Eizo FDF2304W-IP Le manuel du propriétaire

Color LCD Monitor

Instruction Manual

Important

Please read this Instruction Manual, the Installation Manual and the

Setup Manual carefully to familiarize yourself with safe and effective

usage.

• The latest manual is available for download from our web site:

http://www.eizoglobal.com

2

About this manual

Setup Manual

Describes precautions and setup processes from network camera

connection to camera image display.

Instruction Manual

(this manual)

Describes operation of network cameras and live image screen

menus, etc.

Installation Manual

Describes network camera registration and function setup, monitor

system setup, etc.

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

3

Displays/hides the menu of the live image display screen.

Turns Smart Functions

*1

on or off.

*1 Improves the image visibility.

Turns the sequential display

*2

of camera images on or off.

*2 Changes over the displayed page at a set interval.

Changes over the page of camera images to display on the

monitor.

Changes the monitor screen layout.

Each time the button is pressed, the layout changes in the

following order: 1 Screen → 4 Screens → 9 Screens →

16 Screens → 8 Screens → 1 Screen.

(Live image screen)

Menu Operation details

Operating the monitor display screen

Display mode menu

/

Remote control

button

Camera control menu

Operation Guide

<Menu Operations on the

Live Image Screen>

The menu on the live image screen is operated using the remote control.

(For details, see “Chapter 4 Operating the System” (page 11).)

4

● Before operation

Log in to the system with a user level that has privileges for controlling network cameras.

(Please contact your system administrator for user information.)

1. Select (Login) with or and press .

2. Enter a username and a password.

(1) Select the text field with or and press .

(2) Enter respective values with to and press .

3. Select “Login” with or and press .

4. Press .

Procedure

1. Select “Camera Control” or and press .

2. Select the network camera to operate.

(1) Check that “Camera” is selected and press .

(2) Select the network camera or and press .

(3) Press .

3. Select the menu frame that includes the function you wish to

use with or and press .

4. Operate the functions.

* Depending on the type of the network camera

you are using, some functions may not be

available.

Zoom

Adjusts the network camera display magnification.

Press / .

Each time the button is pressed,

the camera zooms out/in.

Controlling Network Cameras

Brightness

Adjusts the brightness of the network camera.

Select a setting button with or and press .

Each time the button is pressed, the

display becomes darker/brighter.

Returns to the default setting.

*1

Preset

Moves the camera orientation to the position

registered in advance.

(1) Select from the list box and press .

(2) Select the preset number with

or and press

.

Moves the camera to the home position.

Select the setting button

or and

press .

Focus

Adjusts the network camera focus.

Each time the button is pressed, the

focus point moves closer/farther away

.*2

Adjusts automatically.*

3

Position

Adjusts the filming position of the network camera.

Press .

Shooting position moves in the

horizontal/vertical direction (pan/tilt).

*1 Cannot be set if using a network camera compatible with the

"ONVIF" protocol.

*2 If using a network camera compatible with the "ONVIF" protocol, the

mode is switched to manual adjustment mode.

*3 If using a network camera compatible with the "ONVIF" protocol, the

mode is switched to automatic adjustment mode.

5

Notice for this monitor

Cleaning

Attention

• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet

or panel, and also quality deterioration of the image.

• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.

Note

• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.

The stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor

according to the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

6

CONTENTS

Operation Guide <Menu Operations on the

Live Image Screen> .......................... 3

Notice for this monitor ......................................... 5

Cleaning .................................................................... 5

To use the monitor comfortably ............................. 5

CONTENTS ............................................................. 6

Chapter 1 Product overview .............................. 7

1-1. SystemConguration .................................. 7

Chapter 2 Controls and Functions ................... 8

2-1. Monitor ........................................................... 8

2-2. Remote Control ............................................. 9

Chapter 3 Turning On/Off the Power .............. 10

●

To turn on the power ......................................10

●

To turn off the power ......................................10

Chapter 4 Operating the System .................... 11

4-1. Live Image Screen .......................................11

●

Basic menu operations...................................11

4-2. Changing Over Screen Layout and

Displayed Pages...........................................14

●

To change over the screen layout ..................14

●

To change over the page displayed on

the screen.......................................................15

4-3. Turning Smart Functions On/Off ................16

4-4. Controlling Network Cameras ....................16

●

Before operation .............................................16

●

To Operate network cameras .........................17

4-5. Adjusting Screen Brightness .....................18

4-6. To switch among input signals ..................18

Chapter 5 Troubleshooting .............................. 19

5-1. No picture .....................................................19

5-2. Imaging problems ........................................19

5-3. Other problems ........................................... 20

Appendix .............................................................. 21

Trademark ................................................................21

License / Copyright ................................................ 22

FCC Declaration of Conformity ......................... 23

LIMITED WARRANTY .......................................... 24

Recycling Information ........................................ 33

7

Chapter 1 Product overview

This color LCD monitor can display images from up to 16 network cameras

*1

.

*1 A type of camera which converts images into network signals and transmits the signals.

1-1. SystemConguration

FDF2304W-IP

HDMI

Ethernet

Network camera

*1

Network hub

HDMI device

*2

(Network video recorder etc.)

*1 Up to 16 network cameras can be registered.

*2 Use an HDMI device (e.g. network video recorder) if necessary.

8

Chapter 2 Controls and Functions

2-1. Monitor

10

11

8 975 6

1 2 3 4

1. Remote control detector Receives signals from the remote control.

2.

button Switches input signals for display.

3.

button Turns the power on or off.

4. Power Indicator

Indicates the monitor’s operation status.

Blue: Operating

Flashing blue: Shutting off the system

Red: Power off (With “Quick Start” set to “On”

*1

)

OFF: Power off (With “Quick Start” set to “Off”

*1

)

5. USB downstream port Connects a USB mouse or storage devices such as a USB ash drive.

*2

6. LAN port

Connects the network cable.

a b

a) Link LED Green: Network connection established.

OFF: Network connection disabled.

b) Status LED Flashing orange: Data transfer is in progress.

7. HDMI connector Connects external devices that support HDMI.

8. Power connector Connects the power cord.

9. Main power switch

Turns the main power on or off.

| : On O : Off

10. Security lock slot Complies with Kensington’s MicroSaver security system.

11. Stand

*3

Used to adjust the angle of the monitor screen.

*1 The power-off status can be set with “Quick Start”. For details, refer to the Installation Manual.

*2 Other USB devices (such as USB keyboards or USB hubs) cannot be connected.

*3 An optional arm (or an optional stand) can be attached by removing the stand section. For details, refer to the

Setup Manual.

9

Chapter 2 Controls and Functions

2-2. Remote Control

7

2

4

11

13

6

1

3

10

12

9

5

8

1.

Switches input signals for display.

2.

Turns the power on or off.

3.

Used to display/exit the monitor’s Adjustment menu.

4.

/

Adjusts the brightness of the monitor screen.

5. Number Buttons

(

to ) /

Used to enter numbers and letters.

6. /

Adjusts the network camera display magnication.

7.

/ / / ,

Used to set and control (pan/tilt) network cameras, and congure system settings of

the monitor.

8.

Returns to the previous menu status in menu operation.

9.

Changes the monitor screen layout.

Each time the button is pressed, the layout changes in the following order:

1 Screen → 4 Screens → 9 Screens → 16 Screens → 8 Screens → 1 Screen.

10.

Displays/hides the menu of the live image screen.

11.

Turns Smart Functions on or off.

12.

Turns the sequential display of camera images on or off.

13.

/

Changes over the page of camera images to display on the monitor.

Attention

• Use the remote control within the range illustrated in

the diagram below.

5m

20°

7m

5m

30°

7m

5m

• When installing multiple monitors, leave sufcient space between each monitor so that only the intended monitor will be

operated by the remote control. Otherwise, all monitors that receive the remote control signal will operate accordingly.

10

Chapter 3 Turning On/Off the Power

●

To turn on the power

1.

Turn on the main power switch on the back of the monitor.

The main power switch is turned on when factory default settings are congured.

2.

Press on the front of the monitor or on the remote control.

The power indicator lights up blue and the live image screen is displayed.

(For details on the live image screen, see “4-1. Live Image Screen” (page 11).)

Attention

• By default, it takes approximately one minute for the live image screen to be displayed after the power is turned

on. (A rotating bar indicating startup is displayed.)

• Do not turn off the monitor during startup.

Note

• The time required to display the live image screen can be reduced (Quick Start) by changing the power-off status.

For details, refer to the Installation Manual.

●

To turn off the power

1.

Press on the front of the monitor or on the remote control.

Attention

• The power indicator ashes blue while the system is shutting down.

• The power-off status differs depending on the “Quick Start” setting. For details, refer to the Installation Manual.

- When set to “On”: Part of the system remains running. (Power Indicator: Red)

- When set to “Off”: The system is shut down completely (default setting). (Power Indicator: OFF)

• When turning off the main power of the monitor, follow the procedure below.

1. If “Quick Start” is set to “On”, change the setting to “Off”.

2. Press

on the front of the monitor or on the remote control to turn off the power.

The system is shut down and the power indicator turns off.

3. Turn off the main power switch.

• Turning off the main power of the monitor before the system completely shuts down may cause equipment

damage.

11

Chapter 4 Operating the System

4-1. Live Image Screen

The live image screen is displayed when the monitor is turned on.

There are two states to the live image screen:

• Camera images and the menu are displayed.

• Only the camera images are displayed.

Live image screen

(camera images and menu)

Live image screen

(camera images only)

Press

on the

remote control to change

over the display.

Note

• You can also operate the live image screen from your Web browser. For information on operation from a Web

browser, refer to the Installation Manual.

●

Basic menu operations

The menu is used for operation and setting of network cameras and the monitor.

The menu is operated using the remote control or mouse.

Network camera image display area

- When no camera is registered, a “Not registered ” message is displayed.

- When an input signal is not supported, a “Communication Error” message is

displayed.

Message display area

(Error messages such as on camera operations are displayed.)

Current

time

(1)

(2)

12

Chapter 4 Operating the System

Note

• When using a USB mouse to operate the menu

- Connect the mouse to the USB downstream port at the back of the monitor.

- To enter characters, click “Keyboard” on the character entry screen. Then click the keys on the displayed

keyboard to enter characters.

(1) Display mode menu

The display mode menu is used for operations on camera images which are displayed on the monitor.

Operation method

Press a function button (

, , , , , ) which corresponds to a

menu item.

Note

• Operations using function buttons are valid even when the menu is not displayed.

(2)

System setup menu / Camera control menu

The system settings menu is used for logging into and conguring the system.

The camera control menu is used for controlling network cameras from the monitor.

Operation method

To select an item

Press the

/ / / /buttons.

Toconrmaselecteditem

Press .

To change a setting

• With setting buttons Press

. (Excluding zoom in/out and position adjustment)

• With list box 1. Press

.

An option list is displayed.

2. Select the setting with or .

3. Press

.

To return to the previous menu level

Press

.

Note

• When canceling a setting change in process, press .

13

Chapter 4 Operating the System

To enter characters

1. Press .

The text eld is highlighted in green.

2. Press the number buttons ( to ).

Press a button consecutively to change over to the character next in order. For the order of character entry,

refer to the table shown below.

Button Input characters

0 - _ : . / (space)

1

a b c A B C 2

d e f D E F 3

g h i G H I 4

j k l J K L 5

m n o M N O 6

p q r s P Q R S 7

t u v T U V 8

w x y z W X Y Z 9

To enter a new character, press

.

To delete a character, press

.

3. Press .

Note

• Entering network addresses

Network address text boxes are separated by [.] (a period mark).

- When a three-digit number is entered, the cursor automatically moves to the next entry position.

- When entering a two-digit or one-digit number, press

to move to the next entry position.

- When using a mouse, enter [.] (a period mark) to move to the next entry position.

Attention

• The operable range of the menu differs according to the level of the user accessing this product.

There are three user levels: “LIVE”, “CAMERA CONTROL” and “ADMIN”. The range of operation for each level is

shown below.

(√: Operable, -: Inoperable)

Operation

Level

Display mode menu

System setup menu

Camera control menu

Login operation System settings

LIVE √ √ - -

CAMERA CONTROL √ √ - √

ADMIN √ √ √ √

• When the power is turned on and after logoff, the user level is “LIVE”.

• For information on setting user levels, refer to the Installation Manual.

14

Chapter 4 Operating the System

4-2. Changing Over Screen Layout and Displayed Pages

●

To change over the screen layout

Change the number of camera images displayed on one screen.

Procedure

1. Press

on the remote control.

Each time the button is pressed, the screen layout changes over.

1 Screen 4 Screens

8 Screens 16 Screens

9 Screens

Note

• Select a network camera, and then press on the remote control. The selected camera image is

displayed as single-image display.

• If you select a network camera and use the mouse to change over the screen layout, the display page

switches to that of the selected camera image.

• You can select the network camera that you want to operate by pressing the number buttons on the remote

control.

• The position at which images are displayed can also be changed. For details, refer to the Installation Manual.

15

Chapter 4 Operating the System

●

To change over the page displayed on the screen

Except for when the screen layout is 16 Screens, camera images are displayed by changing over

pages.

Pages can be changed over either manually or automatically at a set interval (sequential display).

Changing pages manually

Procedure

1. Press

or on the remote control.

Each time the button is pressed, the page displayed on the screen changes over.

Example: 4 Screens layout

Camera 1 Camera 2

Camera 3 Camera 4

Camera 5 Camera 6

Camera 7 Camera 8

Camera 13 Camera 14

Camera 15 Camera 16

Camera 9 Camera 10

Camera 11 Camera 12

Changing pages automatically (Sequential display)

Procedure

1. Press

on the remote control.

Pages displayed on the screen are changed over automatically at a specied interval.

Note

• The interval for page changeover can be changed (default setting: 5 sec.). For information on how to change

the display interval, refer to the Installation Manual.

• To stop sequential display, press

again.

Attention

• During sequential display, camera control is disabled and the setting screen cannot be displayed. The

sequential display must be stopped in order to operate cameras or display the setting screen. For information

on how to display the setting screen, refer to the Installation Manual.

16

Chapter 4 Operating the System

4-3. Turning Smart Functions On/Off

Enable or disable settings of Smart Functions. Using Smart Functions improves the camera image

visibility.

Procedure

1. Press

on the remote control.

Each time the button is pressed, Smart Functions are turned on or off.

Note

• For information on how to congure Smart Functions, refer to the Installation Manual.

4-4. Controlling Network Cameras

●

Before operation

Network camera control is allowed only when the level of the user accessing this product is

“CAMERA CONTROL” or “ADMIN”.

Be sure to log in to the system with a user account of either of these levels.

Procedure

1. Select

(Login) under “System”.

The login screen is displayed.

1

2

3

2. Enter a username and a password.

3. Select “Login”.

The display returns to the live image screen.

4. Press on the remote control.

The system frame is selected (highlighted in green).

Note

• For information on how to enter characters, see “To enter characters” (page 13).

• The following user information is set by default:

- Username: “admin”

- Password: “admin”

- User Level: “ADMIN”

• For information on how to congure users, refer to the Installation Manual.

• It is recommended that you log out after completing operations, so as to prevent a third party from operating

the camera or altering the settings.

Attention

• When the monitor power is turned off while the user is logged in, the user is logged out from the system

automatically. In such a case, you will also be logged out from the web browser.

17

Chapter 4 Operating the System

●

To Operate network cameras

Procedure

1. Select “Camera Control”.

2. Select the network camera to operate at “Camera”.

The line of the frame where the selected network camera’s image is displayed becomes thick.

3. Select the menu frame (see the gure below) that includes the operation function you wish to use.

1

2

Menu frame

- Brightness

- Preset

- Focus

3

Menu frame

- Zoom

- Position

3

4. Operate the functions.

Attention

• Depending on the type of the network camera you are using, some functions may not be available.

Brightness / Preset / Focus

Function Detail

Brightness Adjusts the brightness of the network camera.

1. Select the setting button and press

.

:

Each time is pressed, the image becomes darker.

:

Returns the brightness to the default setting.*

1

:

Each time is pressed, the image becomes brighter.

Preset Moves the camera orientation to the position registered in advance.

1. Select the “Preset” list box and press

.

2. Select the preset number with

or and press .

Note

• For information on registering a preset position, refer to the Installation Manual.

• To move the network camera orientation to the home position, select .

Focus Adjusts the network camera focus.

1. Select the setting button and press

.

:

Each time is pressed, the focus point moves closer.*

2

:

Focuses automatically.*

3

:

Each time is pressed, the focus point moves farther away.*

2

*1 Cannot be set if using a network camera compatible with the “ONVIF” protocol.

*2 If using a network camera compatible with the “ONVIF” protocol, the mode is switched to manual

adjustment mode.

*3 If using a network camera compatible with the “ONVIF” protocol, the mode is switched to automatic

adjustment mode.

18

Chapter 4 Operating the System

Zoom / Position

Function Detail

Zoom Adjusts the network camera display magnication.

1. Press

/ .

:

Zooms out each time is pressed.

:

Zooms in each time is pressed.

Position Adjusts the shooting position of the network camera.

1. Press

/ / / .

:

Adjusts the horizontal position (pan).

:

Adjusts the vertical position (tilt).

Note

• When operating with a USB mouse, the network camera position can be adjusted automatically by clicking

on a position in the image where you wish to set as the center of the image display (only when Panasonic

network camera is equipped with pan, tilt and zoom functions).

4-5. Adjusting Screen Brightness

Adjust the brightness of the monitor screen by changing the brightness of the backlight (light source at

the back of the LCD panel).

Adjustable range

0 to 100

Procedure

1. Press

or on the remote control.

The brightness adjustment menu is displayed.

2. Set the brightness with or .

The menu disappears automatically after approximately ve seconds.

4-6. To switch among input signals

Press on the remote control to change over the input signal.

When the signal is switched, the active input port name appears at the top right corner of the screen.

Note

• on the monitor also can change the input.

19

Chapter 5 Troubleshooting

If a problem still remains after applying the suggested remedies, contact your local EIZO representative.

5-1. No picture

Problem Possible cause and remedy

1. No picture

• Power indicator does not light.

• Check whether the power cord is connected properly.

• Turn the main power switch on.

• Press

on the front of the monitor or on the

remote control.

• Turn off the main power, and then turn it on again a few

minutes later.

• Power indicator is lighting blue. • Adjust the screen brightness. (For details, refer to the

Setup Manual.).

• Power indicator is lighting blue. (for HDMI

input)

• Check whether the HDMI cable is connected properly.

• Check whether the connected device is turned on.

• Pull out the HDMI cable and connect it again. (For details,

refer to the Setup Manual.)

5-2. Imaging problems

Problem Possible cause and remedy

1. The screen is too bright or too dark. • Adjust the screen brightness. (For details, refer to the

Setup Manual.). (The LCD monitor backlight has a limited

life span. When the screen becomes dark or begins to

icker, contact your local EIZO representative.)

2. Afterimages appear. • Afterimages are particular to LCD monitors. Avoid

displaying the same image for a long time.

3. Green/red/blue/white dots or defective

dots remain on the screen.

• This is due to LCD panel characteristics and is not a

failure.

4. Interference patterns or Pressure marks

remain on the LCD panel

• Switch to the HDMI port and try displaying a white or black

image on full screen. The symptom may disappear.

20

Chapter 5 Troubleshooting

5-3. Other problems

Problem Possible cause and remedy

1. Operation buttons on the front of the

monitor do not work.

• Check whether the operation lock function is active

(For information on how to release the lock, refer to the

Installation Manual).

2. Buttons on the remote control do not work. • Check whether the remote control is pointed to the signal

receiving part.

• Check for obstacles between the remote control and the

signal receiving part.

• Batteries are dead.

• Check whether batteries are inserted correctly.

3. The mouse does not work. • Check whether the USB cable is connected properly.

• Pull out the USB cable and connect it again.

• Check whether the mouse is directly connected to the

monitor.

4. Remote control or mouse responses lag. • Reduce the resolution and/or bit rate set for the network

camera (For details, refer to the Installation Manual.).

5. Network camera cannot be operated. • The system is not logged in by a user with a camera

operable level (For details, refer to the Installation

Manual.).

• Network camera is inoperable during sequential display

(For details, refer to the Installation Manual.).

6. USBashdriveisnotrecognized. • Check whether the USB ash drive is connected properly.

• Take out the USB ash drive and insert it again.

• Check whether the USB ash drive is directly connected

to the monitor.

La page charge ...

Eizo FDF2304W-IP Le manuel du propriétaire

Eizo FDF2304W-IP Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents