Kodak C750 Manuel utilisateur

Consumer Imaging

EASTMAN KODAK COMPANY

Rochester, NY 14650

Pt. No. 919 5504

Printed in U.S.A.

Kodak

C750 Zoom

Camera

Unfold the front and back flaps of this manual to view the camera’s parts.

ENGLISH/ESPAÑOL/FRANÇAIS

1 Shutter button

2 Zoom dial

3 Format-selector switch

4 Lens cover/flash

5 Light sensor

6 Viewfinder

7 Auto-focus sensors

8 Lens

9 Red-eye-reduction/

self-timer lamp

10 Film-door lever

CAMERA IDENTIFICATION

1

2

3

4

5

6

7

8

9

10

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: Your model camera has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

provide reasonable protection against interference in residential use. The camera

generates, uses and can radiate radio frequency energy and, if not used in

accordance with the instructions, may cause interference to radio

communications. There is no guarantee that interference will not occur. If this

camera does cause interference to radio or television reception, which can be

determined by turning the camera off and on, you may reduce the interference by

the following:

— Reorient or relocate the receiving antenna.

— Increase the separation between the camera and the receiver.

— Consult the dealer or an experienced radio/television technician for help.

Changes or modifications not approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Camera Identification LCD Panel

11 Battery door

12 Viewfinder eyepiece

13 Flash/camera-

ready lamp

14 LCD panel

15 Flash-mode button

16 Mode button

17 Strap post

18 Film door

19 Tripod socket

20 Mid-roll-change

(MRC) button

21 Enter/self-timer

button

22 Select button

23 Menu button

24 Auto-flash indicator

25 Red-eye-reduction

indicator

26 Fill-flash indicator

27 Flash-off indicator

28 Mode-selector arrow

29 PM indicator

30 ISO film-

speed display

31 Title/print-quantity

display

32 Self-timer indicator

33 Spot-focus icon

34 Nightview icon

35 Portrait icon

36 Infinity-focus icon

37 Frame counter

38 Film-presence

indicator

39 Date/time display

40 Battery symbol

12

13

14

15

16

17

18

19

11

20

21

22

23

PRINT

PM

ISO

QTY

TITLEROLL

AUTO FILL

26 27

28

30

31

32

29

333435

36

37

38

39

40

24

25

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations

1

KODAK ADVANTIX

C750 Zoom Camera

Welcome to the world of the Advanced Photo System!

And thank you for buying this KODAK ADVANTIX Camera.

NEED HELP WITH YOUR CAMERA?

Go to our Web site at http://www.kodak.com (for US) or

http://www.kodak.ca (for Canada) or call:

Kodak (USA only) from 9:00 a.m. to 7:00 p.m. (Eastern time) Monday through

Friday at 1 (800) 242-2424.

Kodak (Canada only) from 8:00 a.m. to 5:00 p.m. (Eastern time) Monday

through Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area,

call (416) 766-8233, ext. 36100.

When you call, please have your camera available.

For warranty purposes, please keep your sales receipt as proof

of the date of purchase.

ENGLISH

2

CONTENTS

ADVANCED PHOTO SYSTEM

FEATURES AVAILABLE WITH

THIS CAMERA ......................................3

GETTING STARTED .................................5

Loading the battery ..............................5

Setting the language............................6

List of languages ..................................7

Date and time imprinting.......................8

Setting the date and time.....................8

ATTACHING THE STRAP .........................9

CONTROL-BUTTON ACTUATOR .......... 10

LOW-BATTERY INDICATOR .................. 10

BATTERY TIPS ...................................... 10

POWER SHUT-OFF ................................ 11

LOADING THE FILM .............................. 11

TAKING PICTURES ............................... 13

Typical print sizes (formats) ................ 14

Using the focus lock........................... 15

Tips for better pictures ....................... 15

USING THE ZOOM LENS ...................... 16

TAKING FLASH PICTURES .................. 17

Flash-to-subject distance................... 18

Flash/warning-lamp signals ............... 18

FLASH MODES ..................................... 19

Auto flash with

red-eye reduction........................... 19

Fill flash............................................... 19

Flash off ............................................. 19

Auto flash without

red-eye reduction........................... 20

Selecting the flash modes ................. 20

SPECIAL-OPTION MODES ................... 20

Infinity-focus mode............................. 21

Portrait mode...................................... 21

Nightview mode.................................. 21

Center-spot focus mode .................... 21

Selecting the special-option modes .. 21

USING THE SELF-TIMER ...................... 23

TITLE IMPRINTING ................................ 24

TITLE-SELECT LIST.............................. 24

PRINT-QUANTITY SELECTION (PQS).. 26

ISO FILM-SPEED DISPLAY .................. 26

UNLOADING THE FILM ......................... 27

Automatic rewind................................ 27

Mid-roll change (MRC)........................ 27

CARING FOR YOUR CAMERA .............. 28

TROUBLESHOOTING............................ 29

SPECIFICATIONS .................................. 31

3

Triple format selection

• You can take three different size

pictures: Classic (C), Group/HDTV (H),

and Panoramic (P) pictures from the

same film cassette.

The masking inside

the viewfinder changes to match each

format selection.

Date and time/title imprinting

• The date, time, and cassette ID

number are printed on the back of your

prints, which makes it easy to organize

pictures and order reprints. You can

choose from one of 41 pre-

programmed titles (12 languages

available) to print on the back of the

prints.

See your photofinisher for a full

description of available services.

Double exposure protection (DEP)

• Don’t worry about accidentally re-

exposing your film. Your camera reads

the Film Status Indicator (FSI) on the

film cassette to prevent double

exposures.

Flip flash plus

• This system automatically adjusts

to provide just the right light in

any situation. The flash system:

–

provides extra

red-eye reduction

with the extension of the flip flash and

the red-eye-reduction mode,

–

automatically turns on for

dimly

lit scenes

,

–

delivers brighter light for clearer,

more colorful pictures for

distance shots

,

–

provides softer light for more natural

images for

close-ups

,

–

automatically

provides fill-in light for

more sparkle and clarity in harshly

lit

portraits

, and

–

recharges quickly so it is

ready to capture those

spontaneous

peak moments

.

ADVANCED PHOTO SYSTEM FEATURES

AVAILABLE WITH THIS CAMERA

4

Easy, drop-in loading

• Easy, drop-in loading is fast and

virtually error-free, eliminating blank

rolls and double exposures. The

camera uses KODAK ADVANTIX Film.

The film cassette, unlike the traditional

35 mm cartridge, communicates the

status of film and becomes the carrier

and storage container for the

processed film.

Picture quality information

exchange (PQix)

• This camera records vital scene data

on the film’s magnetic information

strip and communicates that

information to the photo lab to

optimize lighting and color for better-

looking prints.

Mid-roll change (MRC)

• You can remove your film in mid-roll

and later reload it and continue taking

pictures. MRC lets you:

–

switch film speeds in mid-roll to

match scene requirements,

–

organize by dedicating individual

film rolls to specific subjects, and

–

share a family camera in which the

members use their own roll of film.

4

3

2

1

Processed Negatives

Fully

Exposed

Partially

Exposed

Unexposed

Film status indicator (FSI)

• A highlighted indicator advances from

one symbol to another to identify the

status of the film inside the cassette.

5

GETTING STARTED

Before you take pictures, you need to

load the battery, set the language, and

set the date and time.

Loading the battery

This camera uses one 3-volt lithium

KODAK KCR2 (or equivalent) Battery

that supplies power for all camera

operations.

1. Slide the battery-door latch and lift to

open the battery door (11).

2. Insert the battery into the

battery chamber.

3. Snap the battery door closed.

• After you load a new battery into the

camera, reset the date and time.

6

2. Press and hold the menu button (23)

for approximately 4 seconds until

US appears on the LCD panel (14).

• When you release the button, the

language code “blinks.”

3. Press the right or left side of the zoom

dial (2) or the select button (22)

to cycle to your selection.

Setting the language

US English is initially set into the memory

of this camera, but you can select

another language (12 options available).

See the table on page 7 for the List of

languages

and the LCD (Liquid Crystal

Display) abbreviated codes.

1. Completely lift up the lens cover/

flash (4) to uncover the lens (8) and to

turn on the camera.

SELECT

MENU

ENTER

P

C

H

7

List of languages

Languages LCD display

American English US

UK English En

German dEU

French FrA

Spanish ESP

Japanese JP

Danish dEn

Finnish FI

Italian I

Norwegian nor

Portuguese P

Swedish S

4. Press the enter/self-timer button (21)

to complete your selection.

g

SELECT

MENU

ENTER

8

Date and time imprinting

Traditional cameras print date and/or

time information directly onto the film.

Your camera uses the film’s magnetic

data-recording capability to record date

and time information, which your

photofinisher can imprint only on the

back of your photographs. This camera

has a quartz clock and automatic

calendar through the year 2099.

Setting the date and time

Choose from three formats:

(month/day/year, day/month/year, or

year/month/day) and time format

(hour/minute) with PM display.

1. Repeatedly press the menu

button (23) to scroll and select the

desired function.

2. Press the select button (22).

• The first number(s) in the date- or

time-option mode will “blink.”

3. Press the zoom dial (2) or select

button (22) to change the number(s).

• Press the right side of the zoom dial

to increase the number and the left

side to decrease the number.

SELECT

MENU

ENTER

SELECT

MENU

ENTER

9

ATTACHING THE STRAP

1. Insert the shorter looped end of the

strap behind the strap post (17).

2. Thread the longer end of the strap

through the shorter loop.

3. Pull the strap tight.

4. Press the enter/self-timer button (21)

to store the selected number(s) and to

activate the next “blinking” number(s).

5. Follow steps 3 and 4 to continue your

selection or press the enter/self-timer

button again to stop the number(s)

from blinking and to end your

selection.

SELECT

MENU

ENTER

10

CONTROL-BUTTON ACTUATOR

You can use the knob on the clasp of the

camera strap to actuate the small control

buttons on the camera.

LOW-BATTERY INDICATOR

It’s time to replace the battery when—

• the battery symbol (40) “blinks”

on the

LCD panel (14),

• none of the indicators, except for a

steady battery symbol, appear on the

LCD panel and the shutter button (1)

cannot be operated,

or

• the LCD panel is blank when the lens

cover/flash (4) is up.

BATTERY TIPS

• Dispose of batteries according to

local and national regulations.

• Keep a spare battery with you at

all times.

• Read and follow all warnings and

instructions supplied by the battery

manufacturer.

• Keep batteries away from children.

• Do not try to take apart, recharge or

short circuit the battery, or subject it to

high temperature or fire.

• Store batteries in their original

packaging prior to use.

• Do not use rechargable batteries.

• Remove the battery from the camera

when the camera is not going to be

used for an extended length of time.

• In the unlikely event that battery fluid

leaks onto your skin, contact Kodak

Health, Safety and Environment

Information at 1-716-722-5151 in

the U.S.

11

• In the unlikely event that battery fluid

leaks inside the camera, U.S.

customers can contact the Kodak

Information Center (KIC) at 1-800-242-

2424. Customers outside the U.S. can

contact their local Kodak Customer

Service representative.

POWER SHUT-OFF

To save battery power, the camera auto-

matically goes into a sleep mode if it is

not operated for more than 2 1/2 minutes.

You can press almost any of the control

buttons, except for the format-selector

switch (3), to awaken the camera. When

the camera is not used for an extended

time, close the lens cover/flash to

completely turn off the camera.

LOADING THE FILM

You can load film into the camera with the

lens cover/flash opened or closed.

1. Rotate the film-door lever (10) to open

the film door (18).

• The film door opens only when the

film chamber is empty or the film in

the camera is completely rewound

into the film cassette and the motor

stops running.

N

P

O

E

12

Look for this logo to be certain that the film you buy is

made for this camera.

2. Insert the film cassette completely

into the film chamber. Make sure the

Film Status Indicator (FSI) on the film

cassette is at ● (#1 position) for a

new cassette or at ◗ (#2 position) for

a partially exposed cassette.

• Do not force the film cassette

into the film chamber.

3. Close the film door to start the auto-

film advance. The frame counter (37)

on the LCD panel (14) shows the

number of pictures remaining on the

film cassette.

1

2

3

4

Look for this logo to select a certified photofinisher for

developing your film and to assure that you get all the

features of the Advanced Photo System.

13

TAKING PICTURES

You can take Classic (C),

Group/HDTV (H)*

,

and Panoramic (P) pictures on the same

film cassette. See the table on page 14

for Typical print sizes (formats). Your

photo-processing cost may be based on

the format size(s) that you use to

expose the film.

1. Completely lift up the lens cover/

flash (4) to uncover the lens (8)

and to turn on the camera.

* High Definition Television (HDTV) prints are the

same aspect ratio as the TV for CD interface

capabilities.

CH

P

2. Slide the format-selector switch (3) to

select C, H, or P format. The

viewfinder changes to show the

selected field of view.

C

H

P

C

H

P

3. Look through the viewfinder

eyepiece (12) placing the Auto Focus

(AF) brackets on the subject. For a

sharp picture, stand at least 2 ft

(0.6 m) from your subject.

14

Typical print sizes (formats)

CHP

Classic Group (HDTV) Panoramic

3.5 x 5 in. or 4 x 6 in. 3.5 x 6 or 4 x 7 in. 3.5 x 8.5 in. to 4 x 11.5 in.

(88.9 x 127 mm or (88.9 x 152 mm or (88.9 x 216 mm to

102 x 152 mm) 102 x 178 mm) 102 x 292.7 mm)

NOTE: Your photofinisher generally provides 4 x 6, 4 x 7, and 4 x 11.5 in. (102 x 152, 102 x 178, and

102 x 292.7 mm) sizes. Some local printers may offer 3.5 x 5, 3.5 x 6, and 3.5 x 8.5 in.

(88.9 x 127, 88.9 x 152, and 88.9 x 216 mm) sizes.

4. Partially press down the shutter

button (1) until the flash/camera-ready

lamp (13) turns green. Fully press

down the shutter button to take

the picture.

C

H

P

15

AF Circle

Using the focus lock

This camera automatically focuses on

whatever is within the Auto Focus (AF)

brackets of the viewfinder eyepiece. To

get a sharp picture, make sure the AF

brackets are on your main subject. If you

want to take a picture with the subject

positioned outside the AF brackets, use

the focus lock as follows:

1. Place the AF circle on the subject that

you want focused in the picture.

Viewfinder

Tips for better pictures

• Move close enough to your subject so

it fills the viewfinder but not closer

than 2 ft (0.6 m).

• Take pictures at the subject’s level.

Kneel down to take pictures of

children and pets.

• Hold your camera vertically to capture

tall, narrow subjects, such as

a waterfall, skyscraper, or a single

person.

2. Partially depress and hold the shutter

button (1) to lock the focus position

and wait for the flash/camera-ready

lamp (13) to turn green.

3. While still partially depressing the

shutter button, move the camera until

your subject is where you want

it within the viewfinder eyepiece (12).

4. Fully press down the shutter button to

take the picture.

16

• Add interest to your picture by framing

it with a tree branch, a window, or

even the rails of a fence.

• Keep the sun behind you. This provides

the best subject illumination.

• Stand at an angle to shiny surfaces

like windows or mirrors to avoid flash

reflection and bright spots in your

pictures.

• Turn on all room lights and have your

subject look at the red-eye-reduction

lamp to reduce red eyes in flash

pictures.

USING THE ZOOM LENS

This camera has a motorized-zoom lens

that lets you select the ideal lens-focal

length for taking pictures. When you turn

on the camera, it is initially set to the

wide-angle position.

1. Completely lift up the lens cover/

flash (4) to uncover the lens (8)

and to turn on the camera.

2. Look through the viewfinder

eyepiece (12).

3. Press the right side of the zoom

dial (2) to zoom

closer

to the subject

in the telephoto mode or the left side

to zoom

away

from the subject in the

wide-angle mode.

4. Press the shutter button (1) to take

the picture.

• The lens barrel automatically

returns to the wide-angle position

after 2 1/2 minutes.

P

C

H

17

TAKING FLASH PICTURES

In dim light, such as indoors or outdoors

in heavy shade, or on dark overcast

days, you need flash. Your camera

features an automatic flash that fires

when you need it. The special flip-flash

plus system of this camera shortens the

flash duration in close-up pictures. This

enhances your flash pictures and helps

to conserve the battery life.

1. Completely lift up the lens cover/

flash (4) to uncover the lens (8)

and to turn on the camera.

2. Keep the subject within the

recommended distance range for the

speed of film in your camera.

Do not take pictures beyond the

maximum distance or your pictures

will be dark.

3. Partially press down the shutter

button (1).

4. When the flash/camera-ready

lamp (13) glows green, fully press

down the shutter button to take the

picture (see Flash/warning-

lamp signals on page 18).

18

Flash-to-subject distance

ISO Film Wide Tele

Speed (24 mm) (60 mm)

50 2 to 10 ft 2 to 7 ft

(0.6 to 3.0 m) (0.6 to 2.1 m)

100 2 to 14 ft 2 to 10 ft

(0.6 to 4.3 m) (0.6 to 3.0 m)

200 2 to 20 ft 2 to 14 ft

(0.6 to 6.1 m) (0.6 to 4.3 m)

400 2 to 29 ft 2 to 20 ft

(0.6 to 8.8 m) (0.6 to 6.1 m)

800 2 to 41 ft 2 to 28 ft

(0.6 to 12.5 m) (0.6 to 8.5 m)

1600 2 to 57 ft 2 to 39 ft

(0.6 to 17.4 m) (0.6 to 11.9 m)

Flash/warning-lamp signals

Lamp Indicator Situation

Glows green • Camera ready for

picture-taking

Glows red • Subject between

8 in. (20 cm) and

2 ft (0.6 m) from

camera. Shutter

button locks.

“Blinks” red • Flash not

fully charged

• Camera movement

• Beyond the

flash range

La page charge ...

Kodak C750 Manuel utilisateur

Kodak C750 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents