Dynex CRT Television DX-R27TV Manuel utilisateur

Marque: Dynex

Modèle: CRT Television DX-R27TV

Catégorie: Téléviseurs LCD

Taper: Manuel utilisateur

Ce manuel convient également à

DX-R27TV

USER GUIDE • GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO

27” MTS Stereo Color Television with Digital Tuner

Téléviseur couleur MTS de 27 po avec syntoniseur

numérique

Televisor a color de 27" con MTS estéreo y sintonizador

digital

DX-R27TV

Contents

Dynex DX-R27TV

27” MTS Stereo Color

Television with Digital Tuner

Contents

Important safety instructions........................................................... 2

Features ........................................................................................... 4

Setting up the television.................................................................. 5

Using the TV................................................................................... 10

Specifications................................................................................. 14

Troubleshooting............................................................................. 15

Legal notices .................................................................................. 15

90-Day Limited Warranty............................................................... 17

Français ..................................................... 18

Español ...................................................... 36

Important safety instructions

Warning:

To reduce the risk of fire or electric shock, do not expose this TV to rain or

moisture.

Important safeguards

• Read all of these instructions.

• Save these instructions for later use.

• Unplug this television from the power outlet before cleaning. Use

a dry cloth for cleaning. Do not use liquid cleaners or aerosol

cleaners.

• To avoid hazards, use only attachments recommended by the

television manufacturer.

• Do not use this television near water, such as near a bathtub, sink,

or swimming pool.

• Do not place this television on an

unstable cart, stand, or table. The

television may fall, causing serious

injury to a child or adult, and

serious damage to the television.

• Slots and openings in the sides,

back, and bottom are provided for

ventilation, to ensure reliable

operation of the television, and to

protect it from overheating.

These openings must not be blocked or covered. The openings

should never be blocked by placing the television on a bed, sofa,

rug, or other soft surface. This television should never be placed

near or over a radiator or heat register.

This television should not be placed in a built-in installation, such

as a bookcase, unless proper ventilation is provided.

• This television should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

power supplied to your home, consult your television dealer or

local power company.

• This television is equipped with a polarized alternating-current

line plug (a plug having one blade wider than the other). This plug

fits into the power outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your electrician

to replace your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

• Do not allow anything to rest on the power cord, and do not locate

this television where the cord may be stepped on.

• Follow all warnings and instructions marked on the television.

Caution

Changes or modifications not expressly

approved by the party responsible for

compliance with the FCC Rules could void the

user's authority to operate this equipment.

Caution

To prevent electric shock, do not use this

polarized plug with an extension cord,

receptacle, or other outlet unless the blades can

be fully inserted to prevent blade exposure.

CAUTION:

TO REDUCE THE RISK OF

ELECTRIC

SHOCK, DO NOT REMOVE

COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

Portable Cart Warning

(symbol provided by RETAC)

Important safety instructions

• If an outside antenna or cable system is connected to the

television, be sure the antenna or cable system is grounded so as

to provide some protection against voltage surges and built-up

static charges. Article 810 of the National Electrical Code, ANSI/

NFPA 70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

• Use No. 10 AWG (5.3 mm

) copper, No. 8 AWG (8.4 mm

)

aluminum, No. 17 AWG (1.0 mm

) copper-clad steel or bronze

wire, or larger, as a ground wire.

• Secure antenna lead-in and ground wires to house with

stand-off insulators spaced from 4-6 feet (1.22 -1.83 m)

apart.

• Mount antenna discharge unit as close as possible to where

lead-in enters house.

• Use jumper wire not smaller than No. 6A WG (13.3 mm

)

copper, or the equivalent, when a separate

antenna-grounding electrode is used. See ANSI/NFPA70.

• An outside antenna system should not be located in the vicinity of

overhead power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

• For added protection for this television during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the power outlet and disconnect it from the

antenna or cable system. This prevents damage to the television

due to lightning and power line surges.

• Do not overload wall outlets and extension cords, because

overloading can cause a fire or electric shock.

• Never push objects of any kind into this television through slots in

the case, as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the television.

• Do not attempt to service this television yourself, because opening

or removing covers may expose you to dangerous voltages or

other hazards. Refer all servicing to qualified service technicians.

• Unplug this television from the wall outlet and refer servicing to

qualified service technicians under the following conditions:

• When the power cord or plug is damaged or frayed.

• If liquid has been spilled into the television.

• If the television has been exposed to rain or water.

• If the television does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, because incorrect

adjustment of other controls may result in damage and often

requires extensive work by a qualified technician to restore

normal operation.

• If the television has been dropped or the case has been

damaged.

• When the television exhibits a distinct change in

performance.

• When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer that have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric shock,

or other hazards.

• Upon completion of any service or repairs to this television, ask

the service technician to perform routine safety checks to

determine that the television is safe to operate.

Note to cable television system installer

This reminder is provided to call the cable television system installer’s

attention to Section 820 40 of the NEC which provides guidelines for

proper grounding and, in particular, specifies that the cable ground shall

be connected to the grounding system of the building, as close to the

point of cable entry as practical.

Reference Grounding component

1 Electric service equipment

2 Power service grounding

electrode system

(NEC Art 250, Part H)

3Ground clamp

4 Grounding conductors (NEC

Section 810-21)

5 Antenna discharge unit (NEC

Section 810-20)

6Ground clamp

7 Antenna lead-in wire

Features

• High quality picture—Horizontal resolution more than 500

lines exceeds Super VHS (400 lines) or Laser Disc (430 lines) in

resolution.

• Compatibility with a wide range of audio outputs.

• Integrated digital tuner—You can view digital broadcasting

without using a Digital TV Set-Top Box.

• Closed caption decoder with full text mode—Displays text

captions or full screen text on the screen for hearing impaired

viewers.

• Picture adjustments using the remote control—The

on-screen display allows precise remote control adjustment of

brightness, contrast, color, tint, and sharpness.

• Programmable TV sleep timer—Operable from the remote

control, the television can be programmed for up to 120 minutes

to turn off automatically.

• V-Chip—The V-Chip function can read the rating of a television

program or movie content if the program is encoded with this

information. The V-chip allows you to set a restriction level.

• Stereo/SAP reception—This television is designed to receive

stereo and second audio program (SAP) broadcasts where

available.

• S-Video/Component video jacks—A VCR, DVD player, satellite

receiver, or other audio/video component can be connected to this

television.

• Video input jacks—This television is equipped with three (3)

types of video input jacks. The component video in jacks and

S-video in jack enable you to watch the DVD player or the video

devices with a high quality picture.

• On-Screen 3-language display—You can select one of three

languages—English, Spanish, or French—for on-screen

programming.

* Manufactured under license from Dolby Laboratories. “Dolby” and the

double-D symbol are trademarks of Dolby Laboratories.

Box contents

Verify that the box contains:

• Color television

• Remote control

• AAA batteries (2)

• User Guide

If any components are missing, contact Dynex immediately. Keep the box

and packing materials so that you can store or transport your television.

Parts and functions

Front

Back

Remote control

CHANNEL

buttons

POWER

button

Video/Audio

input jacks

Remote

sensor

VOLUME

buttons

No. Button Description

1 POWER Press to turn the television on. Press

again to turn the television off.

2Direct channel

selection (0-9)

Use to directly go to any channel.

3 -/DISPLAY When the television is receiving an

analog signal, press this button to

display the current information

on-screen. When the television is

receiving a digital signal, press this

button once to display the digital

information on-screen. Press this

button a second time to display the

analog information on-screen. To

remove the display from the screen,

press this button again. This button

is also the - button used when

selecting digital channels.

AUDIO (L/R)

OUT jack

AC power cord

RF IN

(VHF/

UHF) jack

S-VIDEO

IN jack

AUDIO (L/

R)/VIDEO IN

jacks

(VIDEO1)

COMPONENT

IN jacks

Setting up the television

Connecting your television to AC power

Use the AC polarized cord provided for operation on AC. Insert the AC

plug into a standard 120V 60 Hz polarized AC outlet.

Notes:

Never connect the AC plug to other than the specified voltage (120V 60 Hz).

Use the attached power cord only.

If the polarized AC cord does not fit into a non-polarized AC outlet, do not

file or cut the blade. It is your responsibility to have an electrician

replace the obsolete outlet.

If you cause a static discharge when touching the television and the

television fails to work, unplug the television from the AC outlet, then

plug it back in. The television should work normally.

Installing batteries in the remote control

Before using the remote control, you must install batteries. Use two AAA

size batteries. The batteries may last about one year depending on how

much the remote control is used. For best performance, we recommend

the batteries should be replaced on a yearly basis, or when the remote

operation becomes erratic. Do not mix old and new batteries or different

types.

To install batteries in the remote control:

1 Open the battery compartment cover.

2 Install two AAA batteries.

No. Button Description

4 SLEEP To set the television to turn off after

a preset amount of time, press the

SLEEP button. The clock counts up

ten minutes each time the button is

pressed in the order of 0, 10,

20...100, 110, 120 minutes. After the

sleep time is programmed, the

display disappears then reappears

momentarily every ten minutes to

remind you the sleep timer

function is operating. To confirm

the sleep time setting, press the

SLEEP button once and the

remaining time is momentarily

displayed. To cancel sleep time,

press the SLEEP button repeatedly

until the display turns to 0.

5 VOL + / - Press the + button to increase the

volume level. Press the - button to

decrease the volume level. Use

these buttons to select the desired

setting during the menu screen

operation.

6 MENU/ENTER Press to display the menu screen

function.

Press to enter or select operations

during operation of the menu

screen.

7 EXIT Press to remove the menu screen.

8 INPUT Press this button to display the

SOURCE SELECTION menu to

select the video input source.

9 RECALL Press this button to go back to the

previously viewed channel. Press

this button again to return to the

channel you were watching.

10 MUTE To turn off the sound, press this

button once. The television is

silenced and the symbol MUTE

appears on the screen. The muting

feature can be turned off by

pressing the MUTE button again or

one of the VOL + or - buttons.

11 CH + / -

Press the CH + (up)

button to change

to a higher numbered channel set

into memory. Press

the CH - (down)

button to change to a lower

numbered channel set into

memory. Use to select the desired

setting during menu operation.

12 ZOOM Press this button to change the

picture size.

13 AUDIO Press this button to select the

desired sound.

14 CCD Press this button to display the

CLOSED CAPTION menu.

15 TUNER Press this button to select the

analog/digital mode.

AC outlet

Wider hole and

blade

Polarized AC plug (one blade is wider

than the other.)

Setting up the television

3 Replace the battery compartment cover.

Battery precautions

Follow these precautions when using batteries in this remote control:

• Use only the size and type of batteries specified.

• Make sure to follow the correct polarity when installing the

batteries as indicated in the battery compartment. Reversed

batteries may damage the device.

• Do not mix different types of batteries together (such as alkaline

and carbon-zinc) or old batteries with fresh ones.

• If the remote is not to be used for a long period of time, remove

the batteries to prevent damage or injury from possible battery

leakage.

• Do not try to recharge batteries that are not intended to be

recharged. These batteries can overheat and rupture (follow

battery manufacturer's directions).

Connecting to an antenna

When shipped from the factory, the TV/CABLE menu option is set to the

CABLE (Cable Television) mode. If you are not using Cable TV, set this

menu option to the TV position.

If you are using an indoor or outdoor antenna, follow the instructions

that correspond to your antenna system. If you are using a cable

television service, see “Connecting to cable television” on page 6.

Combination VHF/UHF antenna (single 75 ohm

cable or 300 ohm twin-lead wire)

Connecting a combination VHF/UHL antenna with a twin-lead wire:

1 Connect the 75 ohm cable from the combination VHF/UHF

antenna to the RF IN jack.

2 If your combination VHF/UHF antenna has a 300 ohm twin-lead

wire, you may need to use a 300-75 ohm matching transformer.

Combination VHF/UHF antenna (separate VHF

and UHF 300 ohm twin-lead wires)

Connecting a combination VHF/UHL antenna with separate wires:

1 Connect the UHF 300 ohm twin-lead wire to the combiner (not

supplied).

2 Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm

matching transformer.

3 Attach the transformer to the combiner, then attach the combiner

to the RF IN jack.

Separate VHF/UHF antennas (75 ohm VHF cable

and 300 ohm UHF twin-lead wires)

Connecting separate VHF/UHL antennas:

1 Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire

to the combiner.

2 Attach the combiner to the RF IN jack.

Connecting to cable television

This television has an extended tuning range and can tune most cable

channels without using a cable television converter box. Some cable

television companies offer premium pay channels in which the signal is

scrambled. Descrambling these signals for normal viewing requires the

use of a descrambler device which is generally provided by the cable

television company.

For subscribers to basic cable television service

For basic cable service not requiring a converter/descrambler box,

connect the 75 ohm coaxial cable directly to the RF IN jack on the back of

the television.

For subscribers to scrambled cable television

service

Connecting the TV to cable television:

1 If you subscribe to a cable television service which requires the use

of a converter/descrambler box, connect the incoming 75 ohm

coaxial cable to the converter/descrambler box.

2 Using another 75 ohm coaxial cable, connect the output jack of

the converter/descrambler box to the RF IN jack on the television.

Follow the connections shown above.

3 Set the television to the output channel of the converter/

descrambler box (usually channel 3 or 4) and use the converter/

descrambler box to select channels.

RF IN jack

75 ohm coaxial

cable

300-75 ohm

matching

transformer

RF IN jack

300-75 ohm

matching

transformer

UHF 300 ohm

VHF 300 ohm

Combiner

RF IN jack

VHF 75 ohm

UHF 300 ohm

Combiner

RF IN jack

75 ohm coaxial

cable

RF IN jack

75 ohm

cable to TV

Incoming 75 ohm

cable TV cable

Converter/Descrambler

Setting up the television

For subscribers to unscrambled basic cable

television service with scrambled premium

channels

If you subscribe to a cable television service in which basic channels are

unscrambled and premium channels require the use of a converter/

descrambler box, you may wish to use a signal splitter and an A/B switch

box (available from the cable television company or an electronics supply

store). Follow the connections shown above.

With the switch in the B position, you can directly tune any

nonscrambled channels on your television. With the switch in the A

position, tune your television to the output of the converter/descrambler

box (usually channel 3 or 4) and use the converter/descrambler box to

tune scrambled channels.

Connecting to other equipment

The exact arrangement you use to interconnect various video and audio

components to the television is dependent on the model and features of

each component. Check the owner's manual provided with each

component for the location of video and audio inputs and outputs.

The following connection diagrams are offered as suggestions. You may

need to modify them to accommodate your particular assortment of

components. The diagrams are intended to show component video and

audio interconnections only.

Selecting the video input source:

1 Press INPUT to view a signal from another device connected to

your television, such as a VCR or DVD player. You can select ANT,

VIDEO1, VIDEO2 (on the front panel), or COMPONENT depending

on which input jacks you used to connect your devices.

2 Press INPUT on the remote control to display the current signal

source. Press the channel

CH + / -- buttons or the 0 through 4

number buttons to select the desired mode.

Connecting the television to a VCR

Connecting the television to a VCR with an

S-Video cord

If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the

rear of the television, you must also connect the audio cords to the

AUDIO IN jacks on the rear of the television. The S-VIDEO cord only carries

the video signal. The audio signal is separate.

Note:

When the S-video cord and the video cord are connected to each jack at the

same time, the S-video cord takes precedence over the video cord.

Connecting the television to a DVD player or

satellite receiver

If your DVD player or satellite receiver has an S-Video out jack, connect

cords as shown.

Connecting the television to a DVD player with

component video

If your DVD player has component video out jacks, connect your

television to a DVD player using a component video cord. It can greatly

enhance picture quality and performance.

Incoming 75 ohm

cable TV cable

75 ohm

cable to TV

RF IN jack

Converter/

Descrambler

Splitter

A/B Switch

To Audio/ Video

OUT

Audio/ Video

cord (not

supplied)

To Audio/

Video IN

Rear of the TV

S-Video cord

(not supplied)

To S-Video IN

Rear of the TV

To S-Video

OUT

Audio cord (not

supplied)

To Audio OUT

Audio cord (not

supplied)

To S-Video OUT

To Audio IN

To S-Video IN

S-Video cord

(not supplied)

Rear of the TV

Setting up the television

Note:

This television is only capable of displaying 480i interlaced signal when

connected to a digital device with component video outputs. If you

input a 480p, 720p, or 1080i signal to the component video inputs,

COMPONENT is displayed on a black screen. If COMPONENT appears,

set the digital device's component output to 480i.

Connecting the television to a DTV receiver or

set-top box

If you connect a DTV receiver/set-top box, connect your television to it by

using a component video cord.

Connecting the television to an AV amplifier

The exact configuration to connect various video and audio components

to the television depends on the model and features of each component.

Check the owner’s manual provided with each component for the

location of video and audio inputs and outputs.

Connecting the television to a camcorder

To play back from a camcorder, connect the camcorder to the television

as shown.

Connecting the television to a video game

console

The television can also be used as a display device for many video games.

However, due to the wide variety of signals generated by these devices

and subsequent connection variations required, they have not all been

included in the suggested connection diagrams. You'll need to consult

each component's owner's manual for additional information.

Using the menu

To access the menu using the TV buttons:

• Press both of the CH and CH buttons at the same time. The

menu screen appears.

To access the menu using the remote control:

• Press MENU/ENTER. The menu screen appears.

To Audio

OUT

Audio cord

(not supplied)

Component

OUT

COMPONENT IN

Rear of the TV

To Audio IN

Video cord (not

supplied)

To Component OUT

Video cord (not

supplied)

Audio

OUT

Audio

cord (not

supplied)

Rear of the TV

To Audio IN

Audio cord (not

supplied)

Amplifier

Rear of the TV

Audio/Video cord (not

supplied)

To Audio/Video OUT

Front of the TV

To Audio/Video OUT

Audio/Video cord (not

supplied)

Front of the TV

Video Game

Console

Setting up the television

To select a setting using the TV buttons:

•Use the CH and CH buttons and the VOL and VOL

buttons.

To select a setting using the remote control:

•Use the CH + and CH - buttons and the VOL + and VOL - buttons.

Setting the language

You can choose from three different languages (English, French, and

Spanish) for the on-screen displays.

To select a menu language:

1 Press MENU/ENTER. The menu screen appears.

Note:

If no buttons are pressed for more than 60 seconds, the menu screen returns

to normal television operation automatically.

2 Press the VOL + and VOL - buttons to select SETUP menu.

3 Press the CH + and CH - buttons to select LANGUAGE, then press

the VOL + button.

4 Press the VOL + and VOL - buttons to select the desired language:

• English (ENGLISH),

• French (FRANÇAIS), or

• Spanish (ESPAÑOL).

5 Press EXIT to return to the normal screen.

Memorizing channels

This television is equipped with a channel memory feature which allows

channels to skip up or down to the next channel set into memory,

skipping over unwanted channels. Before selecting channels, they must

be programmed into the television’s memory.

To use this television with an antenna, set the TV/CABLE menu option to

the TV mode. When shipped from the factory, this menu option is in the

CABLE mode.

Selecting TV or cable

To select TV or cable input:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the SETUP menu.

3 Press the CH + and CH - buttons to select TV/CABLE.

4 Press the VOL + and VOL - buttons to select TV or CABLE.

• TV—VHF/UHF channels

• CABLE—Cable television channels

5 Press EXIT to return to the normal screen.

Note:

It may take a few seconds for a digital channel picture to appear on screen

after being selected.

CABLE CHART

The following chart is typical of many cable system channel allocations.

The number on the top is the number on the television. The number or

letter on the bottom is the corresponding cable channel.

Automatic memory tuning

Memorizing channels is best accomplished during evening “primetime”

hours, as more channels are broadcasting digital signals. Memorizing

channels can only be accomplished while a station is broadcasting a

digital signal to set the channel into memory.

If you are not sure of the digital channels available in your area, visit

www.antennaweb.org to find a list based on your address or zip code.

To automatically memorize channels:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the SETUP menu,

then press the CH + and CH - buttons to select AUTO CH

MEMORY.

3 Press the VOL + button. The television begins memorizing all of

the channels available in your area.

After completing analog tuning, digital tuning starts

automatically. Depending on the reception condition, it may take

from 15 to 30 minutes to complete memorizing digital cable

channels. Depending on the condition of the reception, the BAR

display may not advance for several minutes.

Note:

Some new channels may be added. You should complete the AUTO CH

MEMORY procedure periodically.

Adding and deleting channels

To add or delete analog channels:

1 Press TUNER to select the Analog mode.

2 Press MENU/ENTER. The menu screen appears.

3 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select ADD/DELETE.

4 Press the VOL + button. The ADD/DELETE menu appears.

5 Select the desired channel to be memorized or deleted using the

CH + and CH - buttons.

6 Press the VOL + and VOL - buttons to select ADD or DELETE.

7 Repeat steps 5-6 for other channels you want to add or delete.

8 Press EXIT to return to the normal screen.

To add or delete digital channels:

1 Press TUNER to select the Digital mode.

2 Press MENU/ENTER. The menu screen appears.

3 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select DIGITAL SETUP.

4 Press the VOL + button. The DIGITAL SETUP menu appears.

5 Press the CH + and CH - buttons to select ADD/DELETE, then

press the VOL + button. The ADD/DELETE (DTV) menu appears.

6 Press the CH + and CH - buttons to select ADD/DELETE, then

press the VOL + button.

7 Select the desired channel to be memorized or deleted using the

CH + and CH - buttons.

8 Press the VOL + and VOL - buttons to select ADD or DELETE.

9 Repeat steps 6-8 for other channels you want to add or delete,

then press MENU/ENTER.

10 Press MENU/ENTER repeatedly to return to the normal screen.

To add a digital channel you are watching:

1 Press TUNER to select the Digital mode. Use the number buttons

to directly select the digital channel you want to add.

2 Press MENU/ENTER. The menu screen appears.

3 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select DIGITAL SETUP.

4 Press the VOL - button. The DIGITAL SETUP menu appears.

5 Press the CH + and CH - buttons to select ADD/DELETE, then

press the VOL - button. The ADD/DELETE (DTV) menu appears.

6 Press the CH + and CH - buttons to select ADDING CHANNEL,

then the VOL + button.

7 Press MENU/ENTER repeatedly to return to the normal screen.

8 Repeat steps 1-7 for other channels you want to add directly.

Using the TV

Notes:

If you select a channel with no broadcast signal, the sound is automatically

muted.

If a station you are viewing stops broadcasting, the television automatically

shuts itself off after 15 minutes.

To use the television:

1 Press POWER to turn on the television.

2 Adjust the volume level by pressing the VOL and VOL

buttons on the TV or the VOL + and VOL - buttons on the remote

control. The volume level is indicated on the screen by green bars.

As the volume level increases, so do the number of bars. If the

volume decreases, the number of green bars also decreases.

3 Set the TV/CABLE menu option to the appropriate position (see

“Selecting TV or cable” on page 9).

4 Press the direct channel selection buttons to select the channel.

Selecting analog channels

When the TV/CABLE menu option is the TV position, all channels can be

instantly selected by using two buttons. For example, to select channel

2, press 0, then 2. If you press only 2, channel selection will be delayed

for a few seconds. For channels 10 and above, press the two digits in

order.

When the TV/CABLE menu option is the CABLE position, channels can be

selected as follows:

Selecting digital channels

To select digital channels, press the channel number in order. When – is

contained in the channel number, press the first three digits, then press

–/DISPLAY, followed by the remaining three digits. For example, to

select channel 015-001, press 0 1 5 – 0 0 1. Note the following:

• If a channel is selected with only audio content, “AUDIO ONLY” will

be displayed on the screen.

• If a channel is selected with a weak digital signal, “DIGITAL

CHANNEL SIGNAL STRENGTH IS LOW” will be displayed on the

screen.

• If the digital channel has the same analog channel, you may be

able to watch the same channel on analog.

• If a channel is selected to which you have not subscribed, “DIGITAL

CHANNEL IS ENCRIPTED” will be displayed on the screen.

Seeking channels

To seek the next channel:

• Press and release the CH + and CH - buttons. The channel

automatically stops at the next channel set into memory.

For proper operation, before seeking channels, channels should be set

into the memory. See “Memorizing channels” on page 9.

Viewing information

Note:

The screen automatically returns to normal TV operation after 10 seconds.

To view program information:

1 Press -/DISPLAY to display the current information on the screen.

When the television receives a digital signal, the digital

information appears:

• Broadcast program name

• Station name

• Remaining time

•Audio language

•Program name

•V-Chip rating

•V-Chip mark

When the television receives an analog signal, –/DISPLAY shows

only analog information.

2 Press –/DISPLAY again. The analog information appears.

•Clock

• Channel number or video mode selected

• Channel label (if preset)

• Stereo or SAP (second audio program) audio status

•Picture size

3 Press –/DISPLAY again to clear the call display.

Viewing the previous channel

The RECALL button allows you to go back to the last channel viewed.

Press RECALL again to return to the last channel you were watching.

Muting the volume

To mute the volume:

1 Press MUTE to turn off the sound. The television’s sound is

silenced and MUTE appears on the screen.

2 Switch the sound back on by pressing MUTE again or by pressing

the VOL + or VOL – button.

Using sleep

To set the sleep function:

To set the television to turn off after a preset amount of time, press

SLEEP on the remote control. The clock counts up ten (10) minutes for

each press of the SLEEP button (0, 10, 20...100, 110, 120).

After the sleep time is programmed, the display appears briefly every ten

minutes to remind you that the sleep timer is operating. To confirm the

sleep timer setting, press SLEEP and the remaining time is displayed for

a few seconds. To cancel the sleep timer, press SLEEP repeatedly until

the display turns to 0.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing

violent scenes or pictures that you may choose to exclude. The restriction

applies to TV rating and movie rating if this data is transmitted. You may

set this restriction separately. To use the V-Chip function, you must set a

password.

Notes:

The V-Chip function is activated only on programs and input sources that

have the rating signal.

It may take several minutes to complete the initial V-Chip setup.

To avoid forgetting the password, write it down and keep it in a safe place.

However, if you forget the password,

Channels Press

1-9 Press 0 twice, then 1-9 as needed.

Example: to select channel 2, press 0 0 2.

10-12 Press 0, then the remaining 2 digits.

Example, to select channel 12, press 0 1

13-99 Press the 2 digits in order.

Example, to select channel 36, press 3 6.

100-125 Press the 3 digits in order. Example, to

select channel 120, press 1 2 0.

TV Cable

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) (W)

37-59 (AA) (WW)

60-85 (AAA) (ZZZ)

86-94 (86) (94)

95-99 (A-5) (A-1)

100-125 (100) (125)

01 (5A)

Using the TV

--Set the volume to the minimum setting, then press the volume down

button on the TV and the 0 button on the remote control at the

same time.

--Hold for more than two seconds, then reset the password

Setting a password

To set a password:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the OPTION menu.

3 Press the CH + and CH - buttons to select V-CHIP.

4 Press the VOL + button. The password entering screen appears.

5 Select and enter a password (4 digits) using the 0-9 number

buttons, then press MENU/ENTER.

6 Enter the same password again to confirm, then press MENU/

ENTER to set the password.

7 Press EXIT to return to the normal screen.

Setting the V-Chip

To set the V-Chip:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the OPTION menu.

3 Press the CH + and CH - buttons to select V-CHIP.

4 Press the VOL + button. The password entering screen appears.

5 Enter your 4-digit password using the 0-9 number buttons, then

press MENU/ENTER. The V-CHIP menu appears.

6 Press the CH + and CH - buttons to select V-CHIP SET, then press

the VOL + button. The V-CHIP SET menu appears.

7 Press the CH + and CH - buttons to select TV RATING, then press

the VOL + and VOL - buttons to display the desired rating.

• OFF—TV RATING is not set

• TV-Y—All children

• TV-Y7—7 years old and above

• TV-G—General audience

• TV-PG—Parental guidance

• TV-14—14 years old and above

• TV-MA—17 years old and above

When you select TV-Y7, TV-PG, TV-14, or TV-MA, press -/DISPLAY

to further define the rating. Press the CH + and CH - buttons to

select the desired rating you want. Press the VOL + and VOL -

buttons to select the setting ON or OFF.

8 Press the CH + and

CH - buttons to select MOVIE RATING, then

press the VOL + button. The RATING menu appears.

9 Press the CH + and CH - buttons to select the rating, then press

the VOL + and VOL - buttons to select ON or OFF for each rating.

• G—All ages

• PG—Parental guidance

• PG-13—Parental guidance less than 13 years old

• R—Under 17 years old parental guidance suggested

• NC-17—17 years old and above

• X—Adult only

10 Press MENU/ENTER twice to return to the V-CHIP menu, then

press the CH + and CH - buttons to select V-CHIP.

11 Press the VOL + and VOL - buttons to elect ON. Your settings are

now set into memory.

12 Press EXIT to return to the normal screen.

Watching a protected show

To watch a program that is blocked by the V-Chip:

1 Press MUTE.

2 Enter the password, then press MENU/ENTER.

After you enter the password correctly, the protection is

temporarily overridden. If the television is turned off, or if the

channel is changed, the V-Chip restriction is reactivated.

Changing the password

To change the password:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select V-CHIP.

3 Press the VOL + button to display the password entering mode.

Use the number buttons (0-9) to enter your password, then press

MENU/ENTER. The V-CHIP menu appears.

4 Press the CH + and CH - buttons to select CHANGE PASSWORD,

then press the VOL + button to display a blank password screen.

5 Enter a new password using the number buttons (0-9), then press

MENU/ENTER.

6 Enter the same password again to confirm, then press MENU/

ENTER.

7 Press EXIT to return to the normal screen.

Downloading the additional V-Chip rating

system

As a supplement to the standard V-Chip rating system, your television is

equipped to download an additional rating system, if such a system

becomes available in the future.

Notes:

You can only download the additional V-Chip rating system when your

television is receiving a digital signal.

When you download the additional rating system, it may take some time

for the download to occur.

The V-Chip rating information and system are not determined or not

controlled by the television or Dynex.

The downloadable V-Chip rating system is an evolving technology;

therefore, availability, content, and format may vary.

The standard V-Chip rating system is available whether your television is

receiving a digital signal or not, and will block both analog and digital

programs. To set program blocking using the standard V-Chip rating

system, select V-CHIP in step 5.

To download the additional V-Chip rating system (when available):

1 Press TUNER to select the Digital mode.

2 Press MENU/ENTER. The menu screen appears.

3 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select V-CHIP.

4 Press the VOL + button to display the password entering mode.

Use the number buttons (0-9) to enter your password, then press

MENU/ENTER. The V-CHIP menu appears.

5 With the television receiving a digital signal, press the VOL + and

VOL - buttons to select V-CHIP SET (DTV), then press the CH -

button.

6 If the television is not storing the additional rating system, the TV

will begin downloading the new rating system. This may take

some time to download completely.

7 Press the CH + and CH - buttons to select RRT SET, then press the

VOL + button.

8 Set your preferences for the content rating limits for the additional

rating system.

Setting the clock

Note:

After a power failure or disconnection of the power, the clock settings will

be lost. When this happens, reset the present time.

To set the clock:

1 Press MENU/ENTER, then press the VOL + and VOL - buttons to

select the SETUP menu.

2 Press the CH + and CH - buttons to select CLOCK SET, then press

the VOL + and VOL - buttons. The CLOCK SET menu appears.

Using the TV

3 Press the VOL + and VOL - button to set the MONTH, then press

the VOL + button.

4 Set the DAY, YEAR, and TIME as in step 3.

5 After setting the date and time, the clock begins functioning

automatically.

6 Press EXIT to return to the normal screen.

Setting the picture size

You can view 480i format programs in three picture sizes—4:3, 16:9,

and ZOOM.

You can change the picture size by pressing the PICTURE SIZE button on

the remote control.

• If receiving an analog signal, you can choose 4:3 or 16:9 picture

size.

• If receiving a digital signal of 4:3, you can choose 4:3 picture size

only.

• If receiving a digital signal of 16:9, you can choose 4:3, 16:9, or

ZOOM.

4:3 picture size

To fill the screen, the top and bottom edges are extended more widely,

although the center of the picture remains near the former ratio.

If receiving a 4:3 format program, the image is displayed in its originally

formatted proportion.

16:9 picture size

This image displays the size of standard 16:9 with black bars at the top

and bottom.

If receiving a 4:3 format program, the image is displayed with black bars

at the top and bottom and stretched wider.

Note:

If a fixed black bar remains on the screen for long periods of time, the image

can become permanently engrained in the screen and cause subtle but

permanent ghost images. Never leave your television on for long

periods of time while it is displaying these images.

ZOOM picture size (for 16:9 format programs)

The entire picture is uniformly enlarged—it is stretched the same

amount both wider and taller (retains its original proportion). The right

and left edges of the picture may be hidden.

Adjusting the picture

Note:

The CONTRAST default setting is set to maximum at the factory.

To adjust the picture:

1 Press MENU/ENTER, then press the VOL + and VOL - buttons to

select the PICTURE menu.

2 Press the CH + and CH - buttons to select the item you want to

adjust.

3 Press the VOL + and VOL - buttons to adjust the setting.

4 After modifying your desired setting, press EXIT to return to

normal screen.

Resetting your picture adjustment

The RESET function returns your picture quality adjustments to the

following factory settings:

To reset the picture adjustment:

1 Press MENU/ENTER, then press the CH + and CH - buttons to

select the PICTURE menu.

2 Press the CH + and CH - buttons to select RESET, then press the

VOL + button.

Note:

When you press RESET in the PICTURE menu, the picture adjustments

return to the factory preset levels.

Controlling closed captioning

This television has the capability to decode and display closed captioned

television programs. Closed captioning displays text on the screen for

hearing-impaired viewers or translates and displays text in another

language.

Captions: This closed caption mode displays text on the screen in

English or another language. Generally, closed captions in English are

transmitted on C1 and closed captions in other languages are

transmitted on C2.

Text: The text closed caption mode usually fills ½ of the screen with a

programming schedule or other information.

Notes:

ZOOM

Item < >

BRIGHTNESS decrease increase

CONTRAST decrease increase

COLOR paler color brilliant color

TINT reddish tint greenish tint

SHARPNESS softer picture clearer picture

Item Value

BRIGHTNESS center (0)

CONTRAST max (32)

COLOR center (0)

TINT center (0)

SHARPNESS center (0)

Using the TV

If the program or video you select is not closed-captioned, no captions

display on-screen.

If text is not available in your viewing area, a black rectangle may appear

on-screen. If this happens, set the closed caption feature to OFF.

When selecting closed captions, the captioning delays about ten seconds.

If no caption signal is received, no captions appear, but the television

remains in the caption mode.

Misspellings or unusual characters may occasionally appear during closed

captioning. This is normal with closed captioning, especially with live

programs. This is because during live programs, captions are also

entered live. These transmissions do not allow time for editing.

When captions are being displayed, on-screen displays, such as volume and

mute, may be seen but may interfere with closed captions.

Some cable television systems and copy protection systems may interfere

with the closed captioned signal.

If using an indoor antenna or if television reception is very poor, the closed

caption decoder may not appear or may appear with strange characters

or misspelled words. In this case, adjust the antenna for better reception

or use an outdoor antenna.

To turn on closed captions (analog mode):

1 Tune the television to the desired program in analog mode.

2 Press MENU/ENTER, then press the VOL + and VOL - buttons to

display the OPTION menu.

3 Press the CH + and CH - buttons to select CLOSED CAPTION.

Press the VOL - button to display the CLOSED CAPTION menu.

Notes:

Depending on the broadcast signal, some analog captions function with a

digital broadcast signal.

This screen can be displayed by pressing CCD.

4 Press the CH + and CH - buttons to select the desired closed

caption mode, then press MENU/ENTER.

• To view captions, select C1 or C2. C1 displays translation of the

primary language in your area. If the program or video you

selected is not closed captioned, no captions will display on

screen.

• To view text, select T1 or T2. If text is not available in your

viewing area, a black rectangle may appear on screen. If this

happens, set the Closed Caption feature to OFF.

• To turn the closed caption feature off, select OFF.

5 Press EXIT to return to the normal screen.

To turn on closed captions (digital mode):

1 Tune the television to the desired program in digital mode.

2 Press MENU/ENTER, then press the VOL + and VOL - buttons to

display the OPTION menu.

3 Press the CH + and CH - buttons to select CLOSED CAPTION.

Press the VOL + button to display the CLOSED CAPTION menu.

4 Press the CH + and CH - buttons to select ANALOG CAPTION or

DIGITAL CAPTION.

5 Press the VOL + and VOL - buttons to select the desired closed

caption mode, then press MENU/ENTER.

6 Press EXIT to return to the normal screen.

Adjusting closed captioning

Closed captions are factory preset. However you can adjust them

individually. This feature is designed to customize digital captions only.

Note:

Do not set the closed caption TEXT COLOR and BACKGROUND COLOR the

same, or you will not be able to see the text.

To adjust closed captioning:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the OPTION menu.

3 Press the CH + and CH - buttons to select DIGITAL SETUP, then

press the VOL + button.

4 Press the CH + and CH - buttons to select CC ADVANCED, then

press the VOL + button. The CC ADVANCED menu appears.

5 Press the CH + and CH - buttons to the item you want to adjust,

then press the VOL + button.

6 Press the CH + and CH - buttons to select the setting, then press

MENU/ENTER.

You can select from among the following items and parameters.

• TEXT SIZE: AUTO, SMALL, STANDARD, LARGE

• TEXT TYPE: AUTO, DEFAULT, MONO W. SERIF, PROP W. SERIF,

MONO W/O. SERIF, PROP W/O. SERIF, CASUAL, CURSIVE, SMALL

CAPITALS

• TEXT COLOR: AUTO, BLACK, WHITE, RED, GREEN, BLUE,

YELLOW, MAGENTA, CYAN

• TEXT EDGE: AUTO, NONE, RAISED, DEPRESSED, UNIFORM, LEFT

DROP SHADOW, RIGHT DROP SHADOW

• BACKGROUND COLOR: AUTO, BLACK, WHITE, RED, GREEN,

BLUE, YELLOW, MAGENTA, CYAN

7 Press MENU/ENTER repeatedly until the menu screen is cleared.

Selecting Stereo/Second Audio Program

(SAP)

The multi-channel TV sound (MTS) feature provides high-fidelity stereo

sound. MTS also can transmit a second audio program (SAP) containing a

second language or other audio information. When the television

receives a stereo or SAP broadcast, the word STEREO or SAP displays

on-screen every time you turn the television on, change the channel, or

press -/DISPLAY.

To select Stereo/Second Audio Program:

1 Press MENU/ENTER in the analog mode, then press the VOL +

and VOL - buttons to select the OPTION menu.

2 Press the CH + and CH - buttons to select SAP, then press the VOL

+ and VOL - buttons to select OFF or ON.

3 Press EXIT to return to the normal screen.

To listen to stereo sound:

Notes:

When the television is turned on or a channel is selected, STEREO appears

on the screen, indicating that stereo broadcasting is available. When

only mono broadcasting is available, there is no indicator on the screen.

You can enjoy stereo sound from the left and right speakers.

1 if the broadcasting signal is not strong enough, or clear stereo

sound is not available, press the AUDIO button on the remote

control to change to mono. This should eliminate any noise.

2 Press the AUDIO button again to return to stereo.

To listen to a second audio program (SAP):

1 When the television is turned on or a channel is selected,

SAP appears on the screen, indicating that Second Audio

Program (SAP) is available.

2 Press the AUDIO button on the remote control, then select the

desired SAP setting, using the following table as a guide.

Broadcast SAP setting Audio display

MONO OFF MONO

ON MONO

STEREO OFF STEREO <->MONO

ON STEREO <->MONO

MONO+SAP OFF MONO

ON SAP

STEREO OFF STEREO <->MONO

ON SAP

Specifications

Selecting the audio language

When two or more audio languages are included in a digital signal, you

can select one of the audio languages.

To select the audio language:

1 Press TUNER to select the Digital mode.

2 Press MENU/ENTER. The menu screen appears.

3 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select DIGITAL SETUP.

4 Press the VOL + button. The DIGITAL SETUP menu appears.

5 Press the CH + and CH - buttons to select AUDIO LANGUAGE,

then press the VOL + button. The AUDIO LANGUAGE menu

appears.

6 Press the CH + and CH - buttons to select the desired language,

then press MENU/ENTER.

7 Press MENU/ENTER repeatedly until the menu screen is cleared.

Checking the digital signal strength

This television allows you to view the digital signal meter for digital

channels.

Notes:

The signal meter feature is not available for analog channels.

After four minutes, the SIGNAL METER screen returns to normal

television-operation automatically.

To check the digital signal strength:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select DIGITAL SETUP.

3 Press the VOL + button. The DIGITAL SETUP menu appears.

4 Press the CH + and CH - buttons to select SIGNAL METER, then

press the VOL + button to check the strength of the digital signal.

5 Press MENU/ENTER repeatedly until the menu screen is cleared.

Using the auto shut-off feature

When the auto shut-off feature is on and a station being viewed stops

broadcasting, the television will shut off automatically 15 minutes after

broadcasting stops.

To use the auto shut-off feature:

1 Press MENU/ENTER. The menu screen appears.

2 Press the VOL + and VOL - buttons to select the OPTION menu,

then press the CH + and CH - buttons to select AUTO SHUT OFF.

3 Press the CH + and CH - buttons to select ON or OFF.

4 Press EXIT to return to the normal screen.

Specifications

Design and specifications are subject to change without notice.

Power supply AC 120V, 60 Hz

Power Consumption

Operation 110 Watts

Standby 3 Watts

Chassis Construction

Weight 77.2 lbs. (35.0 kg)

Width 20-1/8 inches (740 mm)

Height 22-1/2 inches (571.5 mm)

Depth 19-1/4 inches (489.5 mm)

Inputs

VIDEO 1 V (p-p)/75 ohms

AUDIO –8 dBm/50k ohms

S-VIDEO Y: 1 V (p-p), 75 ohms

C: 0.286 V (p-p), 75 ohms

COMPONENT Y: 1 V (p-p), 75 ohms

PR: 0.7 V (p-p), 75 ohms

PB: 0.7 V (p-p), 75 ohms

Output

AUDIO –8 dBm/50k ohms

Other

Antenna input VHF/UHF In 75 ohm coaxial

Picture tube 27 inches (676.0 mm diagonal)

Tuner type NTSC Standard

ATSC Standard (8VSB), QAM

Receiving channels VHF 2-13

UHF 14-69

CABLE TV 14-36 (A)-(W)

37-59 (AA)-(WW)

60-85 (AAA)-(ZZZ)

86-94 (86)-(94)

95-99 (A-5)-(A-1)

100-125 (100)-(125)

01 (5A)

Speakers 2 inches (50.8 mm) x 3-1/2 inches

(88.9 mm), 8 ohm x 2

Sound output power 1.0 W + 1.0 W

Troubleshooting

Use the following checklist for troubleshooting when you have problems

with your television. Consult your local dealer or service outlet if

problems persist. Be sure all connections are properly made when using

with other units.

Legal notices

Regulatory statements

Federal Communications Commission

Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician

for help.

Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

Canadian Notice

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Enterprise Services, Inc. Other brands and product names are trademarks

or registered trademarks of their respective holders. Specifications and

features are subject to change without notice or obligation.

For service and support call (800) 305-2204.

Problem Solution

Television does not

operate.

• Make sure the power cord is plugged in.

• Try another AC outlet.

• Power is off. Check fuse or circuit breaker.

• Unplug television for an hour, then plug it back in.

Poor sound or no

sound.

• Station or cable experiencing problems. Tune to

another station.

• Check sound adjustments (volume and mute).

• Check for sources of possible interference.

Poor picture or no

picture.

• Station or cable experiencing problems. Tune to

another station.

• Make sure channels are set into memory.

• Check antenna or cable connections. Adjust the

antenna.

• Check for sources of possible interference.

• Check picture control adjustments.

Poor reception on

some channels.

• Station or cable experiencing problems. Tune to

another station.

• Make sure channels are set into memory.

• Station is weak. Adjust the antenna to receive the

desired station.

• Check for sources of possible interference.

Poor color or no

color.

• Station or cable experiencing problems. Tune to

another station.

• Make sure channels are set into memory.

• Check picture control adjustments.

• Check antenna or cable connections. Adjust the

antenna.

• Check for sources of possible interference.

Picture wobbles or

drifts.

• Station or cable experiencing problems. Tune to

another station.

• Make sure channels are set into memory.

• Cable company is scrambling signal.

• Adjust antenna.

Digital

broadcasting

screen problem.

• Check digital signal strength.

No CATV reception.

• Check all cable connections.

•Set TV/CABLE menu option to the CABLE mode.

• Station or cable system problems. Try another

station.

Horizontal or

diagonal bars on

screen.

• Check antenna connections.

• Adjust or re-direct antenna.

• Check for sources of possible interference.

No reception above

channel 13.

• Make sure the TV/CABLE menu option is in the

appropriate mode.

• If using an antenna, check the UHF antenna

connections.

No remote

operation.

• Batteries are weak, dead, or inserted incorrectly.

• Remote is out of range. Move closer to television

(within 15 feet).

• Make sure the remote is aimed at the sensor.

• Confirm there are no obstructions between the

remote and the television.

• Make sure the power cord is plugged in.

Television shuts off.

• No broadcast on tuned station.

• Sleep timer is set.

• Power interrupted.

Closed Caption is

not activated.

• Television station experiencing problems or

program is not closed captioned. Try another

channel.

• Check cable connection or VHF/UHF antenna.

Reposition or rotate antenna.

• Set closed caption decoder in the menu.

Display is not

shown in your

language.

• Select correct language in the menu options.

Legal notices

90-Day Limited Warranty

Dynex Products (“Dynex”) warrants to you, the original purchaser of this new 27” MTS

Stereo Color Television with Digital Tuner (“Product”), that the Product shall be free

of defects in the original manufacture of the material or workmanship for a period of 90

days from the date of your purchase of the Product (“Warranty Period”). This Product

must be purchased from an authorized dealer of Dynex brand products and packaged

with this warranty statement. This warranty does not cover refurbished Product. If you

notify Dynex during the Warranty Period of a defect covered by this warranty that

requires service, terms of this warranty apply.

How long does the coverage last?

The Warranty Period lasts for 90 days from the date you purchased the Product. The

purchase date is printed on the receipt you received with the product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship

of the Product is determined to be defective by an authorized Dynex repair center or store

personnel, Dynex will (at its sole option): (1) repair the Product with new or rebuilt parts;

or (2) replace the Product at no charge with new or rebuilt comparable products or parts.

Products and parts replaced under this warranty become the property of Dynex and are

not returned to you. If service of Products and parts are required after the Warranty

Period expires, you must pay all labor and parts charges. This warranty lasts as long as

you own your Dynex Product during the Warranty Period. Warranty coverage terminates

if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a retail store location, take your original receipt and the

Product to the store you purchased it from. Make sure that you place the Product in its

original packaging or packaging that provides the same amount of protection as the

original packaging. If you purchased the Product from an online web site, mail your

original receipt and the Product to the address listed on the web site. Make sure that you

put the Product in its original packaging or packaging that provides the same amount of

protection as the original packaging.

To obtain in-home warranty service for a television with a screen 25 inches or larger, call

1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will

have a Dynex-approved repair person dispatched to your home.

Where is the warranty valid?

This warranty is valid only to the original purchaser of the Product in the United States

and Canada.

What does the warranty not cover?

This warranty does not cover:

• Customer instruction

•Installation

•Set up adjustments

• Cosmetic damage

• Damage due to acts of God, such as lightning strikes

• Accident

•Misuse

•Abuse

•Negligence

•Commercial use

• Modification of any part of the Product

• Plasma display panel damaged by static (non-moving) images applied for

lengthy periods (burn-in).

This warranty also does not cover:

• Damage due to incorrect operation or maintenance

• Connection to an incorrect voltage supply

• Attempted repair by anyone other than a facility authorized by Dynex to service

the Product

• Products sold as is or with all faults

• Consumables, such as fuses or batteries

• Products where the factory applied serial number has been altered or removed

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.

DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT

NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST

PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO

THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING,

BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION

TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND

JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM

STATE TO STATE OR PROVINCE TO PROVINCE.

Contact Dynex:

For customer service please call 1-800-305-2204

www.dynexproducts.com

DYNEX

is a registered trademark of Best Buy Enterprise Services, Inc.

Distributed by Best Buy Purchasing, LLC.

Dynex, 7601 Penn Avenue South, Richfield, Minnesota, U.S.A.

90-Day Limited Warranty

Table des matières

Dynex DX-R27TV

Téléviseur couleur MTS de

27 po avec syntoniseur

numérique

Table des matières

Instructions de sécurité importantes.............................................. 18

Fonctionnalités .............................................................................. 20

Configuration du téléviseur ............................................................21

Fonctionnement du téléviseur ....................................................... 26

Spécifications................................................................................. 32

Problèmes et solutions................................................................... 32

Avis juridiques ................................................................................33

Garantie limitée..............................................................................35

Instructions de sécurité

importantes

Avertissement:

Afin de réduire le risque d’incendie et de choc électrique, ne pas exposer cet

appareil à la pluie ou l’humidité.

Importantes mesures de sécurité

• Lire l'intégralité de ces instructions.

• Ces instructions doivent être conservées pour une utilisation

ultérieure.

• Débrancher le téléviseur de la prise de courant avant tout

nettoyage. Utiliser un chiffon sec pour le nettoyage. Ne pas utiliser

de nettoyants liquides ou en aérosol.

• Pour écarter tous dangers, n'utiliser que des accessoires

recommandés par le fabricant du téléviseur.

• Ne pas utiliser ce téléviseur à proximité de l'eau (baignoire, évier

ou piscine).

• Ce téléviseur ne doit pas être placé

sur une table, une étagère ou un

chariot instables. Le téléviseur peut

dans sa chute blesser sérieusement

un enfant ou un adulte et être

gravement endommagé.

• Les fentes et ouvertures sur les

côtés, au dos et au bas du boîtier

sont prévues pour la ventilation,

pour assurer un fonctionnement fiable du téléviseur et le protéger

contre toute surchauffe.

Ces ouvertures ne doivent être ni bloquées ni obstruées. Elles ne

doivent jamais être bloquées en installant le téléviseur sur un lit,

un sofa, une moquette ou toute autre surface semblable. Ce

téléviseur ne doit jamais être positionné à proximité ou sur un

radiateur, ou une bouche de chauffage.

Il ne doit pas non plus être installé dans un meuble encastré tel

qu'une bibliothèque, sauf si une ventilation adéquate est

installée.

• Ce téléviseur doit fonctionner conformément à la source

d'alimentation indiquée sur les étiquettes. En cas d'incertitude sur

la tension d'alimentation de la maison, consulter le revendeur ou

la compagnie d'électricité.

• Ce téléviseur est équipé d'une prise de courant CA polarisée (à

deux plots, un plus large que l'autre). Cette fiche ne s'insère dans

une prise secteur que d'une seule façon. Il s'agit d'un dispositif de

sécurité. S'il est impossible d'introduire à fond la fiche dans la

prise secteur, essayer de retourner la prise. Si la fiche ne s'adapte

toujours pas à la prise secteur, contacter un électricien afin qu'il

remplace la prise inadéquate. Ne pas chercher à modifier le

dispositif de sécurité de la prise polarisée.

• Le cordon d'alimentation de ce téléviseur ne doit pas se trouver

dans un lieu de passage et aucun objet ne doit reposer dessus.

• Respecter tous les avertissements et instructions apposés sur le

téléviseur.

Attention

Tous changements ou modifications qui ne

seraient pas expressément approuvés par les

responsables de l’application des règles FCC

pourraient rendre nul le droit de l’utilisateur

d’utiliser cet équipement.

Attention

Pour éviter les chocs électriques, ne pas utiliser

la prise polarisée avec une prise de rallonge ou

d’autres prises à moins que les plots ne s’y

enfoncent entièrement.

CAUTION:

TO REDUCE THE RISK OF

ELECTRIC

SHOCK, DO NOT REMOVE

COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

Avertissement sur la table roulante

(symbole fourni par RETAC)

Instructions de sécurité importantes

• Si l'appareil est connecté à une antenne extérieure ou à un réseau

câblé, s'assurer que l'antenne ou la connexion au réseau câblé est

mise à la terre afin de bénéficier d'une certaine protection contre

les sautes de courant et les charges électrostatiques L'article 810

du Code national de l'électricité (CNE), ANSI/NFPA 70, fournit des

informations relatives à la mise à la terre correcte du mât et du

support, la mise à la terre du fil conducteur de l'antenne à l'unité

de décharge de l'antenne, la taille des conducteurs de mise à la

terre, l'emplacement de l'unité de décharge de l'antenne, la

connexion aux conducteurs de terre ainsi que les normes en

matière de prise de terre.

• Utiliser des fils en cuivre n° 10 AWG (5,3 mm

), en aluminium

n° 8 AWG (8,4 mm

), en acier cuivré ou en bronze n° 17 AWG

(1 mm

) ou plus gros comme fils de terre.

• Raccorder le fil conducteur de l'antenne et les fils de terre à la

maison au moyen d'isolateurs muraux espacés de 1,22 à

1,83 m (4 à 6 pi).

• Monter le fil conducteur de l'antenne aussi près que possible

du point d'entrée de la maison.

• Utiliser un cavalier d'au moins la taille d'un fil de cuivre n° 6A

WG (13,3 mm

) ou équivalent lorsqu’un conducteur de terre

d’antenne séparé est utilisé. Voir ANSI/NFPA70.

• L'antenne externe ne doit pas être située près de lignes

électriques aériennes ni à un emplacement où elle pourrait

tomber sur de tels circuits ou lignes électriques. Lors de

l'installation d'une antenne externe, faire très attention de ne pas

toucher de telles lignes électriques ou circuits car tout contact

peut être mortel.

• Pour protéger le téléviseur pendant un orage ou s'il se trouve

inutilisé et sans surveillance pendant de longues périodes, le

débrancher de la prise secteur et débrancher l'antenne ou la

connexion au réseau câblé. Ceci évitera d'endommager l'appareil

en cas de foudre et de variations de tension du secteur.

• Les prises murales et les rallonges ne doivent pas être surchargées,

ce qui pourrait provoquer des risques d'incendie ou de choc

électrique.

• N'enfoncer en aucun cas un objet dans les ouvertures du boîtier du

téléviseur qui pourrait entrer en contact avec des tensions

dangereuses ou provoquer un court-circuit à l'origine d'un

incendie ou d'un choc électrique. Ne jamais répandre un liquide

sur le téléviseur.

• L'utilisateur ne doit pas essayer de réparer ce téléviseur lui-même,

en effet son ouverture ou le démontage des couvercles peut

l'exposer à des tensions dangereuses et à d'autres dangers. Toutes

les réparations doivent être effectuées par du personnel qualifié.

• Débrancher ce téléviseur de la prise secteur et utiliser les services

d'un technicien qualifié dans les conditions suivantes:

• Lorsque le cordon d'alimentation est effiloché ou la prise

endommagée.

• Si un liquide a été répandu sur le téléviseur.

• Si le téléviseur a été exposé à la pluie ou à l'eau.

• Si le téléviseur fonctionne anormalement en appliquant les

instructions d'utilisation. Ne régler que les commandes

décrites dans les instructions d'utilisation; en effet, un réglage

incorrect d'autres commandes pourrait provoquer des

détériorations entraînant souvent d'importantes réparations

par un technicien qualifié afin de rétablir un fonctionnement

normal.

• Si le téléviseur est tombé ou si le boîtier a été endommagé.

• Détérioration marquée des performances du téléviseur.

• Si des pièces doivent être remplacées, vérifier que le technicien a

utilisé des pièces spécifiées par le fabricant ayant les mêmes

caractéristiques que celles d'origine. Toute substitution par des

pièces non autorisées peut provoquer un incendie, un choc

électrique ou d'autres dangers.

• Les réparations ou la maintenance ayant été effectuées, demander

au technicien de réaliser les contrôles de sécurité de routine afin

de déterminer que ce téléviseur peut fonctionner sans danger.

Avis à l'installateur de TV câblée

Le présent avis a pour objet de rappeler à l'installateur de systèmes de

câblodistribution que l'article 820 40 du Code national de l'électricité

(CNE) contient des recommandations relatives à la mise à la terre de

l'appareil et, en particulier, stipule que la masse du câble doit être

connectée au système de mise à la terre de l'immeuble, aussi près que

possible du point d'entrée du câble.

Référence Composant de mise à la terre

1 Équipement de la compagnie

d'électricité

2 Système de mise à la terre des

électrodes de la compagnie

d'électricité

(CNE Art. 250, Section H)

3 Serre-fil de mise à la terre

4 Conducteurs de mise à la terre

(CNE, Section 810-21)

5 Unité de décharge de l'antenne

(CNE, Section 810-20)

6 Serre-fil de mise à la terre

7 Fil conducteur de l'antenne

La page charge ...

Dynex CRT Television DX-R27TV Manuel utilisateur

Marque: Dynex

Modèle: CRT Television DX-R27TV

Catégorie: Téléviseurs LCD

Taper: Manuel utilisateur

Ce manuel convient également à

DX-R27TV

Télécharger le PDF

rapport

dans d''autres langues

English: Dynex CRT Television DX-R27TV User manual
español: Dynex CRT Television DX-R27TV Manual de usuario

Dynex CRT Television DX-R27TV Manuel utilisateur

Ce manuel convient également à

Dynex CRT Television DX-R27TV Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents