Jimmy JV63 Manuel utilisateur

Catégorie
Aspirateurs
Taper
Manuel utilisateur
Instruction Manual Vacuum Cleaner
Bedienungsanleitung Staubsauger
Manual de Usuarios Aspiradora
Manuale di istruzioni Aspirapolvere
Mode d’emploi Aspirateur
Руководство по эксплуатации Пылесос
JV63/JV65
1
Contents
English 2
русский язык 89
Français 71
Italiano 53
Español 36
Deutsch 18
2
Before use
Unpacking
Open the package, take out the foam pad , all accessories and machine from the package, take
off the plastic bag and save them for the purpose of future maintenance and repair.
Parts Name
Electric Floor Head
Floorhead release button
Metal tube
Metal tube release button
Dirt cup release button
Power button
Electric mattress tool
Carpet brushroll
Stretch hose
Soft brush
Connector
2-in-1 crevice tool
2-in-1 upholstery tool
Charging holder
Adaptor
3
Main-body Assembly
Connect the electric oor head with metal tube
Hold the oor head with left hand, use right hand to insert the metal tube vertically into oor
head, align with the conductive needle, press the handle until a “click” sound is heard.
Attention: Keep the handle and oor head in the same direction, conductive needle shall align
with the socket.
Assemble the electric head oor, metal tube and handheld vacuum cleaner
First, assemble the floor head and conductive metal tube based on the assembling method
of electric oor head and conductive metal tube. Secondly, align the conductive needle of the
conductive metal tube with the suction mouth conductivepipe, push upwards until a “click” sound
is heard.
JV63 JV65
Handheld vacuum
Floorhead
Metal tube
2-in-1 upholstery tool
Electric mattress tool
2-in-1 crevice tool
Carpet brushroll
Stretch hose
Soft brush
Connector
Adaptor
Charging holder
Instruction manual
Packing List
Model
Name
Outer lid
Electric Floor Head
Aligh with conductive
needle
Electric Floor Head
Metal tube
Handheld vacuum
4
Charge holder assembly
Remove the adhesive glue cover on the back of the holder and push the holder against a
smooth wall with holder height 1-1.1M away from oor. (It is recommended that the installation
height of the holder be determined according to the height of the holder off the ground after the
whole machine is put on holder.) Press it for 5 seconds with 50N force to make the glue adhere
to the wall. It is convenient for the hand-held vacuum cleaner to store on the wall.
Charging holder
Handheld vacuum
JV63 JV65
2-in-1 crevice tool
Electric mattress tool
2-in-1 upholstery tool
Stretch hose
Soft brush
Connector
Model
Name
Assembly of accessories
For ease of use, this product is specially equipped with accessories for the hand-held vacuum
cleaner. The handheld can connect to different tools for different cleaning purpose.
5
Handheld vacuum
Handheld vacuum
2-in-1 upholstery tool
2-in-1 crevice tool
stretch hose
Connect handheld vacuum cleaner with 2-in-1 upholstery tool
Insert 2-in-1 upholstery tool connector into the handheld air inlet until it is tightly tted.
Attention: The handheld vacuum can also connect other accessories:Electric mattress tool/2-
in-1 crevice tool/connector/stretch hose/soft brush. The connecting method is the same as 2-in-1
upholstery tool.
Connect handheld vacuum cleaner with accessories through stretch hose
Align the vacuum cleaner with stretch hose, insert until it is fully tightened; Connect another end
of stretch hose with tools.
Attention: The handheld vacuum can connect to these accessories: 2-in-1 crevice tool, 2-in-1
upholstery tool, connector, soft brush. The connecting method is the same as 2-in-1 upholstery
tool.
Accessories Connection List
6
Use of vacuum cleaner
Charging
During using the vacuum cleaner, when indicator blinks in red, the machine need to be charged.
When the voltage is too low, to protect the battery, the vacuum will automatically turn off. At this
time, the vacuum must be charged.
Remove the rubber plug on back on handheld vacuum, insert adaptor tail into charging socket
on machine. Lean the product on charging holder. Indicator turns red when it starts to charge
and turns green when it nishes charging.
Charging time is about 5 hours. When the charging indicator on the hand-held vacuum turns
from red to green, it means the vacuum cleaner is fully charged. We recommend continue
charging for half an hour to one hour, so that the charging effect is better. After charging, unplug
the charger to stop charging.
Attention:
1.When using the machine for the rst time, the battery capacity is not full, need to charge the
machine. The machine is able to be used after the battery is charged fully.
2.When using the vacuum cleaner for the rst time, fully charge the battery and fully discharge
the battery before second charge to increase the battery life.
Adaptor
Rubber plug
Charging indicator
7
Use of Handheld Vacuum Cleaner
Take the handheld vacuum from the charging holder, press the on/off button to turn on and turn
off the vacuum. Green indicator lights up, it is normal mode, press the speed control button
to strong mode, the speed control button can switch between strong mode and normal mode
easily.
Attention:JV63 and JV65 has normal/middle/strong three modes.
Use of Electric Floorhead
Electric oorhead can clean short hair carpet
,
hardoor or tile oor.
Attention:
When the electric floorhead is running, if brushroll stopped running due to big foreign object
blockage or excessive fiber entangle, or the child accidentally putting hand into brushroll, the
floorhead will stop working to protect personal safety and avoid damage to floorhead motor.
Power button On/off button
8
Use of Accessories
2-in-1 crevice tool: Suitable to clean crevices, corners and other narrow areas.
2-in-1 upholstery tool: Suitable to clean dust on closet, sofa,windowsill and table surface.
9
Electric Mattress Head: Beats up and cleans dust、dust mite and dust mite allergen from sofa
and bed.
Soft brush and stretch: Stretch hose to connect handheld vacuum cleaner and accessories to
clean hard to reach areas. Soft bruh is suitable to clean easily scratched furniture,such as book
shelf, artworks.
10
Cleaning and Replacing Parts
Attention:
1.HEPA lter is available for sale from local vacuum cleaner distributors.
2.It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA
lter is clogged, it needs to be cleaned and replaced if necessary. Floorhead brushroll might
be entangled with hair after long time use, it needs to be cleaned in time to keep the vacuum
working more efciently.
Cleaning Dust Cup
release button, rotate and remove dust cup in the arrow direction.
Lift out cyclone assembly and empty the dust in dust cup.
Dust cup release button
Take off dust cup in
arrow direction
11
Clean ltration system
Hold the HEPA and rotate arrow direction. Take out HEPA; Rotate the cyclone in arrow direction
to take out cyclone assembly. Clean or wash the HEPA, foam lter, cyclones.
If HEPA and foam lter are washed, they need to be completely dried to be used again. (Replace
if necessary). After cleaning, assemble all parts in the opposite direction as disassembly.
Attention:HEPA and fom lter need to be completely dry before assembly.
12
Cleaning Electric Brushroll
Take out brushroll to clean brushroll.
1.Push brushroll release button, brushroll will automatically bump out.
2. Take out one side of the brushroll in the same direction as shown on the picture, then
brushrollcan be taken out to clean.
3.After cleaning and replacing, reassemble it in opposite sequence.
Brushroll release button
Floorhead release button
1.Push brushroll release button
2.Take out brushroll
Storage of Vacuum Cleaner
Disassemble electric oor head and metal tube
When store or clean the vacuum cleaner, if you need to disassemble the electric oor head,
press the electric oor head release button, pull upwards the metal tube.
13
Safety Notes
This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.
Please read this instruction manual carefully before use, properly save and store it for future
use.
Do not put the vacuum close to fire or other high temperature facility.
Do not use or store the machine under extreme bad conditions, for example, extreme
temperature. It is recommended to use it indoors between the temperature of 5℃ to 40℃. Store
the machine in dry place and avoid direct sunlight.
Fully charge the battery before first use or after long storage.
Before using the vacuum, make sure brushroll is assembled, otherwise, it may lead to motor fan
blockage, causing motor burn out.
Disassemble the Handheld Vacuum Cleaner and Metal Tube
Hold the handheld, press the release button of metal tube, pull out it.
Machine Storage
If the machine is not used for a long time, properly pack it and store it in cool and dry place,
avoiding direct sunlight or humid environment.
Handheld vacuum
Metal tube release button
Metal tube
14
Please do not use the vacuum to pick up detergent, oil, glass slag, needle, cigarette ash, wet
dust, water, matches, etc.
Please do not use the vacuum to pick up tiny particles such as cement,gypsum powder, wall
powder, or large objects such as paper balls, otherwise it will cause malfunctions such as
blockage and motor burnout.
Avoid blockage to air inlet or brushroll, it may cause motor failure.
Do not put your hand or foot into floorhead inlet to avoid body hurt.
Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the
machine.
If the brushroll is not working, please check whether the brushroll is entangled with hair or other
long fiber, clean it in time.
When storing the machine for a long time, ensure that the battery is fully charged before storage
and charge the machine at least every three months.
Unplug the charger to clean or repair the machine. Hold the charger when plugging or
unplugging it, and do not pull the charging cord.
Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, lacquer thinner will cause
crack or colour fading and cannot be used.
If the machine is not working after fully charged, it must be checked and repaired in our
designated office, please do not dismantle the machine on your own.
Discarded machine contains batteries. They should be recycled safely. Do not discard them
randomly.
If there is damage on power cord, to avoid danger, it should be replaced or repaired by
manufacturer、repairing agency or professional person.
15
Trouble Shooting
Please check the following issues before sending to designated repair ofces.
Symptoms Possible Causes Solutions
Machine not working
Battery has no power Charge the vacuum cleaner
Metal tube, electric floor
had, is not assembled
correctly to the vacuum
cleaner
Check the accessories are
assembled correctly to the
vacuum cleaner
Machine stops working
during use
Main motor temperature
overheat and activates
temperature protection
machine for 5 to 10 minutes
Check whether cyclone
systems needs cleaning
Brushroll stops running
during use
Floorhead
overloaded(Such as
working on carpet, too
much hair entangled
around brushroll)
machine for 5 to 10 minutes
whether brushroll needs
cleaning
Machine drops from
strong to normal mode
automatically
Cyclone system is blocked
and activates main motor
over speed protection
Clean dust cup and cyclone
system
Suction drops
Dust cup full Clean dust cup and cyclone
Filter blocked Clean or replace filter
Floorhead air path blocked Clean floorhead air path
Charging indicators red
and green light flickers
alternately during charging
contact to machine or
power socket
Replug charger to machine
and power socket
Short working time after
charging
Machine not fully charged
Follow instruction manual to
fully charge the battery
Battery old aging Replace battery
Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine
must be repaired or replaced by manufacturer, other maintenance ofces or professionals from similar ofces.
16
Product Specication
Technical Parameter
Circuit diagram
Model No. JV63 JV65
Rated Voltage
25.2V
28.8V
Rated Power 450W 500W
Adaptor Input Voltage 100-240V ~ 50-60 Hz 100-240V ~ 50-60Hz
Adaptor Output Voltage 30V 600mA 34.2V 600mA
Model No of Electric Floor
Head
JV63 JV65
Rated Power of Electric Floor
Head
30W 30W
Model No of Electric Mattress
Head
T-CS7.0B T-CS7.0A
Rated Power of Electric
Mattress Head
20W 20W
Battery pack capacity
2500mAh 2500mAh
Charging time
5h 5h
M
Floorhead
motor
Adaptor
Battery
Indicator PCB
Main motor
Battery PCB
Handheld
switch PCB
17
Manufacturer Information
Manufacturer Kingclean Electric Co., Ltd
Address
No.1 Xiangyang Road, Suzhou New District,
Jiangsu Province 215009, China
Disposal
The machine, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of the machine into household waste!
Only for EC countries: According to the European Guideline 2012/19/EU, machine that are no
longer usable, and according to the European Guideline 2006/66/EC, defective or used battery
packs/batteries, must be collected separately and disposed of in an environmentally correct
manner.
Battery packs/batteries:
Integrated batteries may only be removed for disposal by qualied personnel. Opening the
housing shell can damage or destroy the machine.
Do not dispose of battery packs/batteries into household waste, re or water. Battery
packs/batteries should, if possible, be discharged, collected, recycled or disposed of in an
environmental-friendly manner.
Subject to change without notice.
Warranty Information
This product enjoys two year warranty from the date of purchase.
Excluded from the guarantee is normal wear, commercial use, alterations to the appliance as
purchased, cleaning activities, consequences of improper use or damage by the purchaser
or a third person, damage, that can be attributed to external circumstances or caused by the
batteries.
18
Vor dem Gebrauch
Auspacken
die Packung öffnen, Schaum Blindholz holen, die Maschine greifen, alle Zubehörteile and
Material holen , Plastiktüte herunterholen. äußere Packung halten, um den künftigen Transport
zu breiten.
Teile Name
Elektrische
Bodenbürste
Entriegelungsknopf für
Bodenbürste
leitfähiges
Metallrohr
Entriegelungsknopf für
Metallrohrs
Entriegelungsknopf für
Staubbecher
Schalter für
Geschwindigkeitskontrolle
Elektrische Bürste
Bürste für Teppiche
Teleskopschlauch
Weiche
Bürste
Adapter
Zwei-in-eins Spalt
Werkzeug
Zwei-in-eins
Polstermöbel
Werkzeug
Haken
Zwischenstecke
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Jimmy JV63 Manuel utilisateur

Catégorie
Aspirateurs
Taper
Manuel utilisateur