Autostart AS-DSP210 Le manuel du propriétaire

Marque: Autostart

Modèle: AS-DSP210

Catégorie: Démarreurs à distance

Taper: Le manuel du propriétaire

Ce manuel convient également à

AS-DSP110

GUIDE DE

L'UTILISATEUR

OWNER’S GUIDE

The company behind Autostart

Systems is Directed Electronics.

Autostart was one of the first to

design and build remote control

vehicle starters. Over the years,

a continuing commitment

to quality and reliability has

allowed Autostart to gain a

respected reputation as a high-

end designer of remote start

and security systems. Today,

Autostart continues to set

standards in the industry.

Call (800) 876-0800 for more

information about our products

and ser vic es.

La compagnie à l'origine des

Systèmes Autostart

est

Directed Electronics.

Autostart a été l'un des premiers

à concevoir et à fabriquer des

démarreurs à distance pour

véhicules. Au fil des ans, son

engagement à la qualité et

la fiabilité continu a permis

à Autostart d'obtenir une

réputation enviable en tant

que concepteur de systèmes

de démarrage à distance et

de sécurité haut de gamme.

Aujourd'hui, Autostart continue

d'établir les normes de

l'industrie.

Appelez au (800)876-0800 pour

de l'information supplémentaire

au sujet de nos produits et

services.

Systèmes de démarrage à distance et de sécurité

Remote Start & Security Systems

Redéﬁnition du contrôle absolu

Redeﬁning the Ultimate Control

Directed s'engage à offrir des produits et

services de qualité de classe mondiale qui

raviront les clients.

Directed Electronics is committed to

delivering world class quality products

and services that excite and delight our

customers.

Vista, CA 92801

www.directed.com

Featuring DS4 Tech n olo g y

Technologie DS4 Intégrée

590-10728 ML 2017-07

MODÈLE/MODEL

AS-DSP210

AS-DSP110

Table of Contents

Congratulations ..........................................................................1

Important Information ..................................................................2

Government Regulations and Safety Information .....................2

Your Warranty .....................................................................2

Replacement Remote Controls ................................................2

Introduction .................................................................................3

1-button Remote Control .......................................................3

Antenna .............................................................................3

Using the System .......................................................................... 4

Start Engine .......................................................................4

Unlock Doors .....................................................................4

Stop Engine .......................................................................4

Car Finder .........................................................................4

Valet Mode .........................................................................5

Battery Information .......................................................................6

Low Battery Alert ................................................................6

Battery Replacement .............................................................6

Battery Disposal ..................................................................7

Patent Information ........................................................................7

Government Regulations ...............................................................8

Warning! Safety First .................................................................. 10

Limited Lifetime Warranty ............................................................13

500-10729-01

2017-07

Congratulations

Congratulations on the purchase of your state-of-the-art Autostart

Digital System. Reading this Owner’s Guide prior to using your

system will help maximize the use of your system and its many fea-

tures. For any additional questions please contact your authorized

Autostart dealer.

Note: Your system is conﬁgurable and may or may not include

features such as remote start or security. This guide also covers

optional features which may not be applicable to your system.

Please speak with your dealer to ﬁnd out which features are

applicable.

Important Information

Government Regulations and Safety Information

Read the Government Regulations and Warning!

Safety First sections of this manual prior to operating

this system.

WARNING! Failure to heed this information can result

in death, personal injury or property damage and may

also result in the illegal use of the system beyond its

intended purpose.

Your Warranty

Your system comes with a warranty. The warranty terms are de-

tailed at the end of this guide. Make sure that you receive the

proof of purchase from your dealer, indicating the product was

installed by an authorized Autostart dealer.

Replacement Remote Controls

Please see your authorized dealer. Remote control part numbers

are typically found on the back of the device.

Introduction

1-button Remote Control

System State Press/Release Button Press/Hold for 3 sec.

Engine OFF Start Engine Car Finder

Engine ON Unlock Doors Stop Engine

Antenna

LED

Programming

Button

The Antenna, typically located on the upper part of the front wind-

shield, sends and receives commands or messages to and from

the system. It consists of:

• The Status LED, as a visual indicator of the system’s status.

• Programming button, for accessing various feature, program-

ming, and reporting functions of the system.

Using the System

Start Engine

When the engine is OFF, press and release the remote control

button to start the engine. If the remote start fails to turn on, the

vehicle parking lights will ﬂash to indicate the cause. Refer to the

following table for the likely cause.

Alert Conditions:

Parking Light

Flashes*

Possible Cause Solution

5 Brake ON Release Foot Brake.

6 Hood Open Close Hood.

After performing Remote Start

command MTS not enabled.

Enabled MTS Mode.

9 Start Valet on Turn Start Valet off

Unlock Doors

When the engine is running with Remote Start, press and release

the re mote control button. The doors Unlock, the parking lights

ﬂash and the horn sounds (if connected) as conﬁrmation.

Stop Engine

When the engine is ON with Remote Start, press and hold the

remote control button until the transmit LED ﬂashes fast. The engine

stops run ning and the parking lights turn OFF.

Car Finder

When the engine is OFF, press and hold the remote control button

for three seconds. The horn sounds (if connected) once and the

parking lights ﬂash multiple times.

Valet Mode

Start Valet mode disables remote start features until turned off.

Use the following routine to manually turn on/off the Start Valet

Mode:

1. Turn the ignition ON and then OFF.

2. Press and hold the Valet button for ﬁve seconds.

The parking lights ﬂash nine times in rapid succession when

turned on, and nine times in slow succession when turned

off.

Emergency Override

The following procedure Disarms the system when a programmed

remote is not available. Number of presses__________

1. Turn the ignition ON.

2. Press the Valet button the correct number of times (the default

is 1 press). After a few seconds the siren output ceases and

the system is Disarmed.

Battery Information

The 2-way remote ASDS-2110*, is powered by two coin cell

batteries (CR-2016), and the 1-way remote ASDS-1110, is pow-

ered by a single coin cell battery (CR-2016). Operating range

diminishes as battery charge depletes.

Low Battery Alert

When unlocking the vehicle using a remote control with a low

battery charge, the system provides a notiﬁcation by emitting a

third horn honk output (if connected). If conﬁrmation chirps are

programmed off, the system still emits one horn honk when unlock-

ing. After performing a command with the remote control, sever-

al beeps play to indicate the battery/batteries need replacing.

Once the alerts begin, the remote control will remain operational

for several days but the battery/batteries should be replaced at

the earliest opportunity or failure to control the system may occur.

Battery Replacement

1. Unscrew the hardware on unit rear and remove from hous-

ing (if present).

2. Use a small ﬂat blade screwdriver and insert it into the slot

located along the bottom of the remote, near the key ring.

Carefully pry open the case.

3. Gently slide out the used battery/batteries to remove it from

the holding clip. Orient the new battery for the correct polar-

ity and insert into holding clip.

4. Realign the case parts and snap together by pressing ﬁrmly

and evenly on the front and back. Reinstall screw (if present).

Battery Disposal

Directed cares about the environment. If you need to

dispose of the battery, please do so in accordance with

your municipal requirements for battery disposal.

* Note: Your system may not include the 2-way remote

(ASDS-2110).

Patent Information

This product is covered by one or more of the following United

States patents:

Remote Start Patents:

5,349,931; 5,872,519; 5,914,667; 5,952,933;

5,945,936; 5,990,786; 6,028,372; 6,467,448;

6,561,151; 7,191,053; 7,483,783

Vehicle Security Patents:

5,467,070; 5,532,670; 5,534,845; 5,563,576;

5,646,591; 5,650,774; 5,673,017; 5,712,638;

5,872,519; 5,914,667; 5,952,933; 5,945,936;

5,990,786; 6,028,505; 6,452,484

Other patents pending.

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates and

can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to

radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television, which can be determined by turning

the equipment OFF and ON, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

Remote Controls

To satisfy FCC RF exposure compliance requirements, this device should

be used in hand-held, hand operated configurations only. The device and

its antenna must maintain a separation distance of 20 cm or more from

the person’s body, except for the hand and wrists, to satisfy RF exposure

compliance. This device is designed to be used in a person’s hands and

its operating configurations do not support normal transmissions while it is

carried in pockets or holsters next to a person’s body.

Antenna

To satisfy FCC RF exposure compliance requirements, the device and

its antenna must maintain a separation distance of 20 cm or more from

the person’s body, except for the hand and wrists, to satisfy RF exposure

compliance.

This device complies with the Industry Canada Radio Standards

Specification RSS 210. Its use is authorized only on a no-interference,

no-protection basis; in other words, this device must not be used if it is

determined that it causes harmful interference to services authorized by

IC. In addition, the user of this device must accept any radio interference

that may be received, even if this interference could affect the operation

of the device.

WARNING!

Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this device.

Warning! Safety First

Please read the safety warnings below before proceed-

ing. Improper use of the product may be dangerous

or illegal.

Installation

Due to the complexity of this system, installation of this product must only be

performed by an authorized Autostart dealer.

Remote Start Capable

When properly installed, this system can start the vehicle via a command

signal from the remote control transmitter. Therefore, never operate the

system in an enclosed area or partially enclosed area without ventilation

(such as a garage). When parking in an enclosed or partially enclosed

area or when having the vehicle serviced, the remote start system must be

disabled using the “Start Valet” procedure found under “Valet Modes” in

this guide. It is the user’s sole responsibility to properly handle and keep

out of reach from children all remote control remote controls to assure

that the system does not unintentionally remote start the vehicle. IT IS

RECOMMENDED THAT THE USER INSTALL A CARBON MONOXIDE

DETECTOR IN THE LIVING AREAS ADJACENT TO THE VEHICLE. ALL

DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED

OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST BE CLOSED

AT ALL TIMES. These precautions are the sole responsibility of the user.

Manual Transmission Vehicles

Remote starters on manual transmission vehicles operate differently than

those with automatic transmission because you must leave your car in

neutral. You must read this Owner’s Guide to familiarize yourself with the

proper procedures regarding manual transmission remote starters. If you

have any questions, ask your authorized Autostart dealer.

Before remote starting a manual transmission vehicle, be sure to:

• Leave the vehicle in neutral and be sure no one is standing in front

or behind the vehicle.

• Only remote start on a flat surface

• Have the parking brake fully engaged

WARNING!

It is the responsibility of the owner to ensure the parking/

emergency brake properly functions. Failure to do so can result in personal

injury or property damage. We recommend the owner have the parking /

emergency brake system inspected and adjusted by a qualified automotive

shop biannually.

Use of this product in a manner contrary to its intended mode of operation

may result in property damage, personal injury, or death. (1) Never

remotely start the vehicle with the vehicle in gear, and (2) Never remotely

start the vehicle with the keys in the ignition. The user must also have

the neutral safety feature of the vehicle periodically checked, wherein the

vehicle must not remotely start while the car is in gear. This testing should be

performed by an authorized Autostart dealer in accordance with the Safety

Check outlined in the product installation guide. If the vehicle starts in gear,

cease remote start operation immediately and consult with the authorized

Autostart dealer to fix the problem.

After the remote start module has been installed, contact your authorized

dealer to have him or her test the remote start module by performing the

Safety Check outlined in the product installation guide. If the vehicle starts

when performing the Neutral Safety Shutdown Circuit test, the remote

start unit has not been properly installed. The remote start module must be

removed or the installer must properly reinstall the remote start system so that

the vehicle does not start in gear. All installations must be performed by an

authorized Autostart dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS

IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION.

OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS

MAY CAUSE THE VEHICLE TO UNEXPECTEDLY LUNGE FORWARD

RESULTING IN PROPERTY DAMAGE OR SERIOUS PERSONAL INJURY

INCLUDING DEATH. YOU MUST IMMEDIATELY CEASE THE USE OF THE

UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED AUTOSTART

DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START

MODULE. AUTOSTART WILL NOT BE HELD RESPONSIBLE OR PAY FOR

INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected vehicles only. Use of this product in

a standard transmission vehicle must be in strict accordance with this guide.

This product should not be installed in any convertible vehicles, soft or

hard top with a manual transmission. Installation in such vehicles may pose

certain risk.

Interference

All radio devices are subject to interference which could affect proper

performance.

Upgrades

Any upgrades to this product must be performed by an authorized Autostart

dealer. Do not attempt to perform any unauthorized modifications to this

product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please take

care to keep this product dry and away from heat sources. Any damage

from water or heat will void the warranty.

Limited Lifetime Warranty

REMOTE STARTERS:

As the manufacturer, Directed warrants to the original consumer purchaser

only (non-transferable) that the remote starter module (control box) shall

be free from defects in materials and workmanship for as long as the

original consumer purchaser continuously owns the vehicle in which the

remote starter was originally installed. Directed promises to the original

purchaser to repair or replace (at Directed’s election) with a comparable

reconditioned model any Directed unit (hereafter the “unit”), excluding

without limitation the siren, the remote transmitters, the associated sensors

and accessories, which proves to be defective in workmanship or material

under reasonable use during the lifetime of the vehicle.

This warranty is non-transferable and is automatically void if: the unit’s date

code or serial number is defaced, missing or altered; the unit has been

modified or used in a manner contrary to its intended purpose; the unit

has been damaged by accident, unreasonable use, neglect, improper

service, installation or other causes not arising out of defects in materials

or construction. The warranty does not cover damage to the unit caused

by installation or removal of the unit. Directed, in its sole discretion, will

determine what constitutes excessive damage and may refuse the return of

any unit with excessive damage.*

* Effective on modules produced since August 2011.

ACCESSORIES:

Directed warrants to the original consumer purchaser only (non-transferable)

that it will replace any Directed accessory part for a one-year period from

date of purchase. Accessories will only be replaced if proven defective

in material or workmanship, and if, when the accessory is returned to

the point of purchase, the retailer is provided with a copy of the proof of

purchase. The accessory will be sent to the retailer for the consumer to

claim within a 4 (four)-week period.

THE WARRANTY IS VOID IF:

1. The product has been damaged, altered in any way or tampered

with, without the explicit written consent of a Directed technician. For

remote starter modules, this includes the opening or removal of the

plastic covering of the module, or the removal or alteration of the

barcode label on the plastic covering of the module.

2. The product is damaged due to accident, fire, flood, shipping and

handling, misuse, neglect, or other conditions beyond the control

of Directed.

3. The product has been installed or repaired by anyone other than a

certified technician.

4. The product has been improperly installed or used.

THE WARRANTY DOES NOT COVER:

1. Batteries.

2. Scratched or worn transmitter cases.

3. Modules indicating a production date earlier than August 1, 2011.

4. Installation and/or removal charges for all remote starter modules

and accessories.

5. Shipping and handling charges incurred for product exchange or

replacement.

6. Any material damages other than to the product itself.

7. Harnessing, LED lights, switches, inverters, relays, etc.

THIS LIMITED LIFETIME WARRANTY SHALL CONSTITUTE THE SOLE

LIABILITY OF DIRECTED FOR OUR PRODUCTS, AND IS IN LIEU OF

ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. THERE ARE NO

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO

ASSUME FOR DIRECTED ANY OTHER LIABILITY WITH RESPECT TO THE

SALE OR USE OF OUR PRODUCTS. DIRECTED’S LIABILITY, WHETHER

BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR ANY

OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL

UNIT WHOSE DEFECT FOR DAMAGE IS THE BASIS OF THE CLAIM.

UNDER NO CIRCUMSTANCE WILL DIRECTED, ITS DISTRIBUTORS OR

THEIR AGENTS BEAR ANY LIABILITY WHATSOEVER FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES.

The parties here to elect that any dispute regarding the present document

be submitted to the appropriate Court located in the Province of Quebec,

District of Montreal. The parties hereto agree that this document is

governed by and interpreted in accordance with the law of Quebec. If

the purchaser is located in a province of Canada other than Quebec,

all matters dealing with the warranty of quality will be governed by and

interpreted in accordance with the law of Ontario. If the purchaser is lo-

cated outside Canada, all matters dealing with the warranty of quality will

be governed by and interpreted in accordance with the United Nations

Convention on Contracts for the International Sale of Goods (the “Vienna

Convention”).

Autostart AS-DSP210 Le manuel du propriétaire

Marque: Autostart

Modèle: AS-DSP210

Catégorie: Démarreurs à distance

Taper: Le manuel du propriétaire

Ce manuel convient également à

AS-DSP110

Télécharger le PDF

rapport

dans d''autres langues

English: Autostart AS-DSP210 Owner's manual

Autostart AS-DSP210 Le manuel du propriétaire

Ce manuel convient également à

Autostart AS-DSP210 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents