Directed DS4 OEM Le manuel du propriétaire

©

GDS4OEM 590-10131 (R1.0)

OWNER’S GUIDE

Remote Start & Security Systems

Redeﬁning the Ultimate Control

TM

Directed Electronics is committed

to delivering world class quality

products and services that excite

and delight our customers.

Vista, CA 92801

www.directed.com

Featuring DS4 Technology

Technologie DS4 Intégrée

OEM

Remote

The company behind Autostart

®

Systems is Directed Electronics.

Autostart was one of the first to

design and build remote control

vehicle starters. Over the years,

a continuing commitment to

quality and reliability has allowed

Autostart to gain a respected

reputation as a high-end designer

of remote start and security

systems. Today, Autostart

continues to set standards in the

industry.

Call (800) 876-0800 for more

information about our products

and ser vic es.

OEM Remote Owner’s Guide

GDS4OEM 500-10770-01 (R1.0)

Congratulations

Congratulations on the purchase of your state-of-the-art

Directed Digital System. Reading this Owner’s Guide prior

to using your system will help maximize the use of its many

features. For more information please visit us online (see

back cover for URL). For any additional questions please

contact your authorized Directed dealer or Directed at

1-800-753-0600. Additional support is also available at:

http://support.directed.com.

Important information

Government regulations and safety information

Read the

Government regulations

and

Warning!

Safety first

sections of this manual prior to operating

this system.

Warning!

Failure to heed this information can

result in death, personal injury or property damage

and may also result in the illegal use of the system

beyond its intended purpose.

Your warranty

Your system comes with a warranty. The warranty terms are

detailed at the end of this guide. Make sure that you receive the

proof of purchase from your dealer, indicating the product was

installed by an authorized Directed dealer.

GDS4OEM 500-10770-01 (R1.0)

Contents

Congratulations ............................................................................. iii

Important information ..................................................................... iii

Government regulations and safety information ................... iii

Your warranty...................................................................iii

Sending commands to your vehicle ...................................................1

Control center .................................................................................1

Vehicle takeover ..............................................................................2

Get In and Go ................................................................................3

Valet mode .....................................................................................3

Remote start valet mode ......................................................3

Alarm/security valet mode ..................................................4

Startup diagnostics .......................................................................... 6

SmartStart compatible .....................................................................6

What is SmartStart? ...........................................................6

Take advantage of all these great phone control features! .......7

Pairing your smartphone to the system ..................................7

Engine Idle Protection System (EIPS) .................................................. 8

Patent information ........................................................................... 9

Government regulations .................................................................10

Warning! Safety first .....................................................................12

Limited lifetime consumer warranty ................................................. 15

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the

doors or pop the trunk, there are 3 possible ways you can send

commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by either

pressing the Lock button 3 times quickly or by pressing Lock,

Unlock, and Lock quickly on your factory remote. Check with

your installer to ﬁnd out which method is conﬁgured in your

vehicle.

Control center

Your system comes with a control center. Check with your installer

for the location in the vehicle. The LED gives the system status

indication, and the control center button is used for putting the

system into valet mode and for pairing your smartphone.

Control Center

Button

LED

Vehicle takeover

1

Close the vehicle doors, hood and trunk,

then send the Remote Start command to start

the vehicle.*

14:36

Press Remote

Start button*

2

Send the Unlock command on the factory or

aftermarket remote.*

14:36

Press Unlock on

either remote*

Complete the following steps within 45 seconds or the vehicle

will shut down.

3

Enter the vehicle.

Note: In a PTS vehicle, make sure the factory

remote is inside with you.

Enter

vehicle

4

Insert your key in the ignition barrel and turn

it to the ON position.

OR

Press the PTS button twice.

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

OR

5

Depress the brake pedal, put the car

in gear and drive off.

Ready to

drive off

* Icon and remote appearance may differ depending on the model pur-

chased.

Get In and Go

Note

: Check with your installer if Get In and Go is available on

your vehicle, as this feature is not available on all vehicles.

Get In and Go is designed to provide users with easy takeover

when entering their Push-to-Start (PTS) equipped vehicle, once it

has been remote started.

With Get In and Go, you simply remote start the vehicle, unlock

the doors, get in and go... All that is left to do is put the gear in

drive and drive off.

Valet mode

Your system is equipped with two valet modes that will disable

security and/or remote start features. Each mode can be turned

on and off individually using the vehicle ignition and control

center button.

Remote start valet mode

Remote start valet mode disables the remote starter completely.

When a remote start command is received, the engine will not

start, and the parking lights will ﬂash nine times quickly as

diagnostic feedback.

Use the following steps to manually enter and exit remote start

valet mode:

1

Insert your key in the ignition

barrel, and turn it to the ON

position.

OR

Press the PTS button once or

twice.*

OR

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

OR

2

Turn the key to the OFF position.

OR

Press the PTS button once more.

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

OR

3

Immediately press and hold the control

center button until the parking lights ﬂash 9

times.

Control Center

Button

LED

* The number of times the PTS button is pressed depends on the vehicle.

Check with your installer for the correct number. Make sure you do not

have your foot on the brake pedal during this step.

The parking lights will ﬂash nine times quickly when entering

remote start valet mode, and nine times slowly when exiting.

Alarm/security valet mode

When alarm/security valet mode is on, system convenience

features such as door locks, parking light ﬂash, and comfort

closure remain functional, while security features (if installed) such

as alarm triggers, conﬁrmation chirps, passive arming, auto re-

arming, and passive starter disable are deactivated.

The status LED will remain active for one hour after the ignition

turns off, as a reminder that valet mode is on, but always turns

off while driving.

Use the following steps to manually enter and exit alarm/security

valet mode:

1

Insert your key in the ignition

barrel, and turn it to the ON

position.

OR

Press the PTS button once or

twice.*

OR

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

OR

2

Turn the key to the OFF position.

OR

Press the PTS button once more.

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

OR

3

Immediately press and release the control

center button once.

Control Center

Button

LED

* The number of times the PTS button is pressed depends on the vehicle.

Check with your installer for the correct number. Make sure you do not

have your foot on the brake pedal during this step.

The siren/horn (if connected) will emit two long chirps when

entering alarm/security valet mode, and one long chirp when

exiting.

Startup diagnostics

If the vehicle fails to activate the remote start, the module will

notify you by ﬂashing the parking lights on the vehicle to indicate

why the engine did not start.

Parking Light Flashes Definition

5 Brake wire is active.

6 Hood pin wire is active.

7

Manual transmission mode is enabled and not

initialized.

9 Start Valet is active (remote start is disabled).

SmartStart compatible

This system is equipped with a free Bluetooth version of SmartStart

offering up to 200’ of range. If you would like to upgrade your

system to unlimited range and add GPS tracking, ask your dealer

or installer about adding a Directed SmartStart System.

Note

: A service plan is required.

What is SmartStart?

Now you can remote start, lock and unlock your car just by

pushing a button on your mobile device, using the SmartStart

App from Directed. The simple graphical interface gives you

control over the following features of your installed remote start or

security with remote start system:

• Lock/Arm

• Unlock/Disarm

• Remote Car Starter

• Trunk Release

• Panic

• AUX Channels

You can also control multiple vehicles – great for families – and

assign more than one user to control a vehicle. It is easy with

SmartStart! However, this is only the beginning! SmartStart

is loaded with additional features including GPS tracking,

SmartSchedule, vehicle status, roadside assistance, parked car

ﬁnder and more.

The application enables a “Cloud-Connected Car” like

never before, providing 2-way interaction with your vehicle.

Connectivity is managed through the Directed Cloud Services

(DCS) network linking car, app, end user, and the Internet.

For more information, visit www.mysmartstart.com.

Take advantage of all these great phone control features!

Visit the Apple App Store or Google Play Store and download

the free SmartStart Application today.

To download the app:

Scan the QR code or search for Directed

SmartStart in your mobile app portal.

Pairing your smartphone to the system

Once you have downloaded the SmartStart app, follow the in-

app instructions to create a free account and pair your phone to

your remote start or remote start and security system.

Engine Idle Protection System (EIPS)

Vehicles equipped with a push button start or push-to-start

keyless ignition and start system work by using various antennas

throughout the vehicle to detect the presence of the vehicle’s

electronic Smart Key. If the Smart Key has been removed from the

interior cabin of these vehicles while the engine is running, the

engine will still continue to run indeﬁnitely unless action is taken

by the user to shut the ignition system off, becoming a potential

hazard if the vehicle has been left unattended in a garage or

other conﬁned space.

The Engine Idle Protection System (EIPS) available on this product

has been designed as a convenience feature that can detect

the presence of the vehicle’s Smart Key within the cabin using

the vehicle’s OEM antennas and communications network. If the

key has been removed from the vehicle, EIPS will engage and

monitor the vehicle for a pre-deﬁned amount of time conﬁgured

at the time of installation (i.e. 1 to 5 minutes). Once engaged,

if the EIPS timer expires and the key has still not been detected

inside the vehicle, the EIPS feature will assume the vehicle has

been unintentionally left idling and will shut the engine off.

EIPS (Engine Idle Protection System) will:

• Notify the user about the idling engine by sounding the

horn with a series of short beeps.

• Shut down the engine after a pre-deﬁned period of time

(i.e. 1 to 5 minutes).

• If the engine fails to shut down due to some malfunction,

EIPS will go into alarm mode and will notify the user by all

means possible (e.g. horn or siren).

Note

:

• EIPS is conﬁgured using the conﬁguration wizard.

• The EIPS feature is disabled if the vehicle is in motion so

there is no risk that the vehicle will shut off while driving,

regardless of the fob being present in the vehicle or not.

Patent information

This product is covered by one or more of the following United

States patents:

Remote Start Patents:

5,349,931; 5,872,519; 5,914,667; 5,952,933;

5,945,936; 5,990,786; 6,028,372; 6,467,448;

6,561,151; 7,191,053; 7,483,783; 8,112,185

Vehicle Security Patents:

5,467,070; 5,532,670; 5,534,845; 5,563,576;

5,646,591; 5,650,774; 5,673,017; 5,712,638;

5,872,519; 5,914,667; 5,952,933; 5,945,936;

5,990,786; 6,028,505; 6,452,484; 7,519,400;

7,898,386

Other patents pending.

Government regulations

This device complies with Part 15 of FCC rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause

undesirable operation.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television, which can be determined by

turning the equipment OFF and ON, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician

for help.

This device complies with the Industry Canada Radio Standards

Speciﬁcation RSS 210. Its use is authorized only on a no-

interference, no-protection basis; in other words, this device must

not be used if it is determined that it causes harmful interference

to services authorized by IC. In addition, the user of this device

must accept any radio interference that may be received, even if

this interference could affect the operation of the device.

WARNING!

Changes or modiﬁcations not expressly approved

by the party responsible for compliance could void the user’s

authority to operate this device.

Warning! Safety ﬁrst

Please read the safety warnings below before proceeding.

Improper use of the product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only

be performed by an authorized Directed dealer. If you have any ques-

tions, ask your retailer or contact Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command

signal from the remote control transmitter. Therefore, never operate the

system in an enclosed area or partially enclosed area without ventilation

(such as a garage). When parking in an enclosed or partially enclosed

area or when having the vehicle serviced, the remote start system must be

disabled using the installed toggle switch. It is the user’s sole responsibility

to properly handle and keep out of reach from children all remote control

transmitters to assure that the system does not unintentionally remote

start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE

DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE

VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO

THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA

MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole

responsibility of the user.

Manual Transmission Vehicles

Remote starters on manual transmission vehicles operate differently than

those with automatic transmission because you must leave your car in

neutral. You must read this Owner’s Guide to familiarize yourself with

the proper procedures regarding manual transmission remote starters. If

you have any questions, ask your authorized Directed dealer or contact

Directed at 1-800-753-0600.

Before remote starting a manual transmission vehicle, be sure to:

• Leave the vehicle in neutral and be sure no one is standing in front

or behind the vehicle.

• Only remote start on a flat surface.

• Have the parking brake fully engaged.

WARNING!

It is the responsibility of the owner to ensure the parking/

emergency brake properly functions. Failure to do so can result in per-

sonal injury or property damage. We recommend the owner have the

parking / emergency brake system inspected and adjusted by a qualified

automotive shop biannually.

Use of this product in a manner contrary to its intended mode of opera-

tion may result in property damage, personal injury, or death. (1) Never

remotely start the vehicle with the vehicle in gear, and (2) Never remotely

start the vehicle with the keys in the ignition. The user must also have the

neutral safety feature of the vehicle periodically checked, wherein the

vehicle must not remotely start while the car is in gear. This testing should

be performed by an authorized Directed dealer in accordance with the

Safety Check outlined in the product installation guide. If the vehicle starts

in gear, cease remote start operation immediately and consult with the

authorized Directed dealer to fix the problem.

After the remote start module has been installed, contact your authorized

dealer to have him or her test the remote start module by performing the

Safety Check outlined in the product installation guide. If the vehicle starts

when performing the Neutral Safety Shutdown Circuit test, the remote

start unit has not been properly installed. The remote start module must be

removed or the installer must properly reinstall the remote start system so

that the vehicle does not start in gear. All installations must be performed

by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS

IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION.

OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS

MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU

MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE

ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR

DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED

WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR

REINSTALLATION COSTS.

This product is designed for fuel-injected vehicles only. Use of this product

in a standard transmission vehicle must be in strict accordance with this

guide. This product should not be installed in any convertible vehicles,

soft or hard top with a manual transmission. Installation in such vehicles

may pose certain risk.

Interference

All radio devices are subject to interference, which could affect proper

performance.

Upgrades

Any upgrades to this product must be performed by an authorized

Directed dealer. Do not attempt to perform any unauthorized modifica-

tions to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please

take care to keep this product dry and away from heat sources. Any

damage from water or heat will void the warranty.

Limited lifetime consumer warranty

Directed Electronics. (“Directed”) promises to the original purchaser to

repair or replace (at Directed’s election) with a comparable reconditioned

model any Directed unit (hereafter the “unit”), excluding without limitation

the siren, the remote transmitters, the associated sensors and accesso-

ries, which proves to be defective in workmanship or material under

reasonable use during the lifetime of the vehicle provided the following

conditions are met: the unit was purchased from an authorized Directed

dealer, the unit was professionally installed and serviced by an authorized

Directed dealer; the unit will be professionally reinstalled in the vehicle

in which it was originally installed by an authorized Directed dealer;

and the unit is returned to Directed, shipping prepaid with a legible

copy of the bill of sale or other dated proof of purchase bearing the

following information: consumer’s name, telephone number and address;

the authorized dealers name, telephone number and address; complete

product description, including accessories; the year, make and model of

the vehicle; vehicle license number and vehicle identification number. All

components other than the unit, including without limitation the siren, the

remote transmitters and the associated sensors and accessories, carry a

one-year warranty from the date of purchase of the same. ALL PRODUCTS

RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF

OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This

warranty is non-transferable and is automatically void if: the unit’s date

code or serial number is defaced, missing or altered; the unit has been

modified or used in a manner contrary to its intended purpose; the unit

has been damaged by accident, unreasonable use, neglect, improper

service, installation or other causes not arising out of defects in materials

or construction. The warranty does not cover damage to the unit caused

by installation or removal of the unit. Directed, in its sole discretion, will

determine what constitutes excessive damage and may refuse the return

of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES,

INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED

WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR

PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT

OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND

DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR

ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY

IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS

AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF

THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS.

DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE

DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING

A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR

THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY

EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING

WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR

VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS

FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT

OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT

OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY,

THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF

CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL

LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM

RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY

LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE

OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY

DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY

CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO

VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS,

COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE

LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES

OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL

MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN.

THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED

FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE

UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE,

NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR

OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR

CONSTRUCTION.

La page est en cours de chargement...

Directed DS4 OEM Le manuel du propriétaire

Ce manuel convient également à

Directed DS4 OEM Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents