Snap-On BK8000 Manuel utilisateur

User Manual Part # ZBK8000

Digital Wireless Video Scope

BK8000

Features Touch Screen Display & Dual View Imager

Digital Wireless Video Scope

2 Snap-on

U.S. Patents 7,384,308; 7,431,619 B2; 7,581,988 B2; 7,584,534; 7,758,495 B2; 7,979,689; other patents pending. Industrial

Rights Reserved.Perceptron, Inc., 47827 Halyard Dr., Plymouth, MI 48170. www.perceptron.com

Table of Contents

General Safety Information......................................................................................... 3

Work Area Safety ................................................................................................................................. 3

Personal Safety .................................................................................................................................... 3

BK8000 Battery and A/C Power Supply.............................................................................................. 3

Video Scope Use and Care ................................................................................................................. 4

Service .................................................................................................................................................. 4

Specific Safety Information......................................................................................... 5

FCC Statement ..................................................................................................................................... 5

Video Scope Safety............................................................................................................................... 5

Getting Started............................................................................................................. 6

Description............................................................................................................................................ 6

Specifications........................................................................................................................................ 6

Standard Equipment ............................................................................................................................ 8

BK8000/A/C Power Supply Inspection and Set-Up........................................................................... 9

Assembling the Charger....................................................................................................................... 9

Charging the BK8000........................................................................................................................... 9

Cleaning Instructions............................................................................................................................ 10

Assembly .............................................................................................................................................. 10

To Connect the Imager to the Imager Handle..................................................................................... 10

Tool and Work Area Set-Up .......................................................................................11

Operating Instructions ................................................................................................11

Using the Imager................................................................................................................................... 11

Using the Display Unit........................................................................................................................... 11

Using the Display Unit Rear Camera................................................................................................... 12

Taking still pictures and videos with the Imager Handle.................................................................... 12

Using the kickstand and magnet.......................................................................................................... 12

User Button Interface ........................................................................................................................... 13

Battery Status Display........................................................................................................................... 13

Pairing BK8000 Viewer and Imager Handle....................................................................................... 16

Using the BK8000 Expansion Connectors......................................................................................... 16

Image Transfer to Computer using USB............................................................................................. 17

Transportation & Storage ...........................................................................................17

Maintenance Instructions ...........................................................................................17

Service and Repair .....................................................................................................17

Troubleshooting.............................................................................................................18

Warranty .......................................................................................................................18

Snap-on Service Center Locations............................................................................19

Digital Wireless Video Scope

3

Snap-on

General Safety Information

Read and understand all in structions.

Failure to follow all instructions listed

below may result in electric shock,

fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keepyourworkareacleanandwelllit.Cluttered

benches and dark areas may cause accidents.

• Donotoperateelectricaldevicesorvideoscope

tool in explosive at mospheres, such as in the

presenceofammableliquids,gases,orheavy

dust. Electrical devices or visual inspection

tools create sparks which may ignite the dust or

fumes.

• Do not use the video scope around corrosive

chemicals.

• Keep bystanders, children, and visitors away

while operating visual inspection tool. Do not let

visitors contact the unit.

Personal Safety

• Stayalert, watch what you are doing and use

common sense. Do not use video scope while

tired or under the inuence of drugs, alcohol,

or med ications. A moment of inattention while

op erating tools may result in serious per sonal

injury.

• Donotoverreach.Keepproperfootingandbal-

ance at all times. Proper footing and balance

enables better control of the tool in unexpected

situations.

• Use safety equipment.

Always wear eye protection

(users and bystandrs). Dust

mask, non-skid safety

shoes, hard hat, or hearing

protection must be used for appropriate condi-

tions.

• Useproperaccessories.Donotplacethisprod-

uct on any unstable cart or sur face. The product

may fall causing serious injury to a person or

serious damage to the product.

•Prevent object and liquid entry.

Never spill liquid of any kind on the

video dis play unit. Liquid increases

the risk of elec trical shock and

damage to the product.

• Donotusethisdeviceforpersonalormedical

use/inspection in any way.

• Theunitisnotshock-resistant.Donotuseitas

a hammer or drop it.

BK8000 Battery/ Power Supply

To reduce the risk of serious injury, read these pre-

cautions carefully before using the battery charger

or battery.

A/C Power Supply

• Do not probe A/C power supply with conduc-

tive objects. Shorting of battery terminals may

cause sparks, burns or electrical shock.

• Do not use A/Cpower supply if damaged. A

damaged A/C power supply increases the risk

of electrical shock.

• Use an appropriate power source. Do not

attempt to use a step-up transformer or an

engine generator. Doing so may cause damage

to the A/C power supply of the BK8000 resulting

inelectricalshock,reorburns.

• Do not allow anything tocover theA/C power

supply while in use. Proper ventilation is

required for correct operation of the A/C power

supply. Allow a minimum of 4” (10 cm) of clear-

ance around the charger for proper ventilation.

• Unplug the A/C power supply when not in

use. Reduces the risk of injury to children and

untrained persons.

• UnplugtheA/Cpowersupplyfromoutletbefore

attempting any maintenance or cleaning.

Reduces the risk of electrical shock.

• Do not use A/Cpower supply in a damp, wet

or explosive environment. Do not expose to

rain, snow or dirt. Contaminants and moisture

increase the risk of electrical shock.

• DonotopentheA/CpowersupplyorBK8000

housings. Have repairs performed only at

authorized locations. (see Snap-on Service

Center Location page 19).

• Do not carry the A/C power supply by power

cord. Reduces the risk of electrical shock.

Digital Wireless Video Scope

4 Snap-on

Battery Safety

The batteries in the BK8000 are NOT user replace-

able. Call your Service Center if you believe the

BK8000 battery is in need of service.

• Properly dispose of the BK8000. Exposure to

high temperatures can cause the battery to

explode, so do not dispose of in a re. Some

countries have regulations concerning battery

disposal. Please follow all applicable regula-

tions.

• Charge battery in temperatures above 32

degrees F (0 degrees C) and below 113 degrees

F (45 degrees C). Store BK8000 in tempera-

tures above -13°F (-25°C) and below 95°F

(35°C). Storage for a long time at temperatures

above 95°F (35°C) will reduce the capacity of

the BK8000. It is recommended to store the

BK8000 at 77°F (25°C) to maximize battery life.

Proper care will prevent serious damage to the

battery. Improper care of the battery may result

battery leakage, electrical shock and burns.

• IftheBK8000isdamaged,donotplugtheA/C

power supply into it. Do not attempt to charge.

• NeverdisassembletheBK8000unit.Thereare

no user-serviceable parts inside. Disassembling

the BK8000 may cause electrical shock or per-

sonal injury.

• Avoid contact with uids leaking from the

BK8000 unit. Fluids may cause burns or skin

irritation. Thoroughly rinse with water in case of

accidental contact with uid. Consult doctor if

uidcomesintocontactwitheyes.

Video Scope Use and Care

• Use video scope only as directed. Do not

operate the inspection unit unless the owner’s

manual has been read and proper training has

been com pleted.

• Do not immerse the handheld display unit in

water. Store in a dry place. Such measures

reduce the risk of electric shock and damage.

The imager head and the cable are water resis-

tant when the unit is fully assembled, but the

video display unit/handle is not.

• Do not use the camera if condensation forms

inside the lens. Let the water evap orate before

using again.

• DonotusetoolifON/OFFswitchisnotproperly

working. Any tool that cannot be controlled with

the switch is danger ous and must be repaired.

• Storeidleequipmentoutofthereachofchildren

and other untrained persons. Equipment is dan-

gerous in the hands of untrained users.

• Maintain the video scope with care. Properly

maintained tools are less likely to cause injury.

• Ifunitisdropped,checkforbreakageofparts,

and any other conditions that may affect the

tool’s operation. If dam aged, have the tool ser-

viced before using. Many accidents are caused

by poorly main tained tools.

• Use only accessories that are recommended

by the manufacturer for your tool. Accessories

that may be suitable for one tool may become

hazardous when used on another tool.

• Dry your hands before turning the unit ON or

OFF.

• Protect against excessive heat. The product

should be situated away from heat sources

such as radiators, heat registers, stoves or other

products (including ampliers) that produce

heat. Do not use the unit near moving machin-

ery or areas where the temperature will exceed

113°F (45°C).

Service

• Do not attempt to take any pieces of this unit

apart unless directed to by this manual.

• Follow instructions for changing accessories.

Accidents are caused by poorly maintained

equipment.

• Providepropercleaning.Donotuseacetoneto

clean the unit. Instead, use isopropanol.

• GentlycleantheLCDwithadrycloth.

• Stopusingtheunitifitstartssmokingoremit-

ting noxious fumes.

• Refervideoscopetoqualiedservicepersonnel

under any of the following conditions:

– If liquid has been spilled or objects have fall-

en into product;

– If product does not operate normally by fol-

lowing the operating instructions;

– If the product has been dropped or dam aged

in any way;

– When the product exhibits a distinct change

in performance.

If you have any questions regarding the service or

repair of this machine, call or write to the appropriate

repair center location (see "Snap-on Service Center

Locations page 19).

Digital Wireless Video Scope

5

Snap-on

Technical questions can be directed to our toll free

number at 1-877-765-7665 Monday through Friday

6:30 am to 5:00 pm Central Time (U.S. customers

only).

Specific Safety Information

Read this operator's manual carefully before using.

Failure to understand and follow the contents of this

manual may result in electrical shock, fire and/or se-

vere personal injury.

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the fol lowing two conditions:

1. This device may not cause harmful inter ference.

2. This device must accept any interfer ence

received, including interference that may cause

undesired operation. NOTE! This equipment

has been tested and found to comply with

the limits for Class A digital devices, pursu-

ant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equip ment generates uses

and can radiate radio frequency energy and, if

not in stalled and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that in terference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be de termined by turning

the equipment off and on, the user is encour-

aged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equip-

ment and receiver.

– Consult the dealer for help.

Use of shielded cable is required to comply with

Class A limits in Subpart B of Part 15 of the FCC

rules.

Do not make any changes or modifications to the

equipment.

This device complies with Part 15 of the FCC Rules

and with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two

conditions: (1) This device may not cause harm-

ful interference, and (2) This device must accept

any interference received, including reference that

may cause undesired operation. Note: Changes

or modification not expressly approved by the party

responsible for compliance could void the user's au-

thority to operate the equipment.

This Class A digital device complies with Canadian

ICES-003.

Video Scope Safety

• Donotplacetoolintoanythingoranywherethat

may contain a live electrical charge.

• FOR WALLS: For inspecting inside walls, be

sure to shut off the circuit breaker to the whole

house before using the tool behind any of the

walls

• FORPIPES:Ifyoususpectametalpipecould

contain an electrical charge, have a qualied

electrician check the pipe before using the

tool. Ground cir cuits, in some cases, can be

returned to cast iron pipes and cause them to

be charged.

• FOR AUTOMOBILES/HEAVY EQUIPMENT/

MOTORSPORTS: Be sure the auto mobile,

heavy equipment or motorsport equipment is

not running during inspection. Metal and liquid

under the hood may be hot. Do not get oil or gas

on the imager head. Exposure to petroleum-

based sub stances will eventually degrade the

im ager head covering.

• GENERALUSE:Donotuseanywheretheunit

may come into exposure with haz ardous chemi-

cals, electrical charges or moving parts. Such

situations may result in serious injury or death.

SAVE THESE INSTRUCTIONS!

Digital Wireless Video Scope

6 Snap-on

Getting Started

Description

The BK8000 video scope displays live color video from an imaging sensor and lighting source connected to

a flexible dual view imager cable. The unit is capable of capturing still images and full-motion video, along

with audio. It can be used to look into tight spots and beam back real-time video to a color LCD. The magnet

accessory is included to attach to the imager head to provide application flexibility.

Specifications

Total Weight.................................1lb 10oz (800g)

DISPLAY UNIT:

Power Supply..................................Internal Li-Ion Battery, 3.7V, 2600 mAh, 9.6 watt-hours

Charge time .................................... 5 hours

Charger Input ..................................5V DC, 1. Amp

Length ............................................. 1.77" (45mm)

Width ...............................................7.2" (180mm)

Height ..............................................3.94" (100mm)

Built-in Camera ...............................3 megapixels, fixed focus

Screen Resolution ..........................480 x 272 RGB with LED backlight

4.3" (10.92 cm) Color Touchscreen LCD

Audio Input ......................................Built-in Microphone

Audio Output ...................................Built-in Speaker

Video Out ........................................NTSC/PAL

Run-time on battery .......................4 hours (approximately)

Wireless interface ..........................Wi-Fi - 802.11n

Wireless range ...............................33 ft (10m)

Operating Temperature ..................32°F to 104°F (0°C to 60°C)

(Batteries will not charge above 113°F (45°C))

Storage Temperature ..................... 14°F to 122°F (-20°C to 60°C )

59°F (15°C) is ideal for maximum battery life.

Relative Humidity.............................5% to 90% non-condensing

IMAGER HANDLE:

Power Supply..................................Internal Li-Ion Battery, 3.7V, 2600 mAh, 9.6 watt-hours

Charge time .................................... 5 hours

Charger Input ..................................5V DC, 1.Amp

Run-time on battery .......................4 hours (approximately)

Wireless interface ..........................Wi-Fi - 802.11n

Wireless range ...............................10m (33 ft)

Operating Temperature ..................32°F to 104°F (0°C to 60°C)

(Batteries will not charge above 113°F (45°C))

Storage Temperature ..................... 14°F to 122°F (-20°C to 60°C )

59°F (15°C) is ideal for maximum battery life.

Relative Humidity ...........................5% to 90% non-condensing

Length ............................................. 1.77" (45mm)

Width ...............................................3.07" (78mm)

Height ..............................................6" (152mm)

Digital Wireless Video Scope

7

Snap-on

IMAGER:

Length ............................................. 36 in (0.91m) Dual View

Wireless Reception Range ............ 33 feet (10m) (unobstructed line-of-sight distance)

Forward Camera/Side Camera

Field of View ........................... approximately 52° diagonal

Optimal Focal Range .............0.5” to 12” (12cm to 30.5cm)

Resolution .......................................640 x 480

Operating Temperature ..................32°F to 104°F (0°C to 60°C)

Storage Temperature ..................... 14°F to 122°F (-20°C to 60°C)

Relative Humidity ...........................5% to 90% non-condensing

Water Resistance ........................... Imager to 10' (3m) water depth (when assembled)

A/C Power Supply:

Input Voltage ...................................100-240VAC, 50-60Hz 0.6Amp

Maximum inrush current ............... 30A @ 115VAC, 60A @ 230VAC

Output voltage ............................... 5V DC 2.6Amp Max

No Load Standby power ................<0.3W

Operating Temperature ..................32°F to 104°F (0°C to 40°C)

Storage Temperature ..................... 14°F to 167°F (-10°C to 75°C)

Relative Humidity ..........................20% to 80% non-condensing

NOTE! The charger and internal batteries are not compatible with any other Snap-on Li-Ion Batteries

and chargers.

Digital Wireless Video Scope

8 Snap-on

FIGURE 1: System Components

Key Stock Number Description

1,2 BK8000 Display Unit and Imager handle

3 BK8000-1 36" long, 8.5mm diameter 9-pin dual view imager

4 BK8000-5 Magnet retrieval tool

* BK6000-12 USB Cable

* BK8000-4 Blow molded case

* BK8000-6 External power supply

* ZBK8000 Manual

(*) product not shown

1

2

3

4

Standard Equipment

The Digital Wireless Video Scope comes with the following items (Figure 1):

Digital Wireless Video Scope

9

Snap-on

BK8000/A/C Power Supply Inspection and Set-

Up

Always wear eye protection to protect your eyes

against dirt and other foreign objects. Follow op-

erating instructions to reduce the risk of injury from

electrical shock.

Daily, before use, inspect the BK8000 and A/C Power

Supply and correct any problems. Set up charger

according to these procedures to reduce the risk of

injury from electrical shock, fire, and other causes and

prevent tool and system damage.

Before using the BK8000 for the first time, allow it

charge for at least 5 hours to ensure that the batteries

are fully charged.

Assembling the Charger

The charger is supplied with a selection of adaptors

for use in multiple countries. Before first use, select

the appropriate adaptor for your country and attach it

to the charger (Figure 2).

Figure 2: Assembling the Charger

Charging the BK8000

1. Nest the Display unit and Imager Handle together

and insert the power supply cable as shown (Figure

3):

Figure 3: Charging the BK8000

2. Ensure that the correct adapter is fitted into the

charger and insert the charger into a suitable power

output. The LEDs on the Viewer and Imager Handle

will indicate the charging status as follows:

CHARGE STATUS LED STATUS

Not Charging LED is OFF

Pre-Charge LED is Amber

Charging LED is Red

Fully Charged LED is Green

Note: The BK8000 will only charge the batteries if

the temperature is between 0°C and 45°C (32°F

and 113°F). Outside of this temperature range the

BK8000 may continue to operate but the batteries will

not charge and the Charge Status LED will be off.

1. Make sure the charger is unplugged. Inspect

the power cord, charger and battery for dam-

ageormodications,orbroken,worn,missing,

misaligned or binding parts. If any problems are

found, do not use charger until the parts have

been repaired or replaced.

2. Clean any oil, grease or dirt from the equipment

as described in the Maintenance section, espe-

cially handles and controls. This helps prevent

the equipment from slipping from your grip and

allows proper ventilation.

3. Check to see that all warning labels and decals

on the BK8000 and A/C Power Supply are intact

and readable.

4. Select the appropriate location for the A/C

Power Supply before use. Check work area for:

– Adequate lighting.

– Flammable liquids, vapors or dust that may

ignite. If present, do not work in area until

sources have been identified and corrected.

The charger is not explosion proof and can

cause sparks.

– Do not use the device in wet or damp areas.

5. With dry hands, plug charger into the appropri-

ate power source.

6. When the battery is fully charged, the red LED

is replaced by a green LED.

– Once the battery is charged, it may remain

plugged into the charger until it is ready to

be used. There is no risk of over-charging

the battery. When the battery has been fully

charged, the charger automatically switches

Digital Wireless Video Scope

10 Snap-on

to retention charging. If the unit is on while

charging, the LED indicators on the battery

will not display a fully charged battery until

the unit is turned off.

7. With dry hands, unplug charger from outlet

once charging completes.

Cleaning Instructions

Unplug charger before cleaning. Do not use any

water or chemicals to clean charger or batteries to

reduce the risk of electrical shock.

1. If present, remove charger from the unit.

2. Remove any dirt or grease from the exterior of

the charger and battery pack with a cloth or soft

non-metallic brush.

Assembly

NOTICE: Be sure to read Battery Precautions sec-

tion page 4.

The BK8000 has two main components; the Viewer

and the Imager Handle (Figure 4).

Figure 4: Display Unit and Imager Handle

The Viewer and Imager Handle nest together for

storage, transportation and charging using a unique

locking feature. To disconnect the Imager Handle

from the Viewer, pull the bottom of the Imager Han-

dle away from the Viewer and lift upwards.

To nest, engage the locking feature at the top of the

Imager Handle with the Viewer case and rotate the

bottom of the Imager Handle towards the Viewer, the

magnet will hold the two securely together.

The Imager Handle and imager are supplied as-

sembled. Should the user wish to use a different

imager, the imager can be removed by unscrewing

the imager connector in the direction indicated by

the engraved arrow and the word remove.

To Connect the Imager to the Imager Handle

To assemble a new imager to the Imager Handle,

first align the tab on the Imager Handle with the slot

on the imager and mate the connectors (Figure 5).

Finger-tighten the connector nut to secure the piec-

es. Do not use tools to tighten the connector nut.

Note: BK8000 is not compatible with the BK5500

and BK6000 Push-Fit style imagers.

Figure 5: Connecting the Imager to the Imager

Handle

To Install the Magnet Retrieval Accessory: The

unit is supplied with a magnet retrieval accessory for

retrieving small ferrous objects from difficult to reach

places (Figure 6). The accessory is attached to the

imager head by aligning the opening on the acces-

sory with the flats on the imager head and pushing

in-place. Rotating the accessory 90° locks it in

place. To remove, rotate the accessory until the clip

opening aligns with the flats on the imager and pull

to remove.

Figure 6: Installing Magnet

Digital Wireless Video Scope

11

Snap-on

Tool and Work Area Set-Up

To prevent serious injury, proper set-up of the tool

and work area is required. The following procedures

should be followed:

1 Review General Safety Information sec tion of

this manual (see page 4).

2. Check work area for:adequate lighting, am-

mable liquids, vapors or dust that may ignite.

3. Follow tool set-up according to specic tool

operator’s manual.

Operating Instructions

Do not use excessive force to in sert or

bend the cable.

Do not use the cable or imager head to

modify surroundings, clear pathways or clogged ar-

eas, or as anything other than an in spection device.

The Display Unit is not water resistant. The imager

head and its cover ing are water resistant, but are not

acid-proof or fireproof. Petroleum-based products

will ruin the imager cable’s protective plastic cover-

ing over time. Avoid submersing the imager head

into corrosive, oily places.

Using the Imager

To display images from the Imager Handle on the

viewing unit, both units must be turned on. If using

the Viewer to view or edit images, there is no need

to switch on the Imager Handle. (Figures 7 and 8).

Figure 7: Using the Viewer Handle

First, ensure that the imager camera is correctly

attached to the Imager Handle (see Assembly in-

structions). The Imager Handle is switched on and

off by pressing and holding the ON / Capture button

for greater than 2 seconds – the Orange ON LED will

illuminate when the unit is powered on.

For viewing in reduced light conditions, the imager

camera includes a high-power LED for illuminating

objects. Adjust the LED light output for optimum

viewing conditions by using the LED + and LED –

buttons on the Imager Handle. Note that the buttons

will auto-repeat if held for greater than half a second.

Figure 8: Using the Display Unit

To conserve batteries, the Imager Handle will auto-

matically switch off 20 minutes after the last button

press. The current status of the Imager Handle bat-

tery is displayed on the Display Unit display.

Using the Display Unit

The Display Unit performs a number of functions:

•Display and capture live images from the Imager

Handle as stills or video

•Display and capture still images from the built-in

rear camera.

•SelectthevideosourceonthesuppliedDualView

Imager camera (front or side)

1. Power / Capture Button

2. Charge Status Indicator

3. Increase Imager LED brightness

4. Power ON Indicator

5. Decrease Imager LED brightness

1. Speaker

2. Touch Screen Display

3. Charge Status Indicator

4. Power Button

5. Microphone

Digital Wireless Video Scope

12 Snap-on

•Play-backcapturedimagesandvideo

•Audioandtextualannotationofstillpictures(video

file naming)

•Deletestoredfiles

Using the Display Unit Rear Camera

The rear camera is used to capture high-resolution

(3 megapixels) still images. Pictures are best taken

when the object to be photographed is evenly lit from

the front. The system will not save a picture if there

is insufficient memory available.

Select the Rear Camera as the image source, (the

Display Unit will default to Still Image capture mode),

point the camera at the object to be photographed

and press the icon.

Taking still pictures and videos with the Imager

Handle

The BK8000 can store video and still images using

the Imager Handle as the source. Pictures and video

are captured and stored at a resolution of 640 x 480.

The original image is stored, the digital zoom func-

tion will have no affect on the stored image.

If using an imager with a dual camera,

select the Forward facing or Side fac-

ing camera then select the Video

capture or Still photograph mode. To

take a picture or start / stop a video

(depending on mode), briefly press

the ON / Capture button on the Im-

ager Handle. When taking a still

picture, the hourglass icon will dis-

play briefly to indicate that the picture

has been stored successfully. When

taking a video, the Display Unit will

show the

icon to indicate that

the video has started; when stop-

ping the video the Display Unit will

display the hourglass icon briefly in-

dicating video captured is displayed.

(Figure 9)

Figure 9: Imager and Camera Icons

Using the kickstand and magnet

The kickstand has 3 positions to allow the user to

place the BK8000 at the optimum angle for viewing

and operating the BK8000 Viewer. In addition to the

kickstand, the BK8000 Display Unit has 4 magnets

located on the rear of the unit that will hold the unit

securely in place on a flat, ferrous surface such as

the side of a tool cabinet or car body panel. (Figure

10 and 11)

Figure 10: Using the Magnet and Kickstand

Figure 11: Using the Kickstand

1. Magnets

2. Kickstand in Closed Position

1. Kickstand at 90°

2. Kickstand at 45°

3. Kickstand in Closed Position

Digital Wireless Video Scope

13

Snap-on

Typical Applications

The Snap-on Video Scope is designed as a re mote

inspection device. Typical applications may include

automotive inspection, boat/aircraft inspection, etc.

It can be used for valve, cylinder bore, HVAC and a

rear-differential inspection, just to name a few.

User Button Interface

The Touch Screen and display (Figure 12) is divid-

ed into 3 main areas:

• StatusDisplay

• ImageDisplay

• FunctionSelect

The touch screen is designed to be operated by

light finger pressure – do not use any other object

to operate the touchscreen.

Figure 12: Touch Screen Display

Battery Status Display

The status display provides an overview of the sys-

tem status to the user. The Battery Icon indicates

the remaining charge in battery (Figure 13). The

icon changes to indicate the user that the battery

is charging.

Battery Charging

Battery Full

Battery Empty

Figure 13: Battery Status Icons

Record Time

The record time indicator indicates

that the BK8000 is recording video or

audio and the length of the recording.

Memory Status

The available memory space in the

BK8000 internal memory or an inserted

Micro SD memory card is shown as a

percentage of the original size. The ac-

tual number of still pictures or video recording time

remaining will vary according to the size of memory

device and mix of files stored. The displayed icon

changes to indicate that an SD card is inserted.

Image Display

The image is normally displayed in the center sec-

tion of the screen. Displayed images can be digitally

zoomed up to 2 times the original size or expanded

to fill the entire screen.

Pressing this icon digitally zooms the

image in by 25% each press to a maxi-

mum of 200%.

Pressing this icon digitally zooms the

image out by 25% each press to a mini-

mum of 100%

Pressing this icon expands the image

to fill the entire screen. Tapping the

screen anywhere returns to the normal

viewing mode.

1. Function Select

2. Image Display

3. Status Display

4. Imager Battery Status

5. Viewer Battery Status

6. Record Time

7. Memory Status

8. Pop-Out Indicator

Digital Wireless Video Scope

14 Snap-on

Function Select

Pressing one of the function select buttons will

either step into another screen presenting addi-

tional functions or will 'pop' out an additional set of

buttons allowing the user to quickly select a par-

ticular function. Those buttons that 'pop out' can

be identified by the additional light grey background

surrounding the button as shown:

The back icon is used in various

screens to move to the previous

screen. The user can always return

to the home screen by pressing this

button until it is no longer available.

The confirm screen is used in various screens to

confirm that the user is sure that the desired func-

tion has been selected.

Confirms the action

Cancels the action

Figure 14: On-Screen Keyboard

The On-Screen keyboard (Figure 14)is used when

text entry is required such as renaming a file or an-

notating a picture.

This button switches to an ad-

ditional keyboard layout which

includes numbers and special

characters.

This button exits the keyboard

and the user is prompted to

confirm or cancel the action.

Mode Selection

The BK8000 Display Unit operates in two distinct

modes: Live Mode and Playback Mode. Live mode

is used for viewing live images and capturing still pic-

tures and video. Playback mode is used for viewing

and editing recorded images and videos.

When in Live mode, pressing the

Playback Mode icon selects Playback

mode. The Function select buttons will

change according to the selected mode.

Playback Mode

The user is presented with a thumbnail view showing

the files that are available, when entering Playback

mode.

If there are too many files to display on one screen,

the arrow icons scroll backwards and

forwards through the list of files. Se-

lect the file to be viewed / edited by

pressing the appropriate thumbnail

picture. The screen will change to

show the still image or first frame of

the selected video. The desired op-

eration is selected using the following

Function buttons.

Delete

If a still image with an audio attach-

ment has been selected, the user is

prompted to delete either the audio

attachment (if available) or both the au-

dio and picture file; then confirm. If a

video file, or still picture with no audio

has been selected, then only the com-

plete file may be deleted.

Delete Entire File

Delete just the audio note, the picture

is not deleted.

Digital Wireless Video Scope

15

Snap-on

Edit

For still pictures, the edit menu allows a

user to Rename or Annotate (audio or

textual) the picture; for video, only the

rename function is available.

Text Annotation (Still pictures only).

Allows the user to add a textual an-

notation to the selected picture. The

text is added to the top of the picture

as displayed on the screen. Once

confirmed, this action cannot be

undone and the text cannot be re-

moved.

Rename File. This function allows the

user to append additional characters

to the name of the video or still file.

Note that the following characters are

available to the user for this function:

A-Z, a-z, 0-9, and underscore.

Audio Annotation (Still pictures only).

Records an audio annotation to the se-

lected still picture using the built-in

microphone. Recording starts immedi-

ately upon selecting. Press

to stop

recording. This action is not avail-

able if a still picture already has an

audio annotation; to record a new an-

notation, first delete the old one. For

best results talk towards the front of the

BK8000 Display Unit in a normal

speaking voice approximately 0.6m

(2ft) away from the unit. Maximum re-

cording length is one hour.

Play

This function is available for both video

files and still images with attached au-

dio annotations. Pressing this button

will start to play the video or audio file.

During playback, a progress bar indi-

cates the current position within the file.

Pause Playback mode

Continue Playback

Stops playback and goes back to the

thumbnail view.

Live Mode

In live mode an image is displayed from the selected

video source. This image can be captured as a still

photograph or video file (Imager Handle only) de-

pending on mode.

Image Source Selection

If there is no paired Imager Handle detected, the fol-

lowing screen will be displayed (Figure 15).

Figure 15: Image Source Selection Display

Note: the display until will continue to search for the

paired imager until it is detected. The following op-

tions are available:

Selects the forward looking camera on

the imager

Selects the side view camera on the im-

ager. Valid only for dual view imagers

Selects the rear BK8000 Display Unit.

Note that this camera supports still pic-

tures only.

MENU

Tools Menu

The BK8000 settings tools are found by

pressing the tools button.

Digital Wireless Video Scope

16 Snap-on

Set Time and Date

The BK8000 uses the time and date to

record what time that a still picture or

video was captured. After pressing this

function the BK8000 presents the user

with the Time and Date and an Up and

a Down arrow. (Figure 16)

Figure 16: Time and Date Icon

Format Memory

BK8000 internal memory may require

formatting from time to time. Selecting

this function and confirming will result

in all data being removed from internal

memory.

Firmware Version

This function displays the current firm-

ware versions of the BK8000 Display

Unit, Imager Handle and communica-

tion module. NOTE: Firmware updates

may be provided pre-loaded onto a mi-

cro SD card or supplied electronically

by download or email.

Auto Shut Down

This function allows the user to config-

ure auto shut down ranging from

disable to 30 minutes. (Figure 17)

Figure 17: Auto Shut Down Display

Video Out NTSC/PAL Selection

The function allows the user to select the

desired video output format. Press the

back arrow to exit. (Figure 18)

Figure 18: Video Output Format Display

Pairing BK8000 Viewer and Imager Handle

The BK8000 can only work with one

Imager Handle at a time. The BK8000

Display Unit and Imager Handle are

shipped to the user as a pair. To use

the Display Unit with a different Im-

ager Handle it must be paired.

Ensure that the Imager Handle that is to be paired

is switched on and that the LEDs are visible. The

Display Unit will display a list of all available Imager

Handles. Select the desired imager handle from the

list. The LEDs on the Imager Handle will blink to con-

firm pairing.

Using the BK8000 Expansion Connectors

The BK8000 expansion connectors are located be-

hind a flexible protective cover. To use any of the

expansion connectors, first open the cover and fol-

low the instructions below. After use, please replace

the protective cover.

Micro SD socket

Figure 19: SD Socket

1. Protective Cover

2. USB-mini

3. Video Out

4. Micro SD

Digital Wireless Video Scope

17

Snap-on

The BK8000 will accept a Micro SD card (not sup-

plied) for storage of pictures or video. To use, ensure

that the BK8000 is switched off and carefully insert

the card fully into the BK8000 as shown (Figure 20) :

Figure 20: Installing an SD Card

Video Out

The BK8000 can direct the viewer display to an

external NTSC/PAL video display. To use this

feature, a standard 3.5mm jack plug to RCA plug

cable is required. Fully insert the 3.5mm jack plug

into the BK8000 video-out connector and connect

the phone plug to the desired video display device.

Inserting the 3.5mm jack plug disables the BK8000

LCD display and touchscreen.

Image Transfer to Computer using USB

The BK8000 can be connected to a PC to transfer

image and video files using the supplied USB cable;

insert the small connector into the BK8000 and the

larger end into a computer. Depending on the oper-

ating system , the computer may inform the user that

a device is attached. The view unit LCD screen will

shut off while attached to the computer.

The BK8000 will appear as an external drive to the

user allowing pictures and videos to be transferred

to and from the BK8000. Note that if a Micro SD

card is inserted, only those files on the Micro SD

card will be available.

For Still images with audio captions, two files must

be transferred to the same folder. These files will

have a common filename with the following two ex-

tensions: .avi .jpg

Note that the BK8000 will not charge through the

USB connector.

Transportation & Storage

1. Avoid exposing the unit to continuous vi bration

or extreme hot and cold temper atures.

2. Always store the visual inspection device

in doors in the case it came with.

3. Always remove the batteries if the unit will not

be used for an extended period of time.

Maintenance Instructions

Make sure the batteries have been re-

moved from the unit before performing maintenance.

The Snap-on visual inspection device has been

designed to require little maintenance. However, in

order to maintain its performance, you must al ways

follow these guidelines:

1. Always handle the device with care. It is not

shock-resistant and should not be banged or

dropped. Treat it as you would any other sensi-

tive optical device.

2. Always clean the imager head after use with

soap or mild detergent.

3. Use only alcohol swabs to clean the con-

nections.

4. Avoid rubbing too hard on the LCD. After use,

wipe the display clean gently with a dry cloth.

5. Do not disassemble this device beyond what

is shown in the manual. Doing so will void your

warranty.

Service and Repair

Tool should be returned to the appropri-

ate repair center locations (see "Snap-on Service

Center Locations" on page 19). All repairs made

by Snap-on service facil ities are warranted against

defects in material and workmanship.

If you have any questions regarding the service or

repair of this machine, please call or write to one of

the eight service centers (see "Snap-on Service

Center Locations" on page 19) that is most con-

venient to your geographic location. Web site: buy1.

snapon.com/snaponstore/customer.asp

User serviceable repair parts

BK8000-1 36" long, 8.5mm diameter,

9-pin dual view imager

BK8000-4 Blow Molded Case

BK8000-5 Magnet Retrieval tool

BK8000-6 External Power Supply with

international adapters

BK5500-8 Composite Video Out Cable

BK6000-12 USB Cable

Digital Wireless Video Scope

18 Snap-on

SYMPTOM POSSIBLE REASON SOLUTION

Display Unit does not

display image from

imager handle

The imager is not inserted into the

imager handle

Connect imager securely to imager

handle

Imager handle not switched on Switch imager handle on & pair

with Display Unit

Imager handle is not paired with Display

Unit

Use Settings Menu to pair

imager handle with Display Unit

LCD screen is black,

but Display Unit is

ON

USB cable is inserted Remove cable

Video out cable is inserted Remove cable

Unit will not switch on Battery is very low Charge unit until Green charge

LED illuminates.

Battery does not hold

a charge

Faulty battery Return unit to appropriate service

center location.

Units will not charge

Power supply is not plugged in. Connect power supply to AC

supply and to BK8000

Battery is too hot Allow unit to cool

LED on imager is ON

but no image

Broken video signal wire Test with second imager if

available. Return to appropriate

service center location

Image on display is

frozen

Processor locked up Cycle power

Image on display is

breaking up or jerky

Imager handle out of range of Display

Unit

Move imager handle and Display

Unit within recommended range of

30 feet (10m)

Interference on radio Change channels on other radio

devices near by

Charging LEDs flash

red/green

Faulty battery Return unit to appropriate service

center location.

Charging LED glows

amber

Battery is low Charge until Green LED illuminates

Troubleshooting

Warranty

Limited Two (2) Year Warranty Snap-on Tools Company (the “Seller”) warrants only to the original purchaser that under normal use, care and

service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for two years from the

date of original invoice. SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER’S

OPTION,REPLACEMENTOFEQUIPMENT OR PARTSWHICHTO SELLER’SSATISFACTIONARE DETERMINED TO BE DEFECTIVE AND

WHICHARENECESSARYINSELLER’SJUDGMENT,TORETURNTHISEQUIPMENTTOGOODOPERATINGCONDITION.NOOTHERWAR-

RANTIES,EXPRESSORIMPLIEDORSTATUTORY,INCLUDINGWITHOUTLIMITATIONANYIMPLIEDWARRANTYORMERCHANTABILITY

ORFITNESSFORAPARTICULARPURPOSE,SHALLAPPLYANDALLSUCHWARRANTIESAREHEREBYEXPRESSLYDISCLAIMED.This

warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning,in operability

or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering;(B) alteration, modification or

adjustment of the Equipment by other than Seller’s authorized representatives; (C) installation, repair or maintenance (other than specified operator

maintenance) of the Equipment or related equipment, attachments, peripherals or optional features by other than Seller’s authorized representatives;

(D) improper or negligent use,application, operation, care, cleaning, storage or handling; (E) fire, water, wind, lightening or other natural causes; (F)

adverse environmental conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio

frequency interference, electric power failure, power line voltages beyond those specified for the Equipment, unusual physical, electrical or electro-

magnetic stress and/or other condition outside of Seller’s environmental specifications;(G) use of Equipment in combination or connection with other

equipment, attachments, supplies or consumable not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or

local regulation,requirement or specification governing emission analyzers and related supplies or consumables. Repairs or replacements qualifying

under this Warranty will be performed on regular business days during Seller’s normal working hours within a reasonable time following purchaser’s

request. All requests for Warranty service must be made during the stated warranty period. This Warranty is nontransferable.

Digital Wireless Video Scope

19

Snap-on

Snap-on Service Center Locations

If you have any questions regarding the service or repair of this machine, please call or

write the nearest location:

Eastern Repair Center (USA)

6320 Flank Drive

Harrisburg, PA 17112 USA

Toll Free # - (USA only): (800)-848-5067

Telephone: (717) 652-7914

Fax: (717) 652-7123

Snap-on Tools (Australia) Pty Ltd

National Distribution Centre

Unit 6/110 Station Road

PO Box 663

Sven Hills, NSW 1730 Australia

Telephone: (61) 2-9837-9100

Fax: (61) 2-9624-2578

email: sota.webmast[email protected]

Northern Repair Center (USA)

3011 E. RT 176, Dock 8

Crystal Lake, IL 60014

Toll Free # - (USA only): (877) 777-4412

Telephone: (815) 479-6850

Fax: (815)479-6857

Snap-on Tools Singapore PTE, Ltd.

25 Tagore Lane #01-01

Singapore 787602

Telephone: +(65) 6451-5570

Fax: +(65) 6451-5574

email: [email protected]

Internet: http://snapon.com.sg

Western Repair Center (USA)

3602 Challenger Way

Carson City, NV 89706 USA

Toll Free # - (USA only): (888) 762-7972

Telephone: (775) 883-8585

Fax: (775) 883-8590

Snap-on Tools Japan, K.K.

Snap-on, Bahco, and Cartec

Also serving Taiwan and Micronesia

(Distribution Center and Technical Repair Center)

2-1-6 Shinkiba, Koto-ku,

Tokyo,136-0082JAPAN

Telephone: +81 3 5534 1280

Fax: +81 5534 1284

email:SOJ[email protected]

OEM, National Accounts, GSA

Distribution: +81 3 5534 1300

Industrial: +81 3 5534 1281

BAHCD: +81 3 5534 1301

Technical Repair Center: +81 3 5534 1289

Snap-on UK Repair Centre

Snap-on Tools, Ltd.

Telford Way, Kettering

Northants, NN16 8UN ENGLAND

Telephone: 01536 413855

Fax: 01536 410740

Snap-on Tools of Canada Repair Center

7403 48th St. S.E.

Calgary, Alberta T2C 4H6 CANADA

Toll Free #: (866) 824-0525

Telephone: (403) 720-4525

Fax: (403) 720-4524

email: [email protected]

Digital Wireless Video Scope

20 Snap-on

La page charge ...

Snap-On BK8000 Manuel utilisateur

Snap-On BK8000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents