Schwinn 240 Le manuel du propriétaire

Marque: Schwinn

Modèle: 240

Taper: Le manuel du propriétaire

Ce manuel convient également à

Schwinn® 140/240Exercise Bikes

\\\ _

Ver p_gina 2

• @ ® - @ • . @ • @

003-3235-110609B

Para obtener este manual en Espafiol Latino Americano vaya a:

http://www.sc hwinnfitness.com.

Table of Contents

Important Safety Instructions 3 User Setup

Specifications 5 Workout Programs

Features 6 Pausingor Stopping

Console 7 ConsoleSetup Mode

RemoteHeart Rate Monitor 9 Maintenance

Operations 11 Troubleshooting

Adjustments 11 Contacts

QuickStart/Manual Program 12 Manuel du Propri6taire

TMand® indicate a trademark or registered trademark. Nautilus, Inc. (www.nautilus.com) trademarks include

NAUTILUS®, BOWFLEX®,STAIRMASTER®,SCHWlNN® and UNIVERSAL®and respective Iogos.

Other trademarks arethe property of their respective owners.

Patent Information This product maybe covered byUSand Foreign Patents and Patents Pending.

Important Safety Instructions

_, This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Before using this equipment, obey the following warnings:

_, Readand understand the complete Owner's Manual. Keep Owner's Manual for future reference

Readand understand all warnings onthis machine. If at anytime the Warning stickers become loose, unreadable or

dislodged, contact Nautilus® CustomerServicefor replacement stickers.

• Children must not belet on or nearto this machine. Moving parts and otherfeatures ofthe machinecan be dangerous

to children.

• Consultaphysician beforeyou start an exercise program. Stopexercising ifyou feel pain or tightness in your chest, become

short of breath, or feel faint. Contact your doctor before you usethe machine again. Usethe values calculated or measured

by the machine's computer for reference purposes only.

• Examinethis machinefor loose parts or signs ofwear. Monitor the Seat, Pedals,and CrankArms closely. Donot use iffound

in this condition. Contact Nautilus®CustomerService for repair information.

• Maximum userweight limit: 300Ibs. (136kgs). Donot useif you are overthis weight.

• Thismachine is for home use only.

• Do notwear loose clothing or jewelry. This machine contains moving parts.

• Set upand operate this machine on a solid, level, horizontal surface.

• Stabilizethe Pedalsbefore you step on them. Use caution when you step off the machine.

• Disconnect all power before servicing this machine.

• Keepatleast19.7"(0.5m)oneachsideofthe machine clear. This istherecommended safe distance for access and passage

around and emergency dismounts from the machine. Keepthird parties outof this space when machine is in use.

• Do not over exertyourself during exercise. Operatethe machine in the manner described inthis manual.

• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not

hit the user.

Safety Warning Labels and Serial Number

Type Description

A WARNING

• Keep children away.

• Prior to use, read and understand the Owners Manual.

• Injury or death is possible if Caution is not usedwhile usingthis machine.

• The maximumuserweight for this machine is 300Ibs(136kg).

• Replace any "Caution", "Warning" or "Danger" label that is illegible, damaged,or

removed.

• This machine isfor home use only.

AVERTISSEMENT

• Gardezlesenfants et les animaux de compagnie 61oign6sdecette machine en

tout temps.

• Lisezet familiarisez-vous avec le Manuel du propri6taire et avec tousles

avertissements avant d'utiliser cette machine.

• Soyezprudent Iorsque vous utilisez cet 6quipement pour ne pasvous infliger de

graves blessures.

• Cettemachine supporte un poids maximalde 300Ibs (136kg).

• Remplaceztoute 6tiquette d'avertissement endommag6e,illisible oumanquante.

• Cettemachine est _ usage domestique uniquement.

B Serial Number Record serial numberon Contacts page at end ofthis manual.

Specifications

O-3001b_136kgs 1

Power Requirements

Regulatory Approvals

OperationalVoltage 9VDC

Operating Current 500mA

ACPower Adapter: ULlisted, CSAcertified (or equivalent), Rated 120V60Hz

Input, 9VDC,500mAOutput. Class2 or LPS.

Features

A Console G Pedals

B Handlebars,Upright H Leveler

C FullyShrouded Flywheel I Adjustable Seat

D TransportWheels J Contact Heart Rate (CHR)Sensors

E Stabilizers K Handlebars,Side

F ACAdapter Plug L Magazine Rack

Console

The Consoleprovides important information aboutyour workout and lets you control the resistance levelswhile youexercise. The

Console has a grid display with touch control buttons to navigate youthrough the exercise programs.

Console Features

A Backlit LCDDisplay

B Telemetric Heart Rate -- Readsheart rate signal from heart rate chest strap

C STOP/RESETbutton -- Pausesan active workout, and if pushed again,ends the workout

D Increase button (-) -- Increases avalue (age,time, distance, calories, or workout resistance level)

E Decrease button (v) -- Decreases a value (age,time, distance, calories, orworkout resistance level)

F QUICKSTARTbutton -- Begins a Quick Start workout.

6 LOCK/SCANbutton -- Cyclesthrough your workout variables for 6 seconds each. PushSTOP/RESETfor manual

control ofthe scan function. PushSTOP/RESETagain to exit the scan mode

H START/ENTERbutton -- Starts a Programworkout, confirms information, or resumesa pausedworkout

I Schwinn AdvantageTM -- Starts user data edit mode

LCD

The multi-function, backlit LCDshows your workout measurements(during the workout), results, user setup data and console

diagnostics.

LCD Display Data

AA1

' _ AA2

AA7 AA3

AA6"

AA5

AA1 ProgramDisplay AA5 PULSE

AA2 TIME/ INTERVAL AA6 DISTANCE

AA3 WATT/ LEVEL AA7 SPEED/ RPM KM

AA4 CALORIES

Note: Tochangethe measurement units to English Imperial or metric, refer to the "Console Setup Mode"

section in this manual.

Program Display

The ProgramDisplay shows the name ofthe program selection and the dot-matrix area shows the course profile for the program.

Each column in the profile shows one interval (1/40ofthe total program time). The higher the column,the higher the resistance

level and/or speedfor that interval. Theflashing column shows your current interval.

Time/Interval

TheTIME/INTERVALdisplay field shows the time count in the workout. If no preset time is set upfor the current workout program,

the display value starts at zero and countsforward until the end ofthe workout. Maximum time is 99:59.

If the workout has a preset time, the display starts at the preset value and counts down to zero. Thedisplay showsthe total time

count for the workout, then the time count for the current interval.

Watt/Level

TheWATT/LEVELdisplay field shows the power that you are producing atthe current resistance level (1 horsepower = 746watts)

for 6 seconds, the resistance level(1-16) for 6 seconds.

Calories

The CALORIESdisplay field shows the estimated calories that you have burned during the exercise. If no calorie goal isset up

for the current workout program,the display value starts at zero and counts forward until the end of the workout. If the workout

has a calorie goal,the display starts at the preset value and counts down to zero.

Pulse

The Pulsedisplay field shows the heart rate in beats per minute (BPM)from the heart rate monitor (HRM).

_, onsult a physician before you start an exercise program. Stopexercising if you feel pain or tightness in your chest,

become short of breath, or feel faint. Contact your doctor beforeyou usethe machine again. Usethe values calculated or

measured bythe machine'scomputer for reference purposes only.

Distance

The DISTANCEdisplay field shows the distance count (miles or km) in the workout. If no distance goal is set up for the current

workout program,the display value starts at zero and counts forward until the end of the workout. If the workout has a distance

goal, the display starts at the preset value and counts downto zero.

Speed/RPM KM

The SPEED/RPMKM display field shows the machine speed in kilometers per hour (kin/h) or miles per hour (mph)for 6 seconds,

then the revolutions per minute (RPM)for 6 seconds.

Remote Heart Rate Monitor

Monitoring your Heart Rateis one ofthe best procedures to control

the intensity of your exercise.

Contact Heart Rate (CHR)sensors are installed to sendyour heart

rate signals to the Console.The Consolecan also read telemetry

HRsignals from a Heart RateChestStrapTransmitter. The Console

shows your Heart Rate in Beats Per Minute (BPM).

_, If you have a pacemaker or other implanted electronic

device, consult your doctor before using awireless chest

strap or othertelemetric heart rate monitor.

Contact Heart Rate Sensors

Contact Heart Rate(CHR)sensors sendyour heart rate signals to the Console.TheCHRsensors arethe stainless steel parts ofthe

Handlebars.Touse, putyour hands comfortably around the sensors. Be surethat your handstouch boththe top andthe bottom of

the sensors. Holdfirm, but nottoo tight or loose. Both handsmust make contact with the sensorsfor the Consoleto detect a pulse.

After the Consoledetects four stable pulse signals,your initial pulse ratewill be shown.

Oncethe Consolehasyour initial heart rate, do not move or shift your handsfor 10to 15seconds. The Consolewill now validate the

heart rate. Many factors influence the ability ofthe sensorsto detect your heart rate signal:

• Movement ofthe upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere with

pulse detection. Slight hand movementwhile in contact with the sensors can also produce interference.

• Calluses andhand lotion may act asan insulating layerto reduce the signal strength.

• SomeElectrocardiogram (EK6) signals generated byindividuals are notstrong enough to be detected bythe sensors.

CHRdetection may be limited to walking or slow jogging due to the extreme muscle artifacts and hand motion generated bya

comfortable running style. If your heart rate signal ever seemserratic after validation, wipe off your hands and the sensors

and try again.

Heart Rate Calculations

Yourmaximum heart rate usually decreases from 220Beats PerMinute (BPM) in childhood to approximately 160BPM by age 60.

This fall in heart rate is usually linear, decreasing byapproximately one BPMfor each year. There is no indication that training

influences the decrease in maximumheart rate. Individuals of the same age could have different maximumheart rates. It is more

accurate to find this value by getting a stress test than by using an age related formula.

Yourat rest heart rate is influenced byendurance training. Thetypical adult has an at rest heart rate of approximately 72 BPM,

where as highly trained runners may havereadings of40 BPM or lower.

The Heart Ratetable is an estimate ofwhat Heart Rate Zone(HRZ)is effective to burnfat and better your cardiovascular system.

Physicalconditions vary,therefore your individual HRZcould be several beats higher or lower than what is shown.

The mostefficient procedure to burn fat during exercise isto start at aslow pace and gradually increase your intensity until your

heart rate reaches between 60- 85%of your maximumheart rate. Continueat that pace, keeping your heart rate in that target zone

for over 20minutes. Thelonger you maintain your target heart rate, the morefat your bodywill burn.

The graph is a brief guideline, describing the generally suggestedtarget heart rates based on age. As noted above, your optimal

target rate may be higher or lower. Consultyour physician for your individual target heart rate zone.

Note: Aswith all exercises andfitness regimens, always use your best judgment when you increase your

exercise time or intensity.

Fat Burning Target Heart Rate

Heart Rate

BPM (beats

per minute)

250

200 196 191 _

/_o

0 181 _

• 4_o 17!

167 _-_ • • A 166 161

"_ _ 1 58 ! 54 = 150 _ • _ • 1_56 151

146

150 -_ 145 141

- 137 133 128

_ 126

[

118

115 112 109 1-

100 .... _ " 103 ...._^ -

uu 97 94 91 88

20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69 70+

Age

Maximum Heart Rate

Target Heart Rate Zone (keep

within this range for optimumfat

burning)

Operations

What to Wear

Wear rubber-soled athletic shoes. Youwill needthe appropriate clothes for exercise that allow youto movefreely.

How Often Should You Exercise

Consulta physician before you start an exercise program. Stopexercising if you feel pain or tightness in your chest,

become short of feel faint. Contact doctor before the machine Usethe values calculated

breath, or

your you

use

again.

measured bythe machine'scomputer for reference purposes only.

• 3times aweek for 30 minutes each day.

• Schedule workouts in advance. Tryto work out evenwhen you do notwant to.

Seat Adjustment

Correct seat placement encourages exercise efficiency and comfort, while reducing the risk of injury.

1. With a Pedal in the forward position, center the ball of your foot over the center of it. Your leg should

be bent slightly at the knee.

2. If your leg is too straight or your foot cannot touch the Pedal, move the seat down on the upright bike

or forward on the recumbent bike. If your leg is bent too much, move the seat up on the upright bike

or rearward on the recumbent bike.

Step off the bike before you adjust the seat.

Upright bike--pull the adjustment knob onthe seat tube. Adjust the seat to the desired height. Releasethe

adjustment knobto engage the locking pin. Be surethat the pin is fully engaged. Tomovethe upright seat closer

to, or away from the console, loosenthe knob. Slidethe seat forward or rearward to the desired position and

tighten the knob.

• Recumbent bike--pull the adjustment knob onthe seat bracket. Slide the seat to the desired position. The

adjustment knobwill "pop" intothe next hole.Turnthe knobto fully tighten and make surethe seat isstable.

Note: Different models can havethe knob onthe top or the side ofthe seat bracket.

Foot Position / Pedal Strap Adjustment

Footpedalswith straps provide secure footing to the exercise bike.

1. Put the ball of each foot on the Pedals.

2. Rotate the Pedals until one can be reached.

3. Fasten the strap over the shoe.

4. Repeat for the other foot.

Be suretoes and knees point directly forward to ensure maximum Pedal efficiency. Pedal

straps can be left in position for subsequent workouts.

Adjust Console

Toadjust the console tilt position:

1. Loosen the knob below the console.

2. Carefully move the console tilt to one of the available positions.

3. Tighten the knob.

Power-Up Mode

The Consolewill enter P0WER-UPmodeif it is plugged into a power source, any button is pushed, or if it receives an indication

from the RPM sensor as a result of pedaling the machine.

Auto Shut-Off (Sleep Mode)

If the Console doesnot receive any input in approximately 5 minutes, itwill automatically shut off. The LCDdisplay is off while in

Sleep Mode.

Note: The Consoledoes not have an 0n/0ff switch.

Quick Start / Manual Program

The Quick Start/Manual program lets you start aworkout without entering any information.

1. Step on the machine.

2. Push the QUICK START button to start the QUICK START/MANUAL program.

3. Push the Increase or Decrease buttons to change the resistance level. The default Quick Start resistance

level is 3. The time will count up from 00:00.

4. Push STOP when done with your workout.

Workout Program Selection

Togoto the Program Menu, you mustfirst makea User selection inthe User menu. Usethe Increase/Decrease buttonsto look at

the Usermenu options. Youcan usethe GuestUser option to goto the ProgramMenu without user setup data. If you want to save

your workout data, refer to the User Setup procedure in this manual.

User Setup -- Schwinn Advantage TM

The Schwinn® 40Series console lets youstore and use2 User profiles (U1and U2)in addition to a GuestUser with no setup data

stored. The Schwinn AdvantageTM feature automatically records your workout results in your User profile, and lets youtrack

your fitness progress and edit data.

The User profile stores the following information:

1. Name -- up to 12 characters

2. Total number of workouts

3. Total hours

4. Total distance

5. Total calories

6. Starting weight

7. Target weight

8. Current weight

9. Weight change (Starting Weight - Current Weight)

10. Height

11. Age

12. Custom Workout (program profile, time)

Select / Add User

1. From the POWER UP MODE screen, push the Increase/Decrease buttons to move through the User

menu options.

Note: ADD USERand GUESTUSERare the only options if no Usersare set up. If all User profiles are in

use, the ADD USERoption will not be available.

2. Push START/ENTER to make your selection. If you select GUEST USER or a User (U1 or U2), you can go

to the Program Menu to start a workout.

Note: Pushthe STOP/RESETbutton to go back to the previous screen or character.

3. In the ADD USER option, push START/ENTER 2 times and the console display will show the Name prompt.

Edit

Note: Usethe Increase/Decrease buttonsto move through the alphabet (or numbers). Torecord each

letter, pushthe START/ENTERbutton. PushSTART/ENTERfor a space.

If your name does not fill the spaces on the Name screen, tap the START/ENTER button to add spaces

until the next data screen appears.

4. Enter your user data on each screen -- Weight, Height, Age, Custom Workout.

5. To set up the Custom Workout, push START/ENTER 2 times. The Program Display will have a default

resistance level of 1 for all columns. Adjust the resistance level of the active column (flashing) with the

Increase/Decrease buttons. Push START/ENTER to record the resistance level. The completed columns

move off the screen to the left, and the next column is active. Continue until all 40 columns are set.

The screen shows the message "USER ADDED" and you go to the Program Menu.

User Data

From the POWER UP MODE screen press the Schwinn Advantage TM button (Schwinn® Quality Seal).

Push the Increase/Decrease buttons to move to a User.

Push START/ENTER make the User selection.

4. The Edit options appear on the display: View, Edit, Delete. Push START/ENTER to make your selection.

VIEW--The display shows these screens: TotalWorkouts, Total Hours,Total Miles (km),TotalCalories,Starting Weight, Target

Weight, Current Weight, Weight Change.

EDIT-- Youcanedit the values for: CurrentWeight, TargetWeight, Current Height,EnterAge, CustomWorkout. PushSTART/ENTER

to set each value after you makethe change. When the changes are complete, tap the START/ENTERor STOP/RESETbutton

until you are out of the Edit option.

DELETE--To delete the User data, pushSTART/ENTER.Tocancel the deletion, pushSTOP/RESET.

Custom Workout

After your CustomWorkout is set up in your User Profile, you can start the program from the CustomWorkout option in the Program

Menu. Theconsole display will prompt you to set the Timefor the workout (default is30:00).Usethe Increase/Decrease buttonsto

adjust the Timevalue, and pushSTART/ENTERto set the time.

Profile Programs

These programs automate different resistances and workout levels.

Course1

mm m

Course 2

m m m

Course3

mm mm

Circuit 1 Circuit 2

m m m

mm mm mmmm

Circuit 3

Pursuit 1

Pursuit 2

mm mm mm

mm mm mmmm mm

m m

Tostart a Profile Program:

1. Step on the machine.

2. Use the Increase or Decrease buttons to select a user (guest or custom) and push START/ENTER.

3. Use the Increase or Decrease buttons to select one of the above programs. Push START/ENTER.

4. Use the Increase and Decrease buttons to answer the setup questions. Push START/ENTER to record

your answers.

Note: The default value for TIME is 30:00.The default start value for LEVELis8.

5. Push the START/ENTER button to start the profile workout.

Changing Resistance Levels

Pushthe Increase or Decrease buttons to change the resistance level at anytime in aworkout program.

Fitness Test

The FitnessTestmeasuresthe improvements ofyour physicalfitness level. Thetest compares your power output (inWatts) to your

heart rate. As you become morefit youwill produce more power (Watts) at a givenheart rate.

When the test starts, the power (Watts) slowly increases. This meansyou will work harder, and as a result, your heart rate

increases. TheWatts continue to increase automatically until your heart rate reaches the "Test Zone." This zone is individually

computed to be near 75percent ofyour maximumheart rate. When you reachthe TestZoneyour machine holds theWatts steady

for 3 minutes. This lets you reach a stable condition (where your heart rate becomes steady). At the end ofthe 3 minutes, the

Console measuresyour heart rate and the power output (Watts). These numbers,along with information about your age and

weight, are computed to produce a "Fitness Score".

Note: FitnessTestscores should only be compared to your previous scores and notother users.

Overtime, youwill outputmore Watts of power at a certain Heart Rate.Compareyour FitnessScores to seeyour improvement.

Heart Rate Control (HRC) Program

The Heart RateControl (HRC)program lets you set a heart rate goalfor yourworkout. Theprogram monitorsyour heart rate in beats

per minute (BPM)from the Contact Heart Rate(CHR)sensors on the machine or from a Heart RateMonitor (HRM)chest strap.

Note: The console must be able to readthe heart rate information from the CHRsensors or HRMfor the HRC

programto work correctly.

If you goto the HRCprogram from your User profile, the Target Heart Rateprogram uses your age and other usersetup information

to set the Heart RateZonevalues for your workout. If you are a GuestUser,you mustenter your age and weight. The console

display then gives promptsfor you to set up your workout:

1. Set the workout level: FIT (beginner) or GETTING FIT (advanced).

2. Set the percentage of maximum heart rate: 60-70%, 70-80%, 80-90%.

_, Consulta physician before you start to exercise inthe 80-90% heart rate zone.

3. Set the Time for the workout. (The default value is 10:00.)

For moredetailed information about fitness zones,please refer to the fitness information on ourwebsite:

www.sc hwinnfitness.com

Distance Goal

The Distance Goal Program lets you set the total Distance and Pacer Speedfor yourworkout. If you are a Guest User,you must

enter yourweight. The console display then gives promptsfor youto set up your workout:

1. Enter the distance with the Increase/Decrease buttons (default is 20 mi/20 km). Push START/ENTER.

2. Enter the pacer speed with the Increase/Decrease buttons (default is 25 mph/25 km/h). Push

START/ENTER.

3. The exercise starts at level 1. To adjust the resistance, use the Increase/Decrease buttons.

4. The TIME display starts to count up from 00:00.

Results / Cool Down Mode

After aworkout the TIME display shows 00:00and the console shows the Workout Results.Youcan start your workout cool down.

The LCDdisplay shows each workout data value for 4seconds: TIME, MILES(KM), CALORIES,CAL/HR,AVG/MPH(KMH),AVG

PWR,AV6/HR, MAX HR.The PULSEdisplay shows the current BPMvalue. The LEVELdisplay starts at 1.

If there is no RPM or PULSEsignal, the console automatically goes into Sleep Mode.

Pausing or Stopping

1. Push the STOP/RESET button to pause your workout. WORKOUT PAUSED mode shows on the Display.

2. Push START/ENTER to continue your workout, or push the STOP/RESET button to stop the workout.

Console Setup Mode

The ConsoleSetup Mode lets you set the units of measure to either Englishor Metric, adjust the contrast of the display,and

stop or start the motivational messages. Motivational messagesshow onthe screen to increase your enthusiasm and to give

positive feedback while you are working out.

1. Hold down the LOCK/SCAN button and Increase button together for 3 seconds while in the POWER-UP

MODE to go into the CONSOLE SETUP MODE.

2. Push the Increase/Decrease buttons to change between ELLIPTICAL and BIKE.

3. Push START/ENTER to set.

4. Push the Increase/Decrease buttons to change between ENGLISH and METRIC units.

5. Push START/ENTER to set.

6. Push Increase/Decrease to adjust the screen contrast (BACKLIGHTS, "5" = maximum intensity, "1" =

minimum).

7. Push START/ENTER to set.

8. The Console shows TOTAL HOURS.

9. Push START/ENTER.

10. Push Increase/Decrease to turn motivational messages off or on.

11. Push START/ENTER to set.

12. Push Increase/Decrease to set which software version to use ("SW30 V1.0" = x20 machine, "SW40

V1.0" = x40 machine, or "NLS 514" = 514 machine).

13. Push START/ENTER to set.

Note: PushSTOP/RESETfor previous screen.

Maintenance

Equipment must be regularly examined for damage and repairs. The owner is responsible to makesure that regular

maintenance is done. Worn or damaged components must be replaced immediately or the equipment removed from

service until the repair is made. 0nly manufacturer supplied components can be usedto maintain and repair the

equipment.

This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth

harm. This Notice is in accordance with California's 65. If would like

defects, or

reproductive provided Proposition you

additional information, please refer to our Web site at www.nautilus.com/prop65

_To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before

cleaning, maintaining or repairing this machine.

I i

Daily Monthly

I t

Weekly

I i

Before each use, examinethe exercise machine for loose, broken, damaged,or worn parts. Do not useif

found in this condition. Repairor replace all parts atthe first sign ofwear or damage. After each workout,

usea dampcloth to wipe your machine and Consolefree of sweat.

Note: Avoid excessive moisture on the Console.

I i

Checkfor smooth seat slider, handlebar slider, and console tilt operation. Cleanthe machine to remove

anydust, dirt, or grimefrom the surfaces. If needed, sparingly apply a thin coating of silicone lubeto

ease operation.

Note: Donot use petroleum based products.

I i

Checkpedals and crank arms and tighten as necessary. Make sure all bolts and screws are tight.

Tighten as necessary.

Level Your Bike

Levelers are found on each side ofthe RearStabilizer.Turnthe knobto adjust the stabilizer foot. Make sure the bike is level and

stable before you exercise.

Moving Your Bike

Upright

Tomovethe upright bike, carefully pull the Handlebars

toward you while pushingthe front of the bike downward.

Pushthe biketo the desired location.

Recumbent

Tomovethe recumbent bike, carefully lift the rear end ofthe

bike and slowly pushthe biketo the desired location.

NOTICE:

Be careful when you move the bike. All abrupt motions can affect the computer operation.

Troubleshooting

Problem Check Solution

Nodisplay/partial diplay/unit will notturn

Checkelectrical (wall) outlet

Make sure unit is plugged into a

functioning wall outlet.

Checkconnection at front (recumbent) or Connection should be secure and

rear (upright) of unit undamaged. Replace adapter or

connection atunit if either are damaged.

Checkdata cable integrity All wires in cable should be intact. If any

arevisibly crimped or cut, replace cable.

Check data cable

connections/orientation

Insure cable is connected securely

and oriented properly. Small latch on

connector should line up and snap into

place.

Checkconsole display for damage Checkfor visual signthat console display

is cracked or otherwise damaged.

Replace Consoleif damaged.

ConsoleDisplay If Console only has partial display and

all connections are fine, replace the

Console.

If the above steps do not resolve the

problem, contact Customer Carefor

further assistance.

Unit operates but Contact HRnot

displayed

HRcable connection at Console

HRcable box connection (recumbent

only)

Insure cable is connected securely to

Console.

Insure cables from handlebarsand cable

to Consoleare secure and undamaged.

Somemodels mayrequire the seat back

be raisedto access cable box.

Sensor grip

Insure hands are centered on HR

sensors. Hands must be kept still with

relatively equal pressure applied to each

side.

Dry or calloused hands Sensors may have difficulty with dried

out or calloused hands. A conductive

electrode cream such as"Signa Cr_me"

or "Buh-Bump" can help make better

conduct. These are available on the

web or at medical or some larger fitness

stores.

Unit operates butTelemetric (ifequipped)

HRnot displayed

Handlebars

ChestStrap

Iftests revealnoother issues, Handlebars

should be replaced.

Strap should be"Polar"compatible. Make

sure strap is directly against skin and

contact area is moist.

Interference

Try moving unit away from sources of

interference (TV,Microwave, etc). If

interference is eliminated and HRstill

does notfunction, replace strap and

Console.

Consoledisplays "E2"error code

Nospeed/RPM reading, Consoledisplays

"E3"error code

Consoleshuts off (enters sleep mode)

while in use

Checkdata cable integrity

Check data cable

connections/orientation

ConsoleElectronics

Checkdata cable integrity

Check data cable

connections/orientation

Checkmagnet position (requires shroud

removal)

CheckRPM Sensor (requires shroud

removal)

Checkdata cable integrity

Check data cable

connections/orientation

ResetMachine (if equipped with reset

button)

Checkmagnet position (Technician only-

requires shroud removal)

All wires in cable should be intact. If any

are cut or crimped, replace cable.

Insure cable is connected securely

and oriented properly. Small latch on

connector should line up and snap into

place.

If tests reveal no other issues, Console

should be replaced.

All wires in cable should be intact. If any

are cut or crimped, replace cable.

Insure cable is connected securely

and oriented properly. Small latch on

connector should line up and snap into

place.

Magnet should be in place on flywheel.

If no magnet is present, replace the

flywheel orthe entire base unit (if unable

to replace flywheel).

RPMsensor should be aligned with

magnet and connected to data cable.

Realignsensor if necessary. Replace if

there is anydamageto the sensor orthe

connecting wire.

All wires inthe cable should be intact. If

anyare cut or crimped, replace cable.

Insure cable is connected securely

and oriented properly. Small latch on

connector should line up and snap into

place.

Unplugunit from electrical outlet for 3

minutes. Reconnect to outlet. After the

Consolepowers up, press "reset".

Magnet should be in place on flywheel.

If no magnet ispresent, replaceflywheel

or entire base unit.

CheckRPMSensor Contact Customer Care for further

assistance.

Fan(if equipped) will notturn on or will

notturn off

Unit rocks/does notsit level

Checkdata cable integrity

All wires in cable should be intact. If any

are cut or crimped, replace cable.

Check data cable

connections/orientation

Insure cable is connected securely

and oriented properly. Small latch on

connector should line up and snap into

place.

ResetMachine (if equipped with reset

button)

Unplugunit from electrical outlet for

3 minutes. Reconnect to outlet. After

Consolepowers up, press "reset".

Checkleveler adjustment Levelingfeet may be turned in or out to

level bike.

Checksurface under unit

Adjustment may not be able to

compensate for extremely uneven

surfaces. Move biketo level area.

La page charge ...

Schwinn 240 Le manuel du propriétaire

Marque: Schwinn

Modèle: 240

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Schwinn 240 Owner's manual

Schwinn 240 Le manuel du propriétaire

Ce manuel convient également à

Schwinn 240 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents