Accton Technology RPU150W Quick Installation Manual
- Taper
- Quick Installation Manual
Redundant Power Unit
Quick Installation Guide
Copyright
Copyright © 1999 by Accton Technology Corporation. All rights reserved.
No part of this document may be copied or reproduced in any form or by any means
without the prior written consent of Accton Technology Corporation.
Accton makes no warranties with respect to this documentation and disclaims any implied
warranties of merchantability, quality, or fitness for any particular purpose. The
information in this document is subject to change without notice. Accton reserves the
right to make revisions to this publication without obligation to notify any person or entity
of any such changes.
Trademarks
Accton is a registered trademark of Accton Technology Corporation. Other trademarks or
brand names mentioned herein are trademarks or registered trademarks of their
respective companies.
International Headquarters USA Headquarters
No. 1 Creation Road III, 6 Hughes
Science-based Industrial Park Irvine, CA 92618
Hsinchu 300, Taiwan, R.O.C. Phone Numbers -
Phone: 886-3-5770-270 Sales: 800-926-9288
FAX: 886-3-5770-267 Support: 888-398-4101 or
949-707-4847
FAX: 949-707-2460
Limited Warranty
Accton warrants to the original owner that the product delivered in this package will be free
from defects in material and workmanship for a period of one year. For the warranty to apply,
you must register your purchase by returning the registration card indicating the date of
purchase and including proof of purchase. The warranty does not cover the product if it is
damaged in the process of being installed.
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY
ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. ACCTON SHALL NOT
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCTON NEITHER
ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY OTHER LIABILITY.
Customer Remedies: If the product is found to be defective within the first year from the later
of date of purchase or date of manufacture, Accton's entire liability and your exclusive remedy
for any breach of warranty, shall be, at its option, to repair or replace the product at no charge
except as set forth below. If the product is found to be defective after one year from the later of
date of purchase or date of manufacture, Accton will charge a process and handling fee,
provided that you deliver the product along with a return material authorization (RMA) number
either to the company from whom you purchased it or to Accton. Accton warrants the repaired
or replaced product to be free from defects in material and workmanship for the remainder of
the original product's warranty period.
Return Process: Before you may return any Accton product to Accton, you must request an
RMA number by calling, faxing or writing Accton's Service Department at the address listed
below. If you ship the product, you must assume the risk of damage or loss in transit. You
must use the original container (or the equivalent) and pay the shipping charge. Accton may
replace or repair the product with either a new or reconditioned product, and the returned
product becomes Accton's property. At Accton's sole discretion, Accton will issue a credit for
either a comparable replacement Accton product or credit the original purchase price towards
the purchase of any Accton product for any unrepairable, defective product.
This warranty does not cover replacement of products damaged by abuse, accident, misuse,
neglect, alteration, repair, disaster, improper installation or improper testing.
ACCTON SHALL NOT BE HELD LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE,
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES CAUSED BY THE USE OF THIS
PRODUCT OR INABILITY TO USE IT, EVEN IF THE COMPANY OR ACCTON HAS BEEN
ADVISED OF SUCH LIABILITY OR OTHER SPECIAL CLAIMS.
If you purchased this product in the USA, be aware that some states do not allow limitations on
how long an implied warranty lasts, so the above limitations may not apply to you. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights and you may have other rights which vary from state to state. All parts or components
contained in this product are covered by Accton's Limited One Year Warranty for this product.
The product may contain fully tested, recycled parts, warranted as if new.
For warranty information:
All territories except North and South America:
Accton Technology Corporation, International Headquarters
No. 1, Creation Rd. III, Science-based Industrial Park,
Hsinchu 300, Taiwan, R.O.C.
Phone: 886-3-5770-270
Fax: 886-3-5770-267
North and South America:
Accton Technology Corporation, USA Headquarters
6 Hughes, Irvine, CA 92618, U.S.A.
Phone: 888-398-4101 or 949-707-4847
Fax: 949-707-2460
Technical Support
Your dealer or installer is the person who understands your network and Accton units. If neither is
available to help you, Accton technical support engineers are available by fax, mail or phone.
• Send your technical questions by fax to:
International Headquarters: 886-3-5770-267
USA Headquarters: 949-707-4828
• Send your technical questions by email to:
• Mail your technical questions to:
International Headquarters USA Headquarters
Accton Technology Corporation Accton Technology Corporation
Attn: Technical Support Attn: Technical Support
No. 1 Creation Road III 6 Hughes
Science-based Industrial Park Irvine, CA 92618
Hsinchu 300, Taiwan, R.O.C.
• During local business hours, call:
International Headquarters USA Headquarters
Monday to Friday, 8 am to 6 pm Monday to Friday, 7 am to 5 pm Pacific Time
886-3-5770-270 888-389-4101 or 949-707-4847
RPU150W
E1199-R01
150107-102
About the Redundant Power Unit (RPU)
Accton’s Redundant Power Unit can supply 150 Watts of backup power to a single Accton
device (hub or switch) in the event of an AC loss or failure of an internal power supply.
Please check with Accton for information on the devices supported by this RPU.
Features and Benefits
• Supports one Accton device
• AC line cord can draw power from a different supply circuit
• DC line cord provides backup power to the attached device
Front and Rear Panels
A Power indicator is located on the RPU’s front panel. While the AC supply and DC
backup receptacles are located on the RPU’s rear panel.
Redundant Power Unit
RPU150W
Power
DC OUTPUT
3.3V
5V
12V
30A
9A
0.7A
100-240V~ 50-60Hz 3A
Installing the RPU
The RPU may be placed on a desktop or mounted in a rack.
Warning: DO NOT place the RPU on the floor as the case is not waterproof.
RPU Packing List
• Redundant Power Unit — provides backup power to one Accton device
• One AC Supply Power Cord — US, Continental Europe or UK
• One DC Backup Power Cord — with D-sub connectors on both ends
• One DC Backup Power Cord — with D-sub and plastic connectors
• Rack Mounting Kit — brackets and screws
• Star-head screwdriver
• This Quick Installation Guide
• Warranty Registration Card — be sure to complete and return to Accton
Desktop or Rack Mounting
You can set the RPU on a desktop or flat surface near a separate AC power source and
close to the device to which it is to supply power. To mount the RPU in a standard EIA
19-inch rack, use the brackets and screws supplied with the RPU. Use a cross-head
screwdriver to attach the brackets to the side of the switch. Position the RPU in the rack
by lining up the holes in the brackets with the appropriate holes on the rack. And then use
the supplied screws to mount the RPU in the rack. (Leave about two inches of space on
the sides of the RPU to ensure adequate ventilation.)
Making Connections
Caution: DO NOT connect the RPU to an AC power source until the DC power cord has been
connected to the other device (hub or switch).
1. Connect one end of the AC cord to the AC receptacle on the supported device
(hub or switch), and the other end to a grounded power outlet.
2.. Use the provided star-head screwdriver to loosen the screws on the D-sub
receptacle faceplates and remove the faceplates from both the RPU and the
supported device (hub or switch).
3. Connect one end of the DC cord to the redundant power receptacle on the other
device (hub or switch), and the other end to the IEC receptacle on the RPU.
4. Connect one end of the AC cord to the AC receptacle on the RPU, and the other end
to a grounded power outlet. The Power LED on the RPU should light up.
SNMP/RMON Module
RS232
EM3570-Agent
DC OUTPUT
3.3V
5V
12V
30A
9A
0.7A
100-240V~ 50-60Hz 3A
Hub or Switch
RPU
Circuit A
Circuit B
(1)
(1)
(3)
(3)
(4)
(4)
Specifications
Model Number
RPU150W
Receptacle
IEC Socket 3P
Size
22.28 x 9.1 x 4.5 cm. (8.77 x 3.58 x 1.77 in.)
Weight
3.86 lb. (1.75 kg)
Temperature
Operating 0° to 40°C (32° to 104°F)
Storage -40° to +85°C (-40° to 185°F)
Relative Humidity
20% to 90%
Cooling
2 fans
AC Input Power
100 to 240 VAC, 50 to 60 Hz,3.0A
DC Output Power
+ 3.3 VDC @ 30 A max.,
+ 5 VDC @ 9 A max.,
+ 12 VDC @ 0.7 A max.
DC Power Cable Connector
22-pin
Overload Protection
Reduces output to safe levels when output exceeds 120%
MTBF
50,000 hours minimum
EMI/EMC Compliances
FCC Class A, EN55022 (CISPR 22) Class A, VCCI Class A,
AS/NZ 3548:1995 Class A, CE Mark
Safety Compliances
UL 1950, CSA 22.2 No.950,234, EN60950, IEC 60950
Warranty
One year
Compliances
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual may cause harmful interference to radio communications.
Its operation in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Canadian Department of Communications - Class A
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”,
ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe A prescrites dans la norme sur le matérial brouilleur: “Appareils
Numériques”, NMB-003 édictée par le ministère des Communications.
VCCI Class A Compliance (Japan)
CE Mark Declaration of Conformance (Europe)
This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to
the following specifications:
EMC: EN55022(1988)/CISPR-22(1985) class A
IEC1000-4-2(1995) 4kV CD, 8kV AD
IEC1000-4-3(1995) 3V/m
IEC1000-4-4(1995) 1kV - (power line), 0.5kV - (signal line)
IEC 1000-4-6(1995) 3Vrms
This product complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC.
-
1
-
2
Accton Technology RPU150W Quick Installation Manual
- Taper
- Quick Installation Manual
dans d''autres langues
- English: Accton Technology RPU150W
