Silvercrest IAN 277727 Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

IAN 277727
ESPRESSO MACHINE SEMM 1470 A1
ESPRESSO MACHINE
Operating instructions
ESPRESSOMASCHINE
Bedienungsanleitung
MACHINE À EXPRESSO
Mode d’emploi
ESPRESSOMACHINE
Gebruiksaanwijzing
GB / IE / NI Operating instructions Page 1
FR / BE Mode d'emploi Page 31
NL / BE Gebruiksaanwijzing Pagina 61
DE / AT / CH Bedienungsanleitung Seite 91
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Avant de lire le mode d'emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l'appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
A
0
6
%
1
B
+
C
,
/
-
3
!
.
"
GB
IE
NI 
1
SEMM 1470 A1
Contents
Introduction ..............................................2
Copyright ..........................................................2
Limitation of liability ..................................................2
Warnings ..........................................................2
Proper use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Package contents / Transport inspection ..................................4
Disposal of the packaging .............................................4
Safety information .........................................5
Appliance elements ........................................8
Beforerst use ............................................9
Operation ...............................................10
Filling the water tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Filling the milk tank ..................................................10
Inserting the espresso sieves in the sieve holder ............................11
Adding espresso powder .............................................12
Inserting the sieve holder .............................................12
Setting the milk nozzle ...............................................13
Preparing drinks .........................................14
Selecting a suitable cup ..............................................14
Preparing espresso ..................................................15
Preparing cappuccino ...............................................17
Preparing latte macchiato .............................................19
Frothed milk .......................................................22
Cleaning and care ........................................23
Cleaning the milk nozzle and milk tank ..................................23
Cleaning the espresso sieves, sieve holder and espresso outlet ................25
Cleaning the water tank ..............................................26
Cleaning the housing ................................................26
Cleaning the accessories .............................................27
Troubleshooting ..........................................27
Technical details ..........................................28
Disposal .................................................28
Kompernass Handels GmbH warranty .......................29
Service ...........................................................30
Importer ..........................................................30
2
GB
IE
NI
SEMM 1470 A1
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. The operating instructions are part
of this product. They contain important information about safety, usage and
disposal. Before using the product, please familiarise yourself with all operating
and safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to any
future owner.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any reproduction
of images (even in a modified state), is permitted only with the written authorisa-
tion of the manufacturer.
Limitation of liability
All technical information, data and information for installation and operation
contained in these operating instructions corresponds to the latest version(s) at
the time of printing and, to the best of our knowledge, takes into account our
previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to
observe these instructions, improper use, incompetent repairs, unauthorised
modifications or for the use of non-approved replacement parts.
Warnings
The following types of warning are used in these operating instructions:
WARNING
A warning at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in injury.
Follow the instructions in this warning notice to prevent injury.
GB
IE
NI 
3
SEMM 1470 A1
CAUTION
A warning notice at this hazard level indicates a risk of material
damage.
Failure to avoid this situation could result in material damage.
Follow the instructions in this warning notice to prevent material damage.
NOTE
A note provides additional information which will assist you in using the
appliance.
Proper use
This appliance is intended exclusively for preparing drinks in domestic house-
holds. It is exclusively intended for use in private households. Do not use it for
commercial applications.
The appliance is not intended for any other purpose, nor for use beyond the
scope described.
WARNING
Danger if not used as intended!
Failure to use the appliance for its intended purpose and/or any other type of
use can be hazardous.
Use the appliance only for its intended purpose.
Observe the procedures described in these operating instructions.
No claims of any kind will be accepted for damage arising as a result of incor-
rect use.
The risk shall be borne solely by the user.
4
GB
IE
NI
SEMM 1470 A1
Package contents / Transport inspection
WARNING
Risk of suffocation!
Do not allow children to play with packaging materials. There is a risk of
suffocation.
The appliance is supplied with the following components as standard:
Espresso machine
Sieve holder
Large espresso sieve
Small espresso sieve
Measuring spoon with compactor
Operating instructions
NOTE
Check the package for completeness and signs of visible damage.
If the contents are incomplete or damaged due to defective packaging or
through transportation, contact the Service Hotline.
Disposal of the packaging
The packaging protects the appliance from damage during transport.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
If possible, keep the original packaging of the appliance for the entire
duration of the warranty period so that the appliance can be packed
properly for return shipment in the event of a warranty claim.
GB
IE
NI 
5
SEMM 1470 A1
Safety information
To ensure safe operation of the appliance, follow the safety
guidelines set out below:
WARNING – RISK OF INJURY!
Check the appliance for visible external damage before use.
Do not operate a appliance which has been damaged or
dropped.
The appliance and its connecting cable must be kept away
from children younger than 8 years old.
This appliance may be used by children aged 8 years or over
if they are supervised or have been instructed how to use the
appliance safely and have understood the potential risks.
This appliance may be used by people with reduced physical,
sensory or mental capabilities or lack of experience and/or
knowledge if they are supervised and have been instructed
in how to use the appliance safely and have understood the
potential risks.
Cleaning and user maintenance must not be carried out by
children, unless they are aged 8 or over and are supervised.
Do not allow children to use the appliance as a plaything.
All repairs must be carried out by authorised specialist companies
or by the Customer Service department. Improper repairs can
pose significant risks to the user. It will also invalidate any
warranty claims.
Never submerse the appliance in water or other liquids!
Danger of electric shock!
6
GB
IE
NI
SEMM 1470 A1
Never touch the appliance with wet or moist hands.
To avoid risks, arrange for defective plugs and/or power
cables to be replaced at once by qualified technicians or
our Customer Service Department.
Risk of burns! Some parts can become very hot during use!
Hot steam is produced while using the appliance. Ensure that
you do not scald yourself. Keep a safe distance away from the
steam.
The appliance should only be connected to correctly installed
and earthed mains power sockets.
CAUTION – PROPERTY DAMAGE
Defective components must always be replaced with original
replacement parts. Compliance with safety requirements can
only be guaranteed if original replacement parts are used.
Protect the appliance from penetration by moisture and liquids.
Protect the appliance against knocks, dust, chemicals, extremes
of temperature, etc. and keep it away from sources of heat
(ovens, radiators).
GB
IE
NI 
7
SEMM 1470 A1
Never immerse the appliance in water or other liquids!
Always remove the mains plug from the mains outlet; never
pull on the power cable.
Never leave the appliance unattended during operation.
Do not use an external timer switch or a separate remote
control system to operate the appliance.
Never operate the appliance in rooms in which the tempera-
ture is under or around 0°C. If water freezes in the pipes or
the water tank, the appliance could be damaged.
Never operate the appliance outdoors. This appliance is
intended for indoor use only.
NOTE
Repairs to the appliance during the warranty period may
only be carried out by a customer service department
authorised by the manufacturer. Otherwise, no warranty
claims will be held for any subsequent damages.
8
GB
IE
NI
SEMM 1470 A1
Appliance elements
Figure A:
“Double” espresso button
(with adjacent control lamp)
“Large” cappuccino button
(with adjacent control lamp)
“Large” latte button
(with adjacent control lamp)
Milk tank lid
“Milk quantity” knob
Milk tank
Drip tray
Drip grille
Extendable tray for small cups
Milk nozzle
- Espresso outlet
3 “Small” latte button
(with adjacent control lamp)
! “Small” cappuccino button
(with adjacent control lamp)
. “Small” espresso button (with adjacent control lamp)
Figure B:
0 Water tank lid
6 Water tank
1 Holders
% On/off switch
+ Lever for positioning the milk nozzle
Figure C:
, Sieve holder
Sieve block
/ Large espresso sieve
Small espresso sieve
" Measuring spoon with compactor
GB
IE
NI 
9
SEMM 1470 A1
Before first use
1) Clean the sieve holder ,, the measuring spoon ", the espresso sieves / ,
the drip grille , the drip tray , the tray for small cups the milk
tank , the milk tank lid , the water tank lid 0 and the water tank 6
as described in the section “Cleaning and care”.
2) Place the appliance on a level and heat-resistant surface. Ensure that the
mains outlet is in easy reach.
3) Insert the drip tray and place the drip grille on it.
4) Insert the sieve holder , together with the espresso sieve (/or) into
the appliance by inserting it at the “
” marking on the appliance and then
turning it anticlockwise until the handle of the sieve holder , is pointing to
the “
” symbol.
5) Insert the plug into a mains power socket.
NOTE
Remove the orange transport restraint from the bottom of the
water tank 6!
6) Before first use, proceed as follows to clean the internal pipes:
fill the water tank 6 with water (approx. 200 ml), and also the milk
tank (approx. 100 ml).
Insert the water tank 6 and the milk tank in the appliance.
Place a large cup on the drip grille .
Set the milk nozzle so that the milk nozzle is pointing into the cup.
Switch the appliance on using the on/off switch % (position I). All the
control lamps begin to flash. As soon as all the lamps light up perma-
nently the appliance has heated up.
Press the “Large” cappuccino button
. Wait until water stops
coming out of the espresso outlet - and all control lamps light up
permanently. Repeat this process 2x.
Switch the appliance off using the on/off switch % (position O).
Empty the remaining water from the water tank 6 and the milk tank .
NOTE
You should also clean the appliance as described here after long periods
out of use.
The appliance is now ready for use.
10
GB
IE
NI
SEMM 1470 A1
Operation
Filling the water tank
NOTE
Use only fresh drinking water to prepare espresso/cappuccino/latte
macchiatto.
1) Remove the water tank lid 0 and pull the water tank 6 upwards and out
of the appliance.
2) Fill it with water to at least the Min marking. Never fill it with more water than
up to the Max marking.
3) Push the water tank 6 back onto the appliance. Ensure that the water tank 6
clicks back into place on the appliance.
4) Put the water tank lid 0 back on.
Filling the milk tank
If you want to prepare drinks that contain milk froth, such as cappuccino or latte
macchiato, you must fill the milk tank with milk.
NOTE
You can use full fat milk, long-life milk or soya milk for this appliance.
1) Tilt the milk tank lightly upwards and, at the same time, pull it upwards
and forwards out of the appliance.
2) Take off the milk tank lid .
3) Fill it with milk to at least the Min marking. Never fill it with more milk than
up to the Max marking.
4) Replace the milk tank lid on the milk tank .
5) Push the milk tank back into the appliance so that it clicks into place.
NOTE
After preparing your drink, if you want to keep the milk in the milk tank ,
put the milk tank into the refrigerator for storage.
NOTE
If the milk tank is not in place or not properly inserted, both of the es-
presso control lamps /. light up. This shows that you can only prepare
espresso, as this does not require any milk.
GB
IE
NI 
11
SEMM 1470 A1
Inserting the espresso sieves in the sieve holder
1) Place the large / or the small espresso sieve in the sieve holder ,:
Make sure that the small indentation on the large / or small espresso
sieve lies on the indentation on the sieve holder , when you put it in.
Then turn the large / or small espresso sieve a little so that it cannot
fall out.
NOTE
Do not remove the used espresso sieve / until it has cooled down!
To remove the espresso sieve / from the sieve holder , turn the
espresso sieve / until the indentation on the espresso sieve /
is over the indentation on the sieve holder ,. You can now remove the
espresso sieve / .
12
GB
IE
NI
SEMM 1470 A1
Adding espresso powder
1) Fill the small espresso sieve to the Max marking with espresso powder.
This corresponds to around 7g of powder or a level measuring spoon ".
Or...
Fill the large espresso sieve / to the Max marking with espresso powder.
This corresponds to around 7g + 7g of powder or two level measuring
spoons ".
2) Push down the espresso powder using the compactor on the measuring
spoon ". Add more espresso powder, if required, until the espresso sieve /
is filled up to the Max marking. Then compact the espresso powder again.
NOTE
Compacting the espresso powder is a fundamentally important process
during the preparation of an espresso. If the espresso powder is compacted
very strongly, the espresso runs through more slowly and there is more
crema. If the espresso powder is not so strongly compacted, the espresso
runs through more quickly and it creates very little crema.
Inserting the sieve holder
1) Insert the sieve holder , together with the espresso sieve (/or) in the
appliance by inserting it at the “
” marking on the appliance and then
turning it anticlockwise until the handle of the sieve holder , is pointing to
the “
” symbol.
NOTE
To remove the sieve holder , after preparing a drink, turn it slowly back
to the "
" position to prevent any coffee from spraying out.
GB
IE
NI 
13
SEMM 1470 A1
Setting the milk nozzle
For cappuccino and latte macchiato you will need to adjust the milk nozzle
depending on the cup size.
1) Swing the milk nozzle so that it is pointing into the glass/cup. Always use
the milk nozzle lever + to position the milk nozzle .
2) Turn the silver attachment on the milk nozzle a little to the rear so that it is
released.
3) Depending on the size of the glass/cup, push the silver attachment on the
milk nozzle downwards a little (or upwards, depending on its previous
position). The milk nozzle should extend down into the glass/cup to
prevent splashes. You can choose between 3 heights.
4) Once you have selected a height, turn the silver attachment on the milk
nozzle back to the front so that it clicks into place and no longer moves.
For the purpose of clarity, the adjustment of the milk nozzle is shown here
with the milk tank removed. There is, however, no need to remove the milk
tank from the appliance if you want to adjust the length of the milk nozzle .
14
GB
IE
NI
SEMM 1470 A1
Preparing drinks
Selecting a suitable cup
Select a suitable cup for the kind of drink you are preparing.
Drink Size
Preset
quantity
Programmable
Espresso
Single approx. 40 ml approx. 20 - 70 ml
Double approx. 80 ml approx. 40 - 150 ml
Cappuccino
Single approx. 170 ml
Time for preparation
of frothed milk:
5 - 40 sec
Double approx. 280 ml
Time for preparation
of frothed milk:
5 - 70 sec
Latte
macchiato
Single approx. 350 ml
Time for preparation
of frothed milk:
5 - 70 sec
Double approx. 450 ml
Time for preparation
of frothed milk:
5 - 90 sec
Note: The various drink quantities are controlled via the duration of the drink
output. In other words, for a double espresso the espresso flows for twice as
long out of the espresso outlet - as for a single espresso.
1) For small espresso or coffee cups, pull the tray for small cups out of the
appliance and place the cup on it.
2) For large cups or glasses, push the tray for small cups into the appliance
and place the glasses/cups on the drip grille .
3) If there is not enough room, remove the drip tray from the appliance and
place the glass directly on the base of the appliance.
GB
IE
NI 
15
SEMM 1470 A1
Preparing espresso
1) Ensure that there is enough water in the water tank 6. Add more water if
necessary.
2) Select whether you want a single or double espresso and fit the corresponding
espresso sieve /or in the sieve holder ,.
3) Add the espresso powder to the espresso sieve / and fit the sieve
holder ,.
4) Pull the tray for small cups out of the appliance.
5) Place a suitable cup on the tray for small cups .
6) Switch the appliance on using the on/off switch % and wait until all control
lamps light up permanently. The appliance has now heated up.
7) Press the “Small” espresso button .
if you want to prepare a single espresso.
The control lamp for the “Small” espresso button . lights up. Press the
“Double” espresso button 
if you want to prepare a double espresso.
The control lamp for the “Double” espresso button
lights up.
8) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
9) Wait until the espresso has stopped flowing out of the espresso outlet - and
all control lamps light up. You can now remove your espresso.
NOTE
You can stop the preparation at any time by pressing any button.
10) Switch the appliance off using the on/off switch %.
11) Clean the appliance as described in the section “Cleaning and Care”.
NOTE
If you do not turn off the appliance with the on/off switch %, the appliance
will switch itself into power saving mode automatically after approx. 15
minutes if no other button is pushed. If you want to make another drink,
simply press any button. The appliance heats back up.
16
GB
IE
NI
SEMM 1470 A1
Setting the amount of espresso
You can set the quantity of espresso for the programmes “Small espresso” and
“Double espresso” individually:
“Small” espresso
If you want to set a custom amount of espresso for the “Small” espresso
button .
, press and hold the “Small” espresso button . for
about 3 seconds until the pump starts working. Espresso starts flowing
from the espresso outlet -.
Stop the flow of espresso by pressing the “Small” espresso button .
again as soon as the required amount has flowed out. You can set a
quantity between 20 and 70ml.
The next time you prepare an espresso using the “Small” espresso button .
the new amount of espresso will be made.
NOTE
If you want to reset the setting to the preprogrammed 40 ml, switch the
appliance off using the on/off switch %. When you switch the appliance
back on using the on/off switch % press and hold the "Small" espresso
button .
until the control lamp for the "Small" espresso button .
flashes 5 times. You can now release the button .. The programme has
been reset to 40 ml.
“Double” espresso
If you want to set a custom amount of espresso for the “Double”
espresso button 
, press and hold the “Double” espresso button

for about 3 seconds until the pump starts working. Espresso starts
flowing from the espresso outlet -.
Stop the flow of espresso by pressing the “Double” espresso button 
again as soon as the required amount has flowed out. You can set a
quantity between 40 and 150ml.
The next time you prepare an espresso using the “Double” espresso button 
the new amount of espresso will be made.
NOTE
If you want to reset the setting to the preprogrammed 80 ml, switch the
appliance off using the on/off switch %. When you switch the appliance
back on using the on/off switch % press and hold the "Double" espresso
button until the control lamp for the "Double" espresso button flashes
5 times. You can now release the button . The programme has been
reset to 80 ml.
GB
IE
NI 
17
SEMM 1470 A1
Preparing cappuccino
1) Ensure that there is enough water in the water tank 6. Add more water if
necessary.
2) Ensure that there is enough milk in the milk tank . Add more milk if necessary.
3) Select whether you want prepare a cappuccino with a single or double es-
presso and fit the corresponding espresso sieve / in the sieve holder ,.
4) Add the espresso powder to the espresso sieve / and fit the sieve
holder ,.
5) Place a suitable cup on the drip grille . Depending on the size of the cup,
you may also want to pull out the tray for small cups and place the cup
on this.
6) Set the milk nozzle so that it is pointing into the cup.
7) Use the “Milk quantity” knob to set how much milk you want to use for
your cappuccino:
Turn the “Milk quantity” knob to the left to reduce the amount of milk. Turn
the “Milk quantity” knob to the right to increase the amount of milk. Make
sure you do not turn the knob further than the “
” marking. Otherwise you
will be in cleaning mode (see section “Cleaning and care”).
NOTE
You can even correct the amount of milk during preparation by turning the
"Milk quantity" knob .
8) Switch the appliance on using the on/off switch % and wait until all control
lamps light up permanently. The appliance has now heated up.
9) Press the “Small” cappuccino button !
if you want to prepare a single
cappuccino. The control lamp for the “Small” cappuccino button !lights
up. Press the “Large” cappuccino button 
if you want to prepare a
large cappuccino. The control lamp for the “Large” cappuccino button 
lights up.
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet -, the
milk has stopped flowing out of the milk nozzle and all control lamps light
up. You can now remove your cappuccino.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124

Silvercrest IAN 277727 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à