BCM Advanced Research HID-2334-730-A1R Manuel utilisateur

DMR No: T54268-00 Part No: E2017H340A5R

Rev: 6th

Intelligent Display & System

HID-2334

23.8” Ultra-Light Medical Cart Panel PC with

Multi-touch Function

User Manual

6th Ed- 30 October 2020

HID-2334 User Manual

HID-2334 Quick Reference Guide

2

Instructions for the User

The document combines text and illustrations, providing a comprehensive overview of

the system. The information is presented as a sequential steps of actions, allowing

the user to learn directly how to use the device. The text provides explanations and

instructs the user step-by-step in the practical use of the product, with short, clear

instructions in an easy-to-follow sequence.

Minimum at least 18 years old and basically reading experience.

Read and understand “westernized Arabic numbers” when written in Arial font,

basically can distinguish human organs and understands hygiene.

Languages as specified in the marketing plan (Ext: Chinese, English….).

For general function operation, no special experience needed for user. For

maintenance project, no special experience needed. Basically mechanical tool

operation knowledge needed when install mounting means (One support system

capable of wall-mounting or base.), please contact a service technician or your

retailer.

Purposes and Applications

HID-2334 is intended to be used in healthcare institutions for general purpose as an

assisting device for data access – patient information, medical records, media

services, and so on. The product is designed for general or special use in the hospital

environment.

Operating principle

A Medical Panel PC has four main components: the arithmetic logic unit (ALU), the

control unit, the memory, and the input and output devices (collectively termed I/O).

These parts are interconnected by buses, often made of groups of wires.

The control unit, ALU, and registers are collectively known as a central processing

unit (CPU). Inside each of these parts are thousands to trillions of small electrical

circuits which can be turned off or on by means of an electronic switch. Each circuit

represents a bit (binary digit) of information so that when the circuit is on it represents

a "1", and when off it represents a "0" (in positive logic representation). The circuits

are arranged in logic gates so that one or more of the circuits may control the state of

one or more of the other circuits.

HID-2334 User Manual

HID-2334 Quick Reference Guide

3

Definitions

Warning! A WARNING statement provides important information about a

potentially hazardous situation which, if not avoided, could result in death

or serious injury.

Caution! A CAUTION statement provides important information about a

potentially hazardous situation which, if not avoided, may result in minor

or moderate injury to the user or patient or in damage to the equipment

or other property.

Attention! Un avertissement fournit des informations importantes sur une situation

potentiellement dangereuse qui, si elle n'est pas évitée, peut entraîner la

mort ou des blessures graves.

Précaution! Une mention ATTENTION fournit des informations importantes sur une

situation potentiellement dangereuse qui, si elle n'est pas évitée, peut

entraîner des blessures mineures ou modérées pour l'utilisateur ou le

patient ou des dommages à l'équipement ou à d'autres biens.

Note! A NOTE provides additional information intended to avoid inconveniences

during operation.

Safety Instructions

1. Strictly follow these Instructions for Use, please read these safety instructions

carefully.

2. Remind to keep this User's Manual for later reference, and any use of the product

requires full understanding and strict observation of all portions of these instructions.

Observe all WARNINGS and CAUTIONS as rendered throughout this manual and on

labels on the equipment.

3. Repair of the device may also only be carried out by MANUFACTURER.

Warning! Because of the danger of electric shock, never remove the cover of a

device while it is in operation or connected to a power outlet.

HID-2334 User Manual

HID-2334 Quick Reference Guide

4

Attention! En raison du risque de choc électrique, ne retirez jamais le couvercle

d'un appareil lorsqu'il est en fonctionnement ou connecté à une prise de

courant.

4. If one of the following situations arises, get the equipment checked by

MANUFACTURER:

The power cord or plug is damaged.

Liquid has penetrated into equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to the user's

manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

5. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.

Do not use liquid or spray detergents for cleaning and keep this equipment away from

humidity.

Caution! To avoid short-circuiting and otherwise damaging the device, do not allow

fluids to come in contact with the device. If fluids are accidentally spilled

on the equipment, remove the affected unit from service as soon as

possible and contact the service personnel to verify that patient safety is

not compromised.

Précaution! Pour éviter tout court-circuit et autrement endommager l'appareil, ne

laissez pas de liquides entrer en contact avec l'appareil. Si du liquide est

accidentellement renversé sur l'équipement, retirez l'unité affectée du

service dès que possible et contactez le personnel d'entretien pour

vérifier que la sécurité du patient n'est pas compromise.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it

fall may cause damage. For plug-in equipment, the power outlet socket must be

located near the equipment and must be easily accessible.

Caution! To prevent overheating, do not cover the openings and place the device in

direct sunlight or near radiant heaters.

HID-2334 User Manual

HID-2334 Quick Reference Guide

5

Précaution! Pour éviter la surchauffe, ne couvrez pas les ouvertures et placez

l'appareil à la lumière directe du soleil ou à proximité de radiateurs

rayonnants.

7. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet. Position the power cord so that people cannot step on

it. Do not place anything over the power cord. If the equipment is not used for a long

time, disconnect it from the power source to avoid damage by transient over voltage.

Caution! Do not leave this equipment in an uncontrolled environment where the

storage temperature is below -20° C (-4° F) or above 60° C (140° F). this

may damage the equipment.

Précaution! Ne laissez pas cet équipement dans un environnement non contrôlé où

la température de stockage est inférieure à -20 ° C (-4 ° F) ou

supérieure à 60 ° C (140 ° F). cela pourrait endommager l'équipement.

8. If your computer is losing dramatic time or the BIOS configuration reset to

default, the battery has no power.

Caution! Do not replace battery yourself. Please contact MANUFACTURER. The

computer is provided with a battery-powered real-time clock circuit. There

is a danger of explosion if battery is incorrectly replaced. Replace only

with same or equivalent type recommended by the manufacture. Discard

used batteries according to the manufacturer’s instructions.

Précaution! Ne remplacez pas la batterie vous-même. Veuillez contacter le

FABRICANT. L'ordinateur est équipé d'un circuit d'horloge en temps réel

alimenté par batterie. Il existe un risque d'explosion si la batterie n'est pas

remplacée correctement. Remplacez uniquement par un type identique

ou équivalent recommandé par le fabricant. Jeter les piles usagées conformément

aux instructions du fabricant.

9. Improper installation of VESA mounting can result in serious personal injury! VESA

mount installation should be operated by professional technician, please contact the

service technician or your retail if you need this service.

HID-2334 User Manual

HID-2334 Quick Reference Guide

6

10. Environmental protection: follow national requirements to dispose of unit.

11. Maintenance: to properly maintain and clean the surfaces, use only the approved

products or clean with a dry applicator.

12. Make sure the user not to contact SIP/SOPs and the patient at the same time.

13. When networking with electrical devices, the operator is responsible for ensuring

that the resulting system meets the requirements set forth by the following standards:

– EN 60601-1 (IEC 60601-1)

Medical electrical equipment

Part 1: General requirements for safety

– EN 60601-1-1 (IEC 60601-1-1)

Medical electrical equipment

Part 1-1: General requirements for safety

Collateral standard: Safety requirements for Medical electrical systems

– EN 60601-1-2 (IEC 60601-1-2)

Medical electrical equipment

Part 1-2: General requirements for safety

Collateral standard: Electromagnetic compatibility; Requirements and tests

14. Accessory equipment connected to the analog and digital interfaces must be in

compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950

for data processing equipment, IEC 60065 for video equipment, IEC 61010-1 for

laboratory equipment, and IEC 60601-1 for medical equipment.) Furthermore, all

configurations shall comply with the system standard IEC 60601-1-1. Everybody who

connects additional equipment to the signal input part or signal output part configures

a medical system, and is therefore, responsible that the system complies with the

requirements of the system standard IEC 60601-1-1. The unit is for exclusive

interconnection with IEC 60601-1 certified equipment in the patient environment and

IEC 60601-1 certified equipment outside of the patient environment. If in doubt,

consult the technical services department or your local representative.

HID-2334 User Manual

HID-2334 Quick Reference Guide

7

Caution! Use suitable mounting apparatus to avoid risk of injury.

Précaution! Utilisez un appareil de montage approprié pour éviter tout risque de

blessure.

15. Use a power cord that matches the voltage of the power outlet, which has been

approved and complies with the safety standard of your country.

Note! Environmental protection Follow national requirements to dispose of unit.

Warning! Do not modify this equipment without authorization of the manufacturer.

Warning! To avoid risk of electric shock, this equipment must only be connected to a

supply main with protective earth.

Caution! This adapter EDAC EM11011M(18) is a forming part of the medical device.

Attention! Ne modifiez pas cet équipement sans l'autorisation du fabricant.

HID-2334 User Manual

HID-2334 Quick Reference Guide

8

Attention! Pour éviter tout risque de choc électrique, cet équipement ne doit être

connecté qu'à une alimentation avec terre de protection.

Précaution! Cet adaptateur EDAC EM11011M(18) fait partie intégrante du dispositif

médical.

16. The design of Internal Smart battery is considered for backup purpose while

system accidently loosing main power supply in any situation, it will supply max.6mins

of the operating time to keep let user backup the data and shut down the system

properly.

Caution! Do not attempt to disassemble the battery pack. There is danger of

excessive temperatures, fire or explosion if the battery is incorrectly replaced. Please

contact with MANUFACTURER to replace battery packs.

Caution! Do not use the power adapter that isn’t made for the equipment, supplying

the equipment with inappropriate voltage may cause harm to the battery (if any) or

even worse burn the equipment.

Précaution! Do not attempt to disassemble the battery pack. There is danger of

excessive temperatures, fire or explosion if the battery is incorrectly replaced. Please

contact with MANUFACTURER to replace battery packs.

Précaution! Do not use the power adapter that isn’t made for the equipment,

supplying the equipment with inappropriate voltage may cause harm to the battery (if

any) or even worse burn the equipment.

HID-2334 User Manual

HID-2334 Quick Reference Guide

9

Caution! Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of

Used Batteries According to the Instructions."

Attention! Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez

les piles usagées selon les instructions

HID-2334 User Manual

HID-2334 Quick Reference Guide

10

Explanation of Graphical Symbols

Warning: dangerous voltage

Caution

Note

ISO 7000-1641: Follow operating instructions or Consult

instructions for use.

Direct current.

Equipotential

Stand-by

US Conformance

Follow the national requirements for disposal of equipment.

HID-2334 User Manual

HID-2334 Quick Reference Guide

11

Disposing of your old product

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste

electrical and electronic products carrying the mark (left) must be disposed of

separately from normal household waste. This includes monitors and

electrical accessories, such as signal cables or power cords. When

you need to dispose of your display products, please follow the

guidance of your local authority, or ask the shop where you

purchased the product, or if applicable, follow any agreements made

between yourself. The mark on electrical and electronic products only applies to the

current European Union Member States.

Federal Communication Commission Interference Statement

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT

TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL

INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

HID-2334 User Manual

HID-2334 Quick Reference Guide

12

 Connect the equipment into an outlet on a circuit different from the one the receiver is

connected to.

 Consult the dealer or an experienced radio/TV technician for help.

Notice:

(1) A Unshielded-type power cord is required in order to meet FCC emission limits and

also to prevent interference to the nearby radio and television reception. It is

essential that only the supplied power cord by used.

(2) Use only shielded cables to connect I/O devices to this equipment.

(3) Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

For product available in the USA/Canada market, only channel 1~11 can

be operated. Selection of other channels is not possible. The antenna(s)

used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter. Shielded interface

cables must be used in order to comply with emission limits.

HID-2334 User Manual

HID-2334 Quick Reference Guide

13

Additional Information and Assistance

Contact your distributor, sales representative for technical support if you need

additional assistance. Please have the following information ready before you call:

Product name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software,

etc.)

A complete description of the problem

The exact wording of any error messages

This equipment is a source of electromagnetic waves. Before use please, make

sure that there are not EMI sensitive devices in its surrounding which may

malfunction therefore.

Environmental protection

Follow national requirements to dispose of unit.

HID-2334 User Manual    
HID-2334 Quick Reference Guide   

CONTENT 
HID-2334 Multi Touch Medical Panel PC Features ................................ 16 
1 Packing List ...................................................................................... 16 
2 Specifications .................................................................................... 17 
3 Front view ......................................................................................... 20 
4 Rear & Bottom view .......................................................................... 21 
6 System Dimensions .......................................................................... 23 
Setting Up HID-2334 Multi Touch Panel PCs ......................................... 24 
1 VESA Mounting ................................................................................ 25 
2 Cabling.............................................................................................. 27 
3 Battery Installation (Optional) ............................................................ 29 
4 Barcode Scanner Kit Installation ....................................................... 30 
5 Cleaning and Disinfecting ................................................................. 30 
Using HID-2334 Multi Touch Panel PCs ................................................. 32 
1. Turn ON/OFF the System ................................................................ 33 
1.1 Turn ON the System ............................................................... 33 
1.2 Turn OFF the System ............................................................. 33 
2 Using LCD Display and Touch Screen ............................................. 34 
2.1 Adjust System Volume ............................................................ 34 
2.2 Adjust LCD Display Brightness ............................................... 34 
2.3 LED reading light & Touch function ......................................... 34 
Hardware Configuration .......................................................................... 35 
1 HID-2334 Overviews ......................................................................... 35 
2 HID-2334 DB-A Overviews ............................................................... 36 
3 HID-2334 Jumper and Connector list ................................................ 37 
4 HID-2334 Jumpers & Connectors settings ........................................ 39 
4.1 Clear CMOS (JCOMS1) ......................................................... 39 
4.2 LCD backlight brightness adjustment (JSBKL1) ..................... 39 
4.3 AT/ATX auto power on select (JAT1) ...................................... 40 
4.4 Front Audio connector (FAUD1) .............................................. 40 
4.5 On-board header for USB2.0 (JUSB3) ................................... 41 
4.6 On-board header for USB2.0 (JUSB4) ................................... 41 
4.7 Battery connector (BT1) .......................................................... 42 
4.8 Display Port connector (EDP1) ............................................... 42 
4.9 Speaker connector (SPK1) ..................................................... 43 
4.10 Power connector (PWR1) ..................................................... 43 
4.11 SPI connector (JSPI1) .......................................................... 44 

HID-2334 User Manual    
HID-2334 Quick Reference Guide   

4.12 EC Debug connector (JEC_SPI)........................................... 44 
4.13 LCD Inverter connector (JBKL1) ........................................... 45 
4.14 Reading Light connector (JLED_LIGHT) .............................. 45 
4.15 SATA Power connector (SPWR1) ......................................... 46 
4.16 I2C connector (I2C1) ............................................................ 46 
4.17 General purpose I/O connector (DIO1) ................................. 47 
4.18 Fan connector (FAN1) .......................................................... 47 
4.19 Front Panel connector 1 (JFPT1).......................................... 48 
4.20 Front Panel connector 2 (JFPT2).......................................... 48 
4.21 Serial port 1 connector (COM1) ............................................ 49 
4.22 Serial port 2 connector (COM2) ............................................ 49 
4.23 LPC connector (JLPC) .......................................................... 50 
4.24 Touch Panel connector (JTOUCH) ....................................... 50 
4.25 LVDS connector (LVDS1) ..................................................... 51 
4.26 Battery mode connector (JBAT_AUX1) ................................ 52 
5 HID-2334 DB-A Connector list .......................................................... 52 
6 HID-2334 DB-A Connectors settings ................................................ 53 
6.1 Battery connector 1 (JBAT1) ................................................... 53 
6.2 Battery connector 2 (JBAT2) ................................................... 53 
6.3 DC-in connector (JVIN1) ......................................................... 54 
6.4 DC-out connector (JVOUT1) .................................................. 54 
6.5 Battery mode connector (JAUX1) ........................................... 55 
General Safety Guide ............................................................................... 56 
Touch Button Guide ................................................................................ 59 
 
 
 

HID-2334 User Manual

HID-2334 Quick Reference Guide

16

1. HID-2334 Multi Touch Medical Panel PC

Features

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

In this chapter, you will get to know all features of our HID-2334

Multi Touch Medical Panel PC.

1.1 Packing List

 1 x HID-2334 Medical Panel PC

 1 x 24V 120W Medical power adapter

 1 x Power cord

 Optional Items:

Rechargeable Lithium Ion Battery

4 Bay Battery Charging Station

19V 120W Adapter for Charging Station

Barcode Scanner Kit

Power cords:

● Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated

250 Vmin., provided with a hospital-grade type plug 5-15P configuration for 120V application,

or 6-15P for 240V application.

● Do not overload wall outlets and extension cords as this may result in fire or electric shock.

● Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not

likely to be walked upon or pinched by items placed upon or against them, paying particular

attention to cords at plugs and receptacles.

● The power supply cord should be replaced by the designated operator only at all time.

●Use a power cord that matches the voltage of the power outlet, which has been approved

and complies with the safety standard of your particular country.

HID-2334 User Manual

HID-2334 Quick Reference Guide

17

1.2 Specifications

Component

Mother Board

HID-2334 M/B + Battery Charger Board

Charger Board

HID-2334 Battery Charging Board

CPU

7th Generation Intel® Core Kaby Lake i5-7300U Processor

CPU Cooler (Type)

Heatsink

Memory

2 x 260pin SODIMM socket up to 32GB Per Slot DDR4 2400 SDRAM

Power Supply

DC in

Adapter

EDAC EM11011M(18) 120W/24V

System Fan

Fan-less

Speaker

2W x 2

Camera

5.0M CMOS with auto-focus

Wireless LAN

mPCIe WiFi 1T1R 802.11b/g/n/ac/ BT4.0 (ACC-MPCIE-WIFI-10R)

Optional

Antenna

2 x PCB Antenna 2.4/5.0GHz-IPEX D1.13mm 50cm

(E170R020000R)

Bluetooth

BT4.0 Optional

Expansion Card

Mini PCIe slot x 1

NFC

JunWei NFC Module CT-NFCe-10 w/Antenna (ACC-NFC-USB-03R)

Optional

Battery

2 x 14.4V / 6800mAh 4S2P Totex / RRC hot swappable Rechargeable

Lithium Ion battery

Battery Charger

4 slots battery charger

Storage

Solid State Drive

2.5” 64GB SSD (ACC-2S3S-64G-07R) Optional

Panel

LCD Panel

AUO M238HVN01.0

LG LM238WF1-SLK1

LED DRIVER BD

Yes

Touch Screen

23.8'' P-Cap

Touch Controller

EETI EXC84H5680

External I/O

USB Port

4 x USB3.0 (2 x Double deck)

LAN Port

2 x RJ45

HID-2334 User Manual

HID-2334 Quick Reference Guide

18

Service Window

For memory and storage upgrade

Indicator Light

HDD LED, Power LED

Expansion Slots

1 x M.2 2230

1 x mPCIe with SATA or PCIE x1 mSATA

Others

1 x DP

1 x HDMI

Line-Out & Mic-in

Mechanical

Power Type

DC in +19V ~ 24V

Power Connector Type

Lockable DC jack

Dimension

592 x 382 x 49.5mm

Weight

6.9 kg (without battery and adapter)

Color

White Plastic

Finishing

Anti-Microbial

Fanless

Yes

OS Support

Win10 64 bit/Linux (Kernel after 4.7)

Reliability

EMI Test

CE/ FCC class B

Safety

CE(IEC/EN 60601-1, ed3.1; EN 60601-1-2, 4.0th)

UL/cUL(ANSI/AAMI ES60601-1:2005+A1,CAN/CSA C22.2

NO.60601-1:14)

Dust and Rain Test

Front IP65

Vibration Test

Random Vibration Operation

Reference IEC60068-2-64 Testing procedures

Test Fh : Vibration boardband random Test

1 Test PSD : 0.00454G²/Hz , 1.5 Grms

2 Test frequency : 5~500 Hz

3 Test axis : X,Y and Z axis

4 Test time : 30 minutes each axis

5 System condition : operation mode

6 Test curve

Sine Vibration Test

Reference IEC60068-2-6 Testing procedures

Test Fc : Vibration sinusoidal

1 Test Acceleration : 2G

2 Test frequency : 5~500 Hz

3 Sweep：1 Oct/ per one minute. (logarithmic)

4 Test axis : X,Y and Z axis

HID-2334 User Manual

HID-2334 Quick Reference Guide

19

5 Test time :30 min. each axis

6 System condition : Non-Operating mode

7 Test curve

Package Vibration Test:

Reference IEC60068-2-64 Testing procedures

Test Fh : Vibration boardband random Test

1 Test PSD : 0.026G²/Hz , 2.16 Grms

2 Test frequency : 5~500 Hz

3 Test axis : X,Y and Z axis

4 Test time : 30 minutes each axis

5 Test curve

Mechanical Shock Test

With CF/SSD: 10Grms, IEC 60068-2-27, Half Sine, 11ms

Drop Test

Package drop test

Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed

Test Ea : Drop Test

1 Test phase : One corner, three edges, six faces

2 Test high :

3 Package weight :

4 Test drawing

Operating Temperature

0 ~ 40 degree

Operating Humidity

0 ~ 90% Relative Humidity, Non-condensing

Storage and

Transportation Condition

-20 60 degree, 10%~95%@35°C, non-condensing

Atmospheric Pressure

700~1060hPa

Expected Service Life

16363.27hrs

Note: Specifications are subject to change without notice.

HID-2334 User Manual

HID-2334 Quick Reference Guide

20

1.3 Front view

Brightness

Up/down Icon

Volume

Up/down Icon

Reading

Light Icon

Power Icon

Touchscreen

Icon

Battery

Status icon

Backlight Icon

Camera

La page charge ...

BCM Advanced Research HID-2334-730-A1R Manuel utilisateur

Ce manuel convient également à

BCM Advanced Research HID-2334-730-A1R Manuel utilisateur

dans d''autres langues

Autres documents