Tascam 24 Le manuel du propriétaire

ENGLISH

FRANÇAIS

ESPAÑOL

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

042862304

Model 24

Multitrack Live Recording Console

2 TASCAM Model 24

• TASCAM is a registered trademark of TEAC Corporation.

• SDXC Logo is a trademark of SD-3C, LLC.

• The Bluetooth® word mark and logo are the property of

Bluetooth SIG, Inc. and are used by TEAC Corporation with

permission.

• Microsoft, Windows and Windows Vista are either registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• Apple, Mac, macOS, iPad, iPadOS and iTunes are trademarks of

Apple Inc. in the United States and other countries.

• Lightning is a trademark of Apple Inc.

• App Store is a service mark of Apple Inc.

• IOS is a trademark or registered trademark of Cisco in the U.S.

and other countries and is used under license.

• ASIO is a trademark of Steinberg Media Technologies GmbH.

• Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

Information is given about products in this manual only

for the purpose of example and does not indicate any

guarantees against infringements of third-party intel-

lectual property rights and other rights related to them.

TEAC Corporation will bear no responsibility for infringe-

ments on third-party intellectual property rights or their

occurrence because of the use of these products.

With the exception of personal enjoyment and similar

uses, copyrighted materials belonging to third parties

cannot be used without permission from the rights

holders in accordance with copyright law. Please use the

equipment appropriately.

TEAC Corporation will bear no responsibility for rights

infringements committed by users of this product.

TASCAM Model 24 3

E

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For U.S.A.

Declaration of Conformity

Model Number: Model 24

Trade Name: TASCAM

Responsible party: TEAC AMERICA, INC.

Address: 10410 Pioneer Blvd. Suite #1, Santa Fe Springs,

California 90670, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

INFORMATION TO THE USER

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential instal-

lation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician for

help.

CAUTION

Changes or modifications to this equipment not expressly

approved by TEAC CORPORATION for compliance could void

the user’s authority to operate this equipment.

IN USA/CANADA, USE ONLY ON 120 V SUPPLY.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN

ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A

LA NORME NMB-003 DU CANADA.

This product complies with the European

Directives request and the other Commission

Regulations.

IMPORTANT SAFETY INSTRUCTIONS

4 TASCAM Model 24

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing

isrequired when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

• The apparatus draws nominal non-operating power from the

AC outlet with its POWER or STANDBY/ON switch not in the

ON position.

• The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

• Caution should be taken when using earphones or

headphones with the product because excessive sound

pressure (volume) from earphones or headphones can cause

hearing loss.

• If you are experiencing problems with this product, contact

TEAC for a service referral. Do not use the product until it has

been repaired.

CAUTION

• Do not expose this apparatus to drips or splashes.

• Do not place any objects filled with liquids, such as vases,

on the apparatus.

• Do not install this apparatus in a confined space such as a

book case or similar unit.

• The apparatus should be located close enough to the AC

outlet so that you can easily grasp the power cord plug at

any time.

• If the product uses batteries (including a battery pack

or installed batteries), they should not be exposed to

sunshine, fire or excessive heat.

• CAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace only

with the same or equivalent type.

WARNING

• Products with Class ! construction are equipped with a

power supply cord that has a grounding plug. The cord of

such a product must be plugged into an AC outlet that has

a protective grounding connection.

WARNING

• To prevent possible hearing damage, do not listen

at high volume levels for long periods.

IMPORTANT SAFETY INSTRUCTIONS

TASCAM Model 24 5

E

IMPORTANT SAFETY INSTRUCTIONS

For European Customers

Disposal of electrical and electronic equipment and

batteries and/or accumulators

(a) All electrical/electronic equipment and waste batteries/

accumulators should be disposed of separately from the

municipal waste stream via collection facilities designated

by the government or local authorities.

(b) By disposing of electrical/electronic equipment and waste

batteries/accumulators correctly, you will help save valuable

resources and prevent any potential negative effects on

human health and the environment.

(c) Improper disposal of waste electrical/electronic equipment

and batteries/accumulators can have serious effects on the

environment and human health because of the presence of

hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment

(WEEE) symbols, which show wheeled bins that have

been crossed out, indicate that electrical/electronic

equipment and batteries/accumulators must be collected

and disposed of separately from household waste.

If a battery or accumulator contains more than the

specified values of lead (Pb), mercury (Hg), and/or

cadmium (Cd) as defined in the Battery Directive

(2006/66/EC, 2013/56/EU), then the chemical

symbols for those elements will be indicated beneath the

WEEE symbol.

(e) Return and collection systems are available to end users.

For more detailed information about the disposal of old

electrical/electronic equipment and waste batteries/

accumulators, please contact your city office, waste disposal

service or the shop where you purchased the equipment.

Pb, Hg, Cd

For China

“仅适用于海拔2000m以下地区安全使用”

“仅适用于非熱帯气候条件下安全使用”

“環境保護使用年限”

产品有毒有害物质或元素的名称及含量

机种: Model 24 有毒有害物质或元素

品名铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

1 CHASSIS部份 ○ ○ ○ ○ ○ ○

2 FRONT PANEL部份 ○ ○ ○ ○ ○ ○

3 螺丝部份 ○ ○ ○ ○ ○ ○

4 线材部份 ○ ○ ○ ○ ○ ○

5 PCB Assy部份 × ○ ○ ○ ○ ○

6 电源部份 ○ ○ ○ ○ ○ ○

7 附属品部份 × ○ ○ ○ ○ ○

8 LABEL部份 ○ ○ ○ ○ ○ ○

9 包装部份 ○ ○ ○ ○ ○ ○

○：表示该有毒有害物质在该部件所有均质材料中的含有量均在 GB/T26572 标准规定的限量要求以下。

×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572标准规定的限量要求。

（针对现在代替技术困难的电子部品及合金中的铅)

6 TASCAM Model 24

Wireless equipment precautions

Compliance of radio transmitter and in-

terference

This product has the function of broadband transmitter using

2.4GHz Band.

Use frequency range: 2400 MHz – 2480 MHz

Maximum output power: Bluetooth® Class 2 (less than 2.5 mW)

Please use only in the country where you purchased the

product. Depending on the country, restrictions on the use of

Bluetooth wireless technology might exist.

Model for USA

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 10410 Pioneer Blvd. Suite #1, Santa Fe

Springs, California 90670, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part.15 of FCC Rules. Operation is

subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

Labeling of authorization

FCC ID: XEG-MODEL24

Model for Canada

Compliance of radio transmitter

This device complies with Industry Canada’s licence-exempt

RSSs.

Operation is subject to the following two conditions:

1) This device may not cause interference

2) This device must accept any interference, including inter-

ference that may cause undesired operation of the device.

Labeling of authorization

IC: 1559C-MODEL24

Model for EEA (European Economic Area)

Hereby, TEAC Corporation declares that the

radio equipment type is in compliance with

Directive 2014/53/EU., and the other Directives,

and Commission Regulations.

The full text of the EU declaration of conformity is available at

the following internet address: Please contact us by e-mail.

https://www.tascam.eu/en/kontakt.html

EU Importer: TEAC Europe GmbH

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

Radiation Exposure requirements

This equipment meets the regulation, which is recognized

internationally, for the case of human exposure to radio waves

generated by the transmitter.

Statement of compliance

Model for USA

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment and meets the FCC radio

frequency Exposure Guidelines.

Model for Canada

This equipment complies with IC RSS-102 radiation exposure

limits set forth for an uncontrolled environment.

Model for USA/Canada

This Class B digital apparatus complies with Canadian ICES-003.

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-102

of the IC radio frequency (RF) Exposure rules. This equipment

has very low levels of RF energy that it deemed to comply

without maximum permissive exposure evaluation (MPE). But

it is desirable that it should be installed and operated keeping

the radiator at least 20 cm or more away from person’s body

(excluding extremities: hands, wrists, feet and ankles).

Model for EEA (European Economic Area)

This equipment complies with EN.62311; Assessment of

electronic and electrical equipment related to human exposure

restrictions for electromagnetic fields; the harmonised standard

of DIRECTIVE 2014/53/EU.

TASCAM Model 24 7

F

Ce produit est conforme aux impératifs des

directives européennes et autres règlements de

la Commission.

ATTENTION: POUR RÉDUIRE LE RISQUE D'ÉLECTROCUTION, NE RETIREZ PAS LE CAPOT (OU

L'ARRIÈRE). AUCUNE PIÈCE INTERNE N'EST RÉPARABLE PAR L'UTILISATEUR. CONFIEZ TOUTE

RÉPARATION À UN SERVICE APRÈS-VENTE QUALIFIÉ.

Le symbole d'éclair à tête de flèche dans un triangle équilatéral sert à prévenir l'utilisateur de

la présence dans l'enceinte du produit d'une «tension dangereuse» non isolée d'une grandeur

suffisante pour constituer un risque d'électrocution pour les personnes.

Le point d'exclamation dans un triangle équilatéral sert à prévenir l'utilisateur de la présence

d'instructions importantes de fonctionnement et de maintenance (entretien) dans les

documents accompagnant l'appareil.

AVERTISSEMENT: POUR PRÉVENIR LES RISQUES

D'INCENDIE ET D'ÉLECTROCUTION, N'EXPOSEZ PAS CET

APPAREIL À LA PLUIE NI À L'HUMIDITÉ.

AUX USA/CANADA, UTILISEZ UNIQUEMENT UNE TENSION

D'ALIMENTATION DE 120V.

Pour le Canada

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À

LA NORME NMB-003 DU CANADA.

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

8 TASCAM Model 24

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Tenez compte de tous les avertissements.

4. Suivez toutes les instructions.

5. N'utilisez pas cet appareil avec de l'eau à proximité.

6. Nettoyez-le uniquement avec un chiffon sec.

7. Ne bloquez aucune ouverture de ventilation. Installez-le

conformément aux instructions du fabricant.

8. Ne l'installez pas près de sources de chaleur telles que

des radiateurs, bouches de chauffage, poêles ou autres

appareils (y compris des amplificateurs) dégageant de la

chaleur.

9. Ne neutralisez pas la fonction de sécurité de la fiche polarisée

ou de terre. Une fiche polarisée a deux broches, l'une plus

large que l'autre. Une fiche de terre a deux broches identiques

et une troisième broche pour la mise à la terre. La broche plus

large ou la troisième broche servent à votre sécurité. Si la fiche

fournie n'entre pas dans votre prise, consultez un électricien

pour le remplacement de la prise obsolète.

10. Évitez de marcher sur le cordon d'alimentation et de

le pincer, en particulier au niveau des fiches, des prises

secteur, et du point de sortie de l'appareil.

11. N'utilisez que des fixations/accessoires spécifiés par le

fabricant.

12. Utilisez-le uniquement avec le chariot, socle, trépied,

support ou table spécifié par le fabricant ou vendu avec

l'appareil. Si un chariot est utilisé, faites attention à ne pas

être blessé par un renversement lors du déplacement de

l'ensemble chariot/appareil.

13. Débranchez cet appareil en cas d'orage ou de non

utilisation prolongée.

14. Confiez toute réparation à des techniciens de maintenance

qualifiés. Une réparation est nécessaire si l'appareil a été

endommagé d'une quelconque façon, par exemple si le

cordon ou la fiche d'alimentation est endommagé, si du

liquide a été renversé sur l'appareil ou si des objets sont

tombés dedans, si l'appareil a été exposé à la pluie ou à

l'humidité, s'il ne fonctionne pas normalement, ou s'il est

tombé.

• L’appareil tire un courant nominal de veille de la prise secteur

quand son interrupteur POWER ou STANDBY/ON n’est pas en

position ON.

• La fiche secteur est utilisée comme dispositif de déconnexion

et doit donc toujours rester accessible.

• Des précautions doivent être prises en cas d'utilisation

d'écouteurs ou d'un casque avec le produit car une pression

acoustique excessive (volume trop fort) dans les écouteurs

ou dans le casque peut causer une perte auditive.

• Si vous rencontrez des problèmes avec ce produit, contactez

TEAC pour une assistance technique. N'utilisez pas le produit

tant qu'il n'a pas été réparé.

ATTENTION

• N'exposez pas cet appareil aux gouttes ni aux

éclaboussures.

• Ne placez pas d'objet rempli de liquide sur l'appareil,

comme par exemple un vase.

• N’installez pas cet appareil dans un espace confiné comme

une bibliothèque ou un meuble similaire.

• L’appareil doit être placé suffisamment près de la prise de

courant pour que vous puissiez à tout moment attraper

facilement la fiche du cordon d'alimentation.

• Si le produit utilise des piles/batteries (y compris un pack

de batteries ou des batteries fixes), elles ne doivent pas être

exposées au soleil, au feu ou à une chaleur excessive.

• PRÉCAUTION pour les produits qui utilisent des batteries

remplaçables au lithium: remplacer une batterie par

un modèle incorrect entraîne un risque d'explosion.

Remplacez-les uniquement par un type identique ou

équivalent.

AVERTISSEMENT

• Les produits ayant une construction de Classe ! sont

équipés d'un cordon d'alimentation avec une fiche de terre.

Le cordon d'un tel produit doit être branché dans une prise

secteur avec terre de sécurité.

AVERTISSEMENT

• Pour éviter d’éventuels dommages auditifs,

n’écoutez pas de façon prolongée à niveau sonore

élevé.

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

TASCAM Model 24 9

F

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

Pour les consommateurs européens

Mise au rebut des équipements électriques et

électroniques et des piles et/ou accumulateurs

(a) Tous les équipements électriques et électroniques et piles/

accumulateurs hors d'usage doivent être traités séparément

de la collecte municipale d'ordures ménagères dans des

points de collecte désignés par le gouvernement ou les

autorités locales.

(b) En vous débarrassant correctement des équipements

électriques/électroniques et piles/accumulateurs hors

d'usage, vous contribuerez à la sauvegarde de précieuses

ressources et à la prévention de potentiels effets négatifs sur

la santé humaine et l'environnement.

(c) Le traitement incorrect des équipements électriques/

électroniques et piles/accumulateurs hors d'usage

peut avoir des effets graves sur l'environnement et la

santé humaine en raison de la présence de substances

dangereuses dans les équipements.

(d) Le symbole de déchets d'équipements électriques

et électroniques (DEEE), qui représente une

poubelle à roulettes barrée d'une croix, indique

que les équipements électriques/électroniques et piles/

accumulateurs doivent être collectés et traités

séparément des déchets ménagers.

Si une pile ou un accumulateur contient plus que les

valeurs de plomb (Pb), mercure (Hg) et/ou cadmium

(Cd) telles que spécifiées dans la directive sur les

piles et accumulateurs (2006/66/EC, 2013/56/EU), alors les

symboles chimiques de ces éléments seront indiqués sous le

symbole DEEE.

(e) Des systèmes de retour et de collecte sont disponibles

pour l'utilisateur final. Pour des informations plus détaillées

sur la mise au rebut des vieux équipements électriques/

électroniques et piles/accumulateurs hors d'usage, veuillez

contacter votre mairie, le service d'ordures ménagères ou le

magasin dans lequel vous avez acquis l'équipement.

Pb, Hg, Cd

10 TASCAM Model 24

Précautions concernant les appareils sans fil

Conformité de l'émetteur radio et

interférences

Ce produit a une fonction d’émetteur large bande utilisant la

bande des 2,4GHz.

Plage de fréquences utilisée: 2400MHz – 2480MHz

Puissance maximale d’émission: Bluetooth® de classe2 (moins

de 2,5mW)

Veuillez n’utiliser cet appareil que dans le pays où il a été acheté.

Selon le pays, des restrictions d’usage de la technologie sans fil

Bluetooth peuvent exister.

Modèle pour le Canada

Conformité de l’émetteur radio

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

1) l’appareil ne doit pas produire de brouillage;

2) l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le

fonctionnement.

Marquage d'autorisation

IC: 1559C-MODEL24

Conformité de brouillage

Marquage d'autorisation

CAN ICES-3(B)/NMB-3(B)

Modèle pour l'EEE

(Espace économique européen)

Par la présente, TEAC Corporation déclare que

ce type d’équipement radio est en conformité

avec la directive 2014/53/UE, et avec les autres

directives et règlements de la Commission.

Le texte intégral de la déclaration de conformité pour l'UE est

disponible à l'adresse internet suivante (veuillez nous contacter

par e-mail).

https://www.tascam.eu/en/kontakt.html

Importateur pour l'UE: TEAC EUROPE GmbH.

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Allemagne

Exigences relatives à l'exposition aux

rayonnements

Cet équipement satisfait la réglementation reconnue à l'échelle

internationale en matière d'exposition humaine aux ondes

radioélectriques générées par l'émetteur.

Déclaration de conformité

Modèle pour le Canada

Cet équipement est conforme aux limites d'exposition aux

radiofréquences établies pour un environnement non contrôlé

par le CNR-102 d'IC.

Modèle pour USA/Canada

Cet équipement est conforme aux limites d’exposition au

rayonnement fixées par la FCC/IC pour un environnement

non contrôlé, et répond aux directives d’exposition aux

radiofréquences (RF) de la FCC et aux règles CNR-102

d’exposition aux radiofréquences de l’IC. Cet équipement émet

une énergie RF très faible qui est considérée conforme sans

évaluation de l’exposition maximale autorisée. Cependant, cet

équipement doit être installé et utilisé en gardant une distance

de 20cm ou plus entre le dispositif rayonnant et le corps (à

l’exception des extrémités: mains, poignets, pieds et chevilles).

Modèle pour l'EEE (Espace économique européen)

Cet équipement est conforme à la norme EN.62311: Évaluation

des équipements électroniques et électriques en relation

avec les restrictions d'exposition humaine aux champs

électromagnétiques; la norme harmonisée de la Directive

2014/53/UE.

TASCAM Model 24 11

S

PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGAS ELÉCTRICAS, NO QUITE LA CARCASA (NI

LA TAPA TRASERA) DENTRO DE LA UNIDAD NO HAY PIEZAS QUE PUEDAN SER REPARADAS POR

EL USUARIO.

El símbolo de un rayo dentro de un triángulo equilátero se usa internacionalmente para alertar al

usuario de la presencia de “voltajes peligrosos” no aislados dentro de la carcasa del aparato que

pueden ser de magnitud suficiente para constituir un riesgo real de descarga eléctrica para las

personas.

El símbolo de exclamación dentro de un triángulo equilátero se utiliza para advertir al usuario

de la existencia de importantes instrucciones de uso y mantenimiento (reparaciones) en los

documentos que acompañan a la unidad.

CUIDADO: PARA EVITAR EL RIESGO DE INCENDIOS O

DESCARGAS ELÉCTRICAS, NO EXPONGA ESTE APARATO A

LA LLUVIA O LA HUMEDAD.

Para EE.UU.

Declaración de conformidad

Modelo: Model 24

Fabricante: TASCAM

Responsable: TEAC AMERICA, INC.

Dirección: 10410 Pioneer Blvd. Suite #1, Santa Fe Springs,

California 90670, U.S.A.

Teléfono: 1-323-726-0303

Este dispositivo cumple con lo indicado en la sección 15 de

las normas FCC y su funcionamiento está sujeto a las dos

condiciones siguientes: (1) este aparato no debe producir

interferencias molestas, y (2) este aparato debe aceptar

cualquier interferencia que reciba, incluso aquellas que

produzcan un funcionamiento no deseado.

PARA EL USUARIO

Se ha verificado que este aparato cumple con los límites

establecidos para las unidades digitales de clase B, de acuerdo

a lo indicado en la sección 15 de las normas FCC. Esos límites

han sido diseñados para ofrecer una protección razonable

contra las interferencias molestas en una instalación no

profesional. Este aparato genera, usa y puede irradiar energía

de radiofrecuencias y, si no es instalado y usado de acuerdo a

este manual de instrucciones, puede producir interferencias

molestas en las comunicaciones de radio. No obstante,

tampoco hay garantías de que no se produzcan ese tipo de

interferencias en una instalación concreta. Si este aparato

produce interferencias molestas en la recepción de la radio

o TV (lo que puede determinar encendiendo y apagando el

aparato), el usuario será el responsable de tratar de corregirlas

usando una o más de las siguientes medidas.

a) Reorientar o reubicar la antena receptora.

b) Aumentar la separación entre este aparato y el receptor.

c) Conectar este aparato a una salida de corriente o regleta

diferente a la que esté conectado el receptor.

d) Consultar a su distribuidor o a un técnico especialista en

radio/TV para que le ayuden.

PRECAUCIÓN

Cualquier modificación en este aparato no aprobada

expresamente y por escrito por TEAC CORPORATION podrá

anular la autorización del usuario a usar dicho aparato.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este aparato cumple con todos los requisitos

establecidos por las Directivas Europeas, así

como por otras Regulaciones de la Comisión

Europea.

En Norteamérica/Canadá utilice solo fuentes de

alimentación de 120 V.

12 TASCAM Model 24

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Preste atención a todos los avisos.

4. Siga todo lo indicado en las instrucciones.

5. No utilice este aparato cerca del agua.

6. Limpie este aparato solo con un trapo seco.

7.

No bloquee ninguna de las aberturas de ventilación. Instale

este aparato de acuerdo con las instrucciones del fabricante.

8. No instale este aparato cerca de fuentes de calor como

radiadores, calentadores, hornos o cualquier otro aparato

(incluyendo amplificadores) que produzca calor.

9. No anule el sistema de seguridad que supone un enchufe

de corriente polarizado o con toma de tierra. Un enchufe

polarizado tiene dos bornes de distinta anchura. Uno con

toma de tierra tiene dos bornes iguales y una lámina para

la conexión a tierra. El borne ancho del primer tipo de

enchufe y la lámina del otro se incluyen para su seguridad.

Si el enchufe que se incluye con la unidad no encaja en

su salida de corriente, haga que un electricista cambie su

salida anticuada.

10. Coloque el cable de corriente de forma que no pueda

quedar aplastado o retorcido, especialmente allí donde

estén los conectores, receptáculos y en el punto en que el

cable sale del aparato.

11. Utilice solo accesorios/complementos que hayan sido

especificados por el fabricante.

12. Utilice este aparato solo con un bastidor, soporte, trípode o

superficie especificado por el fabricante o que se venda con

el propio aparato. Cuando utilice un bastidor con ruedas,

tenga cuidado al mover la combinación bastidor/aparato

para evitar posibles daños en caso de que vuelquen.

13. Desconecte de la corriente este aparato durante las

tormentas eléctricas o cuando no lo vaya a usar durante un

periodo de tiempo largo.

14. Consulte cualquier posible avería al servicio técnico oficial.

Este aparato deberá ser revisado cuando se haya dañado de

alguna forma, como por ejemplo si el cable de corriente o

el enchufe se ha roto, si se ha derramado cualquier líquido

o se ha introducido un objeto dentro de la unidad, si el

aparato ha quedado expuesto a la lluvia o la humedad, si no

funciona normalmente o si se ha caído al suelo.

• Este aparato recibe corriente nominal no operativa de la

salida de corriente AC aun cuando su interruptor POWER o

STANDBY/ON no esté en la posición ON.

• El enchufe de alimentación sirve como dispositivo de

desconexión, por lo que colóquelo de forma que siempre

pueda acceder a él fácilmente.

• Una presión sonora excesiva en los auriculares puede

producirle daños auditivos.

• Si experimenta cualquier tipo de problema con este aparato,

póngase en contacto con TEAC para una reparación. No

utilice de nuevo el aparato hasta que no haya sido reparado.

CUIDADO

• No permita que este aparato quede expuesto a

salpicaduras de ningún tipo.

• No coloque objetos que contengan líquidos, como jarrones,

encima de este aparato.

• No instale este aparato encastrado en una librería o mueble

similar.

• El aparato debe estar colocado lo suficientemente cerca de

la salida de corriente como para poder acceder al enchufe

en cualquier momento.

• Si este aparato utiliza pilas, dichas pilas (el bloque de pilas

o las pilas individuales instaladas) no deben ser expuestas a

niveles de calor excesivos como expuestas directamente a

la luz solar o sobre un fuego.

• AVISO para aquellos aparatos que usen pilas de litio

recambiables: existe el riesgo de explosión en caso de que

la pila sea sustituida por otra del tipo incorrecto. Sustituya

la pila únicamente por otra idéntica o equivalente.

PRECAUCIÓN

• Los productos de Clase ! están equipados con una cable

de alimentación con un enchufe con toma de tierra. Por

este motivo, debe conectar el cable de alimentación de

este aparato a una salida de corriente que disponga de una

conexión a toma de tierra de seguridad.

PRECAUCIÓN

• Para evitar posibles daños auditivos, no utilice este

aparato a niveles de volumen excesivos durante

periodos de tiempo prolongados.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

TASCAM Model 24 13

S

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Para los usuarios europeos

Eliminación de aparatos eléctricos y electrónicos y

pilas y/o acumuladores

(a) Nunca debe eliminar un aparato eléctrico o electrónico y/o

pilas/acumuladores junto con el resto de la basura orgánica.

Este tipo de aparatos deben ser depositados en los “puntos

limpios” creados a tal efecto por su Ayuntamiento o por la

empresa de limpieza local.

(b) Con la correcta eliminación de los aparatos eléctricos y

electrónicos y/o pilas/acumuladores estará ayudando a

ahorrar valiosos recursos y evitará a la vez todos los efectos

negativos potenciales tanto para la salud como para el

entorno.

(c) Una eliminación incorrecta de este tipo de aparatos y/o

pilas/acumuladores junto con la basura orgánica puede

producir efectos graves en el medio ambiente y en la salud

a causa de la presencia de sustancias potencialmente

peligrosas que pueden contener.

(d) El símbolo del cubo de basura tachado (WEEE)

indica la obligación de separar los aparatos eléctricos

y electrónicos y/o pilas/acumuladores del resto de

basura orgánica a la hora de eliminarlos.

Si la batería o acumulador contiene una cantidad

superior de plomo (Pb), mercurio (Hg) y/o cadmio

(Cd) que los valores especificados en la Directiva

de pilas y baterías (2006/66/EC, 2013/56/EU),

aparecerán los símbolos de estas sustancias químicas

(Pb, Hg y/o Cd) debajo del símbolo del cubo de basura

tachado.

(e) Los llamados “puntos limpios” de recogida y retirada

selectiva de este tipo de productos y/o pilas/acumuladores

están disponibles para cualquier usuario final. Para más

información acerca de la eliminación de este tipo de

elementos, póngase en contacto con el departamento

correspondiente de su Ayuntamiento, empresa de limpieza

o recogida de basuras o con el comercio en el que adquirió

este aparato.

Pb, Hg, Cd

14 TASCAM Model 24

Precauciones de aparatos inalámbricos

Conformidad para la emisión de radio e

interferencias

Este producto dispone de la función de emisor de banda amplia

y usa la banda de 2.4 GHz.

Rango de frecuencias usadas: 2400 – 2480 MHz

Potencia salida máxima: Bluetooth® Class 2 (inferior a 2.5 mW)

Utilice este aparato únicamente en el país o región en el que lo

haya adquirido. Dependiendo del país, es posible que existan

determinadas limitaciones al uso de la tecnología inalámbrica

Bluetooth.

Modelo para EE.UU.

Declaración de conformidad

Responsable: TEAC AMERICA, INC.

Dirección: 10410 Pioneer Blvd. Suite #1, Santa Fe

Springs, California 90670, U.S.A.

Teléfono: 1-323-726-0303

Este dispositivo cumple con lo indicado en la sección 15 de

las normas FCC y su funcionamiento está sujeto a las dos

condiciones siguientes: (1) este aparato no debe producir

interferencias molestas, y (2) este aparato debe aceptar

cualquier interferencia que reciba, incluso aquellas que

produzcan un funcionamiento no deseado.

Etiqueta de autorización

FCC ID: XEG-MODEL24

Modelo para la Unión Europea

Por la presente, TEAC Corporation declara

que el dispositivo de radio de este aparato

cumple con la Directiva 2014/53/EU., así como

otras Regulaciones y Directivas de la Comisión

Europea.

El texto completo de la declaración de conformidad para la EU

está disponible en la siguiente página web. En caso de dudas,

póngase en contacto con nosotros vía email.

https://www.tascam.eu/en/kontakt.html

Importador para la UE: TEAC Europe GmbH

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

Requisitos de exposición a radiaciones

Este aparato cumple con todas las normativas y regulaciones,

reconocidas internacionalmente, relacionadas con la exposición

de los seres humanos a las ondas de radio generadas por el

transmisor.

Declaración de cumplimiento

Modelo para EE.UU.

Este aparato cumple con los límites de exposición a

radiaciones expuestos en la FCC/IC en lo relativo a entornos no

controlados y cumple con las reglas generales de exposición a

radiofrecuencias.

Modelo para EE. UU./Canadá

Este aparato digital de clase B cumple con la Normativa

Canadiense ICES-003.

Este aparato cumple con los límites de exposición a

radiaciones expuestos en la FCC/IC en lo relativo a entornos no

controlados y cumple con las reglas generales de exposición

a radiofrecuencias (RF) FCC y con las normas de exposición a

radiofrecuencias (RF) RSS-102 del IC. Este equipo tiene niveles

muy bajos de energía de RF que quedan sobradamente por

debajo de los valores indicados en la evaluación de exposición

máxima (MPE). Aún así es recomendable que lo instale y utilice

con el emisor a una distancia mínima de 20 cm con respecto al

cuerpo de cualquier persona (excluyendo extremidades: manos,

brazos, pies y piernas).

Modelo para la Unión Europea

Este equipo cumple con la norma EN.62311; Evaluación

de equipos eléctricos y electrónicos en relación a las

restricciones en la exposición de las personas a los campos

electromagnéticos; standard armonizado por la DIRECTIVA

2014/53/EU.

TASCAM Model 24 15

Contents

IMPORTANT SAFETY INSTRUCTIONS ..................................... 3

Wireless equipment precautions ........................................... 6

4 – Managing Songs .............................................................. 32

Viewing the song list ....................................................................... 32

Song Operation................................................................................. 32

Creating a New Song ...................................................................... 32

Loading Songs ................................................................................... 33

Saving the current song................................................................. 33

Viewing song information ............................................................ 33

Clearing all marks ............................................................................. 33

Deleting songs .................................................................................. 33

Protecting/unprotecting songs .................................................. 34

Editing song names ......................................................................... 34

Editing text ..................................................................................... 34

Loading songs created on different TASCAM Model series

products .............................................................................................. 35

5 – Basic recording .................................................................36

Selecting the input source ............................................................ 36

Setting the MODE switch .............................................................. 36

Setting phantom power ................................................................ 36

Monitoring .......................................................................................... 36

SIG indicators and level meters ................................................... 37

Recording ............................................................................................ 37

Undoing operations ........................................................................ 38

Undoing the previous operation ........................................... 38

Using the built-in effects ............................................................... 38

Setting the built-in effect .......................................................... 38

6 – Recorder functions...........................................................40

Locate function ................................................................................. 40

Changing the playback position ............................................ 40

Using the direct locate function to locate .......................... 40

Repeat playback function ............................................................. 40

Punch in/out function .................................................................... 40

Using the footswitch to punch in/out .................................. 40

Setting up the footswitch ......................................................... 41

Setting the footswitch polarity ............................................... 41

Automatic punch in/out function ............................................. 41

Setting the punch in/out points ............................................ 41

Setting a pre roll point ............................................................... 42

Rehearsing punching in and out ........................................... 42

Using automatic punching in and out ................................. 42

7 – Track editing .....................................................................43

Clearing tracks ................................................................................... 43

Importing tracks ............................................................................... 43

Mixing down ...................................................................................... 44

Stereo mix export function ........................................................... 44

8 - Mark functions .................................................................. 45

Using mark functions ...................................................................... 45

Adding marks .................................................................................... 45

Moving between marks ................................................................. 45

Clearing individual marks ............................................................. 45

9 – Settings and Information ................................................ 46

Viewing information ....................................................................... 46

CARD Screen .................................................................................. 46

SONG Screen ................................................................................. 46

FIRMWARE Screen ....................................................................... 46

Setting the song name format .................................................... 46

Setting the WORD item ............................................................. 46

Setting MIDI time code operation.............................................. 47

Restoring factory default settings .............................................. 47

Formatting SD cards ........................................................................ 47

Playing WAV files on SD cards (SD PLAY mode) ..................... 48

1 – Introduction ..................................................................... 16

Using the TEAC Global Site ........................................................... 16

Features ............................................................................................... 16

Items included with this product ............................................... 17

Conventions used in this manual ............................................... 17

Product registration ........................................................................ 17

Precautions for placement and use ........................................... 17

Notes about power supply ........................................................... 17

Beware of condensation ................................................................ 17

Cleaning the unit .............................................................................. 17

About TASCAM customer support service .............................. 17

About SD cards.................................................................................. 18

Precautions for use ...................................................................... 18

SD card write protection ........................................................... 18

Note about formatting .............................................................. 18

Bluetooth® .......................................................................................... 18

Profiles ............................................................................................. 18

Codecs ............................................................................................. 18

Content protection ..................................................................... 18

Transmission security ................................................................. 18

2 – Names and Functions of Parts ........................................ 19

Top panel ............................................................................................. 19

Analog input jack section ......................................................... 20

Input channel mixing section ................................................. 21

Analog output jack section ...................................................... 22

Screen operation section .......................................................... 22

Built-in effects operation section ........................................... 23

Analog output adjustment section ....................................... 24

Rear panel ........................................................................................... 24

Home Screen...................................................................................... 25

Meters Screen .................................................................................... 26

Meter Screen details ................................................................... 26

Menu structure.................................................................................. 27

Basic MENU screen operations .................................................... 27

Menu operation procedures .................................................... 27

3 – Preparation ....................................................................... 28

Connecting other equipment...................................................... 28

Connecting microphones ......................................................... 29

Connecting guitars, basses and similar instruments ...... 29

Connecting electronic devices and other audio

equipment .................................................................................... 29

Connecting monitor speakers ................................................ 29

Connecting headphones .......................................................... 29

Connecting a computer ............................................................ 29

Connecting with Bluetooth devices ..................................... 29

Inserting and removing SD cards ............................................... 30

Inserting SD cards........................................................................ 30

Removing SD cards ..................................................................... 30

SD card write protection switches ......................................... 30

Turning the power on and off...................................................... 30

Setting the built-in clock date and time .................................. 31

Adjusting the display ...................................................................... 31

Adjusting the display contrast ................................................ 31

Adjusting the display brightness ........................................... 31

Preparing an SD card for use ........................................................ 31

16 TASCAM Model 24

Thank you very much for purchasing the

TASCAM Model 24 Multitrack Live Recording Console.

Before using this unit, read this Owner’s Manual carefully so that

you will be able to use it correctly and enjoy working with it for

many years. After you have finished reading this manual, please

keep it in a safe place for future reference.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global

Site:

http://teac-global.com/

In the TASCAM Downloads section, select the desired language

to open the Downloads website page for that language.

Features

022 input analog mixer with 22 line and 16 mic inputs

0Multitrack recording and playback with 24-track recording

(22 input channels and MAIN MIX L/R bus)

0USB audio interface functions built-in

o 24 tracks (22 input channels and MAIN MIX L/R bus) can

be input to the computer

o 22 track outputs and computer outputs can be assigned

to channel inputs

o Supports USB 2.0 audio with resolutions up to 24-bit and

48kHz sampling frequency

0Analog compressors included on channel 1-12 inputs

0100mm faders enable precise adjustments

0LINE/INST (BAL) input jacks that support high impedance

(Hi-Z) on channels 1-2

0Channel inserts (INSERT) on channels 1-2

0Multiple buses include stereo main (MAIN MIX L/R bus), sub

(SUB L/R bus) and monitor (MONITOR OUT 1/2)

03 AUX sends (MON 1/MON 2/FX)

0Input channels have 3-band semi-parametric EQs with ad-

justable mid frequencies

0Outputs have a 7-band stereo graphic EQs useful for adjust-

ing the mix

016 TASCAM preset effects can be used for a variety of appli-

cations

0Multitrack recording and playback possible using SD cards

0Bluetooth® audio playback and recording supported

0Punching in and out function per track (including punching

in and out automatically and with footswitches)

0SD/SDHC cards and SDXC cards (Class 10 or more)

0Multiple footswitch functions available (select play/pause,

effect muting or punch in/out)

0CONTROL ROOM L/R and PHONES outputs built-in (levels can

be adjusted and PFL/AFL L/R bus monitoring can be enabled

separately)

Contents 1 – Introduction

Dimensional drawings / Dessins avec cotes /

Esquema de dimensiones ..................................................165

Block diagram / Schéma fonctionnel /

Diagrama de bloques .........................................................166

Level diagram / Schéma des niveaux /

Diagrama de niveles ...........................................................167

10 –Using a computer to transfer data ................................49

Connecting with a Computer ...................................................... 49

Disconnecting ............................................................................... 50

Loading WAV files from a computer .......................................... 50

11 – USB audio interface functions ...................................... 51

Installing the dedicated software .............................................. 51

Installing the Windows dedicated software ...................... 51

Installing the Mac dedicated software ................................ 52

Working with Gatekeeper ........................................................ 52

Uninstalling the dedicated software ......................................... 54

Uninstalling the Windows dedicated software ................. 54

Uninstalling the Mac dedicated software ........................... 54

Opening the Settings Panel ......................................................... 54

Windows ......................................................................................... 54

Mac ................................................................................................... 54

Notification function ....................................................................... 54

Settings Panel overview ................................................................ 54

Setting Sound Properties .............................................................. 55

Simultaneous ASIO/WDM playback .......................................... 55

USB audio mode ............................................................................... 56

Setting procedures for use with OBS Studio and other

streaming applications .............................................................. 56

12 – Messages ........................................................................58

13 – Troubleshooting ............................................................60

14 – Specifications .................................................................62

General ................................................................................................. 62

Inputs and outputs .......................................................................... 62

Analog audio input and output ratings .............................. 62

Control input/output ................................................................. 63

Computer system requirements ................................................. 63

Windows ......................................................................................... 63

Mac ................................................................................................... 63

iOS device ....................................................................................... 63

Supported audio drivers ........................................................... 63

Audio performance ......................................................................... 63

Bluetooth ............................................................................................ 64

Other ..................................................................................................... 64

TASCAM Model 24 17

1 – Introduction

Items included with this product

This product includes the following items.

Take care when opening the package to avoid damaging the

items. Keep the packing materials for transportation in the

future. Please contact the store where you purchased this unit

if any of these items are missing or have been damaged during

transportation.

0Main unit................................................................................................× 1

0Power cord.............................................................................................× 1

0Owner’s Manual (this document) including warranty...........× 1

Conventions used in this manual

In this manual, we use the following conventions:

0When we refer to buttons, connectors and other parts of this

unit and other equipment, we use a bold font like this: MENU

button.

0When we show characters that appear on the display, the

typeface looks like this: MENU .

0The four buttons under the display are called the function

buttons. From left to right, they are shown as buttons F1,

F2, F3 and F4. Moreover, the functions at the bottoms of the

screens will be shown after the button names.

Examples: F1 button, F4 button

0SD/SDHC/SDXC memory cards are referred to as “SD cards”.

0Computers, portable audio devices and other equipment

connected to this unit using Bluetooth are called “Bluetooth

devices”.

0Groups of recorded data are referred to as “songs”.

0The song that is currently selected is called the “current song”.

0Information shown on a computer display is written like this:

OK .

0As necessary, additional information is provided under TIP,

NOTE and CAUTION headings.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and describe special

cases.

ATTENTION

Failure to follow these instructions could result in damage to

equipment or lost data, for example.

VCAUTION

Failure to follow these instructions could result in injury.

Product registration

Customers in the USA, please visit the following TASCAM web-

site to register your TASCAM product online.

https://tascam.com/us/

Precautions for placement and use

0The operating temperature range of this unit is 5–35 °C.

0Do not install this unit in the following types of locations.

Doing so could make the sound quality worse or cause mal-

function.

Places with significant vibrations

Next to a window or in another location exposed to direct

sunlight

Near heaters or other extremely hot places

Extremely cold places

Very humid or poorly ventilated places

Very dusty places

0To enable good heat dissipation, do not place anything on

top of the unit.

0Do not place the unit on top of a power amplifier or other

device that generates heat.

Notes about power supply

0Insert the included power cord all the way into the AC IN

connector.

0Do not connect a power supply other than one that is

AC100V - 240V (50/60Hz).

0Hold the power cord by its plug when connecting or discon-

necting it.

Beware of condensation

Condensation could occur if the unit is moved from a cold place

to a warm place, it is used immediately after a cold room has

been heated or it is otherwise exposed to a sudden temperature

change.

To prevent this, or if this occurs, let the unit sit for one or two

hours at the new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe with

chemical cleaning cloths, thinner, alcohol or other chemical

agents. Doing so could damage the surface or cause discoloration.

About TASCAM customer support service

TASCAM products are supported and warrantied only in their

country/region of purchase.

To receive support after purchase, on the TASCAM Distributors

list page of the TEAC Global Site (http:// teac-global.com/),

search for the local company or representative for the region

where you purchased the product and contact that organization.

When making inquiries, the address (URL) of the shop or web

shop where it was purchased and the purchase date are required.

Moreover, the warranty card and proof of purchase might also be

necessary.

18 TASCAM Model 24

1 – Introduction

About SD cards

This unit uses SD cards for recording and playback.

This unit can use SD cards that are Class 10 or higher and com-

patible with SD, SDHC or SDXC standards.

A list of SD cards that have been confirmed for use with this unit

can be found on our web site. Please access to a product page of

this product from the TEAC Global Site (http://teac-global.com)

to find the list or contact the TASCAM customer support service.

Precautions for use

SD cards are delicate media.

In order to avoid damaging SD cards, please take the following

precautions when handling them.

0Do not leave them in extremely hot or cold places.

0Do not leave them in extremely humid places.

0Do not let them get wet.

0Do not put things on top of them or twist them.

0Do not hit them.

0Do not remove or insert them during recording, playback,

data transmission or other access.

0When transporting them, put them into cases, for example.

SD card write protection

This unit writes track information to the media in order to im-

prove operation performance. Since, for example, setting infor-

mation cannot be written to SD cards that are write-protected,

settings will not be retained when the unit is restarted and

performance will be otherwise affected.

Note about formatting

SD cards formatted by this unit are optimized to improve perfor-

mance during recording. Use this unit to format the SD cards to

be used with it. Errors might occur when recording with this unit

using an SD card formatted by a computer or other device.

Bluetooth®

This unit has a built-in Bluetooth audio receiver, and can input

sound played on a computer or portable audio device that

supports Bluetooth (Bluetooth device).

ATTENTION

The Bluetooth function of this unit is not guaranteed to en-

able connection or operation with all Bluetooth devices.

Profiles

This unit supports the following Bluetooth profiles.

0A2DP (Advanced Audio Distribution Profile)

In order to transfer audio by Bluetooth, the Bluetooth device

must support A2DP.

Even if a Bluetooth device supports the same profiles, though,

its functions might differ according to its specifications.

Codecs

This unit supports the following codecs. It will automatically

select one of them during audio transfer.

0SBC

0AAC

The unit will select the appropriate codec to use according to

the codec compatibility of the other Bluetooth device and com-

munication conditions.

NOTE

i You cannot select the codec to be used by pressing a button,

for example.

i Due to characteristics of Bluetooth wireless technology,

playback from this unit will be slightly delayed compared to

playback from the Bluetooth device.

Content protection

This unit supports SCMS-T as a form of content protection when

transmitting audio, so it can play protected audio.

Transmission security

This unit supports security functions during Bluetooth transmis-

sion in accordance with the Bluetooth standard specifications,

but it does not guarantee the privacy of such transmissions.

TEAC CORPORATION will bear no responsibility should an infor-

mation leak occur during transmission by Bluetooth.

TASCAM Model 24 19

2 – Names and Functions of Parts

Top panel

a Analog input jack section

Use this section to connect the input jacks for each channel

and to adjust the input levels.

b Input channel mixing section

Use this section to choose input sources for each channel,

adjust compressors and equalizers, and set levels sent to

each bus (MAIN MIX L/R, PFL/AFL L/R, MONITOR OUT 1/2, FX,

SUB L/R).

c Analog output jack section

Use this section to connect the output jacks and adjust the

output equalizer.

d Screen operation section

Use this section to operate the meter, home and MENU screens

shown on the display.

e Built-in effects operation section

Operate the built-in effects and adjust the output levels for

each output in this section.

f Analog output adjustment section

Adjust the output levels from the MAIN OUTPUT, SUB

OUTPUT, OUTPUT MON 1 and OUTPUT MON 2 jacks in this

section.

20 TASCAM Model 24

2 – Names and Functions of Parts

Analog input jack section

1 MIC input jacks (1-12, 13/14-19/20)

These are balanced XLR jacks for mic input.

o XLR (1: GND, 2: HOT, 3: COLD)

2 LINE/INST (BAL) mono input jacks (1-2)

These standard TRS jacks are mono line inputs.

When directly connecting a guitar, bass or other instrument,

set the INST switch to on (pushed in).

o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)

3 LINE (BAL) input jacks (3-12)

These standard TRS jacks are line inputs.

o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)

4 L/MONO (BAL)/R (BAL) stereo input jacks (13/14-

19/20)

These standard TRS jacks are stereo line inputs.

If only the L/MONO (BAL) jack in a pair is connected, the

same signal was be sent to both left and right channels.

o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)

5 −10dBV (external input) jacks (21/22, RCA pin)

These RCA pin jacks are analog line inputs.

Use RCA cables to connect CD players and similar devices to

these jacks.

6 STEREO input jack (21/22, stereo mini)

This stereo mini jack is a line input jack.

Use this to connect with the line output jack of a tablet or

other external device.

7 INSERT jacks (1-2, standard)

Use these standard TRS jacks to connect external devices

(effects).

o TRS (Tip: SEND, Ring: RETURN, Sleeve: GND)

8 GAIN knobs and SIG indicators (1-12, 13/14-19/20)

Use the GAIN knobs to adjust the input levels of each chan-

nel.

its SIG indicator will light green when a signal is input (−

56dB or higher).

If a SIG indicator stays lit red continuously, lower the GAIN

knob.

9 LOW CUT switches (1-12, 13/14-19/20)

Turn this switch on (pushed in) to enable low cut filters that

cut noise and other sounds at low frequencies.

0 INST switches (1-2)

Set according to the LINE/INST (BAL) input jack input sourc-

es.

Turn the INST switch on (pushed in) when connecting an

guitar, bass or other equipment with high output impedance.

Turn the INST switch off (not pushed in) when connecting

electronic instruments, audio devices, mics and other equip-

ment.

La page charge ...

Tascam 24 Le manuel du propriétaire

Tascam 24 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents