y leve y es muy superior en capacidad de limpieza a los
solventes de seguridad comunes. El Super Agitene® 141 también contiene "HandEase", una formulación
de lanolina que ayuda a prevenir la irritación de la piel, además de otros siete ingredientes que lo hacen
único ya que limpia más rápido y más fácilmente, y dura mucho más tiempo que otros líquidos
limpiadores. El Super Agitene® 141 también deja una ligera capa que retarda la oxidación. Regular
Agitene® 141 es un limpiador de secado rápido que no deja capas y que contiene Tergene, un aditivo
detergente que mejora la eficacia de limpieza. Se recomienda especialmente para limpiar piezas
eléctricas ya que no daña el barniz ni las piezas que van a ser pintadas.
MODELO
A
B
C
D
E
F
G
MÁX
MÍN
DMS332
34.5''
20.3''
56.7''
32''
17.8''
8''
37''
10
GAL
5
GAL
DMD332
65.4''
DMS336
38.5''
22.3''
60.4''
36''
19.8''
39''
20
GAL
10
GAL
DMD336
67.2''
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
Graymills DMD332 Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
- Ce manuel convient également à
dans d''autres langues
- English: Graymills DMD332 Owner's manual
- español: Graymills DMD332 El manual del propietario
Documents connexes
-
Graymills CLEAN-O-MATIC COM804 Le manuel du propriétaire
-
-
-
-
-
-
