Yamaha RX-A780 Le manuel du propriétaire

AV Receiver

Owner's Manual

• This unit is a product for enjoying video and music at home.

• This manual explains preparations and operations for everyday users of the unit.

• Read the supplied booklet “Quick Start Guide” before using the unit.

EN

CONTENTS

BEFORE USING THE UNIT 8

How to use this manual............................................................................ 8

How to use this manual......................................................................................................................................................... 8

Checking the accessories.......................................................................... 8

Checking the accessories...................................................................................................................................................... 8

Using the remote control......................................................................... 9

Insert the batteries in the remote control....................................................................................................................... 9

Operating range of the remote control........................................................................................................................... 9

FEATURES 10

What you can do with the unit............................................................... 10

Part names and functions...................................................................... 12

Part names and functions of the front panel............................................................................................................... 12

Part names and functions of the front display............................................................................................................ 14

Part names and functions of the rear panel................................................................................................................. 15

Part names and functions of the remote control....................................................................................................... 16

PREPARATIONS 17

1 Connecting speakers........................................................................ 17

Names and functions of speakers.................................................................................................................................... 17

Speaker systems and speakers to be connected....................................................................................................... 18

Speaker requirements.......................................................................................................................................................... 18

Setting the speaker impedance....................................................................................................................................... 19

Cable requirements.............................................................................................................................................................. 19

How to connect speakers................................................................................................................................................... 19

How to place speakers (speaker systems).................................................................................................................... 21

Advanced speaker systems................................................................................................................................................ 27

2 Connecting a TV................................................................................ 30

HDMI connection with a TV............................................................................................................................................... 30

HDMI connection with another TV or a projector..................................................................................................... 30

3 Connecting playback devices.......................................................... 31

HDMI connection with a video device such as a BD/DVD player......................................................................... 31

Connection other than HDMI with a playback device............................................................................................. 31

Connecting to the jack on the front panel................................................................................................................... 33

4 Connecting the radio antennas....................................................... 34

Connecting the FM/AM antennas (Except for U.K., Europe, Russia and Australia models)........................ 34

Connecting the DAB/FM antenna (U.K., Europe, Russia and Australia models)............................................. 35

5 Preparing for connecting to a network........................................... 36

Preparing for connecting to a network......................................................................................................................... 36

Connecting a network cable (wired connection)...................................................................................................... 36

Preparing wireless antennas (wireless connection).................................................................................................. 37

6 Connecting other devices................................................................ 37

Connecting an external power amplifier...................................................................................................................... 37

Connecting a device compatible with the trigger function.................................................................................. 38

7 Plugging in the power cable............................................................ 39

Plugging in the power cable............................................................................................................................................. 39

8 Selecting the on-screen menu language........................................ 40

Selecting the on-screen menu language...................................................................................................................... 40

9 Configuring the necessary speaker settings.................................. 41

Assigning speaker configuration..................................................................................................................................... 41

Optimizing the speaker settings automatically (YPAO).......................................................................................... 42

Checking the YPAO measurement results.................................................................................................................... 44

Reloading the previous YPAO adjustments................................................................................................................. 45

Error messages from YPAO................................................................................................................................................ 46

Warning messages from YPAO......................................................................................................................................... 47

10 Setting MusicCast............................................................................. 48

What is MusicCast.................................................................................................................................................................. 48

Using MusicCast CONTROLLER......................................................................................................................................... 48

Adding the unit to the MusicCast network.................................................................................................................. 48

En

2

ENJOYING SOUND 49

Enjoying sound field effects.................................................................. 49

Select your favorite sound mode..................................................................................................................................... 49

Enjoying 3D sound fields (CINEMA DSP 3D)................................................................................................................ 49

Enjoying sound field effects optimized for the type of content........................................................................... 50

Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)............................................ 50

Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT).................................... 50

Enjoying surround sound with headphones (SILENT CINEMA)............................................................................ 50

Enjoying unprocessed playback............................................................ 51

Enjoying original sound (straight decode)................................................................................................................... 51

Enjoying multichannel playback without sound field effects (surround decoder)....................................... 51

Enjoying pure high fidelity sound (Pure Direct)......................................................................................................... 52

Enjoying enhanced bass sound............................................................. 53

Enhancing the bass (Extra Bass)....................................................................................................................................... 53

Enjoying enhanced compressed music................................................. 53

Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)......... 53

Enjoying Dolby Atmos® and DTS:X™..................................................... 54

Enjoying Dolby Atmos® and DTS:X™.............................................................................................................................. 54

Enjoying music in multiple rooms......................................................... 55

Playing back music in multiple rooms........................................................................................................................... 55

Connecting Zone2 speakers.............................................................................................................................................. 55

Operating the unit from Zone2 (remote connection).............................................................................................. 57

Controlling Zone2................................................................................................................................................................. 58

Enjoying the same source in multiple rooms (party mode)................................................................................... 59

PLAYBACK 60

Basic playback procedure...................................................................... 60

Basic procedure for playing back video and music................................................................................................... 60

Selecting an HDMI output jack......................................................................................................................................... 61

Switching information on the front display................................................................................................................. 61

Item names and functions of the playback screen.................................................................................................... 62

Item names and functions of the browse screen....................................................................................................... 63

Listening to FM/AM radio (Except for U.K., Europe, Russia and

Australia models).................................................................................... 64

Setting the frequency steps............................................................................................................................................... 64

Selecting a frequency for reception............................................................................................................................... 65

Selecting a preset station................................................................................................................................................... 66

Registering FM radio stations automatically (FM Auto Preset)............................................................................. 66

Registering a radio station manually.............................................................................................................................. 67

Clearing preset stations....................................................................................................................................................... 68

Clearing all preset stations................................................................................................................................................. 68

Listening to DAB radio (U.K., Europe, Russia and Australia models)

.................................................................................................................. 69

Preparing the DAB tuning.................................................................................................................................................. 69

Selecting a DAB radio station for reception................................................................................................................. 70

Selecting a preset DAB radio station.............................................................................................................................. 70

Registering a DAB radio station as presets................................................................................................................... 71

Clearing preset DAB radio stations................................................................................................................................. 72

Clearing all preset DAB radio stations............................................................................................................................ 72

Displaying the DAB information...................................................................................................................................... 73

Checking reception strength of each DAB channel label....................................................................................... 74

Listening to FM radio (U.K., Europe, Russia and Australia models)

.................................................................................................................. 75

Selecting a frequency for FM radio reception............................................................................................................. 75

Selecting a preset FM radio station................................................................................................................................. 76

Registering FM radio stations automatically (FM Auto Preset)............................................................................. 76

Registering an FM radio station manually.................................................................................................................... 77

Clearing preset FM radio stations.................................................................................................................................... 78

Clearing all preset FM radio stations.............................................................................................................................. 78

Displaying the Radio Data System information......................................................................................................... 79

Playing back music stored on a Bluetooth® device.............................. 80

Playback Bluetooth® device music on the unit........................................................................................................... 80

Enjoying audio using Bluetooth® speakers/headphones....................................................................................... 81

Playing back music with AirPlay............................................................ 82

Playback of iTunes/iPhone music contents with AirPlay........................................................................................ 82

Playing back music stored on a USB storage device............................ 83

Playback of USB storage device contents..................................................................................................................... 83

En

3

Playing back music stored on media servers (PCs/NAS)...................... 84

Media sharing setup on media servers (PCs/NAS)..................................................................................................... 84

Playing back music stored on media servers (PCs/NAS)......................................................................................... 84

Listening to Internet radio..................................................................... 86

Selecting an Internet radio station.................................................................................................................................. 86

Registering favorite Internet radio stations................................................................................................................. 86

Listening to music streaming services.................................................. 87

Listening to a streaming service...................................................................................................................................... 87

Useful playback functions...................................................................... 88

SCENE function....................................................................................................................................................................... 88

Shortcut function................................................................................................................................................................... 91

Configuring playback settings for different playback sources

(Option menu)......................................................................................... 93

Basic operation of the Option menu.............................................................................................................................. 93

Option menu items............................................................................................................................................................... 94

Adjusting the tone of the audio output........................................................................................................................ 95

Configuring the volume automatically based on the YPAO measurement results...................................... 95

Adjusting the volume or perceive height of dialogue sounds............................................................................. 96

Adjusting the delay of the Lipsync function................................................................................................................ 97

Setting Compressed Music Enhancer............................................................................................................................ 97

Correcting volume differences during playback........................................................................................................ 98

Setting the use of Extra Bass.............................................................................................................................................. 98

Enabling the video signal processing............................................................................................................................ 99

Selecting a video source to be output with the selected audio source............................................................ 99

Configuring the shuffle/repeat setting.......................................................................................................................... 99

Switching between stereo and monaural for FM radio reception.................................................................... 100

Setting presets for radio stations.................................................................................................................................. 100

Adding an Internet radio station to the “Favorites” folder.................................................................................. 102

Removing an Internet radio station from the “Favorites” folder....................................................................... 102

Performing an initial scan for DAB radio reception................................................................................................ 102

Checking reception strength of each DAB channel label..................................................................................... 103

Checking the current status information................................................................................................................... 103

CONFIGURATIONS 104

Configuring various functions (Setup menu)..................................... 104

Basic operation of the Setup menu.............................................................................................................................. 104

Setup menu items............................................................................................................................................................... 105

Configuring the speaker settings........................................................ 109

Setting your speaker system........................................................................................................................................... 109

Setting the size of the front speakers.......................................................................................................................... 109

Setting the use of a center speaker and its size....................................................................................................... 110

Setting the use of surround speakers and their size.............................................................................................. 110

Setting the layout of the surround speakers............................................................................................................. 111

Setting the use of surround back speakers and their size.................................................................................... 111

Setting the use of presence speakers and their size.............................................................................................. 112

Setting the layout of the presence speakers............................................................................................................. 112

Setting the crossover frequency of the low-frequency components.............................................................. 112

Setting the use of a subwoofer...................................................................................................................................... 113

Setting the phase of the subwoofer............................................................................................................................. 113

Setting the distance between each speaker and the listening position......................................................... 113

Adjusting the volume of each speaker........................................................................................................................ 113

Setting the equalizer.......................................................................................................................................................... 114

Outputting test tones........................................................................................................................................................ 115

Reloading the previous YPAO adjustments.............................................................................................................. 115

En

4

Configuring the sound settings........................................................... 116

Checking the current audio signal information....................................................................................................... 116

Enabling Lipsync adjustment......................................................................................................................................... 116

Setting the adjustment method of the Lipsync function..................................................................................... 117

Adjusting the delay of the Lipsync function............................................................................................................. 117

Selecting sound programs............................................................................................................................................... 118

Adjusting the sound field effect level.......................................................................................................................... 119

Adjusting the delay between the direct sound and presence sound field generation............................. 119

Adjusting the broadening effect of the presence sound field........................................................................... 119

Adjusting the loss of the presence sound field........................................................................................................ 120

Adjusting the decay time of the rear reverberant sound..................................................................................... 120

Adjusting the delay between the direct sound and reverberant sound generation................................. 120

Adjusting the volume of the reverberant sound..................................................................................................... 120

Adjusting the delay between the direct sound and surround sound field generation............................ 121

Adjusting the broadening effect of the surround sound field........................................................................... 121

Adjusting the loss of the surround sound field........................................................................................................ 121

Adjusting the delay between the direct sound and surround back sound field generation.................. 121

Adjusting the broadening effect of the surround back sound field................................................................. 122

Adjusting the loss of the surround back sound field............................................................................................. 122

Selecting the surround decoder used in the program.......................................................................................... 122

Setting the use of Center Spread.................................................................................................................................. 123

Adjusting the center localization (broadening effect) of the front sound field........................................... 123

Adjusting the entire volume for “7ch Stereo”........................................................................................................... 123

Adjusting the front and rear volume balance for “7ch Stereo”.......................................................................... 123

Adjusting the left and right volume balance for “7ch Stereo”............................................................................ 123

Adjusting the height volume balance using the presence speakers for “7ch Stereo”............................... 124

Setting the use of Monaural Mix for “7ch Stereo”................................................................................................... 124

Setting the dynamic range adjustment method..................................................................................................... 124

Setting the limit value of the volume.......................................................................................................................... 124

Setting the initial volume for when the unit is turned on.................................................................................... 125

Adjusting the CINEMA DSP 3D effect level automatically.................................................................................... 125

Setting Virtual Surround Back Speaker (VSBS)......................................................................................................... 125

Configuring the scene settings............................................................ 126

Selecting items to be included as the scene assignments................................................................................... 126

Renaming the SCENE name............................................................................................................................................. 127

Configuring the video/HDMI settings................................................. 128

Checking the current video and HDMI signal information.................................................................................. 128

Setting the use of the video signal processing........................................................................................................ 128

Setting a resolution to output HDMI video signals................................................................................................ 128

Setting an aspect ratio to output HDMI video signals........................................................................................... 129

Setting the use of HDMI Control.................................................................................................................................... 129

Setting the audio jack used for TV audio input........................................................................................................ 129

Setting the use of ARC....................................................................................................................................................... 129

Linking the standby modes of the unit and the TV................................................................................................ 130

Setting the output of HDMI audio from the TV speaker....................................................................................... 130

Setting the version of HDCP used on the HDMI input jacks................................................................................ 130

Setting the use of HDMI Standby Through................................................................................................................ 130

Configuring the network settings....................................................... 131

Checking the network information on the unit....................................................................................................... 131

Setting the network connection method (Wired/Wireless)................................................................................ 131

Setting the network parameters automatically (DHCP)........................................................................................ 131

Setting the network parameters manually................................................................................................................ 132

Setting the use of the Network Standby function.................................................................................................. 132

Setting the MAC address filter........................................................................................................................................ 133

Setting the MAC address.................................................................................................................................................. 133

Setting the use of a Digital Media Controller............................................................................................................ 133

Setting the use of volume control via AirPlay........................................................................................................... 133

Setting the network name of the unit......................................................................................................................... 134

Setting the power interlock from the unit to MusicCast compatible devices.............................................. 134

Configuring the Bluetooth® settings.................................................. 135

Setting the use of Bluetooth®......................................................................................................................................... 135

Terminating the connection between a Bluetooth® device and the unit...................................................... 135

Setting the use of the Bluetooth® Standby function.............................................................................................. 135

Setting the use of audio transmission to a Bluetooth® device........................................................................... 136

Connecting the unit to a Bluetooth® device that receives transmitted audio............................................. 136

En

5

Configuring the multi zone settings................................................... 137

Checking the Zone2 information.................................................................................................................................. 137

Setting the use of volume adjustments for Zone2 output.................................................................................. 137

Setting the Zone2 limit value of the volume............................................................................................................ 137

Setting the Zone2 initial volume for when the unit is turned on...................................................................... 138

Adjusting the time deviation in relation to the main zone.................................................................................. 138

Switching between stereo and monaural for Zone2 output.............................................................................. 138

Setting the use of Compressed Music Enhancer for Zone2 output.................................................................. 139

Adjusting the tone for Zone2 output.......................................................................................................................... 139

Setting the use of Extra Bass for Zone2 output........................................................................................................ 139

Adjusting the volume balance for Zone2 output.................................................................................................... 139

Renaming the zone name................................................................................................................................................ 140

Setting the use of switching to the party mode on Zone2.................................................................................. 140

Configuring the system settings......................................................... 141

Checking the system information on the unit.......................................................................................................... 141

Setting the on-screen menu language....................................................................................................................... 141

Combining audio of another input source with video of the current input source................................... 142

Setting input sources to be skipped when operating the INPUT key.............................................................. 143

Automatically changing the input source names displayed on the front display...................................... 144

Manually changing the input source names displayed on the front display................................................ 144

Setting the use of Auto Play function.......................................................................................................................... 145

Setting sound programs to skip when operating the PROGRAM key............................................................. 145

Setting the function for the PROGRAM key on the remote control................................................................. 145

Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.................. 146

Adjusting the brightness of the front display........................................................................................................... 146

Setting the scale of the volume display...................................................................................................................... 146

Setting the use of short messages on the TV............................................................................................................ 146

Setting the image to be used as wallpaper on the TV........................................................................................... 146

Specifying the condition for the TRIGGER OUT jack to function....................................................................... 147

Specifying the output level of the electronic signal transmitted with each input..................................... 147

Switching the output level for electronic signal transmission manually........................................................ 147

Specifying the zone with which the TRIGGER OUT jack functions are synchronized................................ 147

Setting the amount of time for the auto-standby function................................................................................. 148

Setting the use of the eco mode................................................................................................................................... 148

Preventing accidental changes to the settings........................................................................................................ 148

Updating the firmware via the network..................................................................................................................... 149

Configuring the advanced settings (ADVANCED SETUP menu)....... 150

Basic operation of the ADVANCED SETUP menu..................................................................................................... 150

ADVANCED SETUP menu items..................................................................................................................................... 150

Changing the speaker impedance setting (SP IMP.).............................................................................................. 151

Selecting the remote control ID (REMOTE ID).......................................................................................................... 151

Changing the FM/AM tuning frequency setting (TU)............................................................................................ 151

Switching the video signal type (TV FORMAT)......................................................................................................... 151

Removing the limitation on HDMI video output (MON.CHK)............................................................................. 152

Selecting the HDMI 4K signal format (4K MODE).................................................................................................... 152

Setting DTS Format Notification (DTS MODE).......................................................................................................... 153

Backuping and restoring all the settings (BKUP/RSTR)......................................................................................... 153

Restoring the default settings (INIT)............................................................................................................................. 154

Updating the firmware (UPDATE)................................................................................................................................. 154

Checking the firmware version (VERSION)................................................................................................................. 154

TROUBLESHOOTING 155

When any problem appears................................................................. 155

If trouble occurs, first check the following:................................................................................................................ 155

Power, system, or remote control trouble................................................................................................................. 155

Audio trouble....................................................................................................................................................................... 157

Video trouble........................................................................................................................................................................ 160

FM/AM radio trouble (AM radio feature is not available for the U.K., Europe, Russia and Australia

models)...................................................................................................................................................................................

161

DAB radio trouble (U.K., Europe, Russia and Australia models)

..........................................................................

162

USB trouble........................................................................................................................................................................... 163

Network trouble.................................................................................................................................................................. 163

Bluetooth® trouble

.............................................................................................................................................................. 165

Error indications on the front display................................................. 167

Error indications on the front display.......................................................................................................................... 167

APPENDIX 169

Updating the unit’s firmware via the network................................... 169

Firmware updates............................................................................................................................................................... 169

Updating the unit’s firmware via the network......................................................................................................... 170

Using wireless surround speakers (MusicCast Surround function)

................................................................................................................ 171

Using wireless surround speakers (MusicCast Surround function)................................................................... 171

En

6

Connecting to a network wirelessly.................................................... 173

Selecting a wireless network connection method.................................................................................................. 173

Setting up a wireless connection using the WPS button..................................................................................... 174

Setting up a wireless connection using an iOS device.......................................................................................... 174

Setting up a wireless connection by selecting from the list of available access points............................ 176

Setting up a wireless connection manually............................................................................................................... 177

Setting up a wireless connection by using the WPS PIN code........................................................................... 179

Input/output jacks and cables............................................................. 180

Video/audio jacks................................................................................................................................................................ 180

Video jacks............................................................................................................................................................................. 180

Audio jacks............................................................................................................................................................................ 181

Using presence speakers...................................................................... 182

Presence speaker layout................................................................................................................................................... 182

Installing the presence speakers in Front Height position.................................................................................. 182

Installing the presence speakers in Overhead position........................................................................................ 182

Using Dolby Enabled speakers as the presence speakers.................................................................................... 183

Glossary................................................................................................. 184

Glossary of audio information........................................................................................................................................ 184

Glossary of HDMI and video information................................................................................................................... 185

Glossary of network information................................................................................................................................... 186

Glossary of Yamaha technologies................................................................................................................................. 186

Supported devices and file formats.................................................... 187

Supported Bluetooth® devices....................................................................................................................................... 187

Supported USB devices..................................................................................................................................................... 187

Supported AirPlay devices............................................................................................................................................... 187

Supported file formats...................................................................................................................................................... 188

Video signal flow.................................................................................. 188

Video signal flow................................................................................................................................................................. 188

Video conversion table..................................................................................................................................................... 189

Additional information on HDMI......................................................... 190

HDMI Control and synchronized operations............................................................................................................ 190

Audio Return Channel (ARC)........................................................................................................................................... 191

HDMI signal compatibility............................................................................................................................................... 192

Trademarks........................................................................................... 193

Trademarks............................................................................................................................................................................ 193

Specifications........................................................................................ 194

Specifications........................................................................................................................................................................ 194

Default settings.................................................................................... 198

Default settings of the Option menu........................................................................................................................... 198

Default settings of the Setup menu............................................................................................................................. 198

Default settings of the ADVANCED SETUP menu.................................................................................................... 200

En

7

BEFORE USING THE UNIT

How to use this manual

When reading this manual, mind the following items.

• The illustrations of the main unit used in this manual are of the U.S.A. model, unless

otherwise specified.

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to

change without notice.

• This manual mainly explains operations using the menu displayed on the TV screen.

Operations with the TV screen menu are only available when your TV is connected

to the unit via HDMI.

• This manual explains operations using the supplied remote control.

• This manual describes all the “iPod touch”, “iPhone” and “iPad” as the “iPhone”.

“iPhone” refers to “iPod touch”, “iPhone” and “iPad”, unless otherwise specified.

WARNING:

Indicates precautions for the possibility of death or serious injury.

CAUTION:

Indicates precautions for the possibility of minor or moderate injury.

NOTICE:

Indicates precautions for use to avoid the possibility of malfunction/damage to the unit.

NOTE:

Indicates instructions and supplementary explanations for optimum use.

Checking the accessories

Check that the following accessories are supplied with the product.

£ AM antenna (Except for U.K., Europe, Russia

and Australia models)

£ FM antenna (Except for U.K., Europe, Russia

and Australia models)

* One of the above is supplied depending on

the region of purchase.

£ DAB/FM antenna (U.K., Europe, Russia and

Australia models)

£ YPAO microphone

£ Power cable £ Remote control

* The supplied power cable varies depending

on the region of purchase.

£ Batteries (AAA, R03, UM-4) (x2)

£ Quick Start Guide

NOTE

Access the Yamaha Downloads site to download the latest Owner's Manual and Quick Start Guide.

http://download.yamaha.com/

En

8

Using the remote control

Insert the batteries in the remote control

Insert the batteries the right way round.

Operating range of the remote control

Point the remote control at the remote control sensor on the unit and remain within the

operating range shown in the following figure.

Within 6 m (20 ft)

30° 30°

En

9

FEATURES

What you can do with the unit

Supporting 2- to 7.1-channel

speaker system

According to the number of speakers that you are

using, you can enjoy your favorite acoustic spaces in

various styles.

• “Using 7.1/5.1.2-channel system” (p.21)

• “Using 5.1.2-channel system” (p.22)

• “Using 7.1-channel system” (p.23)

• “Using 5.1-channel system” (p.24)

• “Using 3.1.2-channel system” (p.25)

• “Using Virtual CINEMA FRONT” (p.26)

• “Playing back music in multiple rooms” (p.55)

Automatically optimizing the

speaker settings (YPAO)

YPAO function detects speaker connections, measures

the distances from them to your listening positions by

using YPAO microphone measurement, and then

automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your

room (YPAO: Yamaha Parametric room Acoustic

Optimizer).

• “Optimizing the speaker settings automatically

(YPAO)” (p.42)

Enjoying sound field effects with

much presence

The unit is equipped with a variety of sound programs

and surround decoders that allow you to enjoy

playback sources with your favorite sound mode (such

as sound field effect or stereo playback).

• “Enjoying 3D sound fields (CINEMA DSP

3D)” (p.49)

• “Enjoying sound field effects optimized for the type of

content”

(p.50)

• “Enjoying sound field effects without surround

speakers (Virtual CINEMA DSP)” (p.50)

•

“Enjoying surround sound with headphones (SILENT

CINEMA)” (p.50)

• “Enjoying original sound (straight decode)” (p.51)

• “Enjoying multichannel playback without sound field

effects (surround decoder)”

(p.51)

• “Enjoying pure high fidelity sound (Pure

Direct)”

(p.52)

• “Enhancing the bass (Extra Bass)”

(p.53)

• “Playing back digitally compressed formats with

enriched sound (Compressed Music

Enhancer)”

(p.53)

•

“Enjoying Dolby Atmos

®

and DTS:X™” (p.54)

Wide variety of supported

content via network

When the unit is connected to a network, you can enjoy

the various kinds of content via network on the unit.

• “Playback of iTunes/iPhone music contents with

AirPlay” (p.82)

• “Playing back music stored on media servers (PCs/

NAS)” (p.84)

• “Selecting an Internet radio station” (p.86)

• “Listening to a streaming service” (p.87)

Playing back content of various

devices

A number of HDMI jacks and various input/output jacks

on the unit allow you to connect video devices (such as

BD/DVD players), audio devices (such as CD players),

Bluetooth devices (such as smartphones), game

consoles, USB storage devices, and other devices. You

can play back content of them.

• “Selecting a frequency for reception” (p.65)

• “Playback Bluetooth

®

device music on the

unit”

(p.

80

)

• “Playback of USB storage device contents” (p.83)

En

10

Useful functions

The unit is equipped with the various useful functions.

The SCENE function allows you to select the input

source and settings registered to the corresponding

scene, such as sound program and Compressed

Music Enhancer on/off, with just one touch. When the

unit is connected to an HDMI Control-compatible TV

with an HDMI cable, you can control the unit (such as

power and volume) with TV remote control operations.

• “Selecting the input source and favorite settings with

one touch (SCENE)”

(p.

88)

•

“Registering a favorite content as shortcut”

(p.91)

•

“HDMI Control and synchronized

operations”

(p.190)

• “Audio Return Channel (ARC)”

(p.191)

Additional Features

The unit is equipped with the function connected with

speakers wirelessly. You can enjoy audio played back

on the unit using Bluetooth speakers/headphones.

Also, using devices that support the MusicCast

Surround function, the surround speakers and

subwoofer can be wireless.

• “Enjoying audio using Bluetooth

®

speakers/

headphones” (p.81)

• “Using wireless surround speakers (MusicCast

Surround function)” (p.171)

Useful applications

Application: “AV SETUP GUIDE”

AV SETUP GUIDE is an application that assists

you with cable connections between AV Receiver

and playback devices as well as AV Receiver

setup. This app guides you through the various

settings such as speaker connections, TV and

playback device connections and selecting the

speaker system.

For details, search for “AV SETUP GUIDE” on the App

Store or Google Play.

Application: “AV CONTROLLER”

AV CONTROLLER is an application that assists

you with various operations of AV Receiver

without the remote control. This app allows you

not only to control the unit’s power and volume

but also to select the input source and start/stop

playback.

For details, search for “AV CONTROLLER” on the App

Store or Google Play.

Application: "MusicCast

CONTROLLER"

MusicCast CONTROLLER is an application that

allows you to link a MusicCast compatible device

to other MusicCast compatible devices in other

rooms and play them back simultaneously. This

app lets you use your smartphone or other mobile

device instead of the remote control to easily

select music to play back as well as configure the

unit and MusicCast compatible devices.

For details, search for “MusicCast CONTROLLER” on

the App Store or Google Play.

En

11

Part names and functions

Part names and functions of the front panel

The part names and functions of the front panel are as follows.

CONTROL

INPUT

SCENE

MAIN ZONE

PHONES

SILENT

CINEMA

STRAIGHT

PURE DIRECT

AUDIO

VOLUME

TONE

PROGRAM

YPAO MIC

2

1

3

4

INFO

(

WPS

)

ZONE 2

ZONE CONTROL

MEMORY

PRESET

FM AM

TUNING

(CONNECT)

5V 1A

USB AUX

C D F HE G J K LI

2

A5 6

431 987

B0

(U.S.A. model)

1

MAIN ZONE z key

Turns on/off (standby) the unit.

2

Standby indicator

Lights up when the unit is in standby mode under any of

the following conditions.

• HDMI Control is enabled (p.129)

• Standby Through is enabled (p.130)

• Network Standby is enabled (p.132)

• Bluetooth Standby is enabled (p.135)

3

ZONE 2 key

Enables/disables the audio output to Zone2 (p.58).

4

ZONE CONTROL key

Changes the zone (main zone or the Zone2) that is

controlled by the keys and knobs on the front panel

(p.58).

5

INFO (WPS) key

Selects the information displayed on the front display

(p.61).

Enters the wireless LAN connection setup (WPS button

configuration) by holding down for a few seconds (

p.174).

6

MEMORY key

Registers radio stations as preset stations (p.66

).

Registers Bluetooth, USB, or network content as a shortcut

by holding down for a few seconds (p.

91).

7

PRESET keys

Select a preset radio station (

p.66).

Recall Bluetooth, USB, or network content that is registered

as a shortcut (

p.92).

8

FM and

AM keys (Except for U.K., Europe, Russia and

Australia models)

FM and DAB keys (U.K., Europe, Russia and Australia

models)

Switch between FM and AM (p.65) or FM and DAB

(p.70).

9

Front display

Displays information (p.14).

:

TUNING keys

Select the radio frequency (p.65).

A

Remote control sensor

Receives remote control signals (p.9).

B

PURE DIRECT key

Enables/disables the Pure Direct (p.52).

En

12

C

INPUT knob

Select an input source.

D

PHONES jack

For connecting headphones.

E

YPAO MIC jack

For connecting the supplied YPAO microphone (p.42).

F

TONE CONTROL key

Adjusts the level of high-frequency range (Treble) and low-

frequency range (Bass

) individually (p.95).

G

SCENE keys

Switch with one touch between multiple settings set using

the SCENE function. Also, turns on the unit when it is in

standby mode (p.88).

H

PROGRAM keys

Select a sound program or a surround decoder (

p.49).

I

STRAIGHT (CONNECT) key

Enables/disables the straight decode mode (p.51).

Enters the MusicCast network addition and the wireless

LAN setup by holding down for 5 seconds (p.

48).

J

USB jack

For connecting a USB storage device (p.

83).

K

AUX jack

For connecting devices, such as portable audio players

(p.33).

L

VOLUME knob

Adjusts the volume.

En

13

Part names and functions of the front display

The part names and functions of the front display are as follows.

A

-

R

es

Hi

3 B

SB

ENHANCER

ECO

OUT

A

-

DRC

SLEEP

STEREO

TUNED

VOL.

SL

SW

SR

SBL SBR

MUTE VIRTUAL

ZONE

LINK

MASTER

FPRFPL

2

PARTY

YPAO

VOL.

1 5 7

0342 A B6 8

DC DG HFE I

9

J

1

HDMI

Lights up when HDMI signals are being input or output.

OUT1/OUT2

Indicates the HDMI OUT jacks currently outputting an

HDMI signal.

2

LINK MASTER

Lights up when the unit is the master device of the

MusicCast network.

3

Firmware update indicator

Lights up when a firmware update is available via the

network.

4

Bluetooth indicator

Light up while the unit is connected to a Bluetooth device.

5

CINEMA DSP

Lights up when CINEMA DSP 3D (p.49) is working.

6

SLEEP

Lights up when the sleep timer is on.

7

STEREO

Lights up when the unit is receiving a stereo FM radio

signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station

signal.

8

PARTY

Lights up when the party mode (p.59) is enabled.

9

ZONE2

Lights up when audio output to Zone2 (p.58) is enabled.

:

A-DRC

Lights up when Adaptive DRC (p.96) is working.

A

Volume indicator

Indicates the current volume.

B

VIRTUAL

Lights up when the virtual processing is working (p.49) .

C

ECO

Lights up when the eco mode (p.148) is enabled.

D

Cursor indicators

Indicate the remote control cursor keys currently

operational.

E

Information display

Displays the current status (such as input name and sound

mode name). You can switch the information by pressing

INFO (p.

61).

F

Wireless LAN indicator

Light up while the unit is connected to a wireless network

(p.173).

NOTE

This indicator may light up when the unit is added to the

MusicCast network. For details, see “Adding the unit to the

MusicCast network” (p.48).

G

ENHANCER

Lights up when Compressed Music Enhancer (p.53) is

working.

H

YPAO VOL.

Lights up when YPAO Volume (p.95

) is enabled.

I

Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

H Surround back speaker (L)

J Surround back speaker (R)

B Presence speaker (L)

N Presence speaker (R)

L Subwoofer

J

MUTE

Blinks when audio is temporarily muted.

En

14

Part names and functions of the rear panel

The part names and functions of the rear panel are as follows.

ANTENNA

FM

AM

AUDIO 4

AUDIO 5

OPTICAL

COAXIAL

COMPONENT VIDEO

COAXIAL

AUDIO 1

AUDIO 2

AUDIO 3

AV 1 AV 2

PB

Y

PR

HDMI (

HDCP2.2

)

11 2

1

2

3 4 5

ARC

2

SURROUND CENTER FRONT

SURROUND BACK

/

ZONE2

/

BI-AMP

/

ZONE2

SPEAKERS

VIDEO

SUBWOOFER

PRE OUT

TRIGGER OUT

REMOTE

12V

IN

OUT

0.1A

F.PRESENCE

EXTRA SP1

EXTRA SP2

HDMI

OUT

AC IN

NETWORK

PHONO

GND

HDCP2.2

( )

FRONT

ZONE OUT

ZONE 2

(1 MOVIE) (5 STB) (6 GAME)

( 2 RADIO )

( 7 TV )

( 3 MUSIC )

(4 NET RADIO)

(8 SERVER)

dba

e g h

i

c c

f

jk m nl o

(U.S.A. model)

▪ The area around the video/audio output jacks is marked in white

on the actual product to prevent improper connections.

1

REMOTE IN/OUT jacks

For connecting to an infrared signal receiver/emitter that

allows you to operate the unit and other devices from

another room (

p.57).

2

TRIGGER OUT

jack

For connecting to a device that supports the trigger

function (p.38).

3

Wireless antennas

For a wireless (Wi-Fi) connection to a network (

p.173) and

a Bluetooth connection (p.80).

4

HDMI OUT 1–2 jacks

For connecting to HDMI-compatible TVs and outputting

video/audio signals (p.30). When using ARC, TV audio

signal can also be input through the HDMI OUT 1 jack.

5

HDMI 1–5 jacks

For connecting to HDMI-compatible playback devices and

inputting video/audio signals (p.31).

6

ANTENNA jacks

For connecting to the radio antennas (p.34).

7

NETWORK

jack

For a wired connection to a network (p.36).

8

VOLTAGE SELECTOR

(Central and South America model only)

Selects the switch position according to your local voltage

(p.39).

9

AC IN jack

For connecting the supplied power cable (p.39).

:

AV jacks

AUDIO jacks

For connecting to video/audio playback devices and

inputting video/audio signals (

p.32).

A

PHONO jacks

For connecting to a turntable (p.32).

B

ZONE OUT jacks

For connecting to the external amplifier used in Zone2 and

for outputting audio (p.57).

C

PRE OUT

jacks

For connecting to an external power amplifier (p.37).

D

SUBWOOFER jack

For connecting to a subwoofer (with built-in amplifier)

(p.20).

E

SPEAKERS terminals

For connecting to speakers (p.17).

En

15

Part names and functions of the remote control

The part names and functions of the supplied remote control are as follows.

PRESET

BAND TUNINGTUNING

MEMORY

RED GREEN

YELLOW

BLUE

POP-UP

/MENU

HOME

TOP

MENU

VOLUME

BLUETOOTH

NET USBTUNER

INPUT

PROGRAM

SUR. DECODE

BASS

ENHANCER

PURE DIRECT

STRAIGHT

SCENE

4321

8765

HDMI OUT

PARTY

SLEEP

MAIN

ZONE 2

PRESET

BAND

TUNING

MEMORY

RED

GREEN

YELLOW

BLUE

POP-UP

/MENU

HOME

TOP

MENU

VOLUME

BLUETOOTH

NET

USB

TUNER

INPUT

PROGRAM

SUR. DECODE

BASS

ENHANCER

PURE DIRECT

STRAIGHT

SCENE

4

3

2

1

8

7

6

5

HDMI OUT

PARTY

SLEEP

MAIN

ZONE 2

PRESET

BANDBAND TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

RED GREEN

YELLOW

BLUE

POP-UP

/MENU

HOME

TOP

MENU

VOLUME

BLUETOOTH

NET USBTUNER

INPUT

PROGRAM

SUR. DECODE

BASS

ENHANCER

PURE DIRECT

STRAIGHT

SCENE

4321

8765

HDMI OUT

PARTY

SLEEP

MAIN

ZONE 2

q

r

s

o

p

c

b

d

e

h

f

i

l

j

g

m

a

n

k

1

Remote control signal transmitter

Transmits infrared signals.

2

z (receiver power) key

Turns on/off (standby) the unit.

3

MAIN/ZONE 2 switch

Changes the zone that is controlled by the remote control

(p.58).

4

SLEEP key

Pressing this key repeatedly will specify the time (120 min,

90 min, 60 min, 30 min, off), in which the unit switches to

the standby mode.

5

PARTY key

Turns on/off the party mode (p.59).

6

SCENE keys

Switch with one touch between multiple settings set using

the SCENE function. Also, turn on the unit when it is in

standby mode (p.

88).

7

Input selection keys

Select an input source for playback.

NOTE

Presses NET repeatedly to select a desired network source.

8ADGHI External device operation keys

Let you perform playback operations when “USB” or “NET”

is selected as the input source, or control playback of the

HDMI Control-compatible playback device.

NOTE

The playback devices must support HDMI Control. Some HDMI

Control-compatible devices cannot be used.

8

PRESET keys

Select a preset radio station (p.66).

Recall Bluetooth, USB, or network content that is registered

as a shortcut (

p.92).

9

OPTION key

Displays the option menu (

p.93).

:

SETUP key

Displays the setup menu (p.104).

A

ENTER/Cursor, RETURN keys

Operates the menu.

B

HELP key

In the on-screen menu, the description of a term in the

cursor position appears on the TV. This key is enabled

when the “?” icon is displayed on the on-screen menu.

C

Sound mode keys

Select a sound mode (p.49).

D

Playback operation keys

Controls playback of the external device.

E

HDMI OUT key

Selects HDMI OUT jacks to be used for video/audio output

(p.

61).

F

PURE DIRECT key

Enables/disables the Pure Direct (

p.52).

H

VOLUME keys

Adjust the volume.

I

MUTE key

Mutes the audio output.

En

16

PREPARATIONS

1 Connecting speakers

Names and functions of speakers

The names and functions of speakers connected to the unit are as follows.

4

1

2

9 9

E R

5

6 7

3

10° to 30° 10° to 30°

0.5 to 1 m

(1.6 to 3.3 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

1.8 m (5.9 ft) 1.8 m (5.9 ft)

0.3 m (1 ft) or more

NOTE

Use this diagram as a reference for the ideal speaker layout for the unit. Your speaker layout does not need

to match the diagram exactly, since the YPAO function can be used to automatically optimize the speaker

settings (such as distances) to suit the actual speaker layout.

Speaker type Abbr. Function

Front (L/R)

1/2

Produce front channel sounds (stereo sounds).

Center

3

Produces center channel sounds (such as movie dialogue

and vocals).

Surround (L/R)

4/5

Produce surround channel sounds. Surround speakers

also produce surround back channel sounds when no

surround back speakers are connected.

Surround back (L/R)

6/7

Produce surround back channel sounds.

Presence (L/R)

E/R

Produce CINEMA DSP 3D effect sounds or heights

channel sounds of Dolby Atmos and DTS:X contents.

Subwoofer

9

Produces LFE (low-frequency effect) channel sounds and

reinforces the bass parts of other channels.

NOTE

The unit provides three layout patterns for presence speakers. You can choose a layout pattern that suits

your listening environment.

▪ Front Height

▪ Overhead

▪ Dolby Enabled SP

En

17

Speaker systems and speakers to be connected

Select the speaker layout for the number of speakers that you are using and place the

speakers and subwoofer in your room.

Speaker type

Speaker system

(the number of channels)

7.1/5.1.2 5.1 2.1

Front (L/R) 1/2

  

Center 3

 

Surround (L/R) 4/5



*3

Surround back (L/R) 6/7

*1

Presence (L/R) E/R

*2 *4

Subwoofer 9

  

If you have nine speakers, you can use the both surround back speakers and

presence speakers. In this case, the unit automatically changes the speakers to be

used, depending on the input signal and CINEMA DSP.

If you have seven speakers, use two of them as surround back speakers (*1) or

presence speakers (*2).

If you have five speakers, use two of them as surround speakers (*3) or presence

speakers (*4).

NOTE

▪ “5.1.2-channel” denotes “standard 5.1-channel plus 2 for overhead speaker channels”.

▪ When using surround back speakers, be sure to connect the surround back left and right speakers. Using

only one surround back speaker was discontinued.

▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit.

Speaker requirements

Speakers and subwoofers to be connected to the unit must meet the following

requirements:

• Under its default settings, the unit is configured for 8-ohm speakers. When

connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For

details, see the following:

– “Setting the speaker impedance” (p.19)

• Use a subwoofer with built-in amplifier.

NOTE

▪ Prepare the number of speakers according to your speaker system.

▪ Be sure to connect the front left and right speakers.

En

18

Setting the speaker impedance

Under its default settings, the unit is configured for 8-ohm speakers. When connecting

6-ohm speakers, set the speaker impedance to “6 Ω MIN”.

1

Before connecting speakers, connect the power cable to an AC

wall outlet.

2

While holding down STRAIGHT on the front panel, press MAIN

ZONE z.

(MAIN ZONE)

z

STRAIGHT

3

Check that “SP IMP.” is displayed on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SL

SW

SR

SBL SB SBR

FPL

MUT E VIR TUAL

SP IMP.••8¬MIN

4

Press STRAIGHT to select “6 Ω MIN”.

5

Press MAIN ZONE z to set the unit to standby mode and remove

the power cable from the AC wall outlet.

You are now ready to connect the speakers.

Cable requirements

Use the following types of commercially-available cables to connect speakers to the

unit:

Speaker cables (the number of speakers

required)

Audio pin cable (for connecting a subwoofer)

–

+

–

+

How to connect speakers

n

Connecting the speaker

Connect a speaker cable between the negative (–) terminal of the unit and the

negative (–) terminal of the speaker, and between the positive (+) terminal of the unit

and the positive (+) unit of the speaker.

NOTICE

When connecting the speaker cables, take notice of the following:

▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into

the unit's interior which could result in a short circuit or malfunction of the unit.

▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the

speakers.

– Twist the bare wires of the speaker cables firmly together.

– Do not let the bare wires of the speaker cable touch one another.

– Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel

and screws).

En

19

NOTE

▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers.

▪ Be sure to connect the front left and right speakers.

▪ Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers,

set the unit’s speaker impedance to “6 Ω MIN”. For details, see the following:

– “Setting the speaker impedance” (p.19

)

1

Remove approximately 10 mm (3/8”) of insulation from the ends of

the speaker cable, and twist the bare wires of the cable firmly

together.

2

Loosen the speaker terminal.

3

Insert the bare wires of the cable into the gap on the side (upper

right or bottom left) of the terminal.

4

Tighten the terminal.

FRONT

aa

b

d

c

+ (red)

- (black)

This completes the connection.

NOTE

▪ If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then

confirm that the speaker cables are not short circuited.

▪ (U.S.A., Canada, China, and Central and South America models only)

When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the

terminal.

FRONT

a

b

Banana plug

n

Connecting the subwoofer

Use an audio pin cable to connect the subwoofer.

NOTE

Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the

subwoofer.

ZONE OUT

ZONE 2

2

1

SUBWOOFER

PRE OUT

FRONT

Audio pin cable

En

20

La page charge ...

Yamaha RX-A780 Le manuel du propriétaire

Yamaha RX-A780 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents