LG LMAN125HV Le manuel du propriétaire

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating

your set and retain it for future reference.

TYPE : Standard / Standard Libero

Artcool Mirror

Ceiling Cassette

http://www.lghvac.com

www.lg.com

P/NO : MFL39817411

ENGLISH FRANÇAIS ESPAÑOL

2 Multi Air Conditioner

Multi-Type Air Conditioner Owner’s Manual

TABLE OF CONTENTS

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

n Staple your receipt to this page in the event you need

it to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use

and maintain your air conditioner properly. Just a little

preventive care on your part can save you a great deal

of time and money over the life of your air conditioner.

You'll find many answers to common problems in the

chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips first, you may not need to call

for service at all.

PRECAUTION

• Contact the authorized service technician for

repair or maintenance of this unit.

• Contact the installer for installation of this unit.

• The air conditioner is not intended for use by

young children or invalids without supervision.

• Young children should be supervised to ensure

that they do not play with the air conditioner.

• When the power cord is to be replaced,

replacement work shall be performed by

authorized personnel only using only genuine

replacement parts.

A. Safety Precautions ..........................3

B. Electrical Safety...............................6

Temporary Use of an Adapter...........6

Symbols used in this Manual ............6

C. Product Introduction.......................7

Indoor Units.......................................7

Outdoor Unit......................................7

D. Operating Instructions....................8

How to insert the Batteries ................8

Wireless Remote Controller

Maintenance......................................8

Operation Indication Lamps ..............9

Operating Method .............................9

Wireless Remote Controller ............10

Wired Remote Controller (Optional)

...12

Operation Mode ..............................13

Healthy Dehumidification Operation14

Air Circulation Operation .................14

Auto Operation ................................14

PLASMA Purification Operation

(Optional) ........................................14

Jet Cool/Heat Operation..................15

Energy-Saving Cooling Mode

(Optional) ........................................15

Display Luminosity (Optional) .........15

Sleep Mode Operation (Optional) ...15

Auto Clean(Optional).......................16

Setting the Current Time .................16

Timer Setting...................................16

To cancel the Timer Setting ............16

Forced operation .............................17

Auto Restart Function .....................17

Horizontal Vane Control (Up/Down

Airflow Direction Control) ................18

Vertical Louver Control (Left/Right Airflow

Direction Control) (Optional)................

18

E. Maintenance and Service..............19

Standard/Standard Libero/Artcool

Mirror Type......................................19

Ceiling Cassette Type .....................20

Operation Tips!................................21

Owner's Manual 3

Safety Precautions

ENGLISH

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by

the following indications.

n Meanings of symbols used in this manual are as shown below.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Be sure not to do.

Be sure to follow the instruction.

Always use a power plug and socket with

a ground terminal.

• There is a risk of electric shock.

Do not use a defective or underrated

circuit breaker. Use the correctly rated

breaker and fuse.

• There is risk of fire or electric shock .

Do not use a multi consent. Always use

this appliance on a dedicated cicuit and

breaker.

• Otherwise it can cause electric shock or fire.

For electrical work, contact the dealer, seller,

a qualified electrician, or an Authorized

Service Center. Do not disassemble or repair

the product by yourself.

• There is risk of fire or electric shock.

Always ground the product as per the

wiring diagram. Do not connect the

ground wire to gas or water pipes

lightening rod or telephone ground wire.

• There is risk of fire or electric shock.

Install the panel and the cover of control

box securely.

• There is risk of fire or electric shock due to

dust , water etc.

Use the correctly rated breaker or fuse.

• There is risk of fire or electric shock.

Do not modify or extend the power cable.

If the power cable or cord has scrathes or

skin peeled off or deteriorated then it

must be replaced.

• There is risk of fire or electric shock.

For installation, removal or reinstall ,

always contact the dealer or an

Authorized Service Center.

• There is risk of fire, electric shock, explosion,

or injury.

Do not install the product on a defective

installation stand. Be sure that the

installation area does not deteriorate with

age.

• It may cause product to fall.

Never install the outdoor unit on a

moving base or a place from where it

can fall down.

• The falling outdoor unit can cause damage or

injury or even death of a person.

When the product is soaked (flooded or

submerged) in water , contact an

Authorized Service Center for repair

before using it again.

• There is risk of fire or eletric shock.

In outdoor unit the step-up capacitor

supplies high voltage electricity to the

electrical components. Be sure to

discharge the capacitor completely

before conducting the repair work.

• An charged capacitor can cause electrical

shock.

When installing the unit, use the

installation kit provided with the product.

• Otherwise the unit may fall and cause severe

injury.

Be sure to use only those parts which

are listed in the svc parts list. Never

attempt to modify the equipment.

•

The use of inappropriate parts can cause an

electrical shock, excessive heat generation or fire.

4 Multi Air Conditioner

Safety Precautions

Indoor/outdoor wiring connections must

be secured tightly and the cable should

be routed properly so that there is no

force pulling the cable from the

connection terminals.

• Improper or loose connections can cause

heat generation or fire.

Safely dispose off the packing materials.

Like screws, nails, batteries, broken

things etc after installation or svc and

then tear away and thraw away the plastic

packaging bags.

• Children may play with them and cause

injury.

Make sure to check that the power cable

plug is not dirty, loose or broken and

then only insert the plug completely.

• Dirty, loose or broken power plug can cause

electric shock or fire.

Be sure to check the refrigerant to the

used. Please read the label on the product.

• Incorrect refrigerant used can prevent the

normal operation of the unit.

Don't use a power cord, a plug or a loose

socket which is damaged.

• Otherwise it may cause a fire or electrical

shock.

Do not touch , operate, or repair the

product with wet hands. Hold the plug by

hand when taking out

• There is risk of electric shock or fire.

Do not place a heater or other heating

appliances near the power cable.

• There is risk of fire and electric shock.

Do not allow water to run into electric

parts. Install the unit away from water

sources.

• There is risk of fire, failure of the product, or

electric shock.

Do not store or use or even allow

flammable gas or combustibles near the

product.

• There is risk of fire.

Do not use the product in a tightly closed

space for a long time. Perform ventilation

regularly.

• Oxygen deficiency could occur and hence

harm your health.

Do not open the front grille of the product

during operation. (Do not touch the

electrostatic filter, if the unit is so equipped.)

• There is risk of physical injury, electric shock,

or product failure.

If strange sounds, smell or smoke comes

from product.Immediately turn the breaker

off or disconnect the power supply cable.

• There is risk of electric shock or fire.

Ventilate the product room from time to

time when operating it together with a

stove, or heating element etc.

• Oxygen deficiency can occur and hence harm

your health.

Turn the main power off and unplug the

unit when cleaning or repairing the

product.

• There is risk of electric shock.

When the product is not to be used for a

long time, disconnect the power supply

plug or turn off the breaker.

• There is risk of product damage or failure, or

unintended operation.

Take care to ensure that nobody

especially kids could step on or fall onto

the outdoor unit.

• This could result in personal injury and

product damage.

Take care to ensure that power cable

could not be pulled out or damaged

during operation.

• There is risk of fire or electric shock.

Do not place ANYTHING on the power

cable.

• There is risk of fire or electric shock.

Do not plug or unplug the power supply plug to turn the unit

ON/OFF .

• There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window

for ventilation before turn the product on.

• Do not use the telephone or turn switches on or off. There is risk of

explosion or fire.

Two or more people must lift and

transport the product.

• Avoid personal injury.

Do not install the product where it will be

exposed to sea wind (salt spray) directly.

• It may cause corrosion on the product.

Install the drain hose to ensure that the

condensed water is drained away properly.

• A bad connection may cause water leakage.

Keep level even when installing the

product.

• To avoid vibration or noise.

Do not install the product where the noise

or hot air from the outdoor unit could

damage or disturb the neighborhoods.

• It may cause a problem for your neighbors

and hence dispute.

Always check for gas (refrigerant)

leakage after installation or repair of

product.

• Low refrigerant levels may cause failure of

product.

Owner's Manual 5

Safety Precautions

ENGLISH

Do not use the product for special purposes,

such as preserving foods, works of art, etc. It

is a consumer air conditioner, not a precision

refrigeration system.

• There is risk of damage or loss of property.

Do not block the inlet or outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do not use

harsh detergents, solvents or splashing

water etc .

• There is risk of fire, electric shock, or damage

to the plastic parts of the product.

Do not touch the metal parts of the

product when removing the air filter.

• There is risk of personal injury.

Do not step on or put anyting on the

product. (outdoor units)

• There is risk of personal injury and failure of

product.

Always insert the filter securely after

cleaning. Clean the filter every two weeks

or more often if necessary.

• A dirty filter reduces the efficiency.

Do not insert hands or other objects

through the air inlet or outlet while the

product is operating.

• There are sharp and moving parts that could

cause personal injury.

Be cautious when unpacking and

installing the product.

• Sharp edges could cause injury.

If the refrigerant gas leaks during the

repair, do not touch the leakaing

refrigerant gas.

• The refrigernat gas can cause frostbite (cold

burn)

Do not tilt the unit when removing or

uninstalling it.

• The condensed water inside can spill .

Do not mix air or gas other than the

specified refrigerant used in the system .

• If air enters the refrigerant system, an

excessively high pressure results, causing

equipment damage or injury.

If the refrigerant gas leaks during the

installation, ventilate the area immediately.

• Otherwise it can be harmfull for your health.

Dismantling the unit, treatment of the

refrigerant oil and eventual parts should

be done in accordance with local and

national standards.

Replace the all batteries in the remote

control with new ones of the same type.

Do not mix old and new batteries or

different types of batteries.

• There is risk of fire or product failure.

Do not recharge or disassemble the

batteries. Do not dispose off batteries in

a fire.

• They may burn or explode.

If the liquid from the batteries gets onto

your skin or clothes, wash it well with

clean water. Do not use the remote if the

batteries have leaked.

• The chemicals in batteries could cause burns

or other health hazards.

If you eat the liquid from the batteries,

brush your teeth and see doctor. Do not

use the remote if the batteries have

leaked.

• The chemicals in batteries could cause burns

or other health hazards.

Do not let the air conditioner run for a

long time when the humidity is very high

and a door or a window is left open.

• Moisture may condense and wet or damage

furniture.

Do not expose your skin or kids or

plants to the cool or hot air draft.

• This could harm to your health.

Do not drink the water drained from the

product.

• It is not sanitary and could cause serious

health issues.

Use a firm stool or ladder when cleaning,

maintaining or repairing the product at

an height.

• Be careful and avoid personal injury.

6 Multi Air Conditioner

Electrical Safety

• This appliance must be properly grounded.

To minimize the risk of electric shock, you must alway plug into a grounded oulet.

• Do not cut or remove the grounding prong from the power plug.

• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance

unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the

house wiring.

• If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and

circuit checked by a qualified electrician.

We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections,

use only a genuine adapter, available from most local hardware stores. Ensure that the large slot in the

adapter is aligned with the large slot in the receptacle for a proper polarity connection.

To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground

terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.

• Never use the appliance with a broken adapter.

This symbol alerts you to the risk of electric shock.

This symbol alerts you to hazards that may cause harm to the

air conditioner.

This symbol indicates special notes.

NOTE

Symbols used in this Manual

Temporary Use of an Adapter

Electrical Safety

Owner's Manual 7

Here is a brief introduction of the indoor and outdoor units. Please see the information specific to your

indoor unit type.

h The figure can be changed according to model.

Product Introduction

Signal receiver

Front panel

Air discharge

ON/OFF button

Plasma filter

Air inlet

Air filter

Air inlet

Plasma filter (Optional)

[Standard Type] [Artcool Mirror Type]

Air filter

Air outlet

Front grille

ON/OFF button

Signal

receiver

Grille tab

Flap

(Horizontal blade)

Louvers

(Vertical blades)

[Ceiling Cassette Type][Standard Libero Type]

Cabinet

Air Discharge

Air Inlet

Signal receiver

Front Panel

Operation lamp

Signal Receiver

ON/OFF button

Air inlet

Plasma filter

Air filter

Front grille

Vertical louver

Allergy free filter

Air outlet

Horizontal vane

Triple filter

ENGLISH

Air outlet vents

Base plate

Connection pipe

Drain hose

Connecting wire

Control cover

Air intake vents

Outdoor Unit

Indoor Units

Product Introduction

Wireless Remote Controller Maintenance

1. Remove the battery cover by pulling it according to the arrow

direction.

2. Insert new batteries making sure that the (+) and (-) of battery are

installed correctly.(Battery Size = AAA)

3. Reattach the cover by sliding it back into position.

1. Always use/replace both batteries of same type.

2. If the system is not to be used for a long time, remove the

batteries to save their working life.

3. If the display screen of remote controller starts, fading replace

both of the batteries.

NOTE

1. Choose a suitable place where its safe & easy

to reach.

2. Fix the holder to wall etc with the supplied

screws firmly.

3. Slide the remote controller inside the holder.

1. Remote controller should never be exposed to

direct sunlight.

2. Signal transmitter & receiver should always be

clean for proper communication. Use a soft

cloth to clean them.

3. In case some other appliances also get

operated with remote control, change their

position or consult your serviceman.

NOTE

8 Multi Air Conditioner

Operating Instructions

How to insert the Batteries

Operating Instructions

Owner's Manual 9

Operating Instructions

1. The signal receiver is inside the unit.

2.

Aim the remote controller towards the unit to operate it.

There should not be any blockage in between.

Ceiling Cassette TypeStandard Libero Type

Standard Type

Artcool Mirror Type

Operating Method

ENGLISH

[Standard/Artcool Mirror Type]

On/Off : Lights up during the system operation, error code and auto restart setting.

Sleep mode : Lights up during sleep mode auto operation.

Plasma : The function illustrates its dynamic mode by using a multiple lighting system.

Timer : Lights up during timer operation.

Defrost mode : Lights up during defrost mode or *hot start operation.

Power Display : Indicates the setting temperature and operation mode.

*

Hot start operation: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out from unit.

* In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat

exchanger coils to maintain the efficiency.

[Standard Libero Type]

• Cooling : 'Cooling' lamp lights up during Cooling Operation

• Heating : 'Heating' lamp lights up during Heating Operation

• Plasma : 'Plasma' lamp lights up during Plasma Purification Operation

[ During Air Circulation Operation, 'Cooling' lamp lights up.

[

While Plasma Purification operates with Air Circulation Operation, ‘Cooling’ lamp and ‘Plasma’ lamp lights up at the same time.

[Ceiling Cassette Type]

On/Off : Lights up during the system operation.

Filter Sign : Lights up after 2400 hours from the time of first operating unit.

Timer : Lights up during Timer operation.

Defrost Mode : Lights up during Defrost Mode or Hot Start operation.(Heat pump model only)

Forced : To operate the unit when the remote control can't be used for any reason.

Operation mode Cooling, heating, Dehumidification Mode Jet Cool Auto clean

Shape of display Setting temperature

Operation Indication Lamps

10 Multi Air Conditioner

Operating Instructions

Wireless Remote Controller

Cooling Mode

Auto Operation

Dehumidification mode

Heating Mode

Fan Mode

•

Cooling Model( ), Heat Pump Model( )

Operation Mode

3

4

6

8

9

5

7

14

15

17

16

10

12

13

11

2

1

1. VANE ANGLE Button

Used to set each vane angle.

2. FUNCTION SETTING Button

Used to set or clear Auto Clean, Smart Clean, Electric

heater or Individual vane angle control.

3. ON/OFF Button

Used to turn on/off the unit.

4. JET COOL Button

Speed cooling operates super high fan speed.

5. LEFT/RIGHT AIRFLOW Button (OPTIONAL)

Used to set the desired left/right(horizontal) airflow

direction.

6. UP/DOWN AIRFLOW Button

Used to stop or start louver movement and set the

desired up/down airflow direction.

7. ON TIMER Button

Used to set the time of starting operation.

8. SLEEP TIMER Button

Used to set the time of sleeping operation.

9. SET / CLEAR Button

Used to set/clear the timer.

Used to set the current time(if it input for 3sec.)

10. PLASMA Button (OPTIONAL)

Used to start or stop the plasma-purification function.

11. ROOM TEMPERATURE SETTING Button

Used to select the room temperature.

12. OPERATION MODE SELECTION Button

Used to select the operation mode.

13. INDOOR FAN SPEED SELECTION Button

Used to select fan speed in four steps low, medium,

high and chaos.

14. ROOM TEMPERATURE CHECKING Button

Used to check the room temperature.

15. OFF TIMER Button

Used to set the time of stopping operation.

16. TIMER SETTING(Up/Down)/LIGHT Button

Used to set the timer.

Used to adjust the brightness.(if it is not time adjust

mode)

17. RESET Button

Used to reset the remote controller.

h Some functions may not be operated and displayed depending on the product type.

NOTE

Owner's Manual 11

Operating Instructions

ENGLISH

Wired Remote Controller (Optional)

h Display temperature can be different from actual room temperature if the remote controller is

installed at the place where sun-rays are falling directly or the place nearby heat source.

h

The actual product can be different from above contents depending upon model type.

NOTE

1

4

5

7

11

10

9

8

2

3

6

13

12

14

15

Please attach the inform label inside of the door.

Please choose proper language depend on your

country.

OPERATION INDICATION

SCREEN

SET TEMPERATURE BUTTON

FAN SPEED BUTTON

ON/OFF BUTTON

OPRATION MODE SELECTION

BUTTON

WIRELESS REMOTE

CONTROLLER RECEIVER

• Some products don't receive the

wireless signals.

AIR FLOW BUTTON

SUBFUNCTION BUTTON

FUNCTION SETTING BUTTON

VENTILATION

BUTTON(OPTIONAL)

RESERVATION

UP,DOWN,LEFT,RIGHT BUTTON

• To check the indoor temperature,

press button.

ROOM TEMPERATURE BUTTON

SETTING/CANCEL BUTTON

EXIT BUTTON

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

h Model : PQRCVSL0, PQRCVSL0QW

Cooling

Healthy

Dehumidification

Heating

(Heat pump model only)

Auto Operation

Air Circulation

To lower the temperature

To raise the temperature

Press the ON/OFF BUTTON to turn the unit on.

The unit will respond with a beep.

Open the door of the remote controller and press the operation mode button. Each time the button

is pressed, the operation mode is shifted in the direction of the arrow.

For cooling or heating operation set the desired indoor

temperature by pressing the ROOM TEMPERATURE SETTING

BUTTONS.

For cooling the temperature can be set within

18°C~30°C(64°F~86°F) and for heating the temperature range is

16°C~30°C(60°F~86°F).

Set the fan speed with the remote controller. You can select the fan speed by pressing the

INDOOR FAN SPEED SELECTOR BUTTON.

Each time the button is pressed, the fan speed mode is shifted.

1

2

3

4

Natural wind

o

For fresher feeling, press the INDOOR FAN SPEED SELECTOR BUTTON selector and set to CHAOS or Natural wind

mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed.

12 Multi Air Conditioner

Operating Instructions

Operation Mode

Owner's Manual 13

Operating Instructions

ENGLISH

Plasma filter is a technology developed by LG to get rid of microscopic

contaminants in the intake air by generating a plasma of high charge electrons.

This plasma kills and destroys the contaminants completely to provide clean and

hygienic air.

Plasma purification can be started by pressing the PLASMA BUTTON on the remote controller.

Repressing it will deactivate the operation.

This feature can be used in any operation mode and any fan speed can be used while

plasma filter is functioning.

NOTE

This operation circulates the air without cooling or heating. It can be

activated by pressing the OPERATION MODE SELECTION BUTTON.

Once the air circulation is activated you can select the air speed by

pressing the INDOOR FAN SPEED SELECTOR BUTTON.

: During this opertion, 'Cooling' lamp lights up.

(Standard Libero Type)

NOTE

During Healthy Dehumidification Operation

o If you select the dehumidification mode on the OPERATION MODE SELECTION

BUTTON, the product starts to run the dehumidification function. It automatically

sets the room temperature and airflow volume to the best condition for

dehumidification, based on the sensed current room temperature.

In this case, however, the setting temperature is not displayed on the remote

controller and you are not able to control the room temperature either.

o During the healthy dehumidification function, the airflow volume is automatically set

according to the optimization algorithm responding to the current room temperature status,

so that the room condition is kept healthy and comfortable even in the very humid season.

In this operation mode, the system is automatically operated by the

electronic controls.

- You can set the desired temperature between 64°F and 86°F for Auto

Operation mode.

This function properly operates when you use the remote controller

matching each model.

NOTE

PLASMA Purification Operation (Optional)

Auto Operation

Air Circulation Operation

Healthy Dehumidification Operation

14 Multi Air Conditioner

Jet cool function can be used to cool the room quickly in hot summer. When this

function is turned on, the air conditioner runs in cooling operation mode with super high

fan speed and 18°C(64°F) setting temperature for 30 minutes for fast and effective

cooling.

You can activate this operation by pressing the JET COOL BUTTON.

To change from jet cool mode to high fan speed cooling mode, press the JET COOL

BUTTON or INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE

SETTING BUTTON again.

Operating Instructions

Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by

setting body-adaptation time according to the change of time and temperature and adjusting desired

temperature automatically.

1. Press the FUNCTION button 2 time.

Energy-Saving Cooling symbol will blink.

2. Press the SET/CLEAR button the reserve or the Energy-Saving

Cooling function.

The Display Luminosity can be adjusted by using the remote control.

Open the cover of the remote controller, and press the LCD/LED LUMINOSITY button.

Display will be dark. Press the button again to set bright display.

• The sleep mode will operate indoor fan at super low speed in cooling mode and at low speed in heating

mode for pleasant sleep.

NOTE

Display Luminosity (Optional)

Energy-Saving Cooling Mode (Optional)

Jet Cool Operation

Owner's Manual 15

Operating Instructions

ENGLISH

o During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification

operation can be removed.

This function operate when the unit is turned off.

1. Press the FUNCTION SETTING button 1 time.

Auto Clean symbol will blink.

2. Press the SET/CLEAR button to reserve or cancel the Auto Clean function.

Auto Clean(Optional)

1. Press the SET / CLEAN button for 3 seconds.

2. Press TIME SETTING buttons until the desired

time is set. (If you press down the button for a long

time, it will change quickly in the units of 10 min.)

3. Press the SET / CLEAR button.

Check the indicator for A.M. and P.M.

Setting the Current Time

1. Press the TIMER button to turn timer on or off.

2. Press TIME SETTING buttons until the desired time

is set. (7 hours is the maximum setting)

3. Press the SET / CLEAR button.

Sleep Timer Setting

Timer Sleep

16 Multi Air Conditioner

Operating Instructions

1. Press the ON button to turn timer on or off.

2. Press TIME SETTING buttons until the desired time

is set.

3. Press the SET / CLEAR button.

On Timer Setting

Timer ON

To cancel the Timer Setting

• If you wish to cancel all timer setting, press the CLEAR ALL button.

• If you wish to cancel each timer setting, press the

each timer button to turn timer sleep or on or off as you want.

And then press the SET/CLEAR button aiming the remote

controller at the signal receptor.

(The timer lamp on the air conditioner and the display will go off.)

1. Press the OFF button to turn timer on or off.

2. Press TIME SETTING buttons until the desired time

is set.

3. Press the SET / CLEAR button.

Off Timer Setting

Timer OFF

Owner's Manual 17

Operating Instructions

Forced operation is used when the remote controller can't be used. The operation will be started if the ON/OFF

button is pressed. If you want to stop the operation, re-press the button.

ON/OFF

button

ON/OFF

button

Forced Operation

Button

[Ceiling Cassette Type][Standard Libero Type]

[Standard Type][Artcool Mirror Type]

ON/OFF

button

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature

and resets in 18 minutes.

During test operation, if remote controller signal is received, the unit operates as remote controller

sets.

If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1

'beep'. If you want to stop the operation, re-press the button.

This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6

seconds. The unit will beep twice and the lamp will blink 8 times.

To enable it, press the button again for 6 seconds. The unit will beep twice and the blue lamp will blink 4 times.

NOTE

This function is useful in the situation of power failure.

When power regains after a failure this feature restore the previous operating condition

and the air conditioner will run in the same settings.

Auto Restart Function

Heat pump Model

Room Temp. ≥ 24°C(75.2°F)

21°C(69.8°F) ≤ Room Temp. < 24°C(75.2°F)

Room Temp. < 21°C(69.8°F)

Operating mode

Cooling

Healthy Dehumidification

Heating

Indoor FAN Speed

High High High

Setting Temperature

22°C(71.6°F) 23°C(73.4°F) 24°C(75.2°F)

ENGLISH

Forced operation

18 Multi Air Conditioner

Operating Instructions

The up/down airflow (Vertical Airflow) can be adjusted by using the remote controller.

1. Press the ON/OFF button to start the unit.

2. Press UP/DOWN AIRFLOW button and the louvers will swing up and down.

Press the UP/DOWN AIRFLOW button again to set the vertical louver at the desired airflow direction.

• If you press the UP/DOWN AIRFLOW button, the horizontal airflow direction is changed automatically based

on the Auto Swing algorithm to distribute the air in the room evenly and at the same time to make the human

body feel more comfortable, as if enjoying a natural breeze.

• Always use the remote controller to adjust the up/down airflow direction. Manually moving the vertical airflow

direction louver by hand, could damage the air conditioner.

• When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

The left/right(horizontal) airflow can be adjusted by using the remote control.

1. Press the ON/OFF button to start the unit.

2. Press the LEFT/RIGHT AIRFLOW button and the louvers will swing left and right. Press

the Horizontal Airflow Direction Control Button again to set the horizontal louver at the

desired airflow direction.

h Up/Down and Left/Right Airflow function isn’t shown on display of remote controller.

Left/Right Airflow Direction Control (Optional)

Up/Down Airflow Direction Control (Optional)

Owner's Manual 19

ENGLISH

Operating Instructions

• There may be differences between wireless remote controller up/down/left/right buttons and the wind

discharge port directions.

• Set desired angle with checking the vane angle movement of the product.

• The individual vane control function is an additional function of a product, and it may not work in some

products.

Individual vane angle control (Optional)

Press SET/CLEAR button to reserve or cancel the individual vane angle control function.

3

It is the function that can control 4 vane angles individually in the ceiling type 4Way

cassette product group.

Press the FUNCTION SETTING button 3 times.

(4 times during heating operation)

Individual vane angle control symbol will blink.

• If you press the SET/CLEAR button in that time,

all vanes are set to standard angle.

1

Set each vane angle by pressing up/down/left/right direction keys.

• Every time the button is pressed, corresponding vane angle and set

values are displayed.

• When up direction button is pressed, the display window appears as

of the figure in the right, and the angle can be set to 1~6.

2

20 Multi Air Conditioner

Maintenance and Service

Plasma filter

Deodorizer

filter

Removal of Filters

Open the front panel as shown.

Then pull the filter tab slightly forward to remove the air filter.

After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.

Plasma filter

Front panel

Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and

unplug the power cord.

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.

Never use any of these

• Water hotter than 40°C(104°F). It may cause deformation and discoloration.

• Volatile substances. They may damage the surface of the air

conditioner.

Air Filters

The air filters behind the front panel / grill should be checked and

cleaned once in every 2 weeks or more often if necessary. To remove

the filters see the self explanatory diagrams for each model type. Clean

the filters with a vacuum cleaner or warm soapy water. If dirt is not

easily removed, wash with a solution of detergent in luke warm water.

Dry well in shade after washing and reinstall the filters back in place.

Plasma Filters

The plasma filters behind the air filter should be checked and

cleaned once in every 3 months or more often if necessary. To

remove the filters see the self explanatory diagrams for each

model type. Clean the filters with a vacuum cleaner. If it is dirty

wash it with water and dry well in shade an install back in place.

Deodorizer Filters or Allergy Free Filter +

Triple Filter

Remove the deodorizer filters or allergy free filter + triple filter

behind the air filter and expose them in direct sunlight for 2 hours.

And then insert these filters into original position.

P

o

w

d

e

r

[Artcool Mirror Type]

[Standard Type]

Standard/Standard Libero/Artcool Mirror Type

Maintenance and Service

La page charge ...

LG LMAN125HV Le manuel du propriétaire

LG LMAN125HV Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents