Eurotech ReliaGATE 10-12 Le manuel du propriétaire

Taper
Le manuel du propriétaire
User manual
ReliaGATE 10-12-6x
IoT Edge Gateway TI AM335x, LTE Cat 1
Rev. 2-4 9 March 2021 REGATE-10-12-6x_Man_ENG_2-4 ENGLISH
Trademarks
All trademarks, registered trademarks, logos, trade names, products names contained in this document
are the property of their respective owners.
Intended audience of this document
This document is intended for system integrators: skilled persons with a thorough knowledge in linking
together, physically or functionally, different computing systems and software applications to operate as a
coordinated whole in compliance with the applicable regulations.
Revision history
Revision Description Date
1-0 First release 15 July 2019
2-0 Updated information about CAN termination resistors
Added APAC variant
Added new antennas sets
Added information for versions:
l REGATE-10-12-65G
l REGATE-10-12-66G
l REGATE-10-12-67G
29 June 2020
2-1 Updated sections:
l 9.8 "USB 0, USB 1, USB 2"
l 10 "The software"
l 11.1 "Default credentials"
l 11.3.2 "How to login via eth1"
Added Notice about LPS power supply
Added section:
l "Canadian Representative contact information" in chapter 7.4
12 November 2020
2-2 Updates sections:
l 6.3 "Technical specifications"
l 6.4 "Optional accessories"
l 7.5 "Antennas list"
l 11.1 "Default credentials"
l 14 "Eurotech Everyware IoT"
l 16.1 "How to install the product using the Mounting Bracket"
17 February 2021
2-3 Updates section:
l 11.1 "Default credentials"
23 February 2021
2-4 Updates section:
l 7.4.8 “Labeling information”
l 7.5 Antenna list”
l 9.2 "Internal Cellular Modem"
l 12.5 "How to manage the Internal Cellular Modem"
l 12.15.2 "How to manage the Watchdog from the command line"
9 March 2021
© 2021 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
ReliaGATE 10-12 User manual Rev. 2-4 How to get started
HOW TO GET STARTED
To get started with the ReliaGATE 10-12, follow these steps:
1. Read carefully and understand the instructions and warnings contained in this manual.
To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the
instructions and warnings contained in this manual.
For more information see: "Safety instructions" on page11.
Whenever in doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support.
For more information see: "How to receive technical assistance" on page19
2. Know the ReliaGATE 10-12 and its interfaces.
For more information see:
l "Product overview" on page25
l "Technical specifications" on page27
l "Interfaces overview" on page41
l "Interfaces in detail" on page47
3. Understand how to login the Administration Console and how to manage the interfaces in
Linux.
For more information see:
l "How to login the Administration Console" on page69
l "How to manage interfaces in Linux" on page73
4. Install the ReliaGATE 10-12.
For more information see:
l "Mechanical specifications" on page99
l "How to install the product" on page101
5. Supply power to the ReliaGATE 10-12 respecting all safety instructions.
For more information see: "Power supply. How to turn ON/OFF and reset the product" on page107
6. Start developing your IoT applications.
The ReliaGATE 10-12 supports the Eurotech Everyware Software Framework (ESF). ESF is a
smart application container that enables remote management of IoT gateways and provides a wide
range of APIs allowing you to write and deploy your own IoT application.
For more information see:
l "Eurotech Everyware IoT" on page95
l http://esf.eurotech.com/docs.
3 / 120
(This page has been intentionally left blank)
ReliaGATE 10-12 User manual Rev. 2-4 Contents
CONTENTS
Trademarks 2
Intended audience of this document 2
Revision history 2
How to get started 3
Contents 5
1 Safety instructions 11
1.1 Warning messages 11
1.1.1 Warning messages for harm to persons 11
1.1.2 Warning messages for damage to property 12
1.2 Warning: power supply safety 12
1.3 Caution: wireless safety 12
1.4 Warning: battery safety 13
2 Consignes de securite 15
2.1 Messages d’avertissement 15
2.1.1 Messages d’avertissement relatifs au dommage aux personnes 15
2.1.2 Messages d’avertissement relatifs aux dommages matériels 16
2.2 Avertissement: sécurité de l’alimentation électrique 16
2.3 Attention: sécurité sur la connectivité sans fil 16
2.4 Avertissement: Sécurité de la Batterie 17
3 How to receive technical assistance 19
3.1 How to ask for technical support 19
3.2 How to send a product for repair 19
4 Comment obtenir une assistance technique 21
4.1 Comment contacter le support technique 21
4.2 Comment retourner un produit en service après vente 21
5 Conventions used 23
5.1 Conventions for signal names 23
5.2 Conventions for signal types 23
6 Product overview 25
6.1 Product description 25
6.2 Intended use and not allowed uses of the product 26
6.2.1 Intended use 26
6.2.2 Not allowed uses 26
6.3 Technical specifications 27
6.4 Optional accessories 29
6.5 Product labels 31
7 Regulatory information 33
7.1 CE compliance 33
7.1.1 CE marking 33
7.1.2 Safety 33
7.1.3 Packaging and packaging waste 33
7.1.4 Product disposal and recycling 33
7.1.5 WEEE compliance 33
7.1.6 RoHS 3 compliance 34
7.1.7 RED 2014/53/EU compliance 34
7.2 Statement for class A equipment (vers.: -61) 35
5 / 120
Contents ReliaGATE 10-12 User manual Rev. 2-4
7.3 Statement for KN 32/35 (vers.: -61) 35
7.4 FCC/ISEDcompliance 36
7.4.1 FCC marking 36
7.4.2 FCC compliance: Class B Digital Device 36
7.4.3 FCC restrictions on 5 GHz Wi-Fi usage 37
7.4.4 ISED Canada Regulatory Notices 38
7.4.5 ISED Class B Digital Device Notice 38
7.4.6 Responsible parties: Canadian Representative contact information 38
7.4.7 RF Radiation Exposure Statement 39
7.4.8 Labeling information 39
7.5 Antennas list 39
7.6 REACH compliance 40
8 Interfaces overview 41
8.1 Front Side Interfaces overview 41
8.2 Rear Side Interfaces overview 42
8.2.1 Service Panel Interfaces 43
8.3 Right Side Interface overview 44
8.4 Left Side Interface overview 45
8.5 LED Indicators overview 46
9 Interfaces in detail 47
9.1 Wi-Fi and Bluetooth (all vers. except: -61, -63, -64) 47
9.1.1 Wi-Fi specifications 47
9.1.2 Bluetooth specifications 48
9.1.3 BLE specifications 48
9.1.4 Antennas connectors specifications 48
9.2 Internal Cellular Modem (all vers. except: -61, -62) 49
9.2.1 Internal Cellular Modem specifications (according to product versions) 49
9.2.2 Main antenna requirements 49
9.2.3 Second antenna requirements (for antenna diversity) 50
9.2.4 LTE - single antenna operation notes 50
9.2.5 Cellular antennas - Installation guidelines 50
9.2.6 Antenna connectors specifications 50
9.2.7 The MicroSIM card receptacles 51
9.3 Internal GNSS (vers.: -65G, -66G, -67G) 53
9.3.1 Internal GNSS specifications 53
9.3.2 Antenna connector specifications 53
9.4 Digital I/Os 54
9.4.1 Insulated Digital Inputs 54
9.4.2 Insulated Digital Outputs 55
9.4.3 Digital I/Os connector specifications 55
9.5 COM 0 and COM 1 56
9.5.1 Note for termination resistors for COM 0 in RS-485 mode 56
9.5.2 Note for termination resistors for COM 1 in RS-485 mode 56
9.5.3 Note for fail-safe resistors for COM 0 in RS-485 mode 56
9.5.4 Note for fail-safe resistors for COM 1 in RS-485 mode 57
9.5.5 Note for RS-485 half duplex (only for COM 0 in RS-485 mode) 57
9.5.6 COM 0 and COM 1 connector specifications 58
9.6 CAN 0 and CAN 1 59
9.6.1 CAN 0 and CAN 1 connector specifications 59
9.7 ETH 0 and ETH 1 60
9.7.1 Ethernet specifications 60
9.7.2 ETH 0 and ETH 1 connectors specifications 60
9.8 USB 0, USB 1, USB 2 61
9.8.1 USB 0 and USB 1 connectors specifications 61
6 / 120
ReliaGATE 10-12 User manual Rev. 2-4 Contents
9.8.2 USB 2 connector specifications 61
9.9 Expansion connector 62
9.9.1 Expansion connector specifications 62
9.10 TTL Serial Console 63
9.10.1 TTL Serial Console connector specifications 63
9.11 MicroSD card receptacle 64
9.11.1 How to insert / remove the MicroSD card in the receptacle 64
9.12 RTC (Real Time Clock) 65
9.12.1 The RTC Device "/dev/rtc1" 65
9.12.2 The RTC backup battery 65
9.13 Watchdog 66
9.14 Accelerometer and Gyroscope 66
9.15 Programmable pushbutton 66
10 The Software 67
10.1 The Linux OS distribution 67
10.2 The bootloader procedure 67
10.3 How to create and use a bootable MicroSD card for a Linux release 67
10.4 Ensure power supply during installation and update 67
10.5 Partition layout 68
10.6 The TPM 68
11 How to login the Administration Console 69
11.1 Default credentials 69
11.2 How to login using the Serial Console 69
11.3 How to login via Secure Shell (SSH) 70
11.3.1 How to login via eth0 70
11.3.2 How to login via eth1 70
11.4 How to change the password 71
12 How to manage interfaces in Linux 73
12.1 How to drive the GPIOs: the GPIO Utility 73
12.2 How to determine the version of Linux installed 74
12.3 How the storage memory is exposed 74
12.4 How to manage Wi-Fi and Bluetooth 74
12.5 How to manage the Internal Cellular Modem 75
12.5.1 How to select the MicroSIM card receptacle to use 75
12.5.2 Note for LE910C1-NF Modem: AT&T / Verizon firmware support 75
12.5.3 How to disable/enable the diversity (CELL DIV) function 76
12.6 How to manage the Internal GNSS 77
12.7 How to manage the CAN ports 78
12.7.1 How to enable the CAN Bus 5V 78
12.7.2 How to setup a CAN port 78
12.7.3 How to send/receive a message via a CAN port 78
12.8 How the TTL Serial Console is exposed 78
12.9 How to manage the COM ports 79
12.9.1 How to set the termination resistors for COM 0 in RS-485 mode 79
12.9.2 How to set the RS-422/485 modes for COM 0 79
12.9.3 How to set the RS-232/485 modes for COM 1 83
12.9.4 How to test a serial port 86
12.10 How to manage the Digital I/Os 87
12.11 How to manage the LED Indicators 87
12.12 How the Ethernet ports are exposed 87
12.13 How to enable the 3.3V and 5V power supply on the Expansion connector 88
12.14 How the RTC is exposed 89
12.15 How the Watchdog is exposed 90
7 / 120
Contents ReliaGATE 10-12 User manual Rev. 2-4
12.15.1 How to manage the Watchdog using the C programming language 90
12.15.2 How to manage the Watchdog from the command line 90
12.15.3 For more information 90
12.16 How to output Accelerometer and Gyroscope values 91
12.17 How to read the Internal Temperature Sensor 92
12.18 How to know the programmable pushbutton status 92
12.19 The TPM and the tpm2-tools package 92
12.20 Optional: How to manage the ReliaCELL power supply 92
13 How to compile custom software 93
13.1 How to setup the toolchain 93
13.2 How to use the toolchain to compile custom software 93
14 Eurotech Everyware IoT 95
14.1 Everyware Software Framework (ESF) 95
14.2 The ESF Web UI 95
14.3 The ESF Wires application 96
14.4 Everyware Cloud (EC) 97
14.5 For more information 97
15 Mechanical specifications 99
15.1 Product mechanical dimensions 99
15.2 Mounting bracket mechanical dimensions 100
16 How to install the product 101
16.1 How to install the product using the Mounting Bracket 101
16.2 How to replace the Mounting Bracket with the DIN Rail Mounting Clip or vice versa 103
16.2.1 How to replace the Mounting Bracket with the DIN Rail Mounting Clip 103
16.2.2 How to replace the DIN Rail Mounting Clip with the Mounting Bracket 104
16.2.3 Which screws are used with the Mounting Bracket or with the DIN Rail Mounting Clip 105
16.3 How to install/ remove the product on/ from a DIN Rail 106
16.3.1 How to install the product on a DIN Rail 106
16.3.2 How to remove the product from a DIN Rail 106
17 Power supply. How to turn ON/OFF and reset the product 107
17.1 Power supply specifications 107
17.2 Power IN connector specifications 107
17.3 How to supply power and turn ON the product 108
17.4 How to turn OFF the product 109
17.5 How to reduce the power consumption of the product 109
17.6 How to hardware reset the product 109
18 How to maintain the product 111
18.1 How to safely remove the power supply 111
18.2 How to verify the installation of the product 111
18.3 How to clean the product 111
Appendix 1: Advanced boot options 113
1.1 Advanced boot options availability 113
1.1.1 How to configure a boot option 113
1.1.2 How to gain access to the Bootloader CLI 113
1.1.3 How to change the default boot option 114
1.2 The production fitImage 114
1.2.1 How to define the variants 114
1.2.2 How to manually configure the system to boot from a different DTB within the current fitImage 114
Appendix 2: Expansion connector pin map with respect to device tree pin assignment 117
8 / 120
ReliaGATE 10-12 User manual Rev. 2-4 Contents
Notes 119
9 / 120
(This page has been intentionally left blank)
ReliaGATE 10-12 User manual Rev. 2-4 1 Safety instructions
1 SAFETY INSTRUCTIONS
IMPORTANT: Read carefully and understand the instructions and warnings contained in this
document before installing / using the product. Keep this document for future reference.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions
and warnings contained in this document.
Failure to comply with the instructions and warnings contained in this document, violates the standards of
safety, design, manufacture, and intended use of the product.
Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings
contained in this document.
Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see "How to receive technical assistance" on page19).
1.1 Warning messages
1.1.1 Warning messages for harm to persons
To indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury,
the following message is used:
DANGER
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
To indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury,
the following message is used:
WARNING
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
To indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury,
the following message is used:
CAUTION
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
11 / 120
1 Safety instructions ReliaGATE 10-12 User manual Rev. 2-4
1.1.2 Warning messages for damage to property
To indicate potential risks of damage to the supported product (or to other property), the following message
is used:
NOTICE
Sign
(if necessary)
Text that explains how to avoid damaging the supported product (or other
property)
1.2 Warning: power supply safety
NOTICE
The product is intended to be supplied by an external LPS power source, ES1/PS2.
WARNING
ELECTRIC SHOCK HAZARD
Failure to supply power correctly or to follow all operating instructions correctly, may create an
electric shock hazard, which could result in personal injury or loss of life, and / or damage the
equipment or other property.
To avoid injuries and safely supply power to the product, complete the following steps:
1. Observe all the instructions for safety, installation, and operation
2. Make sure your hands are dry
3. Make sure that all the cables to use:
a. Are in good condition
b. Meet the product requirements and comply with the relevant standards and
regulations
4. Position cables with care. Do not position cables in places where they may be trampled
or compressed
5. Make sure that the power-points and plugs are in good condition before using them
6. Do not overload the power-points and plugs
7. Make sure that the product maintains a proper grounding connection
8. Use a power supply that meets the product requirements and complies with the relevant
standards and regulations. In case of uncertainties, contact the Eurotech Technical
Support (for more information see "How to receive technical assistance" on page19)
9. Connect power after the installation of the system has been completed
10. Never connect or disconnect the cables with the system or the external apparatus
switched ON.
1.3 Caution: wireless safety
CAUTION
The antennas used with the product must be installed with care, avoiding any interference with
other electronic devices and keeping a distance from persons greater than 20 cm. If these
requirements cannot be satisfied, the system integrator has to assess the final product with
respect to SAR regulations.
12 / 120
ReliaGATE 10-12 User manual Rev. 2-4 1 Safety instructions
1.4 Warning: battery safety
WARNING
SERIOUS HARM IF BATTERY IS USED INCORRECTLY
Before using the battery always refer to battery manufacturer's instructions for safety.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
Use and replace only with correct size and type.
Dispose of used batteries according to battery manufacturer's instructions.
13 / 120
(This page has been intentionally left blank)
ReliaGATE 10-12 User manual Rev. 2-4 2 Consignes de securite
2 CONSIGNES DE SECURITE
IMPORTANT: Lire attentivement et bien respecter les instructions et les avertissements contenus
dans ce document avant d'installer / d'utiliser le produit. Conserver ce document pour s'y férer
à l'avenir.
Pour éviter les risques de blessures, de choc électrique, d'incendie ou de térioration du matériel, bien
suivre les instructions et les avertissements contenus dans ce document.
Le non-respect des instructions et des avertissements contenus dans ce document constitue une violation
des normes de sécurité, de conception, de fabrication et d'utilisation prévue du produit.
Eurotech rejette toute responsabilité pour les dommages causés en cas de non-respect des instructions et
des avertissements contenus dans ce document.
En cas de doute sur la comphension de ce document, contacter le Support Technique d Eurotech (pour
plus d’informations voir "Comment obtenir une assistance technique" page 21).
2.1 Messages d’avertissement
2.1.1 Messages davertissement relatifs au dommage aux personnes
Pour signaler une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou un
préjudice grave le message suivant est utilisé:
DANGER
Signal
(si besoin)
TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.
Texte expliquant comment éviter ce danger.
Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner la
mort ou un pjudice grave le message suivant est utilisé:
AVERTISSEMENT
Signal
(si besoin)
TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.
Texte expliquant comment éviter ce danger.
Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner un
préjudice mineur ou mo le message suivant est utilisé:
ATTENTION
Signal
(si besoin)
TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.
Texte expliquant comment éviter ce danger.
15 / 120
2 Consignes de securite ReliaGATE 10-12 User manual Rev. 2-4
2.1.2 Messages davertissement relatifs aux dommages matériels
Pour signaler les risques potentiels de détérioration du produit (ou des produits annexes), le message
suivant est utilisé:
AVIS
Signal
(si besoin)
Texte expliquant comment éviter d'endommager le produit (ou des produits
annexes)
2.2 Avertissement: sécurité de l’alimentation électrique
AVIS
Le produit doit être alimenté par une source d'énergie externe LPS, ES1/PS2.
AVERTISSEMENT
RISQUE DE CHOC ÉLECTRIQUE
Une alimentation électrique incorrecte peut créer un risque de choc électrique, pouvant
entraîner des blessures corporelles ou la perte de vies humaines, et / ou endommager le
produit ou d'autres biens.
Pour éviter les blessures et brancher l'appareil en toute sécurité, procéder comme suit:
1. Respecter toutes les consignes de curité, d'installation et d'utilisation
2. S'assurer que les mains sont sèches
3. S'assurer que tous les câbles utilisés:
a. Sont en bon état
b. Répondent aux exigences du produit et soient conformes aux normes et
glementations en vigueur
4. Positionner les câbles avec soin. Ne pas les placer dans des endroits ils risquent
d'être piétis ou comprimés
5. S’assurer que les prises de courant et les connecteurs d’alimentation sont en bon état
avant de les utiliser
6. Ne pas surcharger les prises de courant et les connecteurs d’alimentation
7. S'assurer que le produit est correctement relié à la terre
8. Utiliser une alimentation électrique conforme aux exigences du produit et conforme aux
normes et réglementations en vigueur. En cas d'incertitude, contacter lquipe
d'assistance technique d'Eurotech (pour plus d'informations, voir "Comment obtenir une
assistance technique" page 21)
9. Ne Brancher l'alimentation électrique qu’une fois l'installation du système termie
10. Ne jamais brancher ou brancher les bles lorsque le système ou un appareil
riphérique sous tension.
2.3 Attention: sécurité sur la connectivité sans fil
ATTENTION
Les antennes utilies avec le produit doivent être installées avec soin, en évitant toute
interférence avec d'autres appareils électroniques et à au moins 20 cm des personnes. Si ces
exigences ne peuvent être satisfaites, l'intégrateur du sysme doit évaluer le produit final par
rapport à la glementation SAR.
16 / 120
ReliaGATE 10-12 User manual Rev. 2-4 2 Consignes de securite
2.4 Avertissement: Sécurité de la Batterie
AVERTISSEMENT
BLESSURES GRAVES SI LA BATTERIE EST UTILISÉE DE MANRE INCORRECTE
Avant d’utiliser la batterie, reportez-vous toujours aux instructions du fabricant de la batterie
pour plus de sécurité.
ATTENTION
RISQUE DEXPLOSION SI LA BATTERIE DE REMPLACEMENT NE RESPECTE PAS LES
CARACTÉRISTIQUES DE LA BATTERIE INITIALE.
N'utilisez que des batteries de dimensions et de caractéristiques préconisées.
Respectez les instructions du constructeur pour le recyclage de la batterie usagée.
17 / 120
(This page has been intentionally left blank)
ReliaGATE 10-12 User manual Rev. 2-4 3 How to receive technical assistance
3 HOW TO RECEIVE TECHNICAL ASSISTANCE
3.1 How to ask for technical support
To ask for technical support, complete the following steps
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit a support request
3. Wait for the reply from the Eurotech Technical Support with the information you required
3.2 How to send a product for repair
Any product returned to Eurotech, that is found to be damaged due to inadequate packaging, will
not be covered by the warranty.
To send a product for repair, complete the following steps:
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit an RMA request
3. Wait for the reply from the RMA Department. It will contain:
l The RMA number
l The shipping information
4. Pack the product adequately using anti-static material and place it in a sturdy box with enough
packing material to protect it from shocks and vibrations
5. Ship the product to Eurotech following the information received from the RMA Department.
19 / 120
(This page has been intentionally left blank)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

Eurotech ReliaGATE 10-12 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues