Korg MS2000B Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

1
MS2000B / MS2000BR Owner's Manual Addendum
Thank you for purchasing the MS2000B/BR Analog Modeling Synthesizer.
To ensure trouble-free enjoyment, please read this manual carefully and use the product as directed.
The MS2000B provides an XLR microphone jack on the front panel. Also included is a matching gooseneck microphone that can
plug directly into this jack, providing immediate access to the Vocoder functions (see “MICROPHONE CONNECTIONS”).
In addition, the MS2000B and MS2000BR contain many new internal programs compared to the original MS2000/R (see “VOICE
NAME LIST“).
The specifications and functions remain the same as for the MS2000 / MS2000R.
Please read and refer to the MS2000 / MS2000R Owner's Manual.
MICROPHONE CONNECTIONS (MS2000B ONLY)
Do not use the AUDIO IN 2 jack when using the microphone provided.
Use only the microphone included with the MS2000B when using the front panel mic input jack.
Set the AUDIO IN [2/VOICE] knob to zero when you are not using the AUDIO IN 2 jack or the mic input jack.
Do not apply pressure to the neck of the microphone, and do not bend it more than necessary. These actions may cause damage
to the microphone, etc.
INSTALLING THE MICROPHONE
Please refer to “Using the vocoder function” (page 17 of the MS2000/MS2000R Owner's Manual). When
connecting the MS2000B microphone, make sure the microphone and the mic input jack are facing the same
way (the screw on the base of the microphone should face the rear of the MS2000B)
Hold the microphone by the base when connecting and disconnecting.
DISCONNECTING THE MICROPHONE
Push down on the latch lever of the mic jack and, while holding the microphone by its base, pull the mic
straight up and out of the mic jack.
Be sure to depress the latch lever on the mic jack when removing the microphone.
Mic base
P
U
S
H
Latch lever
MS2000B/MS2000BR Mode d’emploi
Tout d’abord nous tenons à vous remercier de votre achat du synthétiseur à modélisation analogique MS2000B/BR.
Afin de profiter pleinement de votre achat, veuillez lire attentivement ce manuel, et utiliser votre appareil dans des conditions
correctes.
Le MS2000B possède une entrée microphone sur la face avant, et un microphone est inclus pour la fonction Vocodeur. (Voir “COM-
MENT INSTALLER L’ACCESSOIRE MICROPHONE FOURNI”).
Quelques programmes internes ont été modifiés par rapport au MS2000 (voir “VOICE NAME LIST“).
Les caractéristiques et fonctions sont les mêmes que les MS2000/MS2000R.
Veuillez S ‘il vous plait lire et vous référer au mode d’emploi de ces modèles.
COMMENT INSTALLER L’ACCESSOIRE MICROPHONE FOURNI (SEULEMENT MS2000B)
S’il vous plait, ne pas utiliser l’entrée AUDIO IN2 quand vous utilisez le microphone fourni.
Vérifiez que vous utilisez le microphone fourni uniquement avec l’entrée Micro.
Réglez le bouton AUDIO IN [2/VOICE] sur zéro quand vous n’utilisez pas l’entrée AUDIO IN 2 et l’entrée Micro.
Ne pas trop manipuler le corps du micro et ne pas le tirer plus que nécessaire, cela pourrait provoquer des déconnections ou des
troubles.
INSTALLATION DU MICROPHONE.
S’il vous plait veuillez vous référer au chapitre “Utilisation de la fonction vocoder“ (page 17 du mode
d’emploi des MS2000 et MS2000R).
Quand vous connectez le Microphone fourni, veillez à ce que la connectique du Micro et la prise d’entrée
coïncident (une vis sur la tige du Micro est située sur la face arrière).
Veuillez maintenir la tige du Microphone fourni quand vous l’installez ou vous le démontez.
DEMONTAGE DU MICROPHONE
Poussez le petit levier et en même temps tirer le Microphone tout en maintenant la prise en face avant.
Griff
P
U
S
H
petit levier
MS2000B / MS2000BR Zusatzanleitung
Vielen Dank für den Kauf des MS2000B/BR Analog Modeling Synthesizers. Um ein lange und problemlose Nutzung sicherzustel-
len, sollten Sie diese Anleitung sorgfältig lesen und das Instrument entsprechend bedienen.
Der MS2000B besitzt eine XLR Mikrofon-Buchse auf dem Frontpanel und ein, im Lieferumfang enthaltenes, passendes Schwanen-
hals-Mikrofon, welches Ihnen die Benutzung der Vocoder-Funktionen sofort ermöglicht. (siehe „ANSCHLUSS DES MIKROFONS“).
Außerdem wurden viele der Werkssounds für den MS2000B/BR komplett neu programmiert (siehe „VOICE NAME LIST“).
Die technischen Daten und Funktion sind ansonsten identisch mit denen des MS2000/R. Zur Bedienung studieren Sie bitte daher die
bisherige MS2000/MS2000R Anleitung.
ANSCHLUSS DES MIKROFONS (nur MS2000B)
Zum Anschluss des beiliegenden Mikrofons bitte ausschließlich die dafür vorgesehene frontseitige Mikrofonbuchse verwenden,
nicht die AUDIO IN 2 Klinkenbuchse.
Falls Sie weder den Mikrofoneingang noch die AUDIO IN 2 Buchse verwenden, drehen Sie den AUDIO IN [2/VOICE] Regler
zurück auf „0“.
Üben Sie keinen Druck auf den Schwanenhals des Mikrofons aus und biegen Sie ihn nur soviel wie notwendig, da sonst das
Mikrofon beschädigt werden könnte.
Achten Sie beim Anschluss des Mikrofons darauf, dass der integrierte XLR Stecker korrekt in die Buchse
gesteckt wird (Die Schraube am unteren Ende des Mikrofons muss nach hinten weisen). Zur Bedienung der
Vocoder-Funktion lesen Sie bitte die Seite 17 der MS2000/MS2000R Bedienungsanleitung.
Um Beschädigungen vorzubeugen, halten Sie das Mikrofon während des Anschließens und Abnehmens
am unteren Ende fest.
ABNEHMEN DES MIKROFONS
Drücken Sie den Sicherungsstift der XLR-Buchse nach unten und ziehen sie währenddessen das Mikrofon
nach oben heraus. Halten Sie dabei das Mikrofon am unteren Ende.
Griff
P
U
S
H
Sicherungsstift
2003 KORG INC. 1504 DTH
Printed in Japan
Voice Name List
No. Name Category Mode SEQ 1 SEQ 2 SEQ 3 ARPEGGIATOR
A01 UnisonRingLD Synth-Lead Single Cutoff Panpot Off
A02 Flashin'Pad Seq/Motion Single LFO2 Frequency Cutoff EG1 Intensity Panpot Off
A03 X-ModBass Synth-Bass Dual
T1 Pitch Cutoff Panpot
Off
T2 Cutoff Pitch Panpot
A04 IDM Pad Strings/Pad Single LFO2 Frequency Cutoff Resonance Off
A05 HyperForce Synth-Hard Single Pitch Cutoff Off
A06 Pan Tran Synth-Soft Single Panpot Off
A07 Razor Blade Seq/Motion Single Osc2 Semitone Cutoff Level Random
A08 DetuneBass Synth-Bass Single Pitch Cutoff Panpot Off
A09 High Voltage Synth-Lead Dual
T1 Osc2 Semitone Cutoff
Off
T2 Osc2 Semitone Cutoff
A10 AnalogBell Percussive/Bell Single Patch 3 Intensity EG2 Release Time Patch 4 Intensity Alt1
A11 FonkaDeli Keyboards Single Cutoff EG2 Release Time Osc1 Control2 Off
A12 AutoTrance Seq/Motion Dual
T1 Pitch Cutoff EG1 Intensity Level
Trigger
T2 Osc2 Semitone Pitch
A13 4OSC"m7" Synth-Hard Dual
T1 Pitch EG2 Sustain Level Cutoff
Off
T2 Pitch EG2 Sustain Level Cutoff
A14 Digy Bass Synth-Bass Single Pitch Cutoff Off
A15 Domin8or S.E/Drum Single Patch 1 Intensity Off
A16 FilterString Strings/Pad Single Cutoff Osc2 Tune Off
B01 70'sFunkLead Synth-Lead Single Cutoff Pitch Panpot Off
B02 SawSaw Seq/Motion Single Osc2 Semitone Resonance Cutoff EG1 Intensity Off
B03 House Bass Synth-Bass Single EG1 Attack Time EG2 Release Time Cutoff EG1 Intensity Off
B04 Stairs Pad Strings/Pad Dual
T1 Panpot Cutoff EG1 Intensity Step Length
Alt1
T2
B05 Poly Line Synth-Hard Single Cutoff Resonance Off
B06 Ice Field Synth-Soft Single EG2 Attack Time Noise Level Off
B07 Fairies Seq/Motion Single Osc1 Control2 Cutoff Level Alt1
B08 Line Bass Synth-Bass Single Pitch Level Patch 2 Intensity Off
B09 ModLead Synth-Lead Single Osc2 Semitone Panpot Cutoff Off
B10 RingPerc Percussive/Bell Dual
T1 Osc1 Control2 Cutoff
Up
T2 Resonance
B11 Reed Piano Keyboards Single Patch 1 Intensity Off
B12 Filter Muzik Seq/Motion Dual
T1 Pitch Osc2 Semitone
Off
T2 Noise Level Cutoff Pitch
B13 RingChord Synth-Hard Single Osc1 Control2 Panpot Cutoff Off
B14 Warp Bass Synth-Bass Single Resonance Osc2 Level EG1 Attack Time Off
B15 KillaBeez S.E/Drum Single Noise Level Resonance Cutoff Off
B16 Evolution Strings/Pad Single LFO1 Frequency Patch 4 Intensity EG2 Release Time Off
C01 TriangleLead Synth-Lead Single Pitch Panpot Cutoff Off
C02 GatedSyncBas Synth-Bass Single Osc2 Semitone Panpot Off
C03 Bass Machine Synth-Bass Single Pitch Panpot Cutoff Off
C04 Snowdance Strings/Pad Dual
T1 Osc1 Control2 Level Cutoff
Random
T2 Cutoff EG2 Attack Time Level
C05 Stab Saw Synth-Hard Single Osc2 Tune Pitch Panpot Off
C06 Wheeler Pad Strings/Pad Single Cutoff Resonance Level Off
C07 SynthHarp Seq/Motion Single Cutoff Patch 1 Intensity Panpot Up
C08 AcidRingBass Synth-Bass Single Pitch Cutoff Panpot Off
C09 Dirty Sync Synth-Lead Single Osc2 Semitone Panpot Pitch Off
C10 ElektricArpe Percussive/Bell Single EG2 Decay Time EG2 Release Time Osc1 Control1 Random
C11 RockOrgan Keyboards Single Panpot Cutoff Off
C12 Ready 2 Air Seq/Motion Dual
T1 Cutoff Resonance Noise Level
Off
T2 Pitch Level Osc1 Control2
C13 Sweep"min" Synth-Hard Single Pitch Level Cutoff Off
C14 TechRingBass Synth-Bass Single Patch 2 Intensity LFO2 Frequency Pitch Off
C15 Echo Park S.E/Drum Single Level Pitch Off
C16 PWM Strings Strings/Pad Single Resonance Cutoff Cutoff EG1 Intensity Off
D01 Uni Synth Synth-Lead Dual
T1 Step Length Panpot Osc2 Semitone
Off
T2 Step Length Panpot Osc2 Semitone
D02 Electrick Seq/Motion Single Cutoff EG1 Intensity Level Panpot Trigger
D03 Zap Bass Synth-Bass Single Pitch Panpot Osc1 Control1 Off
D04 Reactor Pad Strings/Pad Single Step Length Panpot Off
D05 TheMehT Synth-Hard Single Osc2 Semitone Cutoff Osc1 Control2 Off
D06 Astral Vox Synth-Soft Single Osc1 Control2 Cutoff EG1 Intensity Level Off
D07 Water Edge Seq/Motion Dual
T1 Noise Level
Alt2
T2 Pitch Osc2 Level
D08 Phunk Bass Synth-Bass Single Pitch Panpot Cutoff Off
D09 Ana Fuzz Synth-Lead Single Cutoff EG1 Intensity Cutoff Level Off
D10 Deep Bell Percussive/Bell Single Patch 1 Intensity Off
D11 PhaserClav Keyboards Single Level Panpot Cutoff Off
D12 Trip Planet Seq/Motion Dual
T1 Level Osc1 Level Osc2 Semitone
Up
T2 EG2 Decay Time Level Pitch
D13 Glass Synth-Hard Single Pitch Off
D14 ReverseBass Synth-Bass Single Pitch Panpot Cutoff Off
D15 Diginator S.E/Drum Dual
T1 Panpot
Off
T2 Pitch Level
D16 Ana Strings Strings/Pad Single Resonance Cutoff Patch 3 Intensity Off
No. Name Category Mode SEQ 1 SEQ 2 SEQ 3 ARPEGGIATOR
E01 Rez Lead Synth-Lead Single Osc2 Level EG1 Attack Time Off
E02 DWGS WaveSeq Seq/Motion Single Osc1 Control2 Panpot Off
E03 AcidSawBass Synth-Bass Single Cutoff EG1 Intensity Level Panpot Off
E04 TickerPad Strings/Pad Dual
T1 EG1 Decay Time EG2 Sustain Level Osc1 Control2
Alt1
T2 Osc1 Control2 Cutoff
E05 Slippy Pad Synth-Hard Single Pitch Cutoff Panpot Off
E06 Synth Brass Synth-Soft Single Osc2 Semitone Panpot Cutoff Off
E07 S&H Signal Seq/Motion Single Panpot LFO2 Frequency Pitch Up
E08 Magnum Bass Synth-Bass Single Pitch Patch 3 Intensity Cutoff Off
E09 Freq Lead Synth-Lead Single Patch 1 Intensity Off
E10 BleepsPerc Percussive/Bell Single Noise Level Cutoff Pitch Random
E11 Brett Ped Keyboards Single Osc1 Control2 Cutoff EG2 Sustain Level Off
E12 Auto Disco Seq/Motion Dual
T1 Pitch
Up
T2 Cutoff Noise Level
E13 NoisyHit Synth-Hard Dual
T1 EG1 Decay Time
Off
T2 Cutoff Resonance EG1 Decay Time
E14 RingSyncBass Synth-Bass Single Pitch Cutoff Panpot Off
E15 Stutter S.E/Drum Single Patch 4 Intensity LFO2 Frequency Patch 2 Intensity Off
E16 StringMachin Strings/Pad Single Cutoff EG2 Release Time Patch 1 Intensity Off
F01 Far Horizon Synth-Lead Dual
T1 Osc2 Level Osc2 Tune Cutoff
Off
T2 Osc2 Level Osc2 Tune Cutoff
F02 Burnin'Rave Seq/Motion Dual
T1 Cutoff
Trigger
T2 Panpot
F03 Sub Bass Synth-Bass Single Pitch Cutoff Osc1 Control1 Off
F04 Stream Pad Strings/Pad Single Step Length Level EG2 Attack Time Off
F05 Square Comp Synth-Hard Single Cutoff EG1 Intensity EG1 Attack Time Cutoff Off
F06 Organ Bass Synth-Bass Single Pitch Cutoff Panpot Off
F07 Tap Lead Seq/Motion Dual
T1 Cutoff Osc2 Semitone
Up
T2 Pitch Cutoff
F08 Banana Bass Synth-Bass Dual
T1 Pitch Cutoff Panpot
Off
T2 Pitch Cutoff Panpot
F09 UnisonSqurLd Synth-Lead Single Pitch Panpot Cutoff Off
F10 Bound Ball Percussive/Bell Single Osc1 Control1 Panpot Patch 2 Intensity Off
F11 Lounge Organ Keyboards Single Panpot Cutoff Off
F12 Zoop Mania Seq/Motion Dual
T1 Patch 4 Intensity EG2 Decay Time Pitch
Down
T2 Osc2 Level Osc1 Control1 Level
F13 "M3rd"Chord Synth-Hard Dual
T1
Off
T2 Osc2 Semitone
F14 Jami Bass Synth-Bass Single Osc2 Level Cutoff Resonance Off
F15 Bad Dream S.E/Drum Single LFO1 Frequency Cutoff Panpot Off
F16 Need4Speed Seq/Motion Single Pitch Cutoff EG1 Intensity Trigger
G01 Turn Wheel Synth-Lead Single Osc2 Level Osc1 Control1 LFO1 Frequency Off
G02 Trip 2 Ibiza Seq/Motion Single Cutoff Off
G03 80's Bass Synth-Bass Single Pitch Cutoff Noise Level Off
G04 Motion Pad Strings/Pad Single Patch 1 Intensity Patch 2 Intensity Off
G05 Golden Synth Synth-Hard Single Osc2 Tune Off
G06 NuSkoolDrop Synth-Bass Single Patch 1 Intensity Osc1 Control1 Off
G07 Synth Lana Seq/Motion Single Panpot Pitch Step Length Up
G08 MG Bass Synth-Bass Single Pitch Cutoff Panpot Off
G09 Bass&5thLead Split Prog Split
T1 Pitch Patch 3 Intensity Cutoff
Off
T2 Panpot Cutoff Step Length
G10 ElectroShock Percussive/Bell Dual
T1 Pitch Cutoff
Up
T2 Cutoff
G11 Pulse Comp Keyboards Single Panpot Level Osc2 Level Off
G12 Snow&Ice Split Prog Split
T1 Osc1 Control2 Osc1 Control1
Off
T2 Osc2 Semitone
G13 Century Stab Synth-Hard Single Patch 1 Intensity Cutoff EG1 Intensity EG1 Decay Time Off
G14 Drive Bass Synth-Bass Single Resonance EG2 Release Time Off
G15 DooM S.E/Drum Single Pitch Cutoff Osc2 Semitone Off
G16 stROBOsCOPe Split Prog Split
T1 Pitch Cutoff Cutoff EG1 Intensity
Alt1
T2 Osc2 Semitone Cutoff Panpot
H01 CleanVocoder Vocoder Prog Vocoder Off
H02 WispaVocoder Vocoder Prog Vocoder Off
H03 DarkVocoder Vocoder Prog Vocoder Off
H04 Vocoder Ens Vocoder Prog Vocoder Off
H05 Vocoder Cho Vocoder Prog Vocoder Off
H06 Vocoder 5th Vocoder Prog Vocoder Off
H07 Bass Vocoder Vocoder Prog Vocoder Off
H08 VoiceChanger Vocoder Prog Vocoder Off
H09 VocoderPulse Vocoder Prog Vocoder Off
H10 Vocoder Squ Vocoder Prog Vocoder Off
H11 Vocoder Wah Vocoder Prog Vocoder Off
H12 Vocoder Vox Vocoder Prog Vocoder Off
H13 Vocoder DWGS Vocoder Prog Vocoder Off
H14 Vocodevil Vocoder Prog Vocoder Off
H15 AudioIn INIT AudioIn Single Trigger
H16 INIT Program Init Prog Single Off
  • Page 1 1
  • Page 2 2

Korg MS2000B Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à