LG TLVUW3IU-N Connectivity Unit Mode d'emploi

LG
Marque
LG
Modèle
TLVUW3IU-N Connectivity Unit
Taper
Mode d'emploi
TLVUW3IU-N
(Online Connectivity Unit)
LG Electronics Inc.
What is the OCU(Online Connectivity Unit)
The OCU stands for Online Connectivity Unit
It’s a telematics device that LGE is developing for the Volkswagen vehicles.
It is a small box installed deep inside passenger cars, and in charge of wireless communications in
GSM, WCDMA, and LTE network
It provides voice and data call functions and various online services requested by VW
GNSS Antenna C
onnector
Power, CAN, Audio and
other data connector
GSM/WCDMA/LTE
Antenna Connector
Ethernet Connector
Product Image/ Function
Telematics product supporting Emergency Call/LTE service
Product Image Function
•Emergency Call
•Mobile Online Services
•Positioning/Dead Reckoning
-GPS, GLONASS, Galileo, BeiDou and QZSS
Specification
Supporting Bands
GSM 850/1900
WCMDA B2/B4/B5
LTE FDD B2/B4/B5/B12/B13/B17
Modem Chip Qualcomm MDM9240
GNSS GPS, GLONASS, Galileo, BeiDou and
QZSS
Bluetooth No
WiFi No
Size 145mm x 88mm x 38mm
Weight 333.4g
Power DC 12V , 2A
Specification Dimension
The OCU Features
•Call Services
- Emergency Call
- Automatic Collision Notification Call
- Information Call
- Road Side Assistance Call
•Remote Function Services
- Honking And Flashing
- Speed Alert
- Vehicle Disabling
- Battery Charge Management
- Departure Time Programming
- Door Lock / Unlock
- Pre-Trip Climatisation
- Trip Statistics
- Vehicle Status
•Geo-Fencing
•POI Address Import
•Vehicle Health Report
•Vehicle Tracking
Major ServicesConcept
GNSS
Safety & Security Services Oriented
Telematics Terminal
Emergency Call Automatic Collision
Notification Call
Road Side
Assistance Call
Vehicle Tracking
OCU Equipped Vehicles
Block Diagram
Confidential
Notice
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and
operated with minimum distance 20cm between the radiating element of this device and the user.
IC
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible
gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p) is not more than that necessary for successful communication.
Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un
gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain
est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Conformément à la réglementation
d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user.
Cet appareil doit être installé et utilisé avec une distance minimale de 20 cm entre l'élément rayonnant de cet appareil et l'utilisateur.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

LG TLVUW3IU-N Connectivity Unit Mode d'emploi

LG
Marque
LG
Modèle
TLVUW3IU-N Connectivity Unit
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents