Panasonic CF-74GCDDDJM Operating Instructions Manual

Marque: Panasonic

Modèle: CF-74GCDDDJM

Catégorie: Des cahiers

Taper: Operating Instructions Manual

Ce manuel convient également à

Please read these instructions carefully before using this product and save this manual for future use.

Contents

Getting Started

Useful Information

Troubleshooting

Getting StartedUseful InformationTroubleshootingAppendix

Appendix

OPERATING INSTRUCTIONS

Personal Computer

Model No. CF-52 series

Introduction.................................................2

Read Me First ..............................................3

Description of Parts .......................................9

First-time Operation .....................................11

On-screen Manual.......................................14

Handling and Maintenance.............................15

Hard Disk Backup Function (Recover Pro)...........17

Hard Disk Data Erase Utility ...........................19

Reinstalling Software....................................20

Error Code/Message ....................................22

Troubleshooting (Basic) ................................23

Hardware Diagnostics...................................27

LIMITED USE LICENSE AGREEMENT..............30

Specifications ............................................32

LIMITED WARRANTY ..................................35

For further information about the com-

puter, you can refer to the on-screen

manual.

To access the on-screen manual

 page 14 “On-screen Manual”

Getting StartedUseful InformationTroubleshootingAppendix

Introduction

Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.

 Terms and illustrations in these instructions

 Some illustrations are simplified to help your understanding and may look different from the actual unit.

 If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

 Refer for the latest information about optional products to the catalogs, etc.

 In these instructions, the names and terms are referred as follows.

• “Microsoft

Windows

XP Professional Service Pack 2 with Advanced Security Technologies” as “Windows” or

“Windows XP”

• “WinDVD™ 5 (OEM Version)” as “WinDVD”

• “B’s Recorder GOLD8 BASIC” as “B’s Recorder”

• “B’s CLiP 6” as “B’s CLiP”

• DVD-ROM & CD-R/RW drive and DVD MULTI drive as “CD/DVD drive”

• Circular media including DVD-ROM and CD-ROM as “discs”

 The display modes are referred as follows.

• Internal LCD (Notebook)

: The computer’s display

• External display (Monitor)

: External display

• Simultaneous display (Intel

Dual Display Clone)

: The same screen is displayed on the internal LCD and the

external display.

• Extended desktop: The extended working area across the internal LCD and the external display.

( ) indicates the terms in [Intel

Graphics Media Accelerator Driver for Mobile] screen. (Only for model with Mobile Intel

GM965 Express Chipsets)

 Copyright

be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.

No patent liability is assumed with respect to the use of the information contained herein.

 Disclaimer

Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd.

assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.

 Trademarks

Microsoft

, Windows

and the Windows logo are registered trademarks of Microsoft Corporation of the United States

and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.

SD Logo is a trademark.

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries.

PhoenixBIOS, Phoenix Always and Recover Pro™ are trademarks and/or registered trademarks of Phoenix Technolo-

gies Ltd.

Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.

WinDVD™ is a trademark of InterVideo, Inc.

Panasonic

is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

own companies.

: Conditions that may result in minor or moderate injury.

: Useful and helpful information.

Enter

: Press [Enter] key.

: Press and hold [Fn] key, and then press [F5] key.

[start] - [Run] : Click [start], and then click [Run]. You may need to double-click in some cases.

 : Page in these Operating Instructions or in the Reference Manual.

: Reference to the on-screen manuals.

CAUTION

NOTE

Getting StartedUseful InformationTroubleshootingAppendix

Read Me First

Federal Communications Commission Radio Fre-

quency Interference Statement

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

 Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral.

Also, any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

FCC RF Exposure Warning:

 This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

 This equipment has been approved for mobile opera-

tion, and unless otherwise advised in separate supple-

mental instructions for individual wireless transmitter(s),

requires minimum 20 cm spacing be provided between

antenna(s) and all person’s body (excluding extremities

of hands, wrist and feet) during wireless modes of oper-

ation.

 This equipment is provided with PC Card slot that could

be used with wireless transmitters, which will be specifi-

cally recommended when they become available.

Other third-party wireless transmitters have not been

RF exposure evaluated for use with this computer and

may not comply with FCC RF exposure requirements.

25-M-4-3

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2)

This device must accept any interference received,

including interference that may cause undesired opera-

tion.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675)

6-M-1

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

1. This equipment complies with CFR47 Part 68 rules.

On the computer is a label that contains, among other

information, the FCC registration number and ringer

equivalence number (REN) for this equipment. If

required, this information must be provided to the tele-

phone company.

2. An FCC compliant telephone cord and modular plug is

provided with this equipment. This equipment is

designed to be connected to the telephone network or

premises wiring using a compatible modular jack

which is Part 68 compliant. See Installation Instruc-

tions for details.

3. The REN is used to determine the quantity of devices

which may be connected to the telephone line. Exces-

sive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In

most, but not all area, the sum of RENs should not

exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as deter-

mined by the total RENs, contact the local telephone

company.

4. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you

in advice that temporary discontinuance of service

may be required. But if advice notice isn’t practical, the

telephone company will notify the customer as soon as

possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it is necessary.

5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could

affect the operation of the equipment. If this happens

the telephone company will provide advance notice in

order for you to make necessary modifications to

maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair

or warranty information, please contact Panasonic

Corporation of North America at DIAL TOLL FREE 1-

800-LAPTOP5 (1-800-527-8675). If the equipment is

causing harm to the telephone network, the telephone

company may request that you disconnect the equip-

ment until the problem is resolved.

7. There are no user serviceable parts contained in this

equipment.

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party

lines is subject to state tariffs.

Models for U.S.A.

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

9. The Telephone Consumer Protection Act of 1991

makes it unlawful for any person to use a computer or

other electronic device to send any message via a

telephone fax machine unless such message clearly

contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission,

the date and time it is sent and an identification of the

business or other entry, or other individual sending the

message and the telephone number of the sending

machine or such business, other entity, or individual. In

order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used.

10.According to the FCC’s electrical safety advisory, we

recommend that you may install an AC surge arrestor

in the AC outlet to which this equipment is connected.

Telephone companies report that electrical surges,

typically lightning transients, are very destructive to

customer terminal equipment connected to AC power

sources and that this is a major nationwide problem.

“Caution : To reduce the risk of fire, use only No.26 AWG

or larger telecommunication line cord.”

“ATTENTION : Pour réduire le risque d’incendie, utiliser

uniquement des conducteurs de télécommunications 26

AWG ou de section supérieure.”

16-M-1

Notice for the products using LCD

This product has a fluorescent lamp that contains mer-

cury. Disposal may be regulated in your community due to

environmental considerations.

For disposal or recycling information, please contact your

local authorities, or the Electronic Industries Alliance:

<http://www.eiae.org/>

24-M-2

For U.S.A.-California Only

This product contains a CR Coin Cell Lithium Battery

which contains Perchlorate Material - special handling

may apply.

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved

modem unit.

The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified equip-

ment. This certification means that the equipment meets tele-

communications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equip-

ment Technical Requirements document(s). The Department

does not guarantee the equipment will operate to the user’s sat-

isfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local telecom-

munications company. The equipment must also be installed

using an acceptable method of connection. The customer

should be aware that compliance with the above conditions may

not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alter-

ations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause

to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility, telephone lines and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas. Caution: Users should not attempt to make such connec-

tions themselves, but should contact the appropriate electric

inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned to

each terminal device provides an indication of the maximum

number of terminals allowed to be connected to a telephone

interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the

sum of the Ringer Equivalence Numbers of all the devices does

not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel

homologué. Cette étiquette certifie que le matériel est con-

forme aux normes de protection, d’exploitation et de sécurité

des réseaux de télécommunications, comme le prescrivent les

documents concernant les exigences techniques relatives au

matériel terminal. Le Ministère n’assure toutefois pas que le

matériel fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est

permis de le raccorder aux installations de l’entreprise locale

de télécommunication. Le matériel doit également être installé

en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la confor-

mité aux conditions énoncées ci-dessus n’empêche pas la

dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coordon-

nées par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à l’utili-

sateur de débrancher un appareil à la suite de réparations ou

de modifications effectuées par l’utilisateur ou à cause de mau-

vais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous

les fils de mise à la terre de la source d’énergie électrique, des

lignes téléphoniques et des canalisations d’eau métalliques, s’il

y en a, sont raccordés ensemble. Cette précaution est particu-

lièrement importante dans les régions rurales. Avertissement:

L’utilisateur ne doit pas tenter de faire ces raccordements lui-

même; il doit avoir recours à un service d’inspection des instal-

lations électriques, ou à un électricien, selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à

chaque dispositif terminal indique le nombre maximal de ter-

minaux qui peuvent être raccordés à une interface. La termi-

naison d’une interface téléphonique peut consister en une

combinaison de quelques dispositifs, à la seule condition que

la somme d’indices d’équivalence de la sonnerie de touts les

dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Models for Canada

Getting StartedUseful InformationTroubleshootingAppendix

Canadian ICES-003

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

7-M-2

Industry Canada

This product complies with RSS210 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including inter-

ference that may cause undesired operation of the device.

30-Ca-1-1

This product (local network devices) for the band 5150-5250

MHz is only for indoor usage to reduce potential for harmful

interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users (mean-

ing they have priority) of 5250-5350 MHz and 5650-5850

MHz and these radars could cause interference and/or

damage to LELAN devices.

30-Ca-2-1

This device has been designed to operate with an antenna

having a maximum gain of 2.15 dB. Antenna having a higher

gain is strictly prohibited per regulations of Industry Canada.

The Required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (EIRP) is not more

than that required for successful communication.

25-Ca-1-1

RF Exposure Warning

This equipment has been approved for mobile operation, and unless

otherwise advised in separate supplemental instructions for individual

wireless transmitter(s), requires minimum 20cm spacing be proved

between antenna(s) and all person’s body (excluding extremities of

hands, wrist and feet) during wireless modes of operation.

Mise en garde concernant l’exposition à l’énergie

radiofréquence

Cet équipement a été homologué pour un fonctionnement

sans fil et, sauf avis contraire inclus dans la notice d’utili-

sation d’un autre émetteur sans fil, une distance minimale

de 20 cm doit être assurée entre l’antenne et le corps de

toute personne (à l’exclusion des mains, poignets et

pieds) pendant le fonctionnement sans fil.

25-M-5-1

<Only for model with a “CE” mark on the bottom of

the computer>

Declaration of Conformity (DoC)

“Hereby, we declare that this Personal

Computer is in compliance with the

essential requirements and other rele-

vant provisions of the Directive 1999/5/

EC.”

Hint:

If you want to get a copy of the original DoC of our prod-

ucts which relates to the R&TTE, please contact our web

address: http://www.doc.panasonic.de

Contact and pursuant to at the directive 2004/108/EC, article 9 (2)

Panasonic Testing Centre

Panasonic Service Europe, a division of

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Germany

Network connection.

The terminal equipment is intended for connection to the

following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks

Technical Features.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

This product is designed to interwork with the Public Switched Tele-

communication Networks in UK, Ireland, Netherlands, Sweden,

Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Ger-

many, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.

18-E-2

When using your telephone equipment, basic safety precau-

tions should always be followed to reduce the risk of fire,

electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near

a bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk

of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the

vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual.

Do not dispose of batteries in a fire. They may explode. Check

with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

19-E-1

Certaines mesures de sécurité doivent être prises pen-

dant l’utilisation de matérial téléphonique afin de réduire

les risques d’incendie, de choc électrique et de blessures.

En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une

baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à

laver, dans un sous-sol humide ou près d’une piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil

sans fil) pendant un orage électrique. Ceci peut présenter

un risque de choc électrique causé par la foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler

une fuite de gaz s’il est situé près de la fuite.

4. Utiliser seulement le cordon d’alimentation et le type de

piles indiqués dans ce manual. Ne pas jeter les piles

dans le feu: elles peuvent exploser. Se conformer aux

règlements pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

19-F-1

Models for Europe

Important Safety Instructions /

Importantes Mesures De Sécurité

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

This product and your Health

This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emit-

ted by this product however is far much less than the

electromagnetic energy emitted by wireless devices like

for example mobile phones.

Because this product operates within the guidelines found in

radio frequency safety standards and recommendations, we

believe this product is safe for use by consumers. These

standards and recommendations reflect the consensus of

the scientific community and result from deliberations of

panels and committees of scientists who continually review

and interpret the extensive research literature.

In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or

responsible representatives of the organization. These sit-

uations may for example include:

 Using this product on board of airplanes, or

 In any other environment where the risk of interference

to other devices or services is perceived or identified

as harmful.

If you are uncertain of the policy that applies on the use of

wireless devices in a specific organization or environment

(e.g. airports), you are encouraged to ask for authoriza-

tion to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer-

ence caused by unauthorized modification of this product.

The correction of interference caused by such unautho-

rized modification will be the responsibility of the user. We

and its authorized resellers or distributors are not liable for

damage or violation of government regulations that may

arise from failing to comply with these guidelines.

26-M-1

Lithium Battery!

This computer contains a lithium battery to enable the

date, time, and other data to be stored. The battery should

only be exchanged by authorized service personnel.

Warning! A risk of explosion from incorrect installation or

misapplication may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui per-

met de sauvegarder certaines données, notamment la

date et l’heure. La pile ne doit être remplacée que par un

technicien qualifié.

Danger ! Risque d’explosion en cas de non respect de

cette mise en garde!

15-F-1

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

12-E-1

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU

L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES

SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À

DES RADIATIONS DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE

RÉPARER SOIMÊME.

CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL

QUALIFIÉ.

12-F-1

12-1-1

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of dis-

posal.

36-M-1

Information to the User

Lithium Battery / Pile au lithium

CD/DVD Drive Caution

Laser safety information is appropriate only when drive

with laser is installed.

12-M-2-1

Les mesures de sécurité relatives au laser ne s’appliquent

que lors de l’installation d’une unité avec laser.

12-F-2-1

Bottom

Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households)

Getting StartedUseful InformationTroubleshootingAppendix

This computer is not intended for use in medical equipment

including life-support systems, air traffic control systems, or other

equipment, devices or systems that are involved with ensuring

human life or safety. Panasonic cannot be held responsible in

any way for any damages or loss resulting from the use of this

unit in these types of equipment, devices or systems, etc.

This computer has been designed so as to minimize shock to the

LCD and hard disk drive, the leakage of liquid (e.g., water) on to

the keyboard, etc., but no warranty is provided against such trou-

ble. Therefore, as a precision instrument, be extremely careful in

the handling.

If a Malfunction Occurs, Immediately Unplug the AC Plug

and the Battery Pack

• This product is damaged

• Foreign object inside this product

• Smoke emitted

• Unusual smell emitted

• Unusually hot

Continuing to use this product while any of the above con-

ditions are present may result in fire or electric shock.

• If a malfunction occurs, immediately turn the power off and

unplug the AC plug, and then remove the battery pack.

Then contact your technical support office.

Do Not Touch This Product and Cable When It Starts Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source Other

Than a Standard Household AC Outlet

Otherwise, a fire due to overheating may result. Connect-

ing to a DC/AC converter (inverter) may damage the AC

adaptor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifically approved for such use.

Do Not Do Anything That May Damage the AC Cord, the AC

Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools,

bend, twist, or pull it forcefully, place heavy objects on it,

or bundle it tightly.

Continuing to use a damaged cord may result in fire, short

circuit, or electric shock.

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, etc.

may cause a defect in the insulation, which may result in a fire.

• Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long

period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, fire due to overheat-

ing or electric shock may result.

• Do not use a damaged plug or loose AC outlet.

Do Not Place Containers of Liquid or Metal Objects on Top

of This Product

If water or other liquid spills, or if paper clips, coins, or for-

eign matter get inside this product, fire or electric shock

may result.

• If foreign matter has found its way inside, immediately

turn the power off and unplug the AC plug and remove

the battery pack. Then contact your technical support

office.

Do Not Disassemble This Product

There are high-voltage areas inside which may give you

an electric shock if you should touch them. Do not touch

the pins and circuit boards inside, and do not allow foreign

matter to enter inside.

Also, remodeling or disassembly may cause a fire.

Keep SD Memory Cards Away from Infants and Small Chil-

dren

Accidental swallowing will result in bodily injury.

In the event of accidental swallowing, see a doctor immediately.

Do Not Place This Product on Unstable Surfaces

If balance is lost, this product may fall over or drop, result-

ing in an injury.

Avoid Stacking

If balance is lost, this product may fall over or drop, result-

ing in an injury.

Do Not Keep This Product Wherever There is a Lot of Water,

Moisture, Steam, Dust, Oily Vapors, etc.

Otherwise, possibly resulting in fire or electric shock.

Do Not Leave This Product in High Temperature Environment

Such as in a Sun-Heated Car, for a Long Period of Time

Leaving this product where it will be exposed to extremely

high temperatures such as in a sun-heated car or in direct

sunlight may deform the cabinet and/or cause trouble in the

internal parts. Continued use in such a resulting condition

may lead to short-circuiting or insulation defects, etc. which

may in turn lead to a fire or electric shocks.

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a fire.

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a

fire or electric shock.

Do Not Move This Product While the AC Plug Is Connected

The AC cord may be damaged, resulting in fire or electric shock.

• If the AC cord is damaged, unplug the AC plug immediately.

Use Only the Specified AC Adaptor With This Product

Using an AC adaptor other than the one supplied

(attached to your product or supplied by Panasonic) may

result in a fire.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being

dropped may result in electric shock, short circuit, or fire.

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detri-

mental health effects on the eyes or hands.

Do Not Look into the CD/DVD Drive

Looking directly at the internal laser light source may

result in damage to eyesight.

Do Not Use Discs That Are Cracked or Deformed

Because the discs rotate at high speeds, damaged discs

may break apart causing injury.

• Discs that are not round and discs that have been

repaired using adhesives are similarly dangerous, and

so should not be used.

Do Not Turn the Volume Up to Loud When Using Head-

phones

Listening at high volumes that overstimulate the ear for

long periods of time may result in loss of hearing.

Precautions

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR

AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR

TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIR-

CRAFT COCKPIT EQUIPMENT/SYSTEMS

. PANA-

SONIC WILL NOT BE RESPONSIBLE FOR ANY

LIABILITY RESULTING FROM THE USE OF THIS

PRODUCT ARISING OUT OF THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2

Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of flight (e.g., during take-off and

landing) and/or mounted on to the aircraft. Class1 EFB Systems

and 2 EFB Systems are defined by FAA: AC (Advisory Circular)

120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

Panasonic cannot guarantee any specifications, tech-

nologies, reliability, safety (e.g. Flammability/Smoke/

Toxicity/Radio Frequency Emission, etc) requirements

related to aviation standards that exceed the specifica-

tions of our COTS (Commercial-Off-The-Shelf) products.

39-E-1

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

Use the Modem With a Regular Telephone Line

Connection to an internal phone line (on-premise switches) of a

company or business office, etc. or to a digital public phone or

use in a country or area not supported by the computer may

result in a fire or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable Other

Than the One Specified, into the LAN Port

If the LAN port is connected to a network such as the ones listed

below, a fire or electric shock may result.

• Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T

• Phone lines (IP phone, Telephone lines, internal phone lines

(on-premise switches), digital public phones, etc.)

Do Not Use With Exposing the Skin to This Product For a

Long Period of Time

Using this product with exposing the skin to the heat source of

this product or AC adaptor for a long period of time can cause a

low-temperature burn.

 Do not place the computer near a television or radio

receiver.

 Keep the computer away from magnets. Data stored

on the hard disk may be lost.

Do Not Use With Any Other Product

The battery pack is rechargeable and was intended for

the specified product. If it is used with a product other

than the one for which it was designed, electrolyte leak-

age, generation of heat, ignition or rupture may result.

Do Not Charge the Battery Using Methods Other Than

Those Specified

If the battery is not charged using one of the specified

methods, electrolyte leakage, generation of heat, ignition

or rupture may result.

Do Not Throw the Battery Pack into a Fire or Expose It

to Excessive Heat

Generation of heat, ignition or rupture may result.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight,

for Example)

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects into the Battery Pack,

Expose It to Bumps or Shocks, Disassemble, or Mod-

ify It

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Short the Positive (+) and Negative (-) Con-

tacts

Generation of heat, ignition or rupture may result. Do not

place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing.

Do Not Use This Product With a Battery Pack Other

Than the One Specified

Use only the specified battery pack (CF-VZSU43AU) with

your product. Use of battery packs other than those man-

ufactured and supplied by Panasonic may present a

safety hazard (generation of heat, ignition or rupture).

 Do not touch the terminals on the battery pack. The

battery pack may no longer function properly if the

contacts are dirty or damaged.

 Do not expose the battery pack to water, or allow it to

become wet.

 If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery pack until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

 This computer prevents overcharging of the battery by

recharging only when the remaining power is less than

approx. 95% of capacity.

 The battery pack is not charged when the computer is

first purchased. Be sure to charge it before using it for

the first time. When the AC adaptor is connected to the

computer, charging begins automatically.

 Should the battery leak and the fluid get into your

eyes, do not rub your eyes. Immediately flush your

eyes with clear water and see a doctor for medical

treatment as soon as possible.

NOTE

 The battery pack may become warm during recharging

or normal use. This is completely normal.

 Recharging will not commence if internal temperature

of the battery pack is outside of the allowable tempera-

ture range (0 °C to 50 °C {32°F to 122°F}) ( Ref-

erence Manual “Battery Power”). Once the allowable

range requirement is satisfied, charging begins auto-

matically. Note that the recharging time varies based

on the usage conditions. (Recharging takes longer

than usual when the temperature is 10 °C {50°F} or

below.)

 If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable tem-

perature range.

 This computer has a high temperature mode function

that prevents the degradation of the battery in high

temperature environments. ( Reference Manual

“Battery Power”) A level corresponding to a 100%

charge for high temperature mode is approximately

equivalent to an 80% charge level for normal tempera-

ture mode.

 The battery pack is a consumable item. If the amount

of time the computer can be run by using a particular

battery pack becomes dramatically shorter and

repeated recharging does not restore its performance,

the battery pack should be replaced with a new one.

 When transporting a spare battery inside a package,

briefcase, etc., it is recommended that it be placed in a

plastic bag so that its contacts are protected.

 Always power off the computer when it is not in use.

Leaving the computer on when the AC adaptor is not

connected will exhaust the remaining battery capacity

( Reference Manual “LAN”).

Precautions (Battery Pack)

Getting StartedUseful InformationTroubleshootingAppendix

Description of Parts

A : Speaker

 Reference Manual “Key Combinations”

B : Multimedia pocket

 Reference Manual “Multimedia Pocket”

C : SD Memory Card slot

 Reference Manual “SD Memory Card”

D : Battery pack

E : Headphone jack

You can connect headphones or amplified speakers.

When they are connected, audio from the internal

speakers is not heard.

F : Microphone jack

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur as a result.

• When recording in stereo using a stereo microphone:

Click [start] - [All Programs] - [SoundMAX] - [Control

Panel] and select [Microphone], and then add a

check mark for [No Filtering] in [Microphone

Enhancements].

• When using a monaural microphone with a 2-terminal plug:

Click [start] - [All Programs] - [SoundMAX] - [Control Panel]

and select [Microphone], and then add a check mark for

[Voice Recording] in [Microphone Enhancements].

Otherwise, only audio on the left track will be recorded.

G : Wireless LAN antenna

 Reference Manual “Wireless LAN”

H : LCD

I : LED indicator

Caps lock

Numeric key (NumLk)

Scroll lock (ScrLk)

Multimedia pocket device status

 Reference Manual “Multimedia Pocket”

Hard disk drive status

Power status

(Off: Power off/Hibernation, Green: Power on, Blink-

ing green: Standby, Blinking green rapidly: Cannot

power on or resume due to low temperature.)

Battery status

 Reference Manual “Battery Power”

SD Memory Card status

(Blinking: During access or a password is requested)



Reference Manual “SD Memory Card”

Wireless ready

This indicator lights when Wireless LAN, Blue-

tooth, and/or Wireless WAN are connected and

ready. It does not necessarily indicate the On/Off

condition of the wireless connection.



Reference Manual “Wireless LAN” “Bluetooth”

“Disabling/Enabling Wireless Communication”

Wireless WAN status



Refer to the instruction manual of the wireless

device

J : Power switch

K : Function key

 Reference Manual “Key Combinations”

L : Bluetooth antenna

 Reference Manual “Bluetooth”

M : Keyboard

N : Touch pad

O :Carrying handle

P :Wireless switch

 Reference Manual “Disabling/Enabling Wire-

less Communication” “Wireless LAN” “Bluetooth”

Getting Started

Description of Parts

A : Hard disk drive

 Reference Manual “Hard Disk Drive”

B : Smart Card slot

 Reference Manual “Smart Card”

C : ExpressCard slot

 Reference Manual “PC Card / ExpressCard”

D :PC Card slot

 Reference Manual “PC Card / ExpressCard”

E : IEEE 1394 interface connector

 Reference Manual “IEEE 1394 Devices”

F : USB port

 Reference Manual “USB Devices”

G : DC-IN jack

H : External display port

 Reference Manual “External Display”

I : Security lock

A Kensington cable can be connected.

For further information, read the manual that comes

with the cable.

J : Ventilation hole

K : Modem port

 Reference Manual “Modem”

L : LAN port

 Reference Manual “LAN”

M : Serial port

N : Expansion bus connector

 Reference Manual “Port Replicator”

O : RAM module slot

 Reference Manual “RAM Module”

P : Hard disk drive latch

 Reference Manual “Hard Disk Drive”

Q : Multimedia pocket release button

 Reference Manual “Multimedia Pocket”

R : Battery latch

NOTE

 When you open the covers

of ExpressCard slot, PC

card slot, IEEE 1394

interface connector, USB

port, External display port,

Modem port, LAN port and

Serial port, push down and

pull the covers.

A lithium ion battery that is recyclable

powers the product you have pur-

chased.

Please call 1-800-8-BATTERY for

information on how to recycle this bat-

tery.

L’appareil que vous vous êtes procuré

est alimenté par une batterie au lith-

ium-ion.

Pour des renseignements sur le recy-

clage de la batterie, veuillez com-

poser le 1-800-8-BATTERY.

48-M-1

EX PC 1394

LOCK

HJIKLM

CDBG

Right side

Rear side Bottom

(Example: USB port cover)

Getting StartedUseful InformationTroubleshootingAppendix

First-time Operation

 Preparation

A Check and identify the supplied accessories.

If you do not find the described accessories, contact Panasonic Technical Support ( page 36).

 You will need the serial number when you reinstall B’s Recorder/B’s CLiP using Product Recovery DVD-ROM

( page 26).

Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging (



page 30).

A Reverse the computer, then press and hold the mark part (A).

B Slide and remove the cover.

C Insert the battery pack (B) until it securely fits the connector.

D Slide the cover back.

 To remove the battery pack

In step

above, slide and hold the latch (C), and pull the tab (D) of the battery pack.

CAUTION

 Make sure the cover is securely attached. Otherwise the battery pack may fall

when you carry the computer.

 Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery

pack and the computer.

 Be sure to attach the cover for use.

The battery charging starts automatically.

CAUTION

 Do not disconnect the AC adaptor and do not switch the wireless switch to on

until the first-time operation procedure is completed.

 When using the computer for the first time, do not connect any peripheral device

except the battery pack and AC adaptor.

 Handling the AC adaptor

Problems such as sudden voltage drops may arise during periods of thunder and

lightning. Since this could adversely affect your computer, an uninterruptible

power source (UPS) is highly recommended unless running from the battery

pack alone.

• AC Adaptor . . . . . . 1

Model No: CF-AA1683A

• AC Cord . . . . . . . . 1 • Battery Pack . . . . . 1

Model No: CF-VZSU29A

• Modem Telephone

Cable . . . . . . . . . . . 1

• Product Recovery DVD-ROM . . . . . . . . . . . . . . . 1

• Operating Instructions (This book) . . . . . . . . . . 1

• Windows

Book . . . . . . . . . . . . . . . . . . . . . . . . . 1

1 Insert the battery pack.

2 Connect your computer to a power outlet.

Getting Started

First-time Operation

A Pull the carrying handle forward.

B Lift up the latch (A) and lift open the display.

C Confirm the wireless switch (B) is OFF.

D Press and hold the power switch for approximately one second until the

power indicator lights.

CAUTION

 Do not press the power switch repeatedly.

 The computer will be forcibly turned off if you press and hold the power switch for

four seconds or longer.

 Once you turn off the computer, wait for ten seconds or more before you turn on

the computer again.

 Do not perform the following operation until the hard disk drive indicator

turns off.

• Connecting or disconnecting the AC adaptor

• Pressing the power switch

• Touching the keyboard, touch pad or external mouse

• Closing the display

• Turn on/off the wireless switch

 When the CPU temperature is high, the computer may not start up to prevent

overheating of the CPU. Wait until the computer cools down, and then turn the

power on again. If the computer does not power on even after cooling down,

contact Panasonic Technical Support ( page 36).

A Follow the on-screen instructions.

CAUTION

 When you set date/time/time zone and click [Next], the screen may not go to the

next step for a few minutes. Do not touch the keyboard or touch pad, and wait

until the screen changes.

 If “An unexpected error has occurred …” (or a similar message) is displayed,

click [OK]. This is not a malfunction.

 Wait until the hard disk drive indicator has turned off.

 This computer periodically records the management information including the

hard disk information such as number of hours powered-on, number of times

powered-on, internal temperature, replacement sector. The maximum data vol-

ume for each record is 750 byte. These information are only used for estimating

the cause when the hard disk goes down by any possibility. They are never sent

to outside via network nor used for any other purpose except for the purpose

described the above.

To disable the function, add the check mark for [Disable the automatic save func-

tion for management information history] in [Hard Disk Status] of PC Information

Viewer, and click [OK].

( Reference Manual “Checking the Computer’s Usage Status”)

A Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

CAUTION

 Remember your password. If you forget the password, you cannot use the Win-

dows operation system. Creating a password reset disk beforehand is recom-

mended.

3 Turn on the computer.

4 Setup Windows.

5 Create a new account.

Getting StartedUseful InformationTroubleshootingAppendix

NOTE

 Regarding Windows XP

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs

on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

 Windows Update

You can update to the latest patches and service packs for Windows with the following menus.

Click [start] - [All Programs] - [Windows Update].

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required,

contact Panasonic Technical Support ( page 36).

 If the message “Your computer might be at risk” is displayed

Select (red icon) on the notification area and make the appropriate settings. The Windows Security Center regu-

larly gives you notice so that you can make the optimum settings.

This is not an error message and you can use the computer. However, making appropriate measures is recom-

mended to reduce the risk of virus and other attacks.

 To conserve power, the following power saving methods are set at the time of purchase.

• The screen automatically turns off after 15 minutes of inactivity.

• The computer goes automatically into standby mode

after 20 minutes of inactivity.

Refer to Reference Manual “Standby or Hibernation Functions” of your computer about resuming from standby.

 Power Consumption in each mode is as follows.

When the screen is off: <CF-52A/B series> 18 W, <CF-52C/D series> 13 W

In standby: 2 W

The battery pack is fully charged (or not being charged) and the computer is off: 0.9 W

 Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully

charged, the battery will be fully discharged in the following period of time:

When power is off: 8 weeks

In standby: 3 days

In hibernation: 6 days

If “Wake up from LAN” is disabled, the period of time in standby will become slightly longer, and the period of time in

hibernation will become about the same as during power-off.

Getting StartedUseful InformationTroubleshootingAppendix

On-screen Manual

You can access the Reference Manual and the Important Tips on the computer screen.

When you access the Reference Manual and the Important Tips for the first time, the License Agreement of the Adobe

Reader may be displayed. Read it carefully and select [Accept] to proceed.

 Reference Manual

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

To access the Reference Manual:

A Click [start] - [Reference Manual].

 Important Tips

The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum

condition to obtain longer operation time.

To access the Important Tips:

A Double-click on the desktop.

 Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

NOTE

 When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update.

See http://www.adobe.com/ for the latest version of Adobe Reader.

Contents

 Key Combinations

 Standby or Hibernation Functions

 Security Measures

 Battery Power

 Multimedia Pocket

 CD/DVD Drive

 WinDVD

 B’s Recorder/B’s CLiP

 PC Card / ExpressCard

 SD Memory Card

 SD Security

 Smart Card

 RAM Module

 Port Replicator

 External Display

 USB Devices

 IEEE 1394 Devices

 Modem

 LAN

 Disabling/Enabling Wireless Com-

munication

 Wireless LAN

 Bluetooth

 Hard Disk Drive

 Setup Utility

 Icon Enlarger

 Loupe Utility

 DMI Viewer

 Recover Pro

 Technical Information

 Troubleshooting (Advanced)

Getting StartedUseful InformationTroubleshootingAppendix

Handling and Maintenance

 Place the computer on a flat stable surface. Do not place the computer upright or turn it over. If the computer is

exposed to an extremely strong impact, it may become inoperable.

 Temperature: Operation : 5 °C to 35 °C {41 °F to 95 °F}

Storage : -20 °C to 60 °C {- 4 °F to 140 °F}

Humidity: Operation : 30% to 80% RH (No condensation)

Storage : 30% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in

the product deterioration and will shorten the product life.

 Do not place the computer in the following areas, otherwise the computer may be damaged.

• Near electronic equipment. Image distortion or noise may occur.

• In extremely high or low temperature.

 As the computer can become hot during operation, keep it away from items that are sensitive to heat.

This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a drip-

proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when handling

the computer.

 When carrying the computer:

• Turn off the computer.

• Remove all external devices, cables, PC Cards and other protruding things.

• Remove a disc in the CD/DVD drive.

• Do not drop or hit the computer against solid objects.

• Do not leave the display open.

• Do not grip the display part.

 Do not put anything (e.g., a piece of paper) between the display and keyboard.

 When you board an airplane, take the computer with you and never put it in your checked luggage. When using the

computer on airplane, follow the airline’s instructions.

 When carrying a spare battery, put it in a plastic bag to protect its terminals.

 The touch pad is designed to be used with a finger tip. Do not place any object on its surface and do not press down

strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

 Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

 Be careful not to get injured by dropping down or getting hit when carrying the computer.

 This computer contains a magnet and magnetic products at the locations circled in the

illustration at right. Avoid leaving metallic object or magnetic media in contact with

these areas.

 When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices.

Carefully read the instruction manuals of the peripheral devices.

 Use the peripheral devices conforming to the computer’s specifications.

 Connect to the connectors in the correct direction.

 If it is hard to insert, do not try forcibly but check the connector’s shape, direction,

alignment of pins, etc.

 If screws are included, fasten them securely.

 Remove the cables when you carry the computer. Do not pull the cables forcibly.

 Preventing your computer from unauthorized use via wireless LAN/Bluetooth/Wireless WAN

 Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings such as data encryp-

tion.

Operation Environment

Handling Cautions

Handling and Maintenance

Getting StartedUseful InformationTroubleshootingAppendix

 Computrace

Software

Computrace

software tracks your stolen computer.

Perform the following steps before installing Computrace

software.

 Computrace

software is not included or installed in this computer.

CAUTION

 You will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change

the setting when not used.

• Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs to

the motherboard, etc. have been made.

NOTE

 Consult Absolute Software Corp. before disposal.

 Refer to the following URL for Computrace

software for installation and available service regions. Note that this

service is only available in certain regions.

http://www.absolute.com

1 Turn on or restart the computer, and press

while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.

 If the password is requested, enter the Supervisor Password.

2 Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press

Enter

3 Select [Computrace (R) BIOS Module], and set to [Enable].

4 At the confirmation message, select [Execute] and press

Enter

5 At the reconfirmation message, select [Execute] and press

Enter

6 Press

F10

At the confirmation message, select [Yes] and press

Enter

The computer restarts.

To clean the LCD panel

 Do not use water to clean the panel. Ingredients included in water may leave scratches and reduce readability of the

screen.

 To remove dust or dirt, do not use a cloth to rub it off since it may leave scratch on the screen.

Use a fine brush to sweep dust or dirt, then wipe with a dry soft glass-cleaning cloth.

 To clean the oily surface, use a soft gauze dipped in camera lens cleaner, and then wipe with a dry soft glass-clean-

ing cloth.

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it

thoroughly.

CAUTION

 Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to

the surface.

 Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

Maintenance

Getting StartedUseful InformationTroubleshootingAppendix

Hard Disk Backup Function (Recover Pro)

The Recover Pro creates a backup area (storage area) on the hard disk to back up (store) the hard disk data, and

restores the backup data to its original location when it is lost or corrupted by operational errors or other factors. You do

not need external media or peripheral devices to back up or restore hard disk data on this computer.

At purchase, the Recover Pro is not installed. Install using the instructions below.

The Recover Pro provides 3 types of backup as follows:

 Quick Backup: Scheduled backup of the updated data

 File Backup: File backup at file save and change

 Complete Backup: Backup of the entire data on the internal hard disk

Here, we will explain the procedures for installation, complete backup (backing up hard disk contents in case Windows

cannot be booted), and complete restore (recovering the hard disk data to its condition at the time of the complete

backup).

For further information, refer to the software’s online manual ( page 18).

CAUTION



All operations should be executed with the AC adaptor connected. Do not turn the power off while operations are in progress.

If the power is turned off while installation, backup, or restore operations are in progress, these operations may not function

properly, and it may be impossible to start Windows. Also, do not press any keys or slide any switches, including hot keys.

 When restarting the computer, the message “Check file system on C:” may appear. Follow the on-screen instruc-

tions. Do not skip the check process.

 Make sure you allow enough space on the hard disk when choosing settings during installation. To change these

settings you must reinstall Recover Pro.

To execute Complete Backup reliably, we recommend performing [Typical] installation in the following cases.

• Hard disk with a single partition

• Immediately after reinstalling software (when more than half of the entire space of the hard disk is available)

( page 20)

 Be sure to use the internal hard disk drive to create the backup area. Never use disk or device other than the internal

hard disk drive.

 Some software (security software, backup software, encryption software, or hard disc accessible specific software,

etc.) may be incompatible with Recover Pro.

For further information, refer to:

http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/Recover+Pro/default.htm

 When using Personal Secure Drive ( Installation Manual of “Trusted Platform Module (TPM)”), do not execute

File Backup for Personal Secure Drive.

 The “Create recovery CD-DVD” function in Recover Pro is designed to help you save complete backup data to CD or

DVD. When using the “Create recovery CD-DVD”, you can view the complete backup data on the hard disk, but take

care to avoid accidentally deleting this data.

Preparation

 Connect the AC adaptor.

1 Log on to Windows as an administrator.

2 Close all programs.

3 Disable anti-virus software.

4 Click [start] - [Run], enter [c:\util\rcvpro\setup.exe], and click [OK].

The InstallShield Wizard screen appears.

5 Click [Next].

Follow the on-screen instructions.

Carefully read the License Agreement, and click [I accept the agreement.]

 The computer restarts several times to complete installation. appears in the notification area.

The Recover Pro cannot back up or restore data correctly if a hard disk problem occurs during data backup or restor-

ing. If an error occurs due to an unexpected malfunction, incorrect operation, or other reason while data is being

restored, the hard disk data (data before restoration) may be lost.

Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as a

result of the use of this function.

Installation

Hard Disk Backup Function (Recover Pro)

Getting StartedUseful InformationTroubleshootingAppendix

CAUTION

 During the installation, the screen may become black (no display) momentarily. This is not a malfunction.

 If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the

backup area.

 You cannot change the size of backup area after creation.

Backs up all data on the hard disk.

Preparation

 Connect the AC adaptor.

1 Log on to Windows as an administrator.

2 Close all programs.

3 Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Recover Pro 6].

“Recover Pro 6” screen appears.

4 Click [Complete Backup], and click [Yes].

 The computer restarts, and “Recover Pro 6” screen appears.

Follow the on-screen instructions.

NOTE

 You can completely backup only one set of the whole data in the hard disk to the backup area.

 Do not touch the power switch while using the Recover Pro.

This function uses the data created during complete backup. It restores the hard disk data to the condition when you

performed the complete backup. Files created and changes made to settings after the latest complete backup is made

will be deleted.

Preparation

 Connect the AC adaptor.

1 Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Always Launcher], and

click [Run].

 The computer restarts, and “Phoenix Always” screen appears.

Alternatively turn on or restart the computer, and hold down

while [Panasonic] boot screen is displayed until

“Phoenix Always” screen appears.

2 Click [Protect / Recover], and click [Phoenix Recover Pro 6].

 “Recover Pro 6” screen appears.

3 Click [Complete Restore].

Follow the on-screen instructions.

NOTE

 Do not touch the power switch while using the Recover Pro.

 To access the online manual

A Click [start] - [All Programs] - [Phoenix Applications] - [Docs], and double-click [UserGuides].

B Double-click the file of Recover Pro user’s guide or Phoenix Always user’s guide.

Complete Backup

Complete Restore

Getting StartedUseful InformationTroubleshootingAppendix

Hard Disk Data Erase Utility

When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage.

Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some

special software. Use the hard disk data erase utility to erase the data completely.

Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software’s

license agreement.

CAUTION

 When the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well.

NOTE

 Even if hard disk data erase is performed, the number of times of DVD’s region code setting will not be reset.

 This utility cannot erase data for specific partitions.

Preparation

 Prepare the following items:

• The Product Recovery DVD-ROM (included)

• Panasonic CD/DVD drive (included)

 Remove all peripherals (except for the CD/DVD drive).

 Connect the AC adaptor and do not remove it until hard disk data erase is complete.

1 Turn off the computer and insert the CD/DVD drive into the multimedia pocket

( Reference Manual “Multimedia Pocket”).

2 Turn on the computer, and press

several times while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.

 If the password is requested, enter the Supervisor Password.

3 Select the [Boot] menu, then select [IDE MP] and press

until [IDE MP] is at the top of

the boot priority order.

4 Select the [Security] menu and set [DVD Operation] to [Enable].

5 Set the Product Recovery DVD-ROM into the CD/DVD drive.

6 Press

F10

At the confirmation message, select [Yes] and press

Enter

The computer restarts.

7 Press

to execute [2. [Erase HDD]].

 To cancel this operation, press

8 At the confirmation message, press

9 When [<<< Start menu >>>] is displayed, press

Enter

The approximate time required for erasing data will be displayed.

10 Press

Space

At the confirmation message, press

Enter

The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted.]

message will appear. If a problem has occurred during the operation, an error message will appear.

 To cancel partway, press

Ctrl

. The data erasure will be up to that point.

11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter.

The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-

tions or other operational errors, data may not be completely erased. There are also specialized devices that may be

able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-

mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no

responsibility for losses or damages suffered as a result of the use of this utility.

Getting StartedUseful InformationTroubleshootingAppendix

Reinstalling Software

Preparation

 Prepare the following items:

• The Product Recovery DVD-ROM (included)

• Panasonic CD/DVD drive (included)

 Remove all peripherals (except for the CD/DVD drive).

 Connect the AC adaptor and do not remove it until reinstallation is complete.

NOTE

 Even if reinstallation is performed, the number of times of DVD’s region code setting will not be reset.

 If you have installed the Recover Pro ( page 17),

• Select [1] or [2] in the step 10 below. If you select [3], the Recover Pro will no longer function properly.

• Only when you want to save the data which you stored in the separate partitions other than the first partition and

the Recover Pro backup area, select [3] in the step 10 below and perform the following steps.

A After reinstallation, backup the data to external media (e.g., removable disc).

B Perform the reinstallation procedure again, and select [1] or [2] in the step 10.

C Return the data backed up in external media to the internal hard disk.

1 Turn off the computer and insert the CD/DVD drive into the multimedia pocket

( Reference Manual “Multimedia Pocket”).

2 Turn on the computer, and press

several times while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.

 If the password is requested, enter the Supervisor Password.

3 Write down all of the contents of the Setup Utility and press

At the confirmation message, select [Yes] and press

Enter

4 Select the [Boot] menu, then select [IDE MP] and press

until [IDE MP] is at the top of

the boot priority order.

5 Select the [Security] menu and set [DVD Operation] to [Enable].

6 Set the Product Recovery DVD-ROM into the CD/DVD drive.

7 Press

F10

At the confirmation message, select [Yes] and press

Enter

The computer will restart.

8 Press

to execute [1. [Recovery]].

The License Agreement screen appears.

 To cancel partway, press

9 Press

to select [1. Yes, I agree to the provisions above and wish to continue!].

10 Select the settings.

 [2]: Enter the size of operating system partition and press

Enter

(The size of data partition will be determined by subtracting the operating system partition size from the

maximum size.)

[3]: Windows will be installed in the first partition.

(The size of the first partition must be 20 GB or more. If smaller, installation will not be possible.)

At the confirmation message, press

Reinstallation starts automatically. (It will take approximately 30 - 60 minutes.)

 Do not interrupt reinstallation, for example by turning off the computer or pressing

Ctrl

Alt

Del

. Other-

wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.

11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter.

Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk

data including the backup data of the Recover Pro will be erased.

Back up important data to other media or an external hard disk before reinstallation.

La page charge ...

Panasonic CF-74GCDDDJM Operating Instructions Manual

Marque: Panasonic

Modèle: CF-74GCDDDJM

Catégorie: Des cahiers

Taper: Operating Instructions Manual

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Panasonic CF-74GCDDDJM

Panasonic CF-74GCDDDJM Operating Instructions Manual

Ce manuel convient également à

Panasonic CF-74GCDDDJM Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents