Lenco MC-250BK Le manuel du propriétaire

1

Model: MC-250

USER MANUAL

Micro set with SMART radio (internet, DAB+, FM), CD player

and Bluetooth

HANDLEIDING

Microset met SMART radio (internet, DAB+, FM), cd-speler

en Bluetooth

BEDIENUNGSANLEITUNG

Mikroanlage mit SMART-Radio (Internet, DAB+, FM),

CD-Player und Bluetooth

MODE D’EMPLOI

Mini-chaîne avec radio SMART (Internet, DAB +, FM),

lecteur CD et Bluetooth

MANUAL DEL USUARIO

Micro equipo con radio SMART (internet, DAB+, FM),

reproductor de CD y Bluetooth

2

Index:

English........................................................................................................................................ 3

Nederlands .............................................................................................................................. 37

Deutsch .................................................................................................................................... 82

Français .................................................................................................................................. 131

Español .................................................................................................................................. 177

Version : 2.0

3

English

MC-250

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device on a shelf,

leave 5 cm (2”) free space around the whole device.

4. Install in accordance with the supplied user manual.

5. * Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs

and the cable’s exit point. Do not place heavy items on the power adaptor, which may

damage it. Keep the entire device out of children’s reach! When playing with the power

cable, they can seriously injure themselves.

6. * Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat-generating products or naked flame.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and

restart the device following the instruction manual. During file transmission, please

handle with care and operate in a static-free environment.

10. Warning! Never insert an object into the product through the vents or openings. High

voltage flows through the product and inserting an object can cause electric shock

and/or short circuit internal parts. For the same reason, do not spill water or liquid on

the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming

pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all

electrical appliances. If you notice smoke, an excessive build-up of heat or any other

unexpected phenomena, you should disconnect the plug from the main power socket

immediately.

14. This device must operate on a power source as specified on the specification label. If

you are not sure of the type of power supply used in your home, consult your dealer or

local power company.

15. * The socket outlet must be installed near the equipment and must be easily accessible.

4

16. * Do not overload ac outlets or extension cords. Overloading can cause fire or electric

shock.

17. * Devices with class 1 construction should be connected to a main socket outlet with a

protective earthed connection.

18. * Devices with class 2 construction do not require a earthed connection.

19. Keep away from rodents. Rodents enjoy biting on power cords.

20. * Always hold the plug when pulling it out of the main supply socket. Do not pull the

power cord. This can cause a short circuit.

21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To

remove severe stains, you may use a damp cloth with dilute detergent.

23. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

24. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

25. If the unit has USB playback function, the usb memory stick should be plugged into the

unit directly. Don’t use an usb extension cable because it can cause interference

resulting in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and make sure that no

objects filled with liquids, such as vases, are placed on or near the apparatus.

27. * To completely disconnect the power input, the mains plug of the apparatus shall be

disconnected from the mains, as the disconnect device is the mains plug of apparatus.

28. If the unit works with battery, Battery shall not be exposed to excessive heat such as

sunshine, fire or the like.

29. Attention should be drawn to the environmental aspects of battery disposal.

30. The apparatus can only be used in moderate extremely cold or climates warm

environments should be avoided.

31. The rating label has been marked on the bottom or back panel of the apparatus.

32. This device is not intended for use by people (including children) with physical, sensory

or mental disabilities, or a lack of experience and knowledge, unless they’re under

supervision or have received instructions about the correct use of the device by the

person who is responsible for their safety.

33. This product is intended for non professional use only and not for commercial or

industrial use.

34. Make sure the unit is adjusted to a stable position. Damage caused by using this

product in an unstable position or by failure to follow any other warning or precaution

contained within this user manual will not be covered by warranty.

35. Never remove the casing of this apparatus.

36. Never place this apparatus on other electrical equipment.

5

37. Do not use or store this product in a place where it is subject to direct sunlight, heat,

excessive dust or vibration.

38. Do not allow children access to plastic bags.

39. Only use attachments/accessories specified by the manufacturer.

40. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as the power supply cord or the plug,

when liquid has been spilled or objects have fallen into the apparatus, when the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

41. *Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire

or electric shock.

42. Prolonged exposure to loud sounds from personal music players may lead to temporary

or permanent hearing loss.

43. If the product contains or is delivered with a remote control containing coin / cell

batteries:

Warning :

⚫ “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

⚫ [The remote control supplied with] This product contains a coin / button cell

battery is swallowed, it can cause severe internal burns in just 2 hours and can

lead to death.

⚫ Keep new and used batteries away from children.

⚫ If the battery compartment does not close securely, stop using the product and

keep it away from children.

⚫ If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

INSTALLATION

● Unpack all parts and remove protective material.

● *Do not connect the unit to the mains before checking the mains voltage and before all

other connections have been made.

*Those instructions are related only to products using power cable or AC power adaptor.

Accessories:

User manual

6

Power adaptor

Remote control

7

1. LCD Display (TFT2.8’’)

2. Remote Control Receiver

3. Earphone Jack

4. USB Port for Playback

5. Power and Mode Button

6. Scan Button

7. Info/Menu Button

8. Back Button

9. Memory Button

10. Prev Button

11. Stop Button

12. Next Button

13. Volume/Play/pause/OK Button

14. Aux in jack

15. R/L speaker output

16. DC IN (12V/2.5A)

17. Telescopic antenna

8

1

3

4

7

8

11

14

17

21

2

5

6

9

10

12

13

15

16

19

22

18

20

9

1. Standby button

2. Switch speaker ON/OFF

3. Menu-Main menu and Info

4. Preset-saved stations, Favorites, etc.

5. Scan-DAB/FM scan

6. Sleep button

7. Go back one track

8. Play/Pause

9. Go forward one track

10. Stop play button

11. Mode button

12. EQ-Set tone

13. Up cursor button

14. Left cursor button

15. OK Confirm selection

16. Right Cursor button

17. Down cursor button

18. V- Decrease volume

19. V+ Increase volume

20. 0.....9 Call up favorites/Memory; input

letters and numbers

21. Prog for USB/CD

22. Rep. for USB/CD

Battery installation for remote control:

1. Push on the ‘open’ marking of the battery cover and slide it downwards

2. Install two (2) x AAA size batteries into the battery compartment (check the correct

polarity)

3. slide the battery cover back

Battery Precautions:

Follow these precautions:

1. Use only the type of battery specified in this manual.

2. Be sure to follow the correct polarity when installing the battery as indicated in the

battery compartment. A battery which is inserted in the wrong way may cause damage

to the device.

10

3. Do not try to recharge single use batteries. (Follow the battery manufacturer’s

directions.)

4. Do not throw batteries into fire because they may explode.

5. Clean the battery contacts of the device prior to replacing empty batteries.

Connecting the speakers to the main unit

The left speaker has to be connected to the Jack marked with L. Connect the red cable to the

red connector jack and the black one to the black connector jack.

The right speaker has to be connected the same way on the Jack marked with R.

First use

1. Connect the power plug to the DC in (16) on the back of the main unit and then plug the

Adapter into the wall outlet. The display will show the Lenco logo as below

11

2. Wait for about 20 seconds, the display will appear as below. Press the ‘OK’ knob on the

unit’s front pane or the remote control to select “Yes” then press the “OK” button on

the unit’s front panel or the remote control to continue with the setup wizard.

3. The display will appear as below. Press the ‘OK’ knob on the unit or remote control to

highlight the desired hour format and press the “OK” knob on the unit or remote

control to continue.

4. The time and date auto update page will appear as below.

Explanation of the options:

Update from DAB: The time and date will be synchronized from a DAB signal

Update from FM: The time and date will be synchronized from a FM signal

12

Update from Network: The time will be synchronized from the Internet/network signal

No update: Time and date have to be set manually

Turn the navigation knob on the unit or use the navigation buttons on the remote control to

highlight one of the options

If ‘Update from network’ is selected:

Set the local time zone and set the Daylight savings to ON or OFF.

If ‘No update’ is selected:

Set the date and time manually.

The day number will flash, turn the navigation knob on the unit or using the navigation

buttons on the remote control to set the desired day, then press the ‘OK’ button on the unit

or the remote control to confirm. Now the month number will flash. Use the same procedure

as setting the day, then do the same to set the year and time. Go ahead to next setup page.

5. The Network settings page will appear as below. Turn the navigation knob on the unit

or using the navigation buttons on the remote control to select ‘YES’ or ‘NO’.

Press the “OK” knob on the unit or remote control to continue.

13

6. The screen will be as below. In SSID page, choose one of the wireless networks from the

list or choose one of the network with the prefix [WPS]…

If for example. the wireless network ABC123 is selected, the Key page will pop up.

Turn the navigation knob on the unit or use the navigation buttons on the remote control to

highlight the character needed, press the ‘OK’ button on the unit or remote control to

continue to the next character and repeat the above to complete your WIFI password.

BKSP = delete the last entered character

OK = confirm the password

CANCEL = cancel entering the password

After completing the correct password, select the OK on the display and press the ‘OK’

button on the remote control to continue. The next pages will appear as below.

NOTE: You can also use the number buttons on the remote control to enter the WIFI

password.

14

When setup wizard is completed, press the ‘OK’ button on the unit or remote control to exit

In the SSID page, If for example the network [WPS]123 is selected, the WPS Menu page will

appear.

NOTE: to use the WPS function you will need a WPS compatible WIFI router!

If "Push Button" is selected, the below page will appear. Press the WPS connect button on

your router and then press the OK knob on the unit or the remote control.

15

If “Pin” is selected,

the unit generates an 8-digit code number which you have to enter in your wireless

router/accesspoint configuration menu. (check the manual of your router if you need help)

When "Skip WPS" is selected, the below page will appear. Enter your WIFI network passkey

Turn the navigation knob on the unit or use the navigation buttons on the remote control to

highlight the character needed, press the ‘OK’ button on the unit or remote control to

continue to the next character and repeat the above to complete your WIFI password

BKSP = delete the last entered character

OK = confirm the password

CANCEL = cancel entering the password

After completing the correct password, select the OK on the display and press the ‘OK’

button on the remote control to continue.

NOTE: You can also use the number buttons on the remote control to enter the WIFI

password.

Main Menu

After setup is completed, the unit will enter the main menu. The following page will appear.

Turn the navigation knob on the unit or press the or button on the remote control to

navigate through the items in main menu list.

16

INTERNET RADIO

Select internet radio from the main menu or press ‘mode’ on the remote control until

internet radio is selected.

The Lenco MC-250 internet radio can play thousands of radio stations and podcasts from

around the world through a broadband internet connection. When you select Internet radio

mode, it contacts the solution provider Internet radio portal to get a list of stations,

organized into different categories like Country and Popular. Once you select a station, radio

connects directly to that station.

The common local controls for sound volume, mute, play/stop and Presets are available.

Note: The station list menu is provided from the Internet radio portal, so it is only

accessible when radio is connected to the Internet. Station lists and submenus will change

from time to time.

The station list is organized into various categories and search facilities:

UK (this can be another country. Depends on the country you are using this device)

Presents a sub-menu to search for stations using a variety of categories, for example, local

stations, BBC stations, Genres or stations from a specific city. Choose the required category

and either a further list of sub categories is shown, or (if there is no further sub-categories)

the available stations for the chosen category are listed.

17

History

When Internet radio mode restarts, the last-listened station is selected. To select another

recently used station, select Menu > Station list > History then one of the stations listed.

Most recent stations appear at the top of the list.

Search

You can also search through Internet broadcasts for stations with particular keywords in their

title. To search, select Menu > Station list > Search. Enter a keyword by selecting characters in

turn, then OK. The search entry screens are similar in operation to the Wi-Fi passphrase

entry screen.

Select a broadcast from the list.

18

Location

To select an Internet broadcast from a particular location, select Menu > Station list >

Location >. Select a continent from the menu and a list of countries available is presented,

select a country and the available internet radio stations are presented. Choose a radio

station from the list to tune to that station.

Popular

Presents a list of the most popular internet stations from around the world.

Discover

Allows you to select from a list of stations defined by either their origin (Country), Genre

(style of music) or language. Navigate through the category options; once you have made

your selection a screen confirms your selected category and the number stations within that

category. To see the list, select the option showing the number of available stations.

Now playing information

While the stream is playing, the screen shows its name and description. If artist and track

information is available, this is also shown. To view further information, press Info. Each time

you press Info, another set of information is displayed, cycling through the following details:

⚫ Slogan (default; where available)

⚫ Language/Location

⚫ Codec and sampling rate

⚫ Playback buffer

⚫ Today’s Date

Podcasts

This Radio can play podcasts from around the world through a broadband internet

connection. When you select Podcast mode, radio contacts the solution provider portal to

get a list of available podcasts. Once you select a podcast, radio connects directly to that

podcast source. To enter Podcast mode, either press Mode to cycle through the listening

modes until Podcasts is displayed or select Menu > Main menu > Podcasts. The common

local controls for sound volume, mute, play/pause and Presets are available.

Note: The podcast menu is provided from the Podcast portal, so it is only accessible when

radio is connected to the Internet. Podcast lists and submenus will change from time to

time.

⚫ UK

⚫ Search

⚫ Popular

⚫ Location

⚫ Discover

19

UK (this can be another country. Depends on the country you are using this device)

Presents a sub-menu to search for podcasts using a variety of categories, for example,

comedy of the week, books and authors, popular, etc. Choose your favorite category and

either a further list of sub categories is shown, or (if there is no further sub-categories) the

available podcasts for the chosen category are listed.

Search

You can also search through podcasts with particular keywords in their title. To search, select

Menu > Podcast list > Search. Enter a keyword by selecting characters in turn, then OK. The

search entry screens are similar in operation to the Wi-Fi pass phrase entry screen.

Select a broadcast from the list.

Location

To select a Podcast from a particular location, select Menu > Podcast list > Location >. Select

a continent from the menu and a list of countries available is presented, select a country and

the available podcasts are presented. Choose a podcast from the list to tune to that podcast.

Popular

Presents a list of the most popular podcasts from around the world.

Discover

Allows you to select from a list of podcasts defined by either their origin (Country), Genre

(style of music) or language. Navigate through the category options; once you have made

your selection a screen confirms your selected category and the number podcasts within

that category. To see the list, select the option showing the number of available podcasts.

Storing a station as a favorite

Internet Radio Station storing or preset:

During play, press and hold the ´Preset´ button on the unit or remote control to store the

current station as a favorite.

20

The following page will appear:

Turn the navigation knob on the unit or press the or buttons on the remote control

and select your desired location, press the ‘OK’ button on the unit /remote control to

confirm storing the station on the selected preset.

Repeat the above steps to store up to 10 preset stations.

You will find them in My Added Stations list.

Recall a stored preset

Press the ‘PRESET’ button on the unit or remote control to recall a stored station, Turn the

navigation knob on the unit or press the or buttons on the remote control and select

your desired station, press ‘OK’ and listen to the selected station.

Station information:

Press the ‘INFO’ button on the remote control repeatedly to check the available station

information.

Press the button to pause and press it again to resume play.

Press the MENU button on the unit or press the Menu button on remote control to return

back to internet radio menu.

Explanation of symbol on playing page:

USB mode:

Insert a USB memory stick with MP3 music into the USB port on the front panel.

Press mode until ‘USB’ is selected. The radio will start to read the contents of the USB

memory stick and will start automatically.

La page charge ...

Lenco MC-250BK Le manuel du propriétaire

Lenco MC-250BK Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents