Tripp Lite Owner's Manual B302-4HX4H-4K, B302-8HX8H-4K Le manuel du propriétaire

Taper
Le manuel du propriétaire
1
Owner’s Manual
HDMI Matrix Switch/Splitters
with Audio Extractor and
Multi-Resolution Support
Model: B302-4HX4H-4K, B302-8HX8H-4K
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty
Español 15 • Français 29 • Русский 43
2
• B302-4HX4H-4K or B302-8HX8H-4K HDMI Matrix Switch/Splitter
• IR Remote Control
• IR Receiver Cable, 4 ft.
• International Power Supply (Input: 100–240V)
• (x4) International Plug Adapters (North America, U.K., Europe, Australia)
• Mounting Hardware
• Driver CD
• Owner’s Manual
Package Contents
• P569-XXX-CERT High-Speed HDMI 2.0 Cables
• P312-Series 3.5 mm Audio Cables
• N202-Series Cat6 24 AWG Solid-Wire Patch Cables
Optional Accessories
• Shares true 4K video from 4 different HDMI sources among 4 separate displays (B302-4HX4H-4K) or 8 different
HDMI sources among 8 separate displays (B302-8HX8H-4K)
• Displays any audio/video signal on any display or the same signal on all displays
• Supports true 4K resolutions up to 4096 x 2160 @ 60 Hz
• Transmits analog stereo audio
• Switches between sources and displays via front-panel pushbuttons, IR remote control, RS-232 serial commands or
control software
• Multi-resolution support allows mixing and matching of monitors of various resolutions
• HDR (High Dynamic Range) offers richer contrast and expanded color accuracy
• Audio extraction allows connection of speakers, amplifiers or sound bars
Product Features
3
The following panels depict the 8x8 HDMI Matrix Switch/Splitter. It is identical to the 4x4 model, except with 4 more input and
output ports.
Panel Descriptions
1
HDMI Inputs – Connect up to 8 HDMI source devices.
2
HDMI Outputs – Connect up to 8 HDMI display devices.
3
DC 12V – Connect the included 12V DC power supply.
4
RS-232 Port – Connect a PC or laptop to send RS-232 serial commands to the unit via terminal.
5
TCP/IP Port – Connect a PC or laptop via Cat6 cable to remotely control the unit via GUI.
6
IR EXT – Connect the included IR Receiver Cable for IR signal reception from the included IR Remote Control.
7
Audio Outputs – Connect up to 8 sets of speakers or amplifiers.
8
Power – Switch to turn the unit on and off.
1 2 3
4 5 6 7 8
9
LCD Screen – Displays the unit’s information and settings.
10
In/Out Select – Let you mix and match any input to any output. Press “ALL” to send one input to all connected displays.
11
EDID Select – Let you set EDID information for the Input and Output ports.
12
Lock – Locks all front-panel buttons to prevent accidental changes. Press “LOCK” again to unlock buttons.
13
Enter – Press to confirm commands.
14
IR – IR signal receptor for the included remote control.
9 10 11 13 14
12
4
Refer to the following steps and diagram to set up your HDMI matrix switch installation.
Note: Before making any connections, make sure power to all devices connected to the switch is turned off.
Installation
1
Connect up to 8 (B302-8HX8H-4K) or 4 (B302-4HX4H-4K) HDMI sources to the switch with user-supplied cables.
2
Connect up to 8 (B302-8HX8H-4K) or 4 (B302-4HX4H-4K) HDMI displays to the switch with user-supplied cables.
3
(Optional) Connect up to 8 (B302-8HX8H-4K) or 4 (B302-4HX4H-4K) speakers or amplifiers to the switch with user-
supplied 3.5 mm audio cables.
4
(Optional) Connect a PC or laptop to the RS-232 port to control the switch via RS-232 commands.
5
(Optional) Connect a PC or laptop to the TCP/IP port with a user-supplied Cat6 cable to control the switch via the GUI.
6
(Optional) Connect the included IR Receiver Cable to the IR EXT port.
7
Connect the included power supply to the 12V DC port and turn on the power using the power switch. Within 20–30
seconds, each input signal will be displayed with its corresponding output port.
12V Power Adapter
HDMI Display 1
4K/60Hz
HDMI Display 8
4K/60Hz
Amplifier 1 Amplifier 8
IR Extender
RS-232 and RJ45
Equipped PC
HDMI Source 1 HDMI Source 8
........... ........... ..................
1 234 5 6 7
5
The following instructions are for the 8x8 HDMI Matrix Switch/Splitter, but apply equally to the 4x4 model.
The B302-Series HDMI Matrix Switch/Splitter features three different methods of control:
1) Front-panel pushbuttons
2) IR remote control
3) TCP/IP or RS-232 control via PC or laptop
Front-Panel Pushbuttons
The following section describes how to change the inputs and outputs manually.
1) To change an input to a specific output, press the desired input (IN 1–8), then the desired output (OUT 1–8). Press
“ENTER” to confirm the new settings.
2) If you wish to send one input to more than one output display, press the desired input (IN 1-8), then the desired outputs
(OUT 1–8). Once you have selected all the desired outputs, press “ENTER” to confirm the setting changes. To select all
the outputs at once, press “ALL.”
3) To preset the output EDID settings of one or all inputs, press the desired input (IN 1–8), then “EDID MENU.” The LCD
screen will display the input source settings as shown below. Press “UP/DOWN” to select a preset EDID. Please see EDID
Table for a list of all the preset resolutions. Hit “ENTER” to confirm the setting.
4) To enter the output mode selection menu, press “UP.” In the menu, users can choose between Default and Smart mode.
a) Default: All displays are defaulted to output 4K x 2K @ 60 Hz or the user-defined EDID setting.
b) Smart: Outputs the lowest capable resolution of the connected displays.
To switch the mode, press “DOWN.” By default, the unit comes preset in Default mode.
Operation
6
Operation
IR Remote Control
The following section describes how to operate the remote. “N” indicates a number value (1–8).
“+” indicates continuous pressing. There is no “+” button.
1) The format of switching channels (inputs to outputs) with the remote control is as follows:
Input (N) + Switch + Output (N), Input (N) + Switch + Output (N), …. + Enter.
For example: If you wish to send Input 1 to Output 2 and Input 2 to Output 4,
the sequence will be: Input (1) + Switch + Output (2) + Input (2) + Switch
+ Output (4) + Enter.
2) To select multiple outputs for one input, an example would be:
Input (1) + Switch + Output (2) + Output (5) + Output (8) + Enter.
3) ALL” is the shortcut button to select all output channels (displays).
It works in the following fashion: ALL + Input (N) + Enter.
TCP/IP GUI Control
The GUI Control software is available on the included CD and at tripplite.com. GUI software is not compatible with Mac OS.
1) Run the dedicated GUI software on the target computer to be used.
2) Set the correct COM port number and the following communication parameters: 9600 bps, 1 start bit, 1 end bit, no
check bit. Set the data format as ASCII and open the serial port.
3) The Matrix Control System has four different tabs. Each one will be explained in the following steps.
7
Operation
Switch Interface: Scene entering and configuring.
Select the inputs and outputs through the IN/OUT area. The selections will be displayed in the table below.
ALL: Shortcut button to select all outputs.
Clear: Clear the contents of the table.
Save: Save the current scene of the table.
Enter: Enter the current scene.
8
Operation
Scene Interface: Scene selection, current scene and recall.
The table on the left side of the interface displays the current scene or the scene that is recalled.
Scene1-12: User saved scenes.
Current: Obtain the current scene of the device.
Save: Save the current obtained scene of the device.
Recall: Recall the last scene selected.
9
Operation
EDID Interface: EDID management.
Set the output resolution of each input as well as the mode.
Source: IN1-8 or IN1-4.
Resolution: See EDID Table for a full list of available options to choose from.
Mode: Set the output mode to either Default or Smart.
10
Setting Interface: RS-232 and TCP/IP Settings.
The default communication mode is the RJ45 Ethernet port. Users can configure the communication mode through the RS-
232 and Net Setting boxes. Click “OK” in the corresponding box to set the desired communication mode, then click “Connect”
to connect. The status bar should change, as shown below.
Operation
11
Operation
RS-232 Control Commands:
1) In the table below, “a” represents Input and “b” represents Output. The number value range of “a” and “b” depends on
the number of inputs and outputs of the controlled matrix. If out of range, it is considered a command input error, and the
unit will not execute the command.
2) Please note there is a punctuation mark “.” at the end of every command. This cannot be omitted.
3) Note the uppercase and lowercase letters.
Control Command Description Instruction/Function
N. Get the number of channels
of the current matrix.
Send the command “N.” and the unit will return
“N8.” with 8 representing 8x8 matrix.
C. Get the current state of the
matrix.
Send the command “C.” If the current state is
11,22,33,44,55,66,78,87,
the unit will return C1X1, 2X2, 3X3, 4X4 ,5X5,
6X6, 7X8, 8X7.
SaXb. Switch Input “a” to Output “b.” Send the command “S1X2.” and the unit will
switch Input 1 to Output 2.
Sa1Xb1, a2Xb2,
a3Xb3.
Switch input a1, a2, a3 to
corresponding output b1, b2, b3.
Send the command “S1X3, 1X4.” and the unit
will switch Input 1 to Output 3, 4.
Mc. Switch between Default and
Smart EDID modes.
“c” = 0 = Default mode
“c” = 1 = Smart mode
Send the command “M1.” and the unit will
switch EDID mode to Smart Mode.
IaEd. Set EDID of Input “a” to EDID
No. “d.”
Send the command “I2E4.” and the unit will set
EDID of Input 2 as EDID No. 4 (See EDID Table)
12
Operation
EDID Table
No. Preset EDID
1 800 x 600/60 Hz
2 1024 x 768/60 Hz
3 1152 x 864/75 Hz
4 1280 x 720/60 Hz
5 1280 x 768/60 Hz
6 1280 x 800/60 Hz
7 1280 x 1024/60 Hz
8 1360 x 768/60 Hz
9 1366 x 768/60 Hz
10 1600 x 900/60 Hz
11 1600 x 1200/60 Hz
12 1680 x 1050/60 Hz
13 1920 x 1080/60 Hz
14 1920 x 1200/60 Hz
15 1920 x 1440/60 Hz
16 2560 x 1080/60 Hz
17 2560 x 1600/60 Hz
18 4K x 2K (444)/30 Hz
19 4K x 2K (420)/60 Hz
20 4K x 2K (8b)/60 Hz
21 4K x 2K (444)/60 Hz
13
Specifications
Models B302-4HX4H-4K / B302-8HX8H-4K
Input (Female) (x4) HDMI / (x8) HDMI
Output (Female) (x4) HDMI / (x8) HDMI
Maximum Resolution 4096 x 2160 @ 60 Hz (4K x 2K)
HDMI Bandwidth 18 Gbps
HDCP Specification HDCP 2.2
Operating Temperature 32° to 113°F (0° to 45°C)
Storage Temperature 14° to 176°F (-10° to 80°C)
Operating Humidity 10% to 85% RH, Non-Condensing
Storage Humidity 5% to 90% RH, Non-Condensing
Power Input DC 12V 3A / DC 12V 4A
Power Consumption 24.2W / 40.5W
Dimensions (H x W x D) 440 x 200 x 44 mm / 440 x 250 x 44 mm
Weight 2477 g / 3145 g
14
Warranty and Product Registration
3-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original
defects in material and workmanship for a period of 3 years from the date of initial purchase. If the prod-
uct should prove defective in material or workmanship within that period, Seller will repair or replace the
product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT,
MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURA-
TION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL
INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an im-
plied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequen-
tial damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great variation, the
manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any
specific application.
Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered
into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Photos and illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
20-05-013 • 93-3CA2_RevA
15
MÁS DE
AÑOS
Manual del Propietario
Switch Divisores de Matriz
HDMI con Extractor de Audio
y Soporte de Resolución
Múltiple
Modelo: B302-4HX4H-4K, B302-8HX8H-4K
1111 W. 35th Street, Chicago, IL 60609, EE UU • tripplite.com/support
Copyright © 2020 Tripp Lite. Todos los derechos reservados.
English 1 • Français 29 • Русский 43
16
B302-4HX4H-4K o B302-8HX8H-4K – Switch Divisor de Matriz HDMI
Control Remoto IR
Cable Receptor IR, 1.22 m [4 pies]
Fuente de Alimentación Internacional (Entrada: 100V ~ 240V)
(x4) Adaptadores de Clavijas Internacionales (Norteamérica, Reino Unido, Europa, Australia)
Accesorios de Instalación
CD de Controladores
Manual del Propietario
Contenido del Empaque
Cables HDMI 2.0 de Alta Velocidad P569-XXX-CERT
Cables de Audio de 3.5 mm Serie P312
Cables Patch Cat6 de Alambre Sólido 24 AWG de la Serie N202
Accesorios Opcionales
Comparte video 100% 4K desde 4 fuentes diferentes de HDMI entre 4 pantallas separadas (B302-4HX4H-4K) u 8 fuentes
diferentes de HDMI entre 8 pantallas separadas (B302-8HX8H-4K)
Muestra cualquier señal de audio y video en cualquier pantalla o la misma señal en todas las pantallas
Soporta resoluciones 4K reales de hasta 4096 x 2160 @ 60 Hz
Transmite audio estéreo analógico
Alterna entre fuentes y pantallas mediante botones en el panel frontal, control remoto IR, comandos seriales RS-232 o
software de control
La compatibilidad con múltiples resoluciones permite la mezcla y combinación de pantallas de diferentes resoluciones
El HDR [High Dynamic Range] permite contraste más rico y precisión de color expandida
La extracción de audio permite la conexión de bocinas, amplificadores o barras de sonido
Características del Producto
17
Los siguientes paneles representan el Switch Divisor de Matriz HDMI 8x8. Es idéntico al modelo 4x4, excepto con 4 puertos
adicionales de entrada y salida.
Descripciones del Panel
1
Entradas HDMI – Conecte hasta 8 dispositivos fuente HDMI.
2
Salidas HDMI – Conecte hasta 8 dispositivos de visualización HDMI.
3
CD 12V – Conecte la fuente de alimentación de 12V CD incluida.
4
Puerto RS-232 – Conecte una PC o laptop para enviar comandos seriales RS-232 a la unidad mediante terminal.
5
Puerto TCP/IP – Conecte una PC o laptop mediante cable Cat6 para controlar en forma remota la unidad mediante GUI.
6
IR EXT – Conecte el Cable receptor IR incluido para recepción de señal IR del Control remoto IR incluido.
7
Salidas de Audio – Conecte hasta 8 juegos de bocinas o amplificadores.
8
Encendido – Switch para encender y apagar la unidad.
1 2 3
4 5 6 7 8
9
Pantalla LCD – Muestra la información y parámetros de la unidad.
10
Selección de Entrada y Salida – Le permite mezclar y combinar cualquier entrada con cualquier salida. Oprima “ALL
para enviar una entrada a todas las pantallas conectadas.
11
Selección de EDID – Le permite configurar la información de EDID para los puertos de entrada y salida.
12
Bloqueo – Bloquea todos los botones del panel frontal para evitar cambios accidentales. Oprima nuevamente “LOCK”
para desbloquear los botones.
13
Enter – Oprima para confirmar los comandos.
14
IR – Receptor de señal IR para el control remoto incluido.
9 10 11 13 14
12
18
Refiérase a los siguientes pasos y diagrama para configurar la instalación de su switch de matriz HDMI.
Nota: Antes de efectuar cualquier conexión, cerciórese que estén apagados todos los dispositivos conectados al switch.
Instalación
1
Conecte hasta 8 (B302-8HX8H-4K) o 4 (B302-4HX4H-4K) fuentes de HDMI al switch con cables suministrados por
el usuario.
2
Conecte hasta 8 (B302-8HX8H-4K) o 4 (B302-4HX4H-4K) Pantallas HDMI al switch con cables suministrados por
el usuario.
3
(Opcional) Conecte hasta 8 (B302-8HX8H-4K) o 4 (B302-4HX4H-4K) bocinas o amplificadores al switch con cables
de audio de 3.5 mm suministrados por el usuario.
4
(Opcional) Conecte una PC o laptop al puerto RS-232 para controlar el switch mediante comandos de RS-232.
5
(Opcional) Para controlar el switch mediante el GUI, conecte una PC o laptop al puerto TCP/IP con un cable Cat6
suministrado por el usuario.
6
(Opcional) Conecte el Cable Receptor IR incluido al puerto IR EXT.
7
Conecte la fuente de alimentación incluida al puerto de 12V CD y conecte la energía usando el switch de alimentación.
Dentro de 20 ~ 30 segundos, cada señal de entrada se mostrará con su puerto de salida correspondiente.
Adaptador de
Corriente de 12V
Pantalla 1 HDMI
4K 60Hz
Pantalla 8 HDMI
4K 60Hz
Amplificador 1
Amplificador 8
Extensor IR
PC Equipada con
RS-232 y RJ45
Fuente 1 HDMI Fuente 8 HDMI
...........
.......
..................
1 234 5 6 7
19
Las siguientes instrucciones son para el Switch Divisor de Matriz HDMI 8x8, pero se aplican por igual al modelo 4x4.
El Switch Divisor de Matriz HDMI Serie B302 cuenta con tres métodos diferentes de control:
1) Botones en el panel frontal
2) Control remoto IR
3) Control de TCP/IP o RS-232 mediante PC o laptop
Botones en el Panel Frontal
La siguiente sección describe cómo cambiar manualmente las entradas y salidas.
1) Para cambiar una entrada a una salida específica, oprima la entrada deseada (IN 1 ~ 8), a continuación, la salida
deseada (OUT 1 ~ 8). Presione “ENTER” para confirmar los nuevos parámetros.
2) Si desea enviar una entrada a más de una pantalla de salida, presione la entrada deseada (IN 1 ~ 8), después las
salidas deseadas (OUT 1 ~ 8). Una vez que haya seleccionado todas las salidas deseadas, oprima “ENTER” para
confirmar los cambios de configuración. Para seleccionar todas las salidas a la vez, presione "ALL".
3) Para preconfigurar la configuración de EDID de salida de una o todas las entradas, oprima la entrada deseada (IN 1
~ 8), después “EDID MENU”. La pantalla LCD mostrará los parámetros de la fuente de entrada como se muestra a
continuación. Presione “UP o DOWN” [Arriba / Abajo] para seleccionar un EDID predeterminado. Consulte la tabla EDID
para obtener una lista de todas las resoluciones predeterminadas. Presione “ENTER” para confirmar la configuración.
4) Para ingresar al Menú de Selección de Modo de salida, presione “UP”. En el menú, los usuarios pueden elegir entre
modo predeterminado y modo inteligente.
a) Predeterminado: Todas las pantallas están predeterminadas a salida 4K x 2K @ 60 Hz o la configuración EDID
definida por el usuario.
b) Inteligente: Obtiene la resolución con la capacidad más baja de las pantallas conectadas.
Para cambiar el modo, presione “DOWN”. De forma predeterminada, la unidad viene preconfigurada en modo
Predeterminado.
Operación
20
Operación
Control Remoto IR
La siguiente sección describe cómo operar el control remoto. “N” indica un valor de número (1 ~ 8).
“+” indica presión continua. No hay botón “+”.
1) El formato de cambio de canales (entradas a salidas) con el control remoto es como sigue:
Entrada (N) + Switch + Salida (N), Entrada (N) + Switch + Salida (N), …. + Enter.
Por ejemplo: Si desea enviar la Entrada 1 a la Salida 2 y la Entrada 2 a la Salida 4,
la secuencia será: Entrada (1) + Switch + Salida (2) + Entrada (2) + Switch
+ Salida (4) + Enter.
2) Para seleccionar múltiples salidas para una entrada, un ejemplo sería:
Entrada (1) + Switch + Salida (2) + Salida (5) + Salida (8) + Enter.
3) ALL” es el botón de acceso directo para seleccionar todos los canales de salida (pantallas).
Funciona de la siguiente manera: ALL + Entrada (N) + Enter.
Control GUI de TCP/IP
El software de Control GUI está disponible en el CD incluido y en tripplite.com. El software GUI no es compatible con Mac OS.
1) Ejecute el software GUI dedicado en la computadora objetivo a usar.
2) Configure el número de puerto COM correcto y los siguientes parámetros de comunicación: 9600 bps, 1 bit de arranque,
1 bit de finalización, sin bit de verificación. Configure el formato de datos como ASCII y abra el puerto serial.
3) El Sistema de Control de Matriz tiene cuatro pestañas diferentes. Cada una se explicará en los siguientes pasos.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Tripp Lite Owner's Manual B302-4HX4H-4K, B302-8HX8H-4K Le manuel du propriétaire

Taper
Le manuel du propriétaire