MODWAY EEI-6111-OAK Assembly Instructions

Taper
Assembly Instructions
Assembly is complete. The Bookcase is ready to enjoy now!
MAX
10
Kgs
MAX
10
Kgs
MAX
10
Kgs
WARNING
Children have died from furniture tipover.
To reduce the risk of furniture tipover:
ALWAYS install tipover restraint provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb or
hang on drawers, door or shelves.
NEVER open more than one drawer at a
time.
Place heaviest items in the lowest drawer.
This is a permanent label.
Do not remove!
ATTENTION
Les enfants sont morts de basculement
dans les meubles. Réduire les risques de
renversement de meubles:
TOUJOURS installer la retenue de
renversement fournie.
NE JAMAIS installer de téléviseur sur ce
produit.
Ne JAMAIS LAISSER les enfants se tenir
debout, grimper ou s'accrocher aux tiroirs,
aux portes ou aux étagères.
NE JAMAIS ouvrir plus d’un tiroir à la fois
Placez les articles les plus lourds dans le
tiroir le plus bas.
Ceci est une étiquette permanente.
Ne pas enlever!
Los niños han muertopor vuelco de
muebles. Para reducir el riesgo de
vuelco de muebles:
SIEMPRE instale la restricción del vuelco
provista.
NUNCA cologue un televisor en este
producto.
NUNCA permita que los niños se paren,
trepen o cuelguen en cajones, puertas o
estantes.
NUNCA abra más de un cajón a la vez.
Coloque los artículos más pesados en los
cajón más bajo.
¡No Quitar!
ADVERTENCIA
ANTI TIPPING WARNING LABEL
Customer Service 908-368-1025 www.modway.com
TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE
AA1 x 2 AA2 x 4 AA3 x 4 AA4 x 4
2 4
AA2
Different wall materials require unique wall fasteners.
The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only.
Please consult your local hardware store to ensure you are using the correct hardware for your wall type.
1
1. Attach bracket (AA1) securely to the back top of the furniture using screw (AA4) provided. Allow 8 - 10 cm from each side.
2. Please make a hole for wall plugs position on the wall and minimum 15 mm below bracket secured to the back of unit attach the wall
plugs (AA2).
3. Locate the other bracket (AA1) on the wall over wall plugs (AA2). Place furniture into position so both brackets (AA1) are vertically in the
line.
4. Lace the end of the restraints strap through the larger hole in each brackret. Ensure the restraints strap with grids surface facing the inner
loops. Bring both ends together and slide the flat end through the locking end and draw it through until all slack is removed.
5. Make sure that the strap is securely laced & locked.
Installation Instructions :
AA4 AA1
AA1
AA3
4
5
Grids Surface
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35

MODWAY EEI-6111-OAK Assembly Instructions

Taper
Assembly Instructions

dans d''autres langues