Panasonic CF-19K4RAX2M Manuel utilisateur

Marque: Panasonic

Modèle: CF-19K4RAX2M

Taper: Manuel utilisateur

Contents

Getting Started

OPERATING INSTRUCTIONS

Personal Computer

Model No.

CF-19

series

Introduction .................................................................

Read Me First .............................................................

Description of Parts ..................................................

First-time Operation ..................................................

Useful Information

On-screen Manual ....................................................

Handling and Maintenance .......................................

Hard Disk Backup Function (Recover Pro) ..............

Hard Disk Data Erase Utility .....................................

Reinstalling Software ................................................

Troubleshooting

Error Code/Message ................................................

Troubleshooting (Basic) ............................................

Hardware Diagnostics ..............................................

Appendix

LIMITED USE LICENSE AGREEMENT ...................

Speciﬁ cations ...........................................................

LIMITED WARRANTY ..............................................

Please read these instructions carefully before using this product and save this manual for future use.

For further information about the com-

puter, you can refer to the on-screen

manual.

To access the on-screen manual

page 16 “On-screen Manual”

Getting StartedUseful InformationTroubleshootingAppendix

Introduction

Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.



Terms and illustrations in these instructions

Getting Started

CAUTION

: Conditions that may result in minor or moderate injury.

NOTE

: Useful and helpful information.

Enter

: Press [Enter] key.

: Press and hold [Fn] key, and then press [F5] key.

[start] - [Run] : Click [start], and then click [Run]. You may need to double-click in some cases.



: Page in these Operating Instructions or in the Reference Manual.

: Reference to the on-screen manuals.



Some illustrations are simpliﬁed to help your understanding and may look different from the actual unit.



If you do not log on as an administrator, you cannot use some functions or cannot display some screens.



Refer for the latest information about optional products to the catalogs, etc.



In these instructions, the names and terms are referred as follows.



“Microsoft

Windows

XP Professional Service Pack 2 with Advanced Security Technologies” as “Windows”, “Win-

dows XP” or “Windows XP Professional”



“Microsoft

Windows

XP Tablet PC Edition 2005” as “Windows”, “Windows XP” or “Windows XP Tablet PC Edi-

tion”



DVD-ROM & CD-R/RW drive, and DVD MULTI drive as “CD/DVD drive”



Circular media including DVD-ROM and CD-ROM as “discs”



The display modes are referred as follows. ( ) indicates the terms in [Intel

Graphics Media Accelerator Driver for

Mobile] screen. To display the screen, click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA

Driver for Mobile].



Internal LCD (Notebook): The computer’s display



External display (Monitor): External display



Simultaneous display (Intel

Dual Display Clone): The same screen is displayed on the internal LCD and the ex-

ternal display.



Extended desktop: The extended working area across the internal LCD and the external display.



may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.

No patent liability is assumed with respect to the use of the information contained herein.



Disclaimer

Computer speciﬁcations and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. as-

sumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.



Trademarks

Microsoft

, Windows

, the Windows logo and IntelliMouse are registered trademarks of Microsoft Corporation of the

United States and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.

SD Logo is a trademark.

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries.

PhoenixBIOS, Phoenix Always and Recover Pro are trademarks and/or registered trademarks of Phoenix Technolo-

gies Ltd.

Bluetooth

™

is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.

Panasonic

is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

own companies.

Read Me First

Models for U.S.A.

Federal Communications Commission Radio Fre-

quency Interference Statement

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one

or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and

receiver.



Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.



Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral.

Also, any changes or modiﬁcations not expressly ap-

proved by the party responsible for compliance could void

the user’s authority to operate this equipment.

FCC RF Exposure Warning:



This equipment is provided with PC Card slot that could

be used with wireless transmitters, which will be speciﬁ-

cally recommended when they become available.

Other third-party wireless transmitters have not been

RF exposure evaluated for use with this computer and

may not comply with FCC RF exposure requirements.



This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.



This equipment has been approved for portable operation,

and unless otherwise advised in separate supplemental

instructions for individual wireless transmitter(s), requires

minimum 1.5 cm spacing be provided between antenna(s)

and all person’s body (excluding extremities of hands,

wrist and feet) during wireless modes of operation.



This equipment may use multiple installed transmitters,

which may be capable of simultaneous transmission.



This equipment is provided with external antenna

connector(s) for connection to optional Car Mounter or

Port Replicator for mobile external mounted antenna(s).

External antenna(s) must be professionally installed and

cannot exceed recommended maximum antenna gain as

described in individual provided supplement instructions

for wireless transmitters. Also, user must maintain mini-

mum 20 cm spacing between external antenna(s) and all

person’s body (excluding extremities of hands, wrist and

feet) during wireless modes of operation.

This product is restricted to indoor use due to its operation in

the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for the fre-

quency range 5.15 to 5.25 GHz to reduce the potential for

harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25

to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations

can cause interference with and/or damage this product.

25-M-1-1

This device complies with Part 15 of the FCC Rules. Op-

eration is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired op-

eration.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675)

6-M-1

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

1. This equipment complies with CFR47 Part 68 rules.

On the computer is a label that contains, among other

information, the FCC registration number and ringer

equivalence number (REN) for this equipment. If re-

quired, this information must be provided to the tele-

phone company.

2. An FCC compliant telephone cord and modular plug

is provided with this equipment. This equipment is

designed to be connected to the telephone network

or premises wiring using a compatible modular jack

which is Part 68 compliant. See Installation Instruc-

tions for details.

3. The REN is used to determine the quantity of devices

which may be connected to the telephone line. Ex-

cessive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In

most, but not all area, the sum of RENs should not ex-

ceed ﬁve (5.0). To be certain of the number of devices

that may be connected to a line, as determined by the

total RENs, contact the local telephone company.

4. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you

in advice that temporary discontinuance of service

may be required. But if advice notice isn’t practical, the

telephone company will notify the customer as soon

as possible. Also, you will be advised of your right to

ﬁle a complaint with the FCC if you believe it is neces-

sary.

5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could

affect the operation of the equipment. If this happens

the telephone company will provide advance notice

in order for you to make necessary modiﬁ cations to

maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair

or warranty information, please contact Panasonic

Corporation of North America at DIAL TOLL FREE

1-800-LAPTOP5 (1-800-527-8675). If the equipment is

causing harm to the telephone network, the telephone

company may request that you disconnect the equip-

ment until the problem is resolved.

7. There are no user serviceable parts contained in this

equipment.

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party

lines is subject to state tariffs.

Getting Started

Read Me First

The Telephone Consumer Protection Act of 1991 makes

it unlawful for any person to use a computer or other

electronic device to send any message via a telephone

fax machine unless such message clearly contains in a

margin at the top or bottom of each transmitted page or

on the ﬁ rst page of the transmission, the date and time

it is sent and an identiﬁ cation of the business or other

entry, or other individual sending the message and

the telephone number of the sending machine or such

business, other entity, or individual. In order to program

this information into your fax software, you should refer

to the manual of the Fax software being used.

10. According to the FCC’s electrical safety advisory, we

recommend that you may install an AC surge arrestor

in the AC outlet to which this equipment is connected.

Telephone companies report that electrical surges,

typically lightning transients, are very destructive to

customer terminal equipment connected to AC power

sources and that this is a major nationwide problem.

“Caution : To reduce the risk of ﬁ re, use only No.26 AWG or

larger telecommunication line cord.”

“ATTENTION : Pour réduire le risque d’incendie, utiliser

uniquement des conducteurs de télécommunications 26

AWG ou de section supérieure.”

16-M-1

Notice for the products using LCD

This product uses one or more ﬂ uorescent lamps contain-

ing a small amount of mercury. It also contains lead in some

components. Disposal of these materials may be regulated

in your community due to environmental considerations.

For disposal or recycling information please contact your

local authorities, or the Electronics Industries Alliance:

<http://www.eiae.org/>

24-M-1

UL1604-conforming model. (The model which has de-

scription of “UL1604” in the bottom of the computer.)

THIS EQUIPMENT IS SUITABLE FOR USE IN

CLASS I, DIVISION2, GROUPS A, B, C, AND D OR

NON-HAZARDOUS LOCATIONS ONLY.

WARNING-EXPLOSION HAZARD-SUBSTITUTION

OF COMPONENTS MAY IMPAIR SUITABILITY FOR

CLASS I, DIVISION2.

When connecting and using a device manufactured by

a third party, enquire to the manufacturer as to wheth-

er the device suits CLASS I, DIVISION2.

33-M-1

Models for Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved

modem unit.

The Industry Canada label is afﬁ xed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identiﬁ es certiﬁ ed

equipment. This certiﬁ cation means that the equipment

meets telecommunications network protective, opera-

tional and safety requirements as prescribed in the ap-

propriate Terminal Equipment Technical Requirements

document(s). The Department does not guarantee the

equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that

it is permissible to be connected to the facilities of the

local telecommunications company. The equipment must

also be installed using an acceptable method of connec-

tion. The customer should be aware that compliance with

the above conditions may not prevent degradation of

service in some situations.

Repairs to certiﬁ ed equipment should be coordinated by a

representative designated by the supplier. Any repairs or

alterations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company

cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the elec-

trical ground connections of the power utility, telephone

lines and internal metallic water pipe system, if present,

are connected together. This precaution may be par-

ticularly important in rural areas. Caution: Users should

not attempt to make such connections themselves, but

should contact the appropriate electric inspection author-

ity, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned

to each terminal device provides an indication of the maxi-

mum number of terminals allowed to be connected to a tele-

phone interface. The termination on an interface may consist

of any combination of devices subject only to the require-

ment that the sum of the Ringer Equivalence Numbers of all

the devices does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identiﬁ e le matériel

homologué. Cette étiquette certiﬁ e que le matériel est

conforme aux normes de protection, d’exploitation et de

sécurité des réseaux de télécommunications, comme

le prescrivent les documents concernant les exigences

techniques relatives au matériel terminal. Le Ministère

n’assure toutefois pas que le matériel fonctionnera à la

satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est

permis de le raccorder aux installations de l’entreprise locale

de télécommunication. Le matériel doit également être installé

en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la con-

formité aux conditions énoncées ci-dessus n’empêche

pas la dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coor-

données par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à

l’utilisateur de débrancher un appareil à la suite de répa-

rations ou de modiﬁ cations effectuées par l’utilisateur ou

à cause de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que

tous les ﬁ ls de mise à la terre de la source d’énergie

électrique, des lignes téléphoniques et des canalisations

d’eau métalliques, s’il y en a, sont raccordés ensemble.

Cette précaution est particulièrement importante dans les

régions rurales. Avertissement: L’utilisateur ne doit pas

tenter de faire ces raccordements lui-même; il doit avoir

recours à un service d’inspection des installations élec-

triques, ou à un électricien, selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné

à chaque dispositif terminal indique le nombre maximal de

terminaux qui peuvent être raccordés à une interface. La

terminaison d’une interface téléphonique peut consister en

une combinaison de quelques dispositifs, à la seule condi-

tion que la somme d’indices d’équivalence de la sonnerie de

touts les dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Getting Started

CSA C22 2 NO.213-conforming model. (The model

which has description of “CSA C22 2 NO.213” in the

bottom of the computer.)

THIS EQUIPMENT IS SUITABLE FOR USE IN

CLASS I, DIVISION2, GROUPS A, B, C, AND D OR

NON-HAZARDOUS LOCATIONS ONLY.

WARNING-EXPLOSION HAZARD-SUBSTITUTION

OF COMPONENTS MAY IMPAIR SUITABILITY FOR

CLASS I, DIVISION2.

When connecting and using a device manufactured by

a third party, enquire to the manufacturer as to wheth-

er the device suits CLASS I, DIVISION2.

33-Ca-1

Industry Canada

This product complies with RSS210 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2)

this device must accept any interference, including inter-

ference that may cause undesired operation of the device.

30-Ca-1-1

This product (local network devices) for the band 5150-5250

MHz is only indoor usage to reduce potential for harmful

interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users (meaning they

have priority) of 5250-5350 MHz and 5650-5850 MHz and these

radars could cause interference and/or damage to LELAN devices.

30-Ca-2-1

This device has been designed to operate with an anten-

na having a maximum gain of 2.15 dBi. Antenna having a

higher gain is strictly prohibited per regulations of Industry

Canada. The Required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (EIRP) is not more

than that required for successful communication.

25-Ca-1-1

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

7-M-1

Models for Europe

Declaration of Conformity (DoC)

“Hereby, we declare that this Personal Computer is in compliance with the essential requirements

and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our products which relates to the R&TTE, please con-

tact our web address: http://www.doc.panasonic.de

Contact:

Panasonic Services Europe

A Division of Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Network connection.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks

Technical Features.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Nether-

lands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland,

Greece, Italy, Norway and Austria.

18-E-1

Compliance Notice - CE Mark

This equipment is in conformance with the requirements of the European Council Directive listed below:

73/23/EEC Low Voltage Directive with amendment 93/68/EEC

89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC

1999/5/EC R&TTE

21-E-1

Read Me First

Important Safety Instructions / Importantes Mesures De Sécurité

Getting Started

When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk

of ﬁre, electric shock and injury to persons, including the

following:

1. Do not use this product near water, for example, near

a bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk

of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the

vicinity of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a ﬁ re. They may

explode. Check with local codes for possible special

disposal instructions.

SAVE THESE INSTRUCTIONS

19-E-1

Certaines mesures de sécurité doivent être prises pen-

dant l’utilisation de matérial téléphonique aﬁn de réduire

les risques d’incendie, de choc électrique et de blessures.

En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’

une baignoire, d’un lavabo, d’un évier de cuisine, d’un

bac à laver, dans un sous-sol humide ou près d’une

piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un ap-

pareil sans ﬁl) pendant un orage électrique. Ceci peut

présenter un risque de choc électrique causé par la

foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler

une fuite de gaz s’il est situé près de la fuite.

4. Utiliser seulement le cordon d’alimentation et le type

de piles indiqués dans ce manual. Ne pas jeter les

piles dans le feu: elles peuvent exploser. Se conform-

er aux règlements pertinents quant à l’élimination des

piles.

CONSERVER CES INSTRUCTIONS

Information to the User

This product and your Health

This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy

emitted by this product however is far much less than the

electromagnetic energy emitted by wireless devices like

for example mobile phones.

Because this product operates within the guidelines found

in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations reﬂ ect the

consensus of the scientiﬁc community and result from

deliberations of panels and committees of scientists who

continually review and interpret the extensive research

literature.

In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or

responsible representatives of the organization. These

situations may for example include:



Using this product on board of airplanes, or



In any other environment where the risk of interference

to other devices or services is perceived or identiﬁed

as harmful.

If you are uncertain of the policy that applies on the use

of wireless devices in a speciﬁc organization or environ-

ment (e.g. airports), you are encouraged to ask for autho-

rization to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer-

ence caused by unauthorized modiﬁcation of this product.

The correction of interference caused by such unauthor-

ized modiﬁcation will be the responsibility of the user. We

and its authorized resellers or distributors are not liable

for damage or violation of government regulations that

may arise from failing to comply with these guidelines.

26-M-1

Lithium Battery / Pile au lithium

Lithium Battery!

This computer contains a lithium battery to enable the

date, time, and other data to be stored. The battery

should only be exchanged by authorized service person-

nel.

Warning!

A risk of explosion from incorrect installation or misappli-

cation may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui

permet de sauvegarder certaines données, notamment la

date et l’heure. La pile ne doit être remplacée que par un

technicien qualiﬁé.

Danger ! Risque d’explosion en cas de non respect de

cette mise en garde!

19-F-1

15-F-1

Precautions

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS

PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-

FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT

COCKPIT EQUIPMENT/SYSTEMS

. PANASONIC WILL

NOT BE RESPONSIBLE FOR ANY LIABILITY RESULT-

ING FROM THE USE OF THIS PRODUCT ARISING OUT

OF THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include

Class2 Electrical Flight Bag (EFB) Systems and Class1

EFB Systems when used during critical phases of ﬂight

(e.g., during take-off and landing) and/or mounted on to

the aircraft. Class1 EFB Systems and 2 EFB Systems are

deﬁned by FAA: AC (Advisory Circular) 120-76A or JAA:

JAA TGL (Temporary Guidance Leaﬂ ets) No.36.

Panasonic cannot guarantee any speciﬁ cations, technolo-

gies, reliability, safety (e.g. Flammability/Smoke/Toxic-

ity/Radio Frequency Emission, etc) requirements related

to aviation standards that exceed the speciﬁcations of our

COTS (Commercial-Off-The-Shelf) products.

39-E-1

This computer is not intended for use in medical equipment

including life-support systems, air trafﬁc control systems, or

other equipment, devices or systems that are involved with

ensuring human life or safety. Panasonic cannot be held

responsible in any way for any damages or loss resulting

from the use of this computer in these types of equipment,

devices or systems, etc.

The CF-19 was developed based on thorough research into

the real-world portable computing environments. Exhaustive

pursuit of usability and reliability under harsh conditions led

to innovations such has the magnesium alloy exterior, vibra-

tion damped hard disk drive and ﬂoppy disk drive, ﬂexible

internal connections. The CF-19’s outstanding engineering

has been tested using the strict MIL-STD- 810F (for vibration

and shock) and IP (for dust and water) based procedures.

As with any portable computer device precautions should be

taken to avoid any damage. The following usage and han-

dling procedures are recommended.

Before putting the computer away, be sure to wipe off any

moisture.

If a Malfunction Occurs, Immediately Unplug the AC

Cord and the Battery Pack



Computer is damaged



Foreign object inside computer



Smoke emitted



Unusual smell emitted



Unusually hot

Continuing to use the computer while any of the above con-

ditions are present may result in ﬁre or electric shock.



If a malfunction occurs, immediately turn the power off and

unplug the AC cord, and then remove the battery pack.

Do Not Touch the Computer and Cable When It Starts

Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source

Other Than a Standard Household AC Outlet

Otherwise, a ﬁre due to overheating may result. Connecting

to a DC/AC converter (inverter) may damage the AC adap-

tor. On an airplane, only connect the AC adaptor/charger to

an AC outlet speciﬁcally approved for such use.

Do Not Do Anything That May Damage the AC Cord, the

DC Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools,

bend, twist, or pull it forcefully, place heavy objects on it, or

bundle it tightly.

Continuing to use a damaged cord may result in ﬁ re, short

circuit, or electric shock.

Do Not Pull or Insert the DC Plug If Your Hands Are Wet

Electric shock may result.

Clean the DC Plug of Dust and Other Debris Regularly

If dust or other debris accumulates on the plug, humidity,

etc. may cause a defect in the insulation, which may result in

a ﬁre.



Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long

period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, ﬁre due to overheating

or electric shock may result.



Do not use a damaged plug or loose AC outlet.

Close the Connector Cover Tightly When Using the

Computer Where Is a Lot of Water, Moisture, Steam,

Dust, Oily Vapors, etc.

The entry of foreign matter may cause a ﬁre or electric

shocks.



If foreign matter has found its way inside, immediately turn

the power off and unplug the AC cord, and then remove

the battery pack. Then contact your technical support of-

ﬁce.

Do Not Disassemble the Computer

There are high-voltage areas inside which may give you an

electric shock if you should touch them. Do not touch the

pins and circuit boards inside, and do not allow foreign mat-

ter to enter inside.

Also, remodeling or disassembly may cause a ﬁre.

Keep SD Memory Cards Away from Infants and Small

Children

Accidental swallowing will result in bodily injury.

In the event of accidental swallowing, see a doctor immedi-

ately.

Do Not Place the Computer on Unstable Surfaces

If balance is lost, the computer may fall over or drop, result-

ing in an injury.

Avoid Stacking

If balance is lost, the computer may fall over or drop, result-

ing in an injury.

Do Not Leave the Computer in High Temperature Envi-

ronment Such as in a Sun-Heated Car, for a Long Period

of Time

Leaving the computer where it will be exposed to extremely

high temperatures such as in a sun-heated car or in direct

sunlight may deform the cabinet and/or cause trouble in the

internal parts. Continued use in such a resulting condition

may lead to short-circuiting or insulation defects, etc. which

may in turn lead to a ﬁre or electric shocks.

Hold the Plug When Unplugging the AC Cord

Pulling on the cord may damage the cord, resulting in a ﬁre

or electric shock.

Do Not Move the Computer While the DC Plug Is Con-

nected

The AC cord may be damaged, resulting in ﬁre or electric

shock.



If the AC cord is damaged, unplug the DC plug immedi-

ately.

Use Only the Speciﬁed AC Adaptor With Your Computer

Using an AC adaptor other than the one supplied (attached

to your computer or supplied by Panasonic) may result in a

ﬁre.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being

dropped may result in electric shock, short circuit, or ﬁre.

Take a Break of 10-15 Minutes Every Hour

Using the computer for long periods of time may have detri-

mental health effects on the eyes or hands.

Getting Started

Read Me First

Do Not Turn the Volume Up to Loud When Using Head-

phones

Listening at high volumes that overstimulate the ear for long

periods of time may result in loss of hearing.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise switches)

of a company or business ofﬁ ce, etc. or to a digital public

phone or use in a country or area not supported by the com-

puter may result in a ﬁ re or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable

Other Than the One Speciﬁ ed, into the LAN Port

If the LAN port is connected to a network such as the ones

listed below, a ﬁ re or electric shock may result.

Networks other than 1000BASE-TX, 100BASE-TX or

10BASE-T

Phone lines (Telephone lines, internal phone lines (on-

premise switches), digital public phones, etc.)

Precautions (Battery Pack)

Do Not Use with Any Other Computer

The battery pack is rechargeable and was intended for the

speciﬁ ed computer or charger. If it is used with a computer

other than the one for which it was designed, electrolyte

leakage, generation of heat, ignition or rupture may result.

Do Not Charge the Battery Using the Methods Other

Than Indicated in This Manual

If the battery pack is not charged using one of the methods

indicated in this manual, electrolyte leakage, generation of

heat, ignition or rupture may result.

Do Not Throw the Battery Pack into a Fire or Expose It

to Excessive Heat

Generation of heat, ignition or rupture may result.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for

Example)

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects into the Battery Pack, Ex-

pose It to Bumps or Shocks, Disassemble, or Modify It

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Short the Positive (+) and Negative (-) Contacts

Generation of heat, ignition or rupture may result. Do not

place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing.

Do Not Use This Computer with a Battery Pack Other

Than the One Speciﬁ ed

Use only the speciﬁ ed battery pack (CF-VZSU48U) with your

CF-19. Use of battery packs other than those manufactured

and supplied by Panasonic may present a safety hazard

(generation of heat, ignition or rupture).

Do not touch the terminals on the battery pack. The bat-

tery pack may no longer function properly if the contacts

are dirty or damaged.

Do not expose the battery pack to water, or allow it to

become wet.

If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery pack until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

This computer prevents overcharging of the battery by

recharging only when the remaining power is less than

approx. 95% of capacity.

Do Not Use with Exposing the Skin to the Computer for

a Long Period of Time

Using the computer with exposing the skin to the heat source

of the computer or AC adaptor for a long period of time can

cause a low-temperature burn.

Do not place the computer near a television or radio re-

ceiver.

Keep the computer away from magnets. Data stored on

the hard disk may be lost.

The battery pack is not charged when the computer is

ﬁ rst purchased. Be sure to charge it before using it for

the ﬁ rst time. When the AC adaptor is connected to the

computer, charging begins automatically.

Should the battery leak and the ﬂ uid get into your eyes,

do not rub your eyes. Immediately ﬂ ush your eyes with

clear water and see a doctor for medical treatment as

soon as possible.

NOTE

The battery pack may become warm during recharg-

ing or normal use. This is completely normal.

Recharging will not commence if internal temperature

of the battery pack is outside of the allowable temper-

ature range (0 °C to 50 °C {32°F to 122 °F}).

(

Reference Manual “Battery Power”) Once the

allowable range requirement is satisﬁ ed, charging

begins automatically. Note that the recharging time

varies based on the usage conditions. (Recharging

takes longer than usual when the temperature is 10 °

C {50 °F} or below.)

If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable

temperature range.

This computer has a high temperature mode function

that prevents the degradation of the battery in high

temperature environments. (

Reference Manual

“Battery Power”) A level corresponding to a 100%

charge for high temperature mode is approximately

equivalent to an 80% charge level for normal tempera-

ture mode.

The battery pack is a consumable item. If the amount

of time the computer can be run by using a particular

battery pack becomes dramatically shorter and re-

peated recharging does not restore its performance,

the battery pack should be replaced with a new one.

When transporting a spare battery inside a package,

briefcase, etc., it is recommended that it be placed in

a plastic bag so that its contacts are protected.

Always power off the computer when it is not in use.

Leaving the computer on when the AC adaptor is not

connected will exhaust the remaining battery capacity.

For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhicule Motorisé

Warning: Notebook Computer may be installed in a mo-

tor vehicle and visible to the driver only if used to support

vehicle related functions such as vehicle information,

system control, rear or side observation and navigation. If

used for entertainment purpose, such as television recep-

tion or video play, it must be installed to the rear of the

driver’s seat where it will not be

visible, directly or indirectly, to the operator of the motor

vehicle. Check with individual state/provincial laws to de-

termine lawful use of this product while operating within a

motor vehicle.

Avertissement : L’ordinateur bloc-notes peut être installé

dans un véhicule motorisé et dans le champ de vision du

conducteur uniquement en tant que dispositif d’aide aux

fonctions du véhicule, comme par exemple pour fournir

des informations sur le véhicule, comme dispositif de

contrôle de système, pour l’observation à l’arrière ou sur

les côtés du véhicule, ainsi que pour fournir de l’informa-

tion routière. Pour toute utilisation à ﬁn de divertissement,

comme par exemple pour regarder la télévision ou jouer

à des jeux vidéo, il doit être installé à l’arrière du siège du

conducteur, en un emplacement où il ne sera pas visible,

ni directement ni indirectement, pour le conducteur du

véhicule motorisé. Vériﬁez les lois fédérales et nationales

qui régissent l’utilisation légale de cet appareil à l’intérieur

d’un véhicule motorisé.

35-M-1

Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households)

Getting Started

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct

method of disposal.

36-M-1

Getting Started

Description of Parts

A: Wireless LAN Antenna



Reference Manual “Wireless LAN”

B: Bluetooth Antenna



Reference Manual “Bluetooth”

C: Stylus/Pen Holder

D: Touch Pad

E: LED Indicator

: Wireless ready

This indicator lights when Wireless LAN, Blue-

tooth, and/or Wireless WAN are connected and

ready. It does not necessarily indicate the On/Off

condition of the wireless connection.



Reference Manual “Wireless Switch Utility”

: Wireless WAN status



Refer to the instruction manual of the wireless

device.

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk drive status

F: Tablet Buttons



Reference Manual “Tablet Buttons”

G: LCD



Reference Manual “Touchscreen”



Reference Manual “Digitizer”

H: Display Release Latch



page 12 “Switching to the Tablet mode”

I: Speaker



Reference Manual “Key Combinations”

J: Function Key



Reference Manual “Key Combinations”

K: Keyboard

L: Hard Disk Drive



Reference Manual “Hard Disk Drive”

M: Battery Pack

N: Power Switch

O: LED Indicator

: Battery status



Reference Manual “Battery Power”

: Power status

(Off: Power off/Hibernation, Green: Power on,

Blinking green: Standby)

A lithium ion battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY for information on how to recycle this battery.

L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion.

Pour des renseignements sur le recyclage de la batterie, veuillez composer le

1-800-8-BATTERY.

Getting Started

Left side

Rear side Bottom

A: DC-IN Jack

B: USB Port

Reference Manual “USB Devices”

C: IEEE 1394 Interface Connector

Reference Manual “IEEE 1394 Devices”

D: Modem Port

Reference Manual “Modem”

E: LAN Port

Reference Manual “LAN”

F: SD Memory Card Indicator

(Blinking: During access)

Reference Manual “SD Memory Card”

G: SD Memory Card Slot

Reference Manual “SD Memory Card”

H: Wireless Switch

Reference Manual “Wireless Switch Utility”

I: PC Card Slot

Reference Manual “PC Card / ExpressCard”

J: ExpressCard Slot

Reference Manual “PC Card / ExpressCard”

K: Headphone Jack

You can connect headphones or ampliﬁ ed speakers.

When they are connected, audio from the internal

speakers is not heard.

L: Microphone Jack

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur as a result.

When recording in stereo using a stereo micro-

phone:

Double-click

in the notiﬁ cation area, click [Op-

tions] - [Properties], and add a check mark for [Re-

cording], click [OK] - [Options] - [Advanced Controls]

- [Advanced], remove a check mark for [Mono Micro-

phone], and then click [Close].

When using a monaural microphone with a 2-termi-

nal plug:

With the settings outlined above, only audio on the

left track will be recorded.

When monitoring the microphone audio using head-

phones, sounds on the left track cannot be heard,

regardless of the above settings. This is a result of the

computer’s speciﬁ cations, and is not a malfunction.

M: Security Lock

A Kensington cable can be connected.

For further information, read the manual that comes

with the cable.

N: External Display Port

Reference Manual “External Display”

O: Serial Port

P: RAM Module Slot

Reference Manual “RAM Module”

Q: Expansion Bus Connector

Reference Manual “Port Replicator / Car Mounter”

R: External Antenna Connector

Getting Started

Description of Parts

Switching to the Tablet mode

Lift up the display so it stands perpendicular to the body.

Slide and hold the display release latch (A), and rotate the display

clockwise until it clicks.

Attaching the stylus to the computer

Use the tether to attach the stylus to the computer so you will not lose it.

There are holes (A) to attach it.

For model with digitizer, the tether and pen are already attached to the

computer at purchase.

Attaching the hand strap and the shoulder strap

Attach the hand strap to any two of the corners (A) using the screws.

You can connect the shoulder strap (B) to the hand strap.

(The illustration is an example.)

CAUTION

Do not use the strap to carry a heavier weight than the computer. Other-

wise the strap may become loose by itself.

Do not use the strap if it becomes worn or damaged.

Close as the display faces up and ﬁ x it using the latch (B).

Getting Started



Preparation

Check and identify the supplied accessories.

If you do not ﬁ nd the described accessories, contact Panasonic Technical Support (

page 36).

• AC Adaptor . . . . . 1

Model No: CF-AA1633A

• AC Cord . . . . . . . 1 • Battery Pack . . . 1

Model No: CF-VZSU48

• Modem Telephone Cable . . . 1

• Tether . . . . . . . . . 1 • Shoulder strap . . 1 • Soft Cloth . . . . . . 1

• Stylus . . . . . . . . . . . . . . . . . . . 1

• Pen . . . . . . . . . . . . . . . . . . . . . 1

• Operating Instructions (This book) . . .1

• Product Recovery DVD-ROM . . . . . . . .1

• Windows

Book . . . . . . . . . . . . . . . . . . .1

For model with digitizer, the tether and pen are already attached to the computer at purchase.

Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging

(

page 32).

1 Insert the battery pack.

Slide the latch (A) to the right to unlock the cover.

Slide the latch (A) down, and open the cover.

Insert the battery pack until it securely ﬁ ts the connector.

Close the cover until it clicks.

Slide the latch (B) to the left to lock the cover.

CAUTION

Make sure the latch is securely locked. Otherwise the battery pack may fall

when you carry the computer.

Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery

pack and the computer.

First-time Operation

Getting Started

First-time Operation

2 Connect your computer to a power outlet.

The battery charging starts automatically.

CAUTION

Do not disconnect the AC adaptor and do not switch the wireless switch to on

until the ﬁ rst-time operation procedure is completed.

When using the computer for the ﬁ rst time, do not connect any peripheral device

except the battery pack and AC adaptor.

Handling the AC adaptor

Problems such as sudden voltage drops may arise during periods of thunder

and lightning. Since this could adversely affect your computer, an uninter-

ruptible power source (UPS) is highly recommended unless running from the

battery pack alone.

3 Turn on the computer.

Pull up the part (A) and release the latch.

Lift open the display.

Slide and hold the power switch (B) for approximately one second until the

power indicator

lights.

CAUTION

Do not slide the power switch repeatedly.

The computer will forcibly be turned off if you slide and hold the power switch for

four seconds or longer.

Once you turn off the computer, wait for ten seconds or more before you turn on

the computer again.

Do not perform the following operation until the hard disk drive indicator turns off.

Connecting or disconnecting the AC adaptor

Sliding the power switch

Touching the keyboard, touch pad, tablet buttons, touchscreen (only for model

with touchscreen), digitizer (only for model with digitizer) or external mouse

Closing the display

When the CPU temperature is high, the computer may not start up to prevent

overheating of the CPU. Wait until the computer cools down, and then turn the

power on again. If the computer does not power on even after cooling down,

contact Panasonic Technical Support (

page 36).

4 Setup Windows.

Follow the on-screen instructions.

CAUTION

When you set date/time/time zone and click [Next], the screen may not go to the

next step for a few minutes. Do not touch the keyboard or touch pad, and wait

until the screen changes.

If “An unexpected error has occurred…” (or a similar message) is displayed,

click [OK]. This is not a malfunction.

Wait until the hard disk drive indicator has turned off.

This computer periodically records the management information including the

hard disk information such as number of hours powered-on, number of times

powered-on, internal temperature, replacement sector. The maximum data vol-

ume for each record is 750 byte. These information are only used for estimating

the cause when the hard disk goes down by any possibility. They are never sent

to outside via network nor used for any other purpose except for the purpose

described the above.

To disable the function, add the check mark for [Disable the automatic save

function for management information history] in [Hard Disk Status] of PC Infor-

mation Viewer, and click [OK].

Getting Started

5 Create a new account.

Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

CAUTION

Remember your password. If you forget the password, you cannot use the Windows

operation system. Creating a password reset disk beforehand is recommended.

6 <Only for model with touchscreen>

Perform the touchscreen calibration.

Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen

Calibration Utility].

Using the stylus, touch each of the 12 “+” target marks one by one until it

blinks, and then click [Calibration].

Click [Save & Exit].

NOTE

Regarding Windows XP

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on

or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

Windows Update

You can update to the latest patches and service packs for Windows with the following menus.

[start] - [All Programs] - [Windows Update]

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required,

contact Panasonic Technical Support (

page 36).

If the message “Your computer might be at risk” is displayed

Select

on the notiﬁ cation area and make the appropriate settings. The Windows Security Center regularly gives

you notice so that you can make the optimum settings. This is not an error message and you can use the computer.

However, making appropriate measures is recommended to reduce the risk of virus and other attacks.

Note that the computer consumes electricity even when the computer power is off.

If the battery pack is fully charged, the battery will fully discharge in Approx. 7 weeks.

Useful Information

On-screen Manual

You can access the Reference Manual and the Important Tips on the computer screen.

When you access the Reference Manual and the Important Tips for the ﬁ rst time, the License Agreement of the Adobe

Reader may be displayed. Read it carefully and select [Accept] to proceed.



Reference Manual

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

To access the Reference Manual:

Click [start] - [Reference Manual].

Contents



Key Combinations



Tablet Buttons



Touchscreen



Digitizer



Software Keyboard



Panasonic Hand Writing



Display Rotation



Standby and Hibernation Functions



Security Measures



Battery Power



PC Card / ExpressCard



SD Memory Card



SD Security



RAM Module



Port Replicator / Car Mounter



External Display



USB Devices



IEEE 1394 Devices



Modem



LAN



Wireless Switch Utility



Wireless LAN



Bluetooth



Hard Disk Drive



Setup Utility



Icon Enlarger



Loupe Utility



DMI Viewer



Recover Pro



Technical Information



Troubleshooting (Advanced)

Some contents only apply to some limited models.



Important Tips

The Important Tips will provide you with the helpful information about the battery and touchscreen. Read to use the

battery pack in the optimum condition to obtain longer operation time.

To access the Important Tips:

Double-click

on the desktop.



Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

Useful Information

Handling and Maintenance

Operation environment



Place the computer on a ﬂ at stable surface. Do not place the computer upright or turn it over. If the computer is

exposed to an extremely strong impact, it may become inoperable.



Temperature: Operation : 5 °C to 35 °C {41 °F to 95 °F}

Storage : -20°C to 60 °C {- 4 °F to 140 °F}

Humidity: Operation : 30% to 80% RH (No condensation)

Storage : 30% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in

the product deterioration and will shorten the product life.



Do not place the computer in the following areas, otherwise the computer may be damaged.



Near electronic equipment. Image distortion or noise may occur.



In extremely high or low temperature.



As the computer can become hot during operation, keep it away from items that are sensitive to heat.

Handling cautions

This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a

drip-proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when han-

dling the computer.



When carrying the computer:



Turn off the computer.



Remove all external devices, cables, cards and other protruding things.



Do not drop or hit the computer against solid objects.



Do not leave the display open.



Do not grip the display part.



Do not put anything (e.g., a piece of paper) between the display and keyboard.



When you board an airplane, take the computer with you and never put it in your checked luggage. When using the

computer on airplane, follow the airline’s instructions.



When carrying a spare battery, put it in a plastic bag to protect its terminals.



The touch pad is designed to be used with a ﬁ nger tip. Do not place any object on its surface and do not press

down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).



Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.



This computer contains a magnet and magnetic products at the locations circled in the

illustration at right. Avoid leaving metallic object or magnetic media in contact with these

areas.



Use only the included stylus/pen to touch the screen. Do not place any object on its sur-

face and do not press down strongly with sharp-pointed or hard objects that may leave

marks (e.g., nails, pencils and ball point pens).



Do not use the stylus/pen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign

particles on the screen/stylus/pen can scratch the screen surface or obstruct the stylus/pen operation.



Use the stylus/pen only for touching the screen. Using it for any other purpose may damage the stylus/pen and

result in scratches on the screen.



The digitizer uses electromagnetic induction and may not work properly near strong electrical ﬁ eld or magnetic ﬁ eld

such as:



near AM radio base station or relay station antennas



near CRT displays that generate strong electromagnetic ﬁ eld noise

Move the digitizer away from such locations so it will work properly.



The cursor cannot follow the pen movement if you move the pen too quickly.



When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction

manuals of the peripheral devices.



Use the peripheral devices conforming to the computer’s speciﬁ cations.



Connect to the connectors in the correct direction.



If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.



If screws are included, fasten them securely.



Remove the cables when you carry the computer. Do not pull the cables forcibly.

Handling and Maintenance

Useful Information



Preventing your computer from unauthorized use via wireless LAN



Before using wireless LAN, make the appropriate security settings such as data encryption.



Computrace

Software

Computrace

software tracks your stolen computer.

Perform the following steps before installing Computrace

software.



Computrace

software is not included or installed in this computer.

CAUTION



You will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change

the setting when not used.



Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs

to the motherboard, etc. have been made.

NOTE



Consult Absolute Software Corp. before disposal.



Refer to the following URL for Computrace

software for installation and available service regions. Note that this

service is only available in certain regions.

http://www.absolute.com

1 Turn on or restart the computer, and press

while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.



If the password is requested, enter the Supervisor Password.

2 Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press

Enter

3 Select [Computrace (R) BIOS Module], and set to [Enable].

4 At the conﬁrmation message, select [Execute] and press

Enter

5 At the reconﬁrmation message, select [Execute] and press

Enter

6 Press

F10

At the conﬁrmation message, select [Yes] and press

Enter

The computer restarts.

Maintenance

To clean the LCD panel

Use the soft cloth included with the computer. (For further information, refer to “Suggestions About Cleaning the LCD

Surface” that comes with the soft cloth.)

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it

thoroughly.

CAUTION



Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to

the surface.



Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

Useful Information

Hard Disk Backup Function (Recover Pro)

The Recover Pro creates a backup area (storage area) on the hard disk to back up (store) the hard disk data, and re-

stores the backup data to its original location when it is lost or corrupted by operational errors or other factors. You do

not need external media or peripheral devices to back up or restore hard disk data on this computer.

At purchase, the Recover Pro is not installed. Install using the instructions below.

The Recover Pro cannot back up or restore data correctly if a hard disk problem occurs during data backup or re-

storing. If an error occurs due to an unexpected malfunction, incorrect operation, or other reason while data is being

restored, the hard disk data (data before restoration) may be lost.

Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as a

result of the use of this function.

The Recover Pro provides 3 types of backup as follows:



Quick Backup: Scheduled backup of the updated data



File Backup: File backup at ﬁ le save and change



Complete Backup: Backup of the entire data on the internal hard disk

Here, we will explain the procedures for installation, complete backup (backing up hard disk contents in case Windows can-

not be booted), and complete restore (recovering the hard disk data to its condition at the time of the complete backup).

For further information, refer to the software’s online manual (



page 20).

CAUTION



All operations should be executed with the AC adaptor connected. Do not turn the power off while operations are

in progress. If the power is turned off while installation, backup, or restore operations are in progress, these opera-

tions may not function properly, and it may be impossible to start Windows. Also, do not press any keys or slide any

switches, including hot keys.



When restarting the computer, the message “Check ﬁ le system on C:” may appear. Follow the on-screen instruc-

tions. Do not skip the check process.



Make sure you allow enough space on the hard disk when choosing settings during installation. To change these

settings you must reinstall Recover Pro.

To execute Complete Backup reliably, we recommend performing [Typical] installation in the following cases.



Hard disk with a single partition



Immediately after reinstalling software (when more than half of the entire space of the hard disk is available)

(



page 22)



Be sure to use the internal hard disk drive to create the backup area. Never use disk or device other than the inter-

nal hard disk drive.



Some software (security software, backup software, encryption software, or hard disc accessible speciﬁ c software,

etc.) may be incompatible with Recover Pro.

For further information, refer to:

http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/Recover+Pro/default.htm



When using Personal Secure Drive (



Installation Manual of “Trusted Platform Module (TPM)”), do not execute

File Backup for Personal Secure Drive.



The “Create recovery CD-DVD” function in Recover Pro is designed to help you save complete backup data to CD

or DVD. When using the “Create recovery CD-DVD”, you can view the complete backup data on the hard disk, but

take care to avoid accidentally deleting this data.



After installing the Recover Pro, do not use the IEEE1394 network connection. If any problem occurred, stop the

IEEE1394 network connection and restart the computer.

Installation

Preparation



Connect the AC adaptor.

1 Log on to Windows as an administrator.

2 Close all programs.

3 Disable anti-virus software.

4 Click [start] - [Run], enter [c:\util\rcvpro\setup.exe], and click [OK].

The InstallShield Wizard screen appears.

5 Click [Next].

Follow the on-screen instructions.

Carefully read the License Agreement, and click [I accept the agreement.]



The computer restarts several times to complete installation. appears in the notiﬁ cation area.

Hard Disk Backup Function (Recover Pro)

CAUTION

Useful Information



During the installation, the screen may become black (no display) momentarily. This is not a malfunction.



If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the back-

up area.



You cannot change the size of backup area after creation.

Complete Backup

Backs up all data on the hard disk.

Preparation



Connect the AC adaptor.

1 Log on to Windows as an administrator.

2 Close all programs.

3 Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Recover Pro 6].

“Recover Pro 6” screen appears.

4 Click [Complete Backup], and click [Yes].



The computer restarts, and “Recover Pro 6” screen appears.

Follow the on-screen instructions.

NOTE



You can completely backup only one hard disk’s worth of data to the backup area.



Do not touch the power switch while using the Recover Pro.

Complete Restore

This function uses the data created during complete backup. It restores the hard disk data to the condition when you

performed the complete backup. Files created and changes made to settings after the latest complete backup is made

will be deleted.

Preparation



Connect the AC adaptor.

1 Click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Always Launcher], and

click [Run].



The computer restarts, and “Phoenix Always” screen appears.

Alternatively turn on or restart the computer, and hold down

while [Panasonic] boot screen is displayed until

“Phoenix Always” screen appears.

2 Click [Protect / Recover], and click [Phoenix Recover Pro 6].



“Recover Pro 6” screen appears.

3 Click [Complete Restore].

Follow the on-screen instructions.

NOTE



Do not touch the power switch while using the Recover Pro.



To access the online manual

Click [start] - [All Programs] - [Phoenix Applications] - [Docs], and double-click [UserGuides].

Double-click the ﬁle of Recover Pro user’s guide or Phoenix Always user’s guide.

La page charge ...

Panasonic CF-19K4RAX2M Manuel utilisateur

Marque: Panasonic

Modèle: CF-19K4RAX2M

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Panasonic CF-19K4RAX2M User manual

Panasonic CF-19K4RAX2M Manuel utilisateur

Panasonic CF-19K4RAX2M Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents