Ice Cream Dipping Cabinet

User’s Manual

- 1 -

User Manual

360ADC4HC, 360ADC4CHC, 360ADC4FHC

360ADC8HC, 360ADC8CHC, 360ADC8FHC

360ADC12HC, 360ADC12CHC, 360ADC12FHC

Please read the manual thoroughly prior to equipment set-up,

operation and maintenance.

- 2 -

User Manual

CONTENANT LE FRIGORIGENE.

CAUTION – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. CONSULT REPAIR

MANUAL/OWNER’S GUIDE BEFORE ATTEMPTING TO SERVICE THIS PRODUCT. ALL SAFETY

PRECAUTIONS MUST BE FOLLOWED.

ATTENTION – RISQUE DE FEU OU D’EXPLOSION. LE FRIGORIGÈNE EST INFLAMMABLE.

CONSULTER LE MANUEL DU PROPRIÉTAIRE/GUIDE DE RÉPARATION AVANT DE TENTER UNE

RÉPARATION. TOUTES LE MESURES DE SÉCURITÉ DOIVENT ÊTRE RESPECTÉES.

CAUTION – RISK OF FIRE OR EXPLOSION DUE TO PUNCTURE OF REFRIGERANT TUBING;

FOLLOW HANDLING INSTRUCTIONS CAREFULLY. FLAMMABLE REFRIGERANT USED.

ATTENTION – RISQUE DE FEU OU D’EXPLOSION SI LA TUBULURE CONTENTANT LE

SUIVRE LES INSTRUCTIONS DE MANUTENTION AVEC SOIN CONFORMÉMENT AUX

RÈGLEMENTATION GOUVERNEMENTALE LOCAUX.

- 3 -

User Manual

Please read this manual thoroughly prior to equipment set-up, operation and maintenance.

• To prevent compressor or system damage, do not transport the unit on an incline of more than 45

• Do not use the condenser, lid, or hinges as loading or unloading points.

• Before use, remove all packing material.

• Ensure the freezer is placed on a stable surface to avoid vibration and noise.

• Install the freezer in a well ventilated area with 4” clearance between the surrounding walls and the

attempt to repair it yourself.

• If the voltage is unstable, please choose the suitable automatic voltage regulator.

• The temperature control may need to be adjusted based on the amount of food in the freezer and the

ambient room temperature. More food or a higher room temperature may require a lower temperature

• Before placing food into the freezer, adjust the temperature control to the lowest point (highest number)

and let it run for several hours. Put the food in, and after 12 hours adjust the temperature control to the

normal point.

• Never put hot food directly in the freezer. Food should be cold or frozen before placing it inside.

• Do not fill the freezer full of product. For best results, meats and other large items should be divided into

- 4 -

User Manual

• Install the unit on a strong and leveled surface.

- If the surface is uneven, the unit may be noisy.

- The unit may malfunction if the surface is uneven.

• Install the unit in an indoor, well ventilated area.

- For best performance, maintain 6” of clearance on both sides and the back of the

unit at all times.

- Outdoor use may cause decreased efficiency and damage to the unit.

- Avoid direct sunlight.

• Avoid installation in a high humidity and / or dusty area.

- Malfunction due to high ambient temperatures and humidity will void the warranty

The temperature in the cabinet can be adjusted with the control knob.

If your unit has a numbered control knob:

Setting between “4” and “5” is standard for storage and service of ice cream. If a different

temperature is needed knob may be adjusted to a lower number (warmer) or a high

To ensure optimal performance, unit should be placed into a defrost when the thickness of the ice on

the cabinet wall reaches 1/4”. To defrost, turn the temperature control knob to the lowest setting (the

• When the freezer is running, the condenser and compressor will be hot.

- 5 -

User Manual

NOTE: We strongly recommend that any servicing be performed by an authorized service technician.

• The freezer should not be left unused for a long period of time. If you plan to stop using the freezer, power it

• Children should not operate this machine

• We have the right to change materials and specifications without notice. Please find the specific parameters

- 6 -

User Manual

Glass Canopy Assembly

1) Install the 3 plastic channels along the sides and front of the cabinet using the

2) Insert the side glass panel into the side channel. Attach a metal plate to the cabinet

- 7 -

User Manual

4) Install the gasket on the top edge of the front glass panel, and place top glass

3) Insert the front glass panel into the front channel. Then, use the L-shaped brackets and