Tivoli Audio Music System+ Le manuel du propriétaire

Marque: Tivoli Audio

Modèle: Music System+

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

OWNER’S MANUAL

DAB/DAB+/DMB/FM/CD HI-FI SYSTEM

English ........................................................................................ 03

Dansk .........................................................................................17

Deutsch ......................................................................................31

Français ...................................................................................... 46

Italiano ........................................................................................60

Nederlands .................................................................................75

Norsk ..........................................................................................90

3 – ENGLISH

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. WARNING – To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain

or moisture.

6. Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Operate this product only from the type of power source indicated on the rear

panel. For products using an external power supply, use an exact replacement if lost or

damaged. For products operating from battery power, refer to the user manual.

14. For added protection for this product during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall outlet. This will prevent damage

to the product to lightning and power-line surges.

4 – ENGLISH

15. This product utilizes a laser. Use of controls or adjustments or performance of procedures

other than those speciﬁed herein may result in hazardous radiation exposure. Do not remove

the panels and do not repair yourself. Refer service to qualiﬁed personnel only.

16.

Unplug this product from the wall outlet and refer servicing to qualiﬁed service personnel

under the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the product.

c. If the product has been exposed to water or rain.

d. If the product does not operate normally by following the operating instructions.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinctive change in performance.

17. When replacement parts are required, be sure your service technician has used replacement

parts speciﬁed by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.

18.

Upon completion of any service, ask the service technician to perform safety checks to conﬁrm

the product is in proper operating condition.

19. If the LCD becomes cracked and damaged, do not touch the liquid.

20. Keep this product a safe distance away from naked ﬂame, such as a lit candle.

21.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such

as vases, shall be placed on the apparatus.

22. The recommended operating temperature range is 5˚ C to 40˚ C (41˚ F to 104˚ F).

23.

WARNING – The mains are not disconnected in the off position, but the circuits are de-powered.

24. Complies with the Canadian ICES-003 & RSS-210.

25. The power cord plug serves as the disconnect device and should remain readily accessible.

This product can be recycled. Products bearing this symbol must NOT be thrown

away with normal household waste. At the end of the product’s life, take it to a

collection point designated for recycling of electrical and electronic devices.

Find out more about return and collection points through your local authority.

The European Waste Electrical and Electronic Equipment (WEEE) Directive

was implemented to dramatically reduce the amount of waste going to landﬁlls,

there by reducing the environmental impact on the planet and on human health.

Please act responsibly by recycling used products. If this product is still usable,

consider giving it away or selling it.

5 – ENGLISH

About Tivoli Audio

Tivoli Audio was founded by Tom DeVesto with the mission of bringing simple to use, elegantly

designed, high quality audio products to consumers. As CEO and head of research and development

at his former company, Cambridge SoundWorks*, Tom was responsible for the development of

many of the best selling home entertainment and multi-media products on the market. He also held

senior management positions in product development at both Advent and Kloss Video.

*Cambridge SoundWorks is a registered trademark of Creative Labs, Singapore.

Music System+ Instructions

Congratulations on your purchase of the Tivoli Audio Music System+. We believe this to be one

of the ﬁnest-sounding stereo DAB Hi-Fi Systems on the market today. With Bluetooth® wireless

technology on board, you can stream music to your Music System+.

In order to take full advantage of what your new radio is capable of, please take a moment to read

this Owner’s Manual and Safety Instructions. If you have any quetions, please do not hesitate to

contact your dealer or Tivoli Audio.

Please save the carton and original packing should you ever need to ship your radio, as

shipping damage is not covered by the factory warranty.

On behalf of all of us, thank you for choosing Tivoli Audio and enjoy your new Music System+!

Packed with your Music System+ you should ﬁnd:

• 1 (2.7 m) Power Cord

• 1 Remote Control (Battery installed)

• 1 Cleaning Cloth

• 2 “AA” Batteries

Please contact your dealer/distributor or Tivoli Audio if any of these items are missing.

Getting Started

Before operating the Music System+, wait until it has reached room temperature. Otherwise,

condensation may form inside the CD player and it may not operate correctly. The display can

also be affected by hot or cold temperatures.

• Insert the two “AA” back-up batteries before inserting the power cord.

• Connect the power cord to the input in the rear of the Music System+ and then plug the

cord into an outlet.

• Press the Red Power Button on the front panel to turn the Music System+ on.

• Fully extend the rear telescoping antenna and be sure the rear antenna switch is in “External”

position.

• When powered on for the ﬁrst time in DAB mode, the MSY+ will initiate an auto scan. When

complete, the display will indicate how many stations were received. Be sure the rear antenna

is fully extended during the auto scan and the antenna switch is in the “External” position.

• Adjust the volume to the desired level using the front rotary knob.

6 – ENGLISH

Guide To Features (Front Panel)

1. POWER: Push to power the Music System+ On or Off (Standby).

2. VOLUME/MENU/TREBLE: Rotate clockwise to increase the volume or counter-clockwise to

decrease the volume. The volume level is represented in numbers from 0 (no output) to 30

(maximum output). If the volume ever sounds distorted, reduce the level immediately. In DAB

and FM modes, push and hold the knob to access the menu. See the sections marked “DAB

Menu” and “FM Menu”. Push brieﬂy and rotate counter-clockwise to reduce the treble or

clockwise to increase the treble. Press the volume knob in to set or the setting will store

automatically and the display will return to its previous state. This knob is also used to adjust

and enter selections (by pushing the knob in) when setting the Clock and Alarms. Adjusting

the volume during Snooze will cancel the Snooze mode.

3. ALARM 1/ALARM 2: Brieﬂy press and hold Alarm 1 or 2. A beep will conﬁrm you are in the alarm

set-up mode and the corresponding green LED will illuminate. Rotate and press the Volume knob

in to adjust and set the hour (Figure 1) and minutes (Figure 2) and press in to set and move to the

next setting. Note, adjusting the hour does not affect the minutes and vise-versa. Set the alarm

source (Figure 3 and 4) and alarm volume (Figure 5) in the same manner. Setting the alarm source

to “AUX” will cause the alarm to wake to a tone. You will not be able to set the alarm source to CD

if a CD isn’t loaded inside. Bluetooth cannot be selected as an alarm source. When the alarm LED

is off, press the Alarm button once to set the alarm. The display will show the time the alarm is set

to wake. When the alarm LED is on, press the Alarm button brieﬂy to turn it off. If the alarm is set

and power is lost, the alarm will still sound (the tone will sound in place of radio or CD) at the

designated time provided fresh batteries are correctly installed in the rear battery compartment.

When the alarm activates (Alarm LED ﬂashes) you may either turn the unit off and keep the alarm

set for the next day, press the Snooze button to temporarily mute the alarm for 7 minutes, or brieﬂy

press the Alarm button to cancel activation, turning the unit off, and keeping the alarm set to wake

the next day. Adjusting the volume during Snooze will cancel Snooze mode. CLOCK: Press and

hold to set. A beep will conﬁrm you are in the clock set mode. Use the volume knob to select

the hour (Figure 6) and then press the volume knob in to set and cycle to the minutes (Figure 7).

Adjusting the hour does not affect the minutes and vise-versa. Repeat this process to set the

year, month and the day (Figure 8, 9 and 10). Once set, press the Clock button brieﬂy to recall

the date and time whenever DAB, RDS or CD Text is displayed. When the date is shown, only

the month and day will show (not the year).

7 – ENGLISH

4. PRESETS 1–6: Press and hold to memorize the tuned station to that particular preset. A beep

will sound conﬁrming the station has been successfully stored. Press brieﬂy to recall the station

associated with that preset. There are 6 DAB presets and 6 FM presets. If a Preset button is

pressed but no station has been set, the display will show “Preset Empty” for 2 seconds. These

buttons will also act as limited direct track access during CD playback. The same station

cannot be saved to more than 1 preset. Note the remote control’s 1 through 6 buttons cannot

be used to save favorite stations to the presets, only recall them after they have been saved

using the Music System+’s front panel buttons.

5. SOURCE/BT: Brieﬂy press to cycle through the sources: DAB, FM, CD, Bluetooth/Auxiliary. The

source can’t be changed while the alarm is sounding. If the source is changed during CD playback

and the source is changed back to CD again, the CD will start playback from the ﬁrst track.

6. SLEEP: With the Music System+ playing DAB, FM, CD, Bluetooth or an auxiliary device, brieﬂy

press to begin the 20 minute Sleep timer. The corresponding green LED will illuminate while the

Sleep timer is active and the display will countdown the remaining Sleep time. The Music System+

will power off automatically at the end of the Sleep cycle. Sleep cannot be activated in CD mode

unless a CD is loaded. Note DAB, RDS and CD Text will not be displayed in Sleep mode.

/ TUNE

– :

Brieﬂy press to advance to the next track on a disc or back to a previous

track if the track has been playing for under 10 seconds. If the track has been playing for more

than 10 seconds, pressing the button will re-start the currently playing track. Using these

buttons during shufﬂe play may cause tracks to repeat. When listening to FM, press brieﬂy to

change the frequency up or down. In FM mode, press, hold, and release to seek for the next

strongly received station. Press and hold to quickly advance through the frequencies.

In DAB mode, press to access and navigate the DAB Station List. The volume knob may also

be used to navigate when in the Station List. Press the volume knob in to tune a DAB station

or press the “Enter” button on the remote. The Music System+ will return to the last-tuned

station if no action is taken in the Station List after 3 seconds. Note the volume knob will not

control the volume level when in the DAB Station List.

8. STOP: Press to stop CD playback and return to the ﬁrst track.

Fig 1, 2, 3, 4, 5

Fig 6, 7, 8, 9, 10

8 – ENGLISH

PLAY/PAUSE: With a CD loaded, brieﬂy press to initiate disc playback. Press during playback

to Pause playback and press again to resume playback. If the CD is paused for more than 5

consecutive minutes it will revert to Stop.

10. : Brieﬂy press to fast forward or fast reverse in approximately 10 second intervals. Press

again to resume normal playback or press Play. These functions are not on the remote control.

Due to the nature of MP3 CDs, using the fast reverse will cause the CD to stop playback once it

reaches the start of the track. Also note fast forward and fast reverse will not operate during CD

Intro mode. Pressing the fast scan buttons ( ) during shufﬂe play may cause tracks to repeat.

11. EJECT: Press to Eject a CD. The display will show “Ejecting”. This button is to eject only and

should NOT be used to load a CD. Always remove the disc in a straight position with-out bending

the disc. In the unlikely event you experience an error or a disc remains stuck inside, disconnect

the power cord for 60 seconds and reconnect ﬁrmly.

12.

AUDIO: Push brieﬂy to cycle through Stereo, SpacePhase

™

Wide mode, or Mono audio settings.

The SpacePhase™ Wide mode setting is designed to create a more expansive soundstage,

while the Mono setting reduces multiplex noise on weak FM stations, making otherwise

unlistenable stations listenable. Regardless of the previous audio setting, the SpacePhase™

Wide mode will automatically engage each time the Music System+ is turned on.

EQ: To temporarily turn the EQ off, press and hold the Audio button. The display will show “EQ

Off” and a conﬁrmation beep will sound. The EQ will engage again automatically the next time

the Music System+ is turned on. To keep the EQ off, press and hold the Audio button and the

display will show “EQ Always Off” and a conﬁrmation beep will sound. The EQ will remain off

until “EQ On” is selected. The EQ differs from Audio in that it enhances lower frequencies

primarily at lower volume levels. We suggest the rear Bass level be set to the center detent

position. Should the bass ever sound distorted, immediately lower the bass level and/or volume.

13. INFO: When in DAB mode, brieﬂy press repeatedly to view audio, signal strength, frequency,

signal error, and bit rate. In FM mode, view audio, signal strength, PTY (Program Type, if any)

and frequency.

14. SNOOZE/MUTE (Top of Cabinet): When the Alarm activates, press this button to silence the

alarm for 7 minutes. The display will count down the remaining Snooze time. Adjusting the

volume level will cancel the Snooze mode. During normal operation, press this button to mute

the audio. The display will show “Mute”. Press again to restore the audio output or adjust the

volume level.

15.

HEADPHONE OUT: Connect a set of headphones (not included) to this variable stereo output

for private listening. Plugging in the headphones will mute the primary speakers. The

headphone’s volume is adjusted using the front panel volume knob. This stereo output

accepts a 3.5 mm stereo male mini connector. Avoid using headphones at high volume levels

to prevent possible hearing damage.

16.

OPTICAL SENSOR: Automatically adjusts the display brightness based on ambient lighting

conditions. The display will dim in darker environments and brighten in brighter conditions. Do

not obstruct this sensor.

17. IR SENSOR: Receives signals from the included remote control. Do not obstruct this sensor.

18. SLOT-LOAD: Insert a disc (with printing side facing up) until it is drawn inside. The display will

say “Loading”. Disc functions will not work while the disc is loading. Playback will begin

automatically once the table of contents is read. The display will show “No Disc” when the unit

is set to CD mode and there is no CD inside. When ejecting a CD the display will show “Ejecting”.

For more, see “Important Notes About the CD Player.”

9 – ENGLISH

DAB/DAB+/DMB Menu

In DAB Mode, press and hold the volume knob on the Music System+, or press and hold the Menu

button on the remote control, to enter the main menu. Rotate the knob and press in to change the

items within the menu or use the Remote pq buttons and Select button.

AUTO SCAN: Searches the entire frequency range. If you move the Music System+ to another

location, you must perform a new scan so the radio will ﬁnd stations in the new location.

2. SCROLLING TEXT: Press the Select button and use the up/down arrow and Select buttons to

choose between DAB scrolling text On, Off, or Static (text will be displayed but will not scroll).

DRC: Dynamic Range Control allows you change the sound level of stations to make quiet

passages louder to compensate for a noisy environment, or when listening at a low volume level.

AUTO UPDATE: Choose between “Any”, “DAB” (also DMB) or “RDS”. For any of the auto

updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal

provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not

responsible for inaccurate time/date information provided by the auto update signal.

5. FACTORY RESET: Press Select and use the Remote pq and Select buttons to conﬁrm (Yes)

or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your

personal settings, such as presets.

DAB Display Messages

Secondary Services: Secondary stations will be indicated by a >> symbol next to the station

name. Secondary services may not be available in your area.

“?”: If this symbol appears next to the station name, it means the station is invalid or inactive.

“Not Available”: Shown when tuning a DAB station with an insufﬁcient signal.

FM Menu

In FM mode, press and hold the volume knob on the Music System+, or press and hold the Menu

button on the remote control, to enter the main menu. Rotate the knob and press in to change the

items within the menu, or use the remote's pq buttons and Select button.

1. SCAN SETTING: Press the Select button and use pq and Select button to choose between

“Strong stations only” or “All stations” when performing an auto scan. Selecting “All stations”

increases the sensitivity of the scan, possibly resulting in the auto seek stopping on noise.

This feature is not accessible in Auxiliary mode.

2. SCROLLING TEXT: Press the Select button and use the up/down arrow and Select buttons

to choose between FM RDS scrolling text On, Off, or Static (text will be displayed but will not

scroll). Not all FM stations utilize RDS text. For more about RDS, see “Reception/RDS”.

3. RDS: Select On or Off to turn RDS on or off.

AUTO UPDATE: Choose between “Any”, “DAB” (also DMB) or “RDS”. For any of the auto

updates to work, you must have consistent reception of DAB or FM RDS with a time/date signal

provided. It could take up to a minute or more for the clock to update. Tivoli Audio is not

responsible for inaccurate time/date information provided by the auto update signal.

FACTORY RESET: Press Select and use the Remote pq or tu and Select buttons to conﬁrm

(Yes) or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all

your personal settings, such as presets.

10 – ENGLISH

CD Menu

1. SCROLLING TEXT: Press the Select button and use the up/down arrow and Select buttons

to choose between CD scrolling text On, Off, or Static (text will be displayed but will not scroll).

Not all CD’s show CD text.

Guide To Features (Rear Panel)

1. ANTENNA SWITCH: Switch between the internal and the external DAB/FM antenna.

2. EXTERNAL ANTENNA: An external telescoping antenna is afﬁxed to this input. Adjust for

best reception. For more, see the section marked “Digital Radio/FM Reception”.

3. AUX IN: To hear audio from another device such as a TV or MP3 player, connect said device’s

audio output to this stereo input and set the Source button to AUX. Switching to the Auxiliary

position does not turn on the connected device. This stereo input accepts a 3.5 mm stereo male

mini connector. Note you may need to adjust the volume level differently for an auxiliary device

than the level used for radio or CD listening.

MIX IN: Connect your computer’s (or other device’s) audio output to this input to hear its audio

mixed in with the tuner, CD, or auxiliary device if one is connected. The volume level of this

input must be adjusted at the source. This input accepts a 3.5mm male stereo mini connector.

5. REC OUT: You can record from the Music System+ by connecting a cassette deck’s audio

input (or other recording device) to this ﬁxed level stereo output. The primary speakers will

not be muted when using this output. This jack accepts a 3.5 mm stereo male mini connector.

6. BASS LEVEL: Turn this control knob to the right to increase the bass volume level or to the

left to decrease the bass volume level. The subwoofer is designed to subtly augment the lower

bass frequencies, not overpower the sound. Tivoli Audio recommends setting this knob to the

center detent position. If the bass should ever sound distorted, immediately lower the bass

level control and/or the front volume control.

7. POWER INPUT: Connect the supplied power cord to this input and plug the cord into a wall

outlet not controlled by a switch. If the power cord is removed from the unit or unplugged from

the wall outlet, please wait 60 seconds before plugging the cord back into the Music System+.

When power is restored the unit will auto eject a CD if one is inside.

BATTERY COMPARTMENT: Properly install the included “AA” batteries to maintain the clock

and alarm settings during a power outage. Check the batteries annually. The display will show

“No Batteries” if there are no batteries installed or the batteries have no or low power. Dispose

ANTE NNA DAB/FM ANTE NNA

1 236 78 4 5

11 – ENGLISH

of spent batteries according to your state/country’s regulations. When operating on the battery

back-up power, the Music System+’s display and LEDs will not illuminate in order to conserve

power, but if set, the alarm will still sound at the designated time. In such a case, the tone will

sound instead of the radio or CD to further conserve battery power.

Remote Control (Remove clear tab over battery before use)

In addition to duplicating most of the front panel controls, the

remote control adds the following functions:

1. REPEAT: With a CD playing, press once to repeat the

track being played; Press twice to repeat the entire disc;

Press again to cancel the Repeat mode or press stop.

The Repeat Once ( ) and Repeat All ( ) icons will

show on the Music System+’s display when active.

Repeat 1 cannot be used in conjunction with Shufﬂe.

2. SHUFF (SHUFFLE): With a CD playing, brieﬂy press to

play the tracks in random order. The Shufﬂe icon ( ) will

show on the Music System+’s display when active. Press

the Shufﬂe button a second time to cancel shufﬂe play

or press Stop. Otherwise, CD playback will stop once all

tracks have been played. Pressing the track up or down

() on the remote and on the Music System+

during shufﬂe play may cause tracks to repeat. Note that

MP3 CDs with many tracks may repeat some songs in

Shufﬂe mode. Shufﬂe cannot be used in conjunction with

Repeat 1, Repeat All, or Intro.

3. INTRO: With a CD playing, brieﬂy press to audition 10

seconds of each track. The Intro icon ( ) will show on the Music System+’s display when

active. Press a second time to cancel Intro play or press Stop. Otherwise, CD playback will

stop once all tracks have played.

Note: The above functions cannot be activated while the disc is loading. If two of the above

functions are used at the same time, both icons will alternate on the display until ﬁnished.

4. FOLDER +/– : Advance or go back to a previous MP3 folder.

5. MENU/SELECT: Same function as pressing the Volume Control in on the Music System+ to

set selections or adjust the treble.

6. 7, 8, 9, 0: Use these buttons in addition to the 1-6 buttons to access a CD track directly. A two

second window is provided to enter another digit after the ﬁrst digit is entered.

Saved favorite station presets can be recalled using the 1 through 6 buttons on the remote

control. However, favorite stations can only be saved using the 1 through 6 buttons on the

Music System+’s front panel.

Controlling volume via the remote is performed using the up/down arrow buttons, while DAB

and FM tuning is controlled using the Left and Right arrow (CD track) buttons.

When operating the remote control at close distances the display might pulse. This is normal

and is a direct result of the remote’s ability to operate at greater distances.

When it comes time to replace the remote control’s battery, use a 3V Lithium Cell #CR2025,

installed with the positive side facing the bottom side of the remote.

INFO

SOURCE

REPEAT

SSEE LLEE CC TT

MMEENNUU

MUSIC SYSTEM+

12 – ENGLISH

Getting the most from your Music System+

Treat the Music System+ as you would a home stereo system. Although the audio from a

computer or laptop can be connected to the Music System+, it’s not intended for near-ﬁeld

(close-up) listening like “computer speakers”. As with a home stereo system, listening at a

distance will yield the best results.

2. The SpacePhase™ Wide mode and EQ settings allow you to tailor the Music System+’s sound

to your liking depending on the program material, room size and volume level. We’ve spent

countless hours of critical listening using a variety of material with different settings and at

different volume levels. In general we recommend the treble control be kept in the “0” position.

At high volume levels, for the most accurate reproduction, we recommend keeping the EQ off

and the Audio setting in Stereo or Mono (not SpacePhase™ Wide) mode.

Should you ever experience a problem, remove the batteries and the power cord for 60 seconds,

then reinstall the batteries and re-attach the cord. This should restore normal operation.

Important Notes About the CD Player

• Do not try to insert a disc in the slot if one is already inside the unit.

• The display does not show the total disc time for MP3/WMA CDs due to their often very lengthy

table of contents. Total time will be shown for commercial music CDs but if either track +/- but-

tons are pressed, the total time will disappear since the initial mode was changed.

• You may experience a delay in playback when inserting MP3 or WMA discs while the player reads

the directory. Playback will be delayed slightly while the table of contents is read.

• Disc functions will not work while the disc is loading.

• Do not use the Eject button to load a CD.

• Changing sources while a CD is playing causes the CD to stop playback. Playback will resume

when the source is set to CD again.

• The sound quality of MP3, CD-R/CD-RW, and even commercially recorded discs can vary greatly.

The same holds true for the sound quality of portable MP3 players.

• Do NOT use any CD lens cleaning discs since these are not designed for slot-load machines.

• Avoid bending the disc when loading or ejecting.

• Do not move the unit while a disc is playing and do not ship the unit with a CD inside.

• Do not insert specially shaped discs or 3" CD “single” discs.

• Paper labels stuck to CDR/CDRWs may become loose and possibly damage the player.

• CDs with severe scratches may not play properly.

• Do not insert anything except a CD inside the loading slot.

• In the rare event you experience an error, unplug the power cord for 60 seconds and then plug

it back in ﬁrmly.

13 – ENGLISH

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not

connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.

1. Turn on the Music System+ to the Auxiliary position. This will power on the Bluetooth. Turn the

volume up about ¼ to start. Also turn up the volume on the source device (the device you are

streaming from).

2. Turn on the Bluetooth wireless technology on your enabled device.

Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate

searching. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will

change from “Not Paired” to “Connected”.

4. You will hear a ring tone from the Music System+ conﬁrming connection and you can begin

playing your music ﬁles wirelessly. Adjust the volume level on your device. You should not have

to pair your device again. Depending on your device, you may need to make multiple

attempts at Pairing and/or Connecting to the Music System+, but please give your device

adequate time to Pair or Connect before repeating the process.

Pairing A Bluetooth Wireless Technology Enabled

iPhone/iPod touch/iPad

1. Turn on the Music System+ to the Auxiliary position. This will power on the Bluetooth. Turn the

volume up about ¼ to start. Also turn up the volume on the source device (the device you are

streaming from).

2. Select “Settings”.

3. Select “General”.

4. Select “Bluetooth”.

5. Switch Bluetooth “On” to initiate searching.

6. Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are prompted to

enter a PIN, enter “0000”. “Tivoli Bluetooth will change from “Not Paired” to “Connected”.

You will hear a ring tone from the Music System+ and you can begin playing your music ﬁles wirelessly.

Adjust the volume level on your device. You should not have to pair your iPhone/iPod/iPad again.

The volume output level of music ﬁles varies. If you prefer an even higher output level, check the settings

in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.

If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on your

iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing process.

Depending on your device, you may need to make multiple attempts at Pairing and/or

Connecting to the Music System+, but please give your device adequate time to Pair or

Connect before repeating the process.

When streaming music, you can press the blue arrow to the right of the next track button >>| on the

iPhone/iPod touch/iPad display to alternate between the iPhone/iPod/iPad and Bluetooth.

• The Music System+ will remember pairing information for up to 8 devices. Additional devices

can be paired, but the least-recently used device will be replaced by the newly paired device.

• If the audio drops out or stops during playback, move your device closer to the Music System+,

or check to be sure another wireless device is not interfering with the signal.

When switching from Bluetooth to DAB or FM, you may need to re-adjust (lower) the radio’s volume level.

14 – ENGLISH

Reception/RDS

The internal DAB/FM antenna will provide good reception. The supplied external DAB/FM antenna

will usually provide improved reception. Fully extend the antenna. If a noisy FM station is received,

setting the Audio button to “Mono” may help to clear up some of the multiplex noise.

The Radio Data System (RDS) transmits text information along with audio broadcasts. Program

Service data will be shown in the upper right corner when available. Not all FM stations utilize RDS,

thus text data may not be present with some stations. For stations using RDS, text may not appear

or may appear scrambled if the signal is too weak. Experimenting with the FM antenna position

may improve RDS reception. RDS content is determined by each individual FM station, therefore if

any data is shown incorrectly, this is not a fault of the unit. There are also limitations in terms of the

kinds of characters that can be displayed. Therefore it is not unusual to see a different character or

blank space in cases where the precise character can’t be reproduced. Note RDS text will not be

displayed in Sleep mode.

Buildings made with concrete, steel, or aluminum siding will hinder reception. Household appliances,

electric blankets, computers, and other electronic devices can also adversely affect reception or

inject noise. If you experience this, move the Music System+ further from the offending device or

plug it into an electrical outlet not shared by another device.

Placement

Place the Music System+ on a solid, ﬂat, stable surface strong enough to support its weight.

Placement in a bookcase, cabinet, or close to walls or corners may inﬂate the bass, creating an

unnatural sound. Do not obstruct the vents on the rear panel, as these are for sound as well as

internal heat ventilation.

The CD player built-into the Music System+ has excellent shock protection, but it is not shock

proof. We therefore recommend the Music System+ be placed on a ﬂat, level surface that is not

subject to vibration.

The Music System+ is shielded and may be placed near or below a TV or computer monitor.

Cleaning

For your own safety, be sure the Music System+ is disconnected from the power outlet during

cleaning. Never use any harsh cleansers or solvents on your radio. Fingerprints may be removed

from the cabinet using the included cloth. The face may be cleaned with a slightly damp cloth only

if necessary.

An important note about the wood cabinet: The variation in color and grain are characteristics

of real wood and contribute to the cabinet’s natural beauty. The veneer for each cabinet is

unique. As a result, the cabinet’s ﬁnish may not match other Tivoli Audio products.

Depending on the veneer, you might also notice the wood darken over time with exposure to

light. This is normal.

It is also possible dyed veneers such as blue, red, etc., could fade from exposure to sunlight.

This is not covered under the warranty.

15 – ENGLISH

Limited Warranty

Tivoli Audio manufactures its products to very high standards and we are conﬁdent our products

will perform well. Accordingly, we provide a limited warranty on this product against manufacturing

defects in material and workmanship to the original owner. This warranty is non-transferable.

Products purchased in the European Union and Norway have a minimum warranty term of two

years. For countries where minimum warranty terms are determined by statute, the warranty term

is the statutory period required. In all other locations, the warranty term is one year.

This Limited Warranty covers the functionality of the product for its normal, intended use as

speciﬁed in this Owner’s Manual. It does not cover a malfunction or damage that has resulted

from improper or unreasonable use or installation, using the charger to charge alkaline batteries,

faulty ancillary equipment, modiﬁcations, unauthorized repair, shipping damage or loss, abuse,

accidents, use on improper voltage/current, power surges, lightning or other acts of God, excess

moisture, normal wear and tear, commercial use, or purchase from unauthorized dealers. Proof

of purchase as evidence the unit was purchased from an authorized dealer may be required for

warranty service. Please contact the dealer of purchase or local distributor for warranty

service or repair.

Please refrain from opening this product or taking it apart as doing so will void this Limited

Warranty. There are no user serviceable parts inside. Tivoli Audio will not pay for costs incurred

due to correction of reception problems, elimination of externally generated static/noise, loss of

time, inconvenience, loss of use of product, or damage caused by improper use of this product.

In the event the product is returned during the warranty term and is eligible for service under this

Limited Warranty, we will repair or replace any defective parts within a reasonable period of time

and free of charge.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS SUBJECT TO SPECIFIED

CONDITIONS. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH APPLY TO THE PRODUCT

YOU HAVE ACQUIRED. THESE LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME

PLACES DO NOT ALLOW THE EXCLUSION, RESTRICTION, OR MODIFICATION OF CERTAIN

IMPLIED RIGHTS OR THEIR EFFECT. IN THOSE SITUATIONS THIS LIMITED WARRANTY WILL

ONLY APPLY TO THE EXTENT THAT THE APPLICABLE LAW ALLOWS.

The laws of your country may provide you with legal claims against the seller or manufacturer of this

product. This Limited Warranty does not affect those rights.

The provisions of the Limited Warranty are in lieu of any other warranties or conditions, except

those provided by law. This Limited Warranty does not affect any legal rights provided to you by

law and does not preclude any remedy you may have under law.

In countries where liability limits are not precluded by statute, the maximum liability of Tivoli Audio

shall not exceed the purchase price paid by you for the product. In countries where limitations of

liability are precluded by law, Tivoli Audio shall be liable for no more than the direct damages for

bodily injury, and/or real or personal property arising from the negligence of Tivoli Audio.

Where not prohibited by law, Tivoli Audio shall not be liable for special, incidental, consequential,

or indirect damages. Some places do not allow limitations on the exclusion or limitation of relief,

special, incidental, consequential or indirect damages, or the limitation of liability to speciﬁed

amounts, so the above limitations or exclusions may not apply to you.

This Limited Warranty is void if the label bearing the serial number has been removed or defaced.

If you purchased an extended service contract from your dealer and service is required after the

term of this Limited Warranty has expired, please contact your extended service contract provider

to obtain service.

16 – ENGLISH

For your convenience, you may register your product for warranty service online at our website,

www.tivoliaudio.com. There is no legal obligation for you to provide personal information. However,

such information allows us to maintain a record of the Tivoli Audio products acquired by you

and better understand the purchasers of our products. The information collected will be used for

marketing purposes by Tivoli Audio and, where permitted, to contact you in relation to the products

you have acquired or other products which might be of interest to you from Tivoli Audio or other

companies. The information that you provide may be processed in another country.

For service, please contact your dealer or local distributor.

Speciﬁcations

Model: Tivoli Audio™ Music System™+

Type: DAB/DAB+/DMB/FM/CD Hi-Fi System

Drivers: 2 x 7.62 cm (2 x 3") full-range, video shielded

1 x 13.34 cm (1 x 5.25") down-ﬁring woofer, video shielded

Dimensions: 35.88 cm W x 13.34 cm H x 24.13 cm D

(14.125" W x 5.25" H x 9.5" D)

Weight: 5.90 kg (13.0 lbs.)

Speciﬁcations subject to change without notice. Tivoli Audio reserves the right to make product changes without

notice. Tivoli Audio, the Tivoli Audio logo, Tivoli Audio Music System and Space Phase are trademarks of Tivoli Audio,

LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Tivoli Audio is under license. iPod, iPod touch, iPhone, and iPad are trademarks of Apple Inc., registered in

the U.S. and other countries.

17 – DANSK

Vigtige sikkerhedsinstrukser

1. Læs disse instrukser.

2. Gem disse instrukser.

3. Lyt til alle advarsler.

4. Følg alle instrukser.

5. ADVARSEL – For at nedsætte risikoen for brand eller elektrisk chok, må dette apparat ikke

udsættes for regn eller fugt.

6. Rengøres kun med en tør klud.

7. Bloker ikke ventilationsåbninger. Installer i overensstemmelse med fabrikantens instrukser.

Må ikke installeres nær andre varmekilder så som radiatorer, varmeriste, ovne eller andre

apparater (inklusive forstærkere) som producerer varme.

9. Omgå ikke sikkerhedsformålet med et polariseret eller jordforbindelsesstik. Et polariseret stik

har to blade og det ene blad er bredere end det andet. Et jordforbindelsesstik har to blade og

et tredje jordforbindelsesben. Det brede blad på det tredje ben er der for din sikkerhedsskyld.

Hvis det medførende stik ikke passer ind i din stikkontakt, bedes du kontakte en elektriker for

at udskifte den forældede stikkontakt.

10. Beskyt strømkablet så man ikke kan træde på det eller klemme det især ved stik, stikdåser og

der hvor de er tilsluttet apparatet.

11. Brug kun de vedhæftelser/tilbehør som fabrikanten har speciﬁceret.

12. Må kun bruges sammen med det rullebord, den stand, det stativ, det beslag

eller bord som fabrikanten har speciﬁceret, eller som blev solgt sammen med

apparatet. Når man bruger et rullebord skal man være forsigtig, når man ﬂytter

apparatet på rullebordet, så man undgår skade hvis det tipper.

13.

Brug kun dette produkt fra den type strømkilde, som er indikeret på bagpanelet.

For produkter som bruger en ekstern strømforsyning skal man erstatte den med en identisk

strømforsyning, hvis den forsvinder eller beskadiges. For produkter som bruger batteristrøm

henvises til brugermanualen.

18 – DANSK

14. For ekstra beskyttelse skal du trække stikket ud på dette produkt i tordenvejr eller hvis det

efterlades eller ikke bruges i længere tid. Det vil forhindre skade på produktet ved lynnedslag

og overspænding.

15.

Dette produkt anvender en laser. Anden anvendelse, justering eller betjening end den heri

foreskrevne kan resultere i skadelig stråling. Åben ikke produktet og forsøg ikke selv at

reparere produktet. Service og reparation må kun udføres af kvaliﬁceret personale.

16.

Træk produktet ud af stikkontakten og kontakt en kvaliﬁceret servicetekniker for service

i følgende tilfælde:

a. Hvis strømkablet eller stikket er beskadiget.

b. Hvis der er spildt væske eller hvis der er kommet noget i produktet.

c. Hvis produktet er blevet udsat for vand eller regn.

d. Hvis produktet ikke fungerer normalt, når man følger brugsanvisningerne.

e. Hvis man har tabt produktet, eller det på nogen måde er blevet beskadiget.

f. Når produktets performance ændrer sig i betydelig grad.

17. Når det er nødvendigt at bruge reservedele, skal du sørge for at serviceteknikeren bruger de

reservedele, som fabrikanten speciﬁcerer eller at de har samme karakteristika som den originale

del. Uautoriserede erstatninger kan forårsage brand, elektrisk chok eller andre farer.

18. Når der er blevet udført service, skal du bede serviceteknikeren om at udføre sikkerhedstjek

for at bekræfte at produktet fungerer korrekt.

19. Hvis LCD displayet revner eller bliver beskadiget, må væsken ikke berøres.

20. Hold sikker afstand mellem dette produkt og åben ild så som et tændt stearinlys.

21. Apparatet må ikke udsættes for dryp eller stænk og ting der er fyldt med væske, så som en

vase, må ikke stilles på apparatet.

22. Den anbefalede temperatur for brug er mellem 5 ºC og 40 ºC (41ºF - 104ºF).

23. ADVARSEL – Forsyningsnettet er ikke frasluttet, når det står på “off”, men der er ingen strøm

i kredsløbene.

24. Canada overholder RSS210, ICES-003.

25.

Stikket på strømkablet fungerer som en fraslutningsanordning og skal altid være let tilgængelig.

Dette produkt kan genbruges. Produkter med dette symbol må IKKE smides

væk sammen med almindeligt husholdningsaffald. Når du vil smide produktet

ud, bedes du tage det til et indsamlingssted for genbrug af elektriske og

elektroniske anordninger. Få mere information om steder for returnering og

indsamling hos din lokale myndighed.

Det europæiske direktiv om affald af elektrisk og elektronisk udstyr (WEEE)

blev implementeret for at stærkt nedsætte mængden af affald som ender på i

lodsepladsen og derved nedsætte den miljømæssige påvirkning på jorden og

på menneskers helbred. Udvis venligst ansvarlighed ved at genbruge brugte

produkter. Hvis dette produkt stadigt kan bruges, bedes du overveje at forære

det væk eller sælge det.

19 – DANSK

Om Tivoli Audio

Tivoli Audio blev startet af Tom DeVesto som havde en mission om at bringe brugervenlige og

elegant designede audioprodukter af høj kvalitet til forbrugerne. Som administrerende direktør

og chef for forskning og udvikling på hans tidligere arbejdsplads, Cambridge SoundWorks*, var

Tom ansvarlig for at udvikle mange af de home entertainment og multimedie produkter, der sælger

bedst på markedet. Han arbejdede også i topledelsesstillinger indenfor produktudvikling hos både

Advent and Kloss Video.

*Cambridge SoundWorks is a registered trademark of Creative Labs, Singapore.

Music System+ Instruktioner

Tillykke med dit køb af Tivoli Audio Music System+. Vi anser dette for at være et af de mest

velspillende stereo DAB Hi-Fi systemer på markedet i dag. Med Bluetooth® trådløs teknologi

indbygget, kan du streame musik til dit Music System+.

For at få fuldt udbytte af dit nye systems muligheder, anbefaler vi at du bruger lidt tid på at læse

denne brugervejledning. Hvis du har nogen spørgsmål, er du velkommen til at kontakte din

forhandlere eller Tivoli Audio.

Venligst gem den originale emballage, i tilfælde af, at du skulle få brug for at sende dit system,

da skader opstået under forsendelse ikke er omfattet af garantien.

Vi takker dig for at vælge Tivoli Audio og ønsker dig god fornøjelse med dit nye Music System+!

I pakken med dit Music System+ ﬁnder du:

• 1 stk. 2,7m lysnet ledning

• 1 stk. Fjernbetjening (Batterier er isat)

• 1 stk. Pudseklud

• 2 stk. Batterier (AA)

Hvis nogle af disse dele mangler, bedes du kontakte din forhandler eller Tivoli Audio.

Kom Godt I Gang

Før du tager Music System+ ibrug, bedes du sikre at systemet har stuetemperatur. Ellers kan

kondens opstå inden i CD afspilleren og denne vil så muligvis ikke virke korrekt. Displayet kan

ligeledes blive påvirket af for varme eller kolde temperaturer.

• Isæt de to “AA” batterier, før lysnet-ledningen tilsluttes.

• Tilslut lysnetledningen på bagsiden af Music System+ og tilslut derefter ledningen til en stik-

kontakt.

• Tryk på den røde tænd/sluk knap for forsiden af Music System+ for at tænde systemet.

• Træk teleskopantennen på bagsiden ud i fuld længde og sørg for at antenne kontakten på bag-

siden står på “External”-positionen.

• Første gang systemet tændes i DAB-mode, vil systemet starte en automatisk scanning. Når den

er gennemført vil displayet vise hvor mange stationer det har fundet. Vær sikker på at anten-

nen er udtrukkekt i fuld længde under scanningen og at antenne kontakten på bagsiden står i

“External”-positionen.

• Tilpas lydstyrken til det ønskede niveau med drejeknappen på forsiden.

20 – DANSK

Funktions Guide (Front Panel)

1. TÆND/SLUK: Tryk for at tænde eller slukke for Music System+.

VOLUME/MENU/TREBLE: Volumen/DAB menu/diskant: Drej i urets retning for at øge lydstyrken

eller modsat uret for at sænke lydstyrken. Lydstyrke-niveaut vises som et tal mellem 0 (ingen

lyd) til 30 (Maksimal lydstyrke). Hvis lyden nogensinde skulle lyde forvrænget, skru da straks ned

lydstyrken. I DAB og FM-mode, tryk og hold knappen for at aktivere menuen. Se sektionerne

“DAB Menu” og “FM Menu”. Tryk kortvarigt og drej mod uret for at reducere diskanten eller med

uret for at øge diskanten. Tryk volumenknappen ind for at vælge indstillingen eller indstillingen

vil automatisk gemmes og displayet vil vende tilbage til den tidligere tilstand. Denne knap anvendes

også til at tilpasse og vælge indstillinger (ved at trykke knappen ind) når Ur og Alarm indstilles.

Ændring af lydstyrken under Snooze-mode vil annullere Snooze-mode.

3. ALARM 1/ALARM 2: Tryk og hold kortvarigt Alarm 1 eller 2. Et bip vil bekræfte at du er i Alarm-

indstillings tilstand og det grønne LED lys til tænde. Drej og tryk Volumen-knappen for at indstille

time (Figur 1) og minutter (Figur 2) og tryk ind for at vælge indstilling og gå videre til næste trin.

Bemærk, at ændring af time ikke påvirker minutter og omvendt. Indstil alarm-kilden (Figur 3 og 4)

og alarm lydstyrken (Figur 5) på samme måde. Sættes alarm kilden til “AUX” vil få alarmen til vække

med en tone. Det er ikke muligt at sætte alarmkilden til “CD”, hvis der ikke er en CD i systemet.

Bluetooth kan ikke vælge som alarmkilde. Når alarm LED lyset er slukket, tryk på alarmknappen

én gang for at aktivere alarmen. Displayet vil vise tidspunktet alarmen er sat til at vække. Når alarm

LED lyset er tændt, trykkes èn gang for at deaktivere alarmen. I tilfælde af strømafbrydelse, vil

alarmen stadig kunne vække (en tone vil vække i stedet for CD eller radio) på det indstillede tidspunkt,

såfremt friske batterier er korrekt indstalleret. Når alarmen vækker (Alarm LED lyset blinker) kan

du enten slukke systemet og bevare alarmindstillingen til næste dag, trykke Snooze-knappen for

at udsætte alarmen 7 minutter, eller trykke kortvarigt på Alarm-knappen for at deaktivere alarmen.

Justering af lydstyrke under Snooze vil deaktivere Snooze-mode.

Fig 1, 2, 3, 4, 5

La page charge ...

Tivoli Audio Music System+ Le manuel du propriétaire

Marque: Tivoli Audio

Modèle: Music System+

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

italiano: Tivoli Audio Music System+ Manuale del proprietario
Deutsch: Tivoli Audio Music System+ Bedienungsanleitung
Nederlands: Tivoli Audio Music System+ de handleiding
dansk: Tivoli Audio Music System+ Brugervejledning

Documents connexes

Autres documents

Hema 13.78.0010 Manuel utilisateur