Lenco DIR-110 Manuel utilisateur

Version: 1.0

Model

DIR-110

USER MANUAL

Internet Radio

HANDLEIDING

Internetradio

BEDIENUNGSANLEITUNG

Internetradio

MODE D’EMPLOI

Radio internet

MANUAL DEL USUARIO

Radio por Internet

Version: 1.0

Index:

English .................................................................................................................................................... 3

Nederlands ........................................................................................................................................... 18

Deutsch ................................................................................................................................................ 34

Français ................................................................................................................................................ 51

Español ................................................................................................................................................. 67

Version : 2.0

3

English

DIR-110

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm

(2”) free space around the whole device.

4. Install in accordance with the supplied user manual.

5. * Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the

cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep

the entire device out of children’s reach! When playing with the power cable, they can

seriously injure themselves.

6. * Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other

heat-generating products or naked flame.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart

the device following the instruction manual. During file transmission, please handle with care

and operate in a static-free environment.

10. Warning! Never insert an object into the product through the vents or openings. High voltage

flows through the product and inserting an object can cause electric shock and/or short circuit

internal parts. For the same reason, do not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked several times before

leaving the factory, it is still possible that problems may occur, as with all electrical appliances.

If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you

should disconnect the plug from the main power socket immediately.

14. This device must operate on a power source as specified on the specification label. If you are

not sure of the type of power supply used in your home, consult your dealer or local power

company.

15. * The socket outlet must be installed near the equipment and must be easily accessible.

16. * Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.

17. * Devices with class 1 construction should be connected to a main socket outlet with a

protective earthed connection.

18. * Devices with class 2 construction do not require a earthed connection.

19. Keep away from rodents. Rodents enjoy biting on power cords.

20. * Always hold the plug when pulling it out of the main supply socket. Do not pull the power

cord. This can cause a short circuit.

21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove

severe stains, you may use a damp cloth with dilute detergent.

23. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

24. Do not interrupt the connection when the device is formatting or transferring files. Otherwise,

data may be corrupted or lost.

4

25. If the unit has USB playback function, the usb memory stick should be plugged into the unit

directly. Don’t use an usb extension cable because it can cause interference resulting in failing

of data.

26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects

filled with liquids, such as vases, are placed on or near the apparatus.

27. * To completely disconnect the power input, the mains plug of the apparatus shall be

disconnected from the mains, as the disconnect device is the mains plug of apparatus.

28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine,

fire or the like.

29. Attention should be drawn to the environmental aspects of battery disposal.

30. The apparatus can only be used in moderate extremely cold or climates warm environments

should be avoided.

31. The rating label has been marked on the bottom or back panel of the apparatus.

32. This device is not intended for use by people (including children) with physical, sensory or

mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or

have received instructions about the correct use of the device by the person who is responsible

for their safety.

33. This product is intended for non professional use only and not for commercial or industrial use.

34. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an

unstable position or by failure to follow any other warning or precaution contained within this

user manual will not be covered by warranty.

35. Never remove the casing of this apparatus.

36. Never place this apparatus on other electrical equipment.

37. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive

dust or vibration.

38. Do not allow children access to plastic bags.

39. Only use attachments/accessories specified by the manufacturer.

40. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as the power supply cord or the plug, when liquid has been

spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

41. *Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or

electric shock.

42. Prolonged exposure to loud sounds from personal music players may lead to temporary or

permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.

• *Do not connect the unit to the mains before checking the mains voltage and before all other

connections have been made.

*Those instruction are related only to products using power cable or AC power adaptor.

5

2. Product Overview

6

1. Display

2. Standby

3. Mode

4. Home

5. Fav

6. Sleep

7. Left

8. Alarm

9. Right

10. Vol/Nav/Ok: Rotate=Vol/Scroll

Press=Select

11. Power on/off

12. DC-IN

13. Line-out (3.5mm)

14. Aux-in (3.5mm)

15. USB Socket

16. Antenna

7

Remote Control

1.

Remote Transmitter

2.

Standby button

3-12.

Input letters and numbers

13.

Up Cursor button

14.

Left cursor button

15.

Right cursor button

16.

Enter button

17.

Down cursor button

18.

Play/Pause button

19.

Stop button

20.

Home button

8

21.

Vol+/-

22.

Go back/forward one track

23.

Mode selection button

24.

Alarm setting button

25.

Mute button

26.

Dimmer button

27.

Sleep button

28.

Fav button

29.

Language selection button

30.

Fav+ button

31.

EQ set tone

3. INITIAL USE

Before operation, please make sure that the VOLTAGE mentioned on the power supply is same as

the voltage of your local area.

Use the supplied mains adaptor to connect the device to a household mains socket.

Switch the device on with the power switch on the rear.

When it is the first time running the device, the system will ask you to set Language and Network

Configurations. You may setup the network connection immediately, or set it later. Use Navigate to

select the desired option. Press Navigate/OK to confirm.

Press Standby button when unit is power on, unit will go to standby mode. Press again will make it

On again.

9

4. Network configuration

1. Normal network configration

Select “Yes” for the normal Wireless Network Configuration: The select the required AP by turning

“Navigate” and confirm it by pressing “Navigate/OK”.

Enter WEP or WPA code to connect the WiFi network by select the correct character turning the

“Navigate/OK” button.

Press button to select the next character.

In this condition, press button you can turn left and delete the left chracters at the same time:

When the password is complete please press “Navigate/OK” button to confirm.

Note: Below characters are available for the radio:

Numbers (from 0-9)

English letters (from A to Z and from a to z)

Other charcters (DEL, @, Blank, !, ”, #, $, %, &, *, ’, + and (,)

2. WPS PBC network configuration

Select “Yes WPS” when you would like set up with Wireless Network (WPS PBC) feature: If you are

using a router with WPS button, you may set up the network connection simple via WPS function.

Enter it and go to press the WPS button on your router within 120 seconds.

The connection between the router and the Radio will then be configured automatically.

Select “No” when you do not want to install the network at the moment.

3. No network configuration

Pls select “NO” when you do not like to congigure the network connection at the moment.

Press “Standby” for standby. When the actual date and time is shown the network is configuration is

well done. Date and time, as well as alarms-if activated-will still are shown on the display when in

standby mode.

10

5. INTERNET RADIO

Switch on “Standby” and rotate Navigate to scroll through the main menu. Press OK (to enter sub

menus or confirm settings)

Press to return to the previous menu.

After the connection of any station is succeeded, station information’s will be shown: infomation

content can be changed with or button.

My Favorites

List of my favorite preset stations. It supports 250 favorite entries including stations and folder.

During the station playing screen, press and hold Fav on the device or “Fav. +” on the remote control

to save the station as my favorite. You may replace the previous saved station to the new one.

If the Selected station have been saved, you cannot save it again. The saved stations are showed

under this menu. You may also press Fav to enter the saved station list. You may enter the number

key on the remote control to recall the saved station.

Under the preset station list, move to your station, press OK from unit or Enter from remote control

to listen.

Enter its submenu with button, Shift Up/Down along the list, Rename, Play, or Use as Alarm

Sound (if you chose internet as alarm sound in alarm configuration).

Radio Station/Music

Station are categorized into Global Top 20, Genre and Country/Location (Australia, Canada, United

Kingdom, USA). Enter to continue the subcategories and choose the station to listen.

For each station, press OK from unit or Enter from remote control to play directly.

Press to enter its submenu. When you choose Auto Scan, it becomes the playback of marquee

of each station in the subcategory. Each station plays 30 seconds until all have played or you press

“Select” to stop the marquee listening. Press button to view the display information of the

playing station.

Local Radio:

Stations are categorized to the country/location which the unit is operated.

History:

List of the ten recently listened stations.

Service:

Search radio station-Enter your keyword to search radio station from the list.

Add new radio by adding IP address, the added stations will be stored in My Favorite.

Note that the maximum character of the station name is 250.

6. Media Center

Select the USB/UPnP mode or playlist mode with Navigate/OK or with the Mode button.

11

UPnP

If you have set up shared media, you should see the shared media from UPnP.

If you have more than one computer sharing media, the alternatives are listed.

Select the shared media you want to play.

Use Play/Pause (18), Next/Prev (22) and Stop (19). Press Right cursor button (15) to view the display

information of the playing track.

Note: The radio can only read the track with the file name less than40charaters. the characters

should be in European Language. If you encounter failure of reading the track under UPnP mode,

youmay try to rename the file. However, if the track is still unable to play, you can try converting the

file to different formats.

USB:

From this point on, menus are generated from the folders on the USB device. It can support

WMA/MP3/AAC/AAC+/FLAC/WAV format. FLAC can support 16Bit/8K~48K Sample Rate, 64Kbps.

Brows folders with the NAV wheel or direction keys (13/14/15/17) on the remote control.

The display shows folder and file names (not necessarily track names).

Once you have found a track you want to play, press the navigate wheel on the device or press Enter

on the remote control.

Note: The USB port does not support data transfer with a computer.

My Playlist:

You can create a playlist of favourious music from UPnP. When you playing the music, press and hold

OK from unit or Enter from remote control to save it into My Playlist.

Clear My Playlist

Pls select this option for clearing the playlist. Pls confirm the questions.

7. My media U

Display and playback your own mediaU station list on the mediaU server. Set your account first.

Toactivate your own station list, follow the steps below:

Access http://www.mediayou.net/. Join my mediaU membership. Login to the website;

Enter the wireless MAC addresss of Radio to the mediaU website. This information can be obtained

in information Center > System information > Wireless Info;

When successfully configured, you are able to save and view your own mediaU station playlist(s).

Usename and password are not required to enter to the Radio.

If there are different accounts stored in Radio, you can choose the one you currently use under

Configuration menu. On the website, you may save stations to Favorite Station, set Favorite

Location/Genre and My Local City, or add stations manually. The stations can be viewed from My

Media mode on the Radio.

12

8. Information Center

Weather

There are weather information and forecasts for 2000 cities.

Select the country and then the city for the weather details.

Press / to see the weather forecasts.

The device is able to display the weather information on the standby mode. On the weather

information page, press Select to set the city to displaying on the standby mode. Then turn on the

weather display.

Financial Info

View the stock index

System Infomation

View details of units and of connect network. The information includes MAC address which you are

required to fill in when registration of “my mediaU” membership.

9. CONFIGURATION

Time Display

Analog/digital

My MediaU

When it is enabled, My mediaU will exist on the main menu. If various

mediaU accounts exist in the Radio, Select the default login account in here.

Network

Wireless Network Configuration: Enable/disable WiFinetwork. When you

enable the WiFi network, the system will automatically select the required

AP. Enter WEP or WPA code to connect the WiFi.

Wireless Network (WPS PBC): If you are using a router with WPS/QSS

button, you may set up the network connection simple via WPS function.

Enter it and go to press the WPS/QSS button on your router within

120 seconds. The connection between the router and Music Link will then

be configured automatically.

Manual Configuration: You can choose DHPC (which IP assigned

automatically) or manually input IP address for wireless network

connection. When you select manual setting for wired connection, the

following have to be entered: SSID (nameof access point), IP Address,

subnet mask, default gateway, preferred DNS server, alternate DNS server.

Check Network When Power On: Enable/disable WiFinetwork. When you

enable the WiFinetwork, the system will automatically search the available

AP. Select required AP.

Date & Time

Setup the date and time

Set time format display as 12 Hour or 24 Hour

Set date format (YYYY/MM/DD-DD/MM/YYYY-MM/DD/YYYY)

Daylight SavingTime (DST)

₀ ON

Tips: On the model of “ON”, the time will be one hour More than the actual

time.

13

₀ OFF

Tips: On the model of “OFF”, the time will be same as the actual time. If it

was on the model of the “Daylight Saving Time (DST) and you choose “OFF”,

the time will be deducted one hour, that’s to say, the time will be same as

the actual time.

Alarm

There are three independent alarms-2 alarms of absolute time setting

(Alarm 1 and Alarm 2) and 1 alarm for relative time setting (Alarm NAP).

Press Alarm on the remote control to enter this menu directly.

Note that the alarm source is from the preset Internet radio if Alarm Sound

is set to be Internet Radio. It can only set one same IR station for Alarm 1

and Alarm 2. When the alarm is reached the unit connects to the Internet if

the set network is available. Therefore there may be some delay from the

alarm to the radio play. If no network is connection can be established

within one minute, the alarm will change to Melody automatically.

When Alarm “NAP” is set, it alarms once in 5/10/20/30/60/90/120 minutes

depending on which one you have set.

Choose Alarm Volume to configure the volume of the alarms.

Timer

Countdown timer (max. 100min)

Language

English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/

Svenska/Norske/Dansk/Magyar/Cesky/Slovensky/Polski/Turkce/Suomi

Dimmer

Turn on/Backlight level

Display

color/monochrome

Power Mgmt

Configure to go to standby mode automatically during in the menu or/and

without Wifisignal. Choose the power management timer (5/15/30mins) to

set the duration of the radio to switch standby mode automatically when

you are not controlling it. Choose Turn off to ignore the power management

function.

Sleep Timer

Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once

the time is set, there will be a bed icon with remaining minutes at the top

right corner and the device will turn to standby then. Press Sleep on the

remote control for the shortcut of this function.

Buffer

Configure the buffer time of the music playback, 2/4/8 seconds.

Weather

Activate/deactivate the weather forecast for the standby display. Choose

your preferred temperature unit (°F or °C) and then proceed entering your

location. When activated, the weather forecast is shown in turns with the

clock display on the standby screen (each 10 secs).

Local Radio Setup

There is a shortcut Local Radio under Internet Radio so that you can easily

go to the station list of your location. You may Manual Setup your location,

or let the system Auto Detect your current location. The system detects the

location according to the IP address of your connected network. Press Local

Station to enter this local radio list directly.

Playback Setup

Select the playback mode of media center-Off (no repeat or shuffle),

Repeat all, Repeat one, or Shuffle.

Device

Default device name for DLNA is “AirMusic”. You may rename it for DLNA

setup on th PC or mobile. QR code for downlode and install “AirMusic”

control App.

Equalizer

Default equalizer is Normal, you may change to Flat, Jazz, Rock,

Soundtracks, Classical, Pop, or News. Press EQ on the remote control to

swap among the EQ mode for shortcut.

14

Resume When

Power On

The system is default to resume internet radio playback if you were

listening to internet radio or media center before switch off the unit. If turn

this setting off, the system will remain in the main menu when switching on

the unit.

Software Update

Update software. If there is an updated software version on the server, the

system will notify you. Before starting a software upgrade, ensure that the

unit is plugged into a stable mains power connection. Disconnecting power

during a software update may permanently damage the unit.

Reset to Default

Restore the default settings. After the DIR-100 is reset, the system will

move to language is elected.

10. DLNA/UPnP

You may change the default DLNA name as you like. Theinformationbelow is the

introductionofhowtosetup media streaming from PC or other media server. Study the own

instruction of the software or apps you use to enjoy music streaming if necessary. Make sure the

music files are in the format of MP3, WHA, WAV or AAC for music streaming to the radio.

UPnP

Connect the PC to the network.

Ensure the Radio is powered on and connected to the same network.

Open the UPnP platform Windows Media Player (11 or later). Alternatively, other platforms or

serversuch as Windows Media Connection may be used.

Allow to share your media to Radio.

Add the audio files and folders you want to share with radio to the media library.

You may also enjoy the streaming music from other music server, such as smart phone (Android

platform)

Connect the mobile to the network

Search and install media sharing apps from Google Play.

Add the audio files from your mobile you want to share.

After setup the shared server, choose the music and control playback on the Radio.

DLNA

Besides UPnP, Radio supports DLNA function, you share the music files from PC or Android mobile,

and you use your PC, Android mobile or iPhone/iPad to control music playback on the Radio. (It is

not required to control each playback on the Radio.)

The PC system requirement for DLNA is Windows 7 and Windows Media Player 12. Setup as below:

First, share the media on your PC to Radio.

Control Panel > Network and Internet > Network and Sharing Center > Change Advanced Sharing >

Media streaming options

15

Open Windows Media Player to enable Allow remote control of my Player.

Right click any music in the library and choose Play to Radio.

There will be a window for controlling music playback on Radio.

You may search and install any free or commercial DLNA apps from Google Play or Apple Store if you

are using Android mobile, tablet or iPhone/iPad. It is suggested to use bubble UPnP, Twonky Beam

on Android mobile, tablet or Twonky Beam on iPhone/iPad. Some apps may not support streaming

music from iPhone/iPod but iPhone/iPod could still be used to control streaming music from other

servers.

Procedures for playing shared music on the app are as follows:

Select Radio as the player. Some apps may allow to play the music to multi players at the same time.

Select music server and choose the music. Some app can create a playlist if you choose several music.

Please note: When using DLNA music streaming function on theInternetRadio, youcan only control

the volume and standby via the unit. It is restricted to control the other functions. StopDLNA on PC,

mobile or tabletbefore you resume Internet radio’s own control.

11. AUX (Line input)

Aux in mode plays audio from an external source such as an MP3 player. To play audio with Aux in mode:

Turn the volume low on both the Radio and if adjustable, the audio source device.

Connect the external audio source to the AUX IN 3.5mm stereo socket.

Either press MODE until the display, shows AUX IN or select AUX in under Main menu.

Adjust the volume of the Radio (and, ifnecessary, the audio source device) as required.

12. FM operation

With your radio on, press the Mode button to select FM mode or press / button to select

FM mode in the menu.

Press the / button to manually tune to specific frequencies by 0.05MHz per step.

The radio also includes the scan feature of FM, allowing you to automatically tune to FMstations.

Press and holdthe button to automatically search for the next available radio station. When a

station with good signal is found, it will be automatically played.

You can search for stations in the opposite direction by pressing and holding the button.

Press the Navigate/OKrotary knob, it can automatically scan fully and store the 20 stations (the

max).

Storing stations as presets

Radio can store 20 stations as presets in FM mode. To store a preset:

Tune to the station you like, press and hold the Fav button, then using the / button or

rotate the Navigate/OKrotary knobto select desired preset number, then press Vol/Nav/Okrotary

knob to store the station.

16

Playing stations saved as presets

To play a preset station:

Select the band FM of the station by pressing the Mode button or press / button to select

FM mode in the menu.

Press the Fav button to recall the preset station, then using the / button or rotate the

Navigate/OKrotary knobto browse through your presets and press the Navigate/OKrotary knob to

confirm.

13. Technical Specifications

Network

802.11b/g/n (WLAN) Encryption: WEP, WPA, WPA 2 (PSK),

WPS

Streaming

UPnP, DLNA

Supported filetypes

WMA, MP3

Connections

DC, USB (charging 5V 0.5A), 3.5mm AUX-IN, 3.5mm Line-Out

Input

100-240V~50/60 Hz, 0.5A max

Output

5.9V/2A

Batteries in remote control

2 x AAA (non included)

Power consumption

5W

Power consumption (standby)

<1W

Network stand-by power

consumption

<2W

Operating Temperature

0°C-35°C

Operating position

Horizontal

Power supply adaptor: (For EU only)

Manufacturer: Shenzhen Adition Audio Science & TechnologyCo, Ltd

Model Number: AD120592000EU

Use only original AC adaptor

Use only the power supply listed in the user instructions.

Dim. unit

235 x 116 x 130 mm (WxDxH)

Weight

1kg

14. Guarantee

Lenco offers service and warranty in accordance with the European law, which means that in case of

repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lencodirectly. Important

note: If this unit is opened or accessed by a non-official service center in any way, the warranty

expires. This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

15. Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the

instruction, specifications and pictures in this documentation may differ slightly from your particular

situation. All items described in this guide for illustration purposes only and may not apply to particular

situation. No legal right or entitlements may be obtained from the description made in this manual.

17

16. Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be

disposed of as general household waste in Europe. To ensure the correct waste

treatment of the product and battery, please dispose them in accordance to any

applicable local laws of requirement for disposal of electrical equipment or

batteries. In so doing, you will help to conserve natural resources and improve

standards of environmental protection in treatment and disposal of electrical

waste (Waste Electrical and Electronic Equipment Directive).

17. Service

For more information and helpdesk support, please visit www.lenco.com

Lenco Benelux BV, Thermiekstraat1a, 6361 HB, Nuth, The Netherlands.

18

Nederlands

DIR-110

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd in deze

documentatie kan leiden tot blootstelling aan schadelijke straling.

Dit apparaat dient uitsluitend te worden aangepast of gerepareerd door gekwalificeerd

onderhoudspersoneel.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Gebruik dit apparaat niet in de buurt van water.

2. Reinig het uitsluitend met een licht vochtige doek.

3. Bedek of blokkeer de ventilatie-openingen niet. Wanneer u het apparaat op een schap plaatst,

dient u 5 cm (2”) vrije ruimte rondom het gehele apparaat te behouden.

4. Installeer het product volgens de meegeleverde gebruikershandleiding.

5. * Nooit op de stroomadapter stappen of deze indrukken. Wees voornamelijk voorzichtig in de

buurt van de stekkers en het punt waar de kabel uit het apparaat komt. Plaats geen zware

voorwerpen op de stroomadapter, om beschadiging ervan te voorkomen. Houd het gehele

apparaat buiten bereik van kinderen! Wanneer kinderen met de voedingskabel spelen, kunnen

zij ernstig letsel oplopen.

6. * Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere tijd niet

gebruikt.

7. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen, kachels,

kaarsen en andere hittegenererende producten of naakte vlam.

8. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

9. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het

apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de

gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en doe dat in een

omgeving zonder statische verstoringen.

10. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het

product. Er is hoogspanning in het product aanwezig en als u er een object insteekt, kan dat

een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen. Mors om

dezelfde reden geen water of vloeistof op het product.

11. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in de buurt

van zwembaden.

12. Gebruik dit apparaat niet wanneer condensatie kan optreden.

13. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren geïnspecteerd is

voordat het de fabriek verlaat, is het nog steeds mogelijk dat er problemen optreden, zoals met

alle elektrische apparaten. Als u rook, een overmatige hitteontwikkeling of enig ander

onverwacht verschijnsel opmerkt, moet u onmiddellijk de stekker van het netsnoer uit het

stopcontact halen.

14. Dit apparaat moet aangedreven worden door een voedingsbron, zoals aangegeven op het

specificatieplaatje. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis, raadpleeg

dan a.u.b. uw dealer of plaatselijk energiebedrijf.

15. * Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en eenvoudig te

bereiken zijn.

16. * Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan brand of een elektrische

schok veroorzaken.

17. * Apparaten met een Klasse 1 structuur dienen te worden aangesloten op een stopcontact met

een beschermende aardverbinding.

18. * Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.

19. Houd ze uit de buurt van knaagdieren. Knaagdieren knauwen graag aan voedingskabels.

19

20. * Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt. Trek nooit aan de

voedingskabel. Dit kan tot een kortsluiting leiden.

21. Vermijd om het toestel te plaatsen op een ondergrond die blootgesteld kan worden aan

trillingen of schokken.

22. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen oplosmiddelen of

op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met verdund

schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.

23. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt door

storing, misbruik, modificatie van het apparaat of batterijvervanging.

24. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden overdraagt.

De gegevens kunnen anders corrupt of verloren raken.

25. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick rechtstreeks op

het apparaat worden aangesloten. Gebruik geen USB-verlengkabel, omdat die kan leiden tot

storingen met foutieve gegevens als gevolg.

26. Het apparaat mag niet worden blootgesteld aan druppels of spatten en zorg ervoor dat er geen

met vloeistof gevulde voorwerpen, zoals vazen, op of nabij het apparaat zijn geplaatst.

27. * Om de verbinding met de stroomaansluiting volledig te verbreken, moet de stekker van het

apparaat uit het stopcontact worden gehaald, omdat de stekker van het apparaat de

hoofdschakelaar is.

28. Indien het apparaat op batterijen kan werken, dan mogen de batterijen niet aan overmatige

hitte, zoals zonlicht, open vuur e.d. worden blootgesteld.

29. Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.

30. Het apparaat kan alleen worden gebruikt in gematigde klimaten. Extreem koude of warme

omgevingen moeten worden vermeden.

31. Het nominale specificatielabel is te vinden op het paneel aan de onder- of achterkant van het

apparaat.

32. Dit apparaat is niet bestemd voor gebruik door mensen (inclusief kinderen) met fysieke,

zintuiglijke of geestelijke gebreken of gebrek aan kennis en ervaring, tenzij zij onder toezicht

staan of instructies hebben over het juiste gebruik van het apparaat hebben gekregen van de

persoon die verantwoordelijk is voor hun veiligheid.

33. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel of

industrieel gebruik.

34. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade, veroorzaakt

door het gebruik van dit product in een onstabiele positie, of door het niet naleven van

waarschuwingen of voorzorgsmaatregelen genoemd in deze handleiding, valt niet onder de

garantie.

35. Verwijder nooit de behuizing van dit apparaat.

36. Plaats dit apparaat nooit op andere elektrische apparatuur.

37. Dit product niet gebruiken of opslaan op plaatsen waar het wordt blootgesteld aan direct

zonlicht, hitte, buitensporig veel stof of trillingen.

38. Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.

39. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.

40. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is vereist als het

toestel hoe dan ook is beschadigd, zoals bijvoorbeeld het netsnoer of de stekker, wanneer er

vloeistof of een voorwerp in het apparaat is terechtgekomen, wanneer het apparaat is

blootgesteld aan regen of vocht, als het niet normaal werkt of is gevallen.

41. * Gebruik nooit een beschadigde voedingskabel of stekker of een los stopcontact. Dit vormt

namelijk een risico op brand of elektrische schokken.

42. Langdurige blootstelling aan luid geluid van persoonlijke muziekspelers kan leiden tot tijdelijke

of permanente gehoorbeschadiging.

INSTALLATIE

• Pak alle onderdelen uit en verwijder de beschermende materialen.

• * Sluit het apparaat niet aan op het stopcontact, voordat u de netspanning hebt gecontroleerd

en voordat alle andere aansluitingen zijn gemaakt.

*deze instructies zijn enkel van toepassing voor producten met een voedingskabel of een AC

voedingsadapter.

20

2. Productoverzicht

La page charge ...

Lenco DIR-110 Manuel utilisateur

Lenco DIR-110 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents