Greenworks 82V Snow thrower Le manuel du propriétaire

Marque: Greenworks

Modèle: 82V Snow thrower

Catégorie: Outils électroportatifs

Taper: Le manuel du propriétaire

Ce manuel convient également à

GN 220

82 V CORDLESS SNOW THROWER

GN 220

Read all safety rules and instructions carefully before operating this tool.

Owner’s Manual

TOLL-FREE HELPLINE: 1 (855) 470-4267

www.greenworkscommercial.com

Contents ...............................................................................................................................2

Product Specications ..........................................................................................................2

Important Safety Instructions ................................................................................................3

Symbols ................................................................................................................................7

Know Your Snow Thrower .....................................................................................................9

Assembly Instruction ..........................................................................................................10

Operation Instruction ..........................................................................................................16

Maintenance .......................................................................................................................20

Environmentally Safe Battery Disposal ...............................................................................25

Troubleshooting ..................................................................................................................26

Limited Warranty .................................................................................................................27

Exploded View ....................................................................................................................29

Parts List.............................................................................................................................30

PRODUCT SPECIFICATIONS

82 V CORDLESS SNOW THROWER

Battery type ..................................................................................................82 V Lithium-ion

No-load speed ......................................................................................................1,900 RPM

Working width ................................................................................................................22 in.

Clearing depth ...............................................................................................................13 in.

Impeller size ..................................................................................................................18 in.

Wheels ............................................................................................................................. 7 in.

Weight (without battery) .............................................................................................24.17 kg

Discharge distance ...........................................................................................................6 m

CONTENTS

Cold Weather Operation: Lithium Ion batteries can be safely used from temperatures ranging

from -17 degrees to 45 degrees Celsius. NOTE: Do not store or charge battery outside. Battery

must be charged and stored indoors prior to use of the snow thrower.

Battery may not properly start if its temperatures is -17˚C or lower. If unit does not start remove

battery from snow thrower. Bring battery and charger in to a warm temperature area. Place

battery on charger and allow to charge for 10 minutes to allow the battery to warm up. Once

the charger light ashes green, the battery can be removed from the charger and installed in

Snowthrower for use.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Read all safety warnings and all instructions. Failure to follow all instructions listed below may

result in electric shock, re, and/or serious personal injury.

Save all warnings and instructions for future reference.

The term “power tool” in all of the warnings listed below refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

• Read the operator’s manual carefully. Be thoroughly familiar with the controls and the

proper use of the equipment.

• When servicing use only identical replacement parts. Replace or repair damaged cord.

• Walk. Do not run.

• Verify that the power tool is not in contact with anything before turning it on.

• Stay away from impeller openings at all times. Keep face, hands, and feet away from

concealed, moving, or rotating parts.

• Be attentive when using the power tool, and stay alert for holes in the terrain and

other hidden hazards or trafc.

• Turn the power tool off and remove battery from the tool when not in use, before

servicing, when changing accessories, and the like.

• Do not operate the power tool if the guards, plates, and other safety protective

devices are not in place.

• Do not operate the power tool near glass enclosures, automobiles, trucks, window

wells, drop-offs, etc. without properly adjusting the angle of the snow discharge.

Keep children and pets away from the work area.

• Use the power tool in daylight or in good articial light. If using at night, turn on the LED

lights and be aware of your surroundings.

• Avoid Accidental Starting - Don’t carry the power tool with nger on switch. Be sure

switch is off when inserting battery.

• Use this power tool only for the purposes it was designed.

• Hold the power tool with both hands while it is in use. Keep a rm grip on the handles.

• Keep the impeller clear of debris.

• After striking a foreign object, turn the power tool off and remove the battery pack,

and then inspect it for damage. Repair any damage before restarting and using the power

tool.

• If the power tool starts to vibrate abnormally, stop the power tool immediately and

attempt to determine the cause. Vibration is generally an indication of danger.

• Stop the motor and remove the battery pack whenever the operator is not in the

operating position, before unclogging the impeller, and before making any repairs,

adjustments, or inspections.

• Do not use on graveled surface unless the power tool is adjusted for such a surface

in accordance with the operator’s manual.

• Keep Children Away– All visitors should be kept a safe distance from work area.

IMPORTANT SAFETY INSTRUCTIONS

• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving

parts.

• Wear rubber boots when operating the power tool. Do not operate the equipment when

barefoot or wearing open sandals. Always wear substantial footwear.

• Operation of the power tool in the hand-held position is unsafe, except in accordance

with the special instructions for such use provided in the operator’s manual.

• Keep guards in place and in working order.

• Don’t Force Power tool – It will perform better and safer at the rate for which it was

designed.

• Don’t Overreach – Keep proper footing and balance at all times.

• If the power tool strikes a foreign object, follow these steps:

i) Stop the power tool. Release the switch, remove the battery.

ii) Inspect for damage.

iii) Repair any damage before restarting and operating the power tool.

• Store Idle Power tool Indoors – When not in use, power tools should be stored

indoors in dry, locked-up place – out of reach of children.

• Maintain Power tools With Care – Follow instructions for lubricating and changing

accessories.

• Allow the power tool to run for a few minutes after clearing snow in order to prevent

moving parts from freezing.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

battery pack, picking up or carrying the appliance. Carrying the appliance with your nger on

the switch or energizing appliance that have the switch on invites accidents.

• Disconnect the battery pack from the appliance before making any adjustments,

changing accessories, or storing appliance. Such preventive safety measures reduce the

risk of starting the appliance accidentally.

• Recharge only with the charger specied by the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of re when used with another battery pack.

• Use appliances only with specically designated battery packs. Use of any other

battery packs may create a risk of injury and re.

• When battery pack is not in use, keep it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the battery terminals together may

cause burns or a re.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact.

If contact accidentally occurs, ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or appliance that is damaged or modied. Damaged or

modied batteries may exhibit unpredictable behavior resulting in re explosion or risk of

injury.

• Do not expose a battery pack or appliance to re or excessive temperature. Exposure

to re or temperature above 130°C may cause explosion.

• Follow all charging instructions and do not charge the battery pack or appliance

outside of the temperature range specied in the instructions. Charging improperly or

at temperatures outside of the specied range may damage the battery and increase the risk

of re.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

• Have servicing performed by a qualied repair person using only identical

replacement parts. This will ensure that the safety of the product is maintained.

• Do not modify or attempt to repair the appliance or the battery pack (as applicable)

except as indicated in the instructions for use and care.

• Use only with Greenworks batteries: GL 500

• Use only with Greenworks Chargers: GC 400

GENERAL SAFETY RULES

• Verify that the power tool is secure while transporting.

• Store the power tool in a dry area that will prevent unauthorized use or damage. Keep

out of the reach of children.

• Keep handles dry, clean, and free of debris. Clean the power tool after each use. Refer to

the Maintenance Section in this manual for more information.

• If the labels on the power tool become defaced or start to lift off, contact customer

service at 1 (855) 470-4267.

• Keep these instructions in a safe place for future reference. Refer to them often, and use

them to instruct other users. Anyone who uses this power tool must read these instructions

carefully.

• Maintain the power tool with care. Follow the instructions for lubricating and changing

accessories.

WARNING

Use only Greenworks approved replacement batteries, other batteries may cause injury or damage

to the snow thrower.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

The recommended ambient temperature range:

Item Temperature

Snow Thrower Storage Temperature Range -4 ˚F (-20 ˚C) ~ 158 ˚F (70 ˚C)

Snow Thrower Operation Temperature Range 1.4 ˚F (-17 ˚C) ~ 104 ˚F (40 ˚C)

Battery Charging Temperature Range 39˚F (4°C) ~ 104 ˚F (40 ˚C)

Charger Operation Temperature Range 39˚F (4°C) ~ 113 ˚F (45 ˚C)

WARNING(PROPOSITION65)

Using this product will expose you to a chemical known to the State of California to cause cancer.

Using this product will expose you to a chemical known to the State of California to cause birth

defects or other reproductive harm.

Some dust created by power sanding, sawing, grinding, drilling and other construction activities

contains chemicals known to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically-treated lumber.

Your risk of exposure to these chemicals varies depending on how often you do this type of

work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with

approved safety equipment, such as dust masks that are specially designed to lter out microscopic

particles.

Some of the following symbols may be used on this product. Please study them and learn their

meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS

SYMBOL DESIGNATION/EXPLANATION

VVoltage

ACurrent

Hz Frequency (cycles per second)

Wh Watt Hour - Energy Storage Capacity

Ah Amp Hour - Current Capacity

DC Direct current

Type or a characteristic of current

RPM Revolutions per minute

/min Revolutions, strokes, surface speed, orbits etc., per minute

Double-insulated construction

Indicates a potential personal injury hazard.

To reduce the risk of injury user must read and understand operator’s manual

before using this product.

Always wear safety glasses with side shields that are marked to comply with

ANSI Z87.1.

Wear eye and hearing protection.

STOP

Stop the motor and remove the battery before leaving the machine.

Thrown objects can ricochet and result in personal injury or property damage.

Keep feet out of impeller. Keep feet away from rotating impeller.

Keep bystanders a safe distance from the machine.

Stay away from moving parts. Keep all guards and shields in place.

Keep hands and feet away.

DANGER — keep hands away from the impeller. Do not use hands to unclog

the chute.

The following signal words and meanings are intended to explain the levels of risk associated

with this product.

SYMBOLS

SAVE THESE INSTRUCTIONS

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualied

service technician. For service we suggest you return the product to your nearest AUTHORIZED

SERVICE CENTER for repair. When servicing, use only identical replacement parts.

WARNING

To avoid serious personal injury, do not attempt to use this product until you have read this

Owner's Manual thoroughly and understand it completely. If you do not understand the warnings

and instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline

(1 (855) 470-4267) for assistance.

WARNING

The operation of any power tool can result in foreign objects being thrown into your

eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shields and, when needed, a

full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or

standard safety glasses with side shields. Always use eye protection which is marked

to comply with ANSI Z87.1.

SYMBOL SIGNAL MEANING

DANGER Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING Indicates a potentially hazardous situation, which, if not

avoided, could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation, which, if not

avoided, may result in minor or moderate injury.

CAUTION (Without Safety Alert Symbol) Indicates a situation that may

result in property damage.

KNOW YOUR SNOW THROWER

Fig. 1

Read this operator's manual and safety rules before operating your snow thrower. Compare

the illustration in Fig. 1 to your snow thrower in order to familiarize yourself with the location of

various controls and adjustments. Save this manual for future reference.

Battery cover

Chute-deector handle

Wheel

Handle bar

Bail lever

Impeller

Scraper

Chute deector

Quick-release

Lever

Safety switch

button

Chute-rotation handle

LED

headlights

Side rail

Rear handle

ASSEMBLY INSTRUCTION

PART NAME FIGURE QTY.

Snow thrower 1

Chute deector 1

Chute-rotation handle 1

Chute-rotation box screws 2

Chute-rotation box screw

nuts 2

Discharge chute screws 3

Owner's Manual 1

PACKING LIST

UNPACKING

• Carefully remove the product and any accessories from the box. Make sure that all items

listed in the packing list are included.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily

operated the product.

• If any parts are damaged or missing, please call 1 (855) 470-4267 for assistance.

WARNING

If any parts are damaged or missing, do not operate this product until the parts are replaced.

Failure to heed this warning could result in serious personal injury.

WARNING

Do not install the battery until assembly is complete. Failure to comply could result in accidental

starting and possible serious personal injury.

WARNING

Do not attempt to modify this product or create accessories not recommended for use with this

product. Any such alteration or modication is misuse, and could result in a hazardous condition

leading to possible serious personal injury.

WARNING

Do not allow familiarity with this product to make you careless. Remember that a careless

fraction of a second is sufcient to inict serious injury.

WARNING

Do not use any attachments or accessories not recommended by the manufacturer of this product.

The use of attachments or accessories not recommended can result in serious personal injury.

ASSEMBLY INSTRUCTION

UNFOLDING/FOLDING THE SIDE RAILS (See Figure 2)

NOTE: Do not attempt to start the snow thrower when the side rails are folded down.

• Your snow thrower is shipped with the side rails (1) in the compact, locked position.

• Open the quick-release levers (2) on both sides and gently pivot the side rails upwards until

they come to a stop.

• Close the quick-release levers and then tighten the knobs (3) to secure the side rails in place.

• To fold the side rails, open the quick-release levers so that you can store the machine when

not in use.

Fig. 2

ASSEMBLY INSTRUCTION

INSTALLING THE CHUTE-ROTATION BOX (See Figure 3)

• Align the holes in the panel of the chute-rotation box (1) and the switch box (2).

• Put the chute-rotation box screws (3) through the holes.

• Tighten the chute-rotation box screw nuts (4) with a wrench (not included).

Fig. 3

124

INSTALLING THE CHUTE (See Figure 4)

• Align the grooves of the discharge chute (1) with the slot on the chute housing.

• Push the discharge chute into position.

• Tighten the discharge chute screws (2) with a Phillips head screw driver to lock the discharge

chute.

NOTE: Never operate the snow thrower without the complete discharge chute in place.

Fig. 4

ASSEMBLY INSTRUCTION

Groove of the

chute Slot on the chute

housing

TO INSTALL BATTERY PACK (See Figure 5)

• Open the battery compartment cover (1).

• Alight the battery (2) with the cavity in the snow thrower housing on the right side of the unit. (If

standing behind the handles)

• Insert the battery into the right battery compartment to start the snow thrower. This snow

thrower is equipped with a battery storage compartment to store an extra battery pack.

• Slide the battery down to lock it into position. The battery is fully inserted into the snow

thrower when you hear an audible “click”.

• Close the battery compartment cover.

Fig. 5

TO REMOVE BATTERY PACK (See Figure 5)

• Ensure that the impeller has come to a complete stop.

• Release your grip on the bail lever to stop the snow thrower.

• Press the battery release button (3). This will cause the battery to raise out of the tool slightly.

• Remove the battery pack from the snow thrower.

ASSEMBLY INSTRUCTION

OPERATION INSTRUCTION

POWERING ON AND OFF (See Figure 6)

• To power on, rst press the safety switch button (1).

• While pressing the safety switch button with one hand, use your other hand to simultaneously

pull the bail lever (2) toward you. Once the machine powers on, release the safety switch

button and proceed with operation. The snow thrower can only be started by pressing the

safety switch button rst, followed by squeezing the bail lever; reverse operation will not start

the machine.

• To power off, release your grip on the bail lever.

Fig. 6

CAUTION

Do not attempt to override the operation of the safety switch button or bar lever.

WARNING

The operation of any snow thrower can result in foreign objects being thrown into the eyes, which

can cause severe eye damage. Always wear safety glasses while operating the snow thrower

and while performing any adjustments or repairs.

WARNING

Keep bystanders a safe distance from the machine.

INSPECT THE CLEARING AREA. Remove all stones, sticks, wire, bones, and other debris that

might be thrown by the rotating impeller.

ADJUSTING THE CHUTE (See Figure 7)

You can adjust the discharge chute (1) 180° to change the snow direction.

• Push the chute-rotation handle (2) forward to move the discharge chute to the left.

• Pull the chute-rotation handle (2) rearward to move the discharge chute to the right.

Fig. 7

OPERATION INSTRUCTION

You can adjust the chute deector (3) up and down to change the throwing distance of

the snow.

• Push and hold the trigger (4) on the chute deector.

• Move the chute deector up to increase the snow distance.

• Move the chute deector down to decrease the snow distance.

WARNING

Do not force the chute so far forward that a gap appears between the deector and the chute

itself. Snow or other debris could be thrown through the gap and back at the operator, resulting

in serious personal injury.

WARNING

Do not adjust the chute deector while the bail lever is engaged. Always release the bail lever

before adjusting the chute deector.

OPERATION INSTRUCTION

LED HEADLIGHTS (See Figure 8)

Set the headlights (1) on:

• Push and hold the safety switch button (2).

• Pull the bail lever (3) in the direction of the handle bar to turn the headlights on.

• Release the safety switch button.

Set the headlights off:

• Release the bail lever.

Fig. 8

OPERATING TIPS

WARNING

If the Snow Thrower hits a foreign object while it is in use, the object could be thrown in the

direction of the operator or a bystander. Thrown objects could cause serious personal injury.

Keep the area to be cleared free of all foreign objects that may be picked up and thrown by the

impeller.

• Keep the area of operation free of foreign objects that can become thrown by the impeller.

Perform a thorough inspection of the area since some objects may be hidden from view by

surrounding snow. lf the snow thrower hits an obstruction or picks up a foreign object during

use, stop the snow thrower, remove the battery, remove the obstruction, and inspect the unit

for damage. Repair or replace any damaged part before restarting and operating the unit.

• Keep children, pets, and bystanders away from the area of operation. Be aware that the

normal noise of the machine when turned on may make it difcult for you to hear approaching

people.

• When moving the snow thrower, use the wheels on one side as the pivot point. Slightly tilt the

snow thrower on this pivot point to move it forward or backward.

• Start your clearing path outward, throwing snow in a back and forth motion. To clear in the

opposite direction, pivot the snow thrower on its wheels. Make sure to overlap clearing paths.

• Note the wind direction. If possible, move in the same direction as the wind so that the snow

is not thrown against the wind (and thus back onto you and on the just cleared path).

• Do not push the snow thrower with excessive force. You should push the machine gently and

at a consistent speed in accordance with the unit's throw rate.

• Some parts of the snow thrower may freeze under extreme temperature conditions. Do not

attempt to operate the snow thrower with frozen parts. If the parts freeze while the snow

thrower is in use, stop the snow thrower, remove the battery, and inspect for frozen parts. Free

all parts before restarting or operating the snow thrower. Never force controls that are frozen.

• When working on pebbles, gravel, or unpaved surfaces, avoid throwing loose surface material

along with the snow by pushing down on the handle to raise the scraper at the base of the unit

above the pebbles or gravel.

• Cold Weather Operation: Lithium Ion batteries can be safely used from temperatures ranging

from -17 degrees to 45 degrees Celsius. NOTE: Do not store or charge battery outside.

Battery must be charged and stored indoors prior to use of the snow thrower.

• If the Snow thrower does not start initially remove battery from snow thrower. Place battery on

charger and allow to charge for 10 minutes. Remove from charger and install in Snowthrower

for use. The start-up issue may be caused from the battery being too cold. To avoid this issue,

ensure battery is stored in a dry cool place for storage and charging and leave indoors until

ready for use.

OPERATION INSTRUCTION

La page charge ...

Greenworks 82V Snow thrower Le manuel du propriétaire

Marque: Greenworks

Modèle: 82V Snow thrower

Catégorie: Outils électroportatifs

Taper: Le manuel du propriétaire

Ce manuel convient également à

GN 220

Télécharger le PDF

rapport

dans d''autres langues

English: Greenworks 82V Snow thrower Owner's manual
español: Greenworks 82V Snow thrower El manual del propietario

Documents connexes

Greenworks 40V Snow Thrower Le manuel du propriétaire

Greenworks 82V Snow thrower Le manuel du propriétaire

Ce manuel convient également à

Greenworks 82V Snow thrower Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents