Maytag MHWE500VP - Performance Series Front Load Washer Mode d'emploi

Marque: Maytag

Modèle: MHWE500VP - Performance Series Front Load Washer

Catégorie: Machines à laver

Taper: Mode d'emploi

PERFORMANCE SERIES

FRONT-LOADING AUTOMATIC WASHER

USE & CARE GUIDE

LAVEUSEAUTOMATIQUE A CHARGEMENT FRONTAL

GUIDE D'UTILISATION ET D'ENTRETIEN

FOR QUESTIONS ABOUT FEi_IURES, OPERATION/PERFORMANCE, PARTS, ACCESSORIES OR SERVICE

CAll: 1.800.688.9900

IN CANADA, CAll: 1.800.807.6777

VISIT OUR WEBSITE AT WWW.MAYTAG.COM

IN CANADA, WWW.MAYTAG.CA

AU CANADA, POUR DES QUESTIONS APROPOS DES CARACTERISTIQUES, DU FONCTIONNEMENT/

RENDEMEN I, DES PIECES, DES ACCESSOIRES OU DU SERVICE, COMPOSEZ IE : 1.800.807.6777

OU VISITEZ NOTRE SITE INTERNET

WWW. MAYTAG. CA

Certified to Sanitize

Certifid pour aseptiser

Designed to use only HE High Efficiency detergent

Con_:u pour I'utilisation d'un d6tergent haute efficacitd seulement

W10176966C

,i_!_ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i_i_i_ii!i¸i!i!i!i!i!i!i!i_i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_i_iiiiYiiiiii//li¸il¸iiii_ii,i_ii,i_ii,i_ii,i_ii,i_i_iii_i_ii_il'ii_i_iil'ii_i_iil_i_ii_i_ii_i_ii_ii_i_ii_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:_i_::¸_iii!ii,l,ii_,,¸¸¸¸_!_iiiiiiiii_i_¸il¸ii_ii_ii¸I¸I¸il¸ii_ii¸ii_ii¸ii_ii¸ii_iil¸ii_i_iil¸I¸iiiii_iiiii_i_i_ii_i_iiiii_ii_iii_ii_iii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!_!!

TABLE OF CONTENTS

WASHER SAFETY ...................................................................................................................... 3

INSTALLATION REQUIREMENTS ............................................................................................. 4

Tools and Parts ..................................................................................................................... 4

Options ................................................................................................................................ 5

I.ocation Requirements ......................................................................................................... 6

Drain System ........................................................................................................................ 8

Electrical Requirements ........................................................................................................ 8

INSTALLATION INSTRUCTIONS ............................................................................................. 9

Remove Transport System .................................................................................................... 9

Connect the Inlet Hoses ..................................................................................................... 10

Route the Drain Hose ......................................................................................................... 10

Secure the Drain Hose ....................................................................................................... 11

I_eve[ the Washer ................................................................................................................ 11

Complete Installation ......................................................................................................... 11

FEATURES AND BENEFITS ...................................................................................................... 12

WASHER USE .......................................................................................................................... 13

Starting Your Washer .......................................................................................................... 13

Using the Proper Detergent ................................................................................................ 13

Using the Dispenser ........................................................................................................... 14

Pausing or Restarting ......................................................................................................... 15

Changing Cycles, Options, and Modifiers .......................................................................... 16

Status Indicator ................................................................................................................... 16

Cycles ................................................................................................................................. 17

Options .............................................................................................................................. 18

Modifiers ............................................................................................................................ 19

LAUNDRY GUIDE .................................................................................................................. 20

LAUNDRY TIPS ....................................................................................................................... 20

I.oading .............................................................................................................................. 21

WASHER CARE ........................................................................................................................ 21

Cleaning Your Washer ....................................................................................................... 21

Water Inlet Hoses ............................................................................................................... 22

Vacation, Storage, and Moving Care .................................................................................. 22

TROUBLESHOOTING ............................................................................................................. 23

ASSISTANCE OR SERVICE ....................................................................................................... 26

In the U.S.A ........................................................................................................................ 26

In Canada ........................................................................................................................... 26

WARRANTY ............................................................................................................................ 27

ii!!i!ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!iiii!il¸!I¸_!_!_!_!_!_!iiiiii__ii_i__ii_i__ii_i__ii_i__ii_i__ii_i__ii_i__ii_iiiiiYiiiiiiI__¸i¸il¸iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiliiilii_ii¸ii_ii_i_iiiii_i_i_iiiiii:ii:i:ii:ii:i:ii:ii:i:ii:ii:i:ii:ii:i:ii:ii:i:ii:i:i:ill_iJiiiiiiiiiiiiiii__!!!i!iiii_!iii_!iii_!iii_!iii_!ii_i_!ii_i_!ii_i_!ii_i_!ii_i_!ii_i_!iii_!iiiiiiiiI_ii_iiii_ii_iii_i_ii_iii_iii_iii_iii_iiii_iiii_ii_ii_i_iii_ii_iiii_i_i_iii_i_ii_i_:ii_ii_i_:ii_ii_i_:ii_ii_i_:ii_ii_i:_iiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

TABLE DES MATIERES

SI_CURITI_ DE LA LAVEUSE ..................................................................................................... 28

EXIGENCES DqNSTALLATION ............................................................................................... 30

Outillage et pi_ces .............................................................................................................. 30

Options .............................................................................................................................. 30

Exigences d'emplacement .................................................................................................. 31

Syst_me de vidange ............................................................................................................ 33

Sp6cifications 6[ectriques ................................................................................................... 33

INSTRUCTIONS DqNSTALLATION ....................................................................................... 34

Elimination des accessoires de transport ............................................................................. 34

Raccordement des tuyaux d'a[imentation ........................................................................... 35

Acheminement du tuyau de vidange .................................................................................. 35

Immobilisation du tuyau de vidange .................................................................................. 36

R6g[age de ['aplomb de [a [aveuse ..................................................................................... 36

Achever ['installation .......................................................................................................... 36

CARACTI_RISTIQUES ET AVANTAGES ................................................................................... 37

UTILISATION DE LA LAVEUSE ............................................................................................... 38

Mise en marche de Ha[aveuse ............................................................................................ 38

Utilisation du d6tergent appropri6 ...................................................................................... 39

Uti[isation du distributeur ................................................................................................... 39

Pause ou remise en marche ................................................................................................ 41

Changement des programmes, options et modificateurs ..................................................... 41

T6moins [umineux .............................................................................................................. 41

Programmes ....................................................................................................................... 42

Options .............................................................................................................................. 44

Modificateurs ..................................................................................................................... 44

Guide de [essivage ............................................................................................................. 46

CONSEILS DE LESSIVAGE ....................................................................................................... 47

Chargement ........................................................................................................................ 47

ENTRETIEN DE LA LAVEUSE ................................................................................................... 48

Nettoyage de Ha[aveuse ..................................................................................................... 48

Tuyaux d'arriv6e d'eau ....................................................................................................... 49

Pr6cautions _ prendre avant [es vacances, un entreposage ou un d6m6nagement ............. 49

DI_PANNAGE .......................................................................................................................... 50

ASSISTANCE OU SERVICE ...................................................................................................... 54

Aux Etats-Unis .................................................................................................................... 54

Au Canada ......................................................................................................................... 54

GARANTIE ............................................................................................................................... 55

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

2,',',i'i

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

includingthe following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. if the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[] Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

[] Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESEINSTRUCTIONS

State of California Proposition 65 Warnings:

WARNING: This product contains a chemical known to the State of California to cause cancer.

WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

: ........................................................................................

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the

washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 1'_/1_,"[39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrenches 17 mm and 13 mm

• I.eve[

• Wood block

• Ruler or measuring tape

Parts supplied:

Pedestal

A pedestal will add to the total height of the washer for a total height of 53.5" (1359 mm).

D E

A.Drain hose form

B.Inlet hose (2)

C.Inlet hose washers (4)

D. 7iansport boh hole plug (4)

E.Beaded strap

Alternate Parts

Your installation rnay require additional parts. If you are interested in purchasing one of the

items listed here, ca[[ the toll-free number on the cover or in the "Assistance or Service"

section.

If You Have You Will Need to Buy

Laundry tub or standpipe Surnp purnp systern (if not already available)

taller than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 I.), 30" (762 mm) tall drain tub or

utility sink and sump pump (available from local plumbing

suppliers)

Floor drain Siphon break, Part Number 285834; additional drain hose

Part Number 8318155; and connector kit,

Part Number 285835

Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863

Water faucets beyond reach 2 longer water fill hoses:

of fill hoses 6 ft (1.8 m) Part Number 76314,

10 ff (3.0 m) Part Number 350008

Optional pedestal

This pedestal is available in several colors. ''

To orde,; call the dealer frorn whorn you purchased you, washer or refer to the "Assistance

or Service" section.

Pedestal Height Color Part Number

10" (254 mm) White MHP1000SQ

10" (254 mm) Black MHP1000SB

15.5" (394 mm) White XHP1550VW

15.5" (394 mm) Black XHP1550VB

15.5" (394 mm) Slate XHP1550VE

15.5" (394 mm) Crimson Red XHP1550VF

15.5" (394 mm) Oxide XHP1550VJ

15.5" (394 mm) Evergreen XHP1550VP

Stack Kit

:Z'I

Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase

a Stack Kit.

To order; call the dealer from whom you purchased your dryer or refer to the "Assistance or

Service" section. Ask for Part Number 8212640.

Selectingtheproperlocationforyourwasherimprovesperformanceandminimizesnoiseand

possiblewasher"walk."

Yourwashercanbeinstalledunderacustomcounter,orinabasement,laundryroom,closet,

orrecessedarea.See"[)rainSystem."

Companionappliancelocationrequirementsshouldalsobeconsidered.Properinstallationis

yourresponsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the washer.

Washer Dimensions

5i"

{I295 ram}

• A grounded electrical outlet located within 6 ft (1.8 m) of where the power cord is

attached to the back of the washer. See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves,

and water pressure of 20-100 psi (137.9-689.6 kPa).

• A level floor with a maximum slope of 1" (250 mm) under entire washer. Installing the

washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not

recommended.

• A sturdy and solid floor to support the washer with a total weight (water and load) of

400 [bs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C). Some water can remain in the

washer and can cause damage in low temperatures.

Installation clearances

• The location must be large enough to allow the washer door to be fully opened.

• Additional spacing should be considered for ease of installation and servicing.

• Additional clearances might be required for wall, doob and floor moldings.

• Additional spacing of 1" (25 mm) on all sides of the washer is recommended to reduce

noise transfer.

Recommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

39" rain.

(990 ram)

• Companion appliance spacing should also be considered.

1"-_1._-;,_ 27'--_1<- 1"

(25 ram) (686 ram) (25 ram)

Recommended installation spacing for recessed or closet installation,

with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

34" ' 48 in.2.

-- (864ram) (310cm2)

24 in.2 *

(155cm2)'

11"_ 31Y2"-_[4"1_--

(25rnrn)(800rnrn)(102ram)

A B

A. Side view - closet or confined area

B.Closet door with vents

Recessed or closet installation - Washer on pedestal

--_ 3"

(76ram)

-i

--_ 3"

(76ram)

Recommended installation spacing for recessed or closet installation,

with stacked washer and dryer

The dimensions shown are for the recommended spacing.

I 18"rnin._

(457rnrn)

ll"_ 31,/_"_1 4"

(25mm)(a00ram)(102ram)

48 in.2 *

(310 cm 2)

24 in, 2*

(155cm2)

3"*(76ram)

3"*{76mm)

i_,,iii,_'/',_,,,_,,_,_",_,_,i_,

_1"* (25mm)

*Required spacing

\v/

76" "_

(1930mm)

1"_ _ 27"-_

{25mm) {686mm)

1" _._ 27"_.- 1" 5v2"**-_,,. _-- _ 1"

(25mm) ' (686mm) ' (25mm) (140mm) (25 mm)

A * Required spacing

A. Recessed area ** For venting out the side, 1" (25 mm) spacing is allowed.

B. Side view - closet or confined area

Z'I

Recommended installation spacing for cabinet installation

• The dimensions shown are for the recommended spacing.

• For cabinet installation, with a doo_, the minimum ventilation openings in the top are

required.

7"(178rnrn) 7"(176rnrn}

4" 311/2'' 1" 1" 27" 1"

(102turn} (800rnrn}(25rnrn}(25rnrn}(686rnrn} (25rnrn}

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub

drain system, or the floor drain system. Select the drain hose installation method you need.

See "Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" 150 rnrn). The minimum

carry-away capacity can be no less than 17 gal. (64 I_)per minute.

The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2.4 m)

from the bottom of the washer.

39"rnin.

(762ira)

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 I.) capacity. The top of the laundry tub must

be at least 30" (762 mm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See "Tools

and Parts."

The siphon break must be a minimum of 28" (711 mm) from the bottom of the washer.

Additional hoses might be needed.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. Time-

delay fuse or circuit breaker is recommended. It is recommended that a separate circuit

serving only this appliance be provided.

• This washer is equipped with a power supply cord having a 3 prong grounding plug.

• To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,

grounding-type outlet, grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility and obligation of the

customer to have the properly grounded outlet installed by a qualified electrician.

• If codes permit and a separate ground wire is used, it is recommended that a qualified

electrician determine that the ground path is adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not sure the washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING iNSTRUCTiONS

For a grounded, cord=connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged intoan appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if itwill

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately

3 ff (900 mm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during

transportation. These bolts also retain the power cord inside the washer until the bolts are

removed.

1. Using a 13 mm wrench, loosen each of the bolts.

2. Once the bolt is loose, move it to the center of the hole and completely pull out the bolt,

including the plastic spacer covering the bolt.

....6.

HHZ'

3. Once all 4 bolts are removed, discard bolt and spacers. Then pull the power cord through

the opening of the rear pane[ and dose the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, ca[[ your local service center. To avoid

suspension and structural damage to your washer, it must be properly set up for relocation by

a certified technician.

5°

Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers

in the couplings.

A B

A. Coupling

B. Washer

Make sure the washer drum is empty.

Attach the hose with the red color indicator to the Hot (left) inlet valve. Attaching the red

coupling first makes it easier to tighten connection with pliers. Screw on coupling by

hand until it is seated on the washer.

Attach the hose with the blue color indicator to the Cold (right) water inlet valve. Screw

on coupling by hand until it is seated on the washer.

J f-_

H. Hot water inlet

C. Cold water inlet

Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach hot water hose to the hot water faucet. Screw on coupling by hand until it is seated

on the washer.

Attach cold water hose to the cold water faucet. Screw on coupling by hand until it is

seated on the washer.

Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

9. Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure.

Record hose installation or replacement dates on the hoses for future reference.

10. Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Proper routing of the drain hose protects your floors from damage due to water leakage.

Read and follow these instructions.

Remove drain hose from washer cabinet

Gently pull the corrugated drain hose from the shipping clips.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A B

A. _1naf9either..... end of the drain hose formto the drain hose at the

point where the corrugation begins.

B.Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess drain hose into standpipe.

Hose should be secure, but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and Parts."

I 0

Drape the power cord over the washer top.

Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided.

(See illustrations A and B.)

A B C

If the washer faucets and the drain standpipe are recessed (see illustration C), put the

hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

I)o not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and vibration.

1. Check the levelness of the washer by placing a level on the top edge of the washei; first

side to side, then front to back.

If the washer is against a wall, move the washer out slightly before tipping back. If the

washer is not [eve[, first prop the front with a wood block and adjust the feet as necessary;

then prop the back and adjust feet as necessary. Repeat this step until washer is [eve[.

Make sure all four feet are stable and resting on the floor. Then check that the appliance is

perfectly [eve[ (use a [eve[).

After the washer is [eve[, use a 17 mm open-end wrench to turn the nuts on the feet tightly

against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are not tight against the washer

cabinet, the washer may vibrate.

The washer should not move front to back, side to side, or diagonally when pushed on its

top edges.

Slide the washer to its final location.

Confirm the levelness of the washer.

1. Check the electrical requirements. Be sure that you have the correct electrical supply and

the recommended grounding method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps to

see which step was skipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

To test and clean your washer, make sure there are no clothes in the washer and add one

AFFRESH r,, tablet to the washer drum. Select POWER/CANCEl_, the Clean Washer cycle,

and then select START/PAUSE This cycle will take approximately 65 minutes to

complete. Allow the washer to complete the entire Clean Washer Cycle without

interruption.

Z'I

Electronic Controls

Flexible electronic controls are easy to use whether you are abeginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This washer provides a three-

compartment dispenser which includes separate compartments for main wash detergent,

fabric softenec and chlorine bleach. The dispenser has large pour zones. The dispenser is

self-cleaning, and can be easily removed. I_aundry products are diluted with fresh water and

added to the load at the proper time in the wash cycle.

Steam Clean

This washer has a built-in steaming unit which is combined with the Steam Clean option to

provide multiple temperatures to help remove a variety of stains from garments. Steam Clean

may be active in the Whitest Whites, Heavy Duty, and Normal/Casual cycles.

Clean Washer with AFFRESH TM Cycle

This cycle uses steam to raise the temperature of the unit and makes the washer self-cleaning,

flushing the machine's interior free of dirt and other residue. The use of AFFRESH r_,washer

cleaner or liquid chlorine bleach with this cycle will remove and help avoid odor-causing

residue.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning and rinsing performance.

Two sensors determine load size, load composition, and suds level, then the sensors adjust

the water level to the proper setting. This eliminates guesswork. The water level is just right

for every wash load size.

Super Size Capacity

Since there is no agitatob you can wash largeb bulkier items such as a king-sized bedspread.

You are also able to wash more clothes at one time, which means fewer loads.

Smooth Balance _MSuspension System

To reduce washer "walk" and "off-balance" conditions, your new washer combines:

• 2 Springs to isolate vibration

• 4 Shock absorbers at the washer base to minimize movement

Commercial Quality Stainless Steel Drum

The commercial quality stainless steel drum eliminates corrosion and enables higher spin

speeds for more water extraction, reducing drying time compared to traditional front-load

washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with fewer, larger loads, and lowers

your water and energy bills by helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the cycle selected. This factory

setting can be changed, however. This washer offers up to five different spin speed choices.

Heating Element

This washer has a heating element that automatically heats the water to the optimal

temperature on select cycles. This enables stepped cleaning, a process in which warm water

is brought in and mixed with detergent first, then the water is heated. Stepped cleaning starts

the wash cycle with warm water to help remove stains (such as blood and grass). This heater is

active in the Whitest Whites, Heavy Duty, and Normal/Casual cycles.

Automatic Temperature Control

The automatic temperature control electronically senses and maintains a uniform water

temperature. Automatic temperature control regulates incoming hot and cold water.

Automatic temperature control is automatically turned on when a cycle is selected.

Add Clothes

Clothes can be added to the load during the first 8 minutes of the cycle. During this time,

the Status Indicator will indicate it is okay to add clothes.

Special Cleaning Action with Sensi-Care _ Wash System

This washer channels 100% of the water through the dispensers to assure thorough rinse-out

and mixture of all the laundry products before they touch any garments. The water is then

sprayed from the top front onto the center of the load, providing even distribution and

optimum cleaning performance. It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Efficient Detergent System

This washer has a specially designed valve that closes during the wash portion of the cycle

so that 100% of the water and detergent mixture is used on the load. The Efficient Detergent

System ensures that no water or detergent is wasted.

Dynamic Off-Balance Detection

This washer uses two sensors to detect load size and the amount of off-balance within the

load. The suspension system and controls are specially designed to redistribute the load

automatically.

WASHER USE

5000 SERIES with steam (i,__

NOTE: The panel shown above may be different from that of your model.

sensimg_st_m_te_timea

dot_e_

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

The following is a guide to using your washer. Please refer to specific sections of this manual

for more detailed information.

Do not store laundry products on the top surface of this washer. Vibration is normal during

operation.

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times, and reduced rinsing performance. It may also result in component "

failures and noticeable mold or mildew. HE detergents are made to produce the right amount ,,_

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use

less detergent based on load size.

Use only HE High Efficiency detergent.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during the final installation step,

choose the Normal/Casual cycle and run it without clothes. Use only HE High Efficiency

detergent. Use I/_ the manufacturer's recommended amount for a medium-size load. This

initial cycle serves to ensure the interior is clean before washing clothes.

For All Wash Cycles

Open the washer door by pulling on the handle. Sort laundry according to color and type

of fabric. Place a load of sorted clothes in the washer. Do not overload washer.

Overloading can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed. Washer door should dose easily.

• Mix large and small items and avoid washing single items. Load evenly.

• It is recommended that you wash small items such as infant socks in a mesh garment bag.

• When unloading garments, occasionally check under the gray colored sea[ at the

front of the tub for small items.

2. Close the washer door by pushing it firmly until the lock dicks. The washer door win

remain locked during the wash cycle.

NOTE: After any wash cycle is completed, the door must be opened and then dosed

before a new cycle can begin. The door can be opened only if START/PAUSE or POWER/

CANCEl_ is selected while the Add Clothes light is illuminated or if the cycle was

canceled. See "To cancel a cycle" in Changing Cycles, Options, and Modifiers section.

3. Open the dispenser drawer and add laundry products to the main wash detergent,

chlorine bleach, or fabric softener compartments. Close drawer slowly to avoid spins. See

"Using the Dispenser."

4. Turn on the washer by selecting POWER/CANCEl_. Select one of the cycles by turning the

cycle selector. The indicator light for the selected cycle will illuminate. When selecting a

wash cycle, the preset Options, Wash Temp, Spin Speed, and Soil I_evel for the selected

cycle will illuminate. The display shows the estimated time remaining. The preset settings

provide the recommended fabric care for the selected cycle. See "Cycles."

5. Select the desired Options, such as Max Extract TM, Extra Rinse, and Steam Clean. Not all

options are available with all cycles. See "Options."

6. Select the desired Modifiers, such as Soil I_evel, Wash Temp, and Spin Speed. Not all

modifiers are available with all cycles and options. See "Modifiers."

7. If desired, select SIGNAl_ ON/OFF. The signal is helpful when you are washing items that

should be removed from the washer as soon as it stops.

8. To begin the wash cycle immediately

Select START/PAUSE.

• If you do not select START/PAUSE within 60 minutes of choosing a cycle, the washer

automatically shuts off.

When the wash cycle is complete, the status indicator shows Done, the door unlocks,

and the wash load can be removed from the washer. The washer powers down

automatically 5 minutes after the cycle is complete and the Done light goes off. To

power clown the washer manually after the wash cycle is complete, select POWER/

CANCEl. once.

Your new washer has a dispenser drawer with three separate compartments for your laundry

products--one is for detergent, one is for liquid chlorine bleach, and one is for liquid fabric

softener. I.aundry products are diluted and dispensed automatically at the proper time during

the wash cycle, making it unnecessary for you to return to the washer during the cycle to add

them.

It is normal for small amounts of water to remain in the dispensers when the wash cycle

is complete.

I)o not put laundry products directly into the wash tub. Always use the proper dispensers

when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, win create too much

sudsing with a regular non-HE detergent. Using regular detergent win likely result in washer

errors, longer cycle times, and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use. Remember, concentrated detergents such as 2x or higher win use

less detergent based on load size.

Use only HE High Efficiency detergent.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid a spill).

...........

Dispenser

A. Detergent type selector

B. Main wash compartment

C. Dispenser release lever

D. Chlorine bleach compartment

E. Fabric softener compartment

Main wash compartment

(I.etter B in Dispenser Illustration)

Add liquid or powdered HE detergent to this compartment for your wash cycle. The detergent

type selector (A) must always be in the correct position for the detergent type used. Slide the

detergent type selector to the correct position.

IMPORTANT:

• I.iquid or powdered color-safe bleach may be added to the Main Wash compartment

along with the same type of liquid or powdered detergent.

• Use the detergent and color-safe bleach manufacturer's recommended amount for

load size.

• If you are using the Delay Wash option, powdered laundry products should be used

in the main wash compartment because liquid products may seep out of the

compartment before the main wash begins.

• I.iquid detergent:

Selector in position for fiquid detergent

A. Detergent type selector

B. Main wash compartment

Powdered detergent:

LIQUI

IJ,I.

<::]L|QUiD

PREWASHA

MAINWASHV

Selector in position for powdered detergent

A. Detergent type selector

B. Main wash compamnent

LIQUI

Chlorine bleach compartment

(I.etter I_)in Dispenser Illustration)

Add no more than 2/-4cup (160 ml.) liquid chlorine bleach to this compartment. The bleach

will be automatically diluted and dispensed at the best time during the first rinse after the

wash cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not

guess. Follow the manufacturer's directions for proper use.

• Do not fill beyond the "MAX" [eve[. Overfilling could cause garment damage.

Fabric softener compartment

(I.etter E in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

NOTES:

• Pour only liquid fabric softener into the dispenser.

• Do not overfill. The dispenser holds _/4cup (60 ml.).

• The fabric softener is dispensed in the rinse cycle. If Extra Rinse is selected,

the fabric softener will be dispensed during the Extra Rinse.

• Do not use fabric softener dispensing balls in this washer. Dispensing balls will not

operate correctly with this washen

• Do not spill or drip any fabric softener onto the clothes.

• At the end of the cycle, a small amount of water may be left in the dispenser.

This is normal.

............., i ni!i

To pause the washer at any time, select START/PAUSE.

To continue the cycle, select START/PAUSE (for approximately 1 second).

Z'I

.......... _:' O _ .........

Not all Options and Modifiers are available with all cycles. Cycles, Options, and Modifiers

can be changed anytime before START/PAUSE is selected.

Options and Modifiers can be changed anytime after START/PAUSE is selected and before the

start of the selected Option or Modifier.

To cancel a cycle and begin a new cycle

1. Select POWER/CANCEl. twice.

2. Select desired cycle.

3. Select the desired OPTIONS.

4. Select START/PAUSE (for approximately 1 second) to restart the washer at the beginning

of the new cycle.

To cancel a cycle

1. Select POWER/CANCEl once.

2. The washer powers down, the door unlocks, and clothes can be removed.

NOTE: If the water [eve[ or the temperature is too high, the washer will drain automatically

before the door unlocks.

To change Options or Modifiers after the cycle has started

1. Select START/PAUSE once.

2. Select the desired OPTIONS or MODIFIERS.

3. Select START/PAUSE (for approximately 1 second) to continue the cycle.

To drain the washer manually

1. Select START/PAUSE once.

2. Select DRAIN/SPIN.

3. Select START/PAUSE (for approximately 1 second) to begin the drain.

4. When the spin is complete, the door unlocks. Items can be removed from the washer.

This indicator shows which portion of the cycle the washer is operating and the estimated

time remaining. It also indicates when you can add an additional item to the wash cycle and

when the controls are locked.

estimated time remaining

sensing estimated time

delay add wash rinse spin done

clothes

Adding items

This washer allows an 8-minute period in which other garments may be added to the load.

You can add items to the washer if the status indicator shows Add Clothes.

To add items

1. Select START/PAUSE once. The washer door unlocks, and items can be added.

2. To continue the cycle, dose the door and select START/PAUSE (for approximately

1 second).

3. To unlock the door after the Add Clothes period, press POWER/CANCEl. twice.

This will cancel the Wash Cycle.

Cycle done

The cycle done indicator stays on for 60 minutes, until the door of the washer is opened,

or the Power/Cancel button is pressed.

Sanitize

Cycles certified by NSF International an independent, third party testing and certification

organization are those with the sanitize temperature selection available. The certification

verified that these cycles reduce 99.9% of bacteria typically found on clothing, bedding,

and towels. There is no carryover of bacteria between loads after the cycle is complete. Only

cycles with sanitize wash temperature selected have been designed to meet the requirements

of NSF Protocol P172 for Sanitizing Efficacy.

Certified to Sanitize

Locking controls

The Control I.ock avoids unintended use of the washer. You can also use the control lock

feature to avoid unintended cycle or option changes during a cycle. When Control I.ock light

is [it during a cycle, all buttons are disabled except for the Control I.ock, Power/Cancel, and

Start/Pause buttons.

To lock the controls

Select and hold CONTROl. lOCK button for 3 seconds.

control lock

hold 3 seconds

The CONTROl_ I_OCK status light illuminates.

To unlock the controls

Select and hold CONTROl. lOCK for 3 seconds until the Control I.ock status light turns off.

Door Locked

When the status light illuminates, the door is locked.

Estimated time remaining

The cycle time varies automatically based on your water pressure, water temperature,

detergent, and clothes load. The cycle time will be extended if oversudsing occurs or the load

is unbalanced. The SUDs routine removes extra suds and assures proper rinsing of your

clothes. During the unbalance routine, the time displayed may pause until this activity is

complete, then resume with the cycle. These routines may add up to a half-hour to the default

cycle time.

Cycles can be selected by turning the Cycle control knob to the desired cycle. Each cycle

is designed for different types of fabric and soil levels.

nornlal_

casual delicate

quick wash

whitest

whites handwash

soal_ lean washer

with aflresh

drain &spin :loor locked

sp'nl press pause to untockrinse &

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed, and

may have preset options. The preset settings provide the recommended fabric care for the

selected cycle.

The preset settings can be changed anytime before START is pressed. Not all options and

modifiers are available with all cycles. (To change settings after the cycle has started, press

PAUSE once, then select the desired settings. Press START again to continue the cycle.)

Whitest Whites

This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of

bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides

optimal rinse performance to avoid chlorine residues on your laundry. This cycle combines

high-speed tumbling, longer wash time, and fast-speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics, and heavily soiled garments. This

cycle combines fast-speed tumbling, longer wash time, and extra high speed spin to shorten

drying times. If the water temperature is lower than needed for this cycle, the heater will

warm the water to the optimum temperature.

Normal/Casual

Use this cycle to wash normally soiled cottons and linens. This cycle combines medium-

speed tumbling and extra high-speed spin.

Delicate

Use this cycle to wash no-iron fabrics and garments labeled "Permanent Press" or "Wrinkle

Free" or that indicate using a "Gentle" cycle on the care label. This cycle combines low-speed

tumbling and medium-speed spin to help reduce wrinkling.

Quick Wash

Use this cycle to wash small loads of lightly soiled garments that are needed in a hurry. This

cycle combines fast-speed tumbling, a shortened wash time, and extra high speed spin to

shorten drying time.

Handwash

Use this cycle to clean hand washable and special-care garments. Similar to the way garments

are hand washed in a sink, the wash action of this cycle combines periods of low-speed

tumbling and soaking. I.ow-speed spin helps reduce wrinkling.

Clean Washer with AFFRESH TM

Use this cycle once a month to keep the inside of your washer fresh and clean. This cycle uses

a higher water level in combination with AEERESH TM washer cleaner or bleach and steam, to

thoroughly clean the inside of your washer. This cycle should not be interrupted. See

Cleaning Your Washer in the Washer Care section.

IMPORTANT: I)o not place garments in the washer during the Clean Washer cycle.

Rinse & Spin

Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and extra

high speed spin. If desired, you can reduce the spin speed by selecting the speed you want

from the Spin Speed modifier.

A Rinse & Spin cycle is useful for:

• I.oads that need rinsing only, like swimsuits.

NOTE: For more delicate loads, when using a Rinse & Spin cycle to rinse swimwear,

change the Speed Spin Modifier setting to Medium or I.ow to avoid fabric stress.

• Adding fabric softener to a load.

Drain & Spin

Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is

preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want

from the Spin Speed modifier.

NOTE: I.oads of synthetics, delicate fabrics, hand washables, and washable woolens should

be drained with no spin or low spin speed to avoid fabric stress.

Soak

Use the Soak cycle to remove small spots of set-in stains on fabrics. This cycle provides a soak

time with warm or cold water followed by drain. Extra water, a short tumbling phase for equal

distribution of the laundry, and a soaking time without drum movement improve the removal

of set-in stains. Drain without spin assures gentle treatment, even for delicate articles.

Z'I

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The

preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycles Soil Level Water Temp Spin Speed

(cycle time)

Whitest Whites Normal Hot/Cold Extra High

(1:15)

Heavy Duty Heavy Hot/Cold Extra High

(1:20)

Normal/Casual Normal Warm/Cold Extra High

(0:50)

Delicate Normal Warm/Cold Medium

(0:40)

Quick Wash I_ight Warm/Cold Extra High

(0:30)

Handwash Normal Cold/Cold I.ow

(0:30)

Clean Washer N/A Sanitize N/A

with (1:05)

AFFRESH TM

Rinse & Spin N/A Cold/Cold Extra High

(0:22)

Drain & Spin N/A N/A Extra High

(0:13)

Soak Normal Warm/Cold No Spin

(0:30)

To change the preset cycle settings

Press the selector of each setting until the desired setting illuminates.

Normal Washer Sounds

As with any new product, you will hear sounds that you are not accustomed to. You may hear

various sounds when the door is locked and unlocked, and during the washing, rinsing, and

spinning process. Between changes in wash actions, there will be momentary pauses. You

will hear water spraying and splashing during the wash and rinse cycles. These new sounds

and pauses are part of normal washer operation.

You can customize your wash by adding options to your cycle selections. You can add or

change an option after starting a cycle anytime before the selected option begins. Not all

options are available with all cycles.

power • cancel norma[,

casual

start o pause

delicate _'_

dut quick wash

whitest [ ]

whites handwash maxextract

[ extrarinse ]

[st lean }....

options

_yd_s

:lean washer

[ J soal

signal on • off with affrSSh

drain & spin :[oor locked

rinse & Spln press pause to unlock

See the "l.aundry Guide" for an overview of possible options for each Wash Cycle

selection.

You can select more than one option for a cycle. Some options cannot be added to some

cycles; for example, Steam Clean cannot be added to the Quick Wash cycle.

If an option is available with a selected cycle, the light for that option will illuminate

when selected.

If an option is unavailable with a selected cycle, there will be a short tone, and the light

for that option will not illuminate when selected.

Signal On/Off

Use this option to turn the buzzer indicating the end of the cycle on or off.

Max Extract TM

Use this option to add an additional spin to any cycle to improve drying times for some heavy

fabrics by reducing excess wateb which may save energy.

Steam Clean

Use this option for heavily soiled loads that need improved stain treatment or loads with

multiple types of stains. When Steam Clean is selected, the water temperature of the selected

wash cycle is automatically set to warm. The water will then be slowly heated to the

temperature selected, along with steam, to aid in stain removal This option will provide

optimal removal of organic stains such as blood and temperature-sensitive stains such as oil,

in the same cycle. This option is available on the following cycles: Normal/Casual, Heavy

Duty, and Whitest Whites.

Extra Rinse

A second rinse can be used to aid in the removal of detergent or bleach residue from

garments. This option provides an additional rinse with the same water temperature as the

normal rinse. This is the default rinse setting for the Whitest Whites cycle.

Preset cycle settings of Soil I.evel (cycle time), Wash Temperature, and Spin Speed can be

changed. You can change these settings by using modifiers. Modifiers can be changed before

or during the cycle until that part of the cycle starts. Not all modifiers are available with all

cycles and options.

[m extra high

U sanitize [m high

[U heavy U ATC hot _ medium

g normal B ATCwarm _ low

light _ cold _ no spin

soilievel } [ washtemp [ spinspeed }

modifiers

To change Soil I.evel (cycle time), select the SOIl. I.EVEI. button until the desired setting

illuminates.

To change the water temperature, select the WASH TEMP button until the desired setting

illuminates.

To change the spin speed, select the SPIN SPEED button until the desired setting

illuminates.

Water Temp

Select a water temperature based on the type of load you are washing. Use the warmest wash

water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads drier than cold rinses. Warm rinses increase wrinkling. In cold

climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.

• Cycles certified by NSF International, an independent, third party testing and certification

organization are those with the sanitize temperature selection available. The certification

verified that these cycles reduce 99.9% of bacteria typically found on clothing, bedding,

and towels. There is no carryover of bacteria between loads after the cycle is complete.

Certified to Sanitize

• The Sanitize water temperature provides an extra high temperature wash to remove

99.9% of certain bacteria. It is recommended that you set your hot water heater to

120°F (49°C) to ensure proper performance during this cycle.

• The Sanitize water temperature is extremely hot. Please check garment care labels to

avoid garment damage.

In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.

Soils may be difficult to remove. Only cycles with sanitize wash temperature selected .......

have been designed to meet the requirements of NSF Protocol P172 for Sanitizing

Efficacy. :::::::,,,

Wash Water Temperature Suggested Fabrics

SANITIZE Sturdy colorfast fabrics

Heavy soils

HOT Sturdy colorfast fabrics

Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

Light soils

In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve weft.

Soils may be difficult to remove.

Automatic Temperature Control

The automatic temperature control electronically senses and maintains a uniform water

temperature. Automatic temperature control regulates incoming hot and cold water.

Automatic temperature control is automatically turned On when a cycle is selected.

See "Preset Cycle Settings" in Cycles.

• Automatic temperature control works for all wash and rinse temperature settings.

Refertothischartforsuggestedloadtypesandtheircorrespondingcycles.Listedtotherightaretheoptionsavailabletoeachofthesewashercycles.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Signal Delay Extra Steam Max

ON/OFF Start Rinse Clean Extract TM

Whitest Whites Heavily soiled white fabrics _/ _/ _/ _/ _/

Heavy Duty Heavily soiled underwear, towels, work clothes, shirts, etc. _/ _/ _/ _/ _/

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of polyester, nylon, linen, _/ _/ _/ _/ _/

or cotton blends

Quick Wash I.ight[y soiled sports wear made of cotton, polyester, nylon, or cotton blends _/ _/ _/

Delicate Use this cycle to wash no-iron fabrics and garments labeled "Permanent Press," _/ _/ _/

or "Wrinkle Free" or that indicate using a "Gentle" cycle on the care [abe[.

Handwash Fabrics made of silk, special-care items marked "Handwashab[e". _/ _/ _/

Soak Fabrics made of cotton, linen, polyester, or nylon _/ _/

Rinse & Spin Fabrics made of cotton, linen, polyester, or nylon _/ _/ _/ _/

Drain & Spin Fabrics made of cotton, linen, polyester, or nylon J J J

Clean Washer No clothes _

iiiiiii[[[[iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii__i!i[ii!i_iii][iii_

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of your garments.

• Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in

washer errors, longer cycle times, and reduced rinsing performance. It may also result in

component failures and noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use. Remember, concentrated detergents such as 2x

or higher will use less detergent based on load size.

Use only HE High Efficiency detergent.

Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and

other hard objects to avoid scratching the washer interior. Remove non-washable trim and

ornaments.

• Empty pockets and turn them inside out.

• Turn down cuffs; brush away lint and dirt.

• Turn woo[ and synthetic knits inside out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best results.

• Mix large and small items, avoid washing single items, and load evenly.

• Wash small items, such as infant socks, in a mesh garment bag. To create a balanced load,

it is recommended that more than one garment bag be used, and that each garment bag

be filled with equal amounts of material

La page charge ...

Maytag MHWE500VP - Performance Series Front Load Washer Mode d'emploi

Marque: Maytag

Modèle: MHWE500VP - Performance Series Front Load Washer

Catégorie: Machines à laver

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MHWE500VP - Performance Series Front Load Washer User guide

Maytag MHWE500VP - Performance Series Front Load Washer Mode d'emploi

Maytag MHWE500VP - Performance Series Front Load Washer Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents