LG WM2050CW Le manuel du propriétaire

S big Ac [NE

USER'SGUIDE&

INSTAL[M[ONINSTRUcT[ONS

Before beginning installation, read these

instructions carefully. Thiswll simplify installation and ensure that the

washer isinstalled correctly and safely.Leavethese instructions near

the washer after installation for future reference.

[_AvADORA

TOcontact LG Electronics, 24 hours a day,

7 days a week:

1=800=243=0000

Or visit us on the Web at: us.lge.com

NQmero telef6nico de LG Electronics, las 24 horas

del dia, 7 dias a la semana:

1=800=243=0000

O visitenos en la Web en: us.lge.cem

To contact LG Electronics, 24 hours a day,

7 days a week:

1=888 =LGCANADA

Or visit us on the Web at: ca.lge.com

Pour contacter LG Electronics, 24 heures par jour,

7 jours par semaine :

1=888 =LGcANADA

Ou visitez notre site Web a.I'adresse : ca.lge.com

GU[ADE/USUARIOE

INSTRUccIONESDEINSTAi_AcION

Antes de comenzar la instalacion, lea atentamente estas instruccio-

nes.Esto simplificara la instalacion y asegurara que la lavadora esta

instalada en forma correcta y segura. Conserve estasinstrucciones

cercade la lavadora luego de lainstalacion parafuturas consultas.

IneA[avER

GUIDEDE/'UTI/ISMEUR ET

DIREcTIvESD'INSTA[[ATION

Avantde commencer ainstaller votre machine a laver,iisez at-

tentivement ces instructions, cela simpiifiera votre installation

et assurera que la machine a laver est installee correctement et

enroute securite. Conservez cesinstructions aproximite de la

machine alaver apres son installation, pour reference future.

rgodel/rgodelo/rgodele

WM2050C*

Designed specially to use only

HE(High-Efficiency) detergent

Dise_ada especificamente para usar con

el detergente tipo HE (Alta eficiencia)

Sp¢cialement conqu pour

utilisation avec un detergent haute ef-

ficacit¢ uniquement

P/No. MFL31245198

INT ODUCTION

iMPORTANT SAFETY iNSTRUCTiONS

Basic Safety Precautions .................................. 3-6

PARTS AND FEATURES

specialFeatures.....................................................7

Key Partsand Components ...................................8

iNSTALLATION iNSTRUCTiONS

Choose the Proper Location .................................. 9

Clearances ............................................................. 9

Flooring ................................................................ 10

Installations With Optional Pedestal Base

or Stacking Kit ...................................................... 10

Unpacking and Removing Shipping Bolts ........... 11

Connecting the Water Lines ................................. 12

Connecting the Drain Line .................................... 13

Leveling the Washer ............................................. 14

HOW TO USE

Sorting Wash Loads ............................................. 15

Selecting Detergent .............................................. 16

About the Dispenser ............................................. 16

Loading the Dispenser ......................................... 17

Control panel features .......................................... 18

Cycle guide ........................................................... 19

The Time and Status Display ............................... 20

Operating the Washer .......................................... 21

Cycle Setting Buttons .......................................... 22

Custom Program .................................................. 23

Load size sensing system .................................... 23

Cycle Option Buttons .......................................... 24

Special Functions ................................................. 25

CARE AND CLEANING

Regular Cleaning ............................................ 26-27

Cleaning the Washer ............................................ 27

Maintenance ................................................... 28-29

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 30

Before Calling for Service ............................... 30-32

SPECIFICATIONS/OPTIONAL ACCESSORIES

Key Dimensions and Specifications ..................... 33

Optional Accessories ........................................... 33

WARRANTY

Product Registration Information ................... 34-35

THANKYOUI

Oongratulations on your purchase

and welcome to the LG family.

Your new LG washing machine

combines the most advanced

washing technology with simple

operation and high efficiency.

By following the operating and care

instructions in this manual, your

washer will provide you with many

years of reliable service.

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on

the rating plate on the front of the washer.

2

I 0 TANTSAFETYINST UcTIONS

RSAD ALL iNSTRUCTiONS BEFORS USE

_WARNING Foryo.rsafety,theinformationinthisman.alre.stbe

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This isthe safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

_E)A_G_R: You can be killed or seriously injured if you don't immediately follow instructions.

_WARN|NG-" You can be killed or seriously injured ifyou don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how the reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

5

I PORTANTSAFETYINSTRUCTIONS

RSAD ALL iNSTRUCTiONS BEFORS USS

WARNING For your safe ,the information in this manual must be

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

4

BASIC SAFETY PRECAUTIONS

_I_WARN|_I|G= = To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other flammable

or explosive substances, as they give off vapors that

could ignite or explode.

Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash

water. These substances give off vapors that could

ignite or explode.

Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washer,

turn on all hot water faucets and let the water flow

from each for several minutes. This will release any

accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children.

Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described inthis

manual. We strongly recommend that any service be

performed by a qualified individual.

See Installation Instructions for grounding

requirements.

ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch fire.

Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

Turn off the water taps and unplug the washer if the

machine is to be left for an extended period of time,

such as during vacations.

Packaging material can be dangerous for children.

There is a risk of suffocatio!! Keep all packaging

from children.

Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord

having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate

outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in

risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance

- if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Failure to follow these warnings can cause serious injury, fi re, electrical shock or death.

I 0 TANTSAFETYINST UcTIONS

RSAD ALL iNSTRUCTiONS BEFORS USE

WARNING Foryo.rsafety,theinformationinthismanualmustbe

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR iNSTALLATiON

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for

detailed grounding procedures. Installation

instructions are packed in the washer for installer's

reference. Ifthe washer is moved to a new location,

have it checked and reinstalled by a qualified service

person. Failure to follow this warning can cause

serious injury,fire, electrical shock or death.

• Do not, under any circumstances cut of remove

the third (ground) prong from the power cord.

Failure to follow this warning can cause serious

injury, fire, electrical shock or death.

• For personal safety, this appliance must be

properly grounded. Failure to follow this warning

can cause serious injury, fire, electrical shock

or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall outlet to

minimize the possibility of electric shock hazard from

this appliance.

• This washer must be plugged into a 120VAC, 60Hz

grounded outlet. Failure to follow this warning can

cause serious injury, fire, electrical shock or death.

• Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded. Failure to follow this warning

can cause serious injury, fire, electrical shock

or death.

• Where a standard 2=prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a property

grounded 3=prong wall outlet. Failure to follow

this warning can cause serious injury, fire, electrical

shock or death.

• Do not install on carpet. Install washer on a solid

floor. Failure to follow this warning can cause serious

leak damage.

Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded

3=prong outlet. Failure to follow these warnings can

cause serious injury, fire, electrical shock or death.

• The washer should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause

a fire hazard from overheated wires.

• Never unplug your washer by pulling on the

power cord. Always grip plug firmly and pull straight

out from the outlet. Failure to follow this warning can

cause serious injury, fire, electrical shock or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure

to follow this warning can cause serious injury, fire,

electrical shock or death.

When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious

injury, fire, electrical shock or death.

The washer must be installed and electrically

grounded by a qualified service person in

accordance with local codes to prevent shock

hazard and assure stability during operation.

Washer is heavy. Two or more people may be

need to install and move the appliance. Failure to

do so can result in back or other injury

Store and install the washer where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

Do not install the washer in humid spaces to

reduce the risk of electric shock. Failure to follow

this warning can cause serious injury, fire, electrical

shock or death.

5

I PORTANTSAFETYINSTRUCTIONS

READ ALL iNSTRUCTiONS BEFORE USE

WARNING For your safety,the information in this manual must be

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR USE, CAREAND CLEANING, AND DISPOSAL

_II_WAF_II_ | _I_G== To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Unplug the washer before cleaning to avoid the

risk of electric shock.

• Never use harsh chemicals, abrasive cleaners,

or solvents to clean the washer. They will

damage the finish.

• Do not put oily or greasy rags or clothing on

top of the washer. These substances give off

vapors that could ignite the materials.

• Do not wash items that are soiled with

vegetable or cooking oil. These items may

contain some oil after laundering. Due to the

remaining oil, the fabric may smoke or catch

fire by itself.

• Disconnect this appliance from the

power supply before attempting any user

maintenance. Turning the controls to the OFF

position does not disconnect this appliance

from the power supply. Failure to follow this

warning can cause serious injury,fire, electrical

shock or death.

• Do not combine laundry products for use in 1

load unless specified on the label.

• Do not mix chlorine bleach with ammonia

or acids such as vinegar. Follow package

directions when using laundry products.

incorrect usage can produce poisonous gas-

resulting in serious injuryor death.

• Do not reach into the washer while parts are

moving. Before loading, unloading or adding

items, push in the cycle selector knob and

allow the drum to coast to a complete stop

before reaching inside. Failure to follow this

warning can cause serious injury,fire, electrical

shock or death.

• Do not allow children to play on or in the

washer. Close supervision of children is

necessary when the washer is used near

children. As children grow, teach them the

proper, safe use of all appliances.Failure to

comply with these warnings could result in

serious personal injuries.

• Destroy the carton, plastic bag and other

packing materials after the washer is

unpacked. Children might use them for play.

Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result

in serious personal injuriesor death.

• Keep laundry products out of children's reach.

To prevent personal injury, observe all warnings

on product labels. Failure to comply with these

warnings could result in serious personal injuries.

• Remove the door to the washing compartment

to avoid the danger of children or small animals

getting trapped inside before your washer is

removed from service or discarded. Failure to do

so can result in serious personal injuryor death.

6

PA TS ANDFEATU ES

SPECIAL FEATURES

DETERGENT DISPENSER DRAWER

This four-compartment drawer provides separate

dispensers for prewash and main wash detergent,

liquid bleach, and liquid fabric softener.

O EASY-ACCESS LOCKING DOOR

Extra-large door locks during operation and

features a delay to prevent the door from being

opened until the washer interior has cooled and

the water level has lowered.

ROLLER JETS

The RollerJet system enhances wash

performance while reducing fabric wear.

Integrated jets spray clothes to further improve

washing efficiency.

_) DIRECT-DRIVE MOTOR

Direct-drive motor eliminates the belt and pulleys

found on most washers to provide improved

performance and reliability while increasing

energy efficiency.

7

PARTSANDFEATU ES

KEY PARTSAND COMPONENTS

In addition to the special features and

components outlined in the Special Features

section, there are several other important

components that are referenced in this manual.

O LARGE=CAPACITY STAINLESS STEEL

DRUM

The large capacity stainless steel drum offers

extreme durability and is tilted to improve

efficiency and allow easier access for large items.

O

DISPLAY WITH LOAD SIZE iNDICATOR

The load size is set automatically based on the

weight and size of each load for optimal washing

and fabric care.

O

LEVELING FEET

Four leveling feet (two in the front and two in

the back) adjust to improve washer stability on

uneven floors.

Hot and Cold

Water Inlets

A

V DRAIN ACCESSPANEL

Provides access to the drain line and drain

pump filter.

Drain

Hose

Rear of Washer

included Accessories

Hot an_

Water Hoses

Caps (4)

(for covering

shipping bolt holes)

8

h

Tie Strap

Elbow Bracket

shipping bolts and (for securing (for securing

adjusting leveling feet) drain hose)

drain hose)

INSTALLATIONINST UcTIONS

cHOOSE THE PROPER LOcATiON

WARN|NG

• Washer is heavy! Two or more people

are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing

or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• Properly ground washer to conform with all

governing codes and ordinances. Failure to

follow this warning can cause serious injury, fire,

electrical shock, or death.

• To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to

follow this warning can cause serious injury,fire,

electrical shock, or death.

• The base opening must not be obstructed by

carpeting when the washer is installed on a

carpeted floor.

= DO not remove ground prong. Do not use

an adapter or extension cord. Plug into a

grounded 3=prong outlet. Failure to follow this

warning can cause serious injury, fire, electrical

shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of

either side of the washer.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current wiring codes and regulations.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: it is the personal responsibility and

obligation of the product owner to have a

proper outlet installed by a qualified electrician.

CLEARANCES

(54 cm)

0

IL:IZZZ__:2222221

(76,6 om) (10 om)

51 "_

(1 29.5 om)

000

1"--I 27"

(2.5 cm) (68.6 cm) (2.5 cm)

To ensure sufficient clearance for water lines and

airflow, allow minimum clearances of at least

1 in. (2.5 cm) at the sides and 4 in. (10 cm)

behind the unit. Be sure to allow for wall, door,

or floor moldings that may increase the required

clearances.

Allow at least 24 in. (61.2 cm) in front of the

washer to open the door.

9

INSTALLATIONINST UcTIONS

FLOORING

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed floor.

See the NOTE at right.

• Allowable slope under the entire washer is

1o maximum.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure. Use only an approved

accessory pedestal as described below.

NOTE: Please note that the floor must be strong

and rigid enough to support the weight of the

washer when fully loaded, without flexing or

bouncing. If your floor has too much flex in it,

you may need to reinforce it to make it more

rigid. A floor that is adequate for a top-loading

washer may not be rigid enough for a front-

loading washer, due to the difference in the spin

speed and direction. If the floor is not solid, your

washer may vibrate and you may hear and feel

the vibration throughout your house.

INSTALLATIONS WiTH OPTIONAL

PEDESTAL BASE OR STACKINGKIT

IMPORTANT: if you are installing your washer

using an optional pedestal base or stacking kit,

please refer to the instructions for your pedestal

or stacking kit before proceeding with the

installation.

Required Dimensions for Installation

With Pedestal

m

1_293/4''_1 l_4"

(75.6 cm) (10 cm)

Required Dimensions for Installation

With Stacking Kit

I_

(2.5 cm) (68.6 cm) (2.5 cm)

771/2''

(190.5 cm)

10

INSTAI_/ATIONINST UcTIONS

UNPACKING AND REMOVING SHiPPiNG BOLTS

When removing the washer from the carton

base, be sure to remove the foam tub support in

the middle of the carton base.

If you must lay the washer down to remove the

base packaging materials, always lay it carefully

on its side. Do NOT lay the washer on its front

or back.

iMPORTANT: To prevent internal damage

during transport, the washer is equipped with

4 shipping bolts and plastic retainers. These

bolts and retainers MUST be removed before

operating the washer.

• Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can

lead to permanent damage to the washer. The

cord is secured to the back of the washer with

a shipping bolt to help prevent operation with

shipping bolts in place.

Foam Tub Carton Base

Support

Shipping

Bolts

Starting with the bottom 2 shipping bolts,

use the included wrench to remove the

4 shipping bolts by turning them

counterclockwise.

Remove the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes.

NOTE: Save the bolts and retainers for

future use. To prevent damage to internal

components, the shipping bolts and

retainers must be installed when

transporting the washer.

11

INSTALLATIONINST UcTIONS

CONNECTING THE WATER LINES

• iMPORTANT: Use new hoses when installing

the washer. DONOT reuse old hoses.

• iMPORTANT: Use ONLY the inlet hoses

provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to fit or

function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent

damage to product or property will not be

covered under the terms of LG's warranty.

• Water supply pressure must be between

14.5 PSI and 116 PSi (100-800 kPa). If the

water supply pressure is more than 116 PSi, a

pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks,

and wear, and replace the hose if necessary.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

• The washer should never be installed or stored

in a location subject to freezing temperatures.

Damage to the water lines and internal

mechanisms of the washer can result, if the

washer was exposed to freezing temperatures

prior to installation, allow it to stand at room

temperature for several hours before use.

f

Water Hose

(to water inlet

on washer

Rubber Seal

Water Hose "/

(to tap)

insert a rubber seal into the threaded

fittings on each hose.

Water

Inlets

NOTE: Do not cross-thread the hose fittings.

Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the

cold water line to the blue cold water inlet on

the back of the washer. Tighten the fittings

securely.

Water Tap

Attach the hot water line to the hot water

tap. Attach the cold water line to the cold

water tap.

Tighten the fittings securely. Open the water

taps fully to check for leaks.

12

INSTAI_/ATIONINST UcTIONS

CONNEcTiNG THE DRAIN LiNE

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in flooding and property

damage.

Do not install the end of the drain hose higher

than 96 in. (244.8 cm) above the bottom of the

washer.

The drain must be installed in accordance with

any applicable local codes and regulations.

Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

Option 1: Standpipe

_._ Elbow

Bracket

Drain

Hose

Clip the end of the hose into the elbow bracket.

Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Option 2: Laundry Tub

Elbow

Bracket Laundry

Hose

J

Clip the end of the hose into the elbow bracket.

Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain

hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Option 3: Floor Drain

Drain Hose

Floor Drain _

Insert the end of the drain hose into the floor

drain. Secure the hose in place to prevent it

from moving.

15

INSTALLATIONINST UcTIONS

LEVELING THE WASHER

The drum of your new washer spins at very high

speeds, up to 1,100 RPM. To minimize vibration,

noise, and unwanted movement, the floor must

be a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the

leveling feet more than necessary can cause

the washer to vibrate.

• All four leveling feet must rest solidly on the

floor. Rock the washer gently from corner to

corner to make sure that the washer does

not rock.

If you are installing the washer on the optional

pedestal, you must use the leveling feet on

the pedestal to level the washer. The washer's

leveling feet should be fully retracted and locked

into position with the Iocknuts.

Leveling

Feet

Leveling

Feet

Position the washer in the final location,

taking special care to not pinch, strain, or

crush the water and drain lines. Place a level

across the top of the washer.

14

Raise Lower

Loosen the Iocknuts on all 4 leveling feet

until you can turn the feet with the included

wrench. Turn clockwise to raise the washer

or counterclockwise to lower it.

Tighten all 4

Iocknuts securely

Once the washer is level from side to side

and front to back, tighten all Iocknuts

securely.

Make sure that all 4 leveling feet are in firm

contact with the floor.

J

NOTE: To make sure that the washer is

properly level, run the washer with a test

load: place approximately 6 pounds of

laundry in the machine. Then, press POWER,

press RINSE+SPIN, and then press the

START/PAUSE button. See the following

sections for additional information on cycle

selection and operation.

Verify that the washer does not rock or

vibrate excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable

and retest.

0 TO USE

SORTING WASH LOADS

FaDri¢ Care LaDels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Fabric Care Labels

wash

cycle .orma, Permanent"_press/ GentlY/

wrinkle resistant delicate

H h Donot wash Donot wring

Water • Q • • • •

temperature Hot Warm Cold/cool

(50°C/120°F) (40°C/105°F) (30°C/85°F)

Bleach _ _

symbols Any bleach Only non-chlodne bleach Donot bleach

(whenneeded) (whenneeded)

Grouping Similar Items

For best results, sort clothes into loads that can

be washed with the same wash cycle.

Different fabrics have different care requirements.

Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows

recommended groupings.

Loading the washer

* Check all pockets to make sure that they

are empty. Items such as clips, matches,

pens, coins, and keys can damage both your

washer and your clothes.

* Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

. Pretreat heavily stained areas for best results.

. Combine large and small items in a load. Load

large items first.

. Large items should not be more than half of the

total washload.

. The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer should close easily.

. To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to

the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed

individually.

. Do not wash or spin waterproof clothes.

. When unloading the washer, check under the

door seal for small items.

NOTE: The front loading washer rotates the

wet laundry to wash it with less water. If you

do not see the water during washing, it is not

a problem because the laundry is sufficiently

wet.

15

OWTO USE

SELECTING DETERGENT

IMPORTANT: Your washing machine is

designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated

specifically for front-load washers and contain

suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean.

Using a regular detergent may cause oversudsing

and unsatisfactory performance.

IMPORTANT: Do not place or store laundry

products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer.

Wipe up any spills immediately. These products

can damage the finish and controls.

Designed specially to use only

HE (High-Efficiency) detergent

ABOUT THE DISPENSER

The automatic dispenser consists of four

compartments which hold:

• Liquid chlodne bleach.

Liquid fabric softener.

Liquid or powdered detergent for prewash.

Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in

their respective dispenser compartments. They

will be dispensed at the appropriate time for the

most effective cleaning.

After adding the laundry products to the

dispenser, close the dispenser drawer.

To add detergent, bleach, and fabric softener to

the automatic dispenser:

_Open the drawer.

dispenser

O Load the into the

laundry products

appropriate compartments.

O Slowly close the drawerdispenser

to

avoid early dispensing of the laundry

products,

NOTE: It is normal for a small amount of water to

remain in the dispenser compartments at the end

of the cycle,

Liquid Chlorine Liquid Fabric

Bleach Softener

Compartment Compartment

Main Wash Detergent

Compartment

Insert

Liquid

ent

_,Cup

Prewash

Detergent

Compartment

16

0 TO USE

LOADING THE DISPENSER

Prewash Detergent Compartment

Add liquid or powered detergent to this

compartment to automatically dispense when

using the Prewash option. Always use HE (High-

Efficiency) detergent with your washing machine.

• The amount of detergent added for the Prewash

option is 1/2 the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires one cup of detergent, add 1/2

cup for the Prewash option.

NOTE: If liquid detergent is to be used for the

main wash when using the pre-wash option, the

liquid detergent cup accessory must be used

in main wash dispenser to prevent the main

wash liquid detergent from being dispensed

immediately.

Main wash Detergent Compartment

This compartment holds laundry detergent

for the main wash cycle, which is added to

the load at the beginning of the cycle. Always

use HE (High-Efficiency) detergent with your

washing machine.

Always follow the manufacturer's

recommendations when adding detergent.

Using too much detergent can result in

detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

• When using liquid detergent, make sure the

liquid detergent cup and insert are in place.

Do not exceed the maximum fill line.

When using powdered detergent, remove

the insert and liquid detergent cup from the

compartment. Powdered detergent will not

dispense with the liquid detergent cup and

insert in place.

NOTE: Liquid or powdered color-safe bleach

may be added to the main wash compartment

with detergent of the same type.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach,

which will be dispensed automatically at the

proper time during the wash cycle.

Do not add powdered or liquid color-safe bleach

to this compartment.

Always follow the manufacturer's

recommendations when adding bleach. Do not

exceed the maximum fill line. Using too much

bleach can damage fabrics.

Never pour undiluted liquid chlorine bleach

directly onto the load or into the drum. Fabric

damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener,

which will be automatically dispensed during the

final rinse cycle.

Always follow the manufacturer's

recommendations when adding fabric softener.

Do not exceed the maximum fill line. Using

too much fabric softener may result in stained

clothes.

Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum fill line.

Never pour fabric softener directly onto the load

or into the drum.

Designed speciallv to use onlv

HE (High-Efficiencv) detergent

17

OWTO USE

CONTROL PANEL FEATURES

WM2050C*

,O

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn

the washer OFR

NOTE: Pressing the ON/OFF button during a

cycle will cancel that cycle and any load settings

will be lost.

O CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will be shown in the display. These

settings can be adjusted using the cycle settings

buttons anytime before starting the cycle.

O

START/PAUSE BUTTON

Press this button to START the selected cycle.

If the washer is running, use this button to PAUSE

the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE

button within 4 minutes of selecting a cycle, the

washer automatically turns off.

CUSTOM PROGRAM BUTTON

Press the CUSTOM PROGRAM button to save

and recall a customized wash cycle for future use.

You can save the Cycle, Wash/Rinse Temperature,

Spin Speed, and Soil Level settings, as well as

other cycle options.

CYCLE SETTINGSBUTTONS

Use these buttons to adjust the desired cycle

options for the selected cycle.

DELAY WASH BUTTON

Press this button to delay the start of the

wash cycle. Each press of the button

increases the delay time by one hour, up to

19 hours.

TIME AND STATUS

The display shows the settings, estimated

time remaining, options, and status

messages for your washer.

O

OPTION BUTTONS

The option buttons allow you to select ad-

ditional cycle options and will light when

selected. Certain buttons also allow you to

activate special functions by pressing and

holding the button for 3 seconds.

For detailed information about the individual

options, please see the following pages.

18

0 TO USE

CYCLE GUIDE

The cycle guide below shows the options and recommended fabric types for each cycle.

WM2050C*

BULKY/

LARGE

COTTON/

NORMAL

PERM,

PRESS

DELICATES

HANDWASH/

WOOL@

SPEED

WASH

DRAIN+

SPiN

\

Warm/Cold

Largeitems suchas Warm/Warm

blanketsand comforters Hot/Cold

Tap/Cold

Cold/Cold

Warm/Cold

Cotton,linen,towels Warm/Warm

shirts,sheets,jeans Hot/Cold

mixedloads Tap/Cold

Cold/Cold

Warm/Cold

Dressshirts/pants,

wrinkle-freeclothing, Warm/Warm

poly/cottonblend Hot/Cold

clothing,tablecloths Tap/Cold

Cold/Cold

Dressshirts/blouses

nylons,sheerorlacy

garments

Itemslabeled

"handwashable"

Cold/Cold

Warm/Cold

Warm/Warm

Tap/Cold

Warm/Cold

Warm/Warm

Tap/Cold

Cold/Cold

Hot/Cold

Lightlysoiledclothing Tap/Cold

andsmallloads

Cold/Cold

Warm/Cold

Warm/Warm

Drain,SpinOnly

Low(---) Normal

Medium(--) Heavy

NoSpin(.) Light

High(:)

ExtraHigh(_)

NoSpin(,,)

Low(---)

Medium(i)

Medium(--)

High(:)

NoSpin(.)

Low(---)

Medium(i)

NoSpin(o)

Low(---)

LOW(---)

NoSpin(.)

ExtraHigh(_)

NoSpin(,,)

Low(---)

Medium(--)

High(_---)

High(:)

ExtraHigh(----_)

NoSpin(.)

Low(---)

Medium(--)

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Light

Normal

Heavy

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is

available with every cycle.

/

19

0 TO USE

THE TIME AND STATUSDISPLAY

The time and status display shows the cycle progress and estimated time remaining, cycle

options, and other status messages for your washer.

COLD

MEDIUM

O ESTIMATED TiME REMAiNiNG

When the START/PAUSE button is pressed, the

washer automatically detects the wash load

(weight) and optimizes the washing time, based

on the selected cycle and options. The display

will then indicate the estimated time remaining

for the selected wash cycle.

NOTE: The cycle time displayed may appear

much longer than that of a top-loading washer.

The displayed time is for the complete cycle,

rather than just the agitation portion of the cycle,

as is typically shown on a top-loading washer.

CYCLE COMPLETION iNDiCATOR

This portion of the display shows which stage

of the wash cycle is currently underway (LOAD

SENSING, WASH, RINSE or SPIN).

O

DOOR LOCK INDICATOR

indicates that the door is locked. The washer

door will lock while the washer is operating. The

door can be unlocked by pressing the START/

PAUSE button to stop the washer.

NOTE: If the temperature in the washer is too

high, the door cannot be unlocked until the

washer has cooled. If the water level is too high,

select the DRAIN & SPIN cycle to drain excess

water. Do not try to force open the door.

DELAY WASH INDICATOR

This indicator shows that the washer has been

set for DELAY WASH. The washer will start

automatically after the set delay time

has passed.

AUTOMATIC LOAD SIZE SENSING

At the beginning of the cycle, the washer tumbles

the load and detects the weight of the clothes.

The display will indicate the approximate load

size in the LOAD SIZE display. This allows you

to adjust the amount of detergent and other

additives for best results and improved efficiency.

20

La page est en cours de chargement...

LG WM2050CW Le manuel du propriétaire

Ce manuel convient également à

LG WM2050CW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents