VTech CS6648-2 Manuel utilisateur

DECT 6.0 cordless telephone

User’s manual

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

lastet VTech product news.

CS6648-2

CS6648-3

CS6649

CS6649-2

CS6649-3

BC

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature operations

and troubleshooting necessary to install

and operate your new VTech telephone.

Please review this manual thoroughly to

ensure proper installation and operation

of this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com. In Canada,

please visit www.vtechcanada.com.

Telephones identified with this

logo have reduced noise and

interference when used with

most T-coil equipped hearing

aids and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of the

Telecommunications Industry

Association. Used under

license.

The ENERGY STAR

®

program

(www.energystar.gov)

recognizes and encourages

the use of products that save

energy and help protect our

environment. We are proud

to mark this product with

the ENERGY STAR

®

label

indicating it meets the latest

energy efficiency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

i

Table of contents

What’s in the box ........................................ 1

Overview...................................................... 2

Telephone base overview .............................2

Handset overview ..........................................4

Charger overview ..........................................5

Display icons overview ..................................5

Handset and telephone base indicators .......6

Connect ....................................................... 6

Connect the telephone base .........................6

Mount the telephone base.............................6

Install and charge the battery ........................7

Before use ................................................... 8

Set date and time ..........................................8

Check for dial tone ........................................8

Operating range ............................................9

Congure your telephone .......................... 9

Using the telephone base/handset menu .....9

Set language .................................................9

Set date and time ........................................10

Home area code ..........................................10

Dial mode ....................................................10

Temporary tone dialing ................................10

Telephone operations .............................. 11

Make a call .................................................. 11

Predial a call ................................................11

Answer a call ...............................................12

End a call .....................................................12

Speakerphone .............................................12

Volume ........................................................12

Mute ............................................................12

Transfer a call ..............................................13

Join a call in progress .................................13

Call waiting ..................................................13

Chain dialing ................................................14

Find handset................................................14

Multiple handset use ................................ 15

Intercom ......................................................15

Answer an incoming call during an

intercom call .............................................16

Call transfer using intercom ........................16

Redial list................................................... 18

Review a redial list entry .............................18

Dial a redial list entry ...................................18

Delete a redial list entry ...............................18

Directory .................................................... 19

Add a directory entry ...................................19

Review a directory entry ..............................20

Alphabetical search .....................................20

Dial a directory entry ...................................20

Edit a directory entry ...................................20

Delete a directory entry ...............................21

Speed dial.................................................. 21

Assign a speed dial number ........................21

Reassign a speed dial number ...................21

Dial a speed dial number ............................22

Delete a speed dial number ........................22

Caller ID ..................................................... 23

Review a caller ID log entry ........................23

Missed call indicator ....................................23

View dialing options.....................................23

Dial a caller ID log entry ..............................24

Save a caller ID log entry to the directory ...24

Delete caller ID log entries ..........................24

Sound settings .......................................... 25

Key tone ......................................................25

Ringer tone ..................................................25

Telephone base ringer volume ....................26

Handset ringer volume ................................26

Temporary ringer silencing ..........................26

Quiet mode ..................................................26

About the built-in answering system and

voicemail service .................................. 27

Set your built-in answering system ........ 28

Turn the answering system on or off ...........28

Default announcement ................................29

Record your own announcement ................29

Play your announcement ............................29

Delete your announcement .........................30

Set number of rings .....................................30

Set recording time .......................................30

Turn the call screening on or off ..................30

Turn the message alert tone on or off .........31

ii

Using your built-in answering system .... 31

Message capacity .......................................31

New message indication .............................31

Message playback ......................................32

Delete all old messages ..............................32

Remote access ...........................................33

Set your remote access code .....................33

Call screening..............................................34

Call intercept ...............................................34

Temporarily turn off the message

alert tone ..................................................34

Record, play and delete memos .................34

Use the built-in answering system and

voicemail service .................................. 35

Retrieve voicemail from telephone

service .................................................... 35

Retrieve voicemail .......................................35

Voicemail number ........................................35

Turn off the new voicemail indicators ..........36

Register a handset ................................... 37

Replace a handset .................................... 38

Other information ..................................... 38

Website .......................................................38

Screen messages ..................................... 39

General product care ............................... 41

Frequently asked questions .................... 41

The RBRC

®

seal ........................................ 44

FCC, ACTA and IC regulations ................ 45

California Energy Commission battery

charging testing instructions ............... 47

For C-UL compliance only ....................... 48

Limited warranty ....................................... 51

Technical specications .......................... 53

1

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

To purchase a replacement battery or power

adapter, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call

1 (800) 267-7377.

1 set for CS6648-2/CS6648-3/

CS6649/CS6649-2/CS66493-3

1 set for CS6649;

2 sets for CS6648-2/CS6649-2;

3 sets for CS6648-3/CS6649-3

1 set for CS6648-2/CS6649-2;

2 sets for CS6648-3/CS66493-3

1 set for CS6648-2/CS6648-3/

CS6649/CS6649-2/CS66493-3

What’s in the box

Abridged

user’s

manual

Important

safety

instructions

2

Overview

Telephone base overview

1 – LCD display

2 – IN USE light

On when the phone is in use, or

when the answering system is

answering an incoming call.

On when a handset is being

registered.

Flashes when there is an incoming

call.

Flashes when handsets are being

deregistered.

Flashes when another telephone

on the same line is in use.

3 – FLASH

During a call, press to answer an

incoming call when you receive a

call waiting alert.

CANCEL

While in a menu, press to cancel

an operation, back up to the

previous menu or exit the menu

display.

•

Press and hold to erase the

missed call indicator when the

phone is not in use.

While the phone is ringing,

press to silence the base ringer

temporarily.

CID

Press to scroll down while in

menus and lists.

While entering or modifying names

or numbers, press to move the

cursor to the left.

Press to view the caller ID log

when the base is not in use.

Press to scroll up while in menus

and lists.

While entering or modifying names

or numbers, press to move the

cursor to the right.

Press to review the directory when

the base is not in use.

MENU/SELECT

Press to show a menu.

While in a menu, press to select

an item, or save an entry or

setting.

INT

Press to initiate or answer an

intercom call, or to transfer a call.

FIND HANDSET

Press to page all handsets when

the phone is not in use.

4 – /PLAY/STOP

Press to start or stop message

playback.

Flashes when there are new

messages or memos in the

answering system.

•

a

b

c

d

e

fgh

i

j

k

l

3

X/DELETE

Press to delete the playing

message or playing

announcement.

While reviewing the redial list,

directory or caller ID log, press to

delete an individual entry.

While entering names or numbers,

press to delete a character or digit.

/REPEAT

Press once to repeat the playing

message.

Press twice to play the previous

message.

/SKIP

Press to skip to the next message

during message playback.

5 – MUTE

During a call, press to mute the

microphone.

While the phone is ringing,

press to silence the base ringer

temporarily.

VOL

During a call or message

playback, press to adjust the

listening volume.

Press to adjust the telephone base

ringer volume when the base is

not in use.

/ANS ON/OFF

Press to turn the built-in answering

system on or off.

REDIAL/PAUSE

Press repeatedly to view the last

10 numbers dialed.

Press and hold to insert a dialing

pause while dialing or entering

numbers.

•

/SPEAKER

Press to make, answer or end a

call.

During a call, press to switch

between the corded handset and

the base speakerphone.

6 –

Press and hold to set and turn on

the quiet mode, or turn it off.

Press repeatedly to display other

dialing options when reviewing a

caller ID log entry.

7 –

Press to enter space during text

editing.

8 –

Press to switch to tone dialing

during a call if you have pulse

service.

9 – MIC

Microphone.

10 – 1

While reviewing a caller ID log

entry, press repeatedly to add or

remove 1 in front of the telephone

number before dialing or saving it

in the directory.

Press and hold to set or dial your

voicemail number.

11 – Speakerphone

12 – Corded handset

•

4

Handset overview

1 – Handset earpiece

2 – LCD display

3 –

Show the menu.

While in a menu, press to select

an item or save an entry or setting.

4 –

Hang up a call.

Return to the previous menu

or idle mode without making

changes.

Delete digits while predialing.

Silence the handset ringer

temporarily while the phone is

ringing.

Press and hold to erase the

missed call indicator when the

phone is not in use.

•

5 –

Press and hold to turn on quiet

mode, or turn it off.

Press repeatedly to display other

dialing options when reviewing a

caller ID log entry.

6 – INT

Press to initiate or answer an

intercom call, or to transfer a call.

7 – MUTE/DELETE

Mute the microphone during a call.

Silence the handset ringer

temporarily while the phone is

ringing.

Delete the displayed entry while

reviewing the directory, caller ID

log or redial list.

Delete digits or characters when

entering numbers or names.

Delete the playing message or

playing announcement.

8 – Microphone

9 –

Press to make or answer a call.

During a call, press to

switch between the handset

speakerphone and the handset

earpiece.

10 –

Press to switch to tone dialing

during a call if you have pulse

service.

11 –

While reviewing a caller ID log

entry, press repeatedly to add or

remove 1 in front of the telephone

number before dialing or saving it

in the directory.

Press and hold to set or dial your

voicemail number.

•

a

b

c

d

e

f

g

h

i

j

k

l

m

n

5

Charger overview

1 – Charging pole

Display icons overview

Handset display icons

The battery icon flashes when

the battery is low and needs

charging.

The battery icon animates

when the battery is charging.

The battery icon becomes

solid when the battery is fully

charged.

The handset ringer is off.

There are new voicemail

received from your telephone

service provider.

ANS ON

The answering system is

turned on.

ECO

The ECO mode activates

automatically to reduce

power consumption when the

handset is within range from

the telephone base.

NEW

The entry you are reviewing is

new in the caller ID log.

1/13

The number of current playing

message and the total number

of messages recorded.

Telephone base display icons

The telephone base ringer is off.

There are new voicemail received

from your telephone service

provider.

NEW

The entry you are reviewing is

new in the caller ID log.

13

MSG#

The total number of messages

recorded when the telephone

base is not in use.

The number of the playing

message.

•

12 –

Press to make or answer a call.

During a call, press to answer an

incoming call when you receive a

call waiting alert.

13 – REDIAL/PAUSE

Review the redial list.

Press and hold to insert a dialing

pause while dialing or entering

numbers.

14 – CHARGE light

On when the handset is charging

in the handset charger.

•

6

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

NOTES

Use only the adapters provided.

Make sure the electrical outlets are not

controlled by wall switches.

The adapters are intended to be correctly

oriented in a vertical or floor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL filter (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider for

more information.

Connect the telephone base

Mount the telephone base

•

Handset and telephone base

indicators

Handset lights overview

On when the handset

speakerphone is in use.

CHARGE

On when the handset is

charging in the handset

charger.

Telephone base lights overview

IN USE

On when the telephone

line is in use.

On when the answering

system is answering a

call.

On when you are

registering a handset.

Flashes quickly when

there is an incoming call.

Flashes when another

telephone sharing the

same line is in use.

Flashes when you are

deregistering all handsets.

•

/ANS

ON/OFF

On when the answering

system is turned on.

/

SPEAKER

On when the base

speakerphone is on.

/PLAY/

STOP

Flashes when there are new

memos or messages in the

answering system.

MUTE

On when mute function is on.

7

Connect the charger and charge

the battery

Place the handset in the telephone base

or handset charger to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the table on next

page).

NOTES

For best performance, keep the handset

in the telephone base or charger when not

in use.

The battery is fully charged after 11 hours

of continuous charging.

If you place the handset in the telephone

base or the charger without plugging in

the battery, the screen displays

NO BATTERY.

•

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTES

Use only supplied battery.

Charge the battery provided with this

product only in accordance with the

instructions and limitations specified in this

manual.

If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

•

THIS SIDE UP

8

Battery

indicators

Battery

status

Action

The screen

is blank, or

displays Put

in charger

and flashes.

The battery

has no or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(about 30

minutes).

The screen

displays

Low battery

and flashes.

The battery

has enough

charge to

be used

for a short

time.

Charge

without

interruption

(about 30

minutes).

The screen

displays

HANDSET X.

The battery

is charged.

To keep

the battery

charged,

place it in

the handset

charger when

not in use.

When the battery is fully charged, you can

expect the following performance:

Operation

Operating

time

While in handset use

(talking*)

Up to 7 hours

While in speakerphone

mode (talking*)

Up to 3.5 hours

While not in use

(standby**)

Up to 5 days

* Operating times vary depending on your

actual use and the age of the battery.

** Handset is not charging or in use.

Before use

After you install your telephone or power

returns following a power outage, the

handset will prompt you to set the date

and time.

Set date and time

NOTE

Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

Use the dialing keys (0-9) to enter

the hour (HH) and minute (MM).

Then press or to choose AM or

PM.

Press SELECT to save.

Check for dial tone

Press . If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures

described above are properly done.

It may be a wiring problem. If you have

changed your telephone service to

digital service from a cable company

or a VoIP service provider, the

telephone line may need to be rewired

to allow all existing telephone jacks to

work. Contact your cable/VoIP service

provider for more information.

1.

2.

3.

•

9

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can vary

with the locations of the telephone base

and handset, the weather, and the layout

of your home or office.

When the handset is out of range, the

handset displays Out of range or no

pwr at base.

If there is a call while the handset is out

of range, it may not ring, or if it does ring,

the call may not connect well when you

press . Move closer to the telephone

base, then press to answer the call.

If the handset moves out of range during

a telephone conversation, there may be

interference. To improve reception, move

closer to the telephone base.

Configure your telephone

Using the telephone base/

handset menu

You can use the telephone base or

a cordless handset to change your

telephone settings.

Press MENU when the phone is not

in use.

Press or until the screen displays

the desired feature menu.

Press SELECT to enter that menu.

To return to the previous menu, press

CANCEL.

To return to idle mode, press and hold

CANCEL.

Set language

The LCD language is preset to English.

You can select English, French or

Spanish to be used in all screen

displays.

Press MENU when the handset/

telephone base is not in use.

Press or to scroll to Settings,

and then press SELECT twice.

Press or to choose English,

Français or Español, then press

SELECT.

4. Press SELECT twice to save your

setting. You hear a confirmation tone.

NOTE

If you accidentally change the LCD language

to French or Spanish, you can reset it to

English easily by pressing MENU then

entering 364

#

.

1.

2.

3.

•

1.

2.

3.

10

Set date and time

NOTE

Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

Press MENU when the handset/

telephone base is not in use.

Press or to scroll to Set date/

time, then press SELECT.

Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

Press SELECT to save the settings.

You hear a confirmation tone.

Home area code

If you dial your local calls using only

seven digits (area code not required),

you can program your home area code

so that when you receive a call within

your local area, the telephone number

is automatically stored without the area

code in the caller ID log.

Press MENU when the handset/

telephone base is not in use.

Press or to scroll to Settings,

then press SELECT.

Press or to scroll to Home area

code, then press SELECT.

Use the dialing keys (0-9) to enter a

three-digit home area code.

Press DELETE on the handset to

delete a digit.

Press and hold DELETE on the

handset to delete all digits.

Press X/DELETE on the telephone

base to delete all digits.

1.

2.

3.

4.

5.

1.

2.

3.

4.

•

5. Press SELECT to confirm. You hear

a confirmation tone.

NOTE

If, in the future, your telephone service

provider requires you to dial the area code

when making a local call, or, if you move to

a location that requires it, follow the steps

above to delete the home area code you

have already programmed. After you have

deleted the home area code, _ _ _ will appear

on the screen.

Dial mode

The dial mode is preset to touch-tone

dialing. If you have pulse (rotary) service,

you must change the dial mode to pulse

dialing before using the telephone to

make a call.

Press MENU when the handset/

telephone base is not in use.

Press or to scroll to Settings,

then press SELECT.

Press or to choose Dial mode,

then press SELECT.

Press or to choose Touch-tone

or Pulse, then press SELECT to

save your selection. You hear a

confirmation tone.

Temporary tone dialing

If you have pulse (rotary) service only,

you can switch from pulse to tone dialing

temporarily during a call. This is useful if

you need to send touch-tone signals to

access your telephone banking or long

distance services.

During a call, press TONE .

Use the dialing keys to enter the

number you wish to dial. The

telephone sends touch-tone signals.

It automatically returns to pulse

dialing mode after you end the call.

1.

2.

3.

4.

1.

2.

11

Telephone operations

Telephone base control key panel:

Handset control key panel:

Make a call

Using a cordless handset:

Press

or .

When you hear a dial tone, dial the

number.

Using the telephone base:

Lift the corded handset, or press /

SPEAKER.

When you hear a dial tone, dial the

number.

NOTE

The screen displays the elapsed time as

you talk (in hours, minutes and seconds).

Predial a call

Using a cordless handset:

Enter the telephone number using

the dialing keys (0-9).

Press DELETE or CANCEL to

make corrections.

2. Press or to dial.

NOTE

While entering numbers, press and hold

PAUSE to insert a dialing pause (a P

appears).

Using the telephone base:

Enter the telephone number using

the dialing keys (0-9).

Press X/DELETE to make

corrections.

2. Lift the corded handset, or press

/SPEAKER to dial.

While entering numbers, press

and hold PAUSE to insert a dialing

pause (a P appears).

If you make a predial call while the

telephone line is in use, the screen

displays Unable to call.

1.

2.

1.

2.

•

1.

•

1.

•

12

Answer a call

Using a cordless handset:

Press , or any of the dialing

keys.

Using the telephone base:

Lift the corded handset, or press

/SPEAKER or any of the dialing

keys.

End a call

Using a cordless handset:

Press OFF or place the handset in the

handset charger.

Using the telephone base:

When you are using the corded

handset, place it on the telephone

base.

When you are using the base

speakerphone, press

/SPEAKER.

Speakerphone

Handset speakerphone:

When the cordless handset is on a call,

press

to switch between the handset

speakerphone and the handset earpiece.

When the speakerphone is active, the

handset displays Speaker and the

light

turns on.

Telephone base speakerphone:

When the corded handset is on a call,

press

/SPEAKER to switch between

the telephone base speakerphone and

the corded handset.

When the speakerphone is active, the

telephone base displays Speaker and

the /SPEAKER light turns on.

•

1.

2.

Volume

To adjust the listening volume on

a cordless handset:

During a call, press /VOLUME or

/VOLUME.

To adjust the listening volume at

the telephone base:

During a call, press VOL or VOL .

NOTES

The handset earpiece volume and

speakerphone volume settings are

independent.

When the volume reaches the minimum or

maximum setting, you hear two beeps.

Mute

The mute function allows you to hear the

other party but the other party cannot

hear you.

To mute a call on a cordless

handset:

During a call, press MUTE. The

handset displays Muted until the

mute function is turned off.

Press MUTE again to resume the

conversation. The handset displays

Microphone on briefly.

To mute a call at the telephone

base:

During a call, press MUTE. The

telephone base displays Muted and

the MUTE light turns on until the

mute function is turned off.

Press MUTE again to resume the

conversation. The telephone base

displays Microphone on briefly.

•

1.

2.

1.

2.

13

Join a call in progress

Another handset or the telephone base

can join you on an outside call. That

call continues until all parties hang up.

You can use the telephone base and

a cordless handset, or two cordless

handsets at a time on an outside call.

You can buy additional expansion

handsets (CS6609) for this telephone

base. You can register up to five

handsets to the telephone base.

To join a call with a cordless handset:

When a handset or the telephone

base is already on a call, press or

on another handset to join the call.

Press OFF or place the handset in the

handset charger to exit the call. The

call continues until both devices

hang up.

To join a call with the telephone base:

Lift the corded handset or press

/SPEAKER.

Place the corded handset back to the

telephone base or press

/SPEAKER

to exit the call. The call continues until

both devices hang up.

Call waiting

If you subscribe to call waiting service

from your telephone service provider,

you hear an alert tone when there is an

incoming call while you are already on a

call.

Press FLASH to put your current call

on hold and take the new call.

Press FLASH to switch back and forth

between calls.

If you also subscribe to caller ID

service, it will let you see the name and

telephone number of the caller during

call waiting.

•

Transfer a call

While on an outside call, you can

transfer the call from a cordless handset

to another handset or to the telephone

base.

During a call, press MENU.

Press or to scroll to Transfer,

then press SELECT.

Your handset shows Transfer to:

Press 7 for the telephone base or 1-5

for HANDSET 1 to HANDSET 5.

The outside call is put on hold and

your handset shows Calling HS X/

Calling base, and then Transferred.

The destination device rings and

shows Incoming call.

4. To answer the call on the destination

handset, press , or any of the

dialing keys.

-OR-

To answer the call on the telephone

base, lift the corded handset, or

press /SPEAKER or any of the

dialing keys.

NOTES

If the destination device does not answer

the call within 30 seconds, the call will be

reverted to the originating device. If the

originating device does not answer the

reverted call within 30 seconds, the

call ends.

If the destination device is in the directory

or caller ID log, or is out of range, the

originating device displays Unable to call

and then reconnects to the outside call.

1.

2.

3.

•

14

It may be necessary to change your

telephone service to use this feature.

Contact your telephone service provide if:

You have both caller ID and call

waiting, but as separate service (you

may need to combine these service);

You have only caller ID service, or

only call waiting service; or

You do not subscribe to caller ID or

call waiting services.

There are fees for caller ID services. In

addition, services may not be available in

all areas.

Chain dialing

Use this feature on the cordless

handsets to initiate a dialing sequence

from numbers stored in the directory,

caller ID log or redial list while you are on

a call.

Chain dialing can be useful if you wish

to access other numbers (such as bank

account numbers or access codes) from

the directory, caller ID log or redial list.

To access a number from the

directory while on a call:

Press MENU.

Press SELECT to choose

Directory.

Press or to scroll to the desired

entry.

Press SELECT to dial the displayed

number.

To access a number from the

caller ID log while on a call:

Press MENU.

Press or to scroll to Caller ID

log, then press SELECT.

Press or to scroll to the desired

entry.

Press SELECT to dial the displayed

number.

•

1.

2.

3.

4.

1.

2.

3.

4.

To access a number from the

redial list while on a call:

Press REDIAL to enter the redial list.

Press , or REDIAL repeatedly to

browse to the desired entry.

Press SELECT to dial the displayed

number.

NOTE

Press CANCEL to exit the directory, caller ID

log or redial list while on a call.

Find handset

This feature helps you find misplaced

handsets.

To start paging:

Press FIND HANDSET on the

telephone base and its screen

displays

**

Paging

**

. All idle handsets

ring and display

**

Paging

**

.

To stop paging:

Press , , OFF or any of the

dialing keys on the cordless handset.

-OR-

Place the cordless handset to the

handset charger.

-OR-

Press FIND HANDSET on the

telephone base.

NOTES

Press MUTE to turn off the ringer of

that handset temporarily. Paging tone

continues on all other idle handsets.

Do not press and hold FIND HANDSET

for more than four seconds. It may lead

to handset deregistration. If the handset

displays To register HS and See manual,

refer to the Add and register a handset

section to register the handset back to the

telephone base.

1.

2.

3.

•

15

Multiple handset use

Intercom

Use the intercom feature for

conversations between the telephone

base and a cordless handset, or two

cordless handsets.

When you have two or more handsets,

use the handset number to initiate an

intercom call or to transfer a call.

Press 7 for the telephone base or 1-5

for HANDSET 1 to HANDSET 5.

To initiate an intercom call with a

cordless handset:

Press INT on the cordless handset

when it is not in use.

If you have only one handset, the

telephone base shows Calling

base. The telephone base rings

and shows HS 1 is calling.

If you have two or more handsets,

your handset shows Intercom

to. Use the dialing keys to enter

a device number. Your handset

shows Calling HS X/Calling base.

The destination device rings and

shows HS X is calling.

2. To answer the intercom call on the

destination handset, press , INT,

or any of the dialing keys. Both

handsets now show Intercom.

-OR-

To answer the intercom call at the

telephone base, press /SPEAKER,

INT, any of the dialing keys, or lift the

corded handset. Both devices now

show Intercom.

3. To end the intercom call on either

handset, one party presses OFF,

or places the handset back in the

handset charger. Both handsets

display Intercom ended.

•

1.

•

-OR-

To end the intercom call at the

telephone base, press INT or

/SPEAKER when using the base

speakerphone, or place the corded

handset back to the telephone base.

Both screens display Intercom

ended.

NOTES

You can cancel the intercom call before it

is answered by pressing CANCEL or INT.

If the destination handset is not powered,

out of range, on a call, or does not answer

the intercom call within 100 seconds, your

handset displays Unable to call and then

returns to idle mode.

If the telephone base is on a call, or does

not answer the intercom call within 100

seconds, your handset displays Unable to

call and then returns to idle mode.

You can press OFF or MUTE on the

cordless handset, or CANCEL or MUTE

on the telephone base to temporarily

silence the intercom ringer.

Two intercom calls can be established at

a time.

To initiate an intercom call at the

telephone base:

Press INT on the telephone base

when it is not in use.

If you have only one handset, the

telephone base shows Calling HS

1. The handset rings and shows

Base is calling.

If you have two or more handsets,

the telephone base shows

Intercom to. Use the dialing keys

to enter a handset number. The

telephone base shows Calling HS

X. The destination handset rings

and shows Base is calling.

2. To answer the intercom call on the

destination handset, press

, INT,

or any of the dialing keys. Both

devices now show Intercom.

•

1.

•

16

pressress

/SPEAKER, or lift up the

corded handset to answer the call.

To end the intercom call without

answering or canceling the incoming

call, press /SPEAKER, or place the

corded handset back to the base. The. The

telephone continues to ring.

Call transfer using intercom

Use the intercom feature to transfer an

outside call to another cordless handset

or the telephone base.

To transfer a call with a cordless

handset:

During a call, press INT.

If you have only one handset, the

outside call is put on hold and your

handset shows Calling base. The

telephone base rings and shows

HS 1 is calling.

If you have two or more handsets,

your handset shows Intercom to.

Use the dialing keys to eenter a

device number. The outside call

is put on hold and your handset

shows Calling HS X/Calling base.

The destination device rings and

shows HS X is calling.

2. To answer the call on the destination

handset, press, press

, INT,

, or any

of the dialing keys. The outside call

is still on hold and both handsets

display Intercom. You can now have

a private intercom conversation.

-OR-

To answer the call at the telephone

base, press INT

,

/SPEAKER, any

of the dialing keys or lift the corded

handset. The outside call is still

on hold and both devices display

Intercom. You can now have a

private intercom conversation.

•

1.

•

3. To end the intercom call at the

telephone base, press INT, or

/SPEAKER when using the base

speakerphone, or place the corded

handset back to the telephone base.

Both screens display Intercom

ended.

-OR-

To end the intercom call on the

destination handset, press OFF,

or place the handset back in the

handset charger. Both screens

display Intercom ended.

NOTES

If you do not have any cordless handset

registered to the telephone base, you will

hear two beeps when you press INT on

the base.

You can cancel the intercom call before it

is answered by pressing CANCEL or INT.

If the destination handset is not powered,

out of range, on a call, or does not answer

the intercom call within 100 seconds, your

telephone base displays Unable to call

and then returns to idle mode.

Answer an incoming call during

an intercom call

If you receive an incoming outside call

during an intercom call, you will hear an

alert tone.

To answer on a cordless handset:

To answer the call, press

. The

intercom call ends automatically.

To end the intercom call without

answering or canceling the incoming

call, press OFF. The telephone

continues to ring.

To answer at the telephone base:

Press

/SPEAKER, or place the

corded handset back to the base. The

intercom call ends automatically. Then

•

La page charge ...

VTech CS6648-2 Manuel utilisateur

Ce manuel convient également à

VTech CS6648-2 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents