Audio-Technica ATH-AR3BT Black Manuel utilisateur

Catégorie
Banques d'alimentation
Taper
Manuel utilisateur
User Manual
Wireless Headphones
Manuel de l’utilisateur
Casque sans fil
Bedienungsanleitung
Kabellose Kopfhörer
Manuale dell’utente
Cuffie wireless
Manual de usuario
Auriculares inalámbricos
Manual do Usuário
Fones de Ouvido Sem Fio
Руководство пользователя
Беспроводные наушники
사용설명서
무선 헤드폰
用户手册
无线头戴式耳机
使用說明書
無線耳機
ATH-AR3BT
ATH-AR3BT_UM_V2_10L_book.indb 1 2017/02/10 9:21
1
Thank you for purchasing this Audio-Technica product.
Before using the product, read through this user manual to ensure that you will use the product correctly.
Please keep this manual for future reference.
Introduction
Safety precautions
Cautions for the product
Do not use the product near medical equipment. Radio waves
may affect cardiac pacemakers and medical electronic
equipment. Do not use the product inside medical facilities.
When using the product in aircraft, follow airline instructions.
Do not use the product near automatic control devices such as
automatic doors and fire alarms. Radio waves may affect
electronic equipment and cause accidents due to malfunction.
Do not disassemble, modify or attempt to repair the product to
avoid electric shock, malfunction or fire.
Do not subject the product to strong impact to avoid electric
shock, malfunction or fire.
Do not handle the product with wet hands to avoid electric
shock or injury.
Disconnect the product from a device if the product begins to
malfunction, producing smoke, odor, heat, unwanted noise or
showing other signs of damage. In such a case, contact your
local Audio-Technica dealer.
Do not allow the product to get wet to avoid electric shock or
malfunction.
Do not put foreign matter such as combustible materials,
metal, or liquid in the product.
Do not cover the product with a cloth to avoid fire or injury by
overheating.
Follow applicable laws regarding mobile phone and headphone
use if using headphones while driving.
Do not use the product in places where the inability to hear
ambient sound presents a serious risk (such as at railroad
crossings, train stations, and construction sites).
To prevent damage to your hearing, do not raise the volume
too high. Listening to loud sound for an extended period may
cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact
with the product.
Be careful to avoid pinching yourself between the housing and
the arm of product or at the joints.
ATH-AR3BT_UM_V2_10L_book.indb 1 2017/02/10 9:21
2
Cautions for rechargeable battery
The product is equipped with a rechargeable battery (lithium polymer battery).
If battery fluid gets into eyes, do not rub them. Rinse
thoroughly with clean water such as tap water and consult a
doctor immediately.
If battery fluid leaks, do not touch fluid with bare hands. If fluid
remains inside the product, it may cause malfunction. If
battery fluid leaks, contact your local Audio-Technica dealer.
If fluid gets in your mouth, gargle thoroughly with clean
water such as tap water and consult a doctor immediately.
If your skin or clothing comes in contact with fluid,
immediately wash the affected skin or clothing with water. If
you experience skin irritation, consult a doctor.
To avoid leakage, generation of heat or explosion:
Never heat, disassemble or modify the battery, nor dispose
of it in a fire.
Do not attempt to pierce with a nail, hit with a hammer or
step on the battery.
Do not drop the product or subject it to strong impact.
Do not get the battery wet.
Do not use, leave or store the battery in the following places:
Area exposed to direct sunlight or high temperatures and
humidity
Inside of a car under the blazing sun
Near heat sources such as heat registers
Charge only with the included USB cable to avoid malfunction
or fire.
The internal rechargeable battery of this product cannot be
replaced by the user. The battery may have reached the end of
its service life if the usage time becomes significantly shorter
even after the battery has been fully charged. If this is the
case, the battery needs to be repaired. Contact your local
Audio-Technica dealer for repair details.
When the product is disposed of, the built-in rechargeable
battery needs to be discarded properly. Contact your local
Audio-Technica dealer to learn how to properly dispose of the
battery.
For customers in the USA
FCC Notice
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Caution
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
RF Exposure Statement
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter used in
other systems. This device complies with FCC radiation
exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy
that is deemed to comply without testing of specific
absorption rate (SAR).
For customers in Canada
IC statement
CAN ICES-3 (B)/NMB-3(B)
This device complies with INDUSTRY CANADA R.S.S. 247.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference which may cause undesired operation.
Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful
communication.
This device complies with RSS-102 radiation exposure limits
set forth for an uncontrolled environment.
Safety precautions
ATH-AR3BT_UM_V2_10L_book.indb 2 2017/02/10 9:21
3
Notes on use
Be sure to read the connected devices user manual before use.
Audio-Technica will not be liable in any way for any loss of data in
the unlikely event that such losses should occur while using the
product.
On public transportation or in other public places, keep the
volume low so as not to disturb other people.
Minimize the volume on your device before connecting the
product.
When using the product in a dry environment, you may feel a
tingling sensation in your ears. This is caused by static electricity
accumulated on your body, not by product malfunction.
Do not subject the product to strong impact.
Do not store the product in direct sunlight, near heating devices,
or in hot, humid, or dusty places. Additionally, do not allow the
product to get wet.
When the product is used for a long time, the product may
become discolored due to ultraviolet light (especially direct
sunlight) and wear.
If the product is placed in a bag while the included cable or USB
charging cable is still connected, the included cable or USB
charging cable may become caught, severed, or broken.
Make sure to hold the plug when connecting and disconnecting
the included cable or USB charging cable. The included cable or
USB charging cable may become severed or an accident may
occur if you pull on the cable itself.
When you are not using the included cable or USB charging
cable, disconnect it from the product.
This product can be used to talk on the phone only when using a
mobile telephone network. Support for telephony apps that use a
mobile data network is not guaranteed.
If you use the product near an electronic device or transmitter
(such as a mobile phone), unwanted noise may be heard. In this
case, move the product away from the electronic device or
transmitter.
If you use the product near a TV or radio antenna, noise may be
seen or heard in the television or radio signal. In this case, move
the product away from the TV or radio antenna.
To protect the built-in rechargeable battery, charge it at least once
every 6 months. If too much time passes between charges, the
life of the rechargeable battery may be reduced, or the
rechargeable battery may no longer be able to be charged.
ATH-AR3BT_UM_V2_10L_book.indb 3 2017/02/10 9:21
4
Part names and functions
Headband
Earpad
Slider
Housing
Left/Right (L/R)
indicator
N-Mark
Shows the location for
detecting NFC.
Included accessories
Power switch
Turns the power on
and off.
Detachable cable for smartphones
(1.2 m (3.9') / 3.5 mm (1/8") gold-plated
stereo mini-plug (4 pole/L-shaped))
Indicator lamp
Displays the operating status
and battery level of the product.
USB connector jack
Used to connect the included USB
charging cable and charge the product.
A microphone is built into
the left (L) housing.
Jog switch
Allows you to adjust the volume, play or pause music
and videos, and perform phone call operations.
Connector jack
Used to connect the included cable
and use the playthrough function.
USB charging cable
(1.0 m (3.3'))
ArmJoint
ATH-AR3BT_UM_V2_10L_book.indb 4 2017/02/10 9:21
5
Charging the battery
Fully charge the battery when using for the first time.
When the rechargeable battery is running low, the product will sound 2 sets of 2 beeps and the indicator lamp will
flash in red. When these beeps sound, charge the battery.
It takes about 5 hours to charge the battery fully. (This time may vary depending on usage conditions.)
While the battery is charging, the product’s
Bluetooth
connection remains disabled and therefore the product’s
Bluetooth
feature cannot be used.
1. Connect the included USB charging cable (micro USB Type B) to the product’s USB connector jack.
USB connector jack
USB port
USB Type A
USB charging cable
(included)
Micro USB Type B
Computer
2. Connect the included USB charging cable (USB Type A) to the computer to start charging.
During charging, the indicator lamp lights as follows:
Lit in red : Charging
Lit in blue : Charging complete
3. When charging is complete, disconnect the included USB charging cable (USB Type A) from the computer.
4. Disconnect the included USB charging cable (micro USB Type B) from the product’s USB connector jack.
ATH-AR3BT_UM_V2_10L_book.indb 5 2017/02/10 9:21
6
Connecting via
Bluetooth
wireless technology
About pairing
To connect the product to a
Bluetooth
device, the product needs to pair (register) with the device. Once they are
paired, you do not need to pair them again.
However, you will need to pair again in the following cases:
If the product is deleted from the
Bluetooth
devices connection history.
If the product is sent out for repair.
If the product is paired with 9 devices or more.
(The product can be paired with up to 8 devices. When you pair with a new device after pairing with 8 devices, pairing
information for the device with the oldest connection date will be overwritten by the information for the new device.)
Pairing a
Bluetooth
device
Read the user manual for the
Bluetooth
device.
Place the device within 1 m (3.3') of the product to perform pairing correctly.
To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Starting with the product turned off, slide the power switch to the ON”
position.
The indicator lamp will light in blue, and then flash in red and blue.
The product sounds a confirmation tone when pairing begins.
2. Use your
Bluetooth
device to begin the pairing process and search for the product.
For information about using your
Bluetooth
device, refer to the device’s user manual.
3. Select “ATH-AR3BT” to pair the product and your
Bluetooth
device.
Some devices may ask for a passkey. In this case, enter “0000”. The passkey
may also be called a passcode, PIN code, PIN number, or password.
The product sounds a confirmation tone when pairing is complete.
ATH-AR3BT
MY DEVICES
Settings Bluetooth
Bluetooth
ATH-AR3BT_UM_V2_10L_book.indb 6 2017/02/10 9:21
7
Connecting via
Bluetooth
wireless technology
Using NFC when pairing
NFC (Near Field Communication) is a technology that allows for short-range wireless communication between various
devices, such as mobile phones and IC tags. It allows two devices to communicate when you simply touch them to
each other. You can use NFC to pair your
Bluetooth
device with this product.
Compatible devices : NFC-compatible
Bluetooth
devices
Compatible OS : Android
Pairing an NFC-compatible
Bluetooth
device
To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Turn on your NFC-compatible device’s NFC feature.
Refer to your NFC-compatible devices user manual as necessary.
2. Starting with the product turned off, slide the power switch to the
ON” position.
3. Touch your NFC-compatible device to the N-Mark on the product, and
then use your NFC-compatible device to complete the pairing process.
For the location of your NFC-compatible device’s NFC antenna, or
how to end the connection between the product and your device,
refer to the devices user manual.
The product sounds a confirmation tone when pairing is complete.
Disconnecting a device
Touch your NFC-compatible
Bluetooth
device to the part just above the N-Mark on the product again to disconnect the
product from your device.
Switching the device
If the product is connected to a
Bluetooth
device and you then touch an NFC-compatible
Bluetooth
device to it, the
product will connect to the second device.
If you have an NFC-compatible
Bluetooth
device connected with the product and touch that device to another
NFC-compatible
Bluetooth
device, the device will disconnect from the product and connect with the second NFC-
compatible
Bluetooth
device.
ATH-AR3BT_UM_V2_10L_book.indb 7 2017/02/10 9:21
8
Indicator lamp display
The product’s indicator lamps indicate the product’s status as explained below.
Status
Indicator lamp display pattern
Red Blue
Pairing Searching for device
FlashingConnection
Waiting to be connected
Connecting
Battery level Battery level low
Charge
Charging
Lit
Charging complete
Lit
ATH-AR3BT_UM_V2_10L_book.indb 8 2017/02/10 9:21
9
Using the product
The product can use
Bluetooth
wireless technology to connect to your device and play music, receive phone calls,
etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee
compatible operation with connected
Bluetooth
devices.
Power supply
Power supply Switch operation Indicator lamp
ON
*1
Lights in red and blue simultaneously
(appears purple), then flashes in red
and blue*
2
OFF
*1
Lights in red and blue simultaneously
(appears purple), then turns off
*1 If you are wearing the product, you will hear a beep to indicate when the product has turned on and off.
*2 It may take several seconds for the indicator lamp to light.
Wearing the product
Place the product with the side marked “L” over your left ear and the side marked “R” over
your right ear, and adjust the headband length by sliding the adjustable slider so that the
earpads cover your ears.
Folding compactly
Using the joint as a fulcrum, the housing can be folded into the headband.
When folding the product, detach the included cable.
Be careful not to pinch your fingers, etc. in the joint.
Be sure to return the housing to its original position before using the product.
Joints
Fold
Unfold
ATH-AR3BT_UM_V2_10L_book.indb 9 2017/02/10 9:21
10
Using the product
Listening to audio
To connect for the first time, pair the product and your device by using either the
Bluetooth
wireless technology or
NFC. If you have already paired the product and your
Bluetooth
device, turn on the product and turn on your devices
Bluetooth
connection.
Use your
Bluetooth
device to start playback, referring to the device’s user manual as necessary.
Jog switch
Press Plays or pauses music and video playback.*
1
Press and hold
Depending on the connected device, activates the devices speech
recognition feature (such as Siri for compatible iOS devices).
Slide toward +
Slide and release Increases the volume by 1 level.*
2
Slide and hold (about 2 seconds) Plays the next track.*
1
Slide toward −
Slide and release Decreases the volume by 1 level.*
2
Slide and hold (about 2 seconds) Plays the previous track.*
1
*1 Some controls may not be available for music and video playback on some smartphones.
*2 A confirmation tone sounds each time you slide the jog switch. A low confirmation tone is heard when the volume is at the
maximum or minimum level.
ATH-AR3BT_UM_V2_10L_book.indb 10 2017/02/10 9:21
11
Talking on the phone
If your
Bluetooth
device supports telephone features, you can use the product’s built-in microphone to talk on the
phone.
When your
Bluetooth
device receives a phone call, the product sounds a ring tone.
If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.
When
Switch operation Function
Receiving a call
Press the jog switch. Answers the call.
Press and hold the jog switch (about 2
seconds).
Rejects the call.
Talking on a call
Press the jog switch. Ends the call.
Press and hold the jog switch (about 2
seconds).
Each time you press and hold the button (about
2 seconds), you switch the call to your mobile
phone or to the product.*
Slide the jog switch toward + or −. Adjusts the volume of the call.
* When you hear the confirmation tone, release the jog switch.
Using the product
ATH-AR3BT_UM_V2_10L_book.indb 11 2017/02/10 9:21
12
Other functions
Playthrough function
This product features a playthrough function that allows it to be used as a pair of traditional headphones, even if the
battery becomes depleted. To connect the product to your portable player, simply connect the connector plug of the
included cable to the product’s connector jack, and connect the input plug to your portable player.
Connector plug
Connector jack
Input plug
Portable player
Using the remote control with mic for smartphones
Control button
Operation
Control button
Microphone
BackFront
Press the control
button once.
Playback/pause for music/videos
Answering/ending phone calls
Some smartphones do not support playback and pause functionality for
music/video files.
Audio-Technica does not provide support for how to use smartphones.
Auto power off function
The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on.
Reset function
If the product does not work or other malfunctions occur, make sure the
product is turned off and then connect the included USB charging cable.
Make sure the cable is carrying power.
Disconnecting and then reconnecting the included USB charging cable will
reset the product and should resolve any problem you are experiencing. If
the problem persists, please contact your local Audio-Technica dealer.
USB
connector jack
Micro USB Type B
ATH-AR3BT_UM_V2_10L_book.indb 12 2017/02/10 9:21
13
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners or other solvents for cleaning purposes.
To clean, wipe with a dry cloth.
Wipe away perspiration and any other dirt from the cable with a dry cloth immediately after use. Failure to clean the
cable may cause it to deteriorate and harden over time, resulting in malfunction.
Wipe the plug with a dry cloth if dirty. Failure to clean the plug may cause the sound to cut out and may cause noise.
Wipe the earpads and headband with a dry cloth if dirty. Perspiration or water on the earpads or headband may
cause discoloration. Wipe with a dry cloth and allow to dry in the shade.
If the product will not be used for an extended period of time, store it in a well-ventilated place free from high
temperatures and humidity.
Earpads are consumable items. They will deteriorate over time due to use and storage, so replace them when
necessary. For information about replacing earpads or other parts, or for information about other serviceable
parts, contact your local Audio-Technica dealer.
ATH-AR3BT_UM_V2_10L_book.indb 13 2017/02/10 9:21
14
Troubleshooting
Problem Solution
Power is not supplied. Charge the product.
Unable to pair. Devices that communicate using
Bluetooth
ver. 2.1+EDR or higher can be
used with the product.
Place the product and the
Bluetooth
device within 1 m (3.3') of each other.
Set the profiles for the
Bluetooth
device. For procedures on how to set
profiles, refer to the
Bluetooth
devices user manual.
Unable to pair using NFC. Make sure your device is an NFC-compatible
Bluetooth
device.
Turn on your NFC-compatible
Bluetooth
devices NFC feature.
Touch the product to the correct location of your NFC-compatible
Bluetooth
device.
Depending on the NFC-compatible
Bluetooth
device you are using, the NFC
sensitivity may not be strong enough to connect to the product with just
one touch. In this case, refer to the NFC-compatible
Bluetooth
devices user
manual.
Depending on the NFC-compatible
Bluetooth
device you are using, it may
take some time to communicate via NFC. Keep the product and your NFC-
compatible
Bluetooth
device touching until the connection is completed.
Remove your NFC-compatible
Bluetooth
device from its case so that it can
communicate via NFC.
No sound is heard / Sound is faint. Turn on the power of the product and the
Bluetooth
device.
Turn up the volume of the product and the
Bluetooth
device.
If the
Bluetooth
device is set to the HFP/HSP connection, switch to the A2DP
connection.
Remove obstacles between the product and the
Bluetooth
device and place
them closer together.
Switch the output of the
Bluetooth
device to the
Bluetooth
connection.
Sound is distorted / Noise is heard
/ Sound cuts out.
Turn down the volume of the product and the
Bluetooth
device.
Keep microwaves and other devices such as wireless routers away from the
product.
Keep TVs, radios, and devices with built-in tuners away from the product.
These devices can also be affected by the product.
Turn off the equalizer settings of the
Bluetooth
device.
Remove obstacles between the product and the
Bluetooth
device and place
them closer together.
Sound cuts out when using the
aptX codec.
Adjust your
Bluetooth
devices settings to disable the aptX codec.
Cannot hear the voice of the caller
/ Voice of the caller is too quiet.
Turn on the power of the product and the
Bluetooth
device.
Turn up the volume of the product and the
Bluetooth
device.
If the
Bluetooth
device is set to the A2DP connection, switch to the HFP/HSP
connection.
Switch the output of the
Bluetooth
device to the
Bluetooth
connection.
The product cannot be charged. Securely connect the included USB charging cable and charge the product.
For details about how to operate your
Bluetooth
device, refer to the device’s user manual.
If the problem still remains, reset the product. To reset the product, refer to “Reset function” (p.12).
ATH-AR3BT_UM_V2_10L_book.indb 14 2017/02/10 9:21
15
Specifications
Communication specifications
Communication system
Bluetooth
version 4.1
Output
Bluetooth
Specification Power Class 2
1.8 mW EIRP
Maximum communication range
Line of sight - approx. 10 m (33')
Frequency band
2.402 GHz to 2.480 GHz
Modulation method
FHSS
Compatible
Bluetooth
profiles
A2DP, AVRCP, HFP, HSP
Support codec
Qualcomm
®
aptX™ audio, AAC, SBC
Supported content protection method
SCMS-T
Transmission band
20 to 20,000 Hz
Headphones
Type
Closed-back dynamic
Driver
40 mm
Sensitivity
97 dB/mW
Frequency response
5 to 35,000 Hz
Impedance
41 ohms
Input jack
3.5 mm (1/8") stereo mini-jack
Microphone (on the cable for smartphones)
Type
Electret condenser
Polar pattern
Omnidirectional
Sensitivity
-44 dB (1 V/Pa, at 1 kHz)
Frequency response
50 to 4,000 Hz
Other
Power supply
DC 3.7 V lithium polymer battery
Charging voltage/current
5 V
200 mA
Charging time
Approx. 5 hours*
Operating time Continuous transmission time including music playback time:
Max. approx. 30 hours*
Continuous standby time: Max. approx. 1,000 hours*
Weight (without cable) Approx. 190 g (6.7 oz)
Operating temperature
5°C to 40°C (41°F to 104°F)
Included accessories Detachable cable for smartphones (1.2 m (3.9') / 3.5 mm (1/8") gold-plated
stereo mini-plug (4 pole/L-shaped)), USB charging cable (1.0 m (3.3'))
Sold separately
Earpads, Cable for smartphones
* The above figures depend on operating conditions.
For product improvement, the product is subject to modification without notice.
ATH-AR3BT_UM_V2_10L_book.indb 15 2017/02/10 9:21
16
Specifications
The
Bluetooth
®
word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is
under license. All other trademarks are property of their respective owners.
AAC” logo is a trademark of Dolby Laboratories.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with
permission.
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Android is a trademark of Google Inc.
ATH-AR3BT_UM_V2_10L_book.indb 16 2017/02/10 9:21
1
Nous vous remercions d’avoir choisi ce produit Audio-Technica.
Avant utilisation, merci de lire attentivement ce manuel pour vous assurer du bon usage du produit.
Veuillez conserver ce manuel pour consultation ultérieure.
Introduction
Consignes de sécurité
Mises en garde concernant le produit
N’utilisez pas le produit à proximité d’un équipement médical.
Les ondes radio peuvent affecter les stimulateurs cardiaques
et les appareils électroniques médicaux. N’utilisez pas le
produit dans un établissement hospitalier.
Si vous utilisez le produit dans un avion, conformez-vous aux
instructions de la compagnie aérienne.
N’utilisez pas le produit à proximité d’appareils à commande
automatique, comme des portes automatiques ou des alarmes
incendie. Les ondes radio peuvent affecter les appareils
électroniques et provoquer des accidents suite à un
dysfonctionnement.
Ne démontez pas, ne modifiez pas ou n’essayez pas de réparer
le produit pour éviter tout risque d’électrocution, de
dysfonctionnement ou d’incendie.
Ne soumettez pas le produit à un choc violent pour éviter tout
risque d’électrocution, de dysfonctionnement ou d’incendie.
Ne manipulez pas le produit avec les mains mouillées pour
éviter tout risque d’électrocution ou de blessure.
Déconnectez le produit s’il commence à présenter des
dysfonctionnements, à émettre de la fumée, une odeur, de la
chaleur, des bruits indésirables ou à présenter d’autres signes
de dommage. Le cas échéant, prenez contact avec votre
revendeur local Audio-Technica.
Ne mouillez pas le produit pour éviter tout risque
d’électrocution ou de dysfonctionnement.
N’introduisez pas de corps étrangers comme des matériaux
combustibles, du métal ou un liquide dans le produit.
Ne recouvrez pas le produit avec un chiffon car cela entraînerait
un risque d’incendie ou de blessure suite à une surchauffe.
Respectez les lois en vigueur concernant l’utilisation de
téléphones mobiles et casques si vous utilisez le casque en
conduisant.
N’utilisez pas le produit dans des endroits où l’incapacité à
entendre les sons ambiants présente un risque grave (tels
qu’un passage à niveau, une gare ferroviaire et des chantiers).
Pour éviter d’endommager votre ouïe, n’augmentez pas trop le
volume. L’écoute prolongée de sons forts peut provoquer une
perte auditive temporaire ou permanente.
Cessez d’utiliser le produit en cas d’irritation cutanée
découlant d’un contact direct avec celui-ci.
Prenez garde de ne pas vous pincer entre la coque et le bras
du produit ou au niveau des jointures.
ATH-AR3BT_UM_V2_10L_book.indb 1 2017/02/10 9:21
2
Mises en garde relative à la batterie rechargeable
Le produit est doté d’une batterie rechargeable (batterie Lithium-Polymère (LiPo)).
Si le liquide de batterie pénètre dans vos yeux, ne les frottez
pas. Rincez abondamment à l’eau claire, l’eau du robinet par
exemple, et consultez immédiatement un médecin.
En cas de fuite du liquide de batterie, ne le touchez pas les mains
nues. Si le liquide reste à l’intérieur du produit, cela peut
provoquer un dysfonctionnement. En cas de fuite du liquide de
batterie, prenez contact avec votre revendeur local Audio-Technica.
Si le liquide pénètre dans votre bouche, rincez-vous
abondamment la bouche à l’eau claire, l’eau du robinet par
exemple, et consultez immédiatement un médecin.
Si le liquide entre en contact avec votre peau ou vos
vêtements, lavez immédiatement la zone affectée avec de
l’eau. En cas d’irritation cutanée, consultez un médecin.
Pour éviter les fuites, l’émission de chaleur ou une explosion:
Ne jamais chauffer, démonter ou modifier la batterie, ni la
jeter au feu.
N’essayez pas de percer la batterie avec un clou, de la
frapper avec un marteau ou de marcher dessus.
Ne laissez pas tomber le produit et ne le soumettez pas à un
impact fort.
Veillez à ne pas mouiller la batterie.
Abstenez-vous d’utiliser, laisser ou ranger la batterie dans les
endroits suivants:
Zone exposée à un ensoleillement direct ou à des
températures ou une humidité élevée(s)
À l’intérieur d’une voiture sous un soleil de plomb
Près de sources de chaleur ou d’appareils de chauffage
La recharge ne doit être faite qu’avec le câble USB fourni pour
éviter un dysfonctionnement ou un incendie.
L’utilisateur ne peut pas remplacer lui-même la batterie interne
rechargeable de ce produit. Il se peut que la batterie ait atteint
la fin de sa vie utile si la durée d’utilisation raccourcit
considérablement même si la batterie est complètement
chargée. Si tel est le cas, la batterie doit être réparée.
Contactez votre revendeur local Audio-Technica pour les détails
de la réparation.
Lors de l’élimination du produit, la batterie rechargeable
intégrée doit être mise au rebut de manière appropriée.
Contactez votre revendeur local Audio-Technica pour savoir
comment éliminer correctement la batterie.
À l’attention des clients aux États-Unis
Avis de la FCC
Avertissement
Cet appareil est conforme à la Partie15 du règlement de la FCC.
Son fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d’interférence nocive et (2)
cet appareil doit accepter les interférences reçues, y compris les
interférences pouvant provoquer un fonctionnement indésirable.
Mise en garde
Vous êtes averti que tout changement ou modification non
expressément approuvé dans ce manuel est susceptible
d’annuler votre droit d’utilisation de cet appareil.
Remarque:
Cet appareil a fait l’objet de tests afin de vérifier sa
conformité avec les limites relatives aux appareils numériques
de classe B, conformément à la partie 15 du règlement de la
FCC. Ces limites ont pour vocation d’offrir une protection
raisonnable contre les interférences nocives en installation
résidentielle. Cet appareil génère, utilise et peut émettre des
fréquences radioélectriques et provoquer, en cas d’installation
et d’utilisation non conformes aux instructions, des
interférences préjudiciables à la réception des signaux radio.
Toutefois, il n’y a pas de garantie que des interférences ne se
produiront pas dans une installation particulière. Si l’appareil
provoque des interférences préjudiciables à la réception radio ou
télévisée, ce qui peut être déterminé en éteignant et allumant
l’appareil, l’utilisateur est invité à essayer d’y remédier en
prenant une ou plusieurs des mesures suivantes:
Réorienter ou déplacer l’antenne réceptrice.
Augmenter la séparation entre l’appareil et le récepteur.
Brancher l’appareil dans une prise, sur un circuit différent de
celui auquel est raccordé le récepteur.
Demander de l’aide au revendeur ou à un technicien radio/
TV qualifié.
Déclaration d’exposition aux radiofréquences
Ce transmetteur ne doit pas être placé ou opéré en
conjonction avec tout autre transmetteur ou antenne utilisé
dans d’autres systèmes. Cet appareil est conforme aux
limites d’exposition concernant l’exposition aux radiations
établies par la FCC dans un environnement non contrôlé et
satisfait les directives d’exposition aux radiofréquences (RF)
de la FCC. Cet équipement présentant de très faibles
niveaux d’énergie de radiofréquence, il est considéré
conforme sans tester le débit d’absorption spécifique (DAS).
À l’attention des clients au Canada
Déclaration IC
CAN ICES-3 (B)/NMB-3(B)
Cet appareil est conforme à la norme INDUSTRIE CANADA
CNR247.
Son fonctionnement est soumis aux conditions suivantes:
(1) cet appareil ne doit pas causer d’interférence nocive et
(2) cet appareil doit accepter les interférences reçues, y
compris les interférences pouvant provoquer un
fonctionnement indésirable.
En vertu des règlements d’Industrie Canada, cet émetteur
radio peut uniquement fonctionner avec une antenne de
type et de gain maximum (ou moindre) approuvés pour
l’émetteur par Industrie Canada. Pour éviter que
d’éventuelles interférences radio n’affectent d’autres
utilisateurs, le type d’antenne et son gain doivent être
choisis de sorte que la puissance isotrope rayonnée
équivalente (PIRE) ne soit pas supérieure aux limites
permises pour une communication réussie.
Cet appareil est conforme aux limites d’exposition aux
rayonnements RSS-102 établies pour un environnement non
contrôlé.
Consignes de sécurité
ATH-AR3BT_UM_V2_10L_book.indb 2 2017/02/10 9:21
3
Remarques concernant l’utilisation
Veillez à lire le manuel de l’utilisateur de l’appareil connecté avant
toute utilisation.
Audio-Technica ne pourra en aucun cas être tenu responsable des
pertes de données dans le cas peu probable de leur survenue
pendant l’utilisation du produit.
Dans les transports ou d’autres lieux publics, veillez à baisser le
volume afin de ne pas déranger les autres personnes.
Baissez le volume au maximum sur votre appareil avant de
connecter le produit.
Si vous utilisez le produit dans une atmosphère sèche, vous
pouvez ressentir des picotements dans les oreilles. Ceci est dû à
l’électricité statique accumulée sur votre corps et non à un
dysfonctionnement du produit.
Ne soumettez pas le produit à un impact fort.
Ne laissez pas le produit exposé à l’ensoleillement direct, près
d’appareils générant de la chaleur ou dans un endroit chaud,
humide ou poussiéreux. Ne laissez pas non plus le casque
exposé aux liquides et aux éclaboussures.
Si vous utilisez longtemps le produit, il peut se décolorer en
raison de la lumière ultraviolette (particulièrement sous un
ensoleillement direct) et de l’usure.
Si vous placez le produit dans un sac alors que le câble ou le
câble de recharge USB fourni est encore connecté, le câble ou le
câble de recharge USB fourni peut se coincer, être coupé ou
endommagé.
Veillez à tenir le câble par la fiche lorsque vous connectez ou
déconnectez le câble ou le câble de recharge USB fourni. Le
câble ou le câble de recharge USB fourni peut se couper ou un
accident peut se produire si vous tirez sur le câble lui-même.
Si vous n’utilisez pas le câble ou le câble de recharge USB fourni,
déconnectez-le du produit.
Ce produit peut être utilisé pour parler au téléphone uniquement
si vous utilisez un réseau de téléphone mobile. La prise en charge
d’applications de téléphonie utilisant un réseau de données
mobiles n’est pas garantie.
Si vous utilisez le produit près d’un appareil électronique ou d’un
émetteur (comme un téléphone mobile), il se peut que vous
entendiez du bruit indésirable. Dans ce cas, éloignez le produit de
l’appareil électronique ou de l’émetteur.
Si vous utilisez le produit près d’une antenne de télévision ou
radio, du bruit peut être vu ou entendu dans le signal de la
télévision ou de la radio. Dans ce cas, éloignez le produit de
l’antenne de télévision ou radio.
Pour protéger la batterie rechargeable intégrée, chargez-la au
moins une fois tous les 6 mois. S’il s’écoule trop de temps entre
les recharges, la durée de vie de la batterie rechargeable peut
être réduite, ou la batterie rechargeable risque de ne plus pouvoir
être rechargée.
ATH-AR3BT_UM_V2_10L_book.indb 3 2017/02/10 9:21
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66

Audio-Technica ATH-AR3BT Black Manuel utilisateur

Catégorie
Banques d'alimentation
Taper
Manuel utilisateur