AEG 88101KF-N96D Manuel utilisateur

88101K

Ceramic glass induction hob

Table de cuisson vetrocéramique à induction

Glaskeramische inductie-kookplaat

Installation and Operating Instructions

Instructions de montage et mode d’emploi

Montage- en gebruiksaanwijzing

2

Dear Customer,

Please read these user instructions carefully and keep them to refer to

later.

Please pass the user instructions on to any future owner of the appli-

ance.

The following symbols are used in the text:

1 Safety instructions

Warning! Information that affects your personal safety.

Important! Information that prevents damage to the appliance.

3 Useful tips and hints

2 Environmental information

3

Contents

Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting the heat setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 10

Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cookware for induction cooking zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4

Operating Instructions

1 Safety instructions

3

Please comply with these instructions. If you do not, any damage re-

sulting is not covered by the warranty.

5 This appliance conforms with the following EU Directives:

– 73/23/EEC dated 19.02.1973 Low Voltage Directive

– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending

Directive 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Correct use

• This appliance should be used only for normal domestic cooking and

frying of food.

• The appliance must not be used as a work surface or as a storage sur-

face.

• Additions or modifications to the appliance are not permitted.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

General safety

• The appliance may only be installed and connected by trained, regis-

tered service engineers.

• Built-in appliances may only be used after they have built in to suita-

ble built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ce-

ramic (cracks, scratches or splits), the appliance must be switched off

and disconnected from the electrical supply, to prevent the possibility

of an electric shock.

• Repairs to the appliance must only be carried out by trained regis-

tered service engineers.

5

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of

the appliance or hot cookware.

• Overheated fats and oils can ignite quickly. When cooking with fat or

oil (e.g. chips) do not leave the appliance unattended.

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at

least 30 cm from induction cooking zones that are switched on.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or

high-pressure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by

the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bot-

toms can scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass

ceramic and should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cook-

ware.

• The ventilation gap of 5mm between the worktop and front of the

unit underneath it must not be covered.

6

Description of the Appliance

Cooking surface layout

Control panel layout

Induction cooking zone 1800 W

with power function 2300 W

I

n

d

uct

i

on coo

ki

ng zone 2400

W

with power function 3200W

I

n

d

uct

i

on coo

ki

ng zone 1800

W

with power function 2300 W

Induction cooking zone 1200W

with power function 1500 W

Control

panel

On/Off

with power indicator

Heat setting selection

Lock

Timer display

Display

Cooking zone indicators

Timer function

Power function

STOP+GO

Timer

7

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions

are controlled by touching sensor fields and confirmed by displays and

acoustic signals.

Touch the sensor fields from above, without covering other sensor

fields.

Sensor field Function

On / Off To switch the appliance on and

off

Increase settings Increasing heat setting/time

Decrease settings Decreasing heat setting/time

TIMER Timer Timer selection

Lock Locking/unlocking the control

panel

Power Switching the power function on

and off

Stop+Go To switch the Keep Warm setting

on/off

8

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off,

the cooking zones need some time to cool down. Look at the residual

heat indicator

h .

3 Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking di-

rectly in the base of the cookware. The glass ceramic is merely heated

by the residual heat of the cookware.

The cooling fan switches itself on and off depending upon the temper-

ature of the electronics.

Display Description

¾ Cooking zone is switched off

u Keep warm setting Keep warm setting/STOP+GO

function is set

¿ - Ç Heat settings Heat setting is set

2 - 6 Heating setting plus

decimal point

Intermediate heat setting is set

a Automatic warm up

function

Automatic warm-up function is

activated

e Fault Malfunction has occurred

f Pan detection Cookware is unsuitable or too

small or no cookware has been

placed on the cooking zone

h Residual heat Cooking zone is still hot

l Child safety device Lock/child safety device is en-

gaged

p Power Power function is switched on

_ Safety cut-out Safety cut-out has been activated

9

Operating the appliance

3

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

3 After switching on, within approx. 10 seconds a heat setting or a func-

tion must be set, otherwise the appliance automatically switches itself

off.

Setting the heat setting

Control panel Display Pilot light

Switch on Touch for 2 seconds ¾ lights up

Switch off Touch for 1 second h / none goes out

Control panel Display

Increase Touch u to Ç / p

Decrease Touch Ç to ¾

Switch off Touch and at the same time ¾

10

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that

are switched on to the keep warm setting and then back to the heat

setting that was previously set. This function can be used to briefly in-

terrupt and then continue the cooking process e.g. to take a telephone

call.

3 Timer functions are not stopped by STOP+GO.

3 STOP+GO locks the whole control panel except the sensor field .

Using the automatic warm-up function

All cooking zones are equpped with an automatic warm up function

When setting a heat setting using , when starting from

¾, the cook-

ing zone switches to full power for a certain amount of time and then

automatically switches back to the heat setting set.

3 If during the automatic warm up a a higher heat setting is selected,

e.g. from

Á to Ã, the automatic warm up is adjusted.

3 If there is still residual heat on the cooking zone (display h), the auto-

matic warm up is not performed.

Control panel Display

To switch

on

Touch STOP+GO u

To switch

off

Touch STOP+GO heat setting that was previ-

ously set (not automatic

warm up function)

Control

panel

possible

heat set-

tings

Display

Switch on

(only when starting at

¾)

Touch ¿ to Æ a (after 5 sec-

onds)

Switch off Touch Æ to ¿ / u Æ to u

Not used Touch Ç to u Ç to u

11

The length of time that the automatic warm up function operates de-

pends on the heat setting selected.

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can

be locked at any time in order to prevent the settings being changed

e.g. by wiping over the panel with a cloth.

3 When you switch the appliance off, the locking function is automati-

cally switched off.

Heat

setting

Length of the

automatic warm

up [min.]

Interme-

diate

heat set-

ting

Length of the

automatic warm

up [min.]

v 0

1 1

2 1.7 2. 3

3 4.8 3. 5.5

4 6.5 4. 8.2

5 10.2 5. 12.3

6 2 6. 2.5

7 3.5

8 4.5

9 ---

Control panel Display

Switch on Touch l (for 5 seconds)

Switch off Touch previously set heat setting

12

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Setting the child safety device

Releasing the child safety device

Overriding the child safety device

The child safety device can be released in this way for a single cooking

session; it remains activated afterwards.

Step Control panel Display/Signal

1. Switch on the appliance

(Do not set a heat setting)

¾

2. Touch until the signal sounds Acoustic signal

3. Touch l

Appliance switches off.

Step Control panel Display/Signal

1. Switch on the appliance l

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off.

Step Control panel Display/Signal

1. Switch on the appliance l

2. Touch and at the same time ¾ / acoustic signal

Until the appliance is next switched off, it can used as normal.

13

Switching the power function on and off

The power function makes more power available to the cooking

zones, e.g. to bring a large quantity of water to the boil quickly.

The power function is activated for 10 minutes. After that the cooking

zone automatically switches back to heat setting 9.

Power Management

The cooking zones have a maximum

power available to them.

If this power range is exceeded by

switching on the power function,

Power Management reduces the

heat setting of another cooking

zone.

The display for this cooking zone al-

ternates for two minutes between

the set heat setting and the maxi-

mum possible heat setting. Thereaf-

ter the actual heat setting is

displayed.

Example:

3 If the power function has ended, the cooking zones automatically

switch back to the heat setting set previously.

Control panel Display

Switch on Touch p

Switch off Touch Ç

Touch Ç

Last

cooking zone

switched on

Other cooking zone

set

heat setting

set

heat set-

ting

display actual

heat setting

p 9 6 alternating with 9 6

14

Using the timer

All cooking zones can use each use one of the two timer functions at

the same time.

3 If a cooking zone is switched off, the timer function set is also switched

off.

3 If a heat setting is set on this cooking zone in addition to a countdown

timer, the cooking zone is switched off after the time set has elapsed.

Selecting a cooking zone

3 If the pilot light is flashing more slowly, the heat setting can be set or

modified.

Function Condition Outcome after the

time has elapsed

Safety cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone

switches off

Countdown timer cooking zones not in use acoustic signal

00 flashes

Step Control panel Display

1. Touch TIMER once Pilot light of the first

cooking zone flashes

2. º Touch TIMER once Pilot light of the second

cooking zone flashes

3. Touch TIMER once Pilot light of the third

cooking zone flashes

4. Touch TIMER once Pilot light of the fourth

cooking zone flashes

15

3 If other timer functions are set, after a few seconds the shortest re-

maining time of all the timer functions is displayed and the corre-

sponding pilot light flashes.

Setting the time

Switching off the timer function

Step Control panel field Display

1. TIMER Select cook-

ing zone

Pilot light of the cooking zone select-

ed flashes

2. Touch or for

the cooking zone se-

lected

00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. TIMER Select cook-

ing zone

Pilot light of the cooking zone select-

ed flashes faster

The time remaining is displayed

2. Touch for the

cooking zone select-

ed

The time remaining counts down to

00.

The pilot light goes out.

The timer function for the selected cooking zone is switched off.

16

Changing the time

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel field Display

1. TIMER Select cook-

ing zone

Pilot light of the cooking zone select-

ed flashes faster

The time remaining is displayed

2. Touch or for

the cooking zone se-

lected

01 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. TIMER Select cooking

zone

Pilot light of the cooking zone select-

ed flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch TIMER Acoustic signal to acknowledge.

Acoustic signal stops.

17

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for

a cooking zone within approx. 10 seconds, the cooking surface auto-

matically switches itself off.

• If one or more sensor fields are covered for longer than approx. 10

seconds, e.g. by a pan placed upon it, a signal sounds and the cooking

surface switches off automatically.

• If all cooking zones are switched off, the cooking surface automati-

cally switches itself off after approx. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel

immediately switches all cooking zones off.

Cooking zones

• In the event of overheating (e.g. when a pan boils dry) the cooking

zone automatically switches itself off. _ is displayed. Before being

used again, the cooking zone must be set to 0 and allowed to cool

down.

• If cookware that is not suitable is used, f flashes in the display and

after 10 minutes the display for the cooking zone switches itself off.

• If one of the cooking zones is not switched off after a certain time, or

if the heat setting is not modified, the relevant cooking zone switches

off automatically.

Heat setting Switches off after

v, 1 -2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

18

Tips on Cooking and Frying

3

Information on acrylamides

According to the latest scientific knowledge, intensive browning of

food, especially in products containing starch, can constitute a health

risk due to acrylamides. Therefore we recommend cooking at the lowest

possible temperatures and not browning foods too much.

Cookware for induction cooking zones

3 Cookware for induction cooking zones is labelled as suitable by the

manufacturer.

Test of suitability

Cookware is suitable for induction, if …

• ... a little water is heated on an induction cooking zone set to heat

setting 9 within a few seconds.

• ... a magnet sticks to the bottom of the cookware.

3 Certain cookware can make noises when being used on induction cook-

ing zones. These noises are not a fault in the appliance and do not af-

fect operation in any way.

Pan size

Induction cooking zones adapt automatically to the size of the cook-

ware bottom up to a certain limit. However the magnetic part of the

cookware bottom must have a minimum diameter depending upon the

size of the cooking zone.

3 On the 270 mm cooking zone, the minimum pan base diameter of 180

mm is marked by the inner circle.

3 The cookware must be placed centrally on the cooking zone.

Cookware made of suitable

Steel, enamelled steel yes

Cast iron yes

Stainless steel if appropriately labelled by the manufacturer

Aluminium, copper, brass ---

Glass, ceramic, porcelain ---

19

Tips on energy saving

2 Place cookware on the cooking zone before it is switched on.

2 If possible, always place a lid on the cookware.

Examples of cooking applications

The information given in the following table is for guidance only.

Heat

set-

ting

Cooking-

process

suitable for

Cooking

time

Tips/Hints

0 Off position

u

Keeping

food

warm

Keeping cooked foods

warm

as required Cover

1-2

Melting

Hollandaise sauce,

melting butter, chocolate,

gelatine

5-25 mins. Stir occasionally

Solidi-

fying

Fluffy omelettes, baked

eggs

10-40 mins. Cook with lid on

2-3

Simmer-

ing on

low heat

Simmering rice and milk-

based dishes

Heating up ready-cooked

meals

25-50 mins.

Add at least twice as

much liquid as rice, stir

milk dishes part way

through cooking

3-4

Steaming

Braising

Steaming vegetables, fish

braising meat

20-45 mins.

With vegetables add

only a little liquid (a

few tablespoons)

4-5 Boiling

Steaming potatoes 20-60 mins.

Use only a little liquid,

e. g.: max.

¼ l water

for 750 g potatoes

Cooking larger quantities

of food, stews and soups

60-150

mins.

Up to 3 l liquid plus in-

gredients

6-7

Gentle

Frying

Frying escalopes, veal

cordon bleu, cutlets, ris-

soles, sausages, liver, roux,

eggs, pancakes, dough-

nuts

Steady

frying

Turn halfway through

cooking

20

The power function is suitable for heating large quantities of liquid.

7-8

Heavy

Frying

Hash browns, loin steaks,

steaks, Flädle (pancakes

for garnishing soup)

5-15 mins.

per pan

Turn halfway through

cooking

9

Boiling

Searing

Deep

frying

Boiling large quantities of water, cooking pasta, searing meat

(goulash, pot roast), deep frying chips

Heat

set-

ting

Cooking-

process

suitable for

Cooking

time

Tips/Hints

La page charge ...

AEG 88101KF-N96D Manuel utilisateur

AEG 88101KF-N96D Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents