Eurotech ReliaGATE 20-25 Le manuel du propriétaire

User Manual

ReliaGATE 20-25

Multi-Service IoT Gateway - Intel Atom, LTE Cat 4

Rev. 2-1 — 22 November 2019 — REGATE-20-25_Man_ENG_2-1 — ENGLISH

Trademarks

All trademarks, registered trademarks, logos, trade names, products names contained in this document

are the property of their respective owners.

Intended audience of this document

This document is intended for system integrators: skilled persons with a thorough knowledge in linking

together, physically or functionally, different computing systems and software applications to operate as a

coordinated whole in compliance with the applicable regulations.

Revision history

Revision Description Date

1-0 First release 27 June 2016

1-1 Updated SW section 18 November 2016

1-2 Updated:

l Operating temperature for variants -02 to -05

l Serial console port layout

20 December 2016

2-0 General contents update 14 October 2019

2-1 Minor contents update 22 November 2019

ReliaGATE 20-25 User Manual Rev. 2-1 How to get started

HOW TO GET STARTED

To get started with the ReliaGATE 20-25, follow these steps:

1. Read carefully and understand the instructions and warnings contained in this manual.

To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the

instructions and warnings contained in this manual. For more information see: "Safety instructions"

on page9.

Whenever in doubt regarding the correct understanding of this document, contact the Eurotech

Technical Support. For more information see: "How to receive technical assistance" on page17

2. Know the ReliaGATE 20-25 and its interfaces.

For more information see:

l "Product overview" on page23

l "Technical specifications" on page25

l "Interfaces overview" on page39

l "Interfaces in detail" on page45

3. Understand how to login the Administration Console and how to manage the interfaces in

Linux.

For more information see:

l "How to login the Administration Console" on page65

l "How to manage the interfaces in Linux" on page67

4. Install the ReliaGATE 20-25.

For more information see:

l "Mechanical specifications" on page87

l "How to install the product" on page89

5. Supply power to the ReliaGATE 20-25 respecting all safety instructions.

For more information see: "Power supply. How to turn ON/OFF the product" on page93

6. Start developing your IoT applications.

The ReliaGATE 20-25 supports the Eurotech Everyware Software Framework (ESF). ESF is a

smart application container that enables remote management of IoT gateways and provides a wide

range of APIs allowing you to write and deploy your own IoT application.

For more information see:

l "Eurotech Everyware IoT" on page83

l http://esf.eurotech.com/docs.

3 / 102

(This page has been intentionally left blank)

ReliaGATE 20-25 User Manual Rev. 2-1 Contents

CONTENTS

Trademarks 2

Intended audience of this document 2

Revision history 2

How to get started 3

Contents 5

1 Safety instructions 9

1.1 Warning messages used in this document 9

1.1.1 Warning messages for harm to persons 9

1.1.2 Warning messages for damage to property 10

1.2 Warning: power supply safety 10

1.3 Caution: wireless safety 10

1.4 Warning: hot surface 11

1.5 Warning: battery safety 11

2 Consignes de securite 13

2.1 Messages d’avertissement utilisés dans ce document 13

2.1.1 Messages d’avertissement relatifs au dommage aux personnes 13

2.1.2 Messages d’avertissement relatifs aux dommages matériels 14

2.2 Avertissement: sécurité de l’alimentation électrique 14

2.3 Attention: sécurité sur la connectivité sans fil 14

2.4 Avertissement: Surface Chaude 15

2.5 Avertissement: sécurité de la batterie 15

3 How to receive technical assistance 17

3.1 How to ask for technical support 17

3.2 How to send a product for repair 17

4 Comment obtenir une assistance technique 19

4.1 Comment contacter le support technique 19

4.2 Comment retourner un produit en service après vente 19

5 Conventions used in this document 21

5.1 Conventions for signal names 21

5.2 Conventions for signal types 21

6 Product overview 23

6.1 Product description 23

6.2 Intended use and not allowed uses of the product 24

6.2.1 Intended use 24

6.2.2 Not allowed uses 24

6.3 Technical specifications 25

6.3.1 Common features 25

6.3.2 Version-specific features 27

6.4 Optional accessories 28

6.5 Product labels 29

7 Regulatory information 31

7.1 CE marking 31

7.1.1 Safety 31

7.1.2 RoHS 3 compliance 31

7.1.3 WEEE compliance 31

7.1.4 Directive RED 2014/53/EU 31

5 / 102

Contents ReliaGATE 20-25 User Manual Rev. 2-1

7.2 FCC/ISEDRegulatory Notices 34

7.2.1 FCC marking 34

7.2.2 FCC Class B Digital Device Notice 34

7.2.3 FCC restrictions on 5 GHz Wi-Fi usage 35

7.2.4 ISED Canada Regulatory Notices 36

7.2.5 ISED Class B Digital Device Notice 36

7.2.6 RF Radiation Exposure Statement 36

7.2.7 Labeling Information 36

7.3 Antennas List 37

7.4 REACH compliance 37

8 Interfaces overview 39

8.1 Front Side Interfaces overview 39

8.2 Rear Side Interfaces overview 40

8.3 Service Panel and Service Interfaces 41

8.3.1 Service Panel overview 41

8.3.2 Service Interfaces overview 42

8.4 LED Indicators overview 43

8.5 ReliaCELL Interface overview 44

9 Interfaces in detail 45

9.1 Integrated Wi-Fi + Bluetooth (vers: -x3, -x5, -x6, -x7, -x8) 45

9.1.1 Wi-Fi + Bluetooth antenna connector specifications 45

9.1.2 Wi-Fi + Bluetooth Module specifications 45

9.2 Integrated Cellular Modem (vers: -x7 and -x8) 47

9.2.1 ANT 0 and ANT 1 antenna connectors specifications 47

9.2.2 Cellular Modem specifications 47

9.3 MicroSIM card holder 49

9.4 Integrated GNSS (vers: -x6 only) 50

9.4.1 GNSS antenna connector specifications 50

9.4.2 GNSS Receiver specifications 50

9.5 COM 0 and COM 1 51

9.5.1 COM 0 and COM 1 ports specifications 51

9.5.2 COM 0 and COM 1 connectors specifications 51

9.5.3 Cable termination in RS-422/485 mode 52

9.5.4 Failsafe in RS-422/485 mode 52

9.6 ETH 0 and ETH 1 53

9.6.1 ETH 0 and ETH 1 ports specifications 53

9.6.2 ETH 0 and ETH 1 connectors specifications 53

9.7 USB 0, USB 1, USB 2 54

9.7.1 USB 0 and USB 2 connectors specifications 54

9.7.2 USB 1 connector specifications 54

9.8 Digital I/O and CAN 55

9.8.1 Digital Outputs specifications 55

9.8.2 Digital Inputs specifications 56

9.8.3 Digital I/O and CAN connector specifications 57

9.9 Video (for maintenance only) 58

9.9.1 Mini DisplayPort connector specifications 58

9.10 Audio (for maintenance only) 59

9.10.1 Audio interfaces specifications 59

9.10.2 Audio connector specifications 59

9.11 TTL Serial Console 60

9.11.1 TTL Serial Console connector specifications 60

9.12 MicroSD card holder 60

9.13 RTC (Real Time Clock) 61

9.13.1 The RTC Device "/dev/rtc1" 61

6 / 102

ReliaGATE 20-25 User Manual Rev. 2-1 Contents

9.13.2 RTC backup battery 61

9.14 Programmable Pushbutton 62

10 The Linux OS distribution 63

11 How to login the Administration Console 65

11.1 Default credentials 65

11.2 How to login using the Serial Console 65

11.3 How to login via Secure Shell (SSH) 65

11.3.1 How to login via enp3s0 66

11.3.2 How to login via enp4s0 66

11.4 How to change the password 66

12 How to manage the interfaces in Linux 67

12.1 How to know which version of Linux is installed 67

12.2 How Memory and Storage Devices are exposed 67

12.3 How to manage the Integrated Wi-Fi + Bluetooth (vers: -x3, -x5, -x6, -x7, -x8) 68

12.3.1 Wi-Fi 68

12.3.2 Bluetooth 68

12.4 How to manage the Integrated Cellular Modem (vers: -x7 and -x8) 69

12.5 How to manage the Integrated GNSS (vers: -x6 only) 69

12.6 How to manage the CAN port 70

12.6.1 How to Enable the CAN Bus 5V 70

12.6.2 How to Setup a CAN Port 70

12.6.3 How to Send / Receive a Message Via a CAN Port 70

12.7 How the TTL Serial Console is exposed 70

12.8 How to manage the COM ports 71

12.8.1 How to Set the RS-232/422/485 Mode 71

12.8.2 How to Test a Serial Port 73

12.9 How to manage the USB ports 74

12.10 How to manage the Digital I/Os 75

12.11 How to manage the LED Indicators 76

12.11.1 How to Drive a LED 76

12.12 How to manage the Ignition Key 77

12.12.1 Note about CPU sleep states 77

12.13 How the Ethernet ports are exposed 78

12.14 How the RTC is exposed 79

12.14.1 How to Use the 256 User-Available Bytes 79

12.14.2 How to Manage the ReliaGATE 20-25 Sleep Mode 79

12.15 How the Watchdog is exposed 80

12.15.1 How to Manage the Watchdog Using the C Programming Language 80

12.15.2 How to Manage the Watchdog From the Command Line 80

12.15.3 For Further Information 81

12.16 How to print the Accelerometer information 81

12.17 How to read the Internal Temperature Sensor 82

12.18 How to know the Programmable Pushbutton status 82

13 Eurotech Everyware IoT 83

13.1 Everyware Software Framework (ESF) 83

13.2 The ESF Web UI 84

13.3 The ESF Wires application 85

13.4 Everyware Cloud (EC) 86

13.5 For more information 86

14 Mechanical specifications 87

14.1 Enclosure dimensions 87

14.2 Optional Mounting Bracket dimensions 88

7 / 102

Contents ReliaGATE 20-25 User Manual Rev. 2-1

15 How to install the product 89

15.1 Choose the installation method 89

15.2 Respect the clearance space 90

15.3 Optional: How to install the product using the Mounting Bracket 91

16 Power supply. How to turn ON/OFF the product 93

16.1 Power supply specifications 93

16.1.1 Requirements for external fuse 93

16.1.2 Requirements for interconnecting cables 93

16.2 Power IN connector specifications 93

16.3 The Ignition Key (Key Signal) 94

16.4 How to supply power and turn ON the product 94

16.5 How to turn OFF the product 96

16.6 How to reduce the power consumption of the product 96

16.7 How to trigger a hardware reset of the product 96

17 How to maintain the product 97

17.1 How to safely remove the power supply 97

17.2 How to verify the installation of the product 97

17.3 How to clean the product 97

Appendix: How to enter the BIOS 99

Notes 101

8 / 102

ReliaGATE 20-25 User Manual Rev. 2-1 1 Safety instructions

1 SAFETY INSTRUCTIONS

IMPORTANT: Read carefully and understand the instructions and warnings contained in this

document before installing / using the product. Keep this document for future reference.

To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions

and warnings contained in this document.

Failure to comply with the instructions and warnings contained this document, violates the standards of

safety, design, manufacture, and intended use of the product.

Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings

contained this document.

Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech

Technical Support (for more information see "How to receive technical assistance" on page17).

1.1 Warning messages used in this document

1.1.1 Warning messages for harm to persons

To indicate an imminently hazardous situation which, if not avoided, will result in death or

serious injury, the following message is used:

DANGER

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT

Text that explains how to avoid this hazard

To indicate a potentially hazardous situation which, if not avoided, could result in death or

serious injury, the following message is used:

WARNING

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT

Text that explains how to avoid this hazard

To indicate a potentially hazardous situation which, if not avoided, could result in minor or

moderate injury, the following message is used:

CAUTION

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT

Text that explains how to avoid this hazard

9 / 102

1 Safety instructions ReliaGATE 20-25 User Manual Rev. 2-1

1.1.2 Warning messages for damage to property

To indicate potential risks of damage to the supported product (or to other property), the

following message is used:

NOTICE

Sign

(if necessary)

Text that explains how to avoid damaging the supported product (or other

property)

1.2 Warning: power supply safety

WARNING

ELECTRIC SHOCK HAZARD

Failure to supply power correctly or to follow all operating instructions correctly, may create an

electric shock hazard, which could result in personal injury or loss of life, and / or damage the

equipment or other property.

To avoid injuries and safely supply power to the product, complete the following steps:

1. Observe all the instructions for safety, installation, and operation

2. Make sure your hands are dry

3. Make sure that all the cables to use:

a. Are in good condition

b. Meet the product requirements and comply with the relevant standards and

regulations

4. Position cables with care. Do not position cables in places where they may be trampled

or compressed

5. Make sure that the power-points and plugs are in good condition before using them

6. Do not overload the power-points and plugs

7. Make sure that the product maintains a proper grounding connection

8. Use a power supply that meets the product requirements and complies with the relevant

standards and regulations. In case of uncertainties, contact the Eurotech Technical

Support Team (for more information see "How to receive technical assistance" on

page17)

9. Connect power after the installation of the system has been completed

10. Never connect or disconnect the cables with the system or the external apparatus

switched ON.

1.3 Caution: wireless safety

The antennas used with the product have to be installed with care, avoiding any interference with

other electronic devices and keeping a distance from persons greater than 20 cm. If these

requirements cannot be satisfied, the system integrator has to assess the final product with

respect to SAR regulations.

10 / 102

ReliaGATE 20-25 User Manual Rev. 2-1 1 Safety instructions

1.4 Warning: hot surface

WARNING

HOT SURFACE - BURN HAZARD - DO NOT TOUCH

Product's enclosure is hot while the product is turned ON.

To avoid burn hazard, always allow the product's enclosure to cool before

touching it.

The label "WARNING: HOT SURFACE" is placed below the product label, as

displayed in the following figure:

Ref# Description

1 "WARNING: HOT SURFACE" Label

2 Product Label

1.5 Warning: battery safety

WARNING

SERIOUS HARM IF BATTERY IS USED INCORRECTLY.

Before using the battery always refer to battery manufacturer's instructions for safety.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

Use and replace only with correct size and type.

Dispose of used battery according to battery manufacturer's instructions.

11 / 102

(This page has been intentionally left blank)

ReliaGATE 20-25 User Manual Rev. 2-1 2 Consignes de securite

2 CONSIGNES DE SECURITE

IMPORTANT: Lire attentivement et bien respecter les instructions et les avertissements contenus

dans ce document avant d'installer / d'utiliser le produit. Conserver ce document pour s'y référer

à l'avenir.

Pour éviter les risques de blessures, de choc électrique, d'incendie ou de détérioration du matériel, bien

suivre les instructions et les avertissements contenus dans ce document.

Le non-respect des instructions et des avertissements contenus dans ce document constitue une violation

des normes de sécurité, de conception, de fabrication et d'utilisation prévue du produit.

Eurotech rejette toute responsabilité pour les dommages causés en cas de non-respect des instructions et

des avertissements contenus dans ce document.

En cas de doute sur la compréhension de ce document, contacter le Support Technique d’ Eurotech (pour

plus d’informations voir "Comment obtenir une assistance technique" page 19).

2.1 Messages d’avertissement utilisés dans ce document

2.1.1 Messages d’avertissement relatifs au dommage aux personnes

Pour signaler une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort

ou un préjudice grave le message suivant est utilisé:

DANGER

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES

Texte expliquant comment éviter ce danger

Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait

entraîner la mort ou un préjudice grave le message suivant est utilisé:

AVERTISSEMENT

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES

Texte expliquant comment éviter ce danger

Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait

entraîner un préjudice mineur ou modéré le message suivant est utilisé:

ATTENTION

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES

Texte expliquant comment éviter ce danger

13 / 102

2 Consignes de securite ReliaGATE 20-25 User Manual Rev. 2-1

2.1.2 Messages d’avertissement relatifs aux dommages matériels

Pour signaler les risques potentiels de détérioration du produit (ou des produits annexes), le

message suivant est utilisé:

AVIS

Signal

(si besoin)

Texte expliquant comment éviter d'endommager le produit (ou des produits

annexes)

2.2 Avertissement: sécurité de l’alimentation électrique

AVERTISSEMENT

RISQUE DE CHOC ÉLECTRIQUE

Une alimentation électrique incorrecte peut créer un risque de choc électrique, pouvant

entraîner des blessures corporelles ou la perte de vies humaines, et / ou endommager le

produit ou d'autres biens.

Pour éviter les blessures et brancher l'appareil en toute sécurité, procéder comme suit:

1. Respecter toutes les consignes de sécurité, d'installation et d'utilisation

2. S'assurer que les mains sont sèches

3. S'assurer que tous les câbles utilisés:

a. Sont en bon état

b. Répondent aux exigences du produit et soient conformes aux normes et

réglementations en vigueur

4. Positionner les câbles avec soin. Ne pas les placer dans des endroits où ils risquent

d'être piétinés ou comprimés

5. S’assurer que les prises de courant et les connecteurs d’alimentation sont en bon état

avant de les utiliser

6. Ne pas surcharger les prises de courant et les connecteurs d’alimentation

7. S'assurer que le produit est correctement relié à la terre

8. Utiliser une alimentation électrique conforme aux exigences du produit et conforme aux

normes et réglementations en vigueur. En cas d'incertitude, contacter l'équipe

d'assistance technique d'Eurotech (pour plus d'informations, voir "Comment obtenir une

assistance technique" page 19)

9. Ne Brancher l'alimentation électrique qu’une fois l'installation du système terminée

10. Ne jamais brancher ou débrancher les câbles lorsque le système ou un appareil

périphérique sous tension.

2.3 Attention: sécurité sur la connectivité sans fil

Les antennes utilisées avec le produit doivent être installées avec soin, en évitant toute

interférence avec d'autres appareils électroniques et à au moins 20 cm des personnes. Si ces

exigences ne peuvent être satisfaites, l'intégrateur du système doit évaluer le produit final par

rapport à la réglementation SAR.

14 / 102

ReliaGATE 20-25 User Manual Rev. 2-1 2 Consignes de securite

2.4 Avertissement: Surface Chaude

AVERTISSEMENT

SURFACE CHAUDE - RISQUE DE BRÛLURE - NE PAS TOUCHER

Le boîtier du produit est chaud lorsque le produit est sous tension.

Pour éviter tout risque de brûlure, laissez toujours le boîtier du produit refroidir

avant de le toucher.

L'étiquette "AVERTISSEMENT: SURFACE CHAUDE" est placée sous l'étiquette

du produit, comme indiqué dans la figure suivante:

Réf# Description

1 Étiquette "AVERTISSEMENT: SURFACE CHAUDE"

2 Étiquette du Produit

2.5 Avertissement: sécurité de la batterie

AVERTISSEMENT

BLESSURES GRAVES SI LA BATTERIE EST UTILISÉE DE MANIÈRE INCORRECTE.

Avant d’utiliser la batterie, reportez-vous toujours aux instructions du fabricant de la batterie

pour plus de sécurité.

ATTENTION

LE REMPLACEMENT DE LA BATTERIE PAR D'AUTRE D'UN TYPE INCORRECT PRÉSENTE

UN RISQUE D'EXPLOSION.

N'utilisez que de batterie de la dimension et du type qui convient.

Éliminez la batterie usagées conformément aux instructions du fabricant.

15 / 102

(This page has been intentionally left blank)

ReliaGATE 20-25 User Manual Rev. 2-1 3 How to receive technical assistance

3 HOW TO RECEIVE TECHNICAL ASSISTANCE

3.1 How to ask for technical support

To ask for technical support, complete the following steps

1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/

2. Submit a support request

3. Wait for the reply from the Support Team with the information you required

3.2 How to send a product for repair

Any product returned to Eurotech, that is found to be damaged due to inadequate packaging, will

not be covered by the warranty.

To send a product for repair, complete the following steps:

1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/

2. Submit an RMA request

3. Wait for the reply from the RMA Department. It will contain:

l The RMA number

l The shipping information

4. Pack the product adequately using anti-static material and place it in a sturdy box with enough

packing material to protect it from shocks and vibrations

5. Ship the product to Eurotech following the information received from the RMA Department.

17 / 102

(This page has been intentionally left blank)

ReliaGATE 20-25 User Manual Rev. 2-1 4 Comment obtenir une assistance technique

4 COMMENT OBTENIR UNE ASSISTANCE TECHNIQUE

4.1 Comment contacter le support technique

Pour demander un support technique, procéder comme suit:

1. Se connecter au Support Eurotech sur: https://support.eurotech.com/

2. Envoyer une demande d’assistance

3. Attendre la réponse de l'équipe de support avec les informations requises

4.2 Comment retourner un produit en service après vente

Tout produit renvoyé à Eurotech, qui se trouve endommagé en raison d'un emballage inadéquat,

ne sera pas couvert par la garantie.

Pour retourner un produit en Service Après Vente, procéder comme suit:

1. Se connecter au Support Eurotech sur: https://support.eurotech.com/

2. Faire une demande de RMA

3. Attendre la réponse du service RMA qui indiquera:

l Le numéro de RMA

l Les informations pour l’expédition

4. Emballer le produit de manière adéquate en utilisant des protections antistatiques et le placer dans

un conditionnement solide contenant suffisamment de matériau d'emballage pour le protéger des

chocs et des vibrations

5. Expédier le produit chez Eurotech selon les informations reçues par mail.

19 / 102

(This page has been intentionally left blank)

La page est en cours de chargement...

Eurotech ReliaGATE 20-25 Le manuel du propriétaire

Eurotech ReliaGATE 20-25 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents