Sun Microsystems WDZF Manuel utilisateur

User's Guide

http://www.sun.comhttp://www.sun.com

Sun Microsystems, Inc.

24-inch LCD Flat Panel Monitor

Sun Part No. 875-4056-10

24-inch LCD Flat Panel Monitor

WDZF

Content

1. Safety Instructions .......................................

Notation ..........................................................

Power ...............................................................

Installation .......................................................

Cleaning...... .........................................................

Other ...............................................................

China RoHS .....................................................

2. Introduction .................................................

Unpacking ........................................................

Front .................................................................

Rear ..................................................................

3. Setup ...........................................................

Connecting Your Monitor ..................................

Installing VESA compliant mounting .................

4. On-Screen Display ......................................

5. Troubleshooting .........................................

Check List ........................................................

Self-Test Feature Check ..................................

6. Specification ...............................................

General .............................................................

Preset Timing Modes .......................................

7. Information .................................................

Authority ...........................................................

Safety Instructions - I

Safety Instructions

Notation

Please read the following safety instructions as they are designed to

prevent damage to property and harm to the user.

Failure to follow directions noted by this symbol could result in bodily harm or

damage to equipment.

Prohibited Important to read and understand at all

times

Do not disassemble Disconnect the plug from the outlet

Do not touch

Warning / Caution

Notation Conventions

Safety Instructions - II

Safety Instructions

Power

When you do not use your computer for long periods of time, set your computer to DPM

(Display Power Management).

Installation

Do not cover the vents on the monitor cabinet.

Improper ventilation may cause overheating.

Cleaning

To clean the surface of the LCD, wipe either with a soft, dry cloth or a cloth slightly damped

with water. No not use any chemicals.

To clean the monitor case, wipe with a slightly moistened, soft fabric.

Safety Instructions - III

Safety Instructions

Other

Do not remove cover (or back). No user serviceable parts inside.

Refer servicing to qualified service personnel.

If your monitor does not operate normally or if there are

any unusual sounds or smells coming from it - unplug it immediately

and contact an authorized dealer.

Never insert anything metallic into the monitor openings.

Safety Instructions - IV

Safety Instructions

China RoHS

铅（Pb）

Lead 汞（Hg）

Mercury 镉（Cd）

Cadmium

六价铬（Cr6+）

Hexavalent

Chromium

多溴联苯（PBB）

Polybrominated

biphenyls

多溴二苯醚（PBDE）

Polybrominated

diphenylethers

液晶显示屏

LCD DISPLAY O X O O O O

液晶显示屏灯管

Backlight lamps O X O O O O

电路板组件

Circuit cards O O O O O O

缆绳

Cables O O O O O O

封入物

Enclosure O O O O O O

O：表示该部件的所有均质材料中此有毒或有害物质的含量均低于 SJ/T 11363-2006 中的限制要求。

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T

11363-2006.

X：表示该部件所使用的均质材料中至少有一种此有毒或有害物质的含量高于 SJ/T 11363-2006 中的限制要求。

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit

requirement in SJ/T 11363-2006.

液晶显示器

LCD Monitor

零部件名稱

Part Name

有毒有害物质或元素

Tozic or Hazardous Substances and Elements

User’s Manual - 1

Introduction

Unpacking

Please make sure the following items are included

with your monitor. If any items are missing, contact

your dealer.

Monitor and Stand

Signal cable -HD-15

Signal cable - DVI

Signal cable - USB2.0

Getting Started Guide

User’s Manual - 2

Introduction

Front

Press the MENU button ( ) to display the OSD (On Screen Display) menu on the screen.

1. There are a total of 6 OSD submenus divided by categories. Select the desired submenu

by pressing the OSD button < or > ( and ).

2. Press the OSD button MENU ( ) to activate the selected function or associated

submenu.

3. If you selected submenu, now select the sub-function you want by using < or >

( and )

4. Set the desired value using the OSD button < or > ( and )

5. The current settings are automatically saved when you return to the previous level or exit

the OSD menu. Repeat steps 2–5 to make further adjustments as needed.

6. The OSD menu automatically disappears if no changes are made for more than 45 seconds

(default setting). The current settings will be saved. You can close it manually by pressing

the button SOURCE ( ).

7. Use this button to turn the monitor on and off.( )

8. This light glows green during normal operation and goes amber during power saving.( )

Source

User’s Manual - 3

Introduction

Rear

1. Power Port Connect the power cord for your monitor to the Power Port on the

back of the monitor.

2. DVI Port Connect the DVI Cable to the DVI Port on the back of your Monitor.

3. HD-15 Port Connect the signal cable to the 15-pin, HD-15 connector on the back

of your monitor.

a. Locking Port For connecting Kensington compatible security devices.

Note: See Connecting Your Monitor for further information regarding cable connections.

The monitor features four USB ports (one upstream and four downstream). 4. USB Port

If your monitor will not be used for a long period of time, it is recommended

to switch off.

5. Main Power Switch

21 4 5

3

215 4 3

a

User’s Manual - 4

Setup

Connecting Your Monitor

1. Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

2. Using the HD-15 (Analog) connector on the video card.

Connect the signal cable to the 15-pin, HD-15 connector on the back of your monitor.

3. Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

5. Turn on your computer and monitor. If your monitor displays an image, installation is

complete.

If you properly connect your monitor using the DVI connector but get a blank screen, push the SOURCE

to see if the monitor status is set to analog.

Rear of monitor

Rear of computer

The monitor features four USB2.0 ports (one upstream and four downstream). Connect the

USB cable to USB port on your system and USB upstream port on your monitor.

4.

DVI cable

VGA cable

USB 2 . 0 cable

button

PPoowweerrccoorrdd

(not included)(not included)

Analog cable (HD-15)

User’s Manual - 5

Setup

Installing alternate mounts for the monitor

1. Turn off your monitor and unplug its power cord.

2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the

screen.

3. Remove the four screws circled in blue in the above diagram and then remove the cover

plate.

(3rd party mounts are available for this monitor via the

VESA-compliant mounting configuration.)

User’s Manual - 6

On-Screen Display

1.

Use this button for source adjustment direct access,

when the menu system is not active.

2. Use this button to exit the active menu or the OSD (On-Screen Display).

3.

These buttons allow you to highlight and adjust items in the menu.

4.

Use this button to open the OSD and activate a highlighted menu item.

User’s Manual - 7

On-Screen Display

OSD How to adjust

Brightness/Gain/Size (Gain not available in DVI digital mode)

Brightness/Gain/Size

Image Control (not available in DVI digital mode)

Image Control

Brightness: Adjusts brightness by using the

buttons < or > ( and ).

Gain: Adjusts screen gain by using the

buttons < or > ( and ).

Size: Adjusts screen size by using the

buttons < or > ( and ).

Auto Adjustment: Automatically selects the optimal

settings for image parameters

(image position, phase, etc.) by

using the button MENU

( ).

H. Position: Controls the picture’s horizontal position.

V. Position: Controls the picture’s vertical position.

Clock: Adjusts the internal clock frequency for

the analog video input.

Phase: Adjusts the internal clock phase for fine-tuning

the displayed image to the analog video input.

Sharpness: Controls image sharpness (only for

resolutions less than 1280 × 1024 pixels).

BRIGHTNESS

BRIGHTNESS / GAIN

GAIN

SIZE

ADJUST ENTER EXIT

HD15

SRC

AUTO ADJUSTMENT

IMAGE CONTROL

H. POSITION

V. POSITION

CLOCK

PHASE

SHARPNESS

ADJUST ENTER EXIT

HD15

SRC

4

User’s Manual - 8

On-Screen Display

OSD How to adjust

Color

OSD Control

Color

OSD Control

This menu lets you select a preset color temperature

(Default, COOL, sRGB, and CUSTOM COLOR) by pressing

the OSD buttons< or > ( and ). Changes to the color

temperature take immediate effect on screen. If you wish to

set individual color values, select the Custom Color option.

Then press the MENU button ( ) to select the red, green

and blue settings and set the desired value using the OSD

buttons < or > ( and ). The current settings are

automatically saved when you return to the previous level or

exit the OSD menu.

H. OSD Position: Controls the OSD menu’s horizontal

position.

V. OSD Position: Controls the OSD menu’s vertical position.

OSD Timeout: Determines how long (in seconds) the OSD

menu waits before closing automatically after

no action has been performed.

DEFAULT

COLOR

COOL

SRGB

CUSTOM COLOR

ADJUST ENTER EXIT

HD15

SRC

H. OSD POSITION

OSD CONTROL

V. OSD POSITION

OSD TIMEOUT

ADJUST ENTER EXIT

HD15

SRC

4

User’s Manual - 9

On-Screen Display

OSD How to adjust

Other

Reset

Language: English, French, German, Italian, Netherlands,

Polish, Russian, Spanish .

Input: Controls the selection of the input signal. The monitor

allows you to make the following connections: analog

graphics card via the 15-pin mini HD-15 interface,

digital graphics card via the 24-pin DVI-D interface.

Information: There is an optional OSD window (on/off) that

displays the newly adjusted screen resolution

settings.

Autoswitch: This option allows you to decide if the auto

adjustment function should take effect after

each change to the monitor’s resolution.

Yes: Resets the monitor to original factory settings.

No: Exits the reset function without changing the settings.

LANGUAGE

OTHER

INPUT

INFORMATION

AUTO SWITCH

64.2KHz / 60.2Hz +/+

1280X1024 108MHZ

ADJUST ENTER EXIT

HD15

SRC

YES

RESET

NO

HD15

SRC

User’s Manual - 10

Troubleshooting

Check List

Note Before calling for service, check the information in this section to see if you can

remedy any problems yourself.

Symptom Check List Solutions

No images on the

screen. I cannot turn

on the monitor.

Is the power cord connected

properly?

Is the main power switch on

the back of the monitor in the

on position?

Switch the main power switch to On position.

No

Signal, Check Signal

Cable" on the screen?

Check the power cord connection.

Check the signal cable connection.

OUT OF

FREQUENCY

screen?

You may see this message when the signal

from the video card exceeds the maximum

resolution and frequency that the monitor

can properly handle.

Adjust the maximum resolution and

frequency that the monitor can properly

handle.

screen. Is the power indicator

on the monitor AMBER?

The monitor is in PowerSaver mode.

Press a key on the keyboard to activate the

monitor and restore the image on the

screen.

If there is still no image, check input source

Then press any key on the keyboard again

to activate the monitor and restore the

image on the screen.

cable? You may get a blank screen if you boot the system

before you connect the DVI cable, or disconnect

and then reconnect the DVI cable while the system

is running, as certain graphic cards may not send

out video signals with no monitor attached.

Connect the DVI cable and then reset the video.

User’s Manual - 11

Troubleshooting

Check List

Check the following items if there is trouble with the monitor.

1. Check if the power cord and the video cable(s) are properly connected to the computer.

2. For analog video, do not exceed 75Hz when using the maximum resolution.

For digital video, do not exceed 75Hz for any resolution over 1280x1024.

Any resolution higher than that is limited to 60Hz refresh frequency.

Note: If problems repeatedly occur, contact an authorized service center.

Symptom Check List Solutions

The screen shows

strange colors or just

black and white.

Does the screen display

improper colors? Check the signal cable connection.

Make sure the computer's video card is fully

inserted in its slot.

Has the computer's video

card been set properly?

Set the video card to the correct resolution.

User’s Manual - 12

Troubleshooting

Self-Test Feature Check

Your monitor provides a self test feature via a status light and on-screen warning message

that allows you to check whether your monitor is functioning properly.

2.

3.

4.

1.

Black Screen

Power indicator is off

Make sure the power cable is connected properly (see section “Connecting”).

Make sure that the monitor was turned on using the power switch (including power switch on the rear).

Power indicator lights amber

Perhaps a power saving mode is active? Press any key on your keyboard or click the mouse button.

Power indicator lights green

Indicates normal operation of the monitor.

“No Signal!” message

Is the signal cable connected to the monitor and the computer’s graphics port?

(see section “Connecting Your Monitor”)

Display Problems

Image is displaced to the left/right or to the top/bottom

If the image appears normal but off-center for the analog video input, you can adjust it using the OSD

function under "Image Control" called "Auto Adjustment". There are no such adjustments for digital

video (DVI-D) as they are not needed.

105 Watts maximum (90 Watts typical; includes 20 Watts of USB power)

User’s Manual - 13

Specification

General

Model Name WDZF

LCDPanel

Size 24.1 inch diagonal

Display area 518.4mm (20.4 inch) (H) x 324.0mm (12.7 inch) (V)

Pixel Pitch 0.270mm (0.01063 inch) (H) x 0.270mm (0.01063 inch) (V)

Type AM-TFT-LCD

Synchronization

Horizontal 30 ~ 94 kHz (Analog), 30~82kHz (Digital)

Vertical 56 ~ 76 Hz

Display Colors

16,777,216

Resolution

Optimum resolution 1920 x 1200@60Hz (Digital and Analog)

Maximum resolution 1920 x 1200@75Hz (Analog only, but 1920 x 1200@60Hz is preferred)

Input Signal, Terminated

RGB Analog , DVI Compliant Digital RGB.

Separate H/V sync,TTL level positive or negative

Maximum Pixel Clock

203 MHz (Analog), 165 MHz (Digital)

Power Supply

Signal Cable

15pin-to-15pin HD-15 cable, detachable, 1.8m

DVI-D to DVI-D connector, detachable, 3.0m

Power Consumption

Dimensions (WxDxH) / Weight

568.0 x 240.0 x 482.3 mm / 8.0kg

568.0 x 97.9 x 373.6 mm (Without Stand)

100–240 V AC, 50–60 Hz

User’s Manual - 14

Specification

General

VVEESSAA MMoouunnttiinngg IInntteerrffaaccee

100mm x 100mm (for use with Specialty Mounting hardware.)

EEnnvviirroonnmmeennttaall ccoonnssiiddeerraattiioonnss

Operating Temperature: 50°F ~ 104°F(10°C ~ 40°C)

Humidity: 10% ~ 80%, non-condensing

Storage Temperature: -4°F ~113°F (-20°C ~ 45°C)

Humidity: 5% ~ 95%, non-condensing

La page est en cours de chargement...

Sun Microsystems WDZF Manuel utilisateur

Sun Microsystems WDZF Manuel utilisateur

dans d''autres langues

Autres documents