TOA WM-D5300 -C4/-C7/-G1/-H1 Manuel utilisateur

Marque: TOA

Modèle: WM-D5300 -C4/-C7/-G1/-H1

Catégorie: Microphones

Taper: Manuel utilisateur

Thank you for purchasing TOA’s Digital Wireless Transmitter.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

WM-D5300Digital Wireless transMitter

instrUCtiOn ManUal

English: page 1 Français: page 34

Deutsch: seite 18 Español: página 50

nOte regarDing tHe Use OF

tHe DeDiCateD BatterY anD its CHarger

The BC-2000 Battery Charger and the WB-2000-2 Rechargeable

Battery described in the instruction manual are not intended for use in

the U.S.A. and Canada, and are therefore not sold in those countries.

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS

......................................................................................................... 3

2. GENERAL DESCRIPTION ....................................................................................................... 5

3. FEATURES ................................................................................................................................. 5

4. HANDLING PRECAUTIONS .................................................................................................... 5

5. NOMENCLATURE AND FUNCTIONS ................................................................................... 6

6. PREPARING BATTERIES ........................................................................................................ 8

6.1. Battery Insertion .................................................................................................................... 8

6.2. Guide to Battery Operating Times ........................................................................................ 8

6.3. When Operating on Rechargeable Battery .......................................................................... 9

7. OPERATION ............................................................................................................................. 10

7.1. Preparing Microphone ......................................................................................................... 10

7.2. Using Transmitter ................................................................................................................ 11

8. FUNCTION SETTINGS .......................................................................................................... 11

8.1. Setting the Bank and Channel Numbers ............................................................................ 11

8.2. Performing Encryption Settings ......................................................................................... 12

8.3. Performing Code Settings (When Encryption Function Is OFF) ........................................ 14

8.4. Performing Transmission Output Changeover Switch Settings ......................................... 15

9. CONVENIENT FUNCTIONS

(MICROPHONE SENSITIVITY SELECTOR SWITCH SETTINGS)

.................................... 16

10. SPECIFICATIONS ................................................................................................................. 17

Accessories ............................................................................................................................. 17

Optional products .................................................................................................................... 17

1. SAFETY PRECAUTIONS

•Beforeuse,besuretocarefullyreadalltheinstructionsinthissectionforcorrectandsafe

operation.

•Besuretofollowalltheprecautionaryinstructionsinthissection,whichcontainimportant

warnings and/or cautions regarding safety.

•Afterreading,keepthismanualhandyforfuturereference.

When the Unit is in Use

•Besuretouseadedicatedbatterycharger

when recharging a battery. Using other

battery charger may cause the battery to

leakorexplode,resultinginare,personal

injury, property damage, and/or pollution.

•Topreventtheelectromagneticwavefrom

badlyinuencingmedicalequipment,make

sure to switch off the unit's power when

placing it in close proximity to the medical

equipment.

When the Unit is in Use

•Whentheunitisnotinusefor2weeksor

more, be sure to take the batteries out of the

unit because battery leakage may cause a

re, personal injury, or contamination of

environment.

•Makesuretoobservethefollowinghandling

precautionssothatareorpersonalinjury

does not result from leakage or explosion of

the battery.

· Do not short, disassemble, heat nor put

thebatteryintoare.

· Avoid using both new and old batteries

together.

· Never charge batteries of the type which

are not rechargeable.

· Do not solder a battery directly.

·Be sure to use the specied type of

batteries.

· Note correct polarity (positive and

negative orientation) when inserting a

battery in the unit.

· Avoid locations exposed to the direct

sunlight, high temperature and high

humidity when storing batteries.

Do not place the dry cell battery into charger.

Placing non-rechargeable batteries in the

charger may cause the battery to crack

resultinginareand/orharmtothebody.

When recharging, please only use the BC-

2000 Battery charger and WB-2000 Battery.

Do not use other battery types.

Whenthebatterybecomesinatedorleaks,

discontinue use and replace with new one

immediately.

If there’s any burning and/or peculiar smell

while charging the battery, please switch off

the power immediately.

CAUTION TO USER:

Changes or modications not expressly

approved by the party responsible for

compliance could void the user's authority to

operate the equipment.

IMPORTANT NOTE: To comply with the

FCC RF exposure compliance requirements,

no change to the antenna or the device is

permitted. Any change to the antenna or the

device could result in the device exceeding

the RF exposure requirements and void

user’s authority to operate the device.

Indicates a potentially hazardous situation

which, if mishandled, could result in death

or serious personal injury.

WARNING

Indicates a potentially hazardous situation

which, if mishandled, could result in

moderate or minor personal injury, and/or

property damage.

CAUTION

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

This device operates on a no-protection, no-interference basis. Should the user seek to

obtain protection from other radio services operating in the same TV bands, a radio licence is

required. For further details, consult Innovation, Science and Economic Development Canada’s

document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-

Power Radio Apparatus in the TV Bands.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Ce dispositif fonctionne selon un régime de non-brouillage et de non-protection. Si l’utilisateur

devait chercher à obtenir une certaine protection contre d’autres services radio fonctionnant

dans les mêmes bandes de télévision, une licence radio serait requise. Pour en savoir plus,

veuillez consulter la Circulaire des procédures concernant les clients CPC-2-1-28, Délivrance

de licences sur une base volontaire pour les appareils radio de faible puissance exempts de

licence et exploités dans les bandes de télévision d’Innovation, Sciences et Développement

économique Canada.

2. GENERAL DESCRIPTION

The WM-D5300 is a digital wireless transmitter to be used with the optional microphones, exclusively

for speech applications.

The transmitter is specially designed to be used in conjunction with TOA's WT-D5800 digital

wireless receiver.

3. FEATURES

•EmploysthePLL-synthesizersystem.

•TOA'suniquedigitalaudioprocessingtechnologyensureshighqualitysound.

•Digitaltransmission ishighlyresistantto radiointerference and noise,enabling clearer, more

stable communication.

•Whenusedforimportantconferencesorinotherhigh-securityvenues,TOA'suniqueencryption

software combines with digital transmission technology to prevent leakage of or eavesdropping

on sensitive information.

•Switchablemicrophonesensitivityallowstheunittobeusedinawiderangeofapplications.

•Powercanbesuppliedbyeitherthededicatedrechargeable(NiH2=nickel-hydrogen)batteryor

an AA alkaline battery. When replacing the rechargeable battery, use the optional TOA WB-2000-

2 (package of 2).

4. HANDLING PRECAUTIONS

•Donotexposetheunittorainoranenvironmentwhereitmaybesplashedbywaterorother

liquids, as doing so may result in unit failure.

•Neveropennorremovetheunitcasetomodifytheunit.ReferallservicingtoyournearestTOA

dealer.

•Takecarenottodroptheunitontotheoornorbumpitagainstahardobjectastheunitcouldfail.

•Donotplacetheunitinlocationsofhightemperature(ex.inanill-ventilatedcarinsummer)orhigh

humidity as the unit could fail.

•Donotusetheunitinlocationswhereitisexposedtoseawater.

•Toclean,useadrycloth.Whentheunitgetsverydirty,wipelightlywithaclothdampedinadilute

neutral cleanser, then wipe with a dry cloth. Never use benzine, thinner, or chemically-treated

cleaning towel.

•Avoidusingamobiletelephoneneartheunitinuse.Noisecouldbepickedup.

•Whenusingtwoormoreunits,keepthematleast50cmawayfromeachothertoavoidmalfunctions

or noise.

•Keeptheunitatleast3mawayfromthereceivingantenna.Usingtheunitincloseproximitytothe

antenna could result in malfunctions or noise.

5. NOMENCLATURE AND FUNCTIONS

[Front]

[Front (figure with the battery cover detached)]

[Battery cover internals

(switch – enlarged view)]

[Rear]

[Top]

OFF

4 5

1. Power switch [ON/OFF]

Power can be turned on by sliding the

power switch to the ON position, while it

can be turned off by sliding it back to the

OFF position.

2. Battery checker (green/orange/red)

Lit: Power ON

Unlit: Power OFF*

The remaining battery power is represented

by the color of the indicator.

Green: Battery power is at full charge.

Orange: Battery power depletion has

started.

Red: Battery power is almost depleted,

and battery replacement is

required.

* When the battery power is depleted, the

indicator will not light up.

Note

The transmitter does not transmit the signal

if the bank and channel selector switches

are set to the empty channel.

Inthiscase,theindicatorashesredand

green alternately.

3. Antenna

A transmission-type antenna.

4. Battery cover

When inserting batteries or when setting the

bank and channel, etc., the cover should be

slid in the direction of the downward arrow

(

) mark.

5. Microphone input jack

Firmly insert the input plug of the

microphone and lock it by turning the lock

knob to the right.

6. Body clip

Convenient for when you want to attach the

unit to your belt or chest pocket.

7. Maintenance port

Not used.

Note

Never open the rubber cover.

8. Battery compartment

Insert and use a dedicated rechargeable

battery or AA alkaline batteries.

9. Encryption indicator

Lit: Encryption ON

Unlit: Encryption OFF

10. Encryption setting switch

11. Microphone sensitivity selector switch

[H/L]

H:+10dB

L: 0 dB

12. Bank selector switch

Make sure that the transmitter is identical

to the wireless receiver in the bank number.

13. Channel selector switch

Make sure that the transmitter is identical

to the wireless receiver in the channel

number.

14. Code setting switch [0 – 9]

15. Transmission output changeover switch

[H/L]

H:10mW

L: 1 mW

6. PREPARING BATTERIES

The WM-D5300 can operate on both the optional rechargeable battery or replaceable dry batteries.

Please carefully read the corresponding sections for correct use.

6.1. Battery Insertion

Step 1. Turn off the power switch.

Step 2. Holdthetransmitterbodyandslidethebatterycovertotheright

to remove it.

Step 3. InsertanAAbatteryaccordingto(+)and(–)indicationsonthe

battery compartment.

For the rechargeable battery, use the optional TOA WB-2000-2

(package of 2).

For dry batteries, use either the supplied battery or commercial

AA alkaline batteries (LR6).

Step 4. Replace the battery cover.

6.2. Guide to Battery Operating Times

6.2.1. Remaining operating time

The color of the battery checker changes from green to orange

as battery consumption progresses, and to red if the battery

is further continuously used. When the battery checker turns

red, charge the battery if the dedicated rechargeable battery

is used. In the case of dry batteries, replace it with a new one.

Guide to the remaining operating time based on the battery

charge indicator status]

Battery checker status Remaining operating time

Lights green 2–8hours

Lights orange Less than 2 hours

Lights red Battery requires charge or replacement.

6.2.2. Continuous operating time

Guide to continuous operating times: Approx. 8 hours (for fully-charged dedicated rechargeable

battery or alkaline battery)

Note

Operating times may vary depending on usage conditions, such as ambient temperature.

OFF

Green Orange Red

HLHL

6.3. When Operating on Rechargeable Battery

Do not charge the unit with an alkaline dry battery installed.

Charge the dedicated rechargeable battery*.

Failuretoobservetheseinstructionscouldcausereorpersonal

injury due to a bursting battery.

* The optional TOA WB-2000-2 (package of 2).

CAUTION

Notes

•Whenoperatingonrechargeablebatteries,theoptionalBC-2000Batterychargerisrequired.

•Forrechargeablebatteries,besuretousetheoptionalWB-2000-2(packageof2).

•Avoidusingothermakesofrechargeablebatteries.

•WhenusingtheWB-2000rechargeablebatteryforthersttimeorwhenusingitafterithasbeen

stored for a long period of time, be sure to charge it before use.

•TheWB-2000batteryisdesignedtocyclethroughabout500chargesanddischarges.Whenthe

transmitter operation interval becomes extremely short after prolonged repeated use, change the

battery with a new one.

•Chargetherechargeablebatteryafterithasbeenfullyused.(Thewirelesstransmitterwillcontinue

to operate for approx. 8 hours per charge.) Frequent charging at short intervals may shorten the

operating life of the rechargeable battery.

[How to charge]

Step 1. Place the WB-2000 rechargeable battery in the wireless transmitter.

(See p. 8, "Battery Insertion.")

Step 2. Set the wireless transmitter's power switch to the OFF position.

Step 3. Fully insert the wireless transmitter into the microphone

receptacle of the BC-2000 Battery charger.

The BC-2000's charging indicator lights red and charging

begins.

Charging is completed in approximately 3 hours and the

BC-2000's full-charge indicator lights green.

•Iftheredchargingindicatordoesnotlightevenifthe

wireless transmitter has been inserted into the charger,

check to see if the transmitter has been correctly

inserted.

•Thewirelesstransmitterbecomeswarmaftercharging

completion, however this is not a failure.

•Whendisconnectingthewirelesstransmitterfromthe

charger,rmlyholdthechargersothatitdoesnotmove.

For more information, see the instruction manual

enclosed with the BC-2000 Battery charger.

BC-2000

Battery charger

WM-D5300

Digital wireless

transmitter

7. OPERATION

7.1. Preparing Microphone

The following optional microphones can be used. Purchase one of them separately.

Note

Be sure to switch OFF the transmitter's power switch before connecting or disconnecting the

microphone element. A loud noise may be produced if this is done with the power switched ON.

Clip

Plug lock

ø3.5 mm

1.3 m in length

Tie-clip attachment

Rotatable

Set the Microphone's narrow

portion in the tie-clip's holder.

Tie-clip attachment

Clip

Plug lock

1.3 m in length

ø3.5 mm

Plug lock

Gooseneck Windscreen*

Adjustable band

Frame

Microphoneø3.5 mm

Plug lock

Gooseneck Windscreen*

Frame

Microphoneø3.5 mm

[YP-M5300 Lavalier Microphone]

[YP-M5310 Lavalier Microphone]

[WH-4000A Headset Microphone] [WH-4000H Headset Microphone]

*WindscreensarealsoavailableasoptionalproductWH-4000S.

7.2. Using Transmitter

Step 1. Plug the microphone's plug into the input

connector as illustrated.

Step 2. Conrmthatthewirelessmicrophoneandthe

wireless receiver are identical in the bank and

channel number.

If not identical, turn the power switch to the

OFF position, then set the bank and channel

numbers to the same ones as the receiver.

Step 3. Turn the Power switch to the ON position.

Then, conrm the battery checker will light

green or orange.

Step 4. Turn the Power switch to the OFF position

after use.

8. FUNCTION SETTINGS

8.1. Setting the Bank and Channel Numbers

Step 1. Turn off the power switch.

Step 2. Detach the battery cover.

Step 3. Using the supplied screwdriver, set the bank

selector switch’s pointer to the desired number,

and set the channel selector switch’s pointer

likewise.

Step 4. Replace the battery cover.

Plug lock

Secure the connection with the plug lock.

Screwdriver

(accessory)

8.2. Performing Encryption Settings

To enhance security, the WM-D5300 is provided with an encryption setting function that prevents

leakage of transmitted information.

This function also has the advantage of eliminating radio interference if enabled. Before enabling

theencryptionsetting,besurethatbankandchannelsettingsarecompletedrst.

Note

In addition to the WM-D5300, the WT-D5800 Digital Wireless Receiver also requires setup.

Therefore, be sure to see the receiver's instruction manual as well.

8.2.1. Encryption settings summary

[Before use (preparatory operation for setting)]

Transmit an ID number from the wireless transmitter to the receiver. The ID number is randomly

selected on the wireless transmitter side. The ID number to be used is selected from an extensive

numberofcombinationsandcannotbedesignatedbytheoperator,norcanitbeidentiedfrom

outside.

[In use] (No operations required.)

When the receiver detects a signal from the wireless transmitter, it simultaneously reads the

transmitter's ID information, ensuring that only the audio of the wireless transmitter assigned with

the same ID number as the receiver can be output. Even if the bank/channel numbers are identically

set in an attempt to enable reception of a radio signal from outside, since no audio is output if the

ID number does not match, the possibility of leakage of transmitted information to the outside is

quite low.

[Encryption Setting ON/OFF Confirmation]

Step 1. After removing the battery cover, switch ON the transmitter power switch.

Step 2. ConrmthestatusoftheEncryptionindicator.

The setting is ON when the indicator is lit, and OFF when the indicator is unlit.

Note: The encryption setting is factory-preset to OFF.

Encryption indicator

Encryption setting

switch

8.2.2. Performing encryption settings

[Switching the Encryption function from OFF to ON]

See also the instruction manual enclosed with the WT-D5800 receiver.

Step 1. Enable the receiver's encryption function.

Step 2. With the battery cover removed, switch ON the transmitter power

switchandconrmthattheEncryptionindicatorisunlit.

If the indicator is lit, switch encryption from ON to OFF (see p. 14).

Step 3. Switch OFF the transmitter power switch.

Step 4. Switch ON the transmitter power switch while holding down the

transmitter's Encryption setting switch (continue holding until Step 6).

Conrmthatthetransmitter'sEncryptionindicatorisashing.

An ID number is transmitted while the transmitter's Encryption

setting switch is held down.

Step 5. Perform pairing setting at the receiver.

The receiver waits for the transmitter’s transmitted ID number for

as long as the Set key is held down. The "RECEIVING" indication

is displayed on the receiver's LCD screen until the ID number is

correctly received.

Step 6. AfterconrmingthattheLCDdisplayhasswitchedtothe"SUCCESS"

indication, release both the transmitter's Encryption setting switch

and the receiver's Set key.

Step 7. Conrmthatthetransmitter'sEncryptionindicatorislit.

The encryption setting is now ON.

Notes

•DonotswitchOFFthepowertothetransmitterorreceiverduringsetting.

•Holddownthetransmitter'sEncryption settingswitch andthereceiver's

Set key until the "SUCCESS" indication appears on the receiver's LCD

screen. If the transmitter's Encryption setting switch or the receiver's Set

key is released while the "RECEIVING" indication is displayed on the

receiver's screen, the receiver will not have correctly received the new ID

number, leaving the ID number unchanged from the previous value. To

match the receiver ID number with the transmitter ID number, switch OFF

the transmitter's encryption setting, then repeat Steps 1 – 7 above.

Tips

•TheIDnumberisupdatedwhentheencryptionisswitchedfromOFFtoONagain.(Theencryption

ON/OFF status and ID number are retained even if the power switch is switched OFF.)

•SettingscanbeperformedregardlessofwhetherthetransmitterorreceiverEncryptionsetting

switchwasdepressedrst.

•ThereceiverdoesnotoutputaudioduringIDnumbersetting,evenifitreceivesaradiosignalfrom

the transmitter.

Lit

Flashing

Unlit

[Switching the Encryption function from ON to OFF]

Step 1. With the battery cover removed, switch ON the transmitter power switch

andconrmthattheEncryptionindicatorislit.

Step 2. Switch OFF the power switch.

Step 3. Switch ON the transmitter power switch while holding down the

Encryption setting switch.

Note

Do not switch OFF the transmitter power switch during setting.

Step 4. ConrmthattheEncryptionindicatorhasextinguished,thenreleasethe

Encryption setting switch.

The encryption setting switches to OFF.

8.3. Performing Code Settings (When Encryption Function Is OFF)

8.3.1. Code setting summary

Bypresettingthespeciedcodebetweenthewirelesstransmitterandreceiver,audioisonlyoutput

when a digital signal received from the wireless transmitter has the same ID code as the receiver.

Even if another signal is received from an adjacent area, if the code does not match, audio is not

output.

Tenvarietiesofcodecanbeselected([0]–[9])forappropriateuse,dependingoncircumstances.

8.3.2. Code settings

Code is factory-preset to "0."

Note

Switch OFF the transmitter power switch when performing

settings. If the power switch is left ON, the codes will remain

unaffected even if the settings are manually changed.

Step 1. After removing the battery cover, switch ON the

transmitter power switch.

Step 2. ConrmthattheEncryptionindicatorisunlit.

If it is lit, switch encryption from ON to OFF, referring to

p. 13, "Switching the Encryption function from OFF to

ON."

Step 3. Switch OFF the power.

Step 4. Using the supplied screwdriver, set the code setting

switch to the desired code number.

Step 5. Replace the battery cover, as it was before.

This puts the code into the set state.

Step 6. Set the same code number for the receiver, as well.

For the setting method, see the instruction manual

enclosed with the receiver.

Screwdriver

(accesory)

Unit

Unlit

Lit

8.4. Performing Transmission Output Changeover Switch Settings

Transmissioncanbesetforeitheroftwooutputs:‘H’(10mW)or‘L’(1mW).

Theswitchisfactory-presettothe‘H’position.

Note

Be sure to turn the transmitter’s power switch OFF before performing settings.

Step 1. Conrm that the power switch is turned OFF, then

remove the battery cover.

Step 2. Using the supplied screwdriver, set the changeover

switch to the desired transmission output.

Set the switch to the ‘H’ position when using the

transmitter in a wide area.

If the same bank and channel are used in close

proximity in adjacent locations, set the switch to the

‘L’ position to shorten the radio wave transmission

range for each location to minimize interference.

Step 3. Securely replace the battery cover.

Screwdriver

(accesory)

Transmission output

changeover switch

9. CONVENIENT FUNCTIONS (Microphone Sensitivity Selector Switch Settings)

Microphonesensitivitycanbesetto"0dB"(H)or"−10dB"(L).

Notes

•SwitchOFFthepowerswitchwhenselectingthesensitivity.

•Avoidpositioningthemicrophonetooclosetothemouthorspeakinginaloudvoice,asthesound

couldbecomemuddledanddifculttounderstand.

•Sensitivityisfactory-presetto"L."

Step 1. Conrmthatthepowerswitchhasbeenswitchedoff,then

remove the battery cover.

Step 2. Using the supplied screwdriver, set the switch to the desired

sensitivity.

Step 3. Replace the battery cover, as it was before.

Microphone sensitivity

selector switch

Screwdriver

(accesory)

10. SPECIFICATIONS

Version WM-D5300 -C4, WM-D5300 -C7 WM-D5300 -G1 WM-D5300-H1

Frequency Range 794–832MHz

(794–806MHzforThailand)

606–636MHz 576–606MHz

Modulation type FSK

Channel Selectable 160 channels

(The number of channels may differ from country to country.)

RF Carrier Power Less than 50 mW

Maximum Input Level –18dB*(Sensitivity:L)/–28dB*(Sensitivity:H)

Audio Frequency

Response

100Hz–12kHz

Antenna Lamda/4 whip antenna

ID Selectable 10 patterns

Battery

WB-2000 rechargeable battery (option) or AA Alkaline dry cell battery

Battery Life Approx. 8 hours

Operating Temperature –10to+50°C(14to122°F)(exceptbattery)

OperatingHumidity 30to85%RH(nocondensation)

Finish Body: ABS resin, black, paint

Dimensions 62 (w) × 171 (h) × 19 (d) mm

(2.44" × 6.73" × 0.75")

62 (w) × 185 (h) × 19 (d) mm

(2.44" × 7.28" × 0.75")

Weight 90 g (0.2 lb) (with battery)

*0dB=1V

Note: Thedesignandspecicationsaresubjecttochangewithoutnoticeforimprovement.

• Accessories

Storage case .......................................................... 1

Screw driver (for setting) ........................................ 1

• Optional products

Unidirectional lavalier microphone: YP-M5300

Omnidirectional lavalier microphone: YP-M5310

Headsetmicrophone: WH-4000A,WH-4000H

Note

The WM-D5300 cannot communicate with the TRANTEC Wireless System (S4 and S5 Series) nor

with the TOA Analog Wireless System (WT-5800, WT-5805, and WT-5810 etc.).

WM-D5300

DIGITALER DRAHTLOSSENDER

BEDIENUNGSANLEITUNG

WirdankenIhnenfürdenKaufdiesesdigitalenDrahtlossendersvonTOA.

Beachten Sie bitte die Anweisungen in dieser Bedienungsanweisung, um einen langen und störungsfreien

Betrieb des Geräts zu gewährleisten.

INHALTSVERZEICHNIS

1. SICHERHEITSHINWEISE

...................................................................................................... 20

2. ALLGEMEINE BESCHREIBUNG ......................................................................................... 21

3. LEISTUNGSMERKMALE ....................................................................................................... 21

4. VORSICHTSMASSNAHMEN BEI DER HANDHABUNG .................................................. 21

5. BEZEICHNUNGEN UND FUNKTIONEN ............................................................................. 22

6. VORBEREITEN DER BATTERIE .......................................................................................... 24

6.1. Einsetzen der Batterie ......................................................................................................... 24

6.2. Leitfaden zur Batterie-Betriebsdauer ................................................................................. 24

6.3. Bei Betrieb mit einem Akku ................................................................................................ 25

7. BEDIENUNG ............................................................................................................................ 26

7.1. Vorbereiten des Mikrofons ................................................................................................... 26

7.2. Verwenden des Senders ..................................................................................................... 27

8. FUNKTIONSEINSTELLUNGEN ............................................................................................ 27

8.1.EinstellenderFrequenzbank-undKanalnummer .............................................................. 27

8.2. Vornehmen von Verschlüsselungseinstellungen ............................................................... 28

8.3. Durchführen von Code-Einstellungen (bei deaktivierter Verschlüsselungsfunktion) ........ 30

8.4. Einstellen des Sendeleistungsumschalters ........................................................................ 31

9. WEITERE FUNKTIONEN (MIKROFONEMPFINDLICHKEITS-WÄHLSCHALTER) ....... 32

10. TECHNISCHE DATEN .......................................................................................................... 33

Zubehör .................................................................................................................................... 33

Optionales Zubehör ................................................................................................................. 33

1. SICHERHEITSHINWEISE

•Lesen Sie vor der Inbetriebnahme unbedingt alle Anweisungen in diesem Abschnitt

aufmerksam durch, damit ein korrekter und sicherer Betrieb gewährleistet ist.

•Folgen Sie unbedingt allen Vorsichtsmaßregeln in diesem Abschnitt, die wichtige, die

Sicherheit betreffende Warn- und/oder Vorsichtshinweise enthalten.

•BewahrenSiedieseAnleitungnachdemLesenzurspäterenBezugnahmegriffbereitauf.

Beim Gebrauch des Geräts

•

Verwenden Sie zum Laden eines Akkus unbedingt das

spezielle Ladegerät Bei Verwendung eines anderen

Ladegeräts kann die Batterie auslaufen oder explodieren,

waseinenBrand,eineKörperverletzung,einenSachschaden

oder Umweltverschmutzung zur Folge haben kann.

•Das Gerät bitte nach Gebrauch immer

ausschalten. Insbesondere ist darauf zu

achten, dass es zu keiner gegenseitigen

Beeinussung mit medizintechnischen

Geräten kommt.

Beim Gebrauch des Geräts

•

Wenn das Gerät voraussichtlich 2 Wochen oder

länger nicht gebraucht wird, entfernen Sie unbedingt

die Batterien aus dem Gerät, da diese anderenfalls

auslaufen und einen Brand, eine Verletzung oder

Umweltverschmutzung verursachen könnte.

•

Achten Sie darauf, dassbei der Handhabung die

nachstehenden Vorsichtsmaßregeln eingehalten

werden, um einen Brand oder eine Verletzung durch

Auslaufen oder Bersten der Batterie zu vermeiden.

·DieBatterienichtkurzschließen,zerlegen,

erhitzen oder verbrennen.

· Neue und alte Batterien nicht zusammen

verwenden.

·Niemalsversuchen,nichtwiederauadbare

Batterien zu laden.

· Batterien nicht fest anlöten.

· Unbedingt Batterien des vorgeschriebenen

Typs verwenden.

· Beim Einlegen der Batterie in das Gerät

auf korrekte Ausrichtung der Batteriepole

(Plus und Minus) achten.

· Batterien nicht an Orten aufbewahren, wo sie

direktem Sonnenlicht, hohen Temperaturen

und hoher Luftfeuchtigkeit ausgesetzt sind.

Legen Sie keine Batterien in das Ladegerät ein.

WennnichtwiederauadbareBatterienindasLadegerät

gelegt werden, können sie bersten und einen Brand

und/oder eine Verletzung verursachen.

VerwendenSiezumWiederauadenausschließlichdas

Ladegerät BC-2000 und die Akkus WB-2000.

Verwenden Sie keine anderen Typen.

Sollte die Batterie anschwellen oder auslaufen, sehen

Sie sofort von einer weiteren Nutzung ab und ersetzen

sie durch eine neue.

Sollte sich beim Laden der Akkus Rauch und/oder ein

ungewöhnlicher Geruch entwickeln, schalten Sie das

Gerät unverzüglich aus.

WARNHINWEIS:

Jeder Versuch, Änderungen oder

Modikationen am Gerät vorzunehmen, die

nicht von der zuständigen Stelle genehmigt

wurden, kann zu Schäden am Gerät und zum

Erlöschen der Betriebserlaubnis für das Gerät

führen.

Macht auf eine potenziell gefährliche Situation aufmerksam.

Die Nichtbeachtung der Warnhinweise kann zu Verletzungen,

möglicherweise auch mit tödlichem Ausgang, führen.

WARNUNG

Macht auf eine potenziell gefährliche

Situation aufmerksam. Die Nichtbeachtung

dieserHinweisekannzuleichten

Verletzungen oder Sachschäden führen.

ACHTUNG

La page charge ...

TOA WM-D5300 -C4/-C7/-G1/-H1 Manuel utilisateur

Marque: TOA

Modèle: WM-D5300 -C4/-C7/-G1/-H1

Catégorie: Microphones

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: TOA WM-D5300 -C4/-C7/-G1/-H1 Manuale utente
English: TOA WM-D5300 -C4/-C7/-G1/-H1 User manual
español: TOA WM-D5300 -C4/-C7/-G1/-H1 Manual de usuario
Deutsch: TOA WM-D5300 -C4/-C7/-G1/-H1 Benutzerhandbuch

TOA WM-D5300 -C4/-C7/-G1/-H1 Manuel utilisateur

TOA WM-D5300 -C4/-C7/-G1/-H1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents