Tascam 16 Le manuel du propriétaire

ENGLISHFRANÇAISESPAÑOL

042972002

Model 16

Multitrack Live Recording Console

OWNER’S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

oTASCAM is a registered trademark of TEAC Corporation.

oSDXC Logo is a trademark of SD-3C, LLC.

oThe Bluetooth® word mark and logo are the property of

Bluetooth SIG, Inc. and are used by TEAC Corporation with

permission.

oMicrosoft, Windows and Windows Media are either registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

oApple, Mac, macOS, iPad, iPadOS and iTunes are trademarks

of Apple Inc. in the United States and other countries.

oLightning is a trademark of Apple Inc.

oApp Store is a service mark of Apple Inc.

oIOS is a trademark or registered trademark of Cisco in the U.S.

and other countries and is used under license

oASIO is a trademark of Steinberg Media Technologies GmbH.

oOther company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

Information is given about products in this manual

only for the purpose of example and does not indicate

any guarantees against infringements of third-party

intellectual property rights and other rights related to

them. TEAC Corporation will bear no responsibility for

infringements on third-party intellectual property rights

or their occurrence because of the use of these products.

Properties copyrighted by third parties cannot be used for

any purpose other than personal enjoyment and the like

without the permission of the right holders recognized by

copyright law. Always use this equipment properly.

TEAC Corporation will bear no responsibility for rights

infringements committed by users of this product.

2 TASCAM Model 16

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sucient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For U.S.A.

Declaration of Conformity

Model Number: Model 16

Trade Name: TASCAM

Responsible party: TEAC AMERICA, INC.

Address: 10410 Pioneer Blvd. Suite #1, Santa

Fe Springs, California 90670, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

INFORMATION TO THE USER

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following

measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician

for help.

CAUTION

Changes or modications to this equipment not expressly

approved by TEAC CORPORATION for compliance could void

the user’s authority to operate this equipment.

IN USA/CANADA, USE ONLY ON 120 V SUPPLY.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN

ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A

LA NORME NMB-003 DU CANADA.

This product complies with the European

Directives request and the other Commission

Regulations.

TASCAM Model 16 3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing

isrequired when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

• The apparatus draws nominal non-operating power from the

AC outlet with its POWER or STANDBY/ON switch not in the

ON position.

• The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

• Caution should be taken when using earphones or

headphones with the product because excessive sound

pressure (volume) from earphones or headphones can cause

hearing loss.

• If you are experiencing problems with this product, contact

TEAC for a service referral. Do not use the product until it has

been repaired.

WARNING

• Products with Class ! construction are equipped with a

power supply cord that has a grounding plug. The cord of

such a product must be plugged into an AC outlet that has

a protective grounding connection.

WARNING

• To prevent possible hearing damage, do not listen

at high volume levels for long periods.

CAUTION

• Do not expose this apparatus to drips or splashes.

• Do not place any objects lled with liquids, such as vases,

on the apparatus.

• Do not install this apparatus in a conned space such as a

book case or similar unit.

• The apparatus should be located close enough to the AC

outlet so that you can easily grasp the power cord plug at

any time.

• If the product uses batteries (including a battery pack

or installed batteries), they should not be exposed to

sunshine, re or excessive heat.

• CAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace only

with the same or equivalent type.

4 TASCAM Model 16

IMPORTANT SAFETY INSTRUCTIONS

For European Customers

Disposal of electrical and electronic equipment and

batteries and/or accumulators

(a) All electrical/electronic equipment and waste batteries/

accumulators should be disposed of separately from the

municipal waste stream via collection facilities designated

by the government or local authorities.

(b) By disposing of electrical/electronic equipment and

waste batteries/accumulators correctly, you will help save

valuable resources and prevent any potential negative

eects on human health and the environment.

(c) Improper disposal of waste electrical/electronic equipment

and batteries/accumulators can have serious eects on the

environment and human health because of the presence

of hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment

(WEEE) symbols, which show wheeled bins that

have been crossed out, indicate that electrical/

electronic equipment and batteries/accumulators

must be collected and disposed of separately

from household waste.

If a battery or accumulator contains more than

the specied values of lead (Pb), mercury (Hg),

and/or cadmium (Cd) as dened in the Battery

Directive (2006/66/EC, 2013/56/EU), then the

chemical symbols for those elements will be

indicated beneath the WEEE symbol.

Pb, Hg, Cd

(e) Return and collection systems are available to end users.

For more detailed information about the disposal of old

electrical/electronic equipment and waste batteries/

accumulators, please contact your city oce, waste

disposal service or the shop where you purchased the

equipment.

For China

“仅适用于海拔2000m以下地区安全使用”

“仅适用于非熱帯气候条件下安全使用”

“環境保護使用年限”

产品有毒有害物质或元素的名称及含量

机种: Model 16 有毒有害物质或元素

品名铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

1 CHASSIS部份 ○ ○ ○ ○ ○ ○

2 FRONT PANEL部份 ○ ○ ○ ○ ○ ○

3 螺丝部份 ○ ○ ○ ○ ○ ○

4 线材部份 ○ ○ ○ ○ ○ ○

5 PCB Assy部份 × ○ ○ ○ ○ ○

6 电源部份 × ○ ○ ○ ○ ○

7 附属品部份 × ○ ○ ○ ○ ○

8 LABEL部份 ○ ○ ○ ○ ○ ○

9 包装部份 ○ ○ ○ ○ ○ ○

○ ：表示该有毒有害物质在该部件所有均质材料中的含有量均在 GB/T26572 标准规定的限量要求以下。

× ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572标准规定的限量要求。

（针对现在代替技术困难的电子部品及合金中的铅)

TASCAM Model 16 5

ENGLISH

Wireless equipment precautions

Compliance of radio transmitter and

interference

This product has the function of broadband transmitter using

2.4GHz Band.

Use frequency range: 2400 MHz – 2480 MHz

Maximum output power: Bluetooth® Class 2 (less than 2.5 mW)

Please use only in the country where you purchased the

product. Depending on the country, restrictions on the use of

Bluetooth wireless technology might exist.

Model for USA

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 10410 Pioneer Blvd. Suite #1 Santa

Fe Springs, California 90670, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part.15 of FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Labeling of authorization

FCC ID: XEG-MODEL16

Model for Canada

Compliance of radio transmitter

This device complies with Industry Canada’s licence-exempt

RSSs.

Operation is subject to the following two conditions:

1) This device may not cause interference

2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Labeling of authorization

IC: 1559C-MODEL16

Model for EEA (European Economic Area)

Hereby, TEAC Corporation declares that the radio

equipment type is in compliance with Directive

2014/53/EU., and the other Directives, and

Commission Regulations.

The full text of the EU declaration of conformity is available at

the following internet address: Please contact us by e-mail.

http://tascam.eu/en/kontakt.html

EU Importer: TEAC Europe GmbH

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

Radiation Exposure requirements

This equipment meets the regulation, which is recognized

internationally, for the case of human exposure to radio waves

generated by the transmitter.

Statement of compliance

Model for USA

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment and meets the FCC radio

frequency Exposure Guidelines.

Model for Canada

This equipment complies with IC RSS-102 radiation exposure

limits set forth for an uncontrolled environment.

Model for USA/Canada

This Class B digital apparatus complies with Canadian ICES-003.

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-102

of the IC radio frequency (RF) Exposure rules. This equipment

has very low levels of RF energy that it deemed to comply

without maximum permissive exposure evaluation (MPE). But

it is desirable that it should be installed and operated keeping

the radiator at least 20 cm or more away from person’s body

(excluding extremities: hands, wrists, feet and ankles).

Model for EEA (European Economic Area)

This equipment complies with EN.62311; Assessment of

electronic and electrical equipment related to human exposure

restrictions for electromagnetic elds; the harmonised standard

of DIRECTIVE 2014/53/EU.

6 TASCAM Model 16

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

ATTENTION: POUR RÉDUIRE LE RISQUE D’ÉLECTROCUTION, NE RETIREZ PAS LE CAPOT (OU

L’ARRIÈRE). AUCUNE PIÈCE INTERNE N’EST RÉPARABLE PAR L’UTILISATEUR. CONFIEZ TOUTE

RÉPARATION À UN SERVICE APRÈS-VENTE QUALIFIÉ.

Le symbole d’éclair à tête de èche dans un triangle équilatéral sert à prévenir l’utilisateur de la

présence dans l’enceinte du produit d’une «tension dangereuse» non isolée d’une grandeur

susante pour constituer un risque d’électrocution pour les personnes.

Le point d’exclamation dans un triangle équilatéral sert à prévenir l’utilisateur de la présence

d’instructions importantes de fonctionnement et de maintenance (entretien) dans les documents

accompagnant l’appareil.

AVERTISSEMENT: POUR PRÉVENIR LES RISQUES

D’INCENDIE ET D’ÉLECTROCUTION, N’EXPOSEZ PAS CET

APPAREIL À LA PLUIE NI À L’HUMIDITÉ.

AUX USA/CANADA, UTILISEZ UNIQUEMENT UNE TENSION

D’ALIMENTATION DE 120V.

Pour le Canada

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À

LA NORME NMB-003 DU CANADA.

Ce produit est conforme aux impératifs des

directives européennes et autres règlements de

la Commission.

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Tenez compte de tous les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil avec de l’eau à proximité.

6. Nettoyez-le uniquement avec un chion sec.

7. Ne bloquez aucune ouverture de ventilation. Installez-le

conformément aux instructions du fabricant.

8. Ne l’installez pas près de sources de chaleur telles que

des radiateurs, bouches de chauage, poêles ou autres

appareils (y compris des amplicateurs) dégageant de la

chaleur.

9. Ne neutralisez pas la fonction de sécurité de la che

polarisée ou de terre. Une che polarisée a deux broches,

l’une plus large que l’autre. Une che de terre a deux

broches identiques et une troisième broche pour la mise à

la terre. La broche plus large ou la troisième broche servent

à votre sécurité. Si la che fournie n’entre pas dans votre

prise, consultez un électricien pour le remplacement de la

prise obsolète.

10. Évitez de marcher sur le cordon d’alimentation et de

le pincer, en particulier au niveau des ches, des prises

secteur, et du point de sortie de l’appareil.

11. N’utilisez que des xations/accessoires spéciés par le

fabricant.

12. Utilisez-le uniquement avec le chariot, socle, trépied,

support ou table spécié par le fabricant ou vendu avec

l’appareil. Si un chariot est utilisé, faites attention à ne pas

être blessé par un renversement lors du déplacement de

l’ensemble chariot/appareil.

13. Débranchez cet appareil en cas d’orage ou de non

utilisation prolongée.

14. Conez toute réparation à des techniciens de maintenance

qualiés. Une réparation est nécessaire si l’appareil a été

endommagé d’une quelconque façon, par exemple si le

cordon ou la che d’alimentation est endommagé, si du

liquide a été renversé sur l’appareil ou si des objets sont

tombés dedans, si l’appareil a été exposé à la pluie ou à

l’humidité, s’il ne fonctionne pas normalement, ou s’il est

tombé.

• L’appareil tire un courant nominal de veille de la prise secteur

quand son interrupteur POWER ou STANDBY/ON n’est pas en

position ON.

• La che secteur est utilisée comme dispositif de déconnexion

et doit donc toujours rester accessible.

• Des précautions doivent être prises en cas d’utilisation

d’écouteurs ou d’un casque avec le produit car une pression

acoustique excessive (volume trop fort) dans les écouteurs

ou dans le casque peut causer une perte auditive.

• Si vous rencontrez des problèmes avec ce produit, contactez

TEAC pour une assistance technique. N’utilisez pas le produit

tant qu’il n’a pas été réparé.

TASCAM Model 16 7

FRANÇAIS

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

AVERTISSEMENT

• Les produits ayant une construction de Classe ! sont

équipés d’un cordon d’alimentation avec une che de terre.

Le cordon d’un tel produit doit être branché dans une prise

secteur avec terre de sécurité.

AVERTISSEMENT

• Pour éviter d’éventuels dommages auditifs,

n’écoutez pas de façon prolongée à niveau sonore

élevé.

ATTENTION

• N’exposez pas cet appareil aux gouttes ni aux

éclaboussures.

• Ne placez pas d’objet rempli de liquide sur l’appareil,

comme par exemple un vase.

• N’installez pas cet appareil dans un espace conné comme

une bibliothèque ou un meuble similaire.

• L’appareil doit être placé susamment près de la prise de

courant pour que vous puissiez à tout moment attraper

facilement la che du cordon d’alimentation.

• Si le produit utilise des piles/batteries (y compris un pack

de batteries ou des batteries xes), elles ne doivent pas être

exposées au soleil, au feu ou à une chaleur excessive.

• PRÉCAUTION pour les produits qui utilisent des batteries

remplaçables au lithium : remplacer une batterie par

un modèle incorrect entraîne un risque d’explosion.

Remplacez-les uniquement par un type identique ou

équivalent.

Pour les consommateurs européens

Mise au rebut des équipements électriques et

électroniques et des piles et/ou accumulateurs

(a) Tous les équipements électriques et électroniques et

piles/accumulateurs hors d’usage doivent être traités

séparément de la collecte municipale d’ordures ménagères

dans des points de collecte désignés par le gouvernement

ou les autorités locales.

(b) En vous débarrassant correctement des équipements

électriques/électroniques et piles/accumulateurs hors

d’usage, vous contribuerez à la sauvegarde de précieuses

ressources et à la prévention de potentiels eets négatifs

sur la santé humaine et l’environnement.

(c) Le traitement incorrect des équipements électriques/

électroniques et piles/accumulateurs hors d’usage

peut avoir des eets graves sur l’environnement et la

santé humaine en raison de la présence de substances

dangereuses dans les équipements.

(d) Le symbole de déchets d’équipements électriques

et électroniques (DEEE), qui représente une

poubelle à roulettes barrée d’une croix, indique

que les équipements électriques/électroniques

et piles/accumulateurs doivent être collectés et

traités séparément des déchets ménagers.

Si une pile ou un accumulateur contient plus

que les valeurs de plomb (Pb), mercure (Hg) et/

ou cadmium (Cd) telles que spéciées dans la

directive sur les piles et accumulateurs (2006/66/

EC, 2013/56/EU), alors les symboles chimiques

de ces éléments seront indiqués sous le symbole

DEEE.

Pb, Hg, Cd

(e) Des systèmes de retour et de collecte sont disponibles

pour l’utilisateur nal. Pour des informations plus détaillées

sur la mise au rebut des vieux équipements électriques/

électroniques et piles/accumulateurs hors d’usage, veuillez

contacter votre mairie, le service d’ordures ménagères ou

le magasin dans lequel vous avez acquis l’équipement.

8 TASCAM Model 16

Précautions concernant les appareils sans l

Conformité de l’émetteur radio et

interférences

Ce produit a une fonction d’émetteur large bande utilisant la

bande des 2,4GHz.

Plage de fréquences utilisée : 2400MHz – 2480MHz

Puissance maximale d’émission: Bluetooth® de classe 2 (moins

de 2,5mW)

Veuillez n’utiliser cet appareil que dans le pays où il a été acheté.

Selon le pays, des restrictions d’usage de la technologie sans l

Bluetooth peuvent exister.

Modèle pour le Canada

Conformité de l’émetteur radio

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

1) l’appareil ne doit pas produire de brouillage;

2) l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le

fonctionnement.

Marquage d’autorisation

IC: 1559C-MODEL16

Conformité de brouillage

Marquage d’autorisation

CAN ICES-3(B)/NMB-3(B)

Modèle pour l’EEE

(Espace économique européen)

Par la présente, TEAC Corporation déclare que

ce type d’équipement radio est en conformité

avec la directive 2014/53/UE, et avec les autres

directives et règlements de la Commission.

Le texte intégral de la déclaration de conformité pour l’UE est

disponible à l’adresse internet suivante (veuillez nous contacter

par e-mail).

https://www.tascam.eu/en/kontakt.html

Importateur pour l’UE: TEAC EUROPE GmbH.

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Allemagne

Exigences relatives à l’exposition aux

rayonnements

Cet équipement satisfait la réglementation reconnue à l’échelle

internationale en matière d’exposition humaine aux ondes

radioélectriques générées par l’émetteur.

Déclaration de conformité

Modèle pour le Canada

Cet équipement est conforme aux limites d’exposition aux

radiofréquences établies pour un environnement non contrôlé

par le CNR-102 d’IC.

Modèle pour USA/Canada

Cet équipement est conforme aux limites d’exposition au

rayonnement xées par la FCC/IC pour un environnement

non contrôlé, et répond aux directives d’exposition aux

radiofréquences (RF) de la FCC et aux règles CNR-102

d’exposition aux radiofréquences de l’IC. Cet équipement émet

une énergie RF très faible qui est considérée conforme sans

évaluation de l’exposition maximale autorisée. Cependant, cet

équipement doit être installé et utilisé en gardant une distance

de 20 cm ou plus entre le dispositif rayonnant et le corps (à

l’exception des extrémités: mains, poignets, pieds et chevilles).

Modèle pour l’EEE (Espace économique européen)

Cet équipement est conforme à la norme EN.62311: Évaluation

des équipements électroniques et électriques en relation

avec les restrictions d’exposition humaine aux champs

électromagnétiques; la norme harmonisée de la Directive

2014/53/UE.

TASCAM Model 16 9

FRANÇAIS

10 TASCAM Model 16

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGAS ELÉCTRICAS, NO QUITE LA CARCASA (NI

LA TAPA TRASERA) DENTRO DE LA UNIDAD NO HAY PIEZAS QUE PUEDAN SER REPARADAS POR EL

USUARIO.

El símbolo de un rayo dentro de un triángulo equilátero se usa internacionalmente para alertar al

usuario de la presencia de “voltajes peligrosos” no aislados dentro de la carcasa del aparato que

pueden ser de magnitud suciente para constituir un riesgo real de descarga eléctrica para las

personas.

El símbolo de exclamación dentro de un triángulo equilátero se utiliza para advertir al usuario

de la existencia de importantes instrucciones de uso y mantenimiento (reparaciones) en los

documentos que acompañan a la unidad.

CUIDADO: PARA EVITAR EL RIESGO DE INCENDIOS O

DESCARGAS ELÉCTRICAS, NO EXPONGA ESTE APARATO A

LA LLUVIA O LA HUMEDAD.

Para EE.UU.

Declaración de conformidad

Modelo: Model 16

Fabricante: TASCAM

Responsable: TEAC AMERICA, INC.

Dirección: 10410 Pioneer Blvd. Suite #1,

Santa Fe Springs, California

90670, U.S.A.

Teléfono: 1-323-726-0303

Este dispositivo cumple con lo indicado en la sección 15 de

las normas FCC y su funcionamiento está sujeto a las dos

condiciones siguientes: (1) este aparato no debe producir

interferencias molestas, y (2) este aparato debe aceptar

cualquier interferencia que reciba, incluso aquellas que

produzcan un funcionamiento no deseado.

PARA EL USUARIO

Se ha vericado que este aparato cumple con los límites

establecidos para las unidades digitales de clase B, de acuerdo

a lo indicado en la sección 15 de las normas FCC. Esos límites

han sido diseñados para ofrecer una protección razonable

contra las interferencias molestas en una instalación no

profesional. Este aparato genera, usa y puede irradiar energía

de radiofrecuencias y, si no es instalado y usado de acuerdo a

este manual de instrucciones, puede producir interferencias

molestas en las comunicaciones de radio. No obstante,

tampoco hay garantías de que no se produzcan ese tipo de

interferencias en una instalación concreta. Si este aparato

produce interferencias molestas en la recepción de la radio

o TV (lo que puede determinar encendiendo y apagando el

aparato), el usuario será el responsable de tratar de corregirlas

usando una o más de las siguientes medidas.

a) Reorientar o reubicar la antena receptora.

b) Aumentar la separación entre este aparato y el receptor.

c) Conectar este aparato a una salida de corriente o regleta

diferente a la que esté conectado el receptor.

d) Consultar a su distribuidor o a un técnico especialista en

radio/TV para que le ayuden.

PRECAUCIÓN

Cualquier modicación en este aparato no aprobada

expresamente y por escrito por TEAC CORPORATION podrá

anular la autorización del usuario a usar dicho aparato.

En Norteamérica/Canadá utilice solo fuentes de

alimentación de 120 V.

Este aparato cumple con todos los requisitos

establecidos por las Directivas Europeas, así

como por otras Regulaciones de la Comisión

Europea.

TASCAM Model 16 11

ESPAÑOL

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Preste atención a todos los avisos.

4. Siga todo lo indicado en las instrucciones.

5. No utilice este aparato cerca del agua.

6. Limpie este aparato solo con un trapo seco.

7. No bloquee ninguna de las aberturas de ventilación.

Instale este aparato de acuerdo con las instrucciones del

fabricante.

8. No instale este aparato cerca de fuentes de calor como

radiadores, calentadores, hornos o cualquier otro aparato

(incluyendo amplicadores) que produzca calor.

9. No anule el sistema de seguridad que supone un enchufe

de corriente polarizado o con toma de tierra. Un enchufe

polarizado tiene dos bornes de distinta anchura. Uno con

toma de tierra tiene dos bornes iguales y una lámina para

la conexión a tierra. El borne ancho del primer tipo de

enchufe y la lámina del otro se incluyen para su seguridad.

Si el enchufe que se incluye con la unidad no encaja en

su salida de corriente, haga que un electricista cambie su

salida anticuada.

10. Coloque el cable de corriente de forma que no pueda

quedar aplastado o retorcido, especialmente allí donde

estén los conectores, receptáculos y en el punto en que el

cable sale del aparato.

11. Utilice solo accesorios/complementos que hayan sido

especicados por el fabricante.

12. Utilice este aparato solo con un bastidor, soporte, trípode o

supercie especicado por el fabricante o que se venda con

el propio aparato. Cuando utilice un bastidor con ruedas,

tenga cuidado al mover la combinación bastidor/aparato

para evitar posibles daños en caso de que vuelquen.

13. Desconecte de la corriente este aparato durante las

tormentas eléctricas o cuando no lo vaya a usar durante un

periodo de tiempo largo.

14. Consulte cualquier posible avería al servicio técnico ocial.

Este aparato deberá ser revisado cuando se haya dañado de

alguna forma, como por ejemplo si el cable de corriente o

el enchufe se ha roto, si se ha derramado cualquier líquido

o se ha introducido un objeto dentro de la unidad, si el

aparato ha quedado expuesto a la lluvia o la humedad, si no

funciona normalmente o si se ha caído al suelo.

• Este aparato recibe corriente nominal no operativa de la

salida de corriente AC aun cuando su interruptor POWER o

STANDBY/ON no esté en la posición ON.

• El enchufe de alimentación sirve como dispositivo de

desconexión, por lo que colóquelo de forma que siempre

pueda acceder a él fácilmente.

• Una presión sonora excesiva en los auriculares puede

producirle daños auditivos.

• Si experimenta cualquier tipo de problema con este aparato,

póngase en contacto con TEAC para una reparación. No

utilice de nuevo el aparato hasta que no haya sido reparado.

PRECAUCIÓN

• Los productos de Clase ! están equipados con una cable

de alimentación con un enchufe con toma de tierra. Por

este motivo, debe conectar el cable de alimentación de

este aparato a una salida de corriente que disponga de una

conexión a toma de tierra de seguridad.

PRECAUCIÓN

• Para evitar posibles daños auditivos, no utilice este

aparato a niveles de volumen excesivos durante

periodos de tiempo prolongados.

CUIDADO

• No permita que este aparato quede expuesto a

salpicaduras de ningún tipo.

• No coloque objetos que contengan líquidos, como jarrones,

encima de este aparato.

• No instale este aparato encastrado en una librería o mueble

similar.

• El aparato debe estar colocado lo sucientemente cerca de

la salida de corriente como para poder acceder al enchufe

en cualquier momento.

• Si este aparato utiliza pilas, dichas pilas (el bloque de pilas

o las pilas individuales instaladas) no deben ser expuestas a

niveles de calor excesivos como expuestas directamente a

la luz solar o sobre un fuego.

• AVISO para aquellos aparatos que usen pilas de litio

recambiables: existe el riesgo de explosión en caso de que

la pila sea sustituida por otra del tipo incorrecto. Sustituya

la pila únicamente por otra idéntica o equivalente.

Para los usuarios europeos

Eliminación de aparatos eléctricos y electrónicos y pilas

y/o acumuladores

(a) Nunca debe eliminar un aparato eléctrico o electrónico

y/o pilas/acumuladores junto con el resto de la basura

orgánica. Este tipo de aparatos deben ser depositados

en los “puntos limpios” creados a tal efecto por su

Ayuntamiento o por la empresa de limpieza local.

(b) Con la correcta eliminación de los aparatos eléctricos y

electrónicos y/o pilas/acumuladores estará ayudando a

ahorrar valiosos recursos y evitará a la vez todos los efectos

negativos potenciales tanto para la salud como para el

entorno.

(c) Una eliminación incorrecta de este tipo de aparatos y/o

pilas/acumuladores junto con la basura orgánica puede

producir efectos graves en el medio ambiente y en la salud

a causa de la presencia de sustancias potencialmente

peligrosas que pueden contener.

(d) El símbolo del cubo de basura tachado (WEEE)

indica la obligación de separar los aparatos

eléctricos y electrónicos y/o pilas/acumuladores

del resto de basura orgánica a la hora de

eliminarlos.

Si la batería o acumulador contiene una cantidad

superior de plomo (Pb), mercurio (Hg) y/o cadmio

(Cd) que los valores especicados en la Directiva

de pilas y baterías (2006/66/EC, 2013/56/EU),

aparecerán los símbolos de estas sustancias

químicas (Pb, Hg y/o Cd) debajo del símbolo del

cubo de basura tachado.

Pb, Hg, Cd

(e) Los llamados “puntos limpios” de recogida y retirada

selectiva de este tipo de productos y/o pilas/acumuladores

están disponibles para cualquier usuario nal. Para más

información acerca de la eliminación de este tipo de

elementos, póngase en contacto con el departamento

correspondiente de su Ayuntamiento, empresa de limpieza

o recogida de basuras o con el comercio en el que adquirió

este aparato.

12 TASCAM Model 16

Precauciones de aparatos inalámbricos

Conformidad para la emisión de radio e

interferencias

Este producto dispone de la función de emisor de banda amplia

y usa la banda de 2.4 GHz.

Rango de frecuencias usadas: 2400 – 2480 MHz

Potencia salida máxima: Bluetooth® Class 2 (inferior a 2.5 mW)

Utilice este aparato únicamente en el país o región en el que lo

haya adquirido. Dependiendo del país, es posible que existan

determinadas limitaciones al uso de la tecnología inalámbrica

Bluetooth.

Modelo para EE.UU.

Declaración de conformidad

Responsable: TEAC AMERICA, INC.

Dirección: 10410 Pioneer Blvd. Suite #1,

Santa Fe Springs, California

90670, U.S.A.

Teléfono: 1-323-726-0303

Este dispositivo cumple con lo indicado en la sección 15 de

las normas FCC y su funcionamiento está sujeto a las dos

condiciones siguientes: (1) este aparato no debe producir

interferencias molestas, y (2) este aparato debe aceptar

cualquier interferencia que reciba, incluso aquellas que

produzcan un funcionamiento no deseado.

Etiqueta de autorización

FCC ID: XEG-MODEL16

Modelo para la Unión Europea

Por la presente, TEAC Corporation declara

que el dispositivo de radio de este aparato

cumple con la Directiva 2014/53/EU., así como

otras Regulaciones y Directivas de la Comisión

Europea.

El texto completo de la declaración de conformidad para la EU

está disponible en la siguiente página web. En caso de dudas,

póngase en contacto con nosotros vía email.

https://www.tascam.eu/en/kontakt.html

Importador para la UE: TEAC Europe GmbH

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

Requisitos de exposición a radiaciones

Este aparato cumple con todas las normativas y regulaciones,

reconocidas internacionalmente, relacionadas con la exposición

de los seres humanos a las ondas de radio generadas por el

transmisor.

Declaración de cumplimiento

Modelo para EE.UU.

Este aparato cumple con los límites de exposición a

radiaciones expuestos en la FCC/IC en lo relativo a entornos no

controlados y cumple con las reglas generales de exposición a

radiofrecuencias.

Modelo para EE. UU./Canadá

Este aparato digital de clase B cumple con la Normativa

Canadiense ICES-003.

Este aparato cumple con los límites de exposición a

radiaciones expuestos en la FCC/IC en lo relativo a entornos no

controlados y cumple con las reglas generales de exposición

a radiofrecuencias (RF) FCC y con las normas de exposición a

radiofrecuencias (RF) RSS-102 del IC. Este equipo tiene niveles

muy bajos de energía de RF que quedan sobradamente por

debajo de los valores indicados en la evaluación de exposición

máxima (MPE). Aún así es recomendable que lo instale y utilice

con el emisor a una distancia mínima de 20 cm con respecto al

cuerpo de cualquier persona (excluyendo extremidades: manos,

brazos, pies y piernas).

Modelo para la Unión Europea

Este equipo cumple con la norma EN.62311; Evaluación

de equipos eléctricos y electrónicos en relación a las

restricciones en la exposición de las personas a los campos

electromagnéticos; standard armonizado por la DIRECTIVA

2014/53/EU.

TASCAM Model 16 13

ESPAÑOL

14 TASCAM Model 16

Contents

1 - Introduction ...................................................................... 17

Features .................................................................................................... 17

Items included with this product .................................................... 17

Conventions used in this manual.................................................... 17

Precautions for placement and use................................................ 18

Notes about power supply ................................................................ 18

Beware of condensation .................................................................... 18

Cleaning the unit .................................................................................. 18

About SD cards ...................................................................................... 18

Precautions for use .......................................................................... 18

SD card write protection................................................................ 18

Note about formatting ................................................................... 18

Bluetooth® ............................................................................................... 19

Profiles .................................................................................................. 19

Codecs .................................................................................................. 19

Content protection .......................................................................... 19

Transmission security ..................................................................... 19

Using the TEAC Global Site ................................................................ 19

Product registration ............................................................................. 19

About TASCAM customer support service .................................. 19

2 - Names and Functions of Parts ......................................... 20

Top panel ................................................................................................. 20

Analog input jack section.............................................................. 21

Input channel mixing section ...................................................... 22

Analog output jack section .......................................................... 23

Screen operation section .............................................................. 24

Built-in effects operation section ............................................... 25

Analog output adjustment section ........................................... 25

Rear panel ................................................................................................ 26

Home Screen .......................................................................................... 26

Meters Screen......................................................................................... 27

Meter Screen details ........................................................................ 28

Menu structure ...................................................................................... 28

Basic MENU screen operations ........................................................ 29

Menu operation procedures ........................................................ 29

3 - Preparation .......................................................................30

Connecting other equipment .......................................................... 30

Connecting microphones ............................................................. 31

Connecting guitars, basses and similar instruments........... 31

Connecting electronic devices and other audio

equipment .......................................................................................... 31

Connecting monitor speakers ..................................................... 31

Connecting headphones ............................................................... 31

Connecting a computer ................................................................. 31

Connecting with Bluetooth devices .......................................... 31

Inserting and removing SD cards ................................................... 32

Inserting SD cards ............................................................................ 32

Removing SD cards .......................................................................... 32

SD card write protection switches ............................................. 32

Turning the power on and off .......................................................... 32

Setting the built-in clock date and time ....................................... 33

Adjusting the display........................................................................... 33

Adjusting the display contrast .................................................... 33

Adjusting the display brightness ................................................ 33

Preparing an SD card for use ............................................................ 33

IMPORTANT SAFETY INSTRUCTIONS ..................................... 3

Wireless equipment precautions ........................................... 6

4 - Managing Songs ............................................................... 34

Viewing the song list ........................................................................... 34

Song Operation ..................................................................................... 34

Creating a New Song ........................................................................... 34

Loading Songs ....................................................................................... 35

Saving the current song ..................................................................... 35

Viewing song information ................................................................. 35

Clearing all marks ................................................................................. 35

Deleting songs ....................................................................................... 35

Protecting/unprotecting songs ....................................................... 36

Editing song names ............................................................................. 36

Editing text ......................................................................................... 36

Loading songs created on different TASCAM Model series

products ................................................................................................... 37

5 - Basic recording .................................................................38

Selecting the input source ................................................................ 38

Setting the MODE switch ................................................................... 38

Setting phantom power ..................................................................... 38

Monitoring .............................................................................................. 38

SIG indicators and level meters ....................................................... 39

Recording ................................................................................................ 39

Undoing operations ............................................................................. 40

Undoing the previous operation ................................................ 40

Using the built-in effects .................................................................... 40

Setting the built-in effect .............................................................. 40

6 - Recorder functions ...........................................................42

Locate function ...................................................................................... 42

Changing the playback position................................................. 42

Using the direct locate function to locate ............................... 42

Repeat playback function .................................................................. 42

Punch in/out function ......................................................................... 42

Using the footswitch to punch in/out ...................................... 42

Setting up the footswitch ............................................................. 43

Setting the footswitch polarity ................................................... 43

Automatic punch in/out function................................................... 43

Setting the punch in/out points ................................................. 43

Setting a pre roll point ................................................................... 44

Rehearsing punching in and out ................................................ 44

Using automatic punching in and out ..................................... 44

7 - Track editing ..................................................................... 45

Clearing tracks ....................................................................................... 45

Importing tracks .................................................................................... 45

Mixing down ........................................................................................... 46

Stereo mix export function ............................................................... 46

8 - Mark functions .................................................................. 47

Using mark functions .......................................................................... 47

Adding marks ......................................................................................... 47

Moving between marks ...................................................................... 47

Clearing individual marks .................................................................. 47

9 - Settings and Information .................................................48

Viewing information ............................................................................ 48

CARD Screen ...................................................................................... 48

SONG Screen ...................................................................................... 48

FIRMWARE Screen ............................................................................ 48

Setting the song name format ......................................................... 48

Setting the WORD item .................................................................. 48

Setting MIDI time code operation .................................................. 49

Restoring factory default settings .................................................. 49

Formatting SD cards ............................................................................ 49

Playing WAV files on SD cards (SD PLAY mode) ......................... 50

TASCAM Model 16 15

ENGLISH

Contents

Dimensional drawings / Dessins avec cotes /

Esquema de dimensiones ..................................................171

Block diagram / Schéma fonctionnel /

Diagrama de bloques .........................................................172

Level diagram / Schéma des niveaux /

Diagrama de niveles ...........................................................173

10 - Using a computer to transfer data ................................ 51

Connecting with a Computer ........................................................... 51

Disconnecting ................................................................................... 52

Loading WAV files from a computer ............................................... 52

11 - USB audio interface functions ....................................... 53

Installing the dedicated software ................................................... 53

Installing the Windows dedicated software ........................... 53

Installing the Mac dedicated software ..................................... 54

Working with Gatekeeper ............................................................. 54

Uninstalling the dedicated software ............................................. 56

Uninstalling the Windows dedicated software ..................... 56

Uninstalling the Mac dedicated software ............................... 56

Opening the Settings Panel .............................................................. 56

Windows .............................................................................................. 56

Mac ........................................................................................................ 56

Settings Panel overview ..................................................................... 56

Notification function ........................................................................... 57

Setting Sound Properties ................................................................... 57

Simultaneous ASIO/WDM playback ............................................... 57

USB audio mode ................................................................................... 58

Setting procedures for use with OBS Studio and other

streaming applications................................................................... 58

12 - Messages .........................................................................60

13 - Troubleshooting ............................................................. 62

14 - Specifications ..................................................................64

General ..................................................................................................... 64

Inputs and outputs ............................................................................... 64

Analog audio input and output ratings ................................... 64

Control input/output ...................................................................... 65

Computer system requirements ..................................................... 65

Windows .............................................................................................. 65

Mac ........................................................................................................ 65

iOS device ........................................................................................... 65

Supported audio drivers ................................................................ 65

Audio performance .............................................................................. 65

Bluetooth ................................................................................................. 66

Other ......................................................................................................... 66

16 TASCAM Model 16

1 - Introduction

Thank you very much for purchasing the TASCAM Model 16

Multitrack Live Recording Console.

Before using this unit, read this Owner’s Manual carefully so that

you will be able to use it correctly and enjoy working with it for

many years. After you have finished reading this manual, please

keep it in a safe place for future reference.

You can also download this Owner’s Manual from the TEAC

Global Site (http://teac-global.com/).

Features

o14 input analog mixer with 14 line and 10 mic inputs

oMultitrack recording and playback with 16-track recording

(14 input channels and MAIN MIX L/R bus)

oUSB audio interface functions built-in

i16 tracks (14 input channels and MAIN MIX L/R bus) can

be input to the computer

i14 track outputs and computer outputs can be assigned

to channel inputs

iSupports USB 2.0 audio with resolutions up to 24-bit and

48kHz sampling frequency

oAnalog compressors included on channel 1-8 inputs

o60mm faders enable precise adjustments

oLINE/INST (BAL) input jacks that support high impedance

(Hi-Z) on channels 1-2

oChannel inserts (INSERT) on channels 1-2

oMultiple buses include stereo main (MAIN MIX L/R bus), sub

(SUB L/R bus) and monitor (MONITOR OUT 1/2)

o3 AUX sends (MON 1/MON 2/FX)

oInput channels have 3-band semi-parametric EQs with

adjustable mid frequencies

o4-band semi-parametric equalizer for output

o16 TASCAM preset effects can be used for a variety of

applications

oMultitrack recording and playback possible using SD cards

oBluetooth® audio playback and recording supported

oPunching in and out function per track (including punching

in and out automatically and with footswitches)

oSD/SDHC cards and SDXC cards (Class 10 or more)

oMultiple footswitch functions available (select play/pause,

effect muting or punch in/out)

oCONTROL ROOM L/R and PHONES outputs built-in (levels can

be adjusted and PFL/AFL L/R bus monitoring can be enabled

separately)

Items included with this product

This product includes the following items.

Take care when opening the package to avoid damaging the

items. Keep the packing materials for transportation in the

future. Please contact the store where you purchased this unit

if any of these items are missing or have been damaged during

transportation.

oMain unit .................................................................................................x 1

oPower cord ..............................................................................................x 1

oOwner’s Manual (this document) including warranty ............x 1

Conventions used in this manual

In this manual, we use the following conventions:

oWhen we show characters that appear on the display, the

typeface looks like this: MENU .

oThe four buttons under the display are called the function

buttons. From left to right, they are shown as buttons F1,

F2, F3 and F4. Moreover, the functions at the bottoms of the

screens will be shown after the button names.

Examples: F1 button, F4 button

oSD/SDHC/SDXC memory cards are referred to as “SD cards”.

oComputers, portable audio devices and other equipment

connected to this unit using Bluetooth are called “Bluetooth

devices”.

oGroups of recorded data are referred to as “songs”.

oThe song that is currently selected is called the “current song”.

oInformation shown on a computer display is written like this:

OK .

oAs necessary, additional information is provided under TIP,

NOTE and CAUTION headings.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and describe special

cases.

ATTENTION

Failure to follow these instructions could result in damage to

equipment or lost data, for example.

VCAUTION

Failure to follow these instructions could result in injury.

TASCAM Model 16 17

ENGLISH

1 - Introduction

Precautions for placement and use

oThe operating temperature range of this unit is 5 - 35 °C.

oDo not install this unit in the following types of locations.

Doing so could make the sound quality worse or cause

malfunction.

Places with significant vibrations

Next to a window or in another location exposed to direct

sunlight

Near heaters or other extremely hot places

Extremely cold places

Very humid or poorly ventilated places

Very dusty places

oTo enable good heat dissipation, do not place anything on

top of the unit.

oDo not place this unit on top of a power amplifier or other

device that generates heat.

Notes about power supply

oInsert the included power cord all the way into the AC IN

connector.

oDo not connect a power supply other than one that is

AC100V - 240V (50/60Hz).

oHold the power cord by its plug when connecting or

disconnecting it.

Beware of condensation

Condensation could occur if the unit is moved from a cold place

to a warm place, it is used immediately after a cold room has

been heated or it is otherwise exposed to a sudden temperature

change.

To prevent this, or if this occurs, let the unit sit for one or two

hours at the new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe

with chemical cleaning cloths, thinner, alcohol or other

chemical agents. Doing so could damage the surface or cause

discoloration.

About SD cards

This unit uses SD cards for recording and playback.

This unit can use SD cards that are Class 10 or higher and

compatible with SD, SDHC or SDXC standards.

A list of SD cards that have been confirmed for use with this unit

can be found on our web site. Please access to a product page of

this product from the TEAC Global Site (http://teac-global.com)

to find the list or contact the TASCAM customer support service.

Precautions for use

SD cards are delicate media.

In order to avoid damaging SD cards, please take the following

precautions when handling them.

oDo not leave them in extremely hot or cold places.

oDo not leave them in extremely humid places.

oDo not let them get wet.

oDo not put things on top of them or twist them.

oDo not hit them.

oDo not remove or insert them during recording, playback,

data transmission or other access.

oWhen transporting them, put them into cases, for example.

SD card write protection

This unit writes track information to the media in order to

improve operation performance. Since, for example, setting

information cannot be written to SD cards that are write-

protected, settings will not be retained when the unit is

restarted and performance will be otherwise affected.

Note about formatting

SD cards formatted by this unit are optimized to improve

performance during recording. Use this unit to format the SD

cards to be used with it. Errors might occur when recording with

this unit using an SD card formatted by a computer or other

device.

18 TASCAM Model 16

1 - Introduction

Bluetooth®

This unit has a built-in Bluetooth audio receiver, and can input

sound played on a computer or portable audio device that

supports Bluetooth (Bluetooth device).

ATTENTION

The Bluetooth function of this unit is not guaranteed to

enable connection or operation with all Bluetooth devices.

Profiles

This unit supports the following Bluetooth profiles.

oA2DP (Advanced Audio Distribution Profile)

In order to transfer audio by Bluetooth, the Bluetooth device

must support A2DP.

Even if a Bluetooth device supports the same profiles, though,

its functions might differ according to its specifications.

Codecs

This unit supports the following codecs. It will automatically

select one of them during audio transfer.

oSBC

oAAC

The unit will select the appropriate codec to use according

to the codec compatibility of the other Bluetooth device and

communication conditions.

NOTE

iYou cannot select the codec to be used by pressing a button,

for example.

iDue to characteristics of Bluetooth wireless technology,

playback from this unit will be slightly delayed compared to

playback from the Bluetooth device.

Content protection

This unit supports SCMS-T as a form of content protection when

transmitting audio, so it can play protected audio.

Transmission security

This unit supports security functions during Bluetooth

transmission in accordance with the Bluetooth standard

specifications, but it does not guarantee the privacy of such

transmissions.

TEAC CORPORATION will bear no responsibility should an

information leak occur during transmission by Bluetooth.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global

Site:

http://teac-global.com/

In the TASCAM Downloads section, select the desired language

to open the Downloads website page for that language.

Product registration

Customers in the USA, please visit the following TASCAM

website to register your TASCAM product online.

https://tascam.com/us/

About TASCAM customer support

service

TASCAM products are supported and warrantied only in their

country/region of purchase.

To receive support after purchase, on the TASCAM Distributors

list page of the TEAC Global Site (http:// teac-global.com/),

search for the local company or representative for the

region where you purchased the product and contact that

organization.

When making inquiries, the address (URL) of the shop or

web shop where it was purchased and the purchase date are

required.

Moreover, the warranty card and proof of purchase might also

be necessary.

TASCAM Model 16 19

ENGLISH

2 - Names and Functions of Parts

Top panel

a Analog input jack section

Use this section to connect the input jacks for each channel

and to adjust the input levels.

b Input channel mixing section

Use this section to choose input sources for each channel,

adjust compressors and equalizers, and set levels sent to

each bus (MAIN MIX L/R, PFL/AFL L/R, MONITOR OUT 1/2, FX,

SUB L/R).

c Analog output jack section

Use this section to connect the output jacks and adjust the

output equalizer.

d Screen operation section

Use this section to operate the meter, home and MENU screens

shown on the display.

e Built-in effects operation section

Operate the built-in effects and adjust the output levels for

each output in this section.

f Analog output adjustment section

Adjust the output levels from the FX, MAIN OUTPUT, SUB

OUTPUT and CONTROL ROOM output connectors.

20 TASCAM Model 16

La page charge ...

Tascam 16 Le manuel du propriétaire

Tascam 16 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents