LG STUDIO LUPXC2386N Manuel utilisateur

OWNER’S MANUAL

REFRIGERATOR

Please read this owner's manual thoroughly before operating

and keep it handy for reference at all times.

LUPXS3186N

LUPXC2386N

www.lg.com

2

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

3 PRODUCT FEATURES

4 IMPORTANT SAFETY

INSTRUCTIONS

7 COMPONENTS

7 Refrigerator Exterior

8 Refrigerator Interior

9 INSTALLATION

9 Installation Overview

10 Specifications

11 Unpacking the Refrigerator

11 Choosing the Proper Location

11 - Flooring

12 - Ambient Temperature

12 - Measuring the Clearances

12 Removing/Assembling the Doors

17 Connecting the Water Line

17 - Before You Begin

18 - Water Pressure

18 - What You Will Need

19 - Water Line Installation Instructions

20 Turning On the Power

21 Leveling

21 Door Alignment

21 - Adjusting Door Height

22 HOW TO USE

22 Before Use

23 Wi-Fi Eclipse Display

23 - Wi-Fi Eclipse Display Features

25 - Using the Wi-Fi Eclipse Display

26 Smart Features

31 In-Door Ice Bin

31 - Detaching the In-Door Ice Bin

31 - Assembling the In-Door Ice Bin

32 Automatic Icemaker

34 Ice and Water Dispenser

35 Storing Food

35 - Food Preservation Location

36 - Food Storage Tips

36 - Storing Frozen Food

37 Adjusting the Refrigerator Shelves

37 - Detaching the Shelf

37 - Assembling the Shelf

38 - When Closing the Door

38 CustomChill™ Pantry

38 - Setting the CustomChill™ Pantry

39 Crisper Drawers

39 - Removing the Crisper Drawers

39 - Assembling the Crisper Drawers

40 - Removing the Crisper Support Box

40 - Assembling the Crisper Support Box

41 Removing the CustomChill™ Pantry Insert

41 Hidden Bar Tray

41 InstaView™Door-in-Door®

42 EasyLift Bin

42 Freezer Drawer

42 - Removing the Freezer Drawer

43 - Assembling the Freezer Drawer

43 - Removing the Drawer Support

44 - Assembling the Drawer Support

44 Refrigerator/Freezer Door Bins

46 MAINTENANCE

46 Cleaning

47 Replacing the Fresh Air Filter

48 Replacing the Water Filter

52 SMART DIAGNOSIS

52 Using Smart Diagnosis™

53 TROUBLESHOOTING

64 WARRANTY

3

PRODUCT FEATURES

ENGLISH

PRODUCT FEATURES

Depending on the model, some of the following functions may not be available.

DOOR ALARM

The Door Alarm function is designed to prevent refrigerator malfunctioning

that could occur if a refrigerator door or freezer door remains open. If a

refrigerator door or freezer door is left open for more than 60 seconds, a

warning alarm sounds at 30 second intervals until it is closed.

ICE PLUS

Ice production can be increased by approximately 20 percent when the

freezer section is maintained at the coldest temperature for a 24-hour

period.

AUTO CLOSING HINGE

The refrigerator doors close automatically with a slight push. (The door only

closes automatically when it is open at an angle less than 30°.)

MEASURED FILL DISPENSER

Select from the Measured Fill menu on the dispenser to quickly dispense

pre-measured amounts automatically.

InstaView™Door-in-Door®

Two quick knocks on the sleek, mirrored glass panel allow you to see inside

the easy access compartment without opening the door. This reduces cold

air loss, and helps keep food fresh longer.

AUTO OPEN DOOR

This smart sensor is located at the foot of the refrigerator and opens the

door automatically. When you stand in front of the refrigerator, lighted "Door

Open" text is projected onto the floor. Step on the text and the door gently

opens.

FOLD-DOWN BIN RAILS

Use the metal bars on the Door-in-Door bins as either bin dividers or as rails

to keep tall items secure.

4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

This guide contains many important safety messages. Always

read and obey

all safety messages.

WARNING

You can be killed or seriously injured if you do not follow instructions.

CAUTION

Indicates an imminently hazardous situation which, if not avoided, may result

in minor or moderate injury, or product damage.

WARNING

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety

precautions should be followed, including the following:

Power

NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it

y

straight out from the outlet.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

y

similarly qualified person in order to avoid a hazard. Do not use a cord that shows cracks or abrasion

damage along its length or at either the plug or connector end.

Do not use an uncertified power outlet.

y

Unplug the power plug immediately in the event of a blackout or thunderstorm.

y

Plug in the power plug with the power cord facing downward.

y

Installation

Contact an authorized service center before you install or relocate the refrigerator.

y

When moving your refrigerator away from the wall, be careful not to roll over or damage the power

y

cord.

Prior to use, ensure that you are connecting this product to a dedicated, grounded electrical outlet

y

rated for use with this product (115V, 60Hz, AC only). It is the user’s responsibility to replace a

standard 2-prong wall outlet with a standard 3-prong wall outlet.

Do not install the refrigerator where there may be a danger of the unit falling.

y

Use

DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the

y

refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not hang on to or place heavy objects on the refrigerator’s dispenser.

y

Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.

y

Do not put live animals inside the refrigerator.

y

Do not allow children to climb into the product when it is in use.

y

In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an authorized service

y

center before resuming use. Do not touch or disassemble the electric outlet of the refrigerator.

In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure adequate

y

ventilation and contact an authorized service center.

Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the refrigerator

y

or store them inside the refrigerator. Do not place the refrigerator in the vicinity of flammable gas.

Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or

y

personal injury if items are removed with excessive force.

This is the safety alert symbol. It alerts you to safety messages that inform you of

hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard

signal word WARNING or CAUTION. These words mean:

5

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Do not hit the glass door panel with excessive force. Do not allow hard objects like cookware or

y

glass bottles to hit the glass door panel. The glass could break, resulting in a risk of personal injury or

product damage.

This product is not to be used for special purposes such as the storage of medicine or test materials

y

or for use on ships, etc.

Unplug the power plug before cleaning or repairing the refrigerator.

y

When you replace the light bulb in the refrigerator, unplug the refrigerator or turn off the power.

y

Do not modify or extend the power cord.

y

Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.

y

For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit

y

checked by a qualified electrician to make sure the outlet is properly grounded.

Do not use an outlet that can be turned off with a switch. Do not use an extension cord. It is the

y

user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

y

Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.

y

Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke

y

coming from the appliance.

Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.

y

Do not disassemble or modify the refrigerator.

y

Do not put hands, feet, or metal objects below or behind the refrigerator.

y

Do not operate the refrigerator or touch the power cord with wet hands.

y

In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector

y

mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the

automatic ice-making mechanism while the refrigerator is plugged in.

When dispensing ice from the dispenser, do not use crystal ceramics.

y

Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your

y

refrigerator is in operation.

Do not put glass containers, glass bottles or soda in the freezer.

y

This appliance is not intended for use by persons (including children) with reduced physical, sensory

y

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning the use of the appliance by a person responsible for their safety.

Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health

y

issue.

If you are throwing away your old refrigerator, make sure the CFC coolant is removed for proper

y

disposal by a qualified servicer. If you release CFC coolant, you may be fined or imprisoned in

accordance with the relevant environmental law.

Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When

y

disposing of the refrigerator, remove the packing materials from the door or take off the doors but

leave the shelves in place so that children may not easily climb inside.

If connected to a circuit protected by fuses, use time delay fuse.

y

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

WARNING

This product contains chemicals known to the State of California to cause cancer and birth defects

or other reproductive harm.

Wash hands after handling.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety

precautions should be followed, including the following:

6

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

CAUTION

Installation

The refrigerator must be properly installed in accordance with the Installer Instructions that were

y

taped to the front of the refrigerator.

Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and other

y

packing materials out of reach of children.

The appliance must be positioned for easy access to a power source.

y

Use

Close the door carefully when children are around.

y

Keep fingers out of pinch point areas; clearances between the doors and cabinets are

y

necessarily small. Be careful closing doors when children are nearby.

If you store food improperly, be aware that it may fall and cause injury.

y

Do not use aerosols near the refrigerator.

y

Do not store articles on the top of the appliance.

y

Maintenance

Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.

y

Wipe foreign objects (such as dust and water) off the prongs of the power plug and contact

y

areas regularly.

Do not store, disassemble or repair the refrigerator by yourself.

y

Remove any dust or foreign matter from the power plug pins.

y

Do not use a wet or damp cloth when cleaning the plug.

y

If the refrigerator is disconnected from the power supply, you should wait for at least five

y

minutes before plugging it back in.

If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator

y

immediately and contact your LG Electronics Service Center.

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety

precautions should be followed, including the following:

SAVE THESE INSTRUCTIONS

7

COMPONENTS

ENGLISH

COMPONENTS

Use this page to become more familiar with the parts and features of your refrigerator.

*The appearance and specifications of the actual product may differ depending on the model.

Refrigerator Exterior

Refrigerator

Preserves food.

Freezer

Preserves frozen food.

Dispenser Control Panel

Displays the icemaker and

dispenser modes and the water

filter status.

Filtered Water and

Ice Dispenser

Dispenses purified water and ice.

InstaView™

Door-in-Door®

Wi-Fi Eclipse

Display

Intuitively displays

status and enables

control of fridge/

freezer temperatures,

energy consumption

monitoring, smart

saving, and smart grid

features.

8

COMPONENTS

ENGLISH

Refrigerator Interior

LED Interior Lamp

The interior lamps light up

the inside of the refrigerator.

Adjustable Refrigerator Shelf

The shelves in your refrigerator are adjustable

to meet your individual storage needs.

Refrigerator

Bin

Crisper

Freezer Bin

Hidden Bar Tray

CustomChill™

Pantry

Freezer

Drawer

Freezer

Drawer

Indoor Ice Bin

Ice cubes are

automatically

produced.

InstaView™

Door-in-Door®

See what's inside the

Door-in-Door compartment

without opening the door.

Keeps the cold air inside

and saves energy.

Condiment Bin

Crisper

Freezer Bin

9

INSTALLATION

ENGLISH

INSTALLATION

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting

it to another location.

NOTE

Connect to potable water supply only.

1 Unpacking your

refrigerator

4 Connecting the

water supply and

water line

2 Choosing the proper

location

5 Leveling and Door

Alignment

3 Disassembling/Assembling

10

INSTALLATION

ENGLISH

Specifications

The appearance and specifications listed in this manual may vary due to constant product

improvements.

Bottom-freezer refrigerator model LUPXS3186N

Description French-door refrigerator

Electrical requirements 115 VAC @ 60 Hz

Min./Max. Water pressure

20 - 120psi (138 - 827kPa)

Dimensions

35 7/8”(W) x 36 1/2”(D) x 70 1/4”(H) x 51 1/8”(D w/ door open)

912(W) X 929(D) X 1784(H) X 1298 mm (D w/ door open)

Net weight 483 lb. (219 kg)

Bottom-freezer refrigerator model LUPXC2386N

Description French-door refrigerator

Electrical requirements 115 VAC @ 60 Hz

Min./Max. Water pressure

20 - 120psi (138 - 827kPa)

Dimensions

35 7/8”(W) x 29 5/8”(D) x 70 1/4”(H) x 44 3/16”(D w/ door open)

912(W) X 754(D) X 1784(H) X 1123 mm (D w/ door open)

Net weight 430 lb. (195 kg)

11

INSTALLATION

ENGLISH

Choosing the Proper Location

Select a place where a water supply can

y

be easily connected for the automatic

icemaker.

Unpacking the Refrigerator

WARNING

Use two or more people to move and

y

install the refrigerator. Failure to do so

can result in back or other injury.

Your refrigerator is heavy. When moving

y

the refrigerator for cleaning or service,

be sure to protect the floor. Always pull

the refrigerator straight out when moving

it. Do not wiggle or walk the refrigerator

when trying to move it, as floor damage

could occur.

Keep flammable materials and vapors,

y

such as gasoline, away from the

refrigerator. Failure to do so can result in

fire, explosion, or death.

Remove tape and any temporary labels from your

refrigerator before using. Do not remove any

warning-type labels, the model and serial number

label, or the Tech Sheet that is located under the

front of the refrigerator.

But, when you remove tape and temporary label,

remove them after pulling out the power plug.

To remove any remaining tape or glue, rub the

area briskly with your thumb. Tape or glue residue

can also be easily removed by rubbing a small

amount of liquid dish soap over the adhesive with

your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol,

flammable fluids, or abrasive cleaners to remove

tape or glue. These products can damage the

surface of your refrigerator.

Refrigerator shelves are installed in the shipping

position. Please reinstall shelves according to

your individual storage needs.

The refrigerator should always be plugged

y

into its own individual properly grounded

electrical outlet rated for 115 Volts, 60 Hz,

AC only, and fused at 15 or 20 amperes.

This provides the best performance

and also prevents overloading house

wiring circuits which could cause a fire

hazard from overheated wires. It is

recommended that a separate circuit

serving only this appliance be provided.

WARNING

To reduce the risk of electric shock, do not

install the refrigerator in a wet or damp

area.

NOTE

The water pressure must be 20~120

psi or 138~827 kPa or 1.4~8.4 kgf/cm²

on models without a water filter and

40~120 psi or 276~827 kPa or 2.8~8.4

kgf/cm² on models with a water filter.

Flooring

To avoid noise and vibration, the unit must be

leveled and installed on a solidly constructed

floor. If required, adjust the leveling legs to

compensate for unevenness of the floor. The

front should be slightly higher than the rear to

aid in door closing. Leveling legs can be turned

easily by tipping the cabinet slightly. Turn the

leveling legs to the left to raise the unit or to

the right to lower it. (See Leveling and Door

AlIgnment.)

NOTE

Installing on carpeting, soft tile surfaces,

a platform or weakly supported structure

is not recommended.

12

INSTALLATION

ENGLISH

Ambient Temperature

Install this appliance in an area where the

temperature is between 55°F (13°C) and 110°F

(43°C). If the temperature around the appliance

is too low or high, cooling ability may be

adversely affected.

Measuring the Clearances

Too small of a distance from adjacent items

may result in lowered freezing capability and

increased electricity consumption charges.

Allow at least 24 inches (61 cm) in front of the

refrigerator to open the doors, and at least

2 inches (5.08 cm) between the back of the

refrigerator and the wall.

Removing/Assembling the Doors

2” (5.08 cm)

24” (61 cm)

Removing the Left Refrigerator Door

1

The water supply is connected to the

upper right part of the rear surface of the

refrigerator. Remove the ring in the joint

area. Hold the water supply connection

and gently push the collet to detach the

water supply line as shown in

.

Collet

2

Remove the screws from the hinge cover

at the top of the refrigerator. Lift the

hook(not visible), located on the side of the

cover at the bottom edge, with a flat-head

screwdriver.

NOTE

Detachment of the water supply line is

applicable only when detaching the left

refrigerator door.

13

INSTALLATION

ENGLISH

3

Remove the cover and pull out the tube .

Disconnect all wire harnesses

.

4

Rotate the hinge lever counterclockwise

. Lift the top hinge free of the hinge

lever latch.

CAUTION

When lifting the hinge free of the latch, be

careful that the door does not fall forward.

1

2

1

2

Hinge Lever Latch

5

Lift the door from the middle hinge pin and

remove the door.

CAUTION

Place the door, inside facing up, on a

non-scratching surface.

Removing the Right Refrigerator

Door

1

Remove the screws from the hinge cover

at the top of the refrigerator. Lift the

hook(not visible), located on the side of the

cover at the bottom edge, with a flat-head

screwdriver.

2

Detach the wire harness .

1

CAUTION

When lifting the hinge free of the hinge

lever latch, be careful that the door

does not fall forward.

3

Rotate the hinge lever clockwise.

Lift the top hinge

free of the hinge

lever latch.

1

2

Hinge Lever Latch

14

INSTALLATION

ENGLISH

4

Lift the door from the middle hinge pin and

remove the door.

CAUTION

Place the door, inside facing up, on a

non-scratching surface.

3

Unscrew the screw that attaches the

lower hinge cover and remove the cover.

Removing the Freezer Doors

1

Remove the two hinge bolts.

2

Twist the hinge to raise the pivoting end

so that the door can be lifted off. Lift the

door off the lower hinge pin and remove it.

4

Disconnect all wire harnesses.

5

Remove the door by lifting it off the lower

hinge pin.

Assembling the Freezer Doors

1

Lower the door onto the lower hinge pin.

2

Connect the wire harnesses.

1

2

Lower hinge

15

INSTALLATION

ENGLISH

Install the right refrigerator door first.

1

Make sure that the plastic sleeve is

inserted in the bottom of the door. Lower

the door onto the middle hinge pin as

shown in the figure.

2

Fit the hinge over the hinge lever latch

and slot it into place. Rotate the lever

counterclockwise to secure the hinge.

3

Connect the wire harness .

4

Position the cover in its place. Insert and

tighten the cover screws.

3

Position the bottom hinge cover in its place

and tighten the cover screw .

4

Position the middle hinge pin in place to

hold the door and insert the two hinge

bolts.

5

Tighten the two hinge bolts.

Assembling the Right Refrigerator Door

2

1

Hinge Lever Latch

2

1

16

INSTALLATION

ENGLISH

Install the left refrigerator door after the right

door is installed.

1

Make sure that the plastic sleeve is

inserted in the bottom of the door. Install

the refrigerator door onto the middle hinge

pin.

2

Fit the hinge over the hinge lever latch

and slot it into place. Rotate the lever

clockwise

and fasten the hinge.

Assembling the Left Refrigerator

Door

3

Connect all the wire harnesses.

2

1

Hinge Lever Latch

4

Push the water supply tube into the hole

on the top case and pull it through the

backplate.

5

Hold the water supply connection and

gently push in the collet to connect the

water supply line as shown in

. Insert

the tube at least

5

/

8

inch (15 mm) into the

connector.

6

Position the cover in its place. Insert and

tighten the cover screws.

Collet

17

INSTALLATION

ENGLISH

Connecting the Water Line

Before You Begin

This water line installation is not covered by the

refrigerator warranty. Follow these instructions

carefully to minimize the risk of expensive water

damage.

Water hammer (water banging in the pipes) in

house plumbing can cause damage to refrigerator

parts and can lead to water leakage or flooding.

Call a qualified plumber to correct water hammer

before installing the water supply line to the

refrigerator.

If you use your refrigerator before connecting

the water line, make sure the icemaker power

switch on the control panel is in the OFF

position.

CAUTION

Do not install the icemaker tubing in

areas where temperatures fall below

freezing.

CAUTION

To prevent burns and product damage,

only connect the refrigerator water line to

a cold water supply.

Collet

Tube

Insert Line

NOTE

1) Gently insert the tube until only one

line shows on the tube.

2) Pull the tube to make sure that the

tube is tightly fastened.

(Correct)

(Incorrect)

18

INSTALLATION

ENGLISH

CAUTION

Wear eye protection during installation

to prevent injury.

Water Pressure

The water pressure must be 20~120 psi or

138~827 kPa or 1.4~8.4 kgf/cm² on models

without a water filter and 40~120 psi or 276~827

kPa or 2.8~8.4 kgf/cm² on models with a water

filter.

If a reverse osmosis water filtration system is

connected to the cold water supply, this water

line installation is not covered by the refrigerator

warranty. Follow the instructions carefully to

minimize the risk of expensive water damage.

If a reverse osmosis water filtration system is

connected to the cold water supply, the water

pressure to the reverse osmosis system needs

to be a minimum of 40 to 60 psi (276~414 kPa or

2.8~4.2 kgf/cm², less than 2.0~3.0 sec. to fill a

cup of 7 oz or 198 cc capacity).

If the water pressure from the reverse osmosis

system is less than 20 psi or 138 kPa or 1.4 kgf/

cm² (takes more than 4.0 sec to fill a cup of 7 oz

or 198 cc capacity):

Check to see if the sediment filter in

y

the reverse osmosis system is blocked.

Replace the filter if necessary.

Allow the storage tank on the reverse

y

osmosis system to refill after heavy

usage.

If the issue concerning water pressure

y

from reverse osmosis remains, call a

licensed, qualified plumber.

All installations must be in accordance

y

with local plumbing code requirements.

What You Will Need

Copper Tubing,

y

¼ in. outer diameter, to

connect the refrigerator to the water

supply. Be sure both ends of the tubing

are cut square.

To determine how

y

much tubing you need:

measure the distance

from the water valve on the back of

the refrigerator to the water supply

pipe. Then, add 8 feet (2.4 m). Be sure

there is sufficient extra tubing (about 8

feet [2.4 m] coiled into 3 turns of about

10 in. [25 cm] diameter) to allow the

refrigerator to move out from the wall

after installation.

Power drill.

y

½ in. or adjustable

y

wrench.

Flat blade and Phillips

y

head screwdrivers.

Two ¼ in. outer

y

diameter compression

nuts and 2 ferrules (sleeves)

to connect the

copper tubing to the shutoff valve and

the refrigerator water valve.

If your existing copper water line has a

y

flared fitting at the end, you will need

an adapter (available at plumbing supply

stores) to connect the water line to the

refrigerator OR you

can cut off the flared

fitting with a tube

cutter and then use a

compression fitting.

Shutoff valve

y

to connect to the cold

water line. The shutoff valve should

have a water inlet with a minimum

inside diameter of 5/32 in. at the point of

connection to the COLD WATER LINE.

Saddle-type shutoff valves are included

in many water

supply kits. Before

purchasing, make

sure a saddle-type

valve complies with

your local plumbing codes.

NOTE

A self piercing saddle type water valve

should not be used.

19

INSTALLATION

ENGLISH

Water Line Installation Instructions

Install the shutoff valve on the nearest

frequently used drinking water line.

1

SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet to relieve the

pressure on the line.

2

CHOOSE THE VALVE LOCATION

Choose a location for

the valve that is easily

accessible. It is best to

connect into the side of a

vertical water pipe. When

it is necessary to connect

into a horizontal water

pipe, make the connection to the top or

side, rather than at the bottom, to avoid

drawing off any sediment from the water

pipe.

3

DRILL THE HOLE FOR THE VALVE

Drill a ¼ in. hole in

the water pipe using

a sharp bit. Remove

any burrs resulting

from drilling the hole

in the pipe. Be careful

not to allow water

to drain into the drill. Failure to drill a ¼ in.

hole may result in reduced ice production

or smaller cubes.

WARNING

When using any electrical device

(such as a power drill) during

installation, be sure the device is

battery powered, double insulated

or grounded in a manner that will

prevent the hazard of electric shock.

4

FASTEN THE SHUTOFF VALVE

Fasten the shutoff valve to the cold water

pipe with the pipe clamp.

Pipe Clamp

Saddle-Type

Shutoff Valve

Vertical Cold

Water Pipe

5

TIGHTEN THE PIPE CLAMP

Tighten the clamp screws until the sealing

washer begins to swell.

NOTE:

Do not overtighten the clamp or

you may crush the tubing.

6

ROUTE THE TUBING

Route the tubing between the cold water

line and the refrigerator.

Route the tubing through a hole drilled in

the wall or floor (behind the refrigerator or

adjacent base cabinet) as close to the wall

as possible.

Pipe Clamp

Clamp Screw

Washer

Inlet End

NOTE

The hookup line cannot be white, plastic

tubing. Licensed plumbers must use

only copper tubing (NDA tubing #49595

or #49599) or Cross Link Polyethylene

(PEX) tubing.

NOTE

Be sure there is sufficient extra tubing

(about 8 feet coiled into 3 turns of

about 10 in. diameter) to allow the

refrigerator to move out from the wall

after installation.

NOTE

Commonwealth of Massachusetts

Plumbing Codes 248CMR shall be adhered

to. Saddle valves are illegal and their use is

not permitted in Massachusetts. Consult

with your licensed plumber.

20

INSTALLATION

ENGLISH

7

CONNECT THE TUBING TO THE VALVE

Place the compression nut and ferrule

(sleeve) for the copper tubing onto the

end of the tubing and connect it to the

shutoff valve. Make sure the tubing is

fully inserted into the valve. Tighten the

compression nut securely.

8

FLUSH OUT THE TUBING

Turn the main water

supply on and flush out

the tubing until the water

is clear.

Shut the water off at the

water valve after about

one quart of water has

been flushed through the tubing.

9

CONNECT THE TUBING TO THE

REFRIGERATOR

NOTE:

Before making the connection

to the refrigerator, be sure that the

refrigerator power cord is not plugged into

the wall outlet.

a. Remove the plastic flexible cap from the

water valve.

b. Place the compression nut and ferrule

(sleeve) onto the end of the tubing as

shown.

c. Insert the end of the copper tubing into

the connection as far as possible. While

holding the tubing, tighten the fitting.

Tubing Clamp

¼ in. Tubing

¼ in.

Compression

Nut

Refrigerator

Connection

Ferrule

(sleeve)

Saddle-Type

Shutoff Valve

Packing Nut

Outlet Valve

Compression

Nut

Ferrule (sleeve)

10

TURN THE WATER ON AT THE SHUTOFF

VALVE

Tighten any connections that leak.

11

PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it

does not vibrate against the back of the

refrigerator or against the wall. Push the

refrigerator back to the wall.

12

START THE ICEMAKER

Turn the icemaker ON at the control panel.

The icemaker will not begin to operate

until it reaches its operating temperature

of 15°F (–9°C) or below. It will then begin

operation automatically if the icemaker has

been turned ON.

Turning On The Power

Plug in the refrigerator.

CAUTION

Check to see if leaks occur at the water

line connections.

CAUTION

Connect to a rated power outlet.

y

Have a certified electrician check

y

the wall outlet and wiring for proper

grounding.

Do not damage or cut off the ground

y

terminal of the power plug.

La page charge ...

LG STUDIO LUPXC2386N Manuel utilisateur

Ce manuel convient également à

LG STUDIO LUPXC2386N Manuel utilisateur

dans d''autres langues

Autres documents