Kodak Advantix T570 Le manuel du propriétaire

Consumer Imaging

EASTMAN KODAK COMPANY

Rochester, NY 14650

Pt. No. 20228531

T570 Auto-Focus

Camera

Camera Identification

Unfold the front and back flaps of this manual for easy reference to the camera’s parts.

1

2

3

4

5

7

8

ENGLISH/FRANÇAIS

1 Shutter button

2 Lens cover/flash

3 Print-format switch

4 Self-timer lamp

5 Viewfinder

6 Meter-cell window

7 Lens

8 Strap post

6

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: Your model camera has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

provide reasonable protection against interference in residential use. The camera

generates, uses and can radiate radio frequency energy and, if not used in

accordance with the instructions, may cause interference to radio

communications. There is no guarantee that interference will not occur. If this

camera does cause interference to radio or television reception, which can be

determined by turning the camera off and on, you may reduce the interference by

the following:

— Reorient or relocate the receiving antenna.

— Increase the separation between the camera and the receiver.

— Consult the dealer or an experienced radio/television technician for help.

Changes or modifications not approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

LCD Panel

19

20

9

21

13

14

15

16

12

10

11

9 LCD panel

10 Flash/camera-

ready lamp

11 Viewfinder

eyepiece

12 Film-rewind

button

13

MENU

14 ENTER

15 Film door

16 Film chamber

17 Film-door

switch

18

SELECT

19 Battery door

20

MODES

21 Tripod socket

Camera Identification

17

18

22 Date/time display

23 Auto-flash

indicator

24 Fill-flash indicator

25 Flash-off indicator

26 Mode-selector

arrow

27 ISO film-speed

display

28 Infinity-focus

indicator

29 Nightview

indicator

30 PM indicator

31 Self-timer indicator

32 Title-select

indicator

33 Film-presence

symbol

34 Battery symbol

35 Picture counter

22

23

24 25

26

27

28

29

303132

33

34

35

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations

1

KODAK ADVANTI

X

T570 Auto-Focus Camera

ENGLISH

NEED HELP WITH YOUR CAMERA OR MORE INFORMATION

ABOUT THE ADVANCED PHOTO SYSTEM?

Go to our web site at http://www.kodak.com or call:

Kodak (Canada only) from 8:00 a.m. to 5:00 p.m. (Eastern time) Monday through

Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area, call (416) 766-8233,

ext. 36100.

Kodak (USA only) from 9:00 a.m. to 7:00 p.m. (Eastern time) Monday through

Friday at 1 (800) 242-2424.

When you call, please have your camera available.

For warranty purposes, please keep your sales receipt as proof

of the date of purchase.

2

CONTENTS

CAMERA FEATURES AND BENEFITS ....3

GETTING STARTED .................................5

Loading the battery ..............................5

Date and time........................................5

Setting the date................................5

Setting the time ................................6

Attaching the camera strap ..................7

CONTROL-BUTTON ACTUATOR .............8

OTHER BATTERY INFORMATION ...........8

Low-battery indicator ............................8

Battery tips ............................................8

Power shut-off.......................................9

LOADING THE FILM .............................. 10

TAKING PICTURES ............................... 11

Typical print sizes (formats) ................ 12

Using the focus lock........................... 13

Tips for better pictures ....................... 14

FLASH AND PICTURE-

TAKING OPTIONS ............................. 14

Flash/camera-ready

lamp indicator................................. 15

Auto flash ........................................... 15

Fill flash............................................... 15

Flash off ............................................. 15

Nightview ............................................ 15

Infinity focus ....................................... 16

Selecting the flash and

picture-taking options .................... 16

Flash/warning-lamp signals ............... 16

Flash-to-subject distance................... 17

USING THE SELF-TIMER ...................... 17

SETTING THE PRINT TITLE

AND LANGUAGE............................... 18

Title-select list ..................................... 19

Language-select list........................... 19

UNLOADING THE FILM ......................... 19

Automatic rewind................................ 19

Manual rewind .................................... 20

CARING FOR YOUR CAMERA .............. 20

TROUBLESHOOTING............................ 21

SPECIFICATIONS .................................. 23

3

CAMERA FEATURES AND BENEFITS

Flip Flash

• The extension of the flash helps to

minimize red eyes in flash pictures and

prevents hand obstruction in front of

the flash. When the flash is closed, it

protects the lens and viewfinder.

Double Exposure Protection (DEP)

• You don’t need to worry about

accidentally re-exposing your film.

Your camera reads the Film Status

Indicator (FSI) on the film cassette

to prevent re-exposure.

Easy, Drop-in Loading

• Easy, drop-in loading is fast and virtually

error-free, eliminating blank rolls and

double exposures. The camera uses KODAK

ADVANTIX Film. The film cassette, unlike the

traditional 35 mm cartridge, becomes the

carrier and storage container for the

processed film.

Three Print Formats

• You can take three different size

pictures: Classic (C), Group/HDTV (H),

and Panoramic (P) pictures from the same

film cassette. The viewfinder changes to

show the selected picture size.

Picture Quality Information Exchange

(PQix)

• This camera records vital scene data on the

film’s magnetic information strip and

communicates that information to the photo

lab to optimize lighting and color for better-

looking prints.

Date, Time, and Title Imprinting

• The date, time, and cassette ID number are

printed on the back of your prints, which

makes it easy to organize pictures and order

reprints. You can choose from one of 10 pre-

programmed titles (6 languages available) to

print on the back of the prints.

See your

photofinisher for a full description of the

available services.

4

3

2

1

Look for this logo to be certain that the film you buy is

made for this camera.

Look for this logo to select a certified photofinisher for

developing your film and to assure that you get all the

features of the Advanced Photo System.

Processed Negatives

Fully exposed

Partially

exposed

Unexposed

Film Status Indicator (FSI)

•

A highlighted indicator advances from

one symbol to another to identify the

status of the film inside the cassette.

5

GETTING STARTED

Loading the battery

This camera uses one 3 V lithium KODAK

KCR2 (or equivalent) Battery that supplies

power for all camera operations.

1. Open the battery door (19).

• Before you

remove the

old battery,

close the

lens cover/

flash.

2. Insert the

battery into

the chamber

as shown.

3. Snap the

battery door

closed.

• After you

load a

new

battery

into the

camera,

you will need to reset the date

and time.

Date and time

This camera has a quartz clock and

automatic calendar through the year 2040.

It uses the film’s magnetic data-recording

capability to record date and time

information which your photofinisher

imprints on the back of your prints.

Setting the date

You can choose from three formats:

month/day/year, day/month/year, or

year/month/day.

1. Completely lift up the Lens cover/

flash (2) to raise the flash and to turn

on the camera.

6

2. Repeatedly press MENU (13) until the

blinking “date format” of your choice

appears on the LCD panel (9).

• The blinking “E” indicates there is no

film in the camera.

3. Press

ENTER (14) to set the format.

• If the camera is already at this format,

you can bypass this step.

4. Press SELECT (18) to actuate the setting

for month.

5. Repeatedly press and/or hold

SELECT to

select the new number for month.

6. Press

ENTER (14) to set the month and

to actuate the setting for day.

• Press ENTER again if you want to end

the selection.

7. Follow steps 4 and 5 to finish setting

the date.

Setting the time (hour/minutes)

The camera has a 12-hour clock with

PM display.

1. Completely lift up the Lens cover/

flash (2) to raise the flash and to turn on

the camera.

7

2. Repeatedly press MENU (13) until the

time appears on the LCD panel (9).

3. Press

SELECT (18) to actuate the setting

for hour.

4. Repeatedly press and/or hold

SELECT to

select the new number for hour.

5. Press

ENTER (14) to set the hour and to

actuate the setting for minutes.

6. Follow steps 3 and 4 to finish setting

the time.

• The camera automatically defaults to

the date setting but you can view the

time by pressing

MENU.

Attaching the camera strap

1. Insert the shorter looped end of the

strap behind the Strap post (8).

2. Thread the longer end of the strap

through the shorter loop.

3. Pull the strap tight.

8

OTHER BATTERY

INFORMATION

Low-battery indicator

It’s time to replace the battery when —

• the Battery symbol (34) “blinks”

on the

LCD panel (9)

or

• none of the indicators, except for a

steady battery symbol, appears on the

LCD panel and the Shutter button (1)

cannot be operated.

Battery tips

• Dispose of battery according to

local and national regulations.

• Keep a spare battery with you at

all times.

• Read and follow all warnings and

instructions supplied by the battery

manufacturer.

• Keep batteries away from children.

• Do not try to take apart, recharge or

short circuit the battery, or subject it to

high temperature or fire.

CONTROL-BUTTON ACTUATOR

You can use the knob on the clasp of the

camera strap to actuate the small control

buttons on the camera.

9

• Store the battery in its original packaging

prior to use.

• Do not use rechargeable batteries.

• Remove the battery from the camera

when the camera is not going to be used

for an extended length of time.

• In the unlikely event that battery

fluid leaks onto your skin, contact your

local health care provider. In the U.S.,

contact Kodak Health, Safety and

Environment Information at

1-716-722-5151.

• In the unlikely event that battery fluid

leaks inside the camera, contact your

local Kodak Customer Service

representative. In the U.S., customers

can contact the Kodak Information

Center (KIC) at 1-800-242-2424.

Power shut-off

To conserve battery power, the camera

automatically goes to sleep if

it is not operated for more than

2 ½ minutes. You can press any of the

control buttons, except for the print-format

switch, or close and reopen the Lens

cover/flash (2) to awaken the camera.

When the camera is not used for an

extended time, close the lens cover/flash

to completely turn off the camera.

10

1

2

3

4

LOADING THE FILM

You can load film into the camera with the

camera on or off.

1. Turn the camera upside down and move

the Film-door switch (17) to open the

Film door (15).

• The safety interlocked film door opens

only when the film chamber is empty

or the film in the camera is completely

rewound into the film cassette.

2. Insert the film cassette completely into

the Film chamber (16).

• Make sure the Film Status

Indicator (FSI) on the film cassette is

at ● (#1 position) for a new cassette.

• Do not force the film cassette into

the film chamber.

3. Close the film door to start the automatic

film advance.

• The Picture counter (35) on the

LCD panel (9) shows the number

of pictures remaining on the film.

11

TAKING PICTURES

You can take Classic (C), Group/

HDTV (H)*, and Panoramic (P) pictures on

the same film cassette. Your photo-

processing cost may be based on the

format size(s) that you use to expose

the film.

1. Completely lift up the Lens cover/

flash (2) to raise the flash and to turn on

the camera.

• The ISO

film speed

briefly

appears

on the

LCD panel

followed

by the

date.

* High Definition Television (HDTV) prints are

the same aspect ratio as the TV for CD

interface capabilities.

2. Frame your subject within the Viewfinder

eyepiece (11). For a sharp picture, stand

at least 1.3 ft (0.4 m) from your subject.

3. Slide the Print-format switch (3) to select

the desired format (C, H, or P). The viewfinder

changes to show the selected

picture size.

PC

H

• See the Typical print sizes (formats)

on page 12.

12

4. Partially press

down the

Shutter

button (1).

Typical print sizes (formats)

CHP

Classic Group (HDTV) Panoramic

3.5 x 5 in. or 4 x 6 in. 3.5 x 6 or 4 x 7 in. 3.5 x 8.5 in. to 4 x 11.5 in.

(88.9 x 127 mm or (88.9 x 152 mm or (88.9 x 216 mm to

102 x 152 mm) 102 x 178 mm) 102 x 292.7 mm)

NOTE: Your photofinisher generally provides 4 x 6, 4 x 7, and 4 x 11.5 in. (102 x 152, 102 x 178,

and 102 x 292.7 mm) sizes. Some local printers may offer 3.5 x 5, 3.5 x 6, and 3.5 x 8.5 in.

(88.9 x 127, 88.9 x 152, and 88.9 x 216 mm) sizes.

5. When the Flash/

camera-ready

lamp (10) glows

green, fully press

down the shutter

button to take

the picture.

• See the Flash/

warning-lamp

signals on

page 16.

13

Using the focus lock

This camera automatically focuses on

whatever is within the Auto Focus (AF)

circle of the viewfinder eyepiece. To get a

sharp picture, make sure the AF circle is on

your main subject. If you want to take the

picture with the subject positioned outside

of the AF circle, use the focus lock

as follows:

1. Place the AF circle on the subject that

you want focused in the picture.

VIEWFINDER

AF Circle

2. Partially press down and hold the

Shutter button (1) to lock the

focus position.

VIEWFINDER

3. While still partially pressing down on the

shutter button, move the camera until

your subject is where you want it within

the Viewfinder eyepiece (11).

4. Press the shutter button completely

down to take the picture.

14

FLASH AND PICTURE-

TAKING OPTIONS

Besides the auto-flash mode (default

setting of the camera), you can select

fill flash, flash off, infinity focus without

flash, and nightview with flash.

Repeatedly press

MODES (20) to select the

flash mode that best suits your subject and

surroundings or a picture-taking mode that

lets you tailor the camera’s fully

automatic settings.

Tips for better pictures

• Move close enough to your subject so it

fills the viewfinder but not closer than

1.3 ft (0.4 m).

• Take pictures at the subject’s level.

Kneel down to take pictures of

children and pets.

• Hold your camera vertically to

capture tall, narrow subjects, such

as a waterfall, skyscraper, or a

single person.

• Add interest to your picture by framing it

with a tree branch, a window, or

even the rails of a fence.

• Keep the sun behind you. This provides

the best subject illumination.

• Stand at an angle to shiny surfaces like

windows or mirrors to avoid flash

reflection and bright spots in

your pictures.

• Turn on all room lights and have your

subject look at the flash to reduce red

eyes in flash pictures.

15

Fill flash

When in bright sun or when bright light

comes from behind the subject, dark

shadows (especially on faces) may occur.

Use fill flash to lighten these shadows and

to add sparkle to your subject’s eyes.

Flash off

When you do not want to use the flash,

especially indoors where flash is

prohibited, or to capture the ambiance of

existing light, use the flash-off feature.

Use a tripod or place the camera on

another firm support, and use high-speed

film because the shutter speed in these

situations will most likely be slow.

Nightview

In this mode, the camera balances the

flash and existing light exposure so you

can take beautiful pictures of people at

sunset or at night. Use a tripod or place

the camera on another firm support, and

use high-speed film because the shutter

speed at night will most likely be slow.

Flash/camera-ready lamp indicator

When you partially press down the Shutter

button (1) and the Flash/camera-ready

lamp (10) glows green, the flash is fully

charged and ready for you to take pictures.

Auto flash

In dim light, such as indoors or outdoors in

heavy shade, or on dark overcast days,

you need flash. Your camera features an

automatic flash that fires when you need it.

The flip-up flash helps to minimize red eyes

in flash pictures and prevents hand

obstruction in front of the flash.

16

Infinity focus

Capture sharp, distant scenery when you

take pictures outdoors during the day or

through windows.

Selecting the flash and

picture-taking options

1. Completely lift up the Lens cover/

flash (2) to raise the flash and to turn

on the camera.

2. Keep the subject within the distance

range for the speed of film in your

camera (see Flash-to-subject

distance table on page 17).

• Don’t take pictures beyond the

maximum distance or your pictures

will be dark.

3. Repeatedly press

MODES (20) until the

Mode-selector arrow (26) points to the

Auto-flash indicator (23), Fill-flash

indicator (24) or Flash-off indicator (25),

or until the Infinity-focus indicator (28) or

Nightview indicator (29) appears on the

LCD panel (9).

4. Frame your subject within the

Viewfinder eyepiece (11).

5. Partially press down the Shutter

button (1). When the Flash/camera-

ready lamp (10) glows green, fully

press down the shutter button to

take the picture.

The flash, infinity-focus, and nightview

modes remain selected after you take

the picture. To cancel the selection,

press

MODES to select another setting

or close and reopen the lens cover/flash

to automatically return to the

default setting.

Flash/warning-lamp signals

Lamp Indicator Situation

Glows green • Flash fully charged

Glows red* • Subject closer than

1.3 ft (0.4 m)

“Blinks” red* • Flash not

fully charged

• Camera movement

* See the TROUBLESHOOTING table for

more information.

17

Flash-to-subject distance

ISO film

speed Flash-to-subject distance

50 1.3 to 9 ft (0.4 to 2.7 m)

100 1.3 to 13 ft (0.4 to 4.0 m)

200 1.3 to 18 ft (0.4 to 5.5 m)

400 1.3 to 26 ft (0.4 to 7.9 m)

800 1.3 to 36 ft (0.4 to 11 m)

1600 1.3 to 52 ft (0.4 to 15.8 m)

4. Look through the Viewfinder

eyepiece (11) to compose the picture

and to allow room for yourself in it.

5. Press the Shutter button (1).

6. Quickly position yourself in the

composed picture making sure that you

see the Self-timer lamp (4).

• The self-timer lamp on the front of the

camera blinks for approximately 10

seconds before the picture

is taken.

• To cancel the self-timer selection

before the shutter releases, press

ENTER twice or close the lens

cover/flash.

• The self-timer automatically turns

off after the shutter releases.

USING THE SELF-TIMER

Use this feature to include yourself

in pictures.

1. Use the Tripod socket (21) to attach the

camera to a tripod or place it on another

firm support.

2. Completely lift up the Lens cover/

flash (2) to raise the flash and to turn

on the camera.

3. Press

ENTER (14).

• The Self-timer indicator (31) appears

on the LCD panel (9).

18

SETTING THE PRINT TITLE

AND LANGUAGE

You can choose a print title from one of

10 pre-programmed titles

and a language (6 options)

before you take the picture.

The title you select is

recorded on the film’s

magnetic data strip. At

certified Advanced Photo

System labs, the title is printed on the back

of your photograph.

1. Repeatedly press

MENU (13) until the

Title-select indicator (32) appears on the

LCD panel (9).

2. Press

SELECT (18).

• The “title-select indicator” and the

No-title (cancel title) designator

“_ _” blinks.

3. Repeatedly press and/or hold SELECT to

select a title number. See the Title-

select list on page 19.

4. Press

ENTER (14) to set the title and to

start the language setting.

• The language code “US” and the

“title-select indicator” blinks.

5. Repeatedly press

SELECT to select the

language code. See the Language-

select list on page 19.

6. Press

ENTER to set the language and

end your selection.

• The print title/language remains

selected after you take the picture.

• To cancel the title for subsequent

pictures, follow steps 1 through 3, but

for step 3, select No title (cancel title)

“_ _” or select a different title.

La page charge ...

Kodak Advantix T570 Le manuel du propriétaire

Ce manuel convient également à

Kodak Advantix T570 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents