Honeywell Confidential and Proprietary
USER MANUAL
HWB11AC-PRT, WIFI & BT Module
ORPORATE GRAPHICS AN D COMMUNICATIONS
Administrative Style Sheet Guide
Graphic Design Institute
12345 Main Street • Suite 100
Revision
1
MODEL NO: HWB11AC-PRT
802.11a/b/g/n/ac
+
BT 5.0
System on Module
Table of Contents
1. Introduction ..................................................................... 1
2. Block Diagram ................................................................. 3
3. Technical Specifications .................................................. 4
Recommended Operating Condition ............................................... 4
4. Footprint, Front & Back view ........................................... 5
5. Pin Configurations of Module .......................................... 6
6. Wireless Specifications ................................................... 7
WLAN .............................................................................................. 7
BLUETOOTH .................................................................................. 7
WLAN Radio Specifications ............................................................ 8
IEEE Specifications ......................................................................... 8
Wi-Fi 2.4 GHz Power Table (FCC/IC) ............................................. 8
Wi-Fi 5 GHz Power Table (FCC/IC) ................................................ 9
Wi-Fi 2.4 GHz Power Table (ETSI) ................................................. 9
Wi-Fi 5 GHz Power Table (ETSI) .................................................. 10
BT & BLE 2.4GHz (ETSI & FCC/IC).............................................. 10
BLUETOOTH Radio Characteristics ............................................. 11
7. Antenna Type & Specifications ..................................... 12
8. RF Layout & Design Guidelines .................................... 14
RF Layout & Design Guidelines .................................................... 14
9. Agency Approvals ......................................................... 15
10. Labelling Guidelines for Products .................................. 16
1
FCC ID: HD5-HWB11
IC: 1693B-HWB11
Model Name: HWB11AC-PRT
1. Introduction
This document specifies the details for a WiFi 802.11a/b/g/n/ac with BT5.0 module called with Honeywell
Part No.
50180228-001
RFSOM WBT, SOM MODULE, WIFI 802.11AC BT 5.0 - NA
50180227-001
RFSOM WBT, SOM MODULE, WIFI 802.11AC BT 5.0 - ROW
This HWB11AC-PRT module is a Wi-Fi/BT system on module which will be placed inside the Honeywell products
like printers, barcode scanners, RFID readers etc. To enable wireless connectivity. This module includes MAC &
physical layer of 802.11a/b/g/n/ac and the Bluetooth modem.
This module operates on 5.0V DC Power supply with internal on-board regulation to generate 3.3v for powering
ON all the circuits. The entire RF circuits is enclosed in RF shield of dimension 25mm X 25mm.
The module uses internal power amplifier and LNA for 2.4GHz frequency band and an external front end chip for
5GHz frequency band. All filters and diplexers are included in the module to ensure maximum power flatness and
optimum VSWR. The module has one antenna chain for 1X1 output.
The module supports range of data rates from 1Mbps in 802.11b mode to MCS9 in 802.11ac mode. This chipset
also supports concurrent operation of Bluetooth (Version5.0) for wireless connectivity during browsing or other
device applications. Along with both standard and high speed (HS) Bluetooth data rates, Bluetooth low energy
modes are also supported. Hardware WAPI acceleration engine, AES, TKIP, WPA and WPA2 are supported to
provide the latest security requirement on your network.
The Device communicates with HOST using SDIO interface for WIFI and UART interface for BLUETOOTH.
Chapter
1
2
HWB11AC-PRT – System on Module Features
• IEEE 802.11 a/b/g/n/ac WLAN
• Bluetooth 5.0 + HS
• Bluetooth-WLAN coexistence
• WiFi Wake on Wireless (WoW)
• 20/40 MHz bandwidth at 2.4GHz
• 20/40/80 MHz bandwidth at 5GHz
• Internal PA/LNA
• Module Size: 80 mm x 37 mm x 18mm, (LxWxH) Board
• 802.11d/e/h/i/k/r
• Low Current consumption in IEEE PS and Deep Sleep
• WiFi Security methods: OPEN, WEP, WPA2-PSK, WPA2-1X
PEAP-MSCHAPV2, PEAP-TLS, EAP-TTLS)
3
2. Block Diagram
HWB11AC-PRT module is designed based on Qualcomm QCA6174A chipset solution. It supports generic SDIO,
UART interface to connect the WLAN/BT to the host processor. A simplified block diagram of the HWB11AC-PRT
module is depicted in above picture.
Chapter
2
4
3. Technical Specifications
Recommended Operating Condition
Operating Temperature:
-20° to 60°C
Humidity
Max 95% (Non-condensing, relative humidity)
Storage Temperature:
- 30° to +70°C
Power Supply:
+5.0V DC, 0.5A
I/O Voltage levels
3.3v for Digital IOs, 1.8v for SDIO stream
Current Consumption
Tx output power @ 19 dBm on 11b 1M (single stream): 420mA (typ)
Tx output power @ 15 dBm on 11n MCS0_HT20 (single stream-5g):
470mA (typ)
Chapter
3
5
4. Footprint, Front & Back view
Bottom View of HWB11AC-PRT Module
Top View of HWB11AC-PRT Module
Chapter
4
6
5. Pin Configurations of Module
S No
PINOUT
Signal Type
1
GND
Ground
2
GND
Ground
3
BT_UART_CTS_3V3
Input/Output
4
1.8V Dig I/O PS
Input/Output
5
BT_UART_RTS_3V3
Input/Output
6
BT_HOST_WAKE_3V3
Input/Output
7
BT_UART_TX_3V3
Input/Output
8
EEPROM_SDA
Input/Output
9
BT_UART_RX_3V3
Input/Output
10
EEPROM_SCL
Input/Output
11
BT_EN_3V3
Input/Output
12
WIFI_WAKE_ON_3V3
Input/Output
13
GND
Ground
14
WL_EN_3V3
Input/Output
15
GND
Ground
16
SDIO_CLK
Input/Output
17
GND
Ground
18
SDIO_D3
Input/Output
19
GND
Ground
20
SDIO_D2
Input/Output
21
GND
Ground
22
SDIO_D1
Input/Output
23
GND
Ground
24
SDIO_D0
Input/Output
25
GND
Ground
26
SDIO_CMD
Input/Output
27
5.0v DC Power Supply
5.0v DC Power Supply
28
5.0v DC Power Supply
5.0v DC Power Supply
29
GND
Ground
30
GND
Ground
Chapter
5
7
6. Wireless Specifications
WLAN
The HWB11AC-PRT module complies with the following features and standards.
Features
Description
WLAN Standards
IEEE 802 11a/b/g/n/ac
Antenna Port
Support 1 streaming with Ant 0 (Ant1 is disabled)
Frequency Band
2.400 GHz – 2.484 GHz
4.900 GHz – 5.835 GHz*
Number of Sub
Channels
1~ 11Channels
36~ 48,52~ 64, 100~ 140, 149~ 165 Channels
Modulation
DSSS, CCK, OFDM, BPSK, QPSK,16QAM, 64QAM
Supported data rates
1, 2, 5.5, 11 (Mbps)
6, 9, 12, 18, 24, 36, 48, 54 (Mbps)
HT20_MCS0 ~ HT20_MCS7
VHT80_MCS0 ~ VHT80_MCS9
*Note: Band 5600 MHz to 5650 MHz is not supported for Canada
BLUETOOTH
The Radio specification is compliant with the Bluetooth 5.0 + EDR specification
Features
Description
Frequency Band
2400 MHz ~ 2483.5 MHz
Number of Channels
79 channels
Modulation
FHSS (Frequency Hopping Spread Spectrum), GFSK, DPSK
Supported data rates
BLE -1Mbps
BT – 1Mbps, 2Mbps, 3Mbps
Antenna Port
Single Antenna for Wi-Fi and BT
Chapter
6
8
WLAN Radio Specifications
IEEE Specifications
WiFi TX EVM follow the IEEE spec that as list in the table below:
Characteristics
IEEE Spec
Unit
RF Average Output EVM (11b)
@1 Mbps
35
%
@11 Mbps
35
%
RF Average Output EVM (11a/g)
@6 Mbps
-5
dB
@54 Mbps
-25
dB
RF Average Output EVM (11n)
@ MCS0
-5
dB
@ MCS7
-27
dB
RF Average Output EVM (11ac)
@ MCS0
-5
dB
@ MCS9
-32
dB
Wi-Fi 2.4 GHz Power Table (FCC/IC)
9
Wi-Fi 5 GHz Power Table (FCC/IC)
Note: Band 5600 MHz to 5650 MHz is not supported for Canada
Wi-Fi 2.4 GHz Power Table (ETSI)
10
Wi-Fi 5 GHz Power Table (ETSI)
BT & BLE 2.4GHz (ETSI & FCC/IC)
11
The HWB11AC-PRT module 2.4GHz Wi-Fi Sensitivity as list in the table below:
Receiver Characteristics
Typ.
Max.
Unit
PER <8%, Rx Sensitivity @ 1 Mbps
-97
-82
dBm
PER <8%, Rx Sensitivity @ 11 Mbps
-89
-76
dBm
PER <10%, Rx Sensitivity @ 6 Mbps
-91
-82
dBm
PER <10%, Rx Sensitivity @ 54 Mbps
-76
-65
dBm
PER <10%, Rx Sensitivity @ MCS0_HT20
-91
-82
dBm
PER <10%, Rx Sensitivity @ MCS7_HT20
-73
-64
dBm
The HWB11AC-PRT module 5GHz Wi-Fi Sensitivity as list in the table below:
Receiver Characteristics
Typ.
Max.
Unit
PER <10%, Rx Sensitivity @ 6 Mbps
-94
-82
dBm
PER <10%, Rx Sensitivity @ 54 Mbps
-78
-65
dBm
PER <10%, Rx Sensitivity @ MCS0_HT20
-93
-82
dBm
PER <10%, Rx Sensitivity @ MCS7_HT20
-75
-64
dBm
PER <10%, Rx Sensitivity @ MCS0_VHT80
-87
-76
dBm
PER <10%, Rx Sensitivity @ MCS7_VHT80
-62
-51
dBm
BLUETOOTH Radio Characteristics
Parameter
Conditions
Min.
Typ.
Max
Unit
Basic Rate
Output Power
Average Power
8
9
10
dBm
Frequency Range
2400
…
2483.5
MHz
Sensitivity (BER)
BER ≦0.1%
-92
-70
dBm
Maximum Input Level
BER ≦0.1%
-20
dBm
EDR
Relative Power
π/4-DQPSK
-4
0
1.0
dBm
8DPSK
-4
0
1.0
dBm
EDR Sensitivity (BER)
π/4-DQPSK
…
-91
-70
dBm
BER ≦0.01%
8DPSK
…
-86
-70
dBm
BER ≦0.01%
BLE
BLE Output Power
Average Power
-4
2
6
dBm
BLE Sensitivity (PER)
PER ≦30.8%
…
-95
-70
dBm
BLE Maximum Input Level
PER ≦30.8%
…
…
-10
dBm
12
7. Antenna Type & Specifications
Module to be used with Antenna part no: MAF94367, Make: Laird Technologies
Honeywell part no: 805-833-001
Chapter
7
13
This radio transmitter [IC:1693B-HWB11] has been approved by Innovation, Science and Economic Development
Canada to operate with the antenna types listed above, with the maximum permissiblegain indicated. Antenna
types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly
prohibited for use with this device.
— Le présent émetteur radio [IC:1693B-HWB11] a été approuvé par Innovation, Sciences et Développement
économique Canada pour fonctionner avec les types d'antenne énumérés cidessous et ayant un gain admissible
maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué
pour tout type figurant sur la liste, sont trictement interdits pour l'exploitation de l'émetteur
14
8. RF Layout & Design Guidelines
RF Layout & Design Guidelines
I. Do not run antenna cables directly above or directly below the radio module.
II. Do not run any high-speed digital lines below the radio.
III. Use proper electro-static-discharge (ESD) procedures when installing the HWB11AC-PRT module.
IV. Use non-conductive labels and to be pasted over the EMI shield provided on the module.
Chapter
8
15
9. Agency Approvals
FCC:
Model: HWB11AC-PRT
FCC ID: HD5-HWB11
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee
that interference will not occur in a installation. If this equipment does cause harmful interference to radio or
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that my cause undesired
operation.
Caution:
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the device.
INSTALL & OPERATION: The equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Chapter
9
16
Industry Canada
Model: HWB11AC-PRT
IC: 1693B-HWB11
This device complies with Industry Canada RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of
the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Leprésent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio
Exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement."
Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps.
Note:
Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations only.
Dans la bande de 5,15 à 5,25 GHz, les appareils UNII seront restreints aux opérations intérieures.
10. Labelling Guidelines for Products
The proposed FCC IC label format is to be placed on the module. If it is not visible when the module is
installed into the system, “Contains FCC ID: HD5-HWB11, Contains IC:1693B-HWB11” shall be placed on
the outside of final host system.
Étiquetage le format proposé de l'étiquette IC de fac doit être placé sur le module.Si le module n'est pas
visible lorsqu'il est installé dans le système, contenant l'ID FCC ID: HD5-HWB11, contenant l'IC: 1693B-
HWB11 doit être placé à l'extérieur du système hôte final.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Honeywell HWB11 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Honeywell HWB11 User manual
Documents connexes
Autres documents
-
Intermec IM11 Integration Manual
-
Yealink YL430132 Manuel utilisateur
-
Eurotech DynaGATE 10-12 Le manuel du propriétaire
-
-
-
-
Eurotech ReliaGATE 10-12 Le manuel du propriétaire
-
-
-