Eurotech ReliaGATE 10-12 Le manuel du propriétaire

User manual

ReliaGATE 10-12-6x

IoT Edge Gateway TI AM335x, LTE Cat 1

Rev. 1-0 —

15 July 2019 — REGATE-10-12-6x_Man_ENG_1-0 — ENGLISH

Trademarks

All trademarks, registered trademarks, logos, trade names, products names contained in this document

are the property of their respective owners.

Intended audience of this document

This document is intended for system integrators: skilled persons with a thorough knowledge in linking

together, physically or functionally, different computing systems and software applications to operate as a

coordinated whole in compliance with the applicable regulations.

Revision history

Revision Description Date

1-0 First release 15 July 2019

ReliaGATE 10-12 User manual Rev. 1-0 How to get started

HOW TO GET STARTED

To get started with the ReliaGATE 10-12, follow these steps:

1. Read carefully and understand the instructions and warnings contained in this manual.

To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the

instructions and warnings contained in this manual.

For more information see: "Safety instructions" on page11.

Whenever in doubt regarding the correct understanding of this document, contact the Eurotech

Technical Support.

For more information see: "How to receive technical assistance" on page19

2. Know the ReliaGATE 10-12 and its interfaces.

For more information see:

l "Product overview" on page25

l "Technical specifications" on page27

l "Interfaces overview" on page37

l "Interfaces in detail" on page43

3. Understand how to login the Administration Console and how to manage the interfaces in

Linux.

For more information see:

l "How to login the Administration Console" on page67

l "How to manage the interfaces in Linux" on page69

4. Install the ReliaGATE 10-12.

For more information see:

l "Mechanical specifications" on page95

l "How to install the product" on page97

5. Supply power to the ReliaGATE 10-12 respecting all safety instructions.

For more information see: "Power supply. How to turn on/off and reset the product" on page103

6. Start developing your IoT applications.

The ReliaGATE 10-12 supports the Eurotech Everyware Software Framework (ESF). ESF is a

smart application container that enables remote management of IoT gateways and provides a wide

range of APIs allowing you to write and deploy your own IoT application.

For more information see:

l "Eurotech Everyware IoT" on page91

l http://esf.eurotech.com/docs.

3 / 116

(This page has been intentionally left blank)

ReliaGATE 10-12 User manual Rev. 1-0 Contents

CONTENTS

Trademarks 2

Intended audience of this document 2

Revision history 2

How to get started 3

Contents 5

1 Safety instructions 11

1.1 Warning messages used in this document 11

1.1.1 Warning messages for harm to persons 11

1.1.2 Warning messages for damage to property 12

1.2 Warning: power supply safety 12

1.3 Caution: wireless safety 12

1.4 Warning: battery safety 13

2 Consignes de securite 15

2.1 Messages d’avertissement utilisés dans ce document 15

2.1.1 Messages d’avertissement relatifs au dommage aux personnes 15

2.1.2 Messages d’avertissement relatifs aux dommages matériels 16

2.2 Avertissement: sécurité de l’alimentation électrique 16

2.3 Attention: sécurité sur la connectivité sans fil 16

2.4 Avertissement: Sécurité de la Batterie 17

3 How to receive technical assistance 19

3.1 How to ask for technical support 19

3.2 How to send a product for repair 19

4 Comment obtenir une assistance technique 21

4.1 Comment contacter le support technique 21

4.2 Comment retourner un produit en service après vente 21

5 Conventions used in this document 23

5.1 Conventions for signal names 23

5.2 Conventions for signal types 23

6 Product overview 25

6.1 Product description 25

6.2 Intended use and not allowed uses of the product 26

6.2.1 Intended use 26

6.2.2 Not allowed uses 26

6.3 Technical specifications 27

6.4 Optional accessories 29

6.5 Product labels 30

7 Norms and certifications 31

7.1 CE marking 31

7.2 Directive RED 2014/53/EU 31

7.2.1 Modification statement 31

7.3 Statement for class A equipment (only for version: -61) 31

7.4 Statement for KN 32/35 (only for version: -61) 31

7.5 FCC marking 32

7.6 FCC/ISEDregulatory notices 32

7.6.1 Modification statement 32

7.6.2 ISED Canada regulatory notices 32

5 / 116

Contents ReliaGATE 10-12 User manual Rev. 1-0

7.6.3 RF radiation exposure statement 33

7.6.4 FCC class B digital device notice 33

7.6.5 ISED class B digital device notice 34

7.6.6 Labeling information 34

7.7 Restrictions on 5 GHz Wi-Fi usage 35

7.7.1 EU restrictions on 5 GHz Wi-Fi usage 35

7.7.2 FCC restrictions on 5 GHz Wi-Fi usage 35

7.8 Antennas list 36

7.9 RoHS 3 compliance 36

7.10 REACH compliance 36

7.11 WEEE compliance 36

8 Interfaces overview 37

8.1 Front Side Interfaces overview 37

8.2 Rear Side Interfaces overview 38

8.2.1 Service Panel Interfaces 39

8.3 Right Side Interface overview 40

8.4 Left Side Interface overview 41

8.5 LED Indicators overview 42

9 Interfaces in detail 43

9.1 Wi-Fi and Bluetooth (vers: -62, -65, -66) 43

9.1.1 Wi-Fi specifications 43

9.1.1.1 2.4 GHZ TX output power 43

9.1.1.2 5 GHZ TX output power 43

9.1.2 Bluetooth specifications 44

9.1.3 BLE specifications 44

9.1.4 Antennas connectors specifications 44

9.2 Internal Cellular Modem (vers: -63, -64, -65, -66) 45

9.2.1 Internal Cellular Modem specifications (according to product versions) 45

9.2.1.1 Product features 45

9.2.1.2 LTE data 45

9.2.1.3 Supported RF bands 45

9.2.1.4 TX output power 45

9.2.2 LTE - single antenna operation notes 45

9.2.2.1 Main antenna requirements 46

9.2.2.2 Second antenna requirements (for antenna diversity) 46

9.2.3 Antennas connectors specifications 47

9.2.4 The MicroSIM card holders 48

9.2.4.1 How to insert / remove the MicroSIM card 48

9.3 Digital I/Os 50

9.3.1 Insulated Digital Inputs 50

9.3.1.1 Electrical specifications 50

9.3.1.2 Electrical schematics 50

9.3.2 Insulated Digital Outputs 51

9.3.2.1 Electrical specifications 51

9.3.2.2 Electrical schematics 51

9.3.3 Digital I/Os connector specifications 51

9.4 COM 0 and COM 1 52

9.4.1 Note for termination resistors for COM 0 in RS-485 mode 52

9.4.2 Note for termination resistors for COM 1 in RS-485 mode 52

9.4.3 Note for fail-safe resistors for COM 0 in RS-485 mode 52

9.4.4 Note for fail-safe resistors for COM 1 in RS-485 mode 53

9.4.4.1 Switches meaning 53

9.4.5 Note for RS-485 half duplex (only for COM 0 in RS-485 mode) 53

9.4.6 COM 0 and COM 1 connector specifications 54

6 / 116

ReliaGATE 10-12 User manual Rev. 1-0 Contents

9.5 CAN 0 and CAN 1 55

9.5.1 CAN 0 and CAN 1 connector specifications 55

9.6 ETH 0 and ETH 1 56

9.6.1 Ethernet specifications 56

9.6.2 ETH 0 and ETH 1 connectors specifications 56

9.7 USB 0, USB 1, USB 2 57

9.7.1 USB 0 and USB 1 connectors specifications 57

9.7.2 USB 2 connector specifications 57

9.8 Expansion connector 58

9.8.1 Expansion connector specifications 58

9.9 TTL Serial Console 59

9.9.1 TTL Serial Console connector specifications 59

9.10 MicroSD card holder 60

9.10.1 How to insert / remove the MicroSD card in the holder 60

9.11 RTC (Real Time Clock) 61

9.11.1 The RTC Device "/dev/rtc1" 61

9.11.2 The RTC backup battery 61

9.11.2.1 How to replace / install the battery 61

9.11.2.2 How to enable/disable the battery 62

9.12 Watchdog 62

9.13 Accelerometer and Gyroscope 62

9.14 Programmable pushbutton 62

9.15 The TPM 63

10 The Software 65

10.1 The Linux OS distribution 65

10.2 The bootloader procedure 65

10.3 How to create and use a bootable MicroSD card for a Linux release 65

11 How to login the Administration Console 67

11.1 Default credentials 67

11.2 How to login using the Serial Console 67

11.3 How to Login Via Secure Shell (SSH) 67

11.3.1 How to Login Via eth0 68

11.3.2 How to Login via eth1 68

11.4 How to change the password 68

12 How to manage the interfaces in Linux 69

12.1 How to drive the GPIOs: the GPIO Utility 69

12.2 How to know which version of Linux is installed 70

12.3 How the storage memory is exposed 70

12.4 How to manage Wi-Fi and Bluetooth 70

12.5 How to manage the Internal Cellular Modem 71

12.5.1 How to select the MicroSIM card holder to use 71

12.5.2 Note for LE910-NA1 Modem: AT&T / Verizon firmware support 71

12.5.2.1 How to select the AT&T firmware 72

12.5.2.2 How to select the Verizon firmware 72

12.5.3 How to disable/enable the diversity (CELL DIV) function 72

12.6 How to manage the CAN ports 73

12.6.1 How to enable the CAN Bus 5V 73

12.6.2 How to setup a CAN port 73

12.6.3 How to send/receive a message via a CAN port 73

12.7 How the TTL Serial Console is exposed 73

12.8 How to manage the COM ports 74

12.8.1 How to set the termination resistors for COM 0 in RS-485 mode 74

12.8.2 How to set the RS-422/485 modes for COM 0 74

7 / 116

Contents ReliaGATE 10-12 User manual Rev. 1-0

12.8.2.1 How to use the ethsetserial utility to configure the COM ports 74

12.8.2.2 How to implement the ioctl in the source code to configure the COM ports 75

12.8.3 How to set the RS-232/485 modes for COM 1 78

12.8.3.1 How to use the ethsetserial utility to configure the COM ports 78

12.8.3.2 How to implement the ioctl in the source code to configure the COM ports 79

12.8.4 How to test a serial port 81

12.9 How to manage the Digital I/Os 82

12.10 How to manage the LED Indicators 82

12.11 How the Ethernet ports are exposed 82

12.12 How to enable the 3.3V and 5V power supply on the Expansion connector 83

12.13 How the RTC is exposed 84

12.14 How the Watchdog is exposed 85

12.14.1 How to manage the Watchdog using the C programming language 85

12.14.2 How to manage the Watchdog from the command line 85

12.14.3 For more information 86

12.15 How to output Accelerometer and Gyroscope values 86

12.16 How to read the Internal Temperature Sensor 87

12.17 How to know the programmable pushbutton status 87

12.18 The TPM and the tpm2-tools package 87

12.19 Optional: How to manage the ReliaCELL power supply 87

13 How to compile custom software 89

13.1 How to setup the toolchain 89

13.2 How to use the toolchain to compile custom software 89

14 Eurotech Everyware IoT 91

14.1 Everyware Software Framework (ESF) 91

14.2 The ESF Web UI 92

14.3 The ESF Wires application 93

14.4 Everyware Cloud (EC) 94

14.5 For more information 94

15 Mechanical specifications 95

15.1 Product mechanical dimensions 95

15.2 Mounting bracket mechanical dimensions 96

16 How to install the product 97

16.1 How to install the product using the Mounting Bracket 97

16.2 How to replace the Mounting Bracket with the DIN Rail Mounting Clip or vice versa 98

16.2.1 How to replace the Mounting Bracket with the DIN Rail Mounting Clip 98

16.2.2 How to replace the DIN Rail Mounting Clip with the Mounting Bracket 99

16.2.3 Which screws are used with the Mounting Bracket or with the DIN Rail Mounting Clip 100

16.3 How to install/remove the product on/from a DIN Rail 101

16.3.1 How to install the product on a DIN Rail 101

16.3.2 How to remove the product from a DIN Rail 101

17 Power supply. How to turn on/off and reset the product 103

17.1 Power supply specifications 103

17.2 Power IN connector specifications 103

17.3 How to supply power and turn ON the product 104

17.4 How to turn OFF the product 105

17.5 How to reduce the power consumption of the product 105

17.6 How to hardware reset the product 105

18 How to maintain the product 107

18.1 How to safely remove the power supply 107

18.2 How to verify the installation of the product 107

8 / 116

ReliaGATE 10-12 User manual Rev. 1-0 Contents

18.3 How to clean the product 107

Appendix 1: Advanced boot options 109

1.1 Advanced boot options availability 109

1.1.1 How to configure a boot option 109

1.1.2 How to gain access to the Bootloader CLI 109

1.1.3 How to change the default boot option 110

1.2 The production fitImage 110

1.2.1 How to define the variants 110

1.2.2 How to manually configure the system to boot from a different DTB within the current fitImage 110

Appendix 2: Expansion connector pin map with respect to device tree pin assignment 113

Notes 115

9 / 116

(This page has been intentionally left blank)

ReliaGATE 10-12 User manual Rev. 1-0 1 Safety instructions

1 SAFETY INSTRUCTIONS

IMPORTANT: Read carefully and understand the instructions and warnings contained in this

document before installing / using the product. Keep this document for future reference.

To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions

and warnings contained in this document.

Failure to comply with the instructions and warnings contained this document, violates the standards of

safety, design, manufacture, and intended use of the product.

Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings

contained this document.

Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech

Technical Support (for more information see "How to receive technical assistance" on page19).

1.1 Warning messages used in this document

1.1.1 Warning messages for harm to persons

To indicate an imminently hazardous situation which, if not avoided, will result in death or

serious injury, the following message is used:

DANGER

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT

Text that explains how to avoid this hazard

To indicate a potentially hazardous situation which, if not avoided, could result in death or

serious injury, the following message is used:

WARNING

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT

Text that explains how to avoid this hazard

To indicate a potentially hazardous situation which, if not avoided, could result in minor or

moderate injury, the following message is used:

CAUTION

Sign

(if necessary)

TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT

AVOIDING IT

Text that explains how to avoid this hazard

11 / 116

1 Safety instructions ReliaGATE 10-12 User manual Rev. 1-0

1.1.2 Warning messages for damage to property

To indicate potential risks of damage to the supported product (or to other property), the

following message is used:

NOTICE

Sign

(if necessary)

Text that explains how to avoid damaging the supported product (or other

property)

1.2 Warning: power supply safety

WARNING

ELECTRIC SHOCK HAZARD

Failure to supply power correctly or to follow all operating instructions correctly, may create an

electric shock hazard, which could result in personal injury or loss of life, and / or damage the

equipment or other property.

To avoid injuries and safely supply power to the product, complete the following steps:

1. Observe all the instructions for safety, installation, and operation

2. Make sure your hands are dry

3. Make sure that all the cables used:

a. Are in good condition before using them

b. Meet the product requirements and comply with the relevant standards and

regulations

4. Position cables with care. Do not position cables in places where they may be trampled

or compressed by objects placed on them

5. Make sure that the power-points and plugs are in good condition before using them

6. Do not overload the power-points and plugs

7. Make sure that the product maintains a proper grounding connection

8. Use a power supply that meets the product requirements and complies with the relevant

standards and regulations. In case of uncertainties, contact the Eurotech Technical

Support Team (for more information see "How to receive technical assistance" on

page19)

9. Connect power after the installation of the system has been completed

10. Never connect or disconnect the cables with the system or the external apparatus

switched ON.

1.3 Caution: wireless safety

The antennas used in the product have to be installed with care, to avoid any interference with

other electronic devices and to guarantee a minimum distance from the body (20 cm). In case of

this requirement cannot be satisfied, the system integrator has to assess the final product against

the SAR regulations.

12 / 116

ReliaGATE 10-12 User manual Rev. 1-0 1 Safety instructions

1.4 Warning: battery safety

WARNING

SERIOUS HARM IF BATTERY IS USED INCORRECTLY

Before using the battery always refer to battery manufacturer's instructions for safety.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE

Use and replace only with correct size and type.

Dispose of used batteries according to battery manufacturer's instructions.

13 / 116

(This page has been intentionally left blank)

ReliaGATE 10-12 User manual Rev. 1-0 2 Consignes de securite

2 CONSIGNES DE SECURITE

IMPORTANT: Lire attentivement et bien respecter les instructions et les avertissements contenus

dans ce document avant d'installer / d'utiliser le produit. Conserver ce document pour s'y référer

à l'avenir.

Pour éviter les risques de blessures, de choc électrique, d'incendie ou de détérioration du matériel, bien

suivre les instructions et les avertissements contenus dans ce document.

Le non-respect des instructions et des avertissements contenus dans ce document constitue une violation

des normes de sécurité, de conception, de fabrication et d'utilisation prévue du produit.

Eurotech rejette toute responsabilité pour les dommages causés en cas de non-respect des instructions et

des avertissements contenus dans ce document.

En cas de doute sur la compréhension de ce document, contacter le Support Technique d’ Eurotech (pour

plus d’informations voir "Comment obtenir une assistance technique" page 21).

2.1 Messages d’avertissement utilisés dans ce document

2.1.1 Messages d’avertissement relatifs au dommage aux personnes

Pour signaler une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort

ou un préjudice grave le message suivant est utilisé:

DANGER

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES

Texte expliquant comment éviter ce danger

Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait

entraîner la mort ou un préjudice grave le message suivant est utilisé:

AVERTISSEMENT

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES

Texte expliquant comment éviter ce danger

Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait

entraîner un préjudice mineur ou modéré le message suivant est utilisé:

ATTENTION

Signal

(si besoin)

TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES

Texte expliquant comment éviter ce danger

15 / 116

2 Consignes de securite ReliaGATE 10-12 User manual Rev. 1-0

2.1.2 Messages d’avertissement relatifs aux dommages matériels

Pour signaler les risques potentiels de détérioration du produit (ou des produits annexes), le

message suivant est utilisé:

AVIS

Signal

(si besoin)

Texte expliquant comment éviter d'endommager le produit (ou des produits

annexes)

2.2 Avertissement: sécurité de l’alimentation électrique

AVERTISSEMENT

RISQUE DE CHOC ÉLECTRIQUE

Une alimentation électrique incorrecte peut créer un risque de choc électrique, pouvant

entraîner des blessures corporelles ou la perte de vies humaines, et / ou endommager le

produit ou d'autres biens.

Pour éviter les blessures et brancher l'appareil en toute sécurité, procéder comme suit:

1. Respecter toutes les consignes de sécurité, d'installation et d'utilisation

2. S'assurer que les mains sont sèches

3. S'assurer que tous les câbles utilisés:

a. Sont en bon état avant leur utilisation

b. Répondent aux exigences du produit et soient conformes aux normes et

réglementations en vigueur

4. Positionner les câbles avec soin. Ne pas les placer dans des endroits où ils risquent

d'être piétinés ou comprimés par des objets

5. S’assurer que les prises de courant et les connecteurs d’alimentation sont en bon état

avant de les utiliser

6. Ne pas surcharger les prises de courant et les connecteurs d’alimentation

7. S'assurer que le produit est correctement relié à la terre

8. Utiliser une alimentation électrique conforme aux exigences du produit et conforme aux

normes et réglementations en vigueur. En cas d'incertitude, contacter l'équipe

d'assistance technique d'Eurotech (pour plus d'informations, voir "Comment obtenir une

assistance technique" page 21)

9. Ne Brancher l'alimentation électrique qu’une fois l'installation du système terminée

10. Ne jamais brancher ou débrancher les câbles lorsque le système ou un appareil

périphérique sous tension.

2.3 Attention: sécurité sur la connectivité sans fil

Les antennes utilisées dans le produit doivent être installées avec soin et à une distance

minimale de 20 cm de tout autre appareil électronique afin d'éviter toute interférence. Si cette

exigence ne peut être satisfaite, l'intégrateur de système doit évaluer le produit final par rapport à

la réglementation DAS.

16 / 116

ReliaGATE 10-12 User manual Rev. 1-0 2 Consignes de securite

2.4 Avertissement: Sécurité de la Batterie

AVERTISSEMENT

BLESSURES GRAVES SI LA BATTERIE EST UTILISÉE DE MANIÈRE INCORRECTE

Avant d’utiliser la batterie, reportez-vous toujours aux instructions du fabricant de la batterie

pour plus de sécurité.

ATTENTION

RISQUE D’EXPLOSION SI LA BATTERIE DE REMPLACEMENT NE RESPECTE PAS LES

CARACTÉRISTIQUES DE LA BATTERIE INITIALE.

N'utilisez que des batteries de dimensions et de caractéristiques préconisées.

Respectez les instructions du constructeur pour le recyclage de la batterie usagée.

17 / 116

(This page has been intentionally left blank)

ReliaGATE 10-12 User manual Rev. 1-0 3 How to receive technical assistance

3 HOW TO RECEIVE TECHNICAL ASSISTANCE

3.1 How to ask for technical support

To ask for technical support, complete the following steps

1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/

2. Submit a support request

3. Wait for the reply from the Support Team with the information you required

3.2 How to send a product for repair

Any product returned to Eurotech, that is found to be damaged due to inadequate packaging, will

not be covered by the warranty.

To send a product for repair, complete the following steps:

1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/

2. Submit an RMA request

3. Wait for the reply from the RMA Department. It will contain:

l The RMA number

l The shipping information

4. Pack the product adequately using anti-static material and place it in a sturdy box with enough

packing material to protect it from shocks and vibrations

5. Ship the product to Eurotech following the information received from the RMA Department.

19 / 116

(This page has been intentionally left blank)

La page charge ...

Eurotech ReliaGATE 10-12 Le manuel du propriétaire

Eurotech ReliaGATE 10-12 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents