Maruyama MS0741 Manuel utilisateur

MANUEL DU PROPRIETAIRE/DE L'UTILISATEUR

MANUAL DEL PROPIETARIO U OPERADOR

MS75

BACK PACK POWER SPRAYER

PULVÉRISATEUR À DOS

PULVERIZADOR MOTORIZADO DE MOCHILA

OWNER'S/OPERATOR'S MANUAL

Lisez et assimilez la totalité de ce manuel avant d'utiliser cet appareil.

Lea y entienda este manual a fondo, antes de usar este aparato.

1

English

Warnings

In this manual, important handling cautions are indicated as follows:

When lending the machine to another party or

having someone else operate it, provide training

on the operating method in advance, and explain

each at the warning labels with (Safety caution

mark).

In addition, provide the person with the operation

manual and safe operation manual, and advise

him to operate it only after reading these manuals

carefully and mastering the operating method.

Remind the person about prohibited matters.

The same applies to your family.

However, children should be prevented from using

this machine.

DANGER

WARNING

CAUTION

Death or serious injury is anticipated when not complying with the warning.

Possibly death or serious injury is anticipated when not complying with the warning.

Possibly injury is anticipated when not complying with the warning

Machine will possibly be damaged if not complying with the warning

Preface

Thank you for purchasing MARUYAMA products.

This operation manual explains the correct han-

dling method, simple checks and maintenance of

this product.

Please read this operation manual carefully,

understand its contents, and use it to maintain the

superior performance of this product.

Keep this manual after you read it and use it for

the life of operation of this product. Note that

discrepancies between the actual product and the

content of this manual may be found as we are

continually improvements to provide better quality

products to our customers.

Please send any inquiries about this product to

your nearest sales outlet our sales ofiice.

Please keep this operation manual carefully.

If you lose this operation manual, purchase a

replacement at your nearest sales outlet or our

sales office.

Remodeling this product prevents safe and

comfortable operation, and is very dangerous.

WHEN USING THE

MACHINE YOURSELF.

English

2

Limited Warranty Statement

All Maruyama commercial/ industrial products are warranted to the original purchaser to be free from

defects in material and workmanship from the date of purchase for the time periods listed as follows:

Lifetime for inner drive shaft on trimmers and brushcutters and all ignition modules.

5 years for Commercial and Residential use.

1 year for Rental use.

All Maruyama engines and Kawasaki TK45/TK65 are covered exclusively for five years of industrial,

commercial, institutional, and income producing use. These engines are warranted for one year of

rental use.

This warranty will be in full effect provided the engine is operated for the initial 80 hour optimization

period using Maruyama Premium 2-Cycle oil. After the optimization period the engine should always be

run with either Maruyama Premium 2-Cycle oil or equivalent ISO-L-EGD & JASO FC 2-Cycle oil.

Any part of a Maruyama product found to be defective within the applicable warranty period shall, at

Maruyama's option, be repaired or replaced without charge. Warranty consideration is obtained by

delivering any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer within

the applicable warranty period.

The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted part is

defective, if the diagnostic work is performed at a Maruyama Dealer.

Any warranted part which is not scheduled for replacement as required maintenance, or which is

scheduled only for regular inspection to the effect of "repair or replace as necessary" shall be warranted for the

warranty period. Any warranted part, which is scheduled for replacement as, required maintenance shall be

warranted for the period of time up to the first scheduled replacement point for that part. Maruyama Mfg. Co.,

Inc. is liable for damages to other engine components caused by the failure of a warranted part still under

warranty.

The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama Mfg.

Co., Inc. in the Owner's/Operator's Manual.

EMISSION-RELATED PARTS WARRANTY: In addition to the above warranty coverage, Maruyama Mfg.

Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent purchaser

any emission-related part or parts found to be defective in material and workmanship for two (2) years from

original retail delivery date except catalytic converter. Catalytic converter is warranted one year from

original retail delivery date. Emission-related parts are the carburetor assembly, the ignition coil

assembly, the ignition rotor, the spark plug, the catalytic converter and the fuel tank. Any

replacement part that is equivalent in performance and durability may be used in non-warranty

maintenance or repairs, and shall not reduce the warranty obligations of Maruyama Mfg. Co., Inc.

This warranty does not cover the following:

1. Maintenance items (excluding defects in materials and workmanship) including hoses, spark plugs, starter

rope, air and fuel filters, clutch shoes, vibration isolators, throttle cables and all cutting attachments,

etc.

2. Extra expenses including shipping and handling, travel, payment for lost time or pay and for any

inconvenience and storage.

3. Alterations or modifications including aftermarket parts not authorized by Maruyama U.S., Inc.

4. Wear, accident, abuse, neglect, misuse, negligence, improper fuels, lubricants, fuel mixtures (when

applicable), or failure to operate or maintain the product in accordance with instructions approved by

Maruyama, repair or replacement as provided under this warranty is the exclusive remedy of the consumer.

3

English

Maruyama shall not be liable for any incidental or consequential damages for breach of any express or

implied warranty on these products except to the extent prohibited by applicable law. Any implied

warranty of merchantability or fitness for a particular purpose on these products is limited in duration to the

warranty period as defined in the limited warranty statement. Maruyama reserves the rights to change or

improve the design of the product without notice and does not assume obligation to update previously

manufactured products.

This warranty provides you with specific legal rights, which may vary from state to state.

It is the Owner's and Dealer's responsibility to make sure the Warranty Registration Card is properly filled out

and mailed to Maruyama U.S., Inc. Proof of purchase and registration will be required in order to obtain

warranty service.

To locate an Authorized Maruyama Servicing Dealer nearest you, contact:

Maruyama U.S., Inc.

4770 Mercantile Drive, suite100,

Fort Worth, TX 76137 U.S.A.

940-383-7400

maruyama@maruyama-us.com

www.maruyama-us.com

4

English

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board (CARB), and Maruyama Manufacturing Company, Inc. are pleased to explain the

emission control system warranty on your 2015 small off-road engine. In California, new small off-road engines must be

designed, built and equipped to meet the State's stringent anti-smog standards. Maruyama Manufacturing Company, Inc.

must warrant the emission control system on your small off-road engine for the period of time listed above provided there

has been no abuse, neglect or improper maintenance of your small off-road engine.

Your emission control system may include parts such as the carburetor or fuel injection system, the ignition system, fuel

tank and catalytic converter. Also included may be hoses, belts, and connectors and other emission related assemblies.

Where a warrantable condition exists, Maruyama Manufacturing Company, Inc. will repair your small off-road engine at no

cost to you, including diagnosis, parts, and labor.

MANUFACTURER'S WARRANTY COVERAGE:

The 1995 and later small off-road engines are warranted for two years. If any emission-related part on your engine is

defective, the part will be repaired or replaced by Maruyama Manufacturing Company, Inc.

OWNER'S WARRANTY RESPONSIBILITIES:

(a) As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your

owner's manual.

Maruyama Manufacturing Company, Inc. recommends that you retain all receipts covering maintenance on your small

off-road engine, but Maruyama Manufacturing Company, Inc. cannot deny warranty solely for the lack of receipts or for

your failure to ensure the performance of all scheduled maintenance

(b) As the small off-road engine owner, you should be aware, however, that Maruyama Manufacturing Company may deny

you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance

or unapproved modifications.

(c) You are responsible for presenting your small off-road engine to a Maruyama Manufacturing Company, Inc. distribution

center as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to

exceed 30 days.

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

WARNING

:

.

5

English

If you have any questions regarding your warranty rights and responsibilities, you should contact Maruyama U.S., Inc. at

1-866-783-7400, or [email protected].

Emission System Parts

Exhaust Emission

Carburetor

Muffler

Catalytic Converter

Ignition Coil / Magneto

Spark Plug

Air Filter

EGR Valve (piston)

Fuel Filter

Evaporative Emission

Fuel Tank

6

English

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The U.S. Environmental Protection Agency (EPA) and Maruyama Manufacturing Company, Inc. are pleased to explain the

emission control system warranty on your small off-road engine. New 1997 and later model year small off-road engines

must be designed, built and equipped, at the time of sale, to meet the U.S. EPA regulations for small off-road engines. The

equipment engine must be free from defects in materials and workmanship which cause it to fail to conform with U.S. EPA

standards for the first two years of engine use from the date of sale to the ultimate purchaser. Maruyama Manufacturing

Company, Inc. must warrant the emission control system on your small off-road engine for the period of time listed above

provided there has been no abuse, neglect or improper maintenance of your small off-road engine.

Emission durability of 300 hours.

Your emission control system may include parts such as the carburetor or fuel injection system, the ignition system, and

catalytic converter. Also included may be hoses, belts, and connectors and other emission related assemblies.

Where a warrantable condition exists, Maruyama Manufacturing Company, Inc. will repair your small off-road engine at no

cost to you, including diagnosis (if the diagnostic work is performed at an authorized dealer), parts, and labor.

MANUFACTURER'S WARRANTY COVERAGE:

The 1997 and later model year small off-road engines are warranted for two years. If any emission-related part on your

engine is defective, the part will be repaired or replaced by Maruyama Manufacturing Company, Inc. free of charge.

OWNER'S WARRANTY RESPONSIBILITIES:

(a) As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your

owner's manual.

Maruyama Manufacturing Company, Inc. recommends that you retain all receipts covering maintenance on your small

off-road engine, but Maruyama Manufacturing Company, Inc. cannot deny warranty solely for the lack of receipts or for

your failure to ensure the performance of all scheduled maintenance. Any replacement part or service that is

equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce

the warranty obligations of the engine manufacturer.

(b) As the small off-road engine owner, you should be aware, however, that Maruyama Manufacturing Company may deny

you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance

or unapproved modifications.

(c) You are responsible for presenting your small off-road engine to a Maruyama Manufacturing Company, Inc. service

center as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to

exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact Maruyama U.S., Inc. at

4770 Mercantile Drive, suite100, Fort Worth, TX 76137 U.S.A. 940-383-7400

7

English

COVERAGE

Maruyama Manufacturing Company, Inc. warrants to the ultimate purchaser and each subsequent purchaser that your

small off-road engine will be designed, built and equipped, at the time of sale, to meet all applicable regulations.

Maruyama Manufacturing Company, Inc. also warrants to the initial purchaser and each subsequent purchaser that your

small off-road engine is free from defects in materials and workmanship which cause the engine to fail to conform with

applicable regulations for a period of two years.

The 1997 and later model years, EPA requires manufacturers to small off-road engines for two years. These warranty

periods will begin on the date the small off-road engine is purchased by the initial purchaser. If any emission-related part

on your engine is defective, the part will be replaced by Maruyama Manufacturing Company, Inc. at no cost to the owner.

Maruyama Manufacturing Company, Inc. shall remedy warranty defects at any authorized Maruyama Manufacturing

Company, Inc. engine dealer or warranty station. Any authorized work done at an authorized dealer or warranty station

shall be free of charge to the owner if such work determines that a warranted part is defective. Any manufacturer-

approved or equivalent replacement part may be used for any warranty maintenance or repairs on emission-related parts,

and must be provided free of charge to the owner if the part is still under warranty, Maruyama Manufacturing Company,

Inc. is liable for damages to other engine components caused by the failure of a warranted part still under warranty.

EPA considers emission-related warranted parts to include all the parts listed below. These warranted parts are: the

carburetor assembly, the ignition coil assembly, the ignition rotor, the spark plug, the catalytic converter, and the fuel tank.

MAINTENANCE REQUIREMENTS

The owner is responsible for the performance of the required maintenance as defined by the Maruyama Manufacturing

Company, Inc. in the owner's manual.

LIMITATIONS

This Emission Control System Warranty shall not cover any of the following:

(a) repair or replacement required because of misuse or neglect, lack of required maintenance, repairs improperly

performed or replacements not conforming to Maruyama Manufacturing Company, Inc. specifications that adversely

affect performance and/or durability, and alterations or modifications not recommended or approved in writing by

Maruyama Manufacturing Company, Inc., and

(b) replacement of parts and other services and adjustments necessary for required maintenance at and after the first

scheduled replacement point.

8

English

Contents

Limited warranty statement 2

1. In order to work safely

9

Cautions prior to work 9

Cautions when you useing this product

10

Cautions after the use

12

2. Name of each part and function 13

Warning label 14

3. Handling and operating method 15

Assembly of nozzle 15

Oil feeding and mixing

16

Start

17

Operation and shutting down

19

Replacement nozzle

20

Throttle adjusting parameter

20

4. Cleaning, maintenance, and storage 21

Cleaning, maintenance and draining 21

Storage

22

Trouble-shooting and actions

23

5. Specification 24

English

9

Check and maintain protective equipment to maintain their normal functions at all times, and use them correctly.

Spray operator who wears

appropriate clothes.

Hat

Ear plugs noisy work

Protective

clothes

(tidy cuffs)

Safety glasses

Safety mask

Safety gloves

Working shoes

rubber boots

1. In order to work safely

Cautions prior to work

The following persons shall not do spraying work.

Person who cannot do normal spraying work due to fatigue, illness, effects of chemicals.

Person who is under the influence of alcohol

Person who is pregnant

Person other than spray operator

Children should be prevented

from using this machine.

Appropriate clothes for the work shall be worn.

I will not

work today.

Liquor

English

10

Cautions when

using this product

This product can be used for the following agricul-

tural work. Avoid use for purposes other than the

following.

1) Spraying chemicls for blight or harmful

insects on general farm crops

2) Spraying chemicls for blight or harmful

insects on fruit trees

3) Spraying chemicls for blight or harmful

insects on crops cultivated in greenhouse

4) Spraying chemicls for blight or harmful

insects on flowers

5) Spraying disinfecting liquid or insecticide on

farm house or chicken house

6) Spraying chemicls and water for blight or

harmful on garden trees, bonsai, or lawns

7) Spraying disinfecting liquid and insecticide

for urban sanitation

8) Spraying chemicls for blight or harmful

insects on flower beds and in parks

9) Spraying weed killer to control weeds

10) Cleaning and spraying water for vegetables

or root vegetables

When transporting by automobile, take action

to prevent the machine from falling.

Chemicals

Read labels of chemicals to be used carefully,

and understand the method of use and cau-

tions. When spraying quantity per tank

(1000m

2

) or if the chemical is mistaken, agri-

cultural chemicals can cause damage.

Store chemicals in a safe place, and be careful

not to break open their containers during trans-

portation.

Treat chemical containers to ensure safety.

Pay attention to the handling of chemicals. If a

chemical enters into eye or mouth, wash it off

with water immediately.

If you feel ill, see a doctor immediately.

According to wind direction, change the spray-

ing method to protect workers and houses.

When spraying chemicals, work from upwind

to downwind. Also give consideration to pre-

vent chemicals from drifting or scattering on

crops, enclosures, fish-breeding ponds, and

houses nearby.

When working in a greenhouse, pay attention

to ventilation.

Spray all of the chemicals and leave none in

the tank.

Do not use this machine when there are people, children, oranimals, near the site.

Because the tank when completely filled with the chemical is very heavy, pay

careful attention not to hurt your lower back when carrying it.

Always adopt a safe working posture when carrying the tank. Do not work at

elevated sites using stairs or ladders while carrying the tank.

CAUTION

Upwind

English

11

Cautions when use this product

Confirmation of standard parts

After opening the package, confirm that all accessories are present.

If accessories are missing or damaged, inform the MARUYAMA Oealer where you purchased the product.

Accessories

Operation manual

Lever cock

Wide nozzle Nozzle pipe

Spraying hose assembly

Warranty Registration Card

Box spanner

English

12

Cautions when you use this product

Fuel

Fuel is Flammable, therefore observe the following to prevent fire.

Don't bring a open flame close to where fuel is supplied or the machine is main-

tained.

When supplying fuel, make sure you stop the engine and wait for the engine to cool

down. If fuel is spilled, wipe it off.

When starting the engine, be more than three meters from the supply tank.

Make sure you observe the mixing ratio of two-cycle engine oil to prevent the pollu-

tion of the environment and machine trouble.

Don't use gasoline alone as fuel.

Engine

Temperature of engine is high during operation and immediately after stopping. You

will get a burn if you touch the muffler, cylinder fins, etc.

When starting the engine, confirm that the discharge valve is securely closed to

prevent expulsion caused by a sudden spray.

Don't touch the spark plug during engine operation. You might get shocked.

Don't operate inside a room. You might suffer by carbon monoxide poisoning.

Don't breathe in the exhaust gas from the engine.

Pump

Chemicals are sprayed from the nozzle at a high pressure. Don't spray them toward

any people or animals.

Checks prior to work

Check for loose screws in each portion.

Loose screws cause accidents.

Adjust length of carrying strap to fit you physique.

Cautions after the use

When preparing chemicls, prepare the necessary amount only in accordance with the established

spraying plan. If excess chemicals are left over, dispose of them as recommended on the chemical

label.

Remove all chemicals left in the tank and return them to their original container. Store it out of reach of

children. Wipe off any chemicals on the machine. They might cause rust or other problems.

To prevent fire, remove all fuel.

When using general-purpose

two-cycle engine oil

Gasoline : Two-cycle engine oil

DANGER

CAUTION

WARNING

English

13

2. Name of each part and function

Chemical tank lid

Wide Nozzle

Nozzle pipe

Cylinder fin

Drain

Lever cock

Knapsack strap

Chemical tank

25Lit (6.61Gallons)

Ignition plug

Recoil starter

Throttle lever

Fuel tank

0.6 Lit (0.16Gallons)

Stop button

English

14

Warning label

Always remove dirt or mud to make the indications legible.

The following alarm labels are attached.

Alarm label

Read operation manual thoroughly.

Make sure you read the operation manual thoroughly prior to use.

Wear a protector.

Wear protectors such as hat, safety glasses, ear plugs during work.

Prohibition of fire

Don't put a open flame close to a place where supplying fuel or

doing maintenance.

Cautions for exhaust gas

Take care not to breathe in exhaust gas from the engine.

Cautions for high temperatures

Muffler of engine, fin of cylinder, etc. are at high temperatures. Don't

touch them.

English

15

3. Handling and operating method

Assembly of nozzle and assembly of waist band

Assembly of nozzle

After confirming the existence of packing, securely tighten nozzle pipe to lever cock, and wide nozzle to

nozzle pipe. Tighten the screw securly after confirming the packing to make sure there is no water

leakage. Over-tightening will cause extrusion or break the packing. Correct tightening pressure is

important.

Wide nozzle Nozzle pipe

Lever cock Spraying hose assembly

Connect opposite side of hose to

discharge opening of the spraying

machine.

Discharge opening

English

16

Close securely

Cover of chemical tank

Oil feeding and mixing

Oil feeding

Make sure you use Fuel and oil mixture

Gasoline : exclusive oil

Use exclusive oil for two-cycle air cooled engines.

Neither overfill nor spill the fuel on to the engine.

DANGER

There is a possibility of fuel igniting. Make sure

you observe the following items.

When filling fuel, stop the engine and

ensure no source of fire such as cigarette is

close to the area.

Don't spill fuel. If fuel is spilled, wipe it all off

at once and start the engine after it is dry.

Don't fill fuel above the standard line. There

is the possibility of leakage.

When a fuel leakage is found, use the

engine after repairs are done.

After filling fuel, make sure you close the

fuel tank cap.

If operating the machine with gasoline

alone, the engine will seize.

Make sure to mix exclusive two-cycle engine

oil in the specified quantity.

The mixing ratio shall be the designated

ratio for exclusive two-cycle engine oil.

Use lead-free gasoline for automobiles for

fuel.

Mixing chemicals

Read the instructions for the chemical to be

used carefully and follow the mixing method

and cautions for use.

CAUTION

After confirming packing for chemical cover,

close the cover securely. Otherwise, chemicals

will spill and you might be covered with them

when you carry the machine on your back.

English

17

Close

Start

Start of engine

CAUTION

When starting the engine, make sure to put water

or chemicals into the chemical tank. Without

water or chemicals in the tank, the pump will break

down.

Perform priming.Push priming pump installed

in front of the carburetor (rear in the specifi-

cation with cell starter) several times slowly,

and confirm that fuel fills the priming pump

and returns to the tank.

1

Fully close the choke. (In hot weather or

when engine is hot, the choke should be

partly open or fully open.)

2

Move throttle lever to medium-and low-

speed position.

3

Set handle of pressure control valve at

"Start" position.

4

Start

Weeding

High

pressure

Spray

English

18

Starter rope

Recoil Starter

Open

Engine will start.

After pulling starting rope gently by two or

three times, pull it hard to start the engine.

[Pulling method for starting rope]

1. Grasp starting rope tight with right hand.

2. Hold chemical tank with left hand.

3. Pull starting rope slowly until resistance is felt.

4. Pull starting rope straight from entrance of

starter.

5. Do not pull starting rope to the end.

6. Don't release starting rope from pulled state,

and let it return to its original state gradually.

5

If the engine does not start by repeated action,

try pulling the rope after fully opening the choke.

CAUTION

If the engine still does not start, refer to

page 23.

Frequent operation of choke when starting the

engine causes too much fuel to be sucked in,

making the engine difficult to start. In that

case, start after making the choke fully open.

After starting the engine, accelerate bit by bit

quickly by opening and closing the throttle

lever several times.

This operation is to bleed air in the carburetor.

When there is air present, there is the possi-

bility of poor acceleration and engine stalling.

Supply fuel prior to use if possible. This will

make starting next time easy.

CAUTION

Return choke slowly.

6

English

Handle of pressure control valve

19

Start

Weeding

High

pressure

Spray

When engine is started and

when pump starts suction.

Weeding

When low-

pressure spray

is required.

(Spray of weed

killer, etc.)

High

pressure

When high

pressure is

required in

particular.

When this

machine is

set at a fixed

position and

longer hose

than

standard is

used.

Spray

Normal spraying work

Operation and shutting down

Operation

Turn the handle of the pressure control valve

until there is sufficient pressure for work

such as spraying weeds (fixed position).

1

Close the nozzle.

1

After confirming spraying state and abnor-

malities in the machine, move throttle lever

to high-speed position.

2

When opening trigger valve, chemicals will

be sprayed from nozzle in a mist.

3

(fixed position)

When setting the pressure control valve handle

to "spray", "weeding" with throttle fully open at

the "high pressure" position of pressure control

valve handle, engine revolutions increase as

pressure decreases. When using this machine

at the "spray", "weeding" position, use at a posi-

tion little bit back from full open throttle.

No-load running shall not be carried out except

for draining operation. Piston packing might be

damaged.

CAUTION

Stop

Return throttle lever to low speed.

2

Push stop button to stop engine.

3

Push

La page charge ...

Maruyama MS0741 Manuel utilisateur

Ce manuel convient également à

Maruyama MS0741 Manuel utilisateur

dans d''autres langues

Documents connexes