Sylvania SDVD7049 Le manuel du propriétaire

Marque: Sylvania

Modèle: SDVD7049

Catégorie: Lecteurs DVD

Taper: Le manuel du propriétaire

MODEL:SDVD7049

7 INCH PORTABLE DVD PLAYER

SYLVANIA is a registered trademark of OSRAM SYLVANIA INC. Used under license.

mavis

DNcn=mavis, o=junlan,

ou=marketing, email=mkts,

c=CN-

2017.09.23 14:36:58

+08'00'

2017.09.

15:00:03

+08'00'

lxy

2017.09.23

17:25:30 +08'00'

CAUTION: TO REDUCE THE RISK OF

ELE CT RIC S HO CK, D O NOT RE MOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SER V ICIN G TO Q UALI F I E D S ERV I C E

PERSONNEL.

CAUTION:

T H I S DI G ITA L VI D E O D I S C P L AYE R

EMPLOYS A LASER SYSTEM.

TO E N S U RE P R OP E R U S E OF T HI S

PRODUCT.

PLEASE READ THIS OWNER`S MANUAL

CAREFULLY AND RETAIN FOR FUTURE

REFERENCE. SHOULD THE UNIT

REQUIRE MAINTENANCE, CONT ACT AN

AUTHORIZED SERVICE LOCATION-SEE

SERVICE PROCEDURE.

USE C O N T ROLS , AD J U S T M ENTS O R

THE PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

TO P RE VE NT DIR EC T EXPO SU RE TO

LASER BEAM, DO NOT TRY TO OPEN THE

ENCLOSURE. VISIBLE LASER RADIATION

MAY BE PRESENT WHEN THE ENCLOSURE

IS OPENED. DO NOT STARE INTO BEAM.

WARNING:

TO R E D U CE T H E R IS K O F F I R E O R

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

WARNING:

TO R E D U CE T H E R IS K O F F I R E O R

E L EC T RI C S H O C K , A N D A N N O Y I N G

INTERFERENCE, USE THE RECOMMENDED

ACCESSORIES ONLY.

SURGE PROTECTORS:

It is recommended to use a surge protector for

AC connection. Lightning and power surges

ARE NOT covered under warranty for this

product.

The lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product`s enclosure that may

be of sufcient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

o f i m p o r t a n t o p e r a t i n g a n d

maintenance(servicing) instructions in the

literature accompanying the appliance.

DANGER:

Invisible and hazardous laser

radiation when open and interlock

failed or defeated. Avoid direct

exposure to beam.

FCC NOTICE:

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant t o part 15 of the FCC

Rules. These limits are designed to provide

re a son a ble pro t ect i on a gai n st h arm f ul

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not Installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications.

H o we v er, t h e r e is n o g u a r a n t e e t h a t

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

recepti on, which can be determine d by

turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

● Re o ri ent o r r el oca te th e r ec eiv in g

antenna. Increase the separation between

the equipment and receiver.

● Connect the equipment into an outlet

on a circuit different from that to which the

receiver is connected.

● Consult the dealer or an experienced

radio/TV technician for help.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

The DC inlet/power adapter is used as disconnect

device, the disconnect device shall remain readily

operable.

lxy

2017.09.23

17:26:14

+08'00'

FCC WARNING:

To assure continued compliance, follow the

attached installation instructions and use only

shielded cables when connecting to other

devices. Modifications not authorized by the

manufacturer may void user`s authority to

operate this device.

WARNING

USE UNDER SUPERVISION OF AN ADULT

DUE TO LONG CORD

This unit has a long AC cord or other long

cord that can easily be tripped on or pulled on,

causing injury, Please make sure it is arranged

so it will not drape over a tabletop, etc. Where

it can be pulled on by children or tripped over

accidentally.

EXERCISE CAUTION AS UNIT HAS SHARP

POINTS.

Before using the unit, be sure to read all

operating instructions carefully. Please note

that these are general precautions and may

not pertain to your unit.

1 ) Read these instructions.

All the safety and operating instructions should

be read before the product is operated.

2 ) Keep these instructions.

The safety and operating instructions should

be retained for future reference.

3 ) Heed all warnings.

All warn ings on th e pro duc t and in t he

operating instructions should be adhered to.

4 ) Follow all instructions.

All operating and use instructions should be

followed.

5 ) Do not use this apparatus near water.

Do not use this product near water and

moi sture, for e xampl e: ne ar a ba thtub ,

washbowl, kitchen sink or laundry tub; in a wet

basement; or near a swimming pool.

6 ) Clean only with dry cloth.

Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a dry cloth for cleaning.

7 ) D o n o t b l o c k a n y v e n t i l a t i o n

openings. Install in accordance with the

manufacturer's instructions.

Slots and openings in the cabinet and in the

back or bottom are provided for ventilation, to

ensure reliable operation of the product and

to protect it from overheating. These openings

must not be blocked or covered. The openings

should never be blocked by placing the product

on a bed, sofa, rug or other similar surface.

This product should never be placed near or

over a radiator or heat source. This product

should not be placed in a built-in installation

such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's

instructions have been adhered to.

8 ) Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus(including amplifiers) that produce

heat.

9 ) Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug

has two blades with one wider than the other. A

grounding type plug has two blades and a

third grounding prong. The wide blade or the

third prong are provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10 ) Protect the power cord from being

walked on or pinched particularly at plugs,

convenience

receptacles, and the point where they exit from

the apparatus.

11 ) Only use attachments/accessories

specied by the manufacturer.

12 ) Use only with the cart, stand, tripod,

bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is

use d, use caut ion when

moving the cart/apparatus

combination to avoid injury

from tip-over.

A n a p p l i a n c e a n d c ar t

combination should be

lxy

2017.09.2

3 17:26:22

+08'00'

moved with care.

Quick stop, excessive force and uneven

surfaces may cause the appliance and cart

combination to overturn.

13 ) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

To protect your product from a lightning storm,

or when it is left unattended and unused for

long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable

system.

This will prevent damage to the product due to

lightning and power-line surges.

14 ) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus

has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture does not operate normally, or

has been dropped.

15 ) Power source.

This product should be operated only from the

type of power source indicated on the marking

label.

If you are not sure of the type of power supply

to your home, consult your appliance dealer or

local power company. For products intended

to operate from battery power, or other source,

refer to the operation instructions.

16 ) Power lines

An outside antenna system should not be

located in the vicinity of overhead power lines

or other electric light or power circuits, or where

it can fall into such power lines or circuits.

When installing an outside antenna system,

extreme care should be taken to keep from

touching such power lines or circuits as contact

with them might be fatal.

17 ) Overloading

Do not overload wall outlets and extension

cords as this can result in a risk of fire or

electric shock.

18 ) Object and liquid entry

Never push objects of any kind into the

product through openings as they may touch

dangerous voltage points or short out parts

that could result in re or electric shock. Never

spill or spray any type of liquid on the product.

19 ) Outdoor antenna grounding

If an outside antenna is connected to the

product, be sure the antenna system is

grounded so as to Provide some protection

against voltage surges and built up static

charges. Section 810 of the National Electric

Code ANSI/NFPA 70 provides information with

respect to proper to grounding of the mast and

supporting structure, grounding of the lead-

in wire to an antenna discharge product, size

of grounding conductors, location of antenna-

discharge product, connection to grounding

electrodes and requirements for the grounding

electrodes.

20 ) Service

Do not attempt to service this product yourself

as opening or removing covers may expose

you to dangerous voltage or other hazards.

Re fe r all s er vi cing to q ua lifie d se rvice

personnel.

21 ) Replacement parts

When replacement parts are required, be sure

the service technician uses replacement parts

specified by the manufacturer or those that

have the same characteristics as the original

parts.

Unauthorized substitutions may result in re or

electric shock or other hazards.

22 ) Safety check

Upon completion of any service or repairs

ANTENNA LEAD

IN WIRE

ANTENNA DISCHARGE UNIT

( NEC SECTION 810-20 )

GROUNDING CONDUCTORS

( NEC SECTION 810-21 )

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

( NEC ART 250, PARTH )

GROUND CLAMPS

lxy

2017.09.2

3 17:26:29

+08'00'

to this product, ask the service technician to

perform safety checks to determine that the

product is in proper operational condition.

23 ) Wall or ceiling mounting

The product should be mounted to a wall

or ceiling only as recommended by the

manufacturer.

24 ) Damage requiring service

Unplug this product from the wall outlet and

refer service to qualified service personnel

under the

following conditions.

a ) When the power-supply cord or plug is

damaged.

b ) If liquid has been spilled or objects have

fallen into the product.

c ) If the product has been exposed to rain or

water.

d ) If the product does not operate normally

by following the operating instructions. Adjust

only those controls that are covered by the

operating instructions, as an adjustment of

other controls may result in damage and will

and require extensive work by a qualified

technician to restore in the product to its

normal operation.

e ) If the product has been dropped or the

cabinet has been damaged.

in performance-this indicates a need for

service.

25 ) Note to CATV system installer

This reminder is provided to call the CATV

system installer's attention to Article 820-40

of the NEC that provides guidelines for proper

grounding and, in particular, specifies that

the cable ground shall be connected to the

grounding system of the building, as close to

the point of cable entry as practical.

NOTE: Refer all servicing to qualied service

personnel Servicing is required when the unit

has been damaged in any way such as the

has been damaged, liquid has been spilled

into unit, the unit has been exposed to rain or

moisture, the unit has been dropped or the unit

does not operate normally.

NOTES ON HANDLING:

● When shipping the unit, always use the

original shipping carton and packing materials.

For maximum protection, repack the unit as it

was originally packed at the factory.

● Do not use volatile liquids, such as insect

spray,

near the unit. Do not leave rubber or plastic

products in contact with the unit for a long time.

They will leave marks on the nish.

● The top and rear panels of the unit

may become warm after a long period of use.

This is normal and not a malfunction.

● When the DVD player is not in use, be sure

to remove the disc and turn off the power.

NOTES ON LOCATING THE DVD PLAYER:

When you place this unit near a TV, radio or

VCR, the playback picture may become poor

and the sound may be distorted. In this case,

move the unit away from the TV, radio or VCR.

NOTES ON CLEANING:

Use a soft, dry cloth for cleaning

● For stubborn dirt, soak the cloth in a weak

detergent solution, wring well and wipe. Use a

dry cloth to wipe it dry. Do not use any type of

solvent, such as thinner and benzene, as they

may damage the surface of the unit.

● If you use a chemical-saturated cloth to clean

the unit, follow that product's instructions.

Warning: Cle a n ing a n d ad j u stme n t of

lenses and /or other components of playback

mechanism should be performed by a qualied

service technician.

NOTES ON MOISTURE CONDENSATION:

Moisture condensation damages the DVD

player.

Please read the following carefully.

● Moisture condensation occurs, for example,

when you pour a cold drink into a glass on a

warm day. Drops of water form on the outside

f ) When the product exhibits a distinct change

following: the power-supply cord or plug

lxy

2017.09.23

17:26:35

+08'00'

of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit,

one of the most crucial internal parts of the DVD player.

Moisture condensation occurs during the following cases:

● When you bring the DVD player directly from a cold place to a warm place.

● When you use the DVD player in a room where you just turned on the heater, or a place where the

cold wind from the air conditioner directly hits the unit.

● ln summer, when you use the DVD player in a hot and humid place just after you moved the unit

from an air conditioned room.

● When you use the DVD player in a humid place.

Do not use the DVD player when moisture condensation may occur.

● lf you use the DVD player in such a situation, it may damage discs and internal parts. Remove the

disc, connect the AC/DC Adaptor to the DVD player and the wall outlet, turn on the DVD player and

leave it ON for two or three hours. After two or three hours, the DVD player will have warmed up

and evaporated any moisture.

- Do not disassemble, puncture, crush or expose your device to temperatures above 40 °C / 104 °F

- Keep your device away from fire or water.

- Keep your device from moisture and extreme temperatures.

- Do not use or leave the device in direct sunlight or a hot environment such as a vehicle etc.

that is in hot environment. Overheating can damage the device

- Do not overcharge the device – do not leave the device on the charger for very long after the battery

has been fully charged

- Device should be protected from any physical impact or damage and care should be taken

not to drop the device

- Only use the factory supplied charger. The use of unapproved charger or cable may cause the

battery to fail, explode and/or damage the device.

- Should your battery swell or expand, please immediately discontinue use of your device.

A probable cause is it having been overheated at some point or overcharged.

Please contact us for support .

W arning:

℃

CAUTION: Risk of fire and burns. Do not open, crush, heat above 60 or incinerate.

Follow manufacturer's instructions.

lxy

2017.09.23

17:26:58

+08'00'

The region number for this DVD Player is: 1

See the following page for information regarding region numbers.

PLAYABLE DISCS:

The following discs can be played back on this DVD player:

DISC TYPES:

DVD

Data on most DVDs is divided into sections called titles

and then into subsections called chapters, each of which

is given a title or chapter number. Some features of this

DVD player will not operate with some DVD discs as they

are preset. If a function you selected does not run as

desired , refer to the manual accompanying the DVD disc.

AUDIO CD

Data on an audio CD is divided into sections called tracks ,

each of which is given a track number.

IMPORTANT:

It is important that you read the manual that accompanies the DVD disc , as there are features that

are on the DVD player that cannot be used with certain DVDs .

There are also extra features on the DVD disc that are different for each DVD disc, so they are not

explained in this owner's manual.

This player conforms to the NTSC and PAL color systems . However , if you are in the USA , Canada

or Mexico,leave this setting on NTSC . If incorrectly set to PAL ,the TV picture may roll vertically. In

this case , set the TV system to NTSC.

Notes on Copyright:

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent

copyrighted material without permission. DVD video discs are copy protected, and any recordings

made from these discs will be distorted. This product incorporates copyright protection technology

that is protected by method claims of certain U.S. Patents and other intellectual property rights

owned by Macrovision

Corporation, and is intended for home and other limited viewing uses only, unless

otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Region Management Information:

This DVD Player is designed and manufactured to respond to the Region Management Information

that is recorded on a DVD disc. If the Region number described on the DVD disc does not

correspond to the Region number of this DVD player, this DVD player cannot play that disc. You may

not be able to play back some DVD video discs on this player if they were purchased from outside

your geographic area or made for business purposes. When you try to play back an unauthorized

disc, Wrong Region appears on the TV screen.

ABOUT DISCS

lxy

2017.09.2

3 17:27:34

+08'00'

LOCATION OF CONTROLS

SETUP

VOL+

OPEN

VOL

ENTER

11.

12.

13.

ŹOO

MODE

ǿŻŻ

10.

17.

18.

19.

20.

14.

16.

In setting menu, press to moving the cursor upward.

In disc playback mode, press to fast searching froward.

In setting menu, press to moving the cursor downward.

In disc playback mode, press to fast searching backward.

In setting menu, press to moving the cursor to left.

In disc playback mode, press to skip tracks backward.

In setting menu, press to moving the cursor to right.

In disc playback mode, press to skip tracks forward.

Press to start playback or pause.

In playback mode, press to prestop. Press again to stop completely.

Press to switch the TV Shape to 16:9, 4:3LB or 4:3PS.

Press to enter to disc selection menu.(Function depends on the disc recording).

Press to decrease volume level.

Press to enter to setting menu.

Press to confirm the selection (settings).

Press to open the disc door.

Press to increase volume level.

Charge Indicator

EARPHONE Jack

AV OUT ( Audio/Video Output ) Jack

Power ON/OFF Switch

DC IN Jack

15.

Remote Sensor

Power Indicator

lxy

2017.09.2

3 17:27:44

+08'00'

REMOTE CONTROL

POWER

1. POWER Button

2. VOLUME +/– Buttons

4. MENU Button

12.

15. SLOW Button

16. LCD ON/OFF Button

17. Numeric Buttons

18. SETUP Button

21. OSD (On Screen Display Button

22. SUBTITLE Button

23. ANGLE Button

24. PROG (Program Button

26. STEP Button

27. ZOOM Button

28. A-B Repeat Button

TITLE Button

N/P Button

10.

AUDIO Button

REPEAT Button

13.

11.

(

14.

GOTO Button

25. Button

3. MUTE Button

5. Direction Buttons

( Play/Pause Button

6723 %XWWRQ





ŻŻ

ǿŻŻ

( Skip Forward Button



( Fast Searching Forward Button



ǿŻŻ

ŻŻ

19.

( Skip Backward Button



20.

( Fast Searching Backward Button



N/P

LOCATION OF CONTROLS

lxy

2017.09.23

17:27:53

+08'00'

CONTROLS

MUTE

N/P

LCD ON/OFF

Press to turn on or off the LCD display.

SUBTITLE

ANGLE

Press to turn off the sound, press again to resume.

( Function depends on the recording of

During DVD playback, press repeatedly to select the

viewing angle

disc ).

During DVD playback, press repeatedly to select the

desired subtitle ( Function depends on the recording

of disc ).

Press to turn switch to AUTO, NTSC or PAL TV system.

TITLE

of the disc).

Press to return to disc's title page (Function depends

on the recording

Press to return to disc's menu page (Function depends

VOL ( VOLUME +/–

Press to increase or decrease volume.

(On Screen Display)

During playback, press the OSD button repeatedly to

read the information of playback status.

AUDIO

During disc playback, press repeatedly to select the

desired language or sound track.

(Function depends on

the recording of disc).

POWER

Press to turn to standby mode. Press again to turn

on.(For saving battery power, always turn off the unit

by slide the Power ON/OFF switch to OFF position.)

STEP

During movie playback, press STEP Button repeatedly

to play the movie frame by frame.

Press the Play/Pause Button to resume normal

playback.

SLOW

A-B Repeat

During Playback, press the A-B Button to define where

you want the section to start. Press A-B Button again

to define where you would like the section to end, the

unit will then play the selected section repeatedly and

continuously. Press the A-B Button again to resume

normal playback.

During playback, press the SLOW Button repeatedly

to set the slow motion speed. Press Play/Pause

Button to resume normal playback.

ZOOM

During movies playback, press the ZOOM Button

repeatedly to zoom in/out the picture. In zoom in mode,

press the Direction Buttons to select the parts of the

zoomed picture to watch. This

function is not available

on all discs.

(

OSD

on the recording of the disc).

(This function is not available on all

discs).

GOTO

In DVD playback mode, press the GOTO Button once.

The TT (Title), CH (Chapter) and establish time

selection menu will pop up on the screen. Using the

direction & numeric Buttons to select the desired title,

chapter or time then press the ENTER/OK Button to

start to play from the selected Title, Chapter or

establish time.

In CD playback mode, press the GOTO Button once.

The TRK (Track) and establish time (for selected track)

selection menu will pop up on the screen. Using the

direction & numeric Buttons to select the desired

track or establish time (for selected track) then press

the ENTER/OK Button to start to play from the selected

track or establish time.

lxy

2017.09.2

3 17:28:05

+08'00'

BATTERY INSTALLATION (REMOTE CONTROL)

Remote Control Sensor

Remarks:

POWER

1. When there is an obstacle between the unit and

the transmitter, the transmitter may not operation.

2. When direct sunlight, an incandescent lamp,

fluorescent lamp or any other strong light shines

on the remote control of the unit, the remote

operation may be unstable.

Battery installation:

1. Press the tab on the battery door and lift it off.

2. Install two (2) x AAA size batteries into the battery

compartment as the figure on right and the polarity

markings inside battery compartment.

3. Replace the battery door.

Battery Precautions:

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Besure to follow the correct polarity when installing the battery as indicated in the battery compartment.

A reversed battery may cause damage to the device.

the batteries to prevent damage or injury from possible battery leakage.

manufacturer's directions).

6. Do not dispose of battery in fire. Battery may explode or leak.

7. Clean the battery contacts and also those of the device prior to battery installation.

3. Do not mix different types of batteries together (e.g. Alkazline and Carbon-zinc)

or old batteries with fresh ones.

4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove

5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.

(Follow battery

AA A

15 feet (5m)

lxy

2017.09.2

3 17:28:15

+08'00'

The unit has a built- in Lithium-ion rechargeable battery.

Connect the small plug from the AC/DC Adaptor to the DC IN Jack on the right of unit.

1RWHV Your battery will last longer if you follow these simple guidelines

for caring for and storing it.

Recharge it as follows:



2. This is a special negative grounded

Car Adapter. Using this Car Adapter

with a plus grounded car can cause

malfunction.

3. Do NOT plug in the Car Adapter until

the car ignition is turned on.

4. Disconnect the Car Adapter from the

cigarette ligher and the unit after use.

POWER SOURCE

During charging, the Charge Indicator will light up red, when finished, it will turn green.

1. Connect to the cigarette lighter socket of a vehicle that has a 12V battery as the figure below.

Connect the AC/DC Adaptor to the wall outlet having AC 100-240V~; 50/60Hz.

Recharge and store the device within the temperature range of

5°C~35°C (40°F~95°F).

Do not overcharge (longer than 24 hours). Excessive charging or

Battery life naturally shortens slowly over time.

discharging may shorten the

battery’s life.

The rechargeable battery incorporated in this product is not user replaceable.

To the cigarette

lighter socket

To DC IN

Jack on the unit

Charging by the supplied Car Adaptor:

Charging by the supplied AC/DC Adaptor:

This unit is NOT compatible with a

vehicle that has a 24V battery.

lxy

2017.09.23

17:28:20 +08'00'

CONNECTIONS

Video input jack ( Yellow )

Audio left channel input jack ( White )

Audio right channel input jack ( Red )

Connected to the TV

*Plug the supplied earphone into EARPHONE Jack to listen privately.

lxy

2017.09.2

17:28:29

+08'00'

OPERATIONS

3. During playback:

the Power ON/OFF Switch to "ON" position to power on the unit, the Green Indicator

2. Press the "OPEN" Button to open the disc door. Place the disc on the center spindle with label side facing up.

Close the disc door then the player will start playback automatically.

1. Lift up the panel. Slide

on right cornor of the front panel will light.

4. To power off, press the POWER Button on the Remote Control to turn the player to standby mode.

Press again to turn the player on from standby mode.

(For saving energy, always power off the player by slide the Power ON/OFF Switch on the player to OFF

position then unplug the AC/DC Adaptor from wall outlet.)

~ Press the / Buttons repeatedly to fast search for a

specific section forward/backward.

Press the Play/Pause Button to resume normal playback.

~ Press the or Buttons repeatedly to skip to specific chapter/track.

~ Press the Play/Pause Button to pause, press again to resume normal playback.

~ Press the VOL (VOLUME) +/- Buttons to adjust volume level.

Repeat Playback:

During playback:

4. To cancel repeat function, press the REPEAT Button repeatedly until “REP: off” appear on the screen.

1. Press the REPEAT Button once, “REP: CHAPTER” will appear on the screen. The current chapter will be

playback repeatedly and continuously.

2. Press the REPEAT Button twice; “REP: TITLE” will appear on the screen. The current Title will playback

repeatedly and continuously.

3. Press the REPEAT Button the three times; “REP: ALL” will appear on the screen. All files on the current

disc will be playback repeatedly and continuously.

During playback:

3. To cancel repeat function, press the REPEAT Button repeatedly until “REP: off” appear on the screen.

1. Press the REPEAT Button once; “REP: REP 1” will appear on the screen. The current track will be playback

repeatedly and continuously.

2. Press the REPEAT Button twice; “REP: REP ALL” will appear on the screen. All files on the current disc will

be playback repeatedly and continuously.

(DVD Disc)

(CD Disc)

~ Press and hold the STOP Button to stop playback. The player will remember the point where

the disc was stopped. When press Button again, playback will start from this point.

Press and hold the STOP Button twice to stop completely, press Button to play from the very

beginning.

lxy

2017.09.23

17:28:35 +08'00'

OPERATIONS

352*press the

1. During CD or DVD playback,

( Program )

4. Using the Direction Button to select and highlight the "PLAY" or Button on the screen then press the OK

Button to start program playback.

(CD/DVD)Program:

2. Using the Direction, OK and Numeric Buttons to select and set the desired T (Title),

of the movie /music you wants.

The Program menu will appear as follows.

button.

DVD

T C

T C T C T C

01:03

--:--

PLAY CLEAR

TRACK01

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

2/16

TRACK03

TRACK04

there is wrong programming.

clear all the programmed items when

3. Using the Direction Button to select and highlight the "CLEAR" or Button on the screen then press the

OK Button to

C (Chapters), tracks

(for CD)

to clear the highlighted track one by one.

For CD Disc programming, you can use the direction Button to highlight the programmed track, then press the

Play/Pause Button on remote control

(

)

lxy

2017.09.2

17:28:48

+08'00'

SYSTEM SETUP

4. If TV Shape is selected, set the aspect ratio to match the connected TV.

TV System

Last Memory

Screen Saver

TV Shape

Default

SYSTEM SETUP

1. If TV System is selected, it can be set to NTSC, PAL or Auto to match the playing movie of connected TV.

2. If Last Memory is selected, if set it On, the unit will start playback from the position where the disc was

stopped last time.

3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is

paused for several minutes.

8. If Default is selected and set it to restore, all settings will be restored to factory setting.

TFT

Rating

Password

5. If Password is selected, press the button to highlight the , then enter four digit default password

"0000" to unlock the rating, press the ENTER/OK button to confirm. Now the lock status will be .

►

6. If Rating is selected, press the button to enter rating level, press or button to select the desired

►

rating level, then press the ENTER/OK button to confirm setting.

►

~ Rate levels:

KID SAFE:

Kid safe

G: All ages

PG: Parental Guidance

PG 13: Parental Guidance less than 13 years old

PG-R: Under 17 years old, Parental Guidance suggested

R: Under 17 years old, Parental Guidance strongly

NC-17: 17 years old or above

ADULT: Adult only

To change a new password, highlight the password column and enter a new four digit password under

unlocking status, press the ENTER/OK button to confirm password changing. After password is changed, the

new password and default password can be used.

Press the SETUP Button on remote control or on the unit, the setting menu will appear as below.

During setting, using Direction

◄, ►, ▲, ▼

Buttons to select and highlight the function needed to reset.

Press the ENTER/OK Button

to confirm the selection. After setting, press the SETUP

Button to save and exit.

Text to Speech

is OFF.

7. When Text to Speech is selected to ON, the player will have a voice during pressing each button, the default

lxy

2017.09.2

17:28:56

+08'00'

SYSTEM SETUP

SE T U P:DIGIT AL

SE T U P:

SE T U P:L AN GU AGE

SE T U P:VIDE O

Contrast, Hue, Satuation and Sharpness.

Using the Direction and OK Buttons to set or reset the picture quality such as the picture's Brightness,

Brightness, Contrast, Hue, Saturation.

Using the Direction and ENTER/OK Buttons to set or reset the picture quality such as the panel's

1. If Osd Lang (On Screen Display Language) is selected, using the Direction and ENTER/OK Button to

set the priority of the available language. (Function depends on the recording of the disc.)

priority of the available language.

language of the on screen menu.

available language or set it off.

2. If Audio Lang (Audio Language) is selected, using the Direction and ENTER/OK Buttons to set the

3. If Subtitle Lang (Subtitle Language) is selected, using the Direction and ENTER/OK Buttons to set the

priority of the

4. If Menu Lang (Menu Language) is selected, using the Direction and ENTER/OK Buttons to set the

priority of the available

If Dual Mono is selected, using the Direction and ENTER/OK Buttons to set it to Stereo, Mono L,

(Plays Left channel on all speakers), Mono R (Plays Right channel on all speakers) or Mix Mono

(Mixed Right and Left channel then plays on all speakers) as desired.

(Functions depend on the recording of the disc).

~ If set to LT/RT, the rear left and rear right channels will plays on both Left and Right Speakers.

~ If set to Stereo, the rear left channel will plays on Left Speaker; the rear right channel will play on Right

Speaker.

If Downmix is selected, using the Direction and ENTER/OK Buttons to set it to LT/RT; Stereo as desired.

PIC T U R E

AU DIO

lxy

2017.09.2

3 17:29:02

+08'00'

CARE AND MAINTENANCE

Treat the disc carefully. Handle the disc only by its edges.

Never allow your ngers to contact with the shiny, unprinted side of the disc.

● Do not attach adhesive tape, stickers, etc. to the disc label.

● Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners

to clean the disc. If necessary, use a CD cleaning kit.

● If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged(scratched).

● When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the

disc. Never wipe in circular motions.

● Discs should be stored in their cases after each use to avoid damage.

● Do not expose discs to direct sunlight, high temperatures or dust, etc. Prolonged exposure or

extreme temperatures can warp the disc.

● Do not stick or write anything on either side of the disc. Sharp writing Instruments, or the ink, may

damage the surface.

Cleaning the Unit

● To prevent re or shock hazard, disconnect your unit from the AC power source when cleaning.

● The nish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use

caution when cleaning and wiping the plastic parts.

● Mild soap and a damp cloth may be used on the front panel.

Caring for Discs

lxy

2017.09.2

3 17:29:11

+08'00'

SPECIFICATIONS

Accessories

Disc Compatibility:

DVD±R/DVD±RW/MP3/JPEG

1 x User's Manual

1 x Remote Control

DVD/ CD/CD-R/CD-RW/

1 x Car Adaptor

Power Source: Built-in Lithium-ion rechargeable battery, recharge by DC 9-12V,

(Input: 12V 2 A; Output: DC 12V 2A)

1 x Earphone

Power Source of Remote Control: DC 3V, 2 x AAA Size Batteries

1000mA

(not included)

1 x AC/DC Adaptor

lxy

2017.09.2

17:29:16

+08'00'

LECTEUR DVD PORTATIF 7 POUCES

MODÈLE : SDVD7049

LISEZ CES INSTRUCTIONS AVANT UTILISATION ET

CONSERVEZ-LES POUR RÉFÉRENCE FUTURE.

SYLVANIA est une marque déposée de OSRAM SYLVANIA INC. Utilisée sous licence.

lxy

2017.09.2

3 17:29:22

+08'00'

La page charge ...

Sylvania SDVD7049 Le manuel du propriétaire

Marque: Sylvania

Modèle: SDVD7049

Catégorie: Lecteurs DVD

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Sylvania SDVD7049 Owner's manual

Sylvania SDVD7049 Le manuel du propriétaire

Sylvania SDVD7049 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents