Yamaha PSR-SX700 Manuel utilisateur

EN

This Reference Manual explains advanced features of the PSR-SX900/SX700.

Please read the Owner’s Manual first, before reading this Reference Manual.

Reference Manual

Digital Workstation

2 PSR-SX900/SX700 Reference Manual

Contents

Function List 4

1 Styles 6

Style Types (Characteristics) ............................................................................................................................6

Registering Files to the Favorite Tab ................................................................................................................7

Changing the Chord Fingering Type .................................................................................................................8

Chord Types Recognized in the Fingered Mode...............................................................................................9

Using the Chord Tutor Function ......................................................................................................................10

Turning Each Channel of the Style On/Off ......................................................................................................11

Style Playback Related Settings .....................................................................................................................12

Adjusting the Tempo .......................................................................................................................................13

Recording a Chord Sequence when Style Playback is stopped (Chord Looper) (PSR-SX900) .....................14

Saving and Calling up Your Custom Chord Sequences (Chord Looper) (PSR-SX900) .................................15

Creating/Editing Styles (Style Creator)............................................................................................................18

2 Voices 32

Voice Part Setup Display.................................................................................................................................32

Voice Selection Display-related Settings.........................................................................................................34

Voice Types (Characteristics) .........................................................................................................................35

Registering Files to the Favorite Tab ..............................................................................................................36

Metronome Settings ........................................................................................................................................36

Keyboard/Joystick-related Settings .................................................................................................................37

Keyboard Part-related Settings (Voice Setting)...............................................................................................39

Transposing the Pitch in Semitones................................................................................................................40

Fine Tuning the Pitch of the Entire Instrument (Master Tune) ........................................................................41

Selecting or Creating a Temperament (Scale Tune).......................................................................................41

Making Detailed Settings for Harmony/Arpeggio ............................................................................................44

Editing Voices (Voice Edit) ..............................................................................................................................46

Editing Organ Flutes Voices (Voice Edit) ........................................................................................................50

3 Multi Pads 52

Creating a Multi Pad via MIDI (Multi Pad Creator—MIDI Multi Pad Recording)..............................................52

Creating a Multi Pad with Audio files (Multi Pad Creator—Audio Link Multi Pad) ...........................................54

Editing Multi Pads............................................................................................................................................56

4 Song Playback 57

Creating a Song List for Playback ...................................................................................................................57

Using Repeat Playback Mode .........................................................................................................................58

Editing Music Notation (Score) Settings..........................................................................................................59

Displaying Lyrics and Setting Up the Display..................................................................................................61

Displaying Text and Setting Up the Display ....................................................................................................62

Using the Auto Accompaniment Features with MIDI Song Playback..............................................................63

Turning Each Channel of a MIDI Song On/Off ................................................................................................64

Song Playback Related Settings .....................................................................................................................65

5 MIDI Song Recording/Editing 67

Overview of MIDI Song Recording ..................................................................................................................67

Recording Each Channel Individually (Realtime Recording)...........................................................................69

Re-recording a Specific Section—Punch In/Out (Realtime Recording) ..........................................................71

Recording Panel Setups to a Song .................................................................................................................73

Editing Channel Events of Existing Song Data ...............................................................................................74

Step Recording/Editing Songs (Step Edit) ......................................................................................................77

6 Registration Memory 86

Disabling Recall of Specific Items (Registration Freeze) ................................................................................86

Calling Up Registration Memory Numbers in Order (Registration Sequence) ................................................87

Searching for a Registration Memory Bank File..............................................................................................89

7 Playlist 91

Importing Music Finder Records to the Playlist ...............................................................................................91

8 Microphone 93

Making the Microphone or Guitar Settings (Mic Setting).................................................................................93

Editing the Vocal Harmony Type (Vocal Harmony) (PSR-SX900) ..................................................................96

Editing the Synth Vocoder Types (Vocal Harmony) (PSR-SX900) ...............................................................100

Contents

PSR-SX900/SX700 Reference Manual 3

9 Mixer 102

Editing Filter Parameters (Filter) ...................................................................................................................102

Editing EQ Parameters (EQ) .........................................................................................................................103

Editing Effect Parameters (Effect) .................................................................................................................105

Editing Effect Parameters (Chorus/Reverb) ..................................................................................................107

Editing Pan/Volume Settings (Pan/Volume)..................................................................................................107

Editing Master Compressor Settings (Compressor)......................................................................................108

Block Diagram ...............................................................................................................................................110

10 Controller Function Settings 111

Assigning Specific Functions to the Pedals and Panel Buttons (Assignable) ...............................................111

Editing the Assign Types of the Live Control Knobs (Live Control)...............................................................117

11 MIDI Settings 120

Basic Procedure for MIDI Settings ................................................................................................................120

System—MIDI System Settings ....................................................................................................................122

Transmit—MIDI Transmit Channel Settings..................................................................................................123

Receive—MIDI Receive Channel Settings....................................................................................................124

On Bass Note—Setting the Bass Note for Style Playback via MIDI..............................................................125

Chord Detect—Settings for Chords used in Style Playback via MIDI ...........................................................125

12 Network Settings 126

Wireless LAN Settings...................................................................................................................................126

Making the Time Settings..............................................................................................................................128

13 Utility 129

Speaker/Connectivity (PSR-SX900), Speaker (PSR-SX700) .......................................................................129

Touch Screen/Display ...................................................................................................................................130

Parameter Lock .............................................................................................................................................130

Storage—Formatting the Drive......................................................................................................................130

System ..........................................................................................................................................................131

Factory Reset/Backup ...................................................................................................................................132

14 Expansion Pack Related Operations 134

Installing Expansion Pack Data from a USB Flash Drive ..............................................................................134

Saving the Instrument Info File to a USB Flash Drive ...................................................................................135

Restoring the Pre-installed Expansion Contents...........................................................................................135

15 Connections 136

Selecting the Output Destination of Each Sound (Line Out) (PSR-SX900) ..................................................136

Index 138

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different

from those on your instrument. Note that all display examples shown in this manual are in English.

• Even though the example screens and illustrations pertain to the PSR-SX900, the usage is the same for the PSR-SX700.

• The displays are taken from the PSR-SX900, and are in English.

• The “Data List” and “Smart Device Connection Manual for iOS (iPhone/iPad Connection Manual)” documents can be downloaded

from the Yamaha website:

https://download.yamaha.com

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Using the PDF manual

• To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left of

the main display window. (Click the “Bookmarks” tab to open the index if it is not displayed.)

• Click the page numbers that appear in this manual to go directly to the corresponding page.

• Select “Find” or “Search” from the Adobe Reader “Edit” menu and enter a keyword to locate related information in

the document. The names and positions of menu items may vary according to the version of Adobe Reader being

used.

The names and positions of menu items may vary according to the version of Adobe Reader being used.

NOTE

4 PSR-SX900/SX700 Reference Manual

Function List

This section simply and very briefly explains what you can do in the displays called up by pressing the buttons

on the panel, or by touching each icon on the Menu display.

For more information, refer to the page indicated below or the Owner’s Manual. The “” mark indicates that the

function is described in the Owner’s Manual.

Displays accessible by the panel buttons

Menu display functions

Display Button to access Description Pages

Owner’s

Manual

Home

[DIRECT ACCESS] +

[EXIT]

Portal of the instrument’s display structure, which provides at-a-

glance information on all current settings.

- 

Menu [MENU]

By touching each of the icons, you can call up the menus for the

various functions listed below.

- 

Style Selection

STYLE category selection

buttons

For selecting Style files. - 

Song Player SONG [PLAYER] For controlling Song playback. 57 

Playlist [PLAYLIST] For selecting and editing Playlists, and managing your repertoire. 91 

Song Recording SONG [RECORDING] For recording your performance. 68 

Mixer [MIXER/EQ]

For adjusting the parameters of each part, such as volume, pan,

and EQ. It also allows you to adjust overall sound controls, such as

Master Compressor and Master EQ.

102 

Voice Selection

PART SELECT [LEFT]–

[RIGHT 3], VOICE

category selection buttons

For assigning Voices to each of the keyboard parts. - 

Multi Pad

Selection

MULTI PAD CONTROL

[SELECT]

For selecting Multi Pads. 56 

Registration

Memory Bank

Selection

REGIST BANK SELECT

[-] and [+]

For selecting Registration Memory Banks. 87 

Registration

Memory window

[MEMORY] For registering the current panel settings. - 

Menu Description Pages

Owner’s

Manual

Channel On/Off For turning each channel of Style or MIDI Song on and off. 11, 64 -

Voice Part Setup

For confirming the current Voice settings, and making Voice-related settings such

as Effects.

32 -

Line Out (PSR-SX900)

Determines which jack is used to output each part and each drum & percussion

instrument.

136 -

Score For displaying the music notation (score) of the current MIDI Song. 59 

Lyrics For displaying the lyrics of the current Song. 61 

Text Viewer For displaying text files created on your computer. 62 -

Chord Looper (PSR-SX900) For recording a sequence of the chords and playing it back in a loop. 14, 15 

Mic Setting For making microphone sound settings. 93 

Vocal Harmony (PSR-SX900)

For adding Vocal Harmony effects to your singing. You can edit the Vocal

Harmony and save as your original harmony.

96, 100 

Kbd Harmony/Arp

For adding the Harmony/Arpeggio effect to the right-hand section of the keyboard.

Parameters such as Harmony/Arpeggio type can be set.

44 

Split & Fingering

For setting the Split Point or change the Chord Fingering type and Chord

Detection area.

8 

Regist Sequence

Determines the order for calling up Registration Memory settings when using the

pedal.

87 -

Regist Freeze

Determines the item(s) that remain unchanged even when you call up panel

setups from the Registration Memory.

86 -

Tempo

For adjusting the tempo of MIDI Song, Style or Metronome. The same operation

as using the TEMPO [-]/[+] and [RESET/TAP TEMPO] buttons can be done on the

display.

13 

PSR-SX900/SX700 Reference Manual 5

*1

This icon appears only when the Bluetooth function is included.

*2

This icon appears only when the optional USB Wireless LAN adaptor is connected.

Metronome For making settings of the metronome and the [RESET/TAP TEMPO] button. 36 

Live Control Determines the functions assigned to the Live Control knobs. 117 

Assignable

Determines the functions assigned to the pedals, assignable buttons, and the

shortcuts on the Home display.

111 

Panel Lock

For locking the panel settings. When the panel settings are locked, the instrument

cannot be operated.

- 

Demo For calling up the Demo display. - 

Voice Edit

For editing the preset Voices to create your own Voices. The display differs

depending on whether an Organ Flutes Voice or another kind of Voice is selected.

46, 50 -

Style Creator

For creating a Style by editing the preset Style, or by recording Style channels

one by one.

18 -

Song Recording

For recording your performance. (This is same as the [RECORDING] button on

the panel.)

67 

M.Pad Creator

For creating a Multi Pad by editing an existing preset Multi Pad, or by recording a

new one.

52, 54 -

Voice Setting

For making detailed settings of the keyboard parts, such as the pitch for each

part, Voice Set filter, and Arpeggio related settings.

39 -

Style Setting

For making Style playback related settings such as OTS Link timing, Dynamics

Control, etc.

12 -

Song Setting

For making Song playback related settings such as Guide function, Channel

settings, etc.

65 -

Chord Tutor Indicates how to play chords that correspond to the specified chord names. 10 -

Scale Tune For setting the scale type. 41 -

Master Tune For fine-tuning the pitch of the entire instrument. 41 -

Transpose

For transposing the pitch of the entire sound in semitones, or just the sound of the

keyboard or MIDI Song.

40 

Keyboard/Joystick Determines the Touch Response of the keyboard and Joystick-related settings. 37 -

Expansion

For installing Expansion Packs for adding extra contents downloaded from the

website or created on your own by using the Yamaha Expansion Manager, or

restoring the pre-installed Expansion Contents.

134 -

MIDI For making MIDI-related settings. 120 -

Utility

For making global settings, managing the USB flash drives, initializing the

instrument to the factory default, or backing up the data stored in the instrument,

etc.

12

9 

Bluet

ooth

*1

(PSR-SX900) For making settings for connecting the instrument to a Bluetooth-equipped device. - 

Time

*2

For making settings of the time shown on the Home display. 128 -

Wireless LAN

*2

For making settings for connecting the instrument to a computer or a smart device

such as iPad via the wireless LAN function.

126 -

Menu Description Pages

Owner’s

Manual

6 PSR-SX900/SX700 Reference Manual

1

Styles

Contents

Style Types (Characteristics) ...............................................................................................................................6

Registering Files to the Favorite Tab...................................................................................................................7

• Removing Files from the Favorite Tab ............................................................................................................7

Changing the Chord Fingering Type ..................................................................................................................8

Chord Types Recognized in the Fingered Mode ................................................................................................9

Using the Chord Tutor Function .......................................................................................................................10

Turning Each Channel of the Style On/Off ......................................................................................................11

Style Playback Related Settings.........................................................................................................................12

• Setting............................................................................................................................................................12

• Change Behavior ...........................................................................................................................................13

Adjusting the Tempo...........................................................................................................................................13

Recording a Chord Sequence when Style Playback is stopped (Chord Looper) (PSR-SX900) ..................14

Saving and Calling up Your Custom Chord Sequences (Chord Looper) (PSR-SX900) ..............................15

• Memorizing the Recorded Chord Looper Data .............................................................................................15

• Saving the Recorded Data as a Bank File......................................................................................................16

• Recalling the Chord Looper Bank File and Playing Back a Style with a Chord Sequence ..........................16

• Editing the Chord Looper Bank (Export, Import, Clear) ..............................................................................17

Creating/Editing Styles (Style Creator) ............................................................................................................18

• Style Data Structure—Consisting of Source Patterns ...................................................................................18

• Basic Procedure for Creating a Style.............................................................................................................19

• Realtime Recording .......................................................................................................................................20

• Step Recording ..............................................................................................................................................23

• Assembly—Assigning the Source Pattern to Each Channel .........................................................................24

• Channel Edit ..................................................................................................................................................24

• SFF Edit—Making Style File Format Settings..............................................................................................26

• Editing the Rhythm Part of a Style (Drum Setup).........................................................................................30

The particular type of Style is indicated the upper left of the Style name in the

Style Selection display. The defining characteristics of these Styles and their

performance advantages are described below.

Style Types (Characteristics)

Session For information on these types, refer to “Style Characteristics” in the Owner’s Manual.

Free Play

DJ

+Audio (PSR-SX900) The Audio Styles (+Audio) have been specially produced by adding audio recordings of studio

musicians playing in various recording studios worldwide. This adds exceptionally natural feel,

ambience and warmth to the drums and percussion of the Style, giving your performance greater

expressive potential. Specifically, it retains the subtle nuances and grooves that are difficult to

reproduce using the preset drum/percussion kit. Yamaha Time Stretch Technology allows the audio

to follow your tempo changes without changing pitch, so everything stays in perfect sync.

Audio Styles can be played back and controlled by this instrument; however, by default the data is

not included on this instrument. Audio Styles or Expansion Packs that contain Audio Styles may be

available at the Yamaha website.

• If the tempo is set to over 160% of the default, the audio part is muted.

• Keep in mind that the Audio Styles may take more time to load than others, and that they may have certain restrictions and

differ in the specific functions that can be handled.

NOTE

PSR-SX900/SX700 Reference Manual 7

1

Styles

You can call up your favorite or often used preset Styles or Voices quickly by registering them to the Favorite tab on

the File Selection display.

1 In the File Selection display, select the desired category in the Preset tab.

2 Touch (File) to call up the “File Edit” window.

3 Touch [Favorite] to call up the display for selecting the files.

4 Select the desired files for registering to the Favorite tab.

5 Touch [Favorite] to actually register the files to the Favorite tab.

The selected files are shown on the Favorite tab.

Removing Files from the Favorite Tab

1 In the Favorite tab of the File Selection display, touch (File) to call up the “File Edit”

window.

2 Touch [Favorite] to call up the display for selecting the files.

3 Select the files which you want to remove from the Favorite tab.

4 Touch [Clear] to actually remove the files from the Favorite tab.

Registering Files to the Favorite Tab

2

3

5

4

Favorite tab

4

3

8 PSR-SX900/SX700 Reference Manual

The Chord Fingering type determines how chords are specified for Style Playback. You can select the desired type on

the display called up via [MENU]  [Split & Fingering].

Changing the Chord Fingering Type

Single Finger Makes it simple to produce orchestrated accompaniment using major, seventh, minor and minor-

seventh chords by pressing only one, two or three keys on the Chord section of the keyboard.

Multi Finger Automatically detects Single Finger or Fingered chord fingerings, so you can use either type of fin-

gering without having to switch fingering types.

Fingered Lets you specify the chord by pressing the notes making up a chord in the left hand section of the

keyboard when ACMP is turned on or the Left part is turned on. For information on which notes to

press for each chord, refer to the Data List (Chord Types Recognized in the Fingered Mode) down-

loadable from Yamaha Manual Library, or use the Chord Tutor function as described in the next

section.

Fingered On Bass Accepts the same fingerings as Fingered; however, the lowest note played in the Chord section of

the keyboard is used as the bass note, allowing you to play “on bass” chords. (In the Fingered type,

the root of the chord is always used as the bass note.)

Full Keyboard Detects chords in the entire key range. Chords are detected in a way similar to Fingered, even if you

split the notes between your left and right hands—for example, playing a bass note with your left

hand and a chord with your right, or by playing a chord with your left hand and a melody note with

your right.

AI Fingered Basically the same as Fingered, with the exception that less than three notes can be played to indi-

cate the chords (based on the previously played chord, etc.).

AI Full Keyboard This type is similar to Full Keyboard, with the exception that less than three notes can be played to

indicate the chords (based on the previously played chord, etc.). 9th, 11th and 13th chords cannot

be played.

• “AI” stands for “Artificial Intelligence.”

• When the chord detection area is set to “Upper,” only “Fingered*” is available. This type is basically same as “Fingered,” except that “1+5,” “1+8” and Chord Cancel are

not available.

Cm

C

Cm

7

C

7

Major chord

Press the root key only.

Minor chord

Simultaneously press

the root key and a black

key to its left.

Seventh chord

Simultaneously press the

root key and a while key to

its left.

Minor Seventh chord

Simultaneously press the root

key and both a white and black

key to its left.

NOTE

PSR-SX900/SX700 Reference Manual 9

1

Styles

• Notes in parentheses can be omitted.

Chord Types Recognized in the Fingered Mode

Chord Name [Abbreviation] Normal Voicing Display for root “C”

1+8 1+8 C1+8

1+5 1+5 C1+5

Major [M] 1+3+5 C

Sixth [6] 1+(3)+5+6 C6

Major seventh [M7] 1+3+(5)+7 CM7

Major seventh flatted fifth [M7b5] 1+3+b5+7 CM7(b5)

Major seventh add sharp eleventh [M7(#11)] 1+(2)+3+#4+5+7 CM7(#11)

Add ninth [(9)] 1+2+3+5 Cadd9

Major seventh ninth [M7_9] 1+2+3+(5)+7 CM7(9)

Sixth ninth [6_9] 1+2+3+(5)+6 C6(9)

Flatted fifth [(b5)] 1+3+b5Cb5

Augmented [aug] 1+3+#5Caug

Seventh augmented [7aug] 1+3+#5+b7 C7aug

Major seventh augmented [M7aug] 1+(3)+#5+7 CM7aug

Minor [m] 1+b3+5 Cm

Minor sixth [m6] 1+b3+5+6 Cm6

Minor seventh [m7] 1+b3+(5)+b7Cm7

Minor seventh flatted fifth [m7b5] 1+b3+b5+b7Cm7(b5)

Minor add ninth [m(9)] 1+2+b3+5 Cm add9

Minor seventh ninth [m7(9)] 1+2+b3+(5)+b7 Cm7(9)

Minor seventh eleventh [m7(11)] 1+(2)+b3+4+5+(b7) Cm7(11)

Minor major seventh flatted fifth [mM7b5] 1+b3+b5+7 CmM7(b5)

Minor major seventh [mM7] 1+b3+(5)+7 CmM7

Minor major seventh ninth [mM7(9)] 1+2+b3+(5)+7 CmM7(9)

Diminished [dim] 1+b3+b5Cdim

Diminished seventh [dim7] 1+b3+b5+6 Cdim7

Seventh [7] 1+3+(5)+b7C7

Seventh suspended fourth [7sus4] 1+4+5+b7C7sus4

Seventh ninth [7(9)] 1+2+3+(5)+b7 C7(9)

Seventh add sharp eleventh [7(#11)] 1+(2)+3+#4+5+b7C7(#11)

Seventh add thirteenth [7(13)] 1+3+(5)+6+b7 C7(13)

Seventh flatted fifth [7b5] 1+3+b5+b7C7(b5)

Seventh flatted ninth [7(b9)] 1+b2+3+(5)+b7C7(b9)

Seventh add flatted thirteenth [7(b13)] 1+3+5+b6+b7C7(b13)

Seventh sharp ninth [7(#9)] 1+#2+3+(5)+b7C7(#9)

Suspended fourth [sus4] 1+4+5 Csus4

One plus two plus five [sus2] 1+2+5 Csus2

cancel 1+b2+2 Cancel

10 PSR-SX900/SX700 Reference Manual

The Chord Tutor function lets you can see which notes to press for specifying the chord. If you know a chord name but

don’t know how to play it, use this function.

This function can be used on the display called up via [MENU]  [Chord Tutor].

The notes you need to play are shown in the display.

Using the Chord Tutor Function

Root Lets you select the desired chord root.

Type Lets you select the desired chord type.

• Although this function shows how to play a chord only in case of “Fingered,” the indication is useful also when a type other than “Single Finger” is selected.

• Depending on the chord, some notes will be omitted.

NOTE

PSR-SX900/SX700 Reference Manual 11

1

Styles

You can add variations and change the feeling of a Style by selectively turning channels on/off as the Style plays.

Style channels can be turned on or off on the display called up via [MENU]  [Channel On/Off].

If you want to play back only one particular channel (solo playback), touch and hold the desired channel name until it

turns purple. To cancel solo, simply touch the (purple) channel name again.

Turning Each Channel of the Style On/Off

Style channels

Each Style contains the channels listed below.

• Rhythm 1/2: These are the basic parts of the Style, containing the drum and percussion rhythm patterns.

• Bass: The bass part uses various appropriate instrument sounds to match the Style.

• Chord 1/2: These parts are for rhythmic chord backing, commonly consisting of piano or guitar Voices.

• Pad: This part is used for sustained instruments such as strings, organ, choir, etc.

• Phrase 1/2: These parts are used for punchy brass stabs, arpeggiated chords, and other extras that make the accom-

paniment more interesting.

(PSR-SX900)

• Audio: This is an audio part of the Audio Style.

You can also turn the channels on/off on the Mixer display.

To change the Voice for each channel:

Touch the instrument icon below the desired channel to call up the Voice Selection display, then select the desired

Voice.

You can save the settings here to Registration Memory. For details, refer to the Owner’s Manual.

NOTE

(PSR-SX900) The Voice of the Audio part of the Audio Style cannot be changed.

NOTE

12 PSR-SX900/SX700 Reference Manual

You can make a variety of settings for Style Playback, on the display called up via [MENU]  [Style Setting].

Setting

Style Playback Related Settings

Dynamics Control This determines how the Style playback volume changes depending on the playing strength.

• Off: The volume is kept the same regardless of playing strength.

• Narrow: The volume changes over a narrow range.

• Medium: The volume changes over a medium range.

• Wide: The volume changes over a wide range.

Display Tempo Turns the tempo indication on or off for each Style on the Style Selection display.

Stop ACMP When the [ACMP] button is turned on and the [SYNC START] button is off, you can play chords in

the chord section of the keyboard with the Style stopped, and still hear the accompaniment chord.

In this condition—called “Stop Accompaniment”—any valid chord fingerings are recognized and

the chord root/type are shown in the Style area of the Home display. Here, you can determine

whether the chord played in the chord section will sound or not in the Stop Accompaniment status.

• Off: The chord played in the chord section will not sound.

• Style: The chord played in the chord section will sound via the Voices for the Pad channel and the

Bass channel of the selected Style.

• Fixed: The chord played in the chord section will sound via the specified Pad/Bass channels’

Voices, regardless of the selected Style.

OTS Link Timing This applies to the OTS Link function. This parameter determines the timing in which the One

Touch Settings change with the MAIN VARIATION [A]–[D] change. (The [OTS LINK] button

must be on.)

• Real Time: One Touch Setting is immediately called up when you press a MAIN VARIATION

button.

• Next Bar: One Touch Setting is called up at the next measure, after you press a MAIN VARIA-

TION button.

Synchro Stop Window This determines how long you can hold a chord before the Synchro Stop function is automatically

cancelled. When the [SYNC STOP] button is turned on and this is set to a value other than “Off,”

the Synchro Stop function is automatically cancelled if you hold a chord for longer than the time set

here. This conveniently resets Style playback control to normal, letting you release the keys and

still have the Style play. In other words, if you release the keys more quickly than the time set here,

the Synchro Stop function works.

When the selected Style contains MegaVoices, unexpected sounds may result when this is set to “Style.”

NOTE

When you record a Song, the chord detected by playing the Stop Accompaniment can be recorded regardless of the setting

here. Please note that both the sounding Voice and chord data is recorded when set to “Style,” and only the chord data is

recorded when set to “Off” or “Fixed.”

NOTE

PSR-SX900/SX700 Reference Manual 13

1

Styles

Change Behavior

You can adjust the tempo of Style, MIDI Song and metronome, on the display called up via [MENU]  [Tempo].

Multi Pad Synchro Stop

(Style Stop)

Determines whether or not the repeat playback of a Multi Pad stops when Style playback is

stopped.

Multi Pad Synchro Stop

(Style Ending)

Determines whether or not the repeat playback of a Multi Pad stops when the Ending section of

Style is played back.

Section Set Determines the default section that is automatically called up when selecting different Styles (when

Style playback is stopped). When set to “Off” and Style playback is stopped, the active section is

maintained even if a different Style is selected. When any of the MAIN A–D sections are not

included in the Style data, the nearest section is automatically selected. For example, when MAIN

D is not contained in the selected Style, MAIN C will be called up.

Tempo This determines whether the tempo changes or not when you change the Style.

• Lock: Regardless of playback status, the tempo setting of the previous Style is maintained.

• Hold: While the Style is playing back, the tempo setting of the previous Style is maintained.

While the Style is stopped, the tempo changes to that of the default tempo of the selected Style.

• Reset: Regardless of playback status, the tempo changes to that of the default tempo for the

selected Style.

Part On/Off This determines whether the Style Channel on/off status changes or not when you change the Style.

• Lock: Regardless of playback status, the Channel on/off status of the previous Style is main-

tained.

• Hold: While the Style is playing back, the Channel on/off status of the previous Style is main-

tained. While the Style is stopped, all Channels of the selected Style are set to on.

• Reset: Regardless of playback status, all Channels of the selected Style are set to on.

Adjusting the Tempo

q

Indicates the tempo value during playback of the metronome, Style and MIDI Song. The tempo can be changed by using

the Data dial, the [DEC]/[INC] buttons or the TEMPO [-]/[+] buttons.

w

Allows you to change the tempo by tapping this twice at the desired tempo. (Equivalent to the [RESET/TAP TEMPO] but-

ton when the “Style Section Reset” setting (page 36) is off.)

e

Indicates the tempo value of the current MIDI Song. The Song will be started at this tempo.

r

Indicates the tempo value of the current Style. The Style will be started at this tempo.

The tempo value of an Audio Song is set via the Time Stretch function. Refer to the Owner’s Manual.

w

q

e

r

(PSR-SX900) When you select an Audio Style (page 6), the upper limit of the tempo will be shown below the tempo value in this way: Audio: ** max. The

Audio part is muted if the tempo is over the upper limit.

NOTE

14 PSR-SX900/SX700 Reference Manual

You can start recording and playing back a chord sequence when Style playback is stopped, using SYNC START. By

recording this way, you can adjust the start timing to exactly the first beat of the measure.

1 While Style playback is stopped, press the CHORD LOOPER [REC/STOP] button.

The [REC/STOP] button flashes to indicate the Chord Looper function is on standby to record, and the STYLE

CONTROL [SYNC START] button is automatically turned on.

2 Enter the chords on the keyboard according to the playback tempo of the Style.

Recording and Style playback starts simultaneously. The chord sequence is recorded until you stop recording in

step 3.

3 Press the STYLE CONTROL [START/STOP] button to stop recording and Style playback.

Recording stops, and the CHORD LOOPER [ON/OFF] button lights in blue to indicate the data is already

recorded.

Recording a Chord Sequence when Style Playback is stopped (Chord

Looper) (PSR-SX900)

When [REC/STOP] is turned on, the [ACMP] button is also turned on automatically.

You can also stop recording by pressing the CHORD LOOPER [REC/STOP] button. In this case, only the recording stops, while Style playback will continue.

The latest chord sequence data you recorded is maintained unless you turn the power off or select a Chord Looper Memory number which contains

data. If you want to save the data, see page 15.

NOTE

NOTICE

PSR-SX900/SX700 Reference Manual 15

1

Styles

On the Chord Looper display, you can memorize the recorded chord sequence of the Chord Looper function to one of

the eight memories for easy recall. You can save all eight memorized data slots as a single Chord Looper Bank (*.clb)

file or export a single memory as a Chord Looper Data (*.cld) file.

Operation display is called up via: [MENU]  [Chord Looper].

This section covers how to memorize, save/recall, and export/import the recorded data.

Memorizing the Recorded Chord Looper Data

1 Record the desired chord sequence.

For details on recording the chord sequence, see page 14 or refer to the Owner’s Manual.

2 Touch [Memory] on the Chord Looper display.

A guidance message appears on the display.

3 Touch the desired number to memorize.

The data is memorized, and the content of the memorized data is shown on the corresponding area.

Saving and Calling up Your Custom Chord Sequences (Chord Looper)

(PSR-SX900)

If you turn the power off at this point, the Memory will be cleared. To save the memorized data as a file, see pages 16 and 17.

1234

5678

Data Structure on the Chord Looper display

Chord Looper Bank

(*.clb) file

Load[Save]

[Export]

Chord Looper Bank

[Import]

[Clear]

Chord Looper Data

(*.cld) file

Load

(Touch memory number to select)

Memorize

[Memory]

Current Chord Looper

data (not displayed)

Recording

[Rec/Stop]

Loop Playback

[On/Off]

2

3

Same as the CHORD LOOPER

[REC/STOP] and [ON/OFF] buttons.

NOTICE

16 PSR-SX900/SX700 Reference Manual

Saving the Recorded Data as a Bank File

The eight memorized chord sequences are can be saved as a single Chord Looper Bank (*.clb) file.

1 Record the desired chord sequence, and then memorize to the number [1]–[8].

To record the chord sequence, see page 14 or refer to the Owner’s Manual.

To memorize the recorded data, see page 15.

2 Touch (Save) to save the data in the Chord Looper Memory [1]–[8] as a single Bank

file.

Recalling the Chord Looper Bank File and Playing Back a Style with a

Chord Sequence

1 Select a Style.

2 Load the Chord Looper Bank name to call up the Chord Looper Bank Selection display,

and then select the desired Bank.

3 Touch the Chord Looper Memory number you wish to use first.

If you select a Chord Looper Bank file before saving the edited data, the data will be lost.

Each Chord Looper Memory is named automatically such as “CLD_001,” but it can be renamed by exporting the file and import it (page 17).

Touch [On/Off] to turn it on here, if you want to start automatic Style playback from the beginning of your performance.

1

2

NOTICE

NOTE

2

3

Same as the CHORD LOOPER

[REC/STOP] and [ON/OFF] buttons.

Chord Looper Bank file name

NOTE

PSR-SX900/SX700 Reference Manual 17

1

Styles

4 Start playback of the Style and play along with it.

5 Turn on [On/Off] just before the measure you want to start loop playback of the chord

sequence.

[On/Off] flashes to indicate loop playback is in standby. On the next measure of the Style, [On/Off] is turned on

and the chord sequence will be played back in a loop.

6 As necessary, change the Chord Looper Memory number.

To change the Memory number, touch the desired number. The chord sequence changes on the next measure of the

Style.

7 Touch [On/Off] to stop loop playback.

The playback of the chord sequence is immediately stopped, and the Style will return to normal playback.

Editing the Chord Looper Bank (Export, Import, Clear)

Each Chord Looper Memory number contained in the Chord Looper Memory Bank can be edited (cleared, imported,

and exported) one by one. The Memory data is exported/imported as a Chord Looper Data (*.cld) file.

1 Touch the desired operation: [Clear], [Import] or [Export].

Follow the onscreen instructions. To cancel the operation at this point, simply touch an empty area of the display.

2 Touch the desired memory number, and then execute the action selected in the step 1

as below.

3 As necessary, touch (Save) to save the edited Chord Looper Bank as a new file.

During loop playback, [On/Off] lights (and the CHORD LOOPER [ON/OFF] lights in orange), and the [ACMP] button flashes. In this condition, the chord input from

the keyboard is disabled, and the whole keyboard can be used for performance.

If you want to clear all data shown in the Chord Looper display, touch (New) to create the new Bank.

Clear A Confirmation message appears. Touch [Yes] to execute clear.

Import The File Selection display is called up. Touch the desired file to import, and then touch

or press the [EXIT] button to return.

Export The File Selection display is called up to export. Touch [Export] on the display, enter the file

name, and then touch [OK].

The file name is entered automatically, but you can rename it when saving.

If you select a Chord Looper Bank file before saving the edited data, the data will be lost.

NOTE

2

1

NOTICE

18 PSR-SX900/SX700 Reference Manual

The Style Creator function lets you create your original Style by recording the rhythm pattern via the keyboard and

using already-recorded Style data. Basically, select a preset Style that is closest to the type you want to create, then

record the rhythm pattern, bass line, chord backing, or phrase (referred to as “Source Pattern” in the Style Creator) for

each channel of each Section.

Style Data Structure—Consisting of Source Patterns

A Style is made up of different Sections (Intro, Main, Ending, etc.) and each Section has eight separate channels, each

of which is referred to as a “Source Pattern.” With the Style Creator feature, you can create a Style by separately

recording the Source Pattern for each channel, or by importing pattern data from other existing Styles.

Creating/Editing Styles (Style Creator)

(PSR-SX900) Limitations on the Audio part:

• If you select an Audio Style as starting data, the Audio part will be used as is. The Audio part cannot be deleted,

edited or created from scratch.

• The created Style containing the Audio part can be used only via an instrument that supports Audio Styles as well

as the SFF GE format.

• The Audio part cannot be copied from another Style or Section in the “Assembly” display (page 24). If you want to

use a specific Audio part, make sure to select the corresponding Audio Style before calling up the Style Creator

display.

Phrase 2

Phrase 1

Pad

Chord 2

Chord 1

Bass

Rhythm 2

Rhythm 1

Audio Part

Recording or copying from another Style

(Only for PSR-SX900)

Used as is when selecting an Audio Style as starting

data. This cannot be edited or deleted.

Main A

Main B

Fill In

Intro

Ending 2

Ending 3

Creating a Source Pattern

for each channel separately

PSR-SX900/SX700 Reference Manual 19

1

Styles

Basic Procedure for Creating a Style

1 Select the desired Style to be used as the basis for the new Style.

2 Call up the Style Creator display via [MENU]  [Style Creator].

3 On the “Basic” display, select the desired Section.

As necessary, make the following settings.

• If you want to create a Style entirely from scratch, touch [Initialize Style] to make the current Style empty.

• If you initialize the Style, set the “Pattern Length” (measure amount of the Source Pattern). After inputting the

value, touch [Execute] to actually enter the changes.

• Set the overall parameters such as “Tempo” and “Time Signature.” The settings here commonly applies to all

Sections. After setting the Time Signature, touch [Execute] to actually enter the changes.

4 Create the Source Pattern for each channel.

• Realtime Recording (page 20)

Lets you record the Style by simply playing the keyboard.

• Step Recording (page 23)

Lets you enter each note individually.

•Style Assembly (page 24)

Lets you copy various patterns from other preset Styles or Styles you have already created.

5 Edit the already recorded channel data.

• Channel Edit (page 24)

Lets you edit the MIDI data of the already recorded channels.

•SFF Edit (page 26)

Lets you edit the SFF (Style File Format) related parameters of already recorded channels other than Rhythm

channels.

• Drum Setup (page 30)

Lets you edit the rhythm part of the Style, such as changing the sounds of the individual instruments.

6 Repeat steps 3–5 as desired.

7 Touch (Save) to save the created Style.

You can also select the Section by pressing one of the corresponding STYLE CONTROL buttons on the panel.

(PSR-SX900) If an Audio Style is selected as starting data, changing the pattern length deletes the corresponding Audio part.

NOTE

The created Style will be lost if

you change to another Style or

turn off the power to the instru-

ment without carrying out the

Save operation.

NOTICE

20 PSR-SX900/SX700 Reference Manual

Realtime Recording

The explanations here apply to step 4 of the Basic Procedure on page 19. In the “Rec Channel” display, you can create

the channel data via Realtime Recording.

 Recording Rhythm Channels 1–2

1 On the “Rec Channel” display, touch and hold the desired channel until it turns red.

The selected channel becomes the Recording target no matter whether the channel already contains data or not. If

recorded data is already included, you should record the additional notes to the selected channel as Overdub

Recording.

2 If necessary, select a Voice, and then practice the rhythm pattern to be recorded.

Touch the instrument icon (illustration) to call up the Voice Selection display then select the desired Voice such as

a Drum Kit. After selecting, close the Voice Selection display to return to the Style Creator display. With the

selected Voice, practice the rhythm pattern to be recorded.

Realtime Recording Characteristics in the Style Creator

• Loop Recording

Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also done using

loops. For example, if you start recording with a two-measure Main section, the two measures are repeatedly

recorded. Notes that you record will play back from the next repetition (loop), letting you record while hearing

previously recorded material.

• Overdub Recording

This method records new material to a channel already containing recorded data, without deleting the original data.

In Style recording, the recorded data is not deleted, except when using functions such as “Clear Drum Inst”

(page 21) “Delete” (pages 21, 23) and “Remove Event” (page 25). For example, if you start recording with a two-

measure Main section, the two measures are repeated many times. Notes that you record will play back from the

next repetition, letting you overdub new material to the loop while hearing previously recorded material. When

creating a Style based on an existing internal Style, overdub recording is applied only to the rhythm channels. For

all other channels (except rhythm), you need to delete the original data before recording.

(PSR-SX900) If you select an Audio Style as starting data:

Playback of the Audio part can be turned on or off, but it cannot be edited or deleted. Note that the rhythm pattern of

this part will be used in the new Style you intend to create. If you want to create a rhythm phrase in addition to the

Audio part, follow the steps below.

2

1

(PSR-SX900) Turns playback

of Audio Part on/off

La page charge ...

Yamaha PSR-SX700 Manuel utilisateur

Ce manuel convient également à

Yamaha PSR-SX700 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents