Panasonic TC26LE60 - 26" LCD CLR TV Le manuel du propriétaire

Panasonic

Operating instructions

LCD Television

Manual de instrucciones

Televisor LCD

Modo,No.TC'26 LX60

N0morodomo_o,oTC'26LE60

TC'32LX60

TC'32LE60

I,

[

English

EspaSol

DOro-_ ° H_ml ....

DIGITAL ..................................

For assistance, please call : 1-800-211-PANA (7262)

or contact us at www.panasonic.com/contactinfo (U.S.A.)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505

or visit us at www.panasonic.ca (Canada)

Para solicitar ayuda, Ilame al: 1-800-211 -PANA (7262)

o visitenos en www.panasonic.com/contactinfo (EE.UU.)

Para solicitar ayuda, Ilame al: 787-750-4300

o visitenos en www.panasonic.com (Puerto Rico)

)

] [Resumen]

Please read these instructions before operating your set and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

Lea estas instrucciones antes de utilizar su televisor y guardelas para consultarlas en el futuro.

Las imagenes mostradas en este manual tienen solamente fines ilustrativos.

TQB2AA0661

Turn your own living room into a movie theater!

Experience an amazing level of multi-media

excitement

2

DB_ °

DiGiTAL

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbols are trademarks of Dolby

Laboratories.

Hi_llrlril| ,,_

_,_-_E_i_mONM_LTiMED,_,_T_R_A_E

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

Contents

Be Sure to Read

@Important Safety Instructions ....................... 4

Enjoy your TV !

Basic Features

@Watching TV............................................... 10

@Watching Videos and DVDs ....................... 12

Advanced Features

@Input Labels/Closed Caption ..................... 13

@How to Use Menu Functions

(picture, sound quality, etc.) ....................... 14

@Channel Lock ............................................. 16

@Editing and Setting Channels .................... 18

@Operating Peripheral Equipment ............... 20

@Control with HDMI "HDAVI Control". .......... 21

@Recommended AV connections ................. 22

@Accesorios/Opci6n ..................................... 24

@Identificaci6n de los controles .................... 25

@Conexiones ................................................ 26

@Ajuste inicial ............................................... 27

@Para ver la televisi6n ................................. 28

@C6mo utilizar las funciones de los menOs..... 30

@Para ver videos y DVDs ............................. 32

@Control con HDMI "HDAVI Control". ........... 33

@Conexiones AV recomendadas .................. 34

FAQs, etc.

@Remote Control Operation/Code List ......... 36

@Ratings List for Channel Lock .................... 39

@Technical Information ................................. 40

@Maintenance .............................................. 42

@FAQ ............................................................ 42

@Specifications ............................................. 44

@Limited Warranty (for U.S.A.) ..................... 45

@CustomerServices Directory (for U.S.A.) ....... 46

@Limited Warranty (for Canada) ................... 47

@CustomerServices Directory (for Canada)....... 48

3

I

portant Safety I

structi

CAUTION

WARNING: To reduce the risk of electric shock, do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

,_The lightning flash with

arrow head within a triangle

is intended to tell the user

that parts inside the product

are a risk of electdc shock to

persons.

,_The exclamation point within

a triangle is intended to

tell the user that important

operating and servicing

instructions are in the papers

with the appliance.

This reminder is provided to direct the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as

close to the point of cable entry as practical.

Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD

TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space

from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface.

This LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to

your home consult your television dealer or local power company.

16) Follow all warnings and instructions marked on the LCD TV.

17) Never push objects of any kind into this LCD TV through cabinet

slots as they may touch dangerous voltage points or short out parts

that could result in a fire or electric shock. Never spill liquid of any

kind on the LCD TV.

18) If an outside antenna is connected to the television equipment,

be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges.

In the U.S. Section 810-21 of the National Electrical Code

provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

EXAMPLE OF ANTENNA

GROUNDING AS PER

(NEC) NATIONAL

ELECTRICAL

CODE

i.... ANTENNA

LEAD-IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NECSECTION810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

4

19)An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care should be taken

to keep from touching such power lines or circuits as contact with them might be fatal.

20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the LCD TV.

c. If the LCD TV has been exposed to rain or water.

d. If the LCD TV does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to restore the LCD

TV to normal operation.

e. If the LCD TV has been dropped or the cabinet has been damaged.

f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.

21 )When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer

that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other

hazards.

22)WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN

OR MOISTURE.

DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET.

(INCLUDING ON SHELVES ABOVE, ETC.)

23)WARNING : SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL

PARTS AWAY FROM YOUNG CHILDREN.

DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS

AND PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING PLAYED WiTH BY YOUNG CHILDREN,

CREATING THE POTENTIAL RISK OF SUFFOCATION.

24) CAUTION : TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

25)CAUTION : USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.

26) CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME

OR EQUIVALENT TYPE.

[] This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of

these materials may be regulated in your community due to environmental considerations. For disposal or recycling

information please contact your local authorities, or the Electronics Industries Alliance: www.eiae.org.

Federal Communication Commission Information

This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause or receive interference, which can be

determined by turning equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the TV antenna.

Increase the separation between TV and other equipment.

Connect TV into separate outlet from other equipment.

Consult the dealer or an experienced radio / TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate this equipment.

5

Accesso "es/O 3ti

Check you have all the items shown.

J

Accessories

[] Remote Control

Transmitter

eEUR7613ZG0

[] Operating

Instructions

[] Batteries for the Remote

Control Transmitter (2)

@AA Battery

[]Product Registration Card

(U.S.A.)

[]HDMI Cable

(for TC-26LE60 and TC-32LE60)

[]Customer Care Plan Card

(U.S.A.)

push

slide open

Note the correct

polarity (+ or -).

Caution -_

e Incorrect installation may cause battery leakage and corrosion,

resulting in damage to the remote control unit.

@Do not mix old and new batteries.

e Do not mix different battery types (such as alkaline and

manganese batteries).

e Do not use rechargeable (Ni-Cd) batteries.

e Do not burn or break batteries.

e Make a note of the remote control codes before changing

batteries in case the codes are reset. (p. 37-38)

Please contact your nearest Panasonic dealer

to purchase the recommended wall-hanging

bracket. For additional details, please refer to the

wall-hanging bracket installation manual.

Watt-hanging bracket

(vertical)

e TY-WK32LR2W

WARNING

e Failure to use a Panasonic bracket or choosing to mount the unit

yourself will be done at the risk of the consumer.

Any damage resulting from not having a professional installer

mount your unit will void your warranty.

@Always be sure to ask a qualified technician to carry out set-up.

Incorrect fitting may cause equipment to fall, resulting in injury

and product damage.

e Do not mount this LCD Television directly below ceiling lights

(such as spotlights, floodlights or halogen lights) which typically

give off high heat. Doing so may warp or damage plastic cabinet

parts.

Remove two screws

Pull out the plastic portion

or thick soft cloth

Remove four screws

Pull out the metallic portion

6

Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections)

will fall on the screen.

Use of some types of fluorescent lighting can reduce remote control transmitter range.

Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or

moisture.

Adjust the stand to your desired angle.

The stand angle can be rotated 20 ° to the right / left.

Identifyi

C rol

Switches TV/VIDEO

J]ol ........ I Power indicator (on:red, off: no light)

Remote control

sensor

/

_ Within about 23 feet (7 meters) in front of the TV set.

€The TV consumes some power as long as the power cord is inserted into the wall outlet.

Turns power On/Off

(used when the unit Power button is on)

POWER button

Volume

navigations

Selects channels

in sequence

Selects Audio Mode for TV Viewing

(p. 10)

Sets the remote to communicate with

other equipments (p. 20)

Volume

Menu navigations

Selects channels in sequence

Menu navigations

Displays Main Menu (p. 14-15)

Selects input mode (p. 12)

Displays or removes the channel banner

(p. 10)

Switches to previously viewed channel

and input mode.

Sleep timer (MINUTES) (p. 10)

Changes aspect ratio (p. 11,40)

Selects/OK/Change

RETURN (to previous menu)

Exit (from the menu)

Operates the Favorite channel list

function. (p. 11)

GUIDE for DBS

Sound mute On/Off

Numeric keypad to select

any channel or press to enter

alphanumeric input in menus. (p. 10)

Direct channel access for DTV and

DBS (p. 10)

External equipment operations

(p. 12, 36) (VCRs, DVDs, etc.)

C

nect"

mWatching TV

Back of the unit

Power Cord

(Connect after all the

other connections.)

To record TV shows

Cable BOX

IN OUT

#

or

VHF/UHF aerial

or

ANT IN

"_(_ ANT OUT

Video recorder

with TV Tuner

DVD Recorder/VCR )

S-Video signals have

priority.

Note

@All cables and external equipments shown in this book are not supplied with the TV.

@For additional assistance, visit us at www.panasonic.com

@When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input terminal and

the VIDEO input terminal are connected.

@When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be

output through "OUTPUT" terminals.

@Some programs contain a copyright protection signal to prevent VCR recording.

8

First Ti Setup

"First time setup" is displayed only when the TV is turned on for the first time after the power cord is

inserted into a wall outlet.

Available only when "Auto power on" (p. 14-15) is set to "Off".

@

oj

o_

Turn the TV On with the POWER

button

Select your language

t_ O select

F_ English _ Espa_ol 4-> Frangais eq

RETURN

EXIT

0 Press to go to previous screen.

Or, select _ icon, then press OK

for same results.

Auto channel setup

_l_Select "Auto program"

- r'z)next

- ,,f)select

_Select antenna and input modes

I ANT In I

Cable: Cable TV Antenna: Antenna

I Mode I

All •digital and analog

Analog •analog only (Reduces time for

scanning)

@About broadcasting systems

Analog : traditional TV system

Digital : new system that allows you to view

more channels featuring high-quality

video and sound

(_Start scanning the channels

"Start

scan"

@Available channels

(analog/digital)

are automatically

set.

@Confirm registered channels

-,0_ select

"Apply"

@ok

@If OK is not pressed after selecting "Apply",

the channels will not be memorized,

[] Press to exit or return to previous screen

RETURN

@ EXIT

C)

f Note ")

@To change setting later, go to Menu screen (p. 14-15)

@@

co

c_ "*

®_-d.

O'¢

=03

¢

r--

9

Watt

==

|

TV

Connect cable Box when watching cable TV. (p. 8)

® For receiving digital broadcasting of cable TV, connect Cable TV directly to "ANT" terminal.

a channel number

@®®

®®®

or ®®®

@

[] To directly input the digital channel

number

PROG

When tuning digital channel,

press the button to enter the

minor number in a compound

channel number.

example: CH15-1" (_ (_ p(_c (_

[] Other Useful Functions (Operate after 0_)

Switches the unit OFF in a preset amount of time from 0 to 90 minutes in 30

minute intervals.

SLEEP r- REW ® 0/30/60/90 (minutes)

[] Selects Audio Mode for TV Viewing

SAP

® Digital mode

Press SAP to select the next audio track (if available) when receiving a digital channel.

@Analog mode

Press SAP to select the desired audio mode.

• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)

Displays or removes the channel banner.

RECALL Channel

Station SAP Signal Picture Sleep timer

identifier resolution mode remaining time

Rating Level Aspect ratio

10

Change the aspect (p. 40)

TV/VCR

O b_ 4 _J

_ Each press changes the mode.

• 480i, 480p:FULL/JUST/4:3/ZOOM

• 1080i, 720p:FULL/H-FILL/JUST/4:3

FAVORITE

GUIDE

[] FAVORITE

Channel numbers registered in Favorite are displayed on the favorite tune

screen. Select the desired broadcast station with the cursor, or using number

keys. (See below)

)

® Reselect "Cable" or "Antenna" in "ANT In" of "Auto program" to switch the signal reception between cable TV and

antenna. (p. 19)

®The channel number and volume level remain the same even after the TV is turned off.

Display the channel to be placed on the Favorites list.

2

FAVORITE

GUIDE

Hold down FAVORITE for several

seconds.

• Press FAVORITE repeatedly

to change between pages (1/3,

2/3, 3/3, or exit). Pressing 4 _-

also changes the page.

Press A Tto highlight a position

on the list.

Then, press OK to memorize the

displayed CH in that position.

• You can also use the NUMBER

keys (1-9 and 0) to select the

recorded list numbers (1-9 and

0). By doing so, the numbers

will be directly recorded without

having to press the OK key.

® To delete a favorite channel

A memorized channel can be removed from the list by

holding down FAVORITE while it's position is highlighted.

FAVORITE

GUIDE

Press FAVORITE.

• Press FAVORITE repeatedly

to change between pages (1/3,

2/3, 3/3, or exit). Pressing 4 _-

also changes the page.

2

3

ok

Press A _' or a Numbered key

(1-9 and 0) to highlight a channel

on the list.

• Selecting a channel number

from the list with the Number

keys will display the channel

directly.

Press OK to display the

highlighted channel.

®

93

C)

C_

---4

<

11

Watt

m

|

Videos and DVDs

Some Panasonic equipments connected to the TV unit can be operated with the remote control.

Programming the remote control is necessary to operate other manufacturers' products. (p. 20, 36-38)

With VCR or DVD turned On

Switch to external input

Press to display the Input select menu.

TV/VlDEO

Select the input mode

®@@

@@@

®®@

®

(initial screen)

or

Press corresponding NUMBER

key on the Remote Control to

select the input of your choice.

select Press to select the input of your

choice, then press "OK".

® If during selection, no action

enter is taken for several seconds,

the Input selection menu is

exited.

®The terminal and label of the connected

equipment is indicated.

To label the each connected equipments (p. 13)

- Label Terminal

[example]

[] Press to return to TV

TVNIDEO

0

Operate

the VCR or DVD with the remote control

(example)

Note

@For details, see the

manual of the

equipment

or ask your local

dealer.

Rewind/Fast Forward

Play

Pause

Stop

VCR Record

TV/VCR

Channel Down/UP

(For other operations, see p. 36)

Reverse/Forward

Play

Pause

Stop

Open/Close

Slow Reverse/Forward

12

Labels/Closed Capti

CC

_ Select "input labels" or "CC"

input labels

RETURN

' '_ Set [] Press to exit EXIT

0

Setup

The labels of equipments connected to external input terminals can be indicated for easy

recognition on the screen. (In selecting input mode of p. 12 @)

Select the terminal and the label of the external equipment

¢ Terminal: Comp./HDMI!Videol-3

@Label: SKIP*/VCR/DVD/CABLE/DBS/PVR/

GAM E/AUX!iBLAN K] -Label

* If "SKIP" is selected for a

non-connected terminal,

its input is skipped when

switched with TV/VIDEO

button.

[example]

Terminal

The television includes a built-in decoder that is capable or providing a visual display of the

audio portion. The program viewed must provide Closed Captioning (CC) for the television to

display it. (p. 40)

[] Select the item and set

fS_ 0; select

@The settings in "Analog" or "Digital"

depend on the broadcaster.

IViode

Analog

CC1-4:

T1-4:

I Digital

Select "On" (when not using, select "Off").

(Choose the closed caption service of

Ana og broadcast ng.)

Information related to pictures

(Appears at bottom of screen)

Textual information

(Appears over entire screen)

I(The Digital Closed Caption menu lets you

configure the way you choose to view the

digital captioning.)

Select the setting.

@"Primary", "Second.", "Service 3", "Service 4",

"Service 5", "Service 6"

[] To make more in-depth display settings in digital programs

Select "Digital setting" and press "OK" button @ Select the item and set

® Size: Text size

® Font: Text font

® Style: Text style (Raised, Depressed, etc.)

® Foreground: Color of text

® Fore opacity: Opacity of text

® Background: Color of text box

® Back opacity: Opacity of text box

® Outline: Outline color of text

(Identify the setting options on the screen.)

(1/3)

[] To reset the settings

Select "CC reset" and press "OK" button

@®

5

:3-r-

CC3(1)

o_©

('D-

O0

Oo Co

eL©

___.

C?o

13

cti

Various menus allow you to change settings for the picture, sound,

and other functions so that you can enjoy watching TV with your

preferences set.

Display menu

MENU ® Displays the functions that

can be set (varies according

to the input signal)

Select the menu

Menu

Picture

Select the item

[] Press to exit or return

to previous screen

RETURN

EXIT

(example: Picture menu)

Adjust or select

Pic. mode

(example: Picture menu)

or

select

[]Menu

Menu

list

L¸ii'Li item

Normal

Pic. mode

Back light

Picture, Brightness,

Color, Tint,Sharpness

Color temp

AI picture

Zoom adjust

Video NR

3D Y/C filter

Color matrix

Black level

Normal

Bass

Treble

Balance

AI sound

Surround

HDMI in

Audio leveler

Sleep

CH scan

Language

Program channel

input labels

CC

Auto power on

Prog-out stop

Ctrl with HDMI

Power save

About

Reset

14

Resets all picture adjustments to factory default settings except for "Other adjust"

Basic picture mode (Vivid/Standard/Cinema)

Adjusts luminance of the back light.

Adjusts color, brightness, etc. for each picture mode to suit your

taste

I Normal

I Pic. mode

IBack light

_rt_/ess / _pness

Selects level of warm colors (red) and cool colors (blue) (Warm/Cool/Normal)

Controls dark areas without affecting the black level or brightness in the overall picture (On/Off)

Adjusts vertical alignment and size when aspect setting is "ZOOM" (p. 40)

Reduces noise, commonly called snow. Leave off when receiving a strong signal. (On/Off)

Minimizes noise and cross-color in the picture. (On/Off)

® Not valid on component and HDMI.

Selects image resolution of component-connected devices (SD/HD)

® SD: normal vision HD: high-definition vision

® Only 480 p signal accepted; regular TV (NTSC) is not available.

Select Dark or Light depending on the picture conditions. (Dark/Light)

The dark scene becomes easy to see. (Valid only for external input signals.)

Reset Bass, Treble and Balance adjustments to factory default settings.

Increase or decrease the bass response.

Increase or decrease the treble response.

Emphasize the left / right speaker volume.

Equalize overall volume levels across all channels and VIDEO inputs. (On/Off)

Enhances audio response when listening to stereo. (On/Off)

Selects according to the signal when HDMI is connected (Auto/Digital/Analog)

® Auto: Automatically selects Analog / Digital signal

Minimizes volume disparity after switching to external inputs

Automatically turns off the TV after a pre-selected amount of time. ® 0/30/60/90 (minutes)

Timer setting is also possible by pressing the "Sleep" button on the remote control. (p. 10)

Locks the channels and programs (p. 16-17)

Selects channels to be displayed when pressing "Channel up/down" buttons. (Fav./AII)

® Fav.: Only channels registered as Favorite (p. 19)

Selects the screen menu language (p. 9)

Sets receiving channels. (p. 18-19)

Displays labels of external equipments (p. 13)

Displays subtitles (Closed Caption) (p. 13)

Sets how to power on the TV. (Set/Off)

Set : Connect power cord plug to Cable box etc. and control TV's On/Off on the connected

equipment. (The Sleep Timer will not function if Auto power on is set.)

Off : Supply Power from wall outlet and control TV's On/Off on TV side.

("First time setup" menu is displayed when power cord plug is re-inserted after removing it

from the wall outlet.)

Stops output of the pictures specified in this menu.

(OfflComp.IHDMIIVideo l/Video 2Nideo 3)

® Comp./HDMI cannot output video signals regardless of "Prog-out stop" setting.

Controls equipments connected to HDMI terminals. (p. 21,22) (On/Off)

Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room

(Standard/Saving)

Displays TV version and software license.

Performing Reset will clear all items set with Setup, such as channel settings. (p. 18) Use Reset with care.

I Color temp

IAI picture

[Zoom adjust J

IVideo NR

13D Y/C tilter

I Color matrix

I Black level

I Normal

IBa_ I_1

ITreble I_

IBalance

IAI sound

ISurround

IHDMIin

IAudio leveler

ISleep

I CH scan

[Language

[Program channel

[Input labels

[cc

J

IAuto power on

IProg-out stop

ICtrl with HDMI

IPower save

[About J

LReset J

@

..-.. "T"

"(3O

Pc

0

0_

,:_..co

® In VIDEO mode, the Audio menu and Setup menu give a smaller number of options.

15

Cha

I Lo

You can lock out specified channels or shows to prevent children from watching objectionable content.

TV

\

[] Press to exit

RETURN

EXIT

0

@Make a note of your

password in case

you forget it. (If you

have forgotten your

password, consult your

local dealer.)

Note

@When you select a

locked channel,

a message will be

displayed that allows

you to view the

channel if you input

your password.

Display menu

MENU

Select "Lock"

You will be asked to enter your password each time you display the Lock menu.

Menu //'_'_ -_'- , ,_2_next

_ =_ select

Input your 4-digit password

A4-digit code must be entered to view a blocked program or change rating

settings.

(_®® @For the first time, input the

®®® number twice to register it.

®®®

®

Select the Lock mode

change

@Off: "Channel lock" not activated

@All: Locks all channels and Video inputs

@Game: Locks CH3, CH4, and Video inputs

@CH: Locks specified channels (analog/digital)

[] To change the password

_i_ln Q, select "Change password" and press "OK" button

(_lnput the new 4-digit password twice

[]To cancel the Channel lock"

Select "Off' in O

16

[] To se(ect the channel or the rating of the program to be (ocked

Select up to 7 (1-7) channels to be blocked out. These channels will be blocked out regardless

of the program rating.

Select "CH" in Q

_i_Select "Channel"

"V-chip" technology enables restricted shows to be locked according to TV ratings.

(_0Select "Program"

@Select the rating category you wish

to follow

® MPAA:U.S movie ratings

® U.S.TV:U.S TV program ratings

® C.E.L.R:Canadian English ratings

@ C.F.L.R:Canadian French ratings

_Select the rating to be locked

Example of "MPAA" (U.S movie ratings)

Off I No rating

i

G I GeneralAudience:Alt ages admitted

PG I Parental Guidance Suggested

i

Parents Strongly Cautioned: Inappropriate for

PG:131 children under I3

i

R I Restricted: Under 17 requires accompanying

parent or adult guardian

NC-i71 Noone17andunderadmitted

I

x I Adults only

® To get other information (p. 39)

[] To disable recording of the locked program

Select "Monitor out" in "Program lock" menu (_)

On : Turns on the monitor terminal output for programs that have

been set to "Blocked."

Off : Turns off the monitor terminal output for programs that have

been set to "Blocked."

©

cy

93

(1)

F-

o

C)

f

k Caution

@The V-Chip system that is used in this set is capable of blocking "NR" programs (non rated, not applicable and

none) as per FCC Rules Section15.120(e)(2). If the option of blocking "NR" programs is chosen "unexpected and

possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of

programming:"

• Emergency Bulletins (Such as EAS messages, weather warnings and others)

• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports

• Weather

)

@The Off rating is independent of other ratings.

@When placing a block on a specific age based rating level, the Off rating and any other more restrictive ratings will

also be blocked.

17

Setting C

The current channel settings can be changed according to your needs and reception conditions.

_ Display menu

MENU

Select "Setup"

Menu

I

Select "Program channel"

Program channel

[] Press to exit

RETURN

EXIT

0

Select the function

@)next

(l_,select

18

Set

_ T°resett",tsetti_os°'set°pme°° , ,, "1

Select'Reset in Setup menu (@) and press 'OK button /

®Inputyour 4:,digit password with number buttons , ,, /

® bSeltoCt'YES on the c°nfirmation screen and Press'°K

Automatically searches and adds receivable channels to memory.

_Select "ANT In" _-(Select Cable orAntenna

_2_Select "Mode" ÷SelectAII orAnalog

All: Analog and digital

Analog: Analog only

_3_Select "Start scan"

Settings are made automatically

@After completing the setting,

select "Apply". (see below @).

@All previously memorized

channels are erased.

Use this procedure when changing setting of recewing channels or changing the channel display.

Also, use to add or delete channels from channel list manually.

_0Select "Edit" _3_Ed it

No

select

/F_ 0)select item to edit

__'_ (Caption/Favorite/Add)

Add

@Caption:

Changes the station identifier

@Favorite:

Registers channel to Favorites List

@Add:

Adds or deletes channels

@Caption

[ Preset ]

Select the station identifier

[ Caption detail ]

Rename (maximum 7 characters available)

_#Favorite

[ Favorite ]

Select the number

@Add

Press "OK" button to select "Yes (add)" or "No

(delete)"

@Select "Apply"

Press to move cursor to "Apply"

RETURN /_--\

oK _ ok

EXIT (to enter your

....._# \_/ program)

Check the signal strength if interference is found or freezing occurs on a digital image.

CH

nat intensity

channel

@If the signal is weak, check the antenna.

If no problem is found, consult your

local dealer.

Note

@Not available if "Cable" is selected in "ANT In"

(see above).

@Effective only for digital antenna channels.

m

93

tm

03

G:3

©

::3-

93

@If"Channel lock" (p. 16) is activated and "Auto", "Manual" or "Signal meter" is selected, "Enter password." will be displayed. 19

perating Peri heral Eq ='prnent

You can operate other manufacturers' equipments using this TV's remote control.

Connect the external equipments to the TV and

Power Off the external equipments

Press both buttons simultaneously

for more than 3 seconds.

@Release the buttons when the equipment selection

buttons start flashing.

®®®

®@®

®®®

@

Select the equipment

with the equipment selection button

@The selected button remains lit (other buttons are not

lit).

input the equipment's 4-digit remote

control code (p.37-38)

Operate the equipment with the

remote control (p.36)

@The external equipment turns On.

[] If the equipment does not operate with

remote control

@When your equipment has a single code

@ Input the remote control code again

@When your equipment has multiple codes

@ Change the code with @ above and test again

@Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

This procedure searches all codes and is called the "sequence method."

_After step @ above, change the code and @_When the correct code is found

test

Operate the equipment with the

remote control (p. 36)

@Repeat until the code is found

@It may take many attempts before the correct

code is found

20

La page charge ...

Panasonic TC26LE60 - 26" LCD CLR TV Le manuel du propriétaire

Ce manuel convient également à

Panasonic TC26LE60 - 26" LCD CLR TV Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents