DK2 OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower Manuel utilisateur

Marque: DK2

Modèle: OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower

Taper: Manuel utilisateur

Customer Service / Monday-Friday 8am-4pm EST / 1-888-277-6960 www.dk2.com

DK2 USA WEST

3311 MEADE AVENUE STE

E DOCK 13, LAS VEGAS, NEVADA

89102 USA

DK2 USA EAST

3750 SOUTH AVENUE

NORTH UNIT, TOLEDO, OHIO

43615 USA

DK2 CORPORATE HEAD OFFICE

5330 MAINWAY

BURLINGTON, ONTARIO

L7L6A4 CANADA

OPB480EV

1271 CFM 57.6V LI-ION POWERED WALK-

BEHIND LEAF BLOWER

USER MANUAL

2 | OPB480EV man.

WARRANTY

PLEASE DO NOT RETURN TO THE STORE

YOU HAVE A 1-YEAR WARRANTY AND DK2 WILL REPLACE A DEFECTIVE PART FOR FREE.

CALL US AT 1-888-277-6960 FOR FAST WARRANTY PARTS AND QUESTIONS.

WHAT IS COVERED – 1-YEAR LIMITED WARRANTY INCLUDED

DK2 Inc. warrants to the original purchaser that product will be free and clear of manufacturing

defects in workmanship and materials under normal use and service for a period of one (1) year

from the date of the original purchase. If within one (1) year from the original date of purchase this

product fails due to defect in material or workmanship, DK2 Inc. will repair, replace, or supply any

covered defective part at our option. DK2 Inc. is 1-year parts only warran no labor.

Upon expiry of one (1) year, DK2 Inc. will have no further liabili related to the product. DK2 Inc.

does not authorize any par, including its authorized distributors or dealers, to oer any other

warran on behalf of DK2 Inc.

THIS WARRANTY DOES NOT COVER OR APPLY TO:

a) Damage to the product due to misuse, mishandling and abuse

b) Improper installation, maintenance and storage

c) Expendable parts such as nuts and bolts, pins and springs, wiring and switch components,

hydraulic hoses and ﬁings, cuing teeth, cuing chains, cuing blades, throles, belts and

tires.

d) Normal wear and tear

e) Consequential damage & incidental damages such as damage to persons or proper

PROCEDURE FOR OUTDOOR POWER EQUIPMENT WARRANTY

Within the one (1) year warran period, the purchaser of the product can CALL 1-888-277-6960 or

At this time the validi of the claim will be determined, and if approved replacement parts will be

issued. No returned product will be accepted under warran unless accompanied by an RGA#

issued by DK2 Inc.

DAMAGED FREIGHT

Damage to your product caused by freight mishandling is NOT covered under warran. If your

freight arrives damaged, REFUSE it. Inspect your product when it arrives, otherwise if you accept

it, you will be responsible for ﬁling any freight claims with the delivery company. DK2 Inc. warran

excludes damage to product.

RESOLUTION FOR A DEFECTIVE PRODUCT.

Call us at 1-888-277-6960 between 8am-4pm Monday to Friday EST.

ENGLISH

v.230906 | 3

ONLINE RESOURCES

LEARN MORE ABOUT YOUR PRODUCT

Visit your product’s web page by visiting detailk2.com/shop-elite-

energy/p/opb480ev-k or scan the QR code on the le.

PURCHASING REPLACEMENT PARTS

In need of replacement parts? visit detailk2.com/shop-parts or

scan the QR code on the le.

VIEW THIS USER MANUAL ON YOUR PHONE

Scan the QR code on the le to view this product’s user manual on

your mobile device.

ENGLISH

4 | OPB480EV man.

TABLE OF CONTENTS

WARRANTY ..................................................................................2

ONLINE RESOURCES ........................................................................3

TABLE OF CONTENTS .......................................................................4

TECHNICAL SPECIFICATIONS ...............................................................5

SECTION I • SAFETY .........................................................................6

SAFETY CONVENTIONS .....................................................................7

IMPORTANT SAFETY INFORMATION .........................................................7

SAFETY DECALS .............................................................................8

SAFETY DEFINITIONS .......................................................................8

GENERAL SAFETY INFORMATION ...........................................................9

UNDERSTAND YOUR MACHINE ............................................................10

INSPECT YOUR MACHINE ..................................................................11

PRODUCT LIABILITY ........................................................................11

OPERATIONAL SAFETY .....................................................................11

GETTING TO KNOW YOUR MACHINE .......................................................13

SECTION II • ASSEMBLY ....................................................................14

STEP 1: FRONT WHEEL RACK ASSEMBLY ...................................................15

STEP 2: WHEEL RACK INSTALLATION ......................................................16

STEP 3: REAR WHEEL INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

SECTION III • OPERATION ...................................................................19

STARTING THE MACHINE ..................................................................20

STOPPING THE MACHINE .................................................................20

SECTION V • PARTS & SCHEMATICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

PARTS LIST ................................................................................22

SCHEMATICS ..............................................................................23

ENGLISH

v.230906 | 5

TECHNICAL SPECIFICATIONS

MODEL NUMBER OPB480EV

BATTERY 57.6V Max, 1,024Wh, 20Ah LiFePO4

MOTOR 2,000W (4,000W Max) 3,500 RPM cordless brushless EV-grade

motor

TORQUE 4.1 /lb (5.5 Nm) rated

18.4 /lb (25 Nm) peak

CHARGER 120V AC/DC 200W

MAX AIR FLOW 150 mph (241.4 km/h)

SPEED 215 /sec (65.5 m/sec)

AIR VOLUME 1,271 CFM (36 CMM)

MAX FLOW RATE 2.4 GPM (9.0 LPM)

WHEELS 8” (20.3 cm) (front), 10” (25.4 cm) (rear) rubber

IMPELLER SIZE 13.5” (34 cm)

DIMENSIONS 44.9” (L) x 43.3” (W) x 48” (H)

114 cm (L) x 110 cm (W) x 122 cm (H)

WEIGHT 157.6 lb (74.5 kg)

SHIPPING DIMENSIONS 26.4” (L) x 24” (W) x 22.1” (H)

67.1 cm (L) x 61 cm (W) x 56.1 cm (H)

SHIPPING WEIGHT 167.6 lb (76 kg)

WARRANTY 1-year limited

ENGLISH

SECTION I • SAFETY

v.230906 | 7

SAFETY CONVENTIONS

DANGER! This indicates a hazardous situation, which, if not avoided, will result in death or

serious injury.

WARNING! This indicates a hazardous situation, which, if not avoided, could result in death

or serious injury.

CAUTION! This indicates a hazardous situation, which, if not avoided, may cause minor or

moderate injury.

ADDITIONAL INFORMATION AND POTENTIAL CHANGES

We reserve the right to discontinue, change, and improve our products at any time without notice

or obligation to the purchaser. The descriptions and speciﬁcations contained in this manual were in

eect at printing. Equipment described within this manual may be optional. Some illustrations may

not be applicable to your machine.

IMPORTANT SAFETY INFORMATION

WARNING! Read and understand the complete User Manual before assembling

or using this product. Failure to comprehend and comply with warnings, cautions

and instructions for assembly and operation could result in serious injury or

death.

WARNING! Do not permit children to operate this equipment at any time. Do not permit

others that have not read and understood the complete User Manual to operate this

equipment. Operation of power equipment can be dangerous. It is the sole responsibili of

the operator to understand the assembly and safe operation of this product.

DANGER! INTENDED USE: Do not use this machine for any purpose other than for which it

was designed. Any other use is unauthorized and may result in serious injury or death.

DANGER! PERSONAL PROTECTIVE EQUIPMENT: When operating

this machine, it is essential that you wear safe gear including goggles

or safe glasses, steel-toed shoes and tight-ﬁing gloves (no loose

cus or draw strings). Always wear ear plugs or sound-deafening

headphones to protect against hearing loss when operating this leaf

blower.

CAUTION! Do not wear loose clothing or jewelry that can be caught

by moving parts of the machine. Keep clothing and hair away from all moving parts of the

machine.

ENGLISH

8 | OPB480EV man.

SAFETY DECALS

Make sure all safe warning decals are aached and in readable condition.

Please call DK2 at 1 (888) 277-6960 if you need help replacing missing or defaced safe decals.

SAFETY DEFINITIONS

The purpose of safe decals and symbols is to aract your aention to possible dangers. The

safe symbols, and their explanations, deserve your careful aention and review in order to safely

operate this machine. The safe warnings do not eliminate any danger, the purpose of these

warnings is to bring awareness to the dangers of the machine. The instructions or warnings they

give are not substitutes for proper accident prevention measures and care while using the product.

57.6V Li-ion BLOWER

SOUFFLEUR 57.6V Li-ion

MOTOR POWER

PUISSANCE DU MOTEUR

2000W

MAX 4000W

IMPELLER

TURBINE

14.1”

340 mm

AIR SPEED

VITESSE DE L’AIR

213.3 ft/sec

65 m/s)

(EN) Read carefully and understand all

instructions before operating. Failure to

follow the safety rules and other basic

safety precautions may result in serious

personal injury. (FR) Lisez attentivement

et comprenez toutes les instructions

avant l'utilisation. Le non-respect des

règles de sécurité et autres sécurités de

précautions de base peut entraîner des

blessures personnelles graves.

WARNING / ATTENTION

(EN) DISCHARGE OBJECTS HAZARD. To avoid

serious personal injury, please wear eye protection.

DO NOT approach the air outlet while the machine is

running. DO NOT place your hands or feet close to the

air outlet while the machine is running. (FR) RISQUE

D’ÊTRE ATTEINT PAR DES OBJETS. Pour éviter des

blessures graves, veuillez porter des lunettes de

protection. NE PAS s'approcher de la sortie d'air

pendant que le soueur fonctionne. NE placez PAS

vos mains ou pieds près de la sortie d'air quand le

soueur est en fonction.

WARNING / ATTENTION

(EN) AMPUTATION HAZARD. High speed

rotation impeller! To avoid serious injury,

please keep hands out of the discharge area

during operation. (FR) RISQUE

D'AMPUTATION. Rotation de turbine à

grande vitesse ! Pour éviter des blessures

graves, veuillez garder les mains hors de

zone de décharge quand le soueur est en

fonction.

DANGER

ENGLISH

v.230906 | 9

GENERAL SAFETY

INFORMATION

WARNING! Keep

guards in place and in

working order. Never

operate the tool with

any guard or cover

removed. Make sure all guards are

operating properly before each use.

WARNING! To reduce

the risk of injury, keep

children and visitors

away. All visitors

should wear safe

glasses and be kept a minimum 50  (15

m) safe distance from the work area.

WARNING! Keep the

area of operation

clear of all persons,

particularly small

children, and pets.

CAUTION! Use the right tool. Don’t

force tool or aachment to do a job it

was not designed for. Don’t use tool for

a purpose not intended.

DANGER! Dress

appropriately and

keep long hair

contained. Wear

long pants and long

sleeves. Do not wear loose-ﬁing

clothing, neckties, or jewelry. These

items can get caught and draw you

into moving parts. Rubber gloves and

non-skid footwear are recommended

when working outdoors. Also, wear

protective hair covering to contain

long hair.

WARNING! Wear protective footwear

that will protect your feet and improve

your footing on slippery surfaces.

CAUTION! Exercise caution to avoid

slipping or falling.

WARNING! Always wear eye

protection. Following this rule will

reduce the risk of serious personal

injury.

WARNING! Don’t overreach or stand

on a ladder, rooop, or other unstable

support. Keep proper footing and

balance at all times.

CAUTION! Use only recommended

accessories. The use of improper

accessories may cause risk of injury.

CAUTION! Follow the maintenance

instructions speciﬁed in this manual.

DANGER! Keep hands,

feet and tools away

from the blades on the

blower at all times.

CAUTION! Check damaged parts.

Before further use of the tool, a guard

or other part that is damaged should

be carefully checked to determine

that it will operate properly and

perform its intended function. Check

for alignment of moving parts, binding

of moving parts, breakage of parts,

mounting, and any other conditions

that may aect its operation. A guard

or other part that is damaged must

be properly repaired or replaced by a

qualiﬁed service center to avoid risk of

personal injury.

WARNING! Never

leave tool running

unaended. Turn

power o. Don’t leave

the tool until it comes to a complete

ENGLISH

10 | OPB480EV man.

stop.

WARNING! Keep the

motor and baery

free of grass, leaves,

or grease to reduce

the change of a ﬁre

hazard.

CAUTION! Follow manufacturer’s

recommendations for safeloading,

unloading, transport, and storage of

machine.

CAUTION! Be thoroughly familiar

with controls. Know how to stop the

product quickly.

CAUTION! Keep the tool dry, clean,

and free from oil and grease. Always

use a clean cloth when cleaning. Never

use brake ﬂuids, gasoline, petrolium

products, or any solvents to clean tool.

WARNING! Stay alert and exercise

control. Watch what you are doing and

use common sense. Do not operate

the tool when you are tired. Do not

rush.

DANGER! Do not operate the product

while under the inﬂuence of drugs,

alcohol, or any medication.

CAUTION! Check

the work area before

each use. Remove all

objects such as rocks,

broken glass, nails,

wire, or string which can be thrown or

become entangled in the machine.

WARNING! Do not use tool if switch

does not turn it o. Have the switch

replaced by a qualiﬁed service center.

WARNING! Before cleaning, repairing,

or inspecting, shut o the motor

and baery and ensure all moving

parts have stopped and cooled down

completely.

CAUTION! Avoid dangerous

environment. Don’t use in damp or wet

locations or expose to rain. Keep work

area well lit.

WARNING! Do not

operate around

dry brush, twigs,

cloth rags, or other

ﬂammable materials.

WARNING! Risk of injection or injury

- Do not direct discharge stream at

persons.

CALIFORNIA PROPOSITION

65 WARNING! This machine is

constructed with material which is

known to the State of California to

cause cancer and birth defects or

other reproductive harm. Read more

at hps://www.p65warnings.ca.gov/.

UNDERSTAND YOUR

MACHINE

CAUTION! If the unit is to be used

by someone other than the original

purchaser (or is loaned, rented, or

sold), always provide this manual and

safe training before operation. The

user can prevent and is responsible

for accidents or injuries that may

occur to themselves, other people,

and proper.

WARNING! This machine is not a toy,

and is to be used only for its intended

purpose. Therefore, exercise extreme

caution at all times. This machine has

been designed to perform one job:

ENGLISH

v.230906 | 11

blow debris and leaves from lawns,

driveways, parking lots, etc. Do not use

it for any other purpose.

CAUTION! Do not force the machine.

Use the correct machine for your

application. The correct machine will

do the job more eciently and safely

at the rate it was designed.

INSPECT YOUR

MACHINE

CAUTION! Check your machine before

each use. Keep guard in place and

in working order. Make sure all nuts,

bolts, etc., are securely tightened.

DANGER! Never operate the machine

when it is in need of repair or is in

poor mechanical condition. Replace

damaged, missing, or failed parts

before using it. Keep the machine in

safe working condition.

DANGER! Regularly check to see

that keys and adjusting wrenches

are removed from the machine area

before starting it. A wrench or key that

is le aached to a rotating part of the

machine may result in personal injury.

WARNING! Avoid accidental starting.

Be sure the motor and baery are both

o before transporting the machine

or performing any maintenance or

service on the machine with the motor

and/or baery on.

WARNING! If the machine should start

to vibrate abnormally, stop the motor

and baery and immediately check

for the cause. Vibration is generally a

warning sign of trouble.

CAUTION! Do not tamper with the

motor and/or baery in an eort

to get it to run at higher speeds.

The maximum motor and/or baery

seings are preset by the factory and

is within safe limits.

CAUTION! Keep a Class B ﬁre

extinguisher on hand when operating

this machine in dry areas as a

precautionary measure.

CAUTION! To avoid

sparking or arcing,

keep grounded

conductive objects -

such as tools - away

from exposed, live electrical parts and

connections. These events could ignite

fumes or vapors.

PRODUCT LIABILITY

As referred to in the product liabili laws, we

are not liable for damages that our product

causes if:

• The product is incorrectly repaired

• The product is repaired with parts that

are not from the manufacturer

• The product has an accessory that is

not from the manufacturer

• The product is not repaired at an

approved service center or by an

approved authori

OPERATIONAL

SAFETY

CAUTION! Never operate the blower

without good visibili or light.

CAUTION! Always ensure you have

secure footing.

CAUTION! Never place any part of

your body where it would be in danger

ENGLISH

12 | OPB480EV man.

if movement should occur during

assembly, installation, operation,

maintenance, repair, or moving.

DANGER! Keep all bystanders,

children, and pets at least 50 feet (15

m) away. If you are approached, stop

the unit immediately.

WARNING! The blower will propel

debris at high speed and can cause

damage. Avoid pushing your leaf blower

over any areas with loose stones or

gravel as they may become projectiles.

Before use, check that the area is free

from breakable objects, such as house

windows, auto glass, greenhouses, etc.

DANGER! Do not stand or put your

hands, or any part of your body in

front of the discharge opening. Always

pay aention to the direction of

the discharge opening. Never allow

discharge opening to point towards any

bystanders, pets, or valuable proper.

Wind can also change discharge

direction, so be aware.

DANGER! There are rotating blades

inside the blower which can cause

serious injury. Please keep your hands,

feet, or tools out of the intake and

discharge opening while the machine is

running.

WARNING! Never operate the

machine without directional discharge

opening and impeller guard properly

axed to the machine. These devices

shield the operator from accidental

contact with the rotating impeller.

DANGER! Exercise extreme caution

when operating on or crossing gravel

driveways, walks, or roads. Stay alert

for hidden hazards.

WARNING! Never leave the operating

position when the motor and baery

are running. Always shut down the

machine and ensure it cools completely

before leaving the operational area.

CAUTION! To reduce exposure to

vibration, limit the hours of operation

and take periodic breaks to minimize

repetition and rest your hands. Reduce

the speed and force in which you do

the repetitive movement.

ENGLISH

v.230906 | 13

GETTING TO KNOW YOUR MACHINE

A Handle

B Baery

C Baery & Motor Shroud

D Motor

E Housing

F Front wheel assembly

G Rear wheel assembly

H Adjustable deﬂector

I Base

J Axle

ENGLISH

SECTION II • ASSEMBLY

v.230906 | 15

STEP 1: FRONT WHEEL RACK ASSEMBLY

1. Insert the rotating sha of the wheel rack (3) into the sleeve of the support frame (5).

2. Secure with M8x45 ﬂange bolt and M8 ﬂange nut (6) to complete the front wheel assembly (F)

ENGLISH

16 | OPB480EV man.

STEP 2: WHEEL RACK INSTALLATION

Fix the front wheel assembly (F) to the housing (E) using an M8 hex nut (4).

ENGLISH

v.230906 | 17

STEP 3: REAR WHEEL INSTALLATION

Install the 10” rear wheels (31) on both sides of the axle (J) and secure using the provided R-pin (32).

ENGLISH

18 | OPB480EV man.

1. Secure the top handle (34) to the boom handle (33) using M8x45 hex bolts (6) and M8 hex nuts

(4).

2. Secure the assembled handle to the machine using M8x45 hex bolts (6) and M8 hex nuts (4).

ENGLISH

SECTION III • OPERATION

20 | OPB480EV man.

STARTING THE MACHINE

1. Press the power buon on the baery to turn on the power supply (FIG. 1).

2. Turn the switch key on the side of the baery and motor shroud (FIG. 2).

NOTE: Baery power level is shown on the baery, periodically check your baery power level.

FIG. 1

FIG. 2

STOPPING THE MACHINE

1. Turn the switch key on the side of the baery and motor shroud to stop the motor (FIG. 3).

2. Press the power buon on the baery to turn o the power supply (FIG. 4).

The machine will stop completely.

FIG. 3

FIG. 4

ENGLISH

La page charge ...

DK2 OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower Manuel utilisateur

Marque: DK2

Modèle: OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: DK2 OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower User manual

DK2 OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower Manuel utilisateur

DK2 OPB480EV 57.6V Battery Powered Walk Behind Leaf Blower Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents